ONKYO TX-NR838 Manuale del proprietario

Marca: ONKYO

Modello: TX-NR838

Categoria: Ricevitori AV

Tipo: Manuale del proprietario

TX-NR838

AV RECEIVER

Basic Manual



Advanced Manual found here

http://www.onkyo.com/manual /txnr838upg/adv/en.html

Before Start

About the Basic Manual

The Basic Manual leads you through the fundamental steps

to enjoy the AV Receiver from connections to TV, speaker

system and playback components, to necessary functions

for playback. As well as that, Basic Manual informs you with

the instructions on frequently used functions. Besides, there

is another part of the manual called Advanced Manual to

inform you with more detailed information, which we have

decided to publish on the web from the ecological point of

view.

Advanced Manual

Advanced Manual is always updated with the latest

information and its user friendly interface, which does not

matter whether you access from PC or Smartphone, helps

you to understand more deeply about the AV Receiver.

Advanced Manual is consisted of the following chapters.

 AM/FM Radio Receiving Function

 Playing Music Files on a USB Storage Device

 Listening to Internet Radio

 Playing Music with DLNA

 Playing Music Files in a Shared Folder

 Operating Music Files with the Remote Controller

 Listening Mode

 Advanced Settings

 Operating Other Components with the Remote Controller

 Advanced Connection

 Connecting and Operating Onkyo RI Components

 Control Function between the Unit and External

Component

 Firmware Update

 Troubleshooting

 Reference Information

Advanced Manual found here

http://www.onkyo.com/manual/txnr838upg/adv/en.html

Features

 Equipped with 7 channel amplifier

 Supports playback in Dolby Atmos format which provides

360-degree placement and movement of sounds

including overhead sound

 Dolby Surround listening mode expands 2 ch, 5.1 ch or

7.1 ch source to available speaker configurations

 THX Select2 Plus certified

 Incorporates Qdeo™ technology for HDMI video

upscaling

 Equipped with 4K/60 Hz Passthrough-compatible HDMI

IN/OUT jacks (IN1 to IN4 of HDMI IN jacks are 4K

compatible)

 Supports the HDMI Through function which allows

transmission from playback devices to the TV in standby

state

 Supports HDCP2.2, a strict copy-protection for providing

high quality content (HDMI IN3/OUT MAIN only)

 Supports ARC (Audio Return Channel)

 Supports USB storage playback

 Supports variety of network functions such as Internet

Radio, DLNA, etc.

 Supports Wi-Fi, Bluetooth and MHL-enabled mobile

device

 Bi-Amping capability

 A/V Sync Control Function to correct deviation of audio

and video

 Multi-zone function which allows you to play a different

source in another room from the main room (Video can

also be played in Zone 2)

 32 bit DSP (Digital Signal Processor) with excellent

calculation performance

 Music Optimizer™ for Compressed Digital Music files

 Phase Matching Bass System

 Automatic speaker setup available using supplied

calibrated microphone (AccuEQ Room Calibration)

 Supports playback of MP3, WMA, WMA Lossless, FLAC,

WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD

via network and USB storage device (the supported

formats will differ depending on the use environment)

Supplied Accessories

Indoor FM antenna --- (1)

AM loop antenna --- (1)

Speaker Cable

Color labels for speaker cable --- (1)

Remote controller (RC-882M) --- (1)

Batteries (AA/R6) --- (2)

Power cord --- (1)

Speaker setup microphone --- (1)

¼

The number in parenthesis indicates the quantity. On packaging, the

letter at the end of the product name indicates the color.

How to use the remote controller

Batteries (AA/R6)

Remote control sensor



(5 m)

AV Receiver

¼

If you do not use the remote controller for a long time, remove the

batteries to prevent leakage.

¼

Note that keeping consumed batteries inside may cause corrosion

resulting in damage of the remote controller.

Step 1:

Connections

Connecting the TV and players

Important: The power cord must be connected only after all

other connections are completed.

HDMI Cable Connection

The unit has many HDMI jacks on its rear panel and each

of them corresponds to an input selector button of the

same name on the front panel. For example, a Blu-ray

Disc player will be connected to the HDMI IN1 jack and the

BD/DVD button on the front panel will be used to listen to

the playback sound (if the player is CEC compliant, input

will be switched automatically). If you add another Blu-ray

Disc player, you can use any other jack than HDMI IN1. It

is possible to change assignment of the input jacks and

input selector buttons. For how to make settings, see the

Advanced Manual.

To connect the TV and the unit, connect the HDMI OUT MAIN

jack of the unit and the HDMI IN jack of the TV using an HDMI

cable. With this connection, it becomes possible to display

the setting screen of the unit on the TV or transmit video/

audio signals from the player to the TV. If your TV supports

ARC (Audio Return Channel), it is possible to play the TV

sound with the AV receiver's speakers with this connection

only. If your TV does not support ARC, you need, in addition

to the HDMI OUT MAIN jack connection, a digital optical cable

connection between the digital audio out optical jack of the

TV and the DIGITAL IN OPTICAL jack of the unit or an analog

audio (RCA) cable connection between the audio output jack

of the TV and the VIDEO/AUDIO IN TV/CD jack of the unit.

DIGITAL

OPTICAL

OUT

AUDIO

OUT

z

Audio connection with a TV not supporting ARC

Select an appropriate connection

for your TV.

Another TV can be connected to the HDMI OUT SUB jack.

In this case, press MONITOR OUT on the main unit several

times to display "SUB" or "MAIN+SUB" and select the

output method. With the sub output, the operation screen for

Internet function, USB playback, or Bluetooth playback can

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDM

Blu-ray Disc/DVD player

Set-top box/Digital

video recorder, etc.

Satellite/Cable

set-top box, etc.

Game console

Personal computer

HDMI cable

To use the ARC function, connect to the ARC

compatible HDMI jack of the TV and make an

appropriate setting on the unit. See the section 2 "2nd

Step : Source Connection" of "Step 2: Setting Up".

Step 1:

Connections

be displayed. It is also possible to use the multi-zone function

with this jack. For details, see the section 6 "Using the multi-

zone function" of "Step 3: Playing Back".

The unit supports the HDMI Through function that allows

transmission from players to the TV even if the unit is in

standby. You have to modify the settings to enable the input

selection link with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. See "2nd

Step : Source Connection" of "Step 2: Setting Up".

 To enjoy HDCP2.2 protected video, connect the player to

the HDMI IN3 jack and the TV to the HDMI OUT MAIN

jack of the unit. Your player and TV need to support

HDCP2.2.

 To play 4K or 1080p video, use the high speed HDMI cable.

 It is possible to send video and audio of an MHL-enabled

mobile device by connecting the MHL-enabled mobile device

to the AUX INPUT HDMI/MHL jacks on the front panel.

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an

available jack of your component for cable connection with

this unit. Just as the HDMI jacks, other jacks on this unit have

a preassigned input selector button on the front panel. See

the name of the input selector button shown with the jack

when connecting the device.

3 2

145



Audio signal connection

Digital connection: Use a digital optical cable

(OPTICAL) or digital coaxial cable (COAXIAL) for

connection with a player.

Digital optical cable (OPTICAL)

¼

As the digital in optical jack of the unit has a

cover, push in the cable against the cover as it is

turned inside.

Digital coaxial cable (COAXIAL)

Analog connection: Use an analog audio (RCA) cable

for connection with a player.

To enjoy multi-zone playback of audio of a CD player

or such other player without HDMI output jack, you

need to use the analog audio (RCA) cable to connect

the corresponding jacks of the player and this unit.

For details on the multi-zone function, see the section

6 "Using the multi-zone function" of "Step 3: Playing

Back".

Analog audio (RCA) cable

Connection with turntable: If it uses an MM type

cartridge and does not have a built-in audio equalizer,

connect it to the

PHONO jack. If the connected

turntable has a built-in audio equalizer, connect it to the

TV/CD jack.

¼

If it uses an MC type cartridge, install an audio equalizer compatible

with MC type cartridge between the unit and the turntable by

connecting it to the

TV/CD jack. For details, refer to the turntable's

instruction manual.

¼

If the turntable has a ground wire, connect it to the GND terminal of

this unit. If connecting the ground wire increases noise, disconnect it.



Video signal connection

The unit has a video upconversion function. For details, see

the next section.

Use a component video cable to connect a TV

with component video input jacks and a player with

component video output jacks.

Component video cable

¼

Its transmitted video has higher quality than that

of composite video cable.

Use a composite video cable to connect a TV with

composite video input jack or a player with composite

video output jack.

Composite video cable

Video signals input to the composite video input

jack or the COMPONENT VIDEO IN jacks will be

upconverted to HDMI signals and then output from

the HDMI output jack.

Note that it is not possible to convert digital audio

input signals to analog or vice versa.

AV Receiver

¼

When you upconvert video signals input to the

COMPONENT VIDEO IN jacks and output them from

the HDMI OUT jack, set the output resolution of the

player to 480i or 576i. If the input has 480p/576p or

higher resolution, a message prompting you to change

the resolution setting will appear. If your player does

not support 480i or 576i output, use the composite

video jack.

¼

If multiple video signal inputs are put into one input

system, the output will be made in the order of HDMI,

COMPONENT VIDEO, and composite video.

Step 1:

Connections

Connecting speakers

Speaker layout

To enjoy the Dolby Atmos listening mode, Surround back

speak

ers, Height speakers or Wide speakers need to be

installed. The example above uses front Height speakers.

As other types of Height speakers are also applicable, see

the next page for details.

Front speakers

Center speakers

Surround speakers

Subwoofer

Surround back speakers

Height speakers

Wide speakers

 5.1 ch:

"#$%&'

 7.1 ch:

"#$%&'

 Although you can connect all the pairs of

and

speakers, only one pair of them can

output audio at one time. When two or more pairs

are connected, you can switch speakers to play

in the Quick Setup menu that appears when you

press Q SETUP on the remote controller (Speaker

Layout function). For details, see the section 5

"Using Quick Setup menu" of "Step 3: Playing

Back".

 You cannot use Wide speakers when using multi-

zone function. For details, see the section 6 "Using

the multi-zone function" of "Step 3: Playing Back".

Subwoofer with builtin power

amplifier

Surround R

Surround

back R

Surround

back L

Surround L

Center

Front R

Height R

Wide R

Front L

Wide L

Height L

If there is only one

surround back

speaker, connect

it to the BACK L

terminal.

Step 1:

Connections

Characteristics of speaker types

output front stereo sound.

outputs center sounds

such as dialogs and vocals.

create back sound field.

reproduces bass sounds and creates rich sound field.

Connecting

speakers enables playback

in 7.1 ch configuration.

speakers improve sense

of envelopment created by back sound field as well as

seamlessness of back sounds, providing more natural

sound experiences in the sound field.

speakers

produce surround effects on a height plane.

speakers

make the front sound field even wider. This unit performs

optimal sound field processing for the type of the installed

height speakers which is registered in initial settings (with

setup wizard).

Instructions on how to connect speakers

Important

You have to change the setting if any of the speakers



up by viewing the guidance displayed on the TV screen.

Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN. Press RCV

and then HOME on the remote controller. Select "Setup"

- "2. Speaker Setup" - "Speaker Settings" - "Speaker

Impedance" and change the default value from "6ohms"

(Default Value) to "4ohms".

1/2"-5/8"(12-15 mm)

Cut and remove the plastic coating from the end of the

speaker cable, twist the core and connect it to the terminal.

Make correct connection between the unit's jacks and



connection is wrong, a bass sound may become poor due to

reverse phase. Attaching the supplied colored speaker cable

labels to the + side on the both ends of each channel's cable

will help correct connection.

Up to two subwoofers with built-in power amplifier can

be connected to the subwoofer jacks. Set the cut-off

filter selection switch of the subwoofer to DIRECT. If the

subwoofer does not have a cut-off filter selection switch but

has a cut-off frequency adjusting dial, turn it to the maximum

frequency. If your subwoofer does not have builtin power

amplifier, you can connect a power amplifier between the

unit and the subwoofer.

 The speaker setting is 7.2 ch at the time of purchase. You

can change it manually or by using automatic speaker

setting.

 Short-circuiting the + cable and - cable or contacting the

cable core to the rear panel of the unit may cause failure.

Also do not connect two or more cables to one speaker

terminal or one speaker to several terminals.

 Using a speaker with less impedance than the setting

may result in failure.

When using commercially available banana plugs:

Tighten the speaker terminals to the end and then insert

the banana plugs. Do not insert the core of speaker cable

directly into the hole for banana plug of speaker terminal.

(North American models)

Height speakers arrangements

Dolby Laboratories recommends to place the speakers as

described on “Installing speakers in ceiling” to obtain the

best Dolby Atmos effect.

Installing speakers in ceiling

a b

Top Front

c d

Top Middle

Ceiling speakers, etc. are used for maximizing effects in

Dolby Atmos or Dolby Surround listening mode. Install

Top Front speakers midway between the position just

above the listening position and the position just above the

front speakers. Install Top Middle speakers just above the

listening position. You can select

on the unit.

For connection with the unit, use the SPEAKERS HEIGHT/

Bi-AMP terminals.

Step 1:

Connections

Using Dolby Enabled Speakers

e f

Dolby Enabled Speaker (Front)

g h

Dolby Enabled Speaker (Surround)

i j

Dolby Enabled Speaker (Back)

A Dolby Enabled Speaker is specially designed to be used

as a Height speaker. There are two types of Dolby Enabled

Speakers, the one is to be placed on the top board of other

speakers such as front speakers and surround speakers,

and the other is integrated type with the normal speakers.

Dolby Enabled Speakers designed with their output facing

toward the ceiling to create an elevated audio effect in

the Dolby Atmos and Dolby Surround listening modes by

providing sounds echoing off the ceiling. You can select

on the unit. For connection with the unit,

use the SPEAKERS HEIGHT/Bi-AMP terminals.

Other connections

AM/FM Antenna Connections

Connect the antennas to listen to AM/FM broadcast. When

listening to the broadcast for the first time, adjust the

antenna position and orientation to get the best reception.

AM loop antenna (supplied)

Indoor FM antenna

(supplied)

Fix with a tack on

the wall.

(North American models)

(European, Australian

and Asian models)

Assemble the AM loop antenna (supplied).

Network Connection

You can enjoy Internet radio and DLNA by connecting

the unit to LAN. The unit can be connected to the router

with an Ethernet cable or to the wireless LAN router with

Wi-Fi connection. In case of wired connection, connect

the Ethernet cable to the Ethernet port. See "4th Step :

Network Connection" of "Step 2: Setting Up".

Headphones Connection



or ø 6.3 mm) to the PHONES jack on the front panel.

Sound from the speakers will be off while you are using the

headphones.

 If you selected any other listening mode than Pure Audio,

Stereo, Mono and Direct, connecting headphones will

switch the listening mode to Stereo.

Step 2:

Setting Up

Important: When the unit is turned on for the first time, the

setup wizard of the section 2 will automatically be launched.

If you use the setup wizard to make the initial setup,

connect a TV to the HDMI OUT MAIN jack of the unit via

HDMI connection.

Turning the power on

Connect the power cord to the outlet. Press

ON/

STANDBY on the main unit or

RECEIVER on the remote

controller to turn the unit on or to standby mode.

Initial Setup

HOME Exit

Language Select

English

Deutsch

Français

Español

Italiano

Nederlands

Svenska

¼

This unit includes a removable power cord. Connect the power cord to

AC INLET of the unit and then connect to the outlet. Always disconnect

the outlet side first when disconnecting the power cord. When the unit is

turned on, a large instantaneous current may flow affecting functionality

of the computer and other devices. It is recommended to use a separate

outlet from that for the computer or such other sensitive devices.

Firmware update notification: If the unit is connected

via LAN and there is firmware update available, the

"Firmware Update Available" message will appear. To

execute updating, select "Update Now" with the cursor

buttons of the remote controller and press ENTER. When

"Completed!" appears, press

ON/STANDBY on the main

unit to turn the unit into standby mode. Then updating will

be completed.

 The unit automatically turns itself into standby mode



this case also, updating will be completed.

Making the Initial Setup with the Setup

Wizard

Read before starting the procedure: Set up by

answering the guidance displayed on the TV screen.

Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection.

To return to the previous screen, press RETURN.

 If you terminate the procedure on the way or

change the setting made in the initial setup and

want to call up the setup wizard again, press RCV

and then HOME on the remote controller, select

"Setup" - "7. Hardware Setup" - "Initial Setup", and

press ENTER.

Select the language first. In the next screen, the summary

of the setup wizard as below will be displayed. Select "Yes"

in this screen and press ENTER on the remote controller.

Welcome to initial setup. Have you connected all the speakers and devices?

Before starting, please connect speakers and sources.

Now, would you like to start initial setup?

1st Step : AccuEQ Room Calibration

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Yes

Initial Setup

ExitHOME

The setup wizard proceeds in the four steps as below.



1st Step : AccuEQ Room Calibration



2nd Step : Source Connection



3rd Step : Remote Mode Setup



4th Step : Network Connection



1st Step : AccuEQ Room Calibration

The test tone coming from each speaker will be measured to

enable setting of the number of speakers, volume level, each

speaker's optimum crossover frequencies, and distance from

the primary listening position, and also enable correction of

distortion caused by the room acoustic environment.

 You cannot return to the previous screen during speaker

setup, even if you press RETURN.

Initial Setup

AccuEQ Room Calibration

This step you can automatically calibrate

your room to get correct surround sound.

Would you like to cailbrate your room now

or later?

Do it Now

Do it Later

ExitHOME

Place the speaker setup microphone.

When the start screen above is displayed, before

starting the procedure, place the supplied speaker setup

microphone at the measurement position



by referring

to the figure below.

Listening area Measurement position

with microphone

¼

Correct measurement will not be possible if the microphone is held by

hand. Measurement is not possible if headphones are being used.

¼

The subwoofer sound may not be detected since it is extremely low

frequencies. Raise the subwoofer volume to around the half of its

maximum volume and make its frequency to the maximum level.

¼

A loud test tone will be heard during measurement. Measurement may

be interrupted if there is ambient noise or radio frequency interference.

Close the window and turn off the home appliance and fluorescent light.

Step 2:

Setting Up

After placing the microphone at the measurement

position, select "Do it Now" with the cursors and

press ENTER.

When "Please plug microphone that came in a

box with AV receiver." is displayed, connect the

microphone to the SETUP MIC jack of the unit.

SETUP MIC jack

Speaker

setup

microphone

Follow the guidance displayed on the TV screen.

AccuEQ Room Calibration

Front Speakers Type

Height Speakers Type

Powered Zone 2

Subwoofer

Normal

Not Use

Yes

Set bi-amp only if you use 2 channel amp for each front speaker.

ENTER Nex t

When the screen above is displayed, set the items with

the cursors on the remote controller. Select the types for

height speakers if the height speakers are used. Confirm

the power supply of subwoofer and press ENTER on the

remote controller in the next screen. Confirm the position

of speaker setup microphone and press ENTER on the

remote controller in the next screen.

 When the cursor is on an item, the content of the item

will be shown on the lower left of the screen.

The test tones sound from the connected speakers

and automatic speaker setting starts.

Measurement will be made twice for each speaker. It

takes several minutes to be completed. Keep the room

as quiet as possible during measurement. If any of

the speakers do not produce the test tone, check for

disconnection.

 During measurement, each speaker outputs the test

tones at a high volume. Be careful of sound leak

that may disturb your neighbors, or be careful not to

frighten young children.

When the measurement is completed, the

measurement result is displayed.

Press

on the remote controller to check the

settings. Press ENTER with "Save" selected. In the next

screen showing that "AccuEQ" is "On", press ENTER on

the remote controller.

 If there is an error message, follow the on-screen

instruction to remove the error cause.

About THX playback

THX recommends setting the speakers manually if

you use THX-certified speakers or playing back with

THX listening modes.

 THX recommends setting the crossover frequency

to “80Hz(THX)” manually.

 Due to the electrical complexities and the

interaction with the room, you may notice irregular

results when setting the level or distance of each

speaker. If this happens, THX recommends setting

the speakers and the subwoofer manually.

When "Please unplug setup microphone." is

displayed, disconnect the microphone.



2nd Step : Source Connection

You can check whether or not each input source is

connected correctly.

When the Source Connection start screen is

displayed, select "Yes, Continue" with the cursors

and press ENTER.

This step will start to check if the

connections were made correctly.

Would you like to continue?

Yes. Continue

No. Skip

Initial Setup

Source Connection

ExitHOME

Select the desired input to check the connection and

press ENTER.

Start playback of the selected device. If connection is

correct, video/audio of the input source selected on the

unit will be played.

After checking the connection, select "Yes" with the

cursors and press ENTER.

 If you select "No" and press ENTER, the error cause

will be displayed. Follow the guidance to remove the

error cause and check the connection again.

Select "Yes" with the cursors and press ENTER

on the remote controller to check the connection

of other inputs or select "No, Done Checking" and

press ENTER to skip.

If you select "Yes", you will return to the screen of step 2.

If you select "No, Done Checking", you will proceed to step 5.

Enabling HDMI Linked Operation and Other

Functions

In the next screen, you can enable the HDMI linked

operation with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. Select

"Yes" with the cursors to enable them or "No, Done

Checking" to skip, and press ENTER on the remote

controller.

Select "Yes" with the cursors and press ENTER to

enable the CEC link function or select "No" and

press ENTER to keep it disabled.

The following CEC-compatible devices are found;

Do you wish to turn on the CEC link?

Integra DHS-8.8

Yes

Source Connection

ExitHOME

If you select "Yes", the connection with ARC compatible

TV and HDMI Through function will be set to "Auto" and

enabled.



3rd Step : Remote Mode Setup

HOME E x it

Initial Setup

Remote Mode Setup

Preprograming remote will give you control

of other devices from AV receiver remote

Would you like to setup your remote to

control your devices? This may take a while

depending on what and how many you have

connected. You can always come back to remote

setup from setup “8-2 Remote Mode Setup”.

Yes

No. Skip

Step 2:

Setting Up

In this step, you can enable operation of the other

components using the remote controller of the unit. When

the Remote Mode Setup start screen is displayed, select

"Yes" with the cursors and press ENTER on the remote

controller. Follow the guidance to select the desired

REMOTE MODE button and in the keyboard screen, enter

the first three characters of the brand name of the device

you are going to program (e.g., "ONK" for ONKYO) and

search for the remote control code. The guidance will also

explain how to set the remote controller.



4th Step : Network Connection

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select “No. Skip”.

Yes

No. Skip

HOME E x it

Initial Setup

Network Connection

You can check the network connection and make the Wi-

Fi setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the Ethernet cable connection status.

To make the Wi-Fi setting, select "Wireless", press ENTER

on the remote controller and follow the sections below.

Make the following preparations.

Wi-Fi connection requires an access point such as

wireless LAN router (

). Write down the SSID and

password (key) of the access point if they are shown

in the label of the main body. If the access point has

an automatic setting button (may be called differently

according to the manufacturer), you can set up

without inputting the password. For how to use the

automatic setting button of the access point, refer to

its instruction manual.

¼

The unit supports Wi-Fi connection with 2.4 GHz access

point.

Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

 If you changed the initial setting of the access point to

skip password entry, step 3 starts automatically.

 If you changed the initial setting of the access point

to hide the SSID, see "When the access point is not

displayed".

Select and set the authentication method.

The "Enter Password" screen, instead of the following

screen, may be displayed automatically if the wireless

LAN router does not have an automatic setting button.

Wi-Fi Setup

Select the authentication method.

Enter Password

Push Button

PIN code

When the screen above is displayed, select and set one

of the three authentication methods: "Enter Password",

"Push Button" and "PIN code". See below for details of

and how to set each method.

Enter Password: Enter the password of the access point to

establish connection.

Select "Enter Password" with the cursor buttons and

press ENTER.

Enter the password (

) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

¼

Select "Shift" and press ENTER to toggle between upper and lower

case. Select "



" or "



" and press ENTER to move the cursor to the

selected direction. Select "Back Space" and press ENTER to delete

the character at the left of the cursor position. To select whether to

mask the password with "

" or display it in plain text, press D on the

remote control. Press + 10 on the remote controller to enable the

"Shift" function and CLR to delete all the input characters.

If the security method of the access point to be

connected is WEP, select "Default Key ID", select "OK"

and press ENTER.

Push Button: Use the automatic setting button of the

access point to establish connection.

Select "Push Button" with the cursor buttons and press

ENTER.

Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the

cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting

button of the access point is beyond the reach.

Select "PIN

code" with the cursor buttons and press ENTER to display

the 8-digit PIN code. Register the displayed PIN code to the

access point, select "OK" with the cursor buttons and press

ENTER. For how to register the PIN code to the access

point, refer to its instruction manual.

Establish connection.

The connection process starts and the Wi-Fi indicator

on the left of the unit's display starts flashing. When

connection has been established, the Wi-Fi indicator

changes from flashing to staying lit. If the Wi-Fi indicator

does not stay lit, connection has not been established.

Make the setting again. If "Push Button" does not work,

try "Enter Password".

When the access point is not displayed

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.



WPA/WPA2 method

Select "WPA" or "WPA2" in "Security Method", select

"OK" and press ENTER.



WEP method

Select "WEP" in "Security Method" and select

"Default Key ID". Then select "OK" and press ENTER.

 If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

Method", select "OK" and press ENTER.



Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now completed. See Step 3 and enjoy

your home theater.

Step 3:

Playing Back

Playing the player and TV

To control the unit: The remote controller of this unit has

the remote mode function for controlling other devices. You

cannot control this unit when the remote controller is in the

remote mode other than RECEIVER mode (for controlling

this unit). Be sure to press

RCV to select the RECEIVER

mode before starting operation.

Turning the power on

Press

RECEIVER on the remote controller to turn

the power on.

 Switch the input on the TV to that assigned to the

unit. Use the TV's remote controller.

Select the input of the unit and start playback on the

player or TV.

Press

INPUT SELECTOR to which the desired player

has been assigned. Press TV/CD to play the TV's sound.

You can also use the input selector buttons on the main

unit.

 Input will automatically be selected if the TV or player

is CEC compliant and connected to the unit with

HDMI cable.

Select the desired listening mode.

Press

listening mode buttons to switch the mode so

that you can enjoy different listening modes. For details

about the listening modes, see "Listening modes" on the

next section.

Adjust the volume with

Remote Controller Parts Name

RECEIVER button: Turns the unit on or into standby

mode.

RCV button: Switches the remote controller to the

mode for operating this unit.

REMOTE MODE/INPUT SELECTOR button: Switches

the input to be played.

Cursor buttons and ENTER button: Moves the cursor

and confirms the selection.

Q SETUP button: Displays the Quick Setup menu that

allows you to set the frequently used functions including

input selection and volume adjustment.

Listening mode buttons: Allows you to select the

listening mode.

DIMMER button: Switches the brightness of the display.

This button also turns MASTER VOLUME indicator on

and off.

ZONE2 button and ZONE3 button: For use when

the unit is connected with an integrated amplifier in a

separate room and sound is played there.

MUTING button: Temporarily mutes audio.

VOLUME buttons: Allows you to adjust the volume. This

button also cancels the muting.

RETURN button: Returns the display to the previous

state.

HOME button: Displays the HOME menu that allows

you to make advanced settings and use Internet radio

and DLNA.

DISPLAY button: Switches the information on the

display.

 The buttons other than those above are for operating

other devices.

Step 3:

Playing Back

Listening Modes

You can select a listening mode from various options such

as Dolby Atmos, Dolby Digital and DTS. Select the desired

mode by switching and listening actual sound in different

modes. The selectable listening modes depend on the

format of the input signals.

MOVIE/TV: You can select a listening mode suitable for

movies and TV programs.

MUSIC: You can select a listening mode suitable for music.

GAME: You can select a listening mode suitable for games.

THX: You can select a THX listening mode.

PURE AUDIO (main unit only): The display and analog

video circuits are cut off to provide purer sound.

 For details on the listening modes, see the Advanced

Manual.

"Direct" for playing the input signals as-is

Selecting this mode allows the input signals to be

played as they are. For example, 2 ch signals of music

CD will be played in stereo, 5.1 ch signals in 5.1 ch,

and Dolby Digital signals of blu-ray disc or DVD in the

Dolby Digital sound field according to the specified

number of channels.

Other Useful Functions



Playing Video and Audio from Different Sources: It is

possible to play audio and video from different sources. For

example, you can play audio from the CD player and video

from the BD/DVD player.

In this case, press BD/DVD and

then TV/CD. Then start playback on the BD/DVD player and

CD player. This function is effective when an input with audio

only has been selected (TV/CD, TUNER or PHONO in the

initial setting).



Adjusting Sound Quality: It is possible to enhance

or moderate the low and high pitched ranges of front

speakers. Press TONE on the main unit several times to

select the desired setting from "Bass", "Treble", and "Phase



 It cannot be set if the listening mode is Pure Audio, Direct

or THX.

"Bass": Allows you to enhance or moderate the low

pitched range.

"Treble": Allows you to enhance or moderate the high

pitched range.

"Phase Matching Bass": Allows you to keep the clear

midrange and effectively enhance the low pitched range.



Muting Temporarily: Press MUTING on the remote

controller. To cancel the muting, press MUTING again, or

press VOL



Changing the Display Brightness: Press DIMMER on

the remote controller. The display brightness changes each

time you press the button.



Checking the Input Format: Press DISPLAY on the

remote controller several times to switch the display of the

main unit in order of:

Input source &

volume

Listening mode

Signal format

Sampling

frequency

Input signal

resolution

Output resolution



If "Dolby D 5.1" is displayed in signal format, the Dolby

Digital 5.1 ch signals are being input. When listening to

AM/FM radio, the band, frequency and preset number

are displayed.

Listening to AM/FM Radio

The Basic Manual explains the method using automatic

tuning. For manual tuning, see the Advanced Manual.

Press TUNER on the main unit several times to

select either "AM" or "FM".

Press TUNING MODE on the unit, so that the "AUTO"

indicator on the display lights.

Press TUNING on the unit.

The automatic tuning to a radio station starts. Searching

stops when one is tuned. When tuned into a radio

station, the "

TUNED " indicator on the display lights.

The "FM STEREO" indicator lights if the radio station is

an FM radio station.

TUNED

FM STEREO

AUTO

(Actual display varies depending on the country.)

Registering an AM/FM Radio Station: It allows you to

1. Tune into the AM/FM radio station you want to

2. Press MEMORY on the unit.

The preset number on the display flashes.

3. Repeatedly press PRESET

on the unit to select

a number between 1 and 40 while the preset number

is flashing (about 8 seconds).

4. Press MEMORY on the unit again.

When registered, the preset number stops flashing.

To select a preset radio station, press PRESET



Step 3:

Playing Back

Connecting and playing the Bluetooth-

enabled device

You can wirelessly enjoy music files stored in a smartphone

or other Bluetooth-enabled device. The coverage area is



 The Bluetooth-enabled device needs to support the

A2DP profile.

 Note that connection is not always guaranteed with all

Bluetooth-enabled devices.

Pairing

Pairing is necessary when using the Bluetooth-enabled

device for the first time. Before starting the procedure, learn

how to enable the Bluetooth setting function and to connect

with other devices on the Bluetooth-enabled device.

Press BLUETOOTH on the remote controller.

The unit enters the pairing mode and the BLUETOOTH

indicator starts flashing.

While the BLUETOOTH indicator is flashing,

complete connection on the Bluetooth-enabled

device in the nearby area within about 2 minutes.

If the name of this unit is displayed on the Bluetooth-

enabled device's display, select this unit. Paring will be

completed after a short time.

 If a password is requested, enter "0000".

 When connecting the unit to any other Bluetooth-

enabled device, start pairing by holding down

BLUETOOTH until the BLUETOOTH indicator starts

flashing. This unit can store the data of up to eight

paired devices.

Playing Sound of the Bluetooth-enabled Device

If the unit is on and the Bluetooth-enabled device is

connected, the input will be automatically switched to

BLUETOOTH. Play music in this state.

 It may take about a minute until connection is established

when the unit is on since the Bluetooth function takes

some time to start up.

 If the volume setting on the Bluetooth-enabled device is

low, the sound will not be output from this unit.



Due to the characteristics of Bluetooth wireless technology,

the sound produced on this unit may slightly be behind the

sound played on the Bluetooth-enabled device.

Using the HOME menu

In the HOME menu, you can make advanced setup and

use Internet radio and DLNA function. For details on the

operation, see the Advanced Manual.

After pressing RCV, press HOME on the remote

controller.

The HOME menu is displayed on the TV screen. You can

also use the HOME button on the main unit.

Setup

HOME

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

To return to the previous screen, press RETURN. To

return to the Home menu, press HOME.



Sleep Timer: Select to turn the unit into standby mode

automatically when the specified time elapses.



InstaPrevue: Select to preview videos input from the

HDMI input jacks collectively in a single screen. The screen

has a main window (current input video) and sub windows

(other input videos). To switch the current input, select the

desired sub window with the cursor buttons and press

ENTER.

 A black sub window is shown for the input with no video

signals.

 "InstaPrevue" cannot be selected if the video is being

input from HDMI IN 5 or 6 or if there is no signal from the

input currently selected.

