Aquatec Ocean Manuale utente

Tipo
Manuale utente
Aquatec® Ocean / Ocean XL
EN Shower and Toilet Commode
User Manual
DE Dusch- und Toilettenrollstuhl
Gebrauchsanweisung
FR Fauteuil/chaise pour douche/toilettes
Mode d’emploi
IT Carrozzina da doccia e WC
Istruzioni per l‘uso
ES Silla de ducha y WC
Manual de instrucciones
NL Douche- en toiletrolstoel
Gebruiksaanwijzing
PT Cadeira de banho
Manual de instruções
This manual must be given to the user of the product.
Before using the product, read this manual and safe it
for future reference!
©AQUATEC Operations GmbH
Every effort has been made to ensure that the contents of this publication are fully up-to-date at the time of going to print. As
part of its ongoing improvement of products, AQUATEC Operations GmbH reserves the right to modify existing models at any
time. AQUATEC
®
dealers will be notified of any such modifications. Any use of this publication, or of parts thereof, as well as any
reproduction of images, must have the written consent of AQUATEC Operations GmbH.
Contents
english
1 General 4
1.1 General information 4
1.2 Symbols 4
1.3 Warranty 4
1.4 Intended use 4
1.5 Service life 4
2 Safety 5
2.1 Safety information 5
3 Description 5
3.1 Components 5
3.2 Identification label 6
4 Assembly and installation 6
4.1 Safety information 6
4.2 Assembling the shower and toilet commode 6
4.3 Fitting/removing the self-propelling wheels (optional) 10
5 Usage 11
5.1 Safety information 11
5.2 Swiveling the armrests 12
5.3 Swiveling the footrests 12
5.4 Removing/fitting a heel strap 12
5.5 Removing/fitting the seat plate 12
6 Transport 12
6.1 Safety information 12
7 Maintenance 13
7.1 Maintenance and inspection 13
7.2 Cleaning and disinfection 13
7.3 Changing the wheels 14
8 After use 14
8.1 Storage 14
8.2 Re-use 14
8.3 Disposal 14
9 Troubleshooting 15
9.1 Identifying and repairing faults 15
10 Technical data 16
10.1 Dimensions and weight 16
10.2 Materials 16
Shower and Toilet Commode Ocean / Ocean XL General
4
1 General
1.1 General information
This user manual contains information and notes on the proper and
safe use of the shower and toilet commode.
Please read this user manual carefully before using the product.
The position specifications (A, B, C, etc.) in the handling instructions
always refer to the preceding figure.
1.2 Symbols
Symbols in this manual
In this User Manual warnings are indicated by symbols. The warning
symbols are accompanied by a heading that indicates the severity of
the danger.
WARNING
Indicates a hazardous situation that could result in serious
injury or death if it is not avoided.
CAUTION
Indicates a hazardous situation that could result in minor or
slight injury if it is not avoided.
!
IMPORTANT
Indicates a hazardous situation that could result in damage to
property if it is not avoided.
i
Gives useful tips, recommendations and information for effici-
ent, trouble-free use.
This product complies with Directive 93/42/EEC concerning
medical devices. The launch date of this product is stated in
the CE declaration of conformity.
1.3 Warranty
We provide a manufacturer’s warranty for the product in accordance
with our General Terms and Conditions of Business. Guarantee claims
can only be made through the relevant dealer.
Quality
Quality is of the utmost importance for our company; all processes are
based on ISO 9001 and ISO 13485.
The product meets the requirements of DIN EN 12182.
Should you require further information, please contact the relevant
INVACARE®subsidiary in your country (contact addresses are provi-
ded on the back of this user manual).
1.4 Intended use
The shower and toilet commode is designed exclusively as an aid for
showering or bathing, going to the toilet or for transferring patients
while indoors. Do not use for any other purpose.
WARNING Risk of injury
Never use the product as an aid for getting into or out of
a bathtub, for climbing or descending, as a support or for
similar purposes.
Do not use the product outdoors.
As a toilet commode, you can use the product over a standard toilet
or independently with the commode pan (optional).
The shower and toilet commode may only be used as a bathing stool
in a pool, if the pool does not contain salt water and an attendant is
present at all times.
Temperature for use: 10 - 65 °C
1.5 Service life
The expected service life of this product is three years when used in
accordance with safety instructions and intended use, stated in this
manual. The effective service life can vary according to frequency and
intensity of use.
Shower and Toilett Commode Ocean / Ocean XLSafety
5
2 Safety
2.1 Safety information
WARNING Risk of injury
Do not use a faulty product.
In the event of a malfunction, contact a dealer immediately.
Do not make any unauthorized changes or alterations to
the product.
Only use accessories intended for this product.
3 Description
3.1 Components
The following components are included within the scope of delivery of
the AQUATEC®Ocean/ XL:
A
User manual
B
Backrest with backrest cover and armrests
C
Seat frame with seat plate
D
Side parts with wheels (2 x)
E
Footrests with heel strap (2 x)
F
Clips (2 x) for footrest (inserted)
G
Clips (4 x) for seat frame
H
Allen key AF 4
I
Screws (4 x) and washers (4 x)
J
Base stabilization tube with screws (4 x)
and nuts (4 x) - Ocean XL only
K
Stabilization tube with spacers, screws and
nuts
The following parts are included within the scope of delivery of the
self-propelling wheels with parking brake:
Shower and Toilet Commode Ocean / Ocean XL Assembly and installation
6
A
Self-propelling wheels (2 x)
B
Parking brakes (2 x)
C
Hubs (2 x)
Please note the change in dimensions when the self-propelling wheels
are fitted. The details are provided in the technical data.
3.2 Identification label
The identification label also contains important information:
A
B
C
D
E
F
G
A
Conformity mark
B
Product timeframe
C
Serial device number
D
Load capacity
E
Note (use only on flat surfaces)
F
Note (observe accompanying documents)
G
Device designation
i
The identification label is positioned on the inside of theright-
hand side part.
4 Assembly and installation
4.1 Safety information
!
IMPORTANT
Check the parts for transport damage before commissio-
ning and contact the dealer if required.
Ensure during assembly that the parts are positioned cor-
rectly with respect to one another.
4.2 Assembling the shower and toilet commode
This section describes the assembly. Disassembly takes place in the
reverse order.
Fitting the side parts
1. Remove the enclosed clips F from the bag.
2. Place the seat frame on its side.
!
IMPORTANT
Push the side part evenly onto the frame and do not twist.
Secure the side part at the same height, front and rear.
Shower and Toilett Commode Ocean / Ocean XLAssembly and installation
7
3. Push the side part A with the guides for the footrests D forwards
on the seat frame B.
4. Bring the clip mounts E on the front and back of the side part in
line with a hole in the seat frame C.
5. Insert the clips F from the outside into the side part, until both
ends G enclose the seat frame tube B.
!
IMPORTANT
Ensure that the left and the right side parts are set to the
same height.
6. Turn the seat frame and repeat the procedure on the second side
part.
7. Set the seat frame with the fitted side parts on its wheels.
Adjusting the seat height
!
IMPORTANT
The seat height is to be adapted to the user. It is generally
correctly adjusted if the user can sit on the shower and toilet
commode with both feet resting on the floor.
Change the height to the same level on both sides.
Do not adjust the seat height while there is someone sitting
on the shower and toilet commode.
1. Raise the shower and toilet commode slightly on one side by the
seat frame B.
2. Remove both clips F on this side.
3. Pull the seat frame out of the side part A or push it into the side
part to adjust the seat height.
4. Push both clips back in completely.
5. Raise the other side and set to the same height as described.
Fitting the base stabilization tube (Ocean XL only)
1. Fit the base stabilization tube A using the screws
and nuts B supplied between the side parts C.
Shower and Toilet Commode Ocean / Ocean XL Assembly and installation
8
Fitting the backrest
1. Secure all four wheels. To do this, press down on the red foot lever
on the wheels.
!
IMPORTANT
Ensure that the armrests point forward when in the unfol-
ded position.
A
B
2. Insert the backrest D from behind into the seat frame E, until the
collar C abuts the seat frame tube F.
!
IMPORTANT
Firmly tighten the screws using the Allen key supplied.
Check the screws regularly to ensure they are sitting
securely.
3. Position a washer B on each screw A and secure the backrest on
each side.
4. Tighten the screws with a torque of 5 Nm.
Adjusting the backrest cover
The tension of the backrest can be adjusted as desired.
Tightening
1. Pull the belts A of the backrest cover tighter.
Loosening
1. Open the buckles B by squeezing the retaining lugs together
(arrows).
2. Push the belts back a little through the buckle.
3. Close the belt buckles.
4. Retighten the belts gently.
Shower and Toilett Commode Ocean / Ocean XLAssembly and installation
9
Adjusting the height of the armrests
!
IMPORTANT
Adjust the height of the armrests to suit the user.
Change the height of the armrests evenly on both sides.
Set the height of the right and left armrest in the exact same
manner.
1. On the backrest cover, open the buckle of the belt that passes on
the inside of the backrest frame.
2. On the backrest cover, open the buckle of the belt C that runs
above the armrest.
3. Pass this belt on the inside of the backrest frame and reclose.
i
The nuts are inserted loosely in the retaining clamp and can
fall out.
4. Unscrew the screws B of the armrest bracket A using the Allen
key supplied.
5. Remove the securing clamp D with the nuts from the inside of the
backrest frame.
6. Remove the backrest bracket A with the armrest and move it
upwards.
i
The smaller hole serves to fix the retaining clamp.
7. Insert the screws in the armrest bracket and guide them through
the holes in the backrest frame.
8. If required, put the nuts back into the retaining clamp.
9. Place the retaining clamp on the backrest frame so that the fixing on
the retaining clamp projects into the smaller hole.
10. Turn the screws in the nuts and tighten.
11. Pass the belt of the backrest cover that is still open on the outside
of the backrest frame, close and tighten all belts.
!
IMPORTANT
The armrests are lowered using the same procedure.
When converting to the lower position, the belt that lies
beneath the armrest must be opened and passed inside the
backrest frame.
Shower and Toilet Commode Ocean / Ocean XL Assembly and installation
10
Fitting footrests
!
IMPORTANT
The assembly is the same for the right and left footrest.
1. Push the footrest B with the footplate D into the guide H at the
front of the side part I until the groove A engages with the pin of
the clip G. The footrest can no longer be turned to the side.
Adjusting the height of the footrests
1. Pull the footrest B up a little.
2. Pull out the clip G and push it back in in the desired position. If
required, pull out the footrest a little further to do this.
3. Push the footrest downwards until the groove A engages with the
pin of the clip.
4. Set the second footrest to the desired height as described.
Adjusting the inclination of the footplates
!
IMPORTANT
The inclination of the footplates is continuously adjustable.
Set the right and left footrest in the exact same way.
1. Loosen the Allen head screw C on the footplate using a size 4 Allen
key.
2. Turn the footplate D to the desired position.
3. Retighten the Allen head screw.
4.3 Fitting/removing the self-propelling wheels
(optional)
Shower and Toilett Commode Ocean / Ocean XLUsage
11
!
IMPORTANT
When the self-propelling wheels are fitted, the rear wheels
must remain locked.
The assembly is the same for the right and left self-propel-
ling wheel.
The hubs and the parking brakes for the self-propelling
wheels must be fitted by a dealer. Assembly is described in
the assembly instructions „Assembling the hubs and brakes
for Aquatec®Ocean 24“ wheels“.
1. Align all four wheels in the driving direction.
2. Lock all wheels.
3. Push the axle D on the self-propelling wheel inwards.
(The handrims project outwards.)
4. Press and hold the button F on the outside of the axle.
This releases the retaining balls C at the end of the axle.
5. Raise the shower and toilet commode a little.
6. Insert the axle into the hub B and push in the self-propelling wheel
onto the axle until the end stop E.
7. Release the button.
8. Press the retaining balls outward so that they are behind the
hex nut A.
Remove the wheels using the same procedure in the reverse order.
5 Usage
5.1 Safety information
WARNING
Lock the parking brakes in the park position.
Only use the shower and toilet commode on a flat surface
and only indoors.
Observe the specifications on the identification label. Do
not overload the shower and toilet commode.
Always perform a visual inspection of the product for exter-
nal damage before each use.
Do not use a faulty product.
WARNING Risk of slipping and rolling
Ensure before using that the seat surface is securely fixed to
the seat frame.
Lock all four wheels using the red foot levers before sitting
into the commode or standing up from it, as well as in the
parking position. Apply the parking brake when the self-
propelling wheels are fitted (optional).
WARNING Risk of tipping
Swivel the footrests to the side before sitting down or
standing up or fold the footplates up.
Do not stand on the footrests.
CAUTION Risk of pinching
When using the self-propelling wheels (optional), do not
insert your fingers between the spokes or the rotating self-
propelling wheels and the seat frame while moving.
Shower and Toilet Commode Ocean / Ocean XL Transport
12
5.2 Swiveling the armrests
CAUTION Risk of getting fingers caught in the flap
mechanism
Do not grip the joint when folding the armrests up or
down.
Make sure that no parts are caught in the mechanism.
Do not grip between the armrest and the backrests when
folding up.
5.3 Swiveling the footrests
Entry position/exit position:
1. Pull the footrest A in the guide B a little upwards, until the
groove C no longer engages in the pin of the clip D.
2. Swivel the footrest to the side.
Driving position:
CAUTION Risk of accident due to loose footrest
Fix footrests in the driving position.
1. Turn the footrest A inwards.
2. Push the footrest downward, until the groove C engages in the pin
of the clip D.
5.4 Removing/fitting a heel strap
1. Open the Velcro®strip E on the heel strap.
2. Remove the screw F from the underside of the footplate.
3. Remove the heel strap from the flexible plastic pin.
Attach the strap using the same procedure in the reverse order.
!
IMPORTANT
When installing ensure that the Velcro®strip of the heel strap
is facing backwards.
5.5 Removing/fitting the seat plate
Removing:
1. Pull the seat plate upwards on both sides.
Fitting:
CAUTION Risk of getting fingers caught
Do not insert fingers between the seat surface and the seat
frame when pressing down on the seat plate.
1. Place the seat plate on the seat frame with the cutout to the front.
2. Push the seat plate backwards as far as it will go.
3. With your hand flat, press the seat plate down at the sides and then
at the front and back until the seat plate snaps into the seat frame.
6 Transport
6.1 Safety information
i
The product can be dismantled for transport into the parts of
the scope of delivery (Section 3.1 Components).
Disassemble the product, see Section 4 „Assembly and
installation“.
Shower and Toilett Commode Ocean / Ocean XLMaintenance
13
7 Maintenance
7.1 Maintenance and inspection
If the cleaning and safety notices provided are observed, the product
will be maintenance free.
1. Check product regularly for damage and to ensure that it is securely
assembled.
2. In the event of damage and/or likely repairs, contact the dealer
immediately.
The product must be checked by an authorized dealer before every
re-use or after 24 months at the latest (see Manufacturer‘s recommen-
dation for rehab products of the SPECTARIS industrial association).
7.2 Cleaning and disinfection
The product can be cleaned and disinfected using commercially availa-
ble agents.
!
IMPORTANT
In the sensitive area of the bathroom, hygiene is particularly
important.
Keep the product clean at all times and wash it regularly.
1. Disinfect the product by wiping down all generally accessible sur-
faces with disinfectant (after disassembling the product, if possible).
!
IMPORTANT
All cleaning agents and disinfectants used must be effective,
compatible with one another and must protect the materials
they are used to clean. For further information on decon-
tamination in Healthcare Environments, please refer to ‘The
National Institute for Clinical Excellence’ guidelines on Infec-
tion Control www.nice.org.uk/CG002 and your local infection
control policy.
Clean by hand.
Clean without scouring agent.
Cleaning in a domestic environment
!
IMPORTANT Risk of damage
Do not disassemble the brackets for the accessories.
1. Remove any accessories fitted.
2. Pull the footrests out of the guides.
3. Remove the seat plate and the backrest cover.
4. Remove the side parts, see Section 4 „Assembly and installation“.
5. Reinsert the clips in the seat frame immediately so that they are not
misplaced.
6. Wash the individual parts using a cloth or brush and commercially
available cleaning agents and disinfectants.
7. Rinse the parts with warm water.
8. Dry the parts with a cloth.
9. Re-assemble the product,
see Section 4 „Assembly and installation“.
Cleaning in a hospital environment
CAUTION Risk of burning your skin
Allow the product to cool after cleaning in the autoclave.
1. In addition to cleaning as described above, clean the product at
regular intervals at 85 °C for 3 minutes in the autoclave.
Cleaning the backrest cover (optional)
1. Remove the backrest cover.
2. Wash the cover in a washing machine at max. 60 °C
using a mild detergent.
!
IMPORTANT Risk of damage
Washing at high temperatures can cause shrinkage.
Do not dry covers in the tumble dryer.
Shower and Toilet Commode Ocean / Ocean XL After use
14
7.3 Changing the wheels
WARNING Risk of accident due to incorrectly fitted
wheels.
The wheels must be replaced by a specialist dealer.
8 After use
8.1 Storage
!
IMPORTANT Risk of damage
Store the product in a dry area at a temperature of bet-
ween 0 °C and 40 °C, air pressure of 860 - 1060 hPa and
humidity of 30 - 75%.
Do not store the product near heat sources.
Keep the product out of direct sunlight.
8.2 Re-use
The product is suitable for repeated use. The number of times it can
be used depends on how often and in which way the product is used.
Before reuse, clean and disinfect the product thoroughly and check the
safety functions, and reset if necessary.
8.3 Disposal
The disposal and recycling of used devices and packaging must comply
with the applicable legal regulations.
Please refer to the manufacturer for details of the proper
and complete disposal.
Shower and Toilett Commode Ocean / Ocean XLTroubleshooting
15
9 Troubleshooting
9.1 Identifying and repairing faults
i
The following table provides information on malfunctions and
their possible causes.
If you cannot correct the malfunction using the remedies
named, please contact your dealer directly.
Fault Possible cause Remedy
Adjusting the seat height is difficult due to
stiffness
Deposits between the seat frame
and seat part
Disassemble product into the
parts of the scope of delivery
and clean thoroughly.
Wheel is not turning at all or only with
difficulty.
Dirt between the fork and the rim Clean wheels thoroughly.
It is difficult to turn the footrests Deposits in the guides Remove footrests and clean
thoroughly.
Parking brake of the self-propelling wheels
(optional) does not engage
Parking brake incorrectly adjusted Adjust the parking brake
Shower and Toilet Commode Ocean / Ocean XL Technical data
16
10 Technical data
10.1 Dimensions and weight
D
Total width (Ocean)
Total width (Ocean XL)
Total width with self-propelling wheels
560 mm
640 mm
675 mm
E
Depth
Depth with self-propelling wheels
934 mm
1060 mm
G
Depth without footrests 700 mm
H
Depth of footplate 155 mm
F
Height 964 - 1094 mm
I
Height to armrests 680 - 850 mm
J
Height from footrests to seat 255 - 495 mm
A
Seat width 480 mm
B
Seat depth 450 mm
C
Seat height 477 - 600 mm
Min. width between the side parts approx. 381 mm
K
Min. distance between the floor and the
bracket for the commode pan
approx. 408 mm
Weight approx. 15 kg
Load capacity (Ocean) 150 kg
Load capacity (Ocean XL) 180 kg
10.2 Materials
Frame Stainless steel, powder-coated
Seat plate Polypropylene
Backrest
cover
Nylon, PVC coated
Footrests Polypropylene, glass fiber reinforced
Side parts Polypropylene, glass fiber reinforced
Armrests Polypropylene
Wheels Plastics and stainless steel
Inhaltsverzeichnis
deutsch
1 Allgemeines 18
1.1 Allgemeine Informationen 18
1.2 Symbole 18
1.3 Garantie 18
1.4 Bestimmungsgemäße Verwendung 18
1.5 Produktlebensdauer 18
2 Sicherheit 19
2.1 Sicherheitsinformationen 19
3 Beschreibung 19
3.1 Komponenten 19
3.2 Typenschild 20
4 Montage und Installation 20
4.1 Sicherheitsinformationen 20
4.2 Dusch- und Toilettenrollstuhl zusammenbauen 20
4.3 Selbstfahrerräder (Option) aufstecken/abnehmen 24
5 Bedienung 25
5.1 Sicherheitsinformationen 25
5.2 Armlehnen schwenken 26
5.3 Fußstützen schwenken 26
5.4 Fersenband abnehmen/anbauen 26
5.5 Sitzplatte abnehmen/aufstecken 26
6 Transport 26
6.1 Sicherheitsinformationen 26
7 Wartung 27
7.1 Wartung und Inspektion 27
7.2 Reinigung und Desinfektion 27
7.3 Rollen wechseln 28
8 Nach dem Gebrauch 28
8.1 Lagerung 28
8.2 Wiederverwendung 28
8.3 Entsorgung 28
9 Störungen beheben 29
9.1 Störungen erkennen und beheben 29
10 Technische Daten 30
10.1 Abmessungen und Gewicht 30
10.2 Materialien 30
Dusch- und Toilettenrollstuhl Ocean / Ocean XL Allgemeines
18
1 Allgemeines
1.1 Allgemeine Informationen
In dieser Gebrauchsanweisung finden Sie Informationen und Hinweise
darüber, wie Sie den Dusch- und Toilettenrollstuhl sicher und sachge-
recht benutzen.
Lesen Sie diese Gebrauchsanweisung aufmerksam durch, bevor Sie
das Produkt benutzen. Beachten Sie alle Hinweise, insbesondere die
Sicherheitshinweise, und handeln Sie danach.
Die Positionsangaben (A, B, C, ...) in den Handlungsanweisungen
beziehen sich immer auf die vorangestellte Grafik.
1.2 Symbole
Symbole in dieser Gebrauchsanweisung
Warnungen sind in dieser Gebrauchsanweisung mit Symbolen gekenn-
zeichnet. Die Warnsymbole sind neben einer Überschrift abgebildet,
die auf die Gefährlichkeit hinweist.
WARNUNG
Weist auf eine gefährliche Situation hin, die bei Nichtbeach-
tung zu schweren Verletzungen oder zum Tod führen kann.
VORSICHT
Weist auf eine gefährliche Situation hin, die bei Nichtbeach-
tung zu leichten Verletzungen führen kann.
!
WICHTIG
Weist auf eine gefährliche Situation hin, die bei Nichtbeach-
tung zu Sachschäden führen kann.
i
Nützliche Tipps, Empfehlungen und Informationen für eine
effiziente und reibungslose Verwendung.
Dieses Produkt entspricht der Richtlinie 93/42/EWG über
Medizinprodukte. Der Markteinführungszeitpunkt für dieses
Produkt ist in der CE-Konformitätserklärung angegeben.
1.3 Garantie
Wir gewähren für das Produkt eine Herstellergarantie gemäß unseren
Allgemeinen Geschäftsbedingungen. Garantieansprüche können aus-
schließlich über den jeweiligen Fachhändler geltend gemacht werden.
Qualität
Qualität ist für das Unternehmen entscheidend, alle Abläufe sind nach
den Normen ISO 9001 und ISO 13485 ausgerichtet.
Das Produkt entspricht den Anforderungen der Norm DIN EN 12182.
Bitte wenden sie sich für weitere Informationen an die entsprechende
Invacare®-Niederlassung ihres Landes (Kontaktadressen finden sie auf
der Rückseite dieser Gebrauchsanweisung).
1.4 Bestimmungsgemäße Verwendung
Der Dusch- und Toilettenrollstuhl ist ausschließlich als Hilfe beim
Duschen oder Baden, beim Toilettengang oder für den Transfer im
Innenbereich bestimmt. Jede weitere Verwendung ist nicht erlaubt.
WARNUNG Verletzungsgefahr
Das Produkt niemals als Hilfe zum Ein- oder Aussteigen,
zum Auf- oder Absteigen, als Unterlage oder zu ähnlichen
Zwecken benutzen.
Das Produkt nicht im Außenbereich benutzen.
Als Toilettenrollstuhl können Sie das Produkt über einer Standardtoi-
lette oder eigenständig mit Toilettentopf (Option) verwenden.
Als Badestuhl in einem Pool dürfen Sie den Dusch- und Toilettenroll-
stuhl nur einsetzen, wenn der Pool kein Salzwasser enthält und ständig
eine Aufsichtsperson anwesend ist.
Einsatztemperatur: 10 - 65 °C
1.5 Produktlebensdauer
Wenn das Produkt gemäß den Sicherheitsvorschriften bestimmungs-
gemäß verwendet wird, beträgt die zu erwartende Produktlebensdauer
5 Jahre. Die effektive Lebensdauer kann jedoch, abhängig von der
Häufigkeit und Intensität des Gebrauchs, variieren.
Dusch- und Toilettenrollstuhl Ocean / Ocean XLSicherheit
19
2 Sicherheit
2.1 Sicherheitsinformationen
WARNUNG Verletzungsgefahr
Defektes Produkt nicht verwenden.
Bei Funktionsstörungen unverzüglich einen Fachhändler
kontaktieren.
Keine eigenmächtigen Veränderungen oder Umbauten am
Produkt vornehmen.
Nur Zubehör verwenden, das für dieses Produkt bestimmt
ist.
3 Beschreibung
3.1 Komponenten
Im Lieferumfang des AQUATEC®Ocean / Ocean XL sind folgende
Komponenten enthalten:
A
Gebrauchsanweisung
B
Rückenlehne mit Rückenlehnenbezug und Armlehnen
C
Sitzgestell mit Sitzplatte
D
Seitenteile mit Rollen (2 x)
E
Fußstützen mit Fersenband (2 x)
F
Klipps (2 x) für Fußstütze (eingesteckt)
G
Klipps (4 x) für Sitzgestell
H
Innensechskantschlüssel SW 4
I
Schrauben (4 x) und Unterlegscheiben (4 x)
J
Basis-Stabilisierungsrohr mit Schrauben (4 x)
und Muttern (4 x) - nur bei Ocean XL
K
Stabilisierungsrohr mit Zwischenstücken, Schrauben und
Muttern
Im Lieferumfang der Selbstfahrerräder mit Feststellbremse sind
folgende Teile enthalten:
Dusch- und Toilettenrollstuhl Ocean / Ocean XL Montage und Installation
20
A
Selbstfahrerräder (2 x)
B
Feststellbremse (2 x)
C
Nabe (2 x)
Beachten Sie bitte die geänderten Abmessungen bei montierten Selbst-
fahrerrädern. Die Angaben finden Sie in den technischen Daten.
3.2 Typenschild
Dem Typschild können Sie wichtige Informationen entnehmen:
A
B
C
D
E
F
G
A
Konformitätskennzeichen
B
Produktionszeitraum
C
Laufende Gerätenummer
D
Belastbarkeit
E
Hinweis (Benutzung nur auf ebenen Flächen)
F
Hinweis (Begleitpapiere beachten)
G
Gerätebezeichnung
i
Das Typenschild ist auf der Innenseite des rechten Seitenteils
angebracht.
4 Montage und Installation
4.1 Sicherheitsinformationen
!
WICHTIG
Vor der Inbetriebnahme die Teile auf Transportschäden
prüfen und ggf. Fachhändler kontaktieren.
Bei der Montage die richtige Lage der Teile zueinander
beachten.
4.2 Dusch- und Toilettenrollstuhl zusammen-
bauen
In diesem Abschnitt ist der Zusammenbau beschrieben. Das Zerlegen
erfolgt in umgekehrter Reihenfolge.
Seitenteile montieren
1. Die beiliegenden Klipps F dem Beutel entnehmen.
2. Das Sitzgestell auf eine Seite legen.
!
WICHTIG
Das Seitenteil gleichmäßig aufschieben und nicht verkanten.
Das Seitenteil vorne und hinten in gleicher Höhe befestigen.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102

Aquatec Ocean Manuale utente

Tipo
Manuale utente