Vivo STAND-V103 Assembly Instructions

Vivo
Marca
Vivo
Modello
STAND-V103
Categoria
Supporti da scrivania a schermo piatto
Tipo
Assembly Instructions
Triple Monitor Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v103
SKU: STAND-V103
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
a (x1)
48mm pipe
b1 (x1)
“C” Clamp
b2 (x1)
“C” Clamp Brace
i (x2)
M10x15
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause damage or serious injury. Do not
use this product for any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use.
c (x1)
Decorative
Cover
d1 (x1)
Monitor Arm
e (x4)
Monitor Arm
Cover
f (x4)
Plastic Pad
g (x2)
M10x47
h (x3)
M6x8
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
j (x2)
M8x10
n (x1)
Spring Washer
k (x1)
M10 Bolt
l (x1)
Support
m (x1)
M10
o (x1)
EVA Pad
s (x2)
Spare Cap
p (x12)
M4x12
q (x12)
M4x30
r (x12)
M4 Spacer
t (x1)
Allen Key Set
w1 (x2)
Nut
u (x1)
Wrench
v1 (x2)
Side VESA
Plate
v2 (x1)
Center
VESA Plate
w2 (x1)
M4x6 Bolt
x (x4)
Wire Clip
d2 (x2)
Monitor Arm
3
ASSEMBLY STEPS
STEP 1
OPTION A: “C” Clamp Installation
Install the C-clamp Brace (b2) to the 48mm Pipe (a) using 3pcs C-clamp Brace
Bolts (h). Install the C-clamp (b1) to the 48mm Pipe (a) assembly according to the
thickness of the desktop. The thickness can be changed in three positions. Connect
it using 2pcs M10x15 Bolts (i), and tighten using the Allen Wrench (t). Tighten the
C-clamp to the desktop using the 2pcs eye bolts. Install the Decorative Cover (c).
TOOLS NEEDED
Phillips
Screwdriver
OPTION B: Existing Grommet Base Installation
If the existing grommet hole comes with a plastic
protector, remove it to ensure a flat surface before
installing the desk mount. Stick the EVA Pad (o) on the
round surface of 48mm Pipe (a). Position the 48mm
Pipe (a) on the mounting surface and secure using
the Support Plate (l), M10 Washer (m), Spring Washer
(n) and M10 Bolt (k). Fasten the M10 Bolt by provided
Wrench (u). Install the Decorative Cover (c).
Drill
22 lbs
Per Arm
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
~
Ü
a
h
b2
í
á
Å
Eye Bolt
c
b1
t
i
ç
~
a
o
Å
~
ä
â
ã
å
a
c
k
n
m
l
4
STEP 1 (Continued)
STEP 2
Place plastic pads (f) on top and bottom of monitor arms (d2), making sure pins
are inserted into holes on arm. Position on ends of monitor arms (d1), secure with
M10x47 bolts (g), then press monitor arm covers (e) in place.
OPTION C: Self-Drilled Grommet Base Installation
Position the 48mm Pipe (a) on the mounting surface and mark the center hole.
Remove the tube support. Drill a 3/8” (10mm) diameter hole at the marked
position through the mounting surface. Stick the EVA Pad (o) on the round surface
of 48mm Pipe (a). Position the 48mm Pipe (a) on the mounting surface and secure
using the Support Plate (l), M10 Washer (m), Spring Washer (n) and M10 Bolt (k).
Fasten the M10 Bolt by provided Wrench (u). Install the Decorative Cover (c).
Å
~
ä
â
ã
å
a
c
k
n
m
l
ç
~
a
o
ÇO
ÇO
ÇN
É
É
Ö
í
Ñ
d2
f
d2
d1
e
e
g
t
5
STEP 3
Install Monitor Arm (d1,d2) to the 48mm Pipe (a), please make sure the wire clips
(x) of Monitor Arm (d1,d2) in the downside. Fasten the M8x10 Bolt (j) by supplier
Allen key (t).
í
~
à
ÇNI ÇO
ñ
a
j
t
d1. d2
x
STEP 4
OPTION A: Flat Back Monitor
Attach side VESA plates (v1) to monitors
using M4x12 screws (p).
OPTION B: Curved Back Monitor
Attach side VESA plates (v1) to monitors
using M4x30 screws (q) and M4 spacers
Attach center VESA plate (v2) to
monitors using M4x12 screws (p).
Attach center VESA plate (v2) to
monitors using M4x30 screws (q) and
M4 spacers (r).
ê
è
î N
r
q
v1
=
é
î N
p
v1
=
é
î O
p
v2
ê
è
î O
r
q
v2
6
STEP 6
Pry o the plastic cover and then use
the Wrench (u) to tighten the nut if the
tilt angle can not be fixed.
t
Fix the tilt angle
u
Fasten the grub screw in monitor arm
to fix the tilting angle by provided
Allen key (t).
grub
screw
Fix the tilt angle
Slide the side monitors onto the head
of Swivel Arm (d1,d2) as shown in the
diagram. Install the security nut (w1).
Make sure the security nut is installed
before you rotate the monitor.
STEP 5
Slide the center monitor onto the head
of Monitor Arm (d1,d2) as shown in the
diagram. Install the M4x6 Bolt (w2).
Make sure the bolt is installed before
you rotate the monitor.
ÇNI ÇO
d1. d2
ÇNI ÇO
d1. d2
ï O
w2
ï N
w1
7
STEP 7
Adjust the Height of Center Monitor:
Turn the bolt counterclockwise to
lower the center monitor, turn the bolt
clockwise to raise the center monitor.
Adjust the Height of Side Monitors:
Remove the nut (w1) and turn the bolt
counter-clockwise with supplied Allen
key (t) to raise the monitor. Install nut
(w1) aer adjustment.
t
STEP 9
Manage the wires.
STEP 8
Pry o the arm cover, then use the Allen key (t) to
adjust the swivel joint tension.
t
t
t
LAST UPDATED: 06/10/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected]
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Vivo STAND-V103 Assembly Instructions

Vivo
Marca
Vivo
Modello
STAND-V103
Categoria
Supporti da scrivania a schermo piatto
Tipo
Assembly Instructions
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti