BCM MX67QM Manuale utente

WWW.BCMCOM.COM

User’s Manual

MX67QM

Industrial Mini ITX Motherboard

￭ Preface

ii

Copyright Notice

The material in this document is the intellectual property of BCM Advanced

Research. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are

under continual improvement and we reserve the right to make changes

without notice.

Trademarks

All trademarks are the properties of their respective owners.

￭ BCM

®

is registered trademark of BCM Advanced Research.

￭ NVIDIA

®

is registered trademark of NVIDIA Corporation.

￭ ATI

®

is registered trademark of ATI Technologies, Inc.

￭ AMD

®

is registered trademarks of AMD Corporation.

￭ Intel

®

is registered trademarks of Intel Corporation.

￭ Windows

®

is registered trademarks of Microsoft Corporation.

￭ AMI

®

is registered trademark of Advanced Micro Devices, Inc.

￭ Award

®

is a registered trademark of Phoenix Technologies Ltd.

￭ Realtek

®

is registered trademark of Realtek Semiconductor

Corporation.

Revision History

Revision Revision History Date

V1.1 For PCB v1.x August, 2011

Technical Support

If a problem arises with your system and no solution can be obtained from

the user’s manual, please contact your place of purchase or local distributor.

Alternatively, please try the following help resources for further guidance.

￭ Visit the BCM website for technical guide, BIOS updates, driver

updates, and other information:

http://www.BCM.com/bcm_support_

drivers.htm

◙ Contact our technical staff at:

http://www.bcmcom.com/bcm_

inquiries_techSupport.htm

iii

MX67QM

Safety Instructions

￭ Always read the safety instructions carefully.

￭ Keep this User’s Manual for future reference.

￭ Keep this equipment away from humidity.

￭ Lay this equipment on a reliable at surface before setting it up.

￭ The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭ Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭ Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

￭ Always Unplug the Power Cord before inserting any add-on card or module.

￭ All cautions and warnings on the equipment should be noted.

￭ Never pour any liquid into the opening that could damage or cause

electrical shock.

￭ If any of the following situations arises, get the equipment checked by

service personnel:

◯ The power cord or plug is damaged.

◯ Liquid has penetrated into the equipment.

◯ The equipment has been exposed to moisture.

◯ The equipment does not work well or you can not get it work according

to User’s Manual.

◯ The equipment has dropped and damaged.

◯ The equipment has obvious sign of breakage.

￭ DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60

o

C (140

o

F), IT

MAY DAMAGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling or special disposal.

￭ Preface

iv

CE Conformity

Hereby, BCM Advanced Research declares that this device is

in compliance with the essential safety requirements and other

relevant provisions set out in the European Directive.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruc-

tion manual, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the measures

listed below:

￭ Reorient or relocate the receiving antenna.

￭ Increase the separation between the equipment and receiver.

￭ Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

￭ Consult the dealer or an experienced radio/television technician for help.

NOTICE 1

The changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTICE 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference

that may cause undesired operation.

v

MX67QM

WEEE Statement

ENGLISH

To protect the global environment and as an environmentalist, BCM must

remind you that:

Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment,

Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and

electronic equipment” cannot be discarded as municipal waste anymore and manufactur-

ers of covered electronic equipment will be obligated to take back such products at the end

of their useful life. BCM will comply with the product take back requirements at the end of

life of BCM-branded products that are sold into the EU. You can return these products to

local collection points.

DEUTSCH

Hinweis von BCM zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro-

und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. BCM hat

europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die Eu-

ropäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurück-

zunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich

an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et an de protéger l’environnement, BCM tient à rappeler ceci:

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques

et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits

électriques et électroniques ne peuvent être déposés dans les décharges ou tout simple-

ment mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer

certains produits en n de vie. BCM prendra en compte cette exigence relative au retour

des produits en n de vie au sein de la communauté européenne. Par conséquent vous

pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания BCM предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что:

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005

года, изделия, относящиеся к электрическому и электронному оборудованию, не могут

рассматриваться как бытовой мусор, поэтому производители вышеперечисленного

электронного оборудования обязаны принимать его для переработки по окончании

срока службы. BCM обязуется соблюдать требования по приему продукции,

проданной под маркой BCM на территории EC, в переработку по окончании срока

службы. Вы можете вернуть эти изделия в специализированные пункты приема.

￭ Preface

vi

ESPAÑOL

BCM como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos

electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasi-

cados como “eléctricos y equipos electrónicos” no pueden ser depositados en los con-

tenedores habituales de su municipio, los fabricantes de equipos electrónicos, están

obligados a hacerse cargo de dichos productos al termino de su período de vida. BCM

estará comprometido con los términos de recogida de sus productos vendidos en la

Unión Europea al nal de su periodo de vida. Usted debe depositar estos productos

en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una

empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil BCM u eraan herinneren dat:

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kun-

nen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten

worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.

BCM zal overeenkomstig de richtlijn handelen voor de producten die de merknaam BCM

dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op

lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj

sredini, BCM mora da vas podesti da:

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Di-

rektiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju

pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i

proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog

uobičajenog veka trajanja. BCM će poštovati zahtev o preuzimanju ovakvih proizvoda

kojima je istekao vek trajanja, koji imaju BCM oznaku i koji su prodati u EU. Ove proiz-

vode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako rma dbająca o ekologię, BCM przy-

pomina, że:

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektry-

cznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia

2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być trak-

towane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani

do odbierania ich w momencie gdy produkt jest wycofywany z użycia. BCM wypełni

wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wy-

cofywane z użycia. Produkty BCM będzie można zwracać w wyznaczonych punktach

zbiorczych.

vii

MX67QM

TÜRKÇE

Çevreci özelliğiyle bilinen BCM dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kara-

rnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve

elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların

üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü

olacaktır. Avrupa Birliği’ne satılan BCM markalı ürünlerin kullanım süreleri bittiğinde

BCM ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel to-

plama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost BCM upozorňuje:

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost BCM splní požadavky na odebírání výrobků značky BCM,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve

az BCM emlékezteti Önt, hogy:

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektron-

ikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és

elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen

elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére

azok hasznos élettartama végén. Az BCM betartja a termékvisszavétellel kapcsolatos

követelményeket az BCM márkanév alatt az EU-n belül értékesített termékek esetében,

azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, BCM, da sempre amica della natura, ti ricorda che:

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici

ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti

alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come

riuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla

ne del suo ciclo di vita. BCM si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati

BCM che sono stati venduti all’interno dell’Unione Europea alla ne del loro ciclo di vita.

È possibile portare i prodotti nel più vicino punto di raccolta

￭ Preface

viii

CONTENTS

Copyright Notice .................................................................................ii

Trademarks

.........................................................................................ii

Revision History

..................................................................................ii

Safety Instructions

............................................................................. iii

CE Conformity

....................................................................................iv

FCC-B Radio Frequency Interference Statement

..............................iv

WEEE Statement

................................................................................v

Chapter 1 Overview

�� 1-1

Mainboard Specications

................................................................ 1-2

Mainboard Layout

........................................................................... 1-4

Chapter 2 Hardware Setup

�� 2-1

Quick Components Guide

............................................................... 2-2

CPU

................................................................................................ 2-3

Memory

........................................................................................... 2-4

Power Supply

.................................................................................. 2-5

Back Panel I/O

................................................................................ 2-6

Connector

....................................................................................... 2-9

Jumper

.......................................................................................... 2-16

Slot

................................................................................................ 2-18

Chapter 3 BIOS Setup

�� 3-1

Entering Setup

................................................................................ 3-2

The Menu Bar

................................................................................. 3-4

Main

................................................................................................ 3-5

Advanced

........................................................................................ 3-7

Boot

............................................................................................... 3-15

Security

......................................................................................... 3-16

Chipset

.......................................................................................... 3-22

Power

............................................................................................ 3-24

Save & Exit

................................................................................... 3-26

Chapter 1

Overview

The MX67QM is an Intel® QM67 Mini ITX Motherboard which

supports the 2nd generation Intel® Core™ i7, i5, i3 Mobile

processors providing advanced computing and graphics

performance for gaming, POS, digital signage and server

market segment

Based on the innovative Intel

®

Cougar Point chipset for opti-

mal system efciency, the MX67QM accommodates the Mo-

bile Intel

®

Core i3/ i5/ i7/ Celeron/ Pentium processor in socket

PGA989 and supports up to 2 DDR3 1066/1333/1600 SO-DIMM

slots to provide the maximum of 8GB memory capacity.

In the advanced-level and mid-range market segment, the

MX67QM provides a high-performance solution for today’s

front-end and general purpose workstation, as well as in the

future.

1

￭ Overview

1-2

MX67QM Specications

CPU ■ Mobile Intel Core i3/ i5/ i7/ Celeron/ Pentium proces-

sor (below 45 Watt) in socket PGA989

Chipset

■ North Bridge: integrated with CPU

■ South Bridge: Intel Cougar Point chipset

Memory

■ 2 DDR3 1066/1333/1600 SO-DIMM slots

■ Supports the maximum of 8GB

LAN

■ LAN 1: Intel® 82579LM PHY Gigabit LAN Controller

■ LAN 2: Intel® 82574L PCIe Gigabit LAN Controller

Audio

■ Realtek® ALC887 HD Audio

■ Audio Interface: Line-out, Mic-in, Line-in, 1 x SPDIF

Header, 1 x Front Audio Header, 1 x Amplier

Header

■ 3 Watt/Channel Amplier

Graphics

■ Intel Gen6.0 integrated Graphics Engine

■ Up to QXGA (2048 x 1536) resolution

Expansion

Interface

■ 1 x PCI Express x16

■ 1 x Mini PCI Express

■ 1 x Compact Flash socket by Intel Cougar Point

RAID

■ SATA1~4 support Intel Rapid Storage

Technology

■ (AHCI/ RAID 0/ 1/ 5/ 10) by Intel Cougar Point

■ Supports SSD caching for system acceleration

Back I/O

Panel

■ 1 x PS/2 mouse port

■ 1 x PS/2 keyboard port

■ 1 x VGA port

■ 1 x DVI-D port

■ 1 x COM port

■ 1 x HDMI port

■ 2 x Gigabit LAN jacks

■ 2 x USB 2.0 ports

■ 2 x USB 3.0 ports

■ 1 x Line-In audio jack

■ 1 x Line-Out audio jack

■ 1 x Mic-In audio jack

1-3

MX67QM

Onboard I/O

Headers

■ 2 x USB 2.0 pinheaders (4 ports)

■ 1 x Amplier pinheader

■ 4 x COM port connectors

■ 1 x GPIO pinheader

■ 1 x LVDS connector

■ 1 x Front audio pinheader

■ 1 x Chassis intrusion pinheader

■ 1 x SPDIF pinheader

Form Factor

■ 6.7” (L) x 6.7” (W)

Power Type

■ 20 + 4-pin ATX Power

Mechanical

and

Environment

■ Operating Temperature: -10

o

C to 60

o

C

■ Storage Temperature: -20

o

C to 80

o

C

■ Humidity: 0% ~ 90% RH, Non-Condensing

￭ Overview

1-4

Mainboard Layout

SATA Connector

Chassis Intrusion

Pinheader

LVDS

Connector

PCIe Slot

COM Power

Jumper

Serial Port Connector

COM Power Jumper

Amplier

Pinheader

DIMM Slot

Front Panel

Pinheader

USB

Pin-header

Fan Power

Connector

LVDS Power

Jumper

Mini PCIe Slot

GPIO

Pinheader

LVDS Inverter

Connector

Front Audio

Pinheader

S/PDIF

Pinheader

Power

Connector

AT/ATX

Jumper

Power Connector

Clear CMOS

Jumper

Port 80

Pinheader

Serial Port

DVI-D Port

VGA Port

LAN Jack

USB 2.0

Port

Line-In Jack

Line-Out Jack

Mic-In Jack

LAN Jack

HDMI Port

Mouse Port

Keyboard

Port

USB 3.0

Port

Hardware Setup

This chapter provides you with the information on mainboard hard-

ware congurations. Incorrect setting of jumpers and connectors

may damage your mainboard. Please pay special attention not

to connect these headers in wrong direction. DO NOT adjust any

jumper while the mainboard is powered on.

2

Chapter 2

￭ Hardware Setup

2-2

Quick Components Guide

SATA Connector, p.2-9

Chassis Intrusion

Pinheader, p.2-9

LVDS

Connector,

p.2-5

PCIe Slot,

p.2-18

COM Power

Jumper,

p.2-17

Serial Port Connector, p.2-13

COM Power Jumper,

p.2-17

Amplier

Pinheader,

p.2-10

DIMM Slot, p.2-4

Front Panel

Pinheader,

p.2-11

USB Pin-header,

p.2-12

Fan Power

Connector,

p.2-10

LVDS Power

Jumper,

p.2-17

Mini PCIe Slot, p.2-18

GPIO

Pinheader, p.2-11

LVDS Inverter

Connector, p.2-14

Front Audio Pinheader, p.2-15

S/PDIF

Pinheader,

p.2-15

Power

Connector,

p.2-5

AT/ATX

Jumper,

p.2-17

Power Connector,

p.2-5

Clear CMOS Jumper, p.2-16

Port 80

Pinheader

, p.2-15

Serial Port

DVI-D Port

VGA Port

LAN Jack

USB 2.0

Port

Line-In Jack

Line-Out Jack

Mic-In Jack

LAN Jack

HDMI Port

Mouse Port

Keyboard

Port

USB 3.0

Port

Back I/O, p.2-5

2-3

MX67QM

CPU

▶ Installing the CPU

Important

• On the upper end of the CPU socket is a socket actuator in the form of a

slotted screw head. Make sure that you open or close the socket with a

athead screwdriver before and after installing the CPU.

• When installing the CPU, make sure the cooler set is installed as well

and can work properly to protect the CPU from overheating. For proper

CPU cooler type, please consult the dealer.

1. Turn the socket actuator counterclockwise to open the socket.

2. Place the CPU on top of the socket. Make sure that the gold arrow on

the CPU is aligned with the arrow key on the socket.

3. Push the CPU gently down until its pins securely t into the socket.

4. Turn the socket actuator clockwise to close the socket and secure the

CPU in place.

￭ Hardware Setup

2-4

Memory

▶ Installing Memory Modules

1. Locate the SO-DIMM slot. Align the notch on the DIMM with the key on

the slot and insert the DIMM into the slot.

2. Push the DIMM gently downwards until the slot levers click and lock

the DIMM in place.

3. To uninstall the DIMM, ip the slot levers outwards and the DIMM will

be released instantly.

Important

You can barely see the golden nger if the memory module is properly in-

serted in the DIMM slot.

2-5

MX67QM

Power Supply

ATX Power Connector: ATX1

This connector provides power to the system.

11.+3.3V

1.+3.3V

12.-12V

2.+3.3V

13.Ground

3.Ground

14.PS-ON#

4.+5V

15.Ground

5.Ground

16.Ground

6.+5V

17.Ground

7.Ground

20.+5V

10.+12V

18.-5V

8.PWR OK

19.+5V

9.5VSB

DC Power Connector: JPWR1

This connector provides 12V DC power input.

4.DC Power

2.Ground

3.DC Powe

r

1

.Ground

￭ Hardware Setup

2-6

Back Panel I/O

▶ Mouse/Keyboard Port

The standard PS/2 mouse/keyboard DIN connector is for a PS/2 mouse/

keyboard.

▶ VGA Port

The DB15-pin female connector is provided for monitor.

▶ DVI-D Port

The DVI-D (Digital Visual Interface-Digital) connector allows you to connect

an LCD monitor. It provides a high-speed digital interconnection between

the computer and its display device. To connect an LCD monitor, simply

plug your monitor cable into the DVI connector, and make sure that the other

end of the cable is properly connected to your monitor (refer to your monitor

manual for more information.)

Serial Port

DVI-D Port

VGA Port

LAN Jack

USB 2.0

Port

Line-In Jack

Line-Out Jack

Mic-In Jack

LAN Jack

HDMI Port

Mouse Port

Keyboard

Port

USB 3.0

Port

2-7

MX67QM

▶ RS-232/422/485 Serial Port Connector (Optional)

The serial port is a 16550A high speed communications port that sends/

receives 16 bytes FIFOs. You can attach a serial mouse or other serial

devices directly to the connector.

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

VCC_COM1

Data Carrier Detect

Receive Data

Transmit Data

Data Terminal Ready

Signal Ground

Data Set Ready

Request To Send

Clear To Send

Voltage select setting

by J1

RS-232

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

422 TXD-

422 RXD+

422 TXD+

422 RXD-

GND

NC

Transmit Data, Negative

Receive Data, Positive

Transmit Data, Positive

Receive Data, Negative

Signal Ground

No Connection

RS-422

PIN SIGNAL DESCRIPTION

1

2

3

4

5

6

7

8

9

485 TXD-

NC

485 TXD+

NC

GND

NC

Transmit Data, Negative

No Connection

Transmit Data, Positive

No Connection

Signal Ground

No Connection

RS-485

￭ Hardware Setup

2-8

▶ HDMI Port

The High-Denition Multimedia Interface (HDMI) is an all-digital audio/video

interface capable of transmitting uncompressed streams. HDMI supports

all TV format, including standard, enhanced, or high-denition video, plus

multi-channel digital audio on a single cable.

▶ USB 2.0 Port

The USB 2.0 port is for attaching USB devices such as keyboard, mouse, or

other USB compatible devices. It supports data transfer rate up to 480Mbit/s

(Hi-Speed).

▶ USB 3.0 Port

The USB 3.0 port is backward-compatible with USB 2.0 devices and sup-

ports data transfer rate up to 5 Gbit/s (SuperSpeed).

▶ LAN

The standard RJ-45 LAN jack is for connection to the Local Area Network

(LAN). You can connect a network cable to it.

Speed IndicatorActivity Indicator

Left LED

(Active LED)

Right LED

(100M/1000M Speed LED)

LED Color Yellow Green/Orange

10M Cable

Plug-in

No Transmission Yellow (Lighting) OFF

Transmission Yellow (Blinking) OFF

100M Cable

Plug-in

No Transmission Yellow (Lighting) Green (Lighting)

Transmission Yellow (Blinking) Green (Lighting)

1000M Cable

Plug-in

No Transmission Yellow (Lighting) Orange (Lighting)

Transmission Yellow (Blinking) Orange (Lighting)

In S3/S4/S5 Standby State Yellow (Lighting) OFF

▶ Audio Jack

■ Line-In (Blue) - for external CD player or other audio devices

■ Line-Out (Green) - for speakers or headphones

■ Mic (Pink) - for microphones

La pagina si sta caricando...

BCM MX67QM Manuale utente

BCM MX67QM Manuale utente

in altre lingue

Documenti correlati

Altri documenti