 "InstaPrevue" cannot be selected if "Setup" - "1. Input/

Output Assign" - "Monitor Out" - "Zone 2 Monitor Out" is

set to "Use" in the Setup menu, and Zone 2 is on.

 Depending on video signals, the picture may not be

properly rendered on the preview thumbnails.

 1080p or higher resolution is not supported.



Setup: You can change the assignment of input

terminals and input selector buttons and also make various

speaker settings and other advanced settings.



Network Service: Select to use Internet radio services

and the DLNA function.

When you connect the unit to the

network and press ENTER, the network service screen will

be displayed on the TV. On the TV screen, select the desired

service or music file with the cursors of the remote controller

and press ENTER to confirm and start playback.

Internet radio service: You can listen to TuneIn or such

other Internet radio stations registered in advance.

DLNA : You can play music files stored in the PC or

NAS device connected to the network.

Select the server

with the cursors, select the desired music file and press

ENTER to start playback.

Home Media: You can play music files in a shared folder

on the PC or NAS device connected to the network.

Select the server with the cursors, select the desired

music file and press ENTER to start playback.

 "Network Service" becomes selectable after the network

starts up even if it cannot be selected first. It may take

about a minute to start up.

 When "Network Service" is selected for the first time,

the "DISCLAIMER" screen will appear on the TV.

Select

"Agree" if you agree the content. If you do not agree the

content, you cannot use the network service.

¼

You cannot use the Network Service function unless the TV is

connected via HDMI since selecting "Agree" in the "DISCLAIMER"

screen is not possible.

 Layout of the icons in the "Network Service" top menu

can be changed. Press NET on the remote controller

and press D. Select the source icon with the cursors and

press ENTER, and then select the destination icon and

press ENTER. The positions of the icons are switched

each other.



USB: Select "USB" in the TV screen and connect a

USB storage device to the USB port on the front panel. On

the TV screen, select the desired folder or music file with

the cursors of the remote controller and press ENTER to

confirm and start playback.

 "USB" becomes selectable after the USB function starts

up even if it cannot be selected first. It may take about a

minute to start up.

Step 3:

Playing Back

Using Quick Setup menu

In the Quick Setup menu, you can set frequently used

functions including input selection and volume adjustment.

Press Q SETUP on the remote controller.

The Quick Setup menu is displayed on the connected

TV's screen.

CBL/SAT

Input

Audio

Video

Information

Listening Mode

BD DVD

CBL/SAT

STB DVR

GAME

AUX

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

To return to the previous screen, press RETURN.



Input: Select the input and check the assignment of

input selector buttons.



Audio : You can perform various audio settings including

audio quality and speaker level adjustment.

 You cannot select this item when audio is output from the

TV's speakers.

A/V Sync: If the video is behind the audio, you can

delay the audio to offset the gap. Different settings can

be set for each input.

 It cannot be set if the input is "NET", "USB" or

"BLUETOOTH".

 It cannot be set if the listening mode is Pure Audio or

Direct.

Bass, Treble: Adjust volume of the front speaker.

 It cannot be set if the listening mode is Pure Audio,

Direct or THX.

Phase Matching Bass: Suppress phase shift in the

midrange to enhance bass sound. Thus smooth and

powerful bass sound can be obtained.

 It cannot be set if the listening mode is Pure Audio,

Direct or THX.

Subwoofer Level, Center Level: Adjust the speaker

level while listening to the sound.

The adjustment you

made will be reset to the previous status when you turn

the unit to standby mode.



The speakers cannot be adjusted if they have been



"Speaker Configuration".

AccuEQ Room Calibration: Disable the sound field

set in the automatic speaker setting. The setting can be

separately set to each input.

 This setting cannot be selected if the automatic

speaker setting has not been performed.

 It cannot be set if headphones are connected or the

listening mode is Pure Audio or Direct.

Late Night: Make small sounds to be easily heard. It

is useful when you need to reduce the volume while

watching a movie late night. You can enjoy the effect

on Dolby Digital, Dolby Digital Plus and Dolby TrueHD

sources only.

 Turning the unit to standby mode will set the setting

to "Off". In case of Dolby TrueHD, the setting will be

set to "Auto".

 You cannot use the function during Dolby TrueHD

playback if "Setup" - "3. Audio Adjust" - "Dolby" -

"Loudness Management" is set to "Off".

Music Optimizer: Improve the quality of the

compressed audio. Playback sound of lossy

compressed files such as MP3 will be improved. The

setting can be separately set to each input.

 The setting is effective in the signals of 48 kHz or

less. The setting is not effective in the bitstream

signals.

 It cannot be set if the listening mode is Pure Audio or

Direct.

Re-EQ, Re-EQ (THX): Adjust the soundtrack that was

processed to enhance its high pitch range, in order to

make it suitable for home theater.

 In Re-EQ, the following listening modes can be used:

Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema,

DTS 96/24, DTS Neo:6, DTS-HD High Resolution

Audio, DTS-HD Master Audio, and DTS Express.

 In Re-EQ (THX), the following listening modes can

be used: THX Cinema, THX Surround EX, and THX

Select2 Cinema.

Speaker Layout: You can give priority to surround back

speakers, height speakers or wide speakers when they

are all connected.

 The speakers cannot be selected if they have been

set to "None" in "Setup" - "2. Speaker Setup" -

"Speaker Configuration". Also the setting cannot

be changed if any two or more of surround back

speakers, height speakers and wide speakers are set

to "None".

 The setting cannot be used in the following cases.

–

"Setup" - "2. Speaker Setup" - "Front Speakers

Type" is set to "Bi-Amp".

– The listening mode being used is not compatible

with surround back speakers, height speakers or

wide speakers.



Video:

Monitor Out: The video input signals input to the unit

will be converted by the unit when they are output from

the HDMI OUT jack to the TV so that their resolution can

match that of the TV used. Select the HDMI OUT jack to

be used for output.

Wide Mode: You can set the aspect ratio.

Picture Mode: You can adjust the image quality.

"Cinema" will automatically adjust the image to be

suitable to watch movie and "Game" suitable to play

game. In "Standard", the resolution will be changed but

the image quality will not be adjusted. In "Custom", you

can adjust the brightness, contrast, hue and saturation

as desired. If you do not adjust the resolution and image

quality, select "Bypass".

 "Wide Mode" and "Picture Mode" can be set only on the

video output from the HDMI OUT MAIN jack.

 "Video" cannot be selected if the input is "NET", "USB" or

"BLUETOOTH".



Information:

Audio: Displays the audio input source, format, number of

channels, sampling frequency, listening mode, number of

output channels, and other audio information.

Video: Displays the video input source, resolution, signal

format, color tone, 3D information, Aspect, Picture Mode,

output, and other Video information.

Tuner: Displays the band, frequency, preset number, and

other tuner (radio) information.



Listening Mode: Select the listening mode from the

categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".

 It cannot be set when audio is played from the TV's

speakers.

Step 3:

Playing Back

Using the multi-zone function

The function allows you to connect the unit with a TV or

audio equipment placed in a separate room so that you can

enjoy audio and video of the connected equipment even if

you are staying in a different room. It is possible to perform

playback in the main room and a separate room at the

same time, for example by playing the Blu-ray Disc player

in the main room where the unit is placed while playing

Internet radio in a separate room. It is also possible to

perform playback only in a separate room. There are three

methods to configure multi-zone connection as described

in "a" to "c" in the next section. Simultaneous playback in all

zones is also possible.

Zone 2

Zone 3

Main room

The sources from which you can enjoy the sound in

a separate room: For Zone 2, any can be selected from

among an external device connected to the HDMI input jack

(

1) or the analog audio input jacks (

2) of the unit, the

"NET", "USB" or "BLUETOOTH" source, and the AM/FM

broadcasting. For Zone 3, any can be selected from among

an external device connected to the analog audio input

jacks (

2) of the unit, the "NET", "USB" or "BLUETOOTH"

source, and the AM/FM broadcasting.

1 Supported by HDMI IN1 to IN4 and AUX Input HDMI/MHL jacks.

2 When you connect a CD player or such other player without HDMI

output jack, connect it to the analog audio input jacks of the unit.

Multi-zone output is not possible if the connection is only with digital

optical cable or digital coaxial cable. In case of analog connection,

analog audio output setting may be necessary on the player.

 As for HDMI input and analog audio input, it is possible

to play the same source or different sources in the main

room and separate room.

 As for the "NET", "USB" and "BLUETOOTH", you cannot

select different audio sources for the main room and

separate room. For example, if "NET" has been selected

in the main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

 When listening to AM/FM broadcasting, you cannot

select different stations for the main room and separate

room. Therefore broadcasting of the same station will be

heard in the both rooms.

 If you play the same HDMI connected player for the main

room and a separate room, the sound field processing

for 2 ch PCM signals will be made in the main room.

Outputting Video/Audio to a Separate Room



a. Connecting a TV in a Separate Room

You can play video and audio of the HDMI connected

player on the TV in a separate room. With an HDMI cable,

connect between the HDMI OUT SUB/ZONE 2 jack of the

unit and the HDMI IN jack of the TV in a separate room.

Zone 2

Change the setting: Press RCV and then HOME on the

remote controller, select "Setup" - "1. Input/Output Assign" -

"Monitor Out" - "Zone 2 Monitor Out" and set the setting to

"Use".

 You can view the information of the connected device on

the TV of Zone 2. Press ZONE 2 and then DISPLAY on

the remote controller.

 The CEC link function does not work with the TV in a

separate room.

 The volume should be adjusted with the TV used in the

separate room.

Step 3:

Playing Back

Listening to Music in a Separate Room



b. Connecting an Integrated Amplifier in a

Separate Room

It is possible to play 2-channel source in a separate room

while 7.2-channel source is being played in the main room.

Connect the PRE/LINE OUT ZONE2 jacks or PRE/LINE

OUT ZONE3 jacks of the unit and the line-in jacks of the

pre-main amplifier in a separate room with an analog audio

(RCA) cable.

Zone 2 Zone 3

 Volume can be adjusted with both the unit and the pre-

main amplifier used in a separate room. To adjust it with

the unit, press RCV and then HOME on the remote

controller, select "Setup" - "7. Hardware Setup" - "Multi

Zone" - "Zone 2 Out" or "Zone 3 Out" and set the setting

to "Variable". If you connect a power amplifier, be sure to

make the setting and adjust the volume on this unit.



c. Connecting Speakers in a Separate Room

It is possible to directly connect the speakers in another

room without an amplifier. Connect the speakers in another

room to the SPEAKERS WIDE/ZONE2 terminals of the unit

using speaker cables. Note that 5.2 ch will be the maximum

(

)

in the main room during Zone 2 playback. Sound

cannot be output from the Surround Back speakers, Height

speakers and Wide speakers.

¼

In this case, the Dolby Atmos listening mode cannot be selected.

Zone 2

Change the setting: Press RCV and then HOME on the

remote controller, select "Setup" - "2. Speaker Setup" -

"Speaker Settings" and set "Powered Zone2" to "Yes".



Volume adjustment can be performed only from the unit.

For details, see the next section.

Performing Multi-zone Playback

Press ZONE2 or ZONE3 on the remote controller,

point the remote controller at the unit and press

RECEIVER.

"Z2" or "Z3" lights on the main unit display and the multi-

zone function is enabled. (Zone 2 or Zone 3 is now on.)

Press ZONE2 or ZONE3 on the remote controller

again and press INPUT SELECTOR of the input to be

played in a separate room.

 If you turn the unit to standby during multi-zone

playback, the Z2/Z3 indicators are dimmed and the

playback mode is switched to playback in a separate

room only. Performing steps 1 and 2 while the unit

is in standby also switches the playback mode to

playback in a separate room only. To play the same

source in the main room and separate room, hold



To control on the main unit: Press ZONE2 or ZONE3 and

within 8 seconds, press the input selector button of the input

to be played in a separate room. To play the same source in

the main room and separate room, press ZONE2 or ZONE3

twice.

To turn off the multi-zone function: Press ZONE2 or

ZONE3 on the remote controller and press

RECEIVER.

To control on the main unit, press ZONE2 or ZONE3 and

within 8 seconds, press OFF.

To adjust the volume: Press ZONE2 or ZONE3 on the

remote controller, adjust the volume using VOL

. To do

this on the main unit, press ZONE2 or ZONE3, and adjust

the volume using the MASTER VOLUME control within 8

seconds.

To temporally mute the audio: Press ZONE2 or ZONE3

on the remote controller, press MUTING to mute the audio.

To adjust the sound quality for the separate room

(Zone 2 only): It is necessary to make appropriate settings

to enable this function. Press HOME on the remote

controller and select "Setup" - "7. Hardware Setup" - "Multi

Zone" - "Zone 2 Out", and set its value to "Variable". As for

the operation, press ZONE 2 on the main unit and press

TONE several times to display "Bass", "Treble" or "Balance"

on the main unit display. Display the desired setting on the



Step 3:

Playing Back

 If Zone 2 or Zone 3 is on, power consumption during

standby becomes larger than normal.

 If Zone 2 or Zone 3 is turned on when the listening mode

of the main room is Pure Audio, it will automatically

switch to Direct.

 While Zone 2 or Zone 3 is on, the RI linked system

function (interlink between Onkyo components) is

disabled.

 Pressing INPUT SELECTOR on the remote controller

while you are using the remote controller for Zone 2 or

Zone 3 will switch the controlled target to the main room.

To control Zone 2 or Zone 3 again, press ZONE2 or

ZONE3 several times to select Zone 2 or Zone 3.

WHOLE HOUSE MODE: If you press WHOLE

HOUSE MODE while playback is being performed in

the main room, the WHOLE HOUSE MODE is turned

on, "Z2" and "Z3" on the display light at the same

time and the playback sources of all the rooms are

switched to the same source at once.



WHOLE HOUSE MODE is effective only for playback

of the external player connected to the analog audio

input jacks.

 This function cannot be used if headphones are

connected or audio is output from the speakers of

the TV.

Front Panel

Front flap

ON/STANDBY button: Turns the unit on or into

standby mode.

PURE AUDIO button and indicator: Switches to the

Pure Audio listening mode. The indicator lights when

Pure Audio listening mode is set.

Remote control sensor: Receives signals from the

remote controller.

BLUETOOTH indicator: Flashes while pairing with a

Bluetooth-enabled device is in progress and stays lit

when pairing is completed.

Wi-Fi indicator: Stays lit while the unit is connected to

the wireless LAN router.

Input selector buttons: Switches the input to be

played.

Display

MASTER VOLUME control and indicator: Allows you

to adjust the volume.

HYBRID STANDBY indicator: Lights if the unit enters

standby mode when the HDMI Through, network

standby or Wakeup from Bluetooth function is enabled.

PHONES jack: Stereo headphones with a standard plug

are connected.

ZONE 2 button, ZONE 3 button and OFF button:

Controls the multi-zone function.

TONE and Tone Level buttons: Adjusts the high tone

and low tone.

MONITOR OUT button: Allows you to select the HDMI

jack to output the video input signals that are input to

the unit.

DISPLAY button: Switches the information on the

display.

QUICK SETUP button: Displays the Quick Setup menu.

HOME button: Displays the HOME menu.

Cursor buttons, TUNING

l j

button, PRESET

d c

button and ENTER button: Moves the cursor and

confirms the selection. When listening to AM/FM

broadcasting, tune into the station with TUNING

l j

select the registered station with PRESET

d c

RETURN button: Returns the display to the previous

state.

DIMMER button (North American models): Switches

the brightness of the display.

RT/PTY/TP button (European, Australian and Asian

models): Can be used when receiving the station

transmitting text information.

GH JLK N P V WI MOQR S T U

21 36 8745 F9

MEMORY button: Registers or deletes a station.

TUNING MODE button: Switches the tuning mode.

USB port: A USB storage device is connected so that

music files stored in it can be played.

Listening mode buttons: Allows you to select the

listening mode.

AUX INPUT HDMI/MHL jacks: An HD video camera or

MHL-enabled mobile device is connected. It is possible

to send video and audio of an MHL-enabled mobile

device.

AUX INPUT AUDIO/VIDEO jacks: A video camera or

such other device is connected.

WHOLE HOUSE MODE button: Controls the WHOLE

HOUSE MODE function to play the same source in all

the multi-zone connected rooms.

SETUP MIC jack: The supplied speaker setup

microphone is connected.

14 62 3 75

Display

Stays lit or flashes in the following conditions.

"Z2" (

): Zone 2 is on.

"Z3" (

): Zone 3 is on.

¼

Both "Z2" and "Z3" light when the WHOLE HOUSE MODE function is

on.

"HDMI": HDMI signals are input and the HDMI input

selector is selected.

"ARC" (Audio Return Channel): Audio signals are input

from the ARC compatible TV and the TV/CD input

selector is selected.

"3D": Input signals are 3D.

"USB": "USB" input is selected and USB storage device

is connected.

 It will flash if the USB storage device is not

correctly connected.

"NET": "NET" input is selected and the unit is connected

to the network.

 It will flash if the connection to the network is not

correct.

"DIGITAL": Digital signals are input and the digital input

selector is selected.

Cursor indicators: NET or USB is controlled.

Stays lit while headphones are connected.

Stays lit while NET or USB is controlled.

Stays lit according to the type of input digital signals and

the listening mode.

Stays lit while Music Optimizer is enabled.

Stays lit or flashes in the following conditions.

"AUTO": Tuning mode is auto.

TUNED

": Receiving AM/FM radio.



flashes while tuning is automatically performed.

"FM STEREO": Receiving FM stereo.

"RDS" (European, Australian and Asian models):

Receiving RDS broadcasting.

"MUTING": Flashes when audio is temporarily muted by

pressing MUTING on the remote controller

Stays lit in the following conditions.

"SLEEP": Sleep timer has been set.

"ASb" (Auto Standby): Auto Standby is on.

"ch": Channel is being set.

"Hz": Crossover frequencies are being set.

"m/ft": Speaker distances are being set.

"dB": Speaker volume is being set.

Displays various information of the input signals.

Pressing DISPLAY displays the type of input digital

signals and the listening mode.

Rear Panel

RI REMOTE CONTROL jack: An Onkyo product with RI

jack can be connected and synchronized with this unit.

: The supplied

antennas are connected.

COMPONENT VIDEO IN/OUT jacks: Component video

input/output jacks.

ETHERNET port: Used for LAN connection.

RS232 port: Connected to the home control system. (

)

IR jack: Connected to the multiroom remote control kit.

(

)

12V TRIGGER OUT ZONE 2 jack: Allows you to

connect a device with trigger input jack in a separate

room to enable power link operation between the device

and the unit. (

)

¼

Special devices or cable connections are necessary to use

the functions

. Contact the specialized stores for more

information.

HDMI IN/OUT jacks: Digital video signals and audio

signals are transmitted between the unit and the

connected devices.

Wireless antenna: Used for Wi-Fi connection or when

using a Bluetooth-enabled device. Adjust their angles

according to the connection status.

90°

180°

90°

180°

AC INLET: The power cord is connected.

DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio

signals are input.

GND terminal: The ground wire of the turntable is

connected.

COMPOSITE VIDEO/AUDIO IN jacks: Analog video

signals and audio signals are input.

MONITOR OUT V jack: Video signals are output to the

connected monitor or TV via a composite video cable.

PRE OUT jacks: A power amplifier or subwoofer with

built-in amplifier is connected.

PRE/LINE OUT ZONE2/ZONE3 jacks: Audio output

jacks connected to the pre-main amplifier for multi-zone

playback in a separate room.

SPEAKERS terminals: Speakers are connected. To

use the Multi-zone function, connect the speakers in the

separate room to the ZONE2 speaker terminals.

14567

89 F

IJH L MK

La pagina sta caricando ...

ONKYO TX-NR838 Manuale del proprietario

Marca: ONKYO

Modello: TX-NR838

Categoria: Ricevitori AV

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: ONKYO TX-NR838 Owner's manual

ONKYO TX-NR838 Manuale del proprietario

ONKYO TX-NR838 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti