Moog IRM7C2N Istruzioni per l'uso

La pagina sta caricando ...

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. This installation should be made by a qualied service person and should conform

to all local codes.

b. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

.

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800-554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

MADEIN

BUY AMERICA COMPLIANT • COUNTRY OF ORIGIN U.S.A.

USA

La pagina sta caricando ...

RM7C2N

RM7C2

(

OUTDOOR ONLY

)

24 VAC

1.8 Amps

54 Watts

Total Power: 54 Watts

Accessories: Heater: 25 Watts/Blower: 1 Watt

Camera Power: 28 Watts

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

Note: IRM7CN includes no accessories

24 VAC

1.8 amperios

54 vatios

Energía Total: 54 vatios

Accesorios: Calentador: 25 Watts/Blower: 1 vatio

Energía De la Cámara fotográfica: 28 vatios

Las Herramientas Requirieron: Destornillador Principal Plano Del 100"

Destornillador Principal Phillips

Nota: IRM7CN no incluye ningún accesorio

24 VCA

1.8 ampères

54 watts

Puissance Totale : 54 watts

Accessoires : Réchauffeur : 25 Watts/Blower : 1 watt

Puissance D'Appareil-photo : 28 watts

Les Outils besoin : Tournevis Principal Plat De 100"

Tournevis Principal Phillips

Note : IRM7CN n'inclut aucun accessoire

24 VAC

1.8 Ampere

54 Watt

Gesamtenergie: 54 Watt

Zusatzgeräte: Heizung: 25 Watts/Blower: 1 Watt

Kamera-Energie: 28 Watt

Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher

Kreuzkopfhauptschraubenzieher

Anmerkung: IRM7CN schließt keine Zusatzgeräte mit ein

24 VAC

1.8 ampères

54 watts

Poder Total: 54 watts

Acessórios: Calefator: 25 Watts/Blower: 1 watt

Poder Da Câmera: 28 watt

As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"

Chave de fenda Principal Phillips

Nota: IRM7CN não inclui nenhum acessório

24 VAC

1.8 ampère

54 watt

Alimentazione Totale: 54 watt

Accessori: Riscaldatore: 25 Watts/Blower: 1 watt

Alimentazione Della Macchina fotografica: 28 watt

Attrezzi Richiesti: Cacciavite Capo Piano Del 100"

Cacciavite Capo "phillips"

Nota: IRM7CN non include accessori

Electrical Specifications

IRM7C2N (INDOOR ONLY)

Power 24VAC

Class 2 Only

24 VAC

No power options provided.

Power required for camera only.

24 VAC

Ningunas opciones de la energía proporcionaron.

Energía requerida para la cámara fotográfica solamente.

24 VCA

Option de puissance n'a pas fourni.

Puissance requise pour l'appareil-photo seulement.

24 VAC

Keine Energie Wahlen stellten zur Verfügung.

Energie erfordert für nur Kamera.

24 VAC

Nenhumas opções do poder fornecidas.

Poder requerido para a câmera somente.

24 VAC

Nessun'opzione di alimentazione ha fornito.

Alimentazione richiesta per la macchina fotografica soltanto.

!!

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

11

Using the provided template, mark the

ceiling tile for the cutout.

• Con la plantilla proporcionada, cortar el azulejo del

techo para el agujero.

• En utilisant le calibre fourni, marquez la tuile de

plafond pour le coupe-circuit.

• Mit der zur Verfügung gestellten Schablone

kennzeichnen Sie die Decke Fliese für den Ausschnitt.

• Usando o molde fornecido, marque a telha do teto

para o entalhe.

• Usando la mascherina fornita, contrassegni le

mattonelle del soffitto per il ritaglio.

10.375”

2

A box cutter or jigsaw can be used for

cutting the circle.

• Un cortador o un rompecabezas de la caja se

puede utilizar para cortar el círculo.

• Un coupeur ou une scie sauteuse de boîte peut

être utilisé pour couper le cercle.

• Ein Kastenscherblock oder -tischlerbandsäge

können für den Schnitt des Kreises benutzt werden.

• Um cortador ou um jigsaw da caixa podem ser

usados cortando o círculo.

• Una taglierina o un jigsaw della scatola può essere

utilizzato per il taglio del cerchio.

3

Add spacers to the plate in order to appropri-

ately position the camera, see specific camera.

• Agregue los espaciadores a la placa para colocar apropiada-

mente la cámara fotográfica, vea la cámara fotográfica

específica.

• Ajoutez les entretoises au plat afin de placer convenablement

l'appareil-photo, voyez l'appareil-photo spécifique.

• Fügen Sie Distanzscheiben der Platte hinzu, um die Kamera

passend in Position zu bringen, sehen Sie spezifische Kamera.

• Adicione espaçadores à placa a fim posicionar apropriada-

mente a câmera, veja a câmera específica.

• Aggiunga i distanziatori alla piastra per posizionare giusta-

mente la macchina fotografica, veda la macchina fotografica

specifica.

4

Place the housing in the tile and secure the

outer tabs.

• Coloque la cubierta en el azulejo y asegure las

lengüetas externas.

• Placez le logement dans la tuile et fixez les étiquettes

externes.

• Legen Sie das Gehäuse in die Fliese und sichern Sie

die äußeren Vorsprünge.

• Coloque a carcaça na telha e fixe as abas exteriores.

• Disponga l'alloggiamento nelle mattonelle ed assicuri

le linguette esterne.

6

Add the safety wire to the flex conduit or

continue to the next step.

• Agregue el alambre de seguridad al conducto de la

flexión o continúe al paso siguiente.

• Ajoutez le fil de sûreté au conduit de câble ou

continuez à la prochaine étape.

• Fügen Sie die Sicherheit Leitung dem Flexrohr hinzu

oder fahren Sie zum folgenden Schritt fort.

• Adicione o fio de segurança à canalização do cabo

flexível ou continue à etapa seguinte.

• Aggiunga il legare di sicurezza al condotto della

flessione o continui al punto seguente.

7

The alternate location to attach the safety

wire is on the housing secure tab.

• La localización alterna para unir el alambre de seguridad

está en la lengüeta segura de la cubierta.

• L'endroit alternatif pour attacher le fil de sûreté est sur

l'étiquette bloquée de logement.

• Die wechselnde Position, zum der Sicherheit Leitung

anzubringen ist auf dem sicheren Vorsprung des

Gehäuses.

• A posição alterna para unir o fio de segurança está na

aba segura da carcaça.

• La posizione alternata per fissare il legare di sicurezza è

sulla linguetta sicura dell'alloggiamento.

5

Connect the flex conduit to the housing.

• Conecte el conducto de la flexión con la

cubierta.

• Reliez le conduit de câble au logement.

• Schließen Sie das Flexrohr an das Gehäuse an.

• Conecte a canalização do cabo flexível à

carcaça.

• Colleghi il condotto della flessione

all'alloggiamento.

8

Heater/ Blower

Power

28 Watts

26 Watts

Wiring the dome can be completed by

referring to the diagram.

• Atar con alambre la bóveda puede ser terminada

refiriendo al diagrama.

• Le câblage du dôme peut être accompli en se

rapportant au diagramme.

• Das Verdrahten der Haube kann durchgeführt

werden, indem man auf das Diagramm sich bezieht.

• Wiring a abóbada pode ser terminado consultando

ao diagrama.

• Legare la cupola può essere completato riferendosi

allo schema.

MM

2

AWG

,5 ,75 1,0 1,5 2,5 4 6

22 20 18 16 14 12 10

The beam angle may be adjusted on the

bottom of the unit.

• Éstos se recomiendan las distancias máximas para

24VAC con una gota del voltage del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une baisse de volatage de 10%.

• Diese werden maximale Abstände für 24VAC mit einem

das 10% volatage Tropfen empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma gota do volatage de 10%.

• Questi sono suggeriti distanze massime per 24VAC con

una goccia di volatage di 10%.

10

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

Green

Yellow

Orange

Red

Camera

Power

Accessory

Power

Camera = red & orange wires to terminal

Heater/Blower = yellow & green wires to terminal

• Cámara fotográfica = alambres rojos y anaranjados al

terminal Heater/Blower = alambres del amarillo y del verde

al terminal

• Appareil-photo = fils rouges et oranges à la borne

Heater/Blower = fils de jaune et de vert à la borne

• Kamera = rote u. orange Leitungen zum Anschluß

Heater/Blower = Gelb- u. Grünleitungen zum Anschluß

• Câmera = fios vermelhos & alaranjados ao terminal

Heater/Blower = fios do amarelo & do verde ao terminal

• Macchina fotografica = legare rossi & arancioni al terminale

Heater/Blower = legare di verde & di colore giallo al termi-

nale

The beam angle may be adjusted on the

bottom of the unit.

• Enganche el acollador de la bóveda a la cubierta

según lo demostrado.

• Accrochez la lanière du dôme au logement comme

montré.

• Spannen Sie die Abzuglinie von der Haube zum

Gehäuse an, wie gezeigt.

• Enganche o colhedor da abóbada à carcaça

como mostrada.

• Agganci la cordicella dalla cupola all'alloggiamento

come indicato.

12

Hook the lanyard from the dome to the

housing as shown.

The beam angle may be adjusted on the bottom of the unit.

• Instale la cámara fotográfica en la cubierta y termine los usos del

cableado. Vea las especificaciones de la cámara fotográfica.

• Installez l'appareil-photo dans le logement et accomplissez les

applications de câblage. Voir les caractéristiques d'appareil-

photo.

• Bringen Sie die Kamera in das Gehäuse an und führen Sie Verdrah-

tung Anwendungen durch. Sehen Sie Kameraspezifikationen.

• Instale a câmera na carcaça e termine aplicações da fiação.

Veja especificações da câmera.

• Installi la macchina fotografica nell'alloggiamento e completi le

applicazioni dei collegamenti. Veda le specifiche della macchina

fotografica.

11

Install the camera in the housing and complete

wiring applications. See camera specifications.

9

La pagina sta caricando ...

Moog IRM7C2N Istruzioni per l'uso

Moog IRM7C2N Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti