QNAP TS-832X-8G Manuale utente

TS-451DeU

User Guide

Document Version: 1

06/05/2020

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per QNAP

TS-451DEU-2G o cerca il tuo prodotto tra le migliori offerte di Server

Contents

1. Preface

About This Guide.......................................................................................................................................... 3

Audience.......................................................................................................................................................3

Document Conventions................................................................................................................................ 3

2. Product Overview

About the TS-451DeU.................................................................................................................................. 4

Hardware Specifications............................................................................................................................... 4

Package Contents........................................................................................................................................ 6

Components................................................................................................................................................. 6

Front Panel...............................................................................................................................................6

Rear Panel................................................................................................................................................7

System Board...........................................................................................................................................7

Drive Numbering.......................................................................................................................................8

Installation Requirements............................................................................................................................. 8

Safety Information.........................................................................................................................................8

Setting Up the NAS.......................................................................................................................................9

3. Installation and Configuration

Hardware Installation.................................................................................................................................. 11

Removing the Case Cover......................................................................................................................11

Attaching the Case Cover.......................................................................................................................12

Drive Installation.....................................................................................................................................14

Replacing Memory Modules...................................................................................................................23

Connecting USB Expansion Units..........................................................................................................25

Installing Handles................................................................................................................................... 26

Rail Kits.................................................................................................................................................. 28

QTS Installation.......................................................................................................................................... 28

Installing QTS Using Qfinder Pro........................................................................................................... 28

Installing QTS Using the Cloud Key....................................................................................................... 29

4. Basic Operations

Power Button.............................................................................................................................................. 32

Reset Button............................................................................................................................................... 32

LEDs........................................................................................................................................................... 33

Audio Alert.................................................................................................................................................. 35

5. Troubleshooting

Forcing Qfinder Pro or myQNAPcloud to Locate the NAS......................................................................... 36

Hot-swapping Failed Drives........................................................................................................................36

Recovering Unintentionally Removed Healthy Drives................................................................................ 36

Support and Other Resources.................................................................................................................... 37

6. Glossary

CloudKey.................................................................................................................................................... 38

myQNAPcloud Link.....................................................................................................................................38

myQNAPcloud............................................................................................................................................ 38

myQNAPcloud ID........................................................................................................................................38

Qfinder Pro................................................................................................................................................. 38

QTS.............................................................................................................................................................38

TS-451DeU User Guide

1

7. Notices

Limited Warranty.........................................................................................................................................39

Disclaimer................................................................................................................................................... 39

GNU Public License....................................................................................................................................39

CE Notice....................................................................................................................................................47

FCC Notice................................................................................................................................................. 47

VCCI Notice................................................................................................................................................ 47

BSMI Notice................................................................................................................................................48

SJ/T 11364-2006.........................................................................................................................................48

2

1. Preface

About This Guide

This guide provides information on the QNAP TS-451DeU NAS and step-by-step instructions on installing

the hardware. It also provides instructions on basic operations and troubleshooting information.

Audience

This document is intended for consumers and storage administrators. This guide assumes that the user has

a basic understanding of storage and backup concepts.

Document Conventions

Symbol Description

Notes provide default configuration settings and other supplementary

information.

Important notes provide information on required configuration settings and other

critical information.

Tips provide recommendations or alternative methods of performing tasks or

configuring settings.

Warnings provide information that, when ignored, may result in potential loss,

injury, or even death.

TS-451DeU User Guide

Preface 3

2. Product Overview

This chapter provides basic information about the QNAP TS-451DeU NAS.

About the TS-451DeU

The TS-451DeU is powered by an Intel® Celeron® J4025 dual-core 2.0 GHz processor, AES-NI hardware

encryption engine, and supports up to 8 GB of DDR4 memory. The NAS features two M.2 2280 SATA 6

Gbps SSD slots and provides four hot-swappable SATA 6 Gbps drive bays to support both hard disk drives

and solid-state drives. The TS-451DeU also includes two USB 2.0 ports and two USB 3.2 Gen 1 ports.

Hardware Specifications

Tip

Model specifications are subject to change without prior notice. To see the latest

specifications, go to https://www.qnap.com.

Component TS-451DeU-2G

Processor

CPU Intel® Celeron® J4025

Frequency 2-core/2-thread 2.00 GHz base/2.90 GHz burst

Architecture x86 64-bit

Encryption engine AES-NI

Memory

Pre-installed memory 2GB: 1 x 2 GB SODIMM DDR4

Memory slots 2 x SODIMM DDR4

Important

• Use only QNAP memory modules to maintain

system performance and stability. For NAS devices

with more than one memory slot, use QNAP

modules with identical specifications.

• Using unsupported modules may degrade

performance, cause errors, or prevent the

operating system from starting.

Maximum memory 8 GB RAM: 2 x 4 GB

Flash memory 4 GB (dual-boot OS protection)

Storage

Drive bays 4 x 3.5-inch SATA 6 Gbps

Note

The SATA 6 Gbps drive bays are backward compatible

with SATA 3 Gbps drives.

TS-451DeU User Guide

Product Overview 4

Component TS-451DeU-2G

Drive compatibility 3.5-inch bays:

• 3.5-inch SATA hard disk drives

• 2.5-inch SATA hard disk drives

• 2.5-inch SATA solid-state drives

M.2 SSD slots 2 x SATA 6 Gbps

M.2 SSD form factor 2280

SSD cache acceleration support 3.5-inch drive bays:1 to 4

Hot-swapping Supported

Network

2.5 Gigabit Ethernet ports 2 x 2.5 GbE RJ45

Note

The 2.5 Gigabit Ethernet port provides 3 network

connection speeds: 2.5G, 1G, 100M, and 10M.

External I/O Ports & Expansion Slots

USB ports • 2 x USB 2.0 Type-A

• 2 x USB 3.2 Gen 1 Type-A

Interface

Buttons • Power

• Reset

Dimensions

Form factor 1U Rackmount

Dimensions (H x W x D) 43.3 x 430 x 294.9 mm

(1.74 x 16.92 x 11.61 in)

Net weight 4.15 kg (9.15 lbs)

Rail compatibility RAIL-B02

Note

Rail kits are not included with the NAS and must be

purchased separately. For details, contact an

authorized reseller or go to http://shop.qnap.com.

Others

Power supply unit 100W, 100-240V AC, 50/60 Hz

System battery CR2032 lithium battery (3V, 225 mAh)

Sound level 21.6 dB(A)

Note

The sound level was tested at a bystander position,

which is within one meter of the NAS. The test NAS

operated at low speed with the maximum number of

drives installed.

Fans System: 3 x 40 mm, 12V DC fans

Operating temperature 0˚C to 40˚C (32˚F to 104˚F)

TS-451DeU User Guide

Product Overview 5

Component TS-451DeU-2G

Relative humidity • Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

Security slot Kensington security slot

Package Contents

Item Quantity

TS-451DeU 1

Power cord 1

Ethernet cables 2 x CAT5e cables

Screws for 3.5-inch drives 16

Screws for 2.5-inch drives 12

Heatsinks for M.2 SSDs 2

Handle kit • 2 x handles

• 2 x angle brackets

• 8 x screws

Quick Installation Guide (QIG) 1

Components

Front Panel

No. Component No. Component

1 Drive LEDs 4 USB expansion unit LED

2 M.2 SSD LEDs 5 Status LED

3 LAN LED 6 Power button

TS-451DeU User Guide

Product Overview 6

Rear Panel

No. Component No. Component

1 Reset button 5 Kensington security slot

2 USB 2.0 Type-A ports 6 Power input

3 USB 3.2 Gen 1 Type-A ports 7 System fans

4 2.5 Gigabit Ethernet ports - -

System Board

Note

The image does not include the case cover.

TS-451DeU User Guide

Product Overview 7

No. Component No. Component

1 Memory slot 2 3 M.2 SSD slot 1

2 Memory slot 1 4 M.2 SSD slot 2

Drive Numbering

Installation Requirements

Category Item

Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)

• Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

• Flat, anti-static surface without exposure to direct sunlight, liquids,

or chemicals

Hardware and peripherals • Storage drives

For the list of compatible drive models, go to https://

www.qnap.com/compatibility.

• Network cable

Tools • Phillips #1 or #2 screwdriver

• Anti-static wrist strap

Safety Information

The following instructions help ensure personal safety and environmental safety. Read these instructions

carefully before performing any operations.

TS-451DeU User Guide

Product Overview 8

General Instructions

• The NAS should be stored in a secure location with restricted access, controlled through the use of a

tool, lock and key, or any means of security.

• Only qualified, skilled, and authorized persons with knowledge of all restrictions, safety precautions,

and installation and maintenance procedures should have physical access to the NAS.

• To avoid potential injury or damage to components, ensure that the drives and other internal system

components have cooled before touching them.

• Observe electrostatic discharge (ESD) procedures to avoid potential injury or damage to components.

Power

• To reduce the risk of fire or electric shock, ensure that you only connect the power cord to a properly

grounded electrical outlet.

•

The device may have one or more power supply unit (PSU) cords. To avoid serious injuries, a trained

service technician must disconnect all PSU cords before installing or replacing system components.

System Battery

• To avoid potential battery explosion, causing injury or damage to components, ensure that you replace

the existing battery with a battery of the same type.

• Dispose of used batteries properly according to local regulations or the instructions of the battery

manufacturer.

Moving Parts

•

Moving fan blades: Keep your body parts away from moving fan blades while the device is connected

to a power source.

•

Moving components: Keep your body parts away from other moving components.

Setting Up the NAS

Important

Read all safety requirements and information in Safety Information carefully before setting

up the NAS or installing NAS components.

1. Place your NAS device in an environment that meets the requirements.

For details, see Installation Requirements.

TS-451DeU User Guide

Product Overview 9

2. Install the NAS on a rack.

For details, see Rail Kits and Installing Handles.

3. Install the drives.

For details, see the following topics:

• Installing 3.5-inch Hard Drives on 3.5-inch Trays

• Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays

• Installing M.2 Solid-State Drives

4. Connect the NAS to the network.

5. Optional: Connect expansion units.

For details, see Connecting USB Expansion Units

6. Connect the power cord and all applicable cables.

7. Power on the NAS.

8. Install QTS.

For details, see QTS Installation.

9. Log on to QTS.

TS-451DeU User Guide

Product Overview 10

3. Installation and Configuration

This chapter provides specific hardware and firmware installation and configuration steps.

Hardware Installation

This section provides information on installing drives, memory modules, handles, and adding expansion

units.

Removing the Case Cover

Warning

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

•

Other moving components: Keep your hands and other body parts away from other

moving components.

1. Power off the NAS.

2. Disconnect the power cord from the electrical outlet.

3. Disconnect all cables and external attachments.

4. Remove the case cover.

a. Loosen the screws.

TS-451DeU User Guide

Installation and Configuration 11

b. Slide the cover back.

c. Lift the cover off the NAS.

Attaching the Case Cover

Warning

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

TS-451DeU User Guide

Installation and Configuration 12

•

Other moving components: Keep your hands and other body parts away from other

moving components.

1. Place the cover on the NAS.

2. Slide the cover forward.

3. Tighten the screws.

4. Connect all cables and external attachments.

5. Connect the power cord to the electrical outlet.

TS-451DeU User Guide

Installation and Configuration 13

6. Power on the NAS.

Drive Installation

The TS-451DeU is compatible with 3.5-inch and 2.5-inch hard drives, 2.5-inch solid-state drives, and M.2

solid-state drives.

Installing 3.5-inch Hard Drives on 3.5-inch Trays

For the list of compatible drive models, go to https://www.qnap.com/compatibility.

Warning

• Installing a drive deletes all data on the drive.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

•

Other moving components: Keep your hands and other body parts away from other

moving components.

1. Power off the NAS.

2. Remove the drive tray.

a. Pull the tray handle outward.

b. Pull the tray out.

TS-451DeU User Guide

Installation and Configuration 14

3. Install a drive on the tray.

a. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes

on the bottom of the tray.

b. Attach the screws.

4. Load the tray into the bay.

TS-451DeU User Guide

Installation and Configuration 15

a. Insert the tray into the bay.

b. Slide the tray into the bay.

c. Push the handle.

d. Lock the tray.

5. Power on the NAS.

Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays

For the list of compatible drive models, go to https://www.qnap.com/compatibility.

Warning

• Installing a drive deletes all data on the drive.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

•

Other moving components: Keep your hands and other body parts away from other

moving components.

1. Power off the NAS.

TS-451DeU User Guide

Installation and Configuration 16

2. Remove the drive tray.

a. Pull the tray handle outward.

b. Pull the tray out.

3. Install a drive on the tray.

a. Place the tray on the drive so that the holes on the tray are aligned with those on the drive.

b. Attach the screws.

TS-451DeU User Guide

Installation and Configuration 17

4. Load the tray into the bay.

a. Insert the tray into the bay.

b. Slide the tray into the bay.

c. Push the handle.

d. Lock the tray.

TS-451DeU User Guide

Installation and Configuration 18

5. Power on the NAS.

Installing M.2 Solid-State Drives

The TS-451DeU has two M.2 SATA 6 Gbps SSD slots on the System Board. For a list of compatible M.2

SSDs, go to http://www.qnap.com/compatibility.

Warning

• Installing a drive deletes all data on the drive.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

•

Other moving components: Keep your hands and other body parts away from other

moving components.

Note

• QNAP recommend installing heatsinks on the M.2 SSD controllers to enhance cooling

efficiency and to ensure consistent performance.

• Before installing non-QNAP heatsinks, ensure that they are of the appropriate size and

shape.

TS-451DeU User Guide

Installation and Configuration 19

La pagina sta caricando ...

QNAP TS-832X-8G Manuale utente

Questo manuale è adatto anche per

QNAP TS-832X-8G Manuale utente

in altre lingue

Documenti correlati

Altri documenti