Pioneer MVH-170UI Manuale utente

English Français Italiano Español Deutsch Nederlands Русский

DIGITAL MEDIA RECEIVER

AUTORADIO NUMÉRIQUE DE MÉDIA

RICEVITORE MULTIMEDIALE DIGITALE

RECEPTOR DIGITAL DE MEDIOS

DIGITALER MEDIA RECEIVER

DIGITAL MEDIA RECEIVER

ЦИФРОВОЙ МУЛЬТИМЕДИЙНЫЙ ПРИЕМНИК

MVH-X370BT

MVH-170UI

MVH-170UBG

MVH-170UB

Operation Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

2En

Before You Start....................................................................................... 3

Getting Started........................................................................................ 3

Radio.......................................................................................................... 5

USB/iPod/AUX.......................................................................................... 6

Bluetooth.................................................................................................. 8

App Mode............................................................................................... 10

Settings ................................................................................................... 11

FUNCTION settings .............................................................................. 11

AUDIO settings...................................................................................... 12

SYSTEM settings ................................................................................... 13

ILLUMINATION settings....................................................................... 13

MIXTRAX settings................................................................................. 13

Connections/Installation..................................................................... 15

Additional Information ........................................................................ 18

Table of Contents

About this manual:

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

English:

Hereby, Pioneer, declares that this MVH-X370BT is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Suomi:

Pioneer vakuuttaa täten että MVH-X370BT tyyppinen

laite on direktiivin 1999/5/EY oleellisten vaatimusten ja

sitä koskevien direktiivin muiden ehtojen mukainen.

Nederlands:

Hierbij verklaart Pioneer dat het toestel MVH-X370BT in

overeenstemming is met de essentiële eisen en de

andere relevante bepalingen van richtlijn 1999/5/EG

Français:

Par la présente Pioneer déclare que l’appareil MVH-

X370BT est conforme aux exigences essentielles et aux

autres dispositions pertinentes de la directive 1999/5/CE

Svenska:

Härmed intygar Pioneer att denna MVH-X370BT står I

överens-stämmelse med de väsentliga egenskapskrav

och övriga relevanta bestämmelser som framgår av

direktiv 1999/5/EG.

Dansk:

Undertegnede Pioneer erklærer herved, at følgende

udstyr MVH-X370BT overholder de væsentlige krav og

øvrige relevante krav i direktiv 1999/5/EF

Deutsch:

Hiermit erklärt Pioneer, dass sich dieses Gerät MVH-

X370BT in Übereinstimmung mit den grundlegenden

Anforde-rungen und den anderen relevanten

Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)

Ελληνικά:

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ΔΗΛΩΝΕΙ ΟΤΙ MVH-X370BT

ΣΥΜ-ΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ

1999/5/ΕΚ

Italiano:

Con la presente Pioneer dichiara che questo MVH-

X370BT è conforme ai requisiti essenziali ed alle altre

disposizioni pertinenti stabilite dalla direttiva 1999/5/

CE.

Español:

Por medio de la presente Pioneer declara que el MVH-

X370BT cumple con los requisitos esenciales y

cualesquiera otras disposiciones aplicables o exigibles

de la Directiva 1999/5/CE

Português:

Pioneer declara que este MVH-X370BT está conforme

com os requisitos essenciais e outras disposições da

Directiva 1999/5/CE.

Čeština:

Pioneer tímto prohlašuje, že tento MVH-X370BT je ve

shodě se základními požadavky a dalšími příslušnými

ustanove-ními směrnice 1999/5/ES

Eesti:

Käesolevaga kinnitab Pioneer seadme MVH-X370BT

vastavust direktiivi 1999/5/EÜ põhinõuetele ja

nimetatud direktiivist tulenevatele teistele

asjakohastele sätetele.

Magyar:

Alulírott, Pioneer nyilatkozom, hogy a MVH-X370BT

megfelel a vo-natkozó alapvetõ követelményeknek és az

1999/5/EC irányelv egyéb elõírásainak.

Latviešu valoda:

Ar šo Pioneer deklarē, ka MVH-X370BT atbilst Direktīvas

1999/5/EK būtiskajām prasībām un citiem ar to

saistītajiem noteikumiem.

Lietuvių kalba:

Šiuo Pioneer deklaruoja, kad šis MVH-X370BT atitinka

esminius reikalavimus ir kitas 1999/5/EB Direktyvos

nuostatas.

Malti:

Hawnhekk, Pioneer jiddikjara li dan MVH-X370BT

jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti

oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC

Slovenčina:

Pioneer týmto vyhlasuje, že MVH-X370BT spĺňa

základné požiadavky a všetky príslušné ustanovenia

Smernice 1999/5/ES.

Slovenščina:

Pioneer izjavlja, da je ta MVH-X370BT v skladu z

bistvenimi zahtevami in ostalimi relevantnimi določili

direktive 1999/5/ES.

Română:

Prin prezenta, Pioneer declara ca acest MVH-X370BT

este in conformitate cu cerintele esentiale si alte

prevederi ale Directivei 1999/5/EU.

български:

С настоящето, Pioneer декларира, че този MVH-

X370BT отго-варя на основните изисквания и други

съответни постановления на Директива 1999/5/EC.

Polski:

Niniejszym Pioneer oświadcza, że MVH-X370BT jest

zgodny z zasadniczymi wymogami oraz pozostałymi

stosownymi postanowieniami Dyrektywy 1999/5/EC

Norsk:

Pioneer erklærer herved at utstyret MVH-X370BT er i

samsvar med de grunnleggende krav og øvrige

relevante krav i direktiv 1999/5/EF.

Íslenska:

Hér með lýsir Pioneer yfir því að MVH-X370BT er í

samræmi við grunnkröfur og aðrar kröfur, sem gerðar

eru í tilskipun 1999/5/EC

Hrvatski:

Ovime tvrtka Pioneer izjavljuje da je ovaj MVH-X370BT u

skladu osnovnim zahtjevima i ostalim odredbama

Direktive 1999/5/EC.

Manufacturer:

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,

Kanagawa 212-0031, JAPAN

EU Representative’s:

Pioneer Europe NV

Haven 1087, Keetberglaan 1,

B-9120 Melsele, Belgium/Belgique

http://www.pioneer.eu

3En

English

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is especially

important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the

manual in a safe and accessible place for future reference.

Private households in the member states of the EU, in Switzerland and Norway may return their used

electronic products free of charge to designated collection facilities or to a retailer (if you purchase a

similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human health.

WARNING

•Do not attempt to install or service this product by yourself. Installation or servicing of this

product by persons without training and experience in electronic equipment and automotive

accessories may be dangerous and could expose you to the risk of electric shock, injury or other

hazards.

•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle

in a safe location before attempting to use the controls on the device.

CAUTION

•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.

Also, damage to this unit, smoke, and overheating could result from contact with liquids.

•Always keep the volume low enough to hear outside sounds.

•The Pioneer CarStereo-Pass is for use only in Germany.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service

Station.

MVH-X370BT/170UI/170UBG/170UB

*1 The button indications vary depending on the unit.

*2 This button is referred to as DISP in this manual.

Frequently used operations

The available buttons vary depending on the unit.

Before You Start

If you want to dispose this product, do not mix it with general household waste. There is a separate

collection system for used electronic products in accordance with legislation that requires proper

treatment, recovery and recycling.

Getting Started

Basic operation

Purpose Operation

Turn on the power* Press SRC/OFF to turn on the power.

Press and hold SRC/OFF to turn off the

power.

Adjust the volume Turn the M.C. dial.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DISP repeatedly.

Return to the previous display/list Press /DIMMER.

Return to the normal display from the

menu.

Press BAND/.

Answering/ending a call (Only for MVH-

X370BT)

Press .

SRC (source)/OFF

Detach button

Display windowM.C. (multi-control)

dial

BAND/

/DIMMER Display button*2

*1

4En

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,

the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the

source off.

Display indication

Detach the front panel to prevent theft. Remove any cables and devices attached to the

front panel and turn off the unit before detaching it.

Important

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the

display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer not to set

at this time, turn the M.C. dial to select [NO], then press to confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

3 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],

then press to confirm.

4 Press the M.C. dial to confirm the settings.

NOTES

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 13) and INITIAL settings

(page 5).

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the automatic answering function is set (page 10).

(Only for Bluetooth-compatible models.)

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 11).

Appears when a traffic program is received.

Appears when traffic announcements are received (page 11).

Appears when the sound retriever function is set (page 12).

Appears when random/shuffle play is set (except when BT AUDIO is

selected as the source).

Appears when repeat play is set (except when BT AUDIO is selected as the

source).

Appears when the iPod control function is set (page 7).

Appears when a Bluetooth connection is made (page 8).

(Only for Bluetooth-compatible models.)

Detaching the front panel

Detach Attach

Setup menu

Menu Item Description

LANGUAGE Select the language to display the text information from a

compressed audio file.

[ENG](English),

[РУС](Russian),

[TUR](Turkish)

CLOCK SET Set the clock.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

5En

English

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

2 Press and hold SRC/OFF to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

NOTE

The options vary depending on the unit.

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

(radio data system) function only works in areas that broadcast RDS signals for FM

stations.

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

3 Press a number button (1/ to 6/).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 12).

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 12).

To store stations manually

1

While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/) until it stops flashing.

Canceling the demonstration display (DEMO OFF)

INITIAL settings

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

SP-P/O MODE Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to the rear

speaker output leads and RCA output. If there is a full-range

speaker connected to the rear speaker output leads, and the

RCA output is not used, you may select either [REAR/SUB.W] or

[REAR/REAR].

S/W UPDATE Select to update the unit to the latest Bluetooth software. For

details on Bluetooth software and updating, visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically. (Some of the settings will be retained

even after resetting the unit, such as Bluetooth pairing

information, etc.)

[YES], [CANCEL]

Radio

Receiving preset stations

Best stations memory (BSM)

6En

The unit searches for a station by PTY (program type) information.

1 Press during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO], [POPULAR],

[CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service name is

displayed.

NOTES

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for

about two seconds and then the tuner returns to the original station.

PTY list

For more details about PTY list, visit the following site:

http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html

NOTE

iPod function is not available for MVH-170UBG/170UB.

Disconnect headphones from the device before connecting it to the unit.

USB device/iPod

1

Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB storage device as any device

connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable

supplied with the device. However, depending on the connected device and the numbers of the files in

the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is

not compatible with WAV and FLAC* file formats, and cannot be used with the MIXTRAX function.

* The FLAC files are only compatible with MVH-170UI/170UBG/170UB.

Using PTY functions

USB/iPod/AUX

Playing back

AUX input jack (3.5 mm stereo jack)

USB port

SRC (source)/OFF

M.C. (multi-control) dial

7En

English

AUX

1

Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source.

You can make various adjustments in the FUNCTION settings (page 11).

Note that the following operations do not work for an AUX device. To operate an AUX

device, use the device itself.

*1 Compressed audio files only

*2 When there is no 3/S.Rtrv button on the unit, the sound retriever function can be set by the

FUNCTION settings.

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode.

2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to

confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the link play

mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

– iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CONTROL iPod/CTRL iPod]: The unit’s iPod function can be operated from the

connected iPod.

[CONTROL AUDIO/CTRL AUDIO]: The unit’s iPod function can only be operated by

the buttons on the unit. In this mode, the connected iPod cannot be turned on or off.

NOTES

• Pressing iPod can also switch the control mode (only for MVH-170UI).

• Switching the control mode to [CONTROL iPod/CTRL iPod] pauses song playback. Use the connected

iPod to resume playback.

Operations

Purpose Operation

Select a folder/album*1 Press 1/ or 2/.

Select a track/song (chapter) Press or .

Fast forward or reverse Press and hold or .

Search for a file from a list 1 Press to display the list.

2 Turn the M.C. dial to select the desired

file (folder) name or category, then press

to confirm.

3 Turn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

View a list of the files in the selected folder/

category*1

Press the M.C. dial when a folder/category

is selected.

Play a song in the selected folder/

category*1

Press and hold the M.C. dial when a folder/

category is selected.

Alphabetical search (iPod only) 1 Press to display the list.

2 Turn the M.C. dial to select the desired

category list, then press to enter the

alphabetical search mode.

(Turning the M.C. dial twice also enters

the alphabetical search mode.)

3 Turn the M.C. dial to select a letter, then

press to display the alphabetical list.

To cancel alphabetical search, press /

DIMMER.

Repeat play Press 6/.

Random/shuffle play Press 5/.

Shuffle all play (iPod only) Press and hold 5/.

Pause/resume playback Press 4/PAUSE.

Sound retriever*2 Press 3/S.Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression rates

Return to root folder (USB only)*1 Press and hold BAND/.

Change drives in USB device

(Devices that support the USB mass storage

device class protocol only)

Press BAND/.

Useful functions for iPod

Purpose Operation

8En

• The following operations are still accessible from the unit, even if the control mode is set to

[CONTROL iPod/CTRL iPod].

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

(Only for MVH-X370BT)

The MIXTRAX function creates a non-stop mix of your music library, accompanied by

illumination effects. For details on MIXTRAX settings, see page 13.

NOTES

• This function is not compatible with an Android device connected via MTP.

• When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is

disabled.

• Depending on the file/song, sound effects may not be available.

• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

1 Press 3/MIX to turn MIXTRAX on/off.

(Only for MVH-X370BT)

Important

If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may

not work properly.

1 Turn on the Bluetooth function of the device.

2 Press and hold to display the connection menu.

3 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the device list.

• To cancel searching, press the M.C. dial.

• If the desired device is not in the list, select [RE-SEARCH].

• If there is no device available, [NOT FOUND] appears in the display.

4 Turn the M.C. dial to select a device from the device list, then press to confirm.

Press and hold the M.C. dial to switch the displayed device information between the

Bluetooth device address and device name.

5 Select [Pioneer BT Unit] shown in the device display.

6 Make sure the same 6-digit number appears on this unit and the device, then

select “Yes” on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the connection menu (page 8).

• Depending on the device, the PIN code is required in step 6. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,

[VISIBLE] in the connection menu needs to be set to [ON]. For details on a Bluetooth device operations,

refer to the operating instructions supplied with the Bluetooth device.

Connection menu

About MIXTRAX (USB/iPod only)

Bluetooth

Bluetooth connection

Menu Item Description

DEVICELIST Display the list of paired Bluetooth devices. “*” appears on the

device name when the Bluetooth connection is established.

DEL DEVICE Delete the device information.

[DELETE YES],

[DELETE NO]

ADD DEVICE Register a new device.

A.CONN Select [ON] to connect to a Bluetooth device automatically.

[ON], [OFF]

VISIBLE Select [ON] so that a Bluetooth device can detect the unit when

the unit is connected via Bluetooth to another device.

[ON], [OFF]

PIN CODE Change the PIN code.

1 Press the M.C. dial to display the setting mode.

2 Turn the M.C. dial to select a number.

3 Press the M.C. dial to move the cursor to the next position.

4 After inputting the PIN code, press and hold the M.C. dial.

After inputting the PIN code, pressing the M.C. dial returns you

to the PIN code input display, and you can change the PIN code.

DEV. INFO Switch the device information on the display between the

device name and Bluetooth device address.

GUEST MODE Select [ON] to move to the [DEL DEVICE] screen automatically

when the unit has already been paired with three devices.

[ON], [OFF]

9En

English

First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two

Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running

can drain the vehicle’s battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

1

Press to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu

will display. To switch to another phone, press again.

2 Turn the M.C. dial to select [MISSED], [DIALLED], [RECEIVED] or [PHONE BOOK],

then press to confirm.

The phone number list appears.

3 Turn the M.C. dial to select a name or phone number, then press to confirm.

The phone call starts.

To answer an incoming call

1

Press when a call is received.

TIP

When two phones are connected to the unit via Bluetooth and there is an incoming call while one

phone is being used for a call, a message will appear in the display. To answer that incoming call, you

need to end the existing call.

Basic operations

To preset phone numbers

1

Select a phone number from a phone book or call history.

2 Press and hold one of the number buttons (1/ to 6/).

The contact is stored in the selected preset number.

To make a call using a preset number, press one of the number buttons (1/ to 6/),

then press the M.C. dial.

Voice recognition (Only for iPhone)

This function is only available when an iPhone equipped with voice recognition is

connected to the unit via Bluetooth.

1 Press and hold the M.C. dial to activate the voice recognition mode.

2 Press the M.C. dial and then talk into the microphone to input voice commands.

To exit the voice recognition mode, press BAND/.

NOTE

For details on the voice recognition features, refer to the manual supplied with your iPhone.

Phone menu

A.PAIRING Select [ON] to pair the unit and iPhone automatically when an

iPhone is connected to the unit via USB. (This function may not

be available depending on the version of iOS you are using.)

[ON], [OFF]

Bluetooth telephone

Purpose Operation

End a call Press .

Reject an incoming call Press and hold when a call is received.

Switch between the current caller

and a caller on hold

Press the M.C. dial.

Menu Item Description

Cancel a caller on hold Press and hold .

Adjust the volume of the caller’s

voice (When private mode is on,

this function is not available.)

Turn the M.C.dial during the call.

Turn the privacy mode on or off Press BAND/ during the call.

Menu Item Description

MISSED Display the missed call history.

DIALLED Display the dialed call history.

RECEIVED Display the received call history.

PHONE BOOK*1 Display the contacts which have been transferred from your

phone. Set [VISIBLE] in the connection menu to [ON] to browse

the contacts via this unit.

Purpose Operation

10En

*1 The contacts on your phone will normally be transferred automatically when the phone is

connected. If they are not, use your phone to transfer the contacts.

*2 If two phones are connected, this function does not work on incoming calls that are received while

one of the phones is being used for a call.

Important

• Depending on the Bluetooth audio player connected to this unit, the available operations will be

limited to the following two levels:

– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.

– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select

song, etc.

• The sound of the Bluetooth audio player will be muted when the phone is in use.

• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone

automatically.

• Depending on the type of Bluetooth audio player you have connected to this unit, operation and

information displayed may vary based on availability and functionality.

1 Make a Bluetooth connection with the Bluetooth audio player.

2 Press SRC/OFF to select [BT AUDIO] as the source.

3 Press BAND/ to start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 11).

* Depending on the connected device, these operations may not be available.

(APP mode is not available for MVH-170UBG/170UB.)

You can enjoy listening to an application on an iPhone/Android device via the unit. In

some cases, you can control an application by using the unit.

For details on compatible devices, visit our website.

Important

Use of third party apps may involve or require the provision of personally identifiable information,

whether through the creation of a user account or otherwise, and for certain applications, the provision

of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT

LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING

THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE

PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT

CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY

APP.

For iPhone users

This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later.

For Android device users

This function is compatible with devices that have Android OS 2.3 or later installed and also support

Bluetooth SPP (Serial Port Profile) and A2DP (Advance Audio Distribution Profile).

NOTE

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION

THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE

SOLE RESPONSIBILITY OF THE APP PROVIDER.

PRESET 1-6 Recall the preset phone numbers. You can also recall the preset

phone numbers by pressing one of the number buttons (1/

to 6/).

PHONE FUNC Select [ON] to answer an incoming call automatically.

A.ANSR:*2

[ON], [OFF]

R.TONE:

[ON], [OFF]

Select [ON] if the ring tone does not come out from the car

speakers. Depending on the connected phone, this function

may not work.

PB INVT Invert the order of names in the phone book (name view).

Bluetooth audio

Purpose Operation

Fast forward or reverse Press and hold or .

Select a track Press or .

Repeat play* Press 6/.

Menu Item Description

Random play* Press 5/.

Pause/resume playback Press 4/PAUSE.

Search for a file from a list 1 Press to display the list.

2 Turn the M.C. dial to select the desired

folder name, then press to confirm.

3 Turn the M.C. dial to select the desired

file, then press to confirm. Playback

starts.

App Mode

Purpose Operation

11En

English

The Bluetooth connection is available for MVH-X370BT.

1 Connect this unit with the mobile device.

• iPhone via USB (page 6)

• Android device via Bluetooth (page 8)

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

4 Turn the M.C. dial to select [APP CONN.SET], then press to confirm.

5 Turn the M.C. dial to select one of the below, then press to confirm.

• Select [WIRED] for iPhone.

• Select [BLUETOOTH] for an Android device.

6 Press SRC/OFF to select [APP].

7 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 11).

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

• FUNCTION settings (page 11)

• AUDIO settings (page 12)

• SYSTEM settings (page 13)

• ILLUMINATION settings (page 13)

• MIXTRAX settings (page 13)

3 Turn the M.C. dial to select the options, then press to confirm.

NOTES

• The Bluetooth-related menu items in the following tables are not available for MVH-170UI/170UBG/

170UB.

• iPod-related menu items in the following tables are not available for MVH-170UBG/170UB.

• APP mode-related menu items in the following tables are not available for MVH-170UBG/170UB.

The menu items vary according to the source.

Playback of an application via the unit

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press BAND/.

Settings

FUNCTION settings

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast

signal conditions of the FM band signal.

(Available only when FM band is selected.)

BSM

Store the six strongest stations on the number

buttons (1/ to 6/ ) automatically.

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

programs when AF (alternative frequencies

search) is selected. (Available only when FM

band is selected.)

LOCAL

FM: [OFF], [LV1], [LV2], [LV3], [LV4]

MW/LW: [OFF], [LV1], [LV2]

Restrict the tuning station according to the

signal strength.

TA

[ON], [OFF] Receive current traffic information if available.

(Available only when FM band is selected.)

AF

[ON], [OFF] Allow the unit to retune to a different frequency

providing the same station. (Available only when

FM band is selected.)

NEWS

[ON], [OFF] Interrupt the currently selected source with

news programs. (Available only when FM band is

selected.)

12En

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*3 Not available when [OFF] is selected in [SUB.W].

SEEK

[MAN], [PCH] Assign / buttons to seek the stations

one by one (manual tuning) or select a station

from the preset channels.

SEL DEVICE

Connect a Bluetooth device in the list.

S.RTRV

[1] (effective for low compression

rates),

[2] (effective for high

compression rates),

[OFF]

Enhance compressed audio and restore rich

sound.

Not available when;

• USB is selected as a source and the MIXTRAX

function is set to on.

• The FLAC file is played back. (Available for

MVH-170UI/170UBG/170UB)

AUDIO BOOK

[FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when

[CONTROL iPod/CTRL iPod] is selected in the

control mode.)

PAUSE

Pause or resume playback.

PLAY

Start playback.

STOP

Stop playback.

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

Menu Item Description

USB

iPod

EQ SETTING

[SUPER BASS], [POWERFUL],

[NATURAL], [VOCAL], [CUSTOM1],

[CUSTOM2], [FLAT]

Select an equalizer band and

level for further customizing.

Equalizer band: [80HZ], [250HZ],

[800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

Select or customize the equalizer curve.

[CUSTOM1] can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

• USB, iPod, and APP (iPhone)

• BT AUDIO, and APP (Android)

[CUSTOM2] is a shared setting used for all

sources.

You can also switch the equalizer by pressing

repeatedly (Only for MVH-170UBG/

170UB).

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

Only frequencies lower than those in the

selected range are output from the subwoofer.

BASS BOOST

[0] to [+6] Select the bass boost level.

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Slope level: [–12], [–24]

Only frequencies higher than the high-pass filter

(HPF) cutoff are output from the speakers.

SLA

[+4] to [–4] Adjust the volume level for each source except

FM.

Each of the below combinations are set to the

same setting automatically.

• USB, iPod, and APP (iPhone)

• BT AUDIO, and APP (Android)

Menu Item Description

13En

English

You can also access to these menus when the unit is turned off.

*1 [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once

the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may

continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory)

position.

*2 Not available when [APP] is selected as the source.

(Only for MVH-X370BT)

SYSTEM settings

Menu Item Description

LANGUAGE

[ENG](English), [РУС](Russian),

[TUR](Turkish)

Select the language to display the text

information from a compressed audio file.

CLOCK SET

Set the clock (page 4).

12H/24H

[12H], [24H] Select the time notation.

AUTO PI

[ON], [OFF] Search for a different station with the same

programming, even if using a preset station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

connected to the unit.

BT AUDIO

[ON], [OFF] Set the Bluetooth signal on/off.

MUTE MODE (Only available for MVH-170UI)

[MUTE], [20dB ATT], [10dB ATT] Mute or attenuate sound automatically when a

signal from equipment with a mute function is

received.

PW SAVE*1

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

allowed when this function is on.

BT MEM CLEAR

[YES], [CANCEL] Clear the Bluetooth device data (device list, PIN

code, call history, phone book, preset phone

numbers) stored in the unit.

[CLEARED] appears when data is successfully

deleted.

BT VERSION

Displays the system version of the unit and the

Bluetooth module.

APP CONN. SET*2

[WIRED], [BLUETOOTH] Select the appropriate connection method

according to your device.

ILLUMINATION settings

Menu Item Description

DIM SETTING

[SYNC CLOCK], [MANUAL] Change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ depending on

[DIM SETTING].

MIXTRAX settings

Menu Item Description

SHORT MODE

[1.0 MIN], [1.5 MIN], [2.0 MIN],

[2.5 MIN], [3.0 MIN], [OFF]

Select the length of the playback time.

MIX PATTERN

[SOUND LEVEL] Change the MIXTRAX special effects according

to the audio level.

The mix pattern changes according to the

sound level.

[LOW PASS] The mix pattern changes according to the bass

level.

[RANDOM] The mix pattern changes randomly according

to the sound level mode and low pass mode.

Menu Item Description

14En

DISP FX

[ON], [OFF] Set the MIXTRAX special effects on/off.

CUT IN FX

[ON], [OFF] Turn the MIXTRAX sound effects on/off while

manually changing the tracks.

Menu Item Description

15En

English

Important

• When installing this unit in a vehicle

without an ACC (accessory) position on

the ignition switch, failure to connect the

red cable to the terminal that detects

operation of the ignition key may result

in battery drain.

• Use of this unit in conditions other than

the following could result in fire or

malfunction.

–Vehicles with a 12-volt battery and

negative grounding.

–Speakers with 50 W (output value) and

4 Ω to 8 Ω (impedance value).

• To prevent a short-circuit, overheating or

malfunction, be sure to follow the

directions below.

–Disconnect the negative terminal of the

battery before installation.

–Secure the wiring with cable clamps or

adhesive tape. Wrap adhesive tape

around wiring that comes into contact

with metal parts to protect the wiring.

– Place all cables away from moving parts,

such as the shift lever and seat rails.

–Place all cables away from hot places,

such as near the heater outlet.

–Do not connect the yellow cable to the

battery by passing it through the hole

to the engine compartment.

–Cover any disconnected cable

connectors with insulating tape.

– Do not shorten any cables.

– Never cut the insulation of the power

cable of this unit in order to share the

power with other devices. The current

capacity of the cable is limited.

– Use a fuse of the rating prescribed.

– Never wire the negative speaker cable

directly to ground.

– Never band together negative cables of

multiple speakers.

• When this unit is on, control signals are

sent through the blue/white cable.

Connect this cable to the system remote

control of an external power amp or the

vehicle’s auto-antenna relay control

terminal (max. 300mA 12 V DC). If the

vehicle is equipped with a glass antenna,

connect it to the antenna booster power

supply terminal.

• Never connect the blue/white cable to

the power terminal of an external power

amp. Also, never connect it to the power

terminal of the auto antenna. Doing so

may result in battery drain or a

malfunction.

• The black cable is ground. Ground cables

for this unit and other equipment

(especially, high-current products such as

power amps) must be wired separately. If

they are not, an accidental detachment

may result in a fire or malfunction.

This unit

Connections/Installation

Connections

ACC position No ACC position

MVH-X370BT/170UI/170UBG/170UB

Microphone 4m (13 ft. 1 in.) (Only for

MVH-X370BT)

Rear output or subwoofer output

Front output (Only for MVH-X370BT/

170UI)

Antenna input

Power cord input

Fuse (10 A)

Wired remote input (Only for MVH-

X370BT/170UI)

Hard-wired remote control adapter can

be connected (sold separately).

Microphone input (Only for MVH-

X370BT)

Power cord

Perform these connections when not

connecting a rear speaker lead to a

subwoofer.

To power cord input

Depending on the kind of vehicle, the

function of and may be different.

In this case, be sure to connect to

and to .

Yel low

Back-up (or accessory)

Yel low

Connect to the constant 12 V supply

terminal.

Red

Accessory (or back-up)

Red

Connect to terminal controlled by the

ignition switch (12 V DC).

Connect leads of the same color to each

other.

Black (chassis ground)

Blue/white

The pin position of the ISO connector

will differ depending on the type of

vehicle. Connect and when Pin 5

is an antenna control type. In another

type of vehicle, never connect and

.

Blue/white

Connect to the system control terminal

of the power amp (max. 300 mA 12 V

DC).

Blue/white

Connect to the auto-antenna relay

control terminal (max. 300 mA 12 V DC).

Yellow/black (Only for MVH-170UI)

If you use equipment with a Mute

function, wire this lead to the Audio

Mute lead on that equipment. If not,

keep the Audio Mute lead free of any

connections.

Speaker leads

White: Front left

White/black: Front left

Gray: Front right

Gray/black: Front right

Green: Rear left or subwoofer

Green/black: Rear left or subwoofer

Violet: Rear right or subwoofer

Violet/black: Rear right or subwoofer

ISO connector

In some vehicles, the ISO connector

may be divided into two. In this case, be

sure to connect to both connectors.

16En

NOTES

• Change the initial menu of this unit. Refer

to [SP-P/O MODE] (page 5). The

subwoofer output of this unit is

monaural.

• When using a subwoofer of 70 W (2 Ω), be

sure to connect the subwoofer to the

violet and violet/black leads of this unit.

Do not connect anything to the green

and green/black leads.

Power amp (sold separately)

Perform these connections when using the

optional amplifier.

System remote control

Power amp (sold separately)

Connect with RCA cables (sold

separately)

To front output*

Front speaker*

To rear output or subwoofer output

Rear speaker or subwoofer

* Only for MVH-X370BT/170UI

Important

• Check all connections and systems before

final installation.

• Do not use unauthorized parts as this

may cause malfunctions.

• Consult your dealer if installation requires

drilling of holes or other modifications to

the vehicle.

• Do not install this unit where:

–it may interfere with operation of the

vehicle.

–it may cause injury to a passenger as a

result of a sudden stop.

• The semiconductor laser will be damaged

if it overheats. Install this unit away from

hot places such as near the heater outlet.

• Optimum performance is

obtained when the unit is

installed at an angle of less

than 60°.

• When installing, to ensure proper heat

dispersal when using this unit, make sure

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

DIN front/rear mount

This unit can be properly installed using

either front-mount or rear-mount

installation.

Use commercially available parts when

installing.

DIN Front-mount

1 Insert the mounting sleeve into the

dashboard.

For installation in shallow spaces, use

the supplied mounting sleeve. If there is

enough space, use the mounting sleeve

that came with the vehicle.

Installation

Leave ample

space

5 cm

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Mounting sleeve

Make sure that the unit is installed

securely in place. An unstable

installation may cause skipping or other

malfunctions.

DIN Rear-mount

1 Line up the holes on the mounting

bracket with the holes on the sides of

the unit to attach the bracket.

2 Screw in one screw on each side to

hold the unit in place.

Tapping screw (5 mm × 8 mm)

Mounting bracket

Dashboard or console

Using the included bracket

You can also use the included bracket to

mount the unit. Check to make sure that

the included bracket matches your

particular model of vehicle and then attach

it to the unit as shown below.

Screw

Bracket

Removing the unit

1 Remove the trim ring.

Trim ring

Notched tab

• Releasing the front panel allows easier

access to the trim ring.

• When reattaching the trim ring, point

the side with the notched tab down.

17En

English

2 Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3 Pull the unit out of the dashboard.

(Only for MVH-X370BT)

The microphone should be placed directly

in front of the driver at a suitable distance

to pick up their voice clearly.

CAUTION

It is extremely dangerous to allow the

microphone lead to become wound

around the steering column or shift lever.

Be sure to install the microphone in such a

way that it will not obstruct driving. It is

recommended to use the clamps (sold

separately) to arrange the lead.

To install on the sun visor

1 Fit the microphone lead into the

groove.

2 Install the microphone clip on the sun

visor.

Lowering the sun visor reduces the

voice recognition rate.

To install on the steering

column

1 Slide the microphone base to detach it

from the microphone clip.

Microphone

Microphone clip

Microphone base

Installing the microphone

Microphone

lead

Groove

Microphone clip

2 Install the microphone on the rear side

of the steering column.

Double-sided tape

18En

The display automatically returns to the

normal display.

→ No operations have been made for

about 30 seconds.

– Perform an operation.

The repeat play range changes

unexpectedly.

→ Depending on the repeat play range,

the selected range may change when

another folder or track is being selected

or during fast forwarding/reversing.

– Select the repeat play range again.

A subfolder is not played back.

→ Subfolders cannot be played when

[FLD] (folder repeat) is selected.

– Select another repeat play range.

The sound is intermittent.

→ You are using a device, such as a cellular

phone, that may cause audible

interference.

– Move electrical devices that may be

causing the interference away from

the unit.

The sound from the Bluetooth audio

source is not played back.

→ There is a call in progress on a

Bluetooth-connected cellular phone.

– The sound will be played back when

the call is terminated.

→ A Bluetooth-connected cellular phone

is currently being operated.

– Stop using the cellular phone.

→ The connection between the unit and

the cellular phone is not established

correctly after a call made by a

Bluetooth-connected cellular phone.

– Make a Bluetooth connection

between the unit and the cellular

phone again.

Common

AMP ERROR

→ This unit fails to operate or the speaker

connection is incorrect.

→ The protective circuit is activated.

– Check the speaker connection.

– Turn the ignition switch OFF and back

to ON again. If the message remains,

contact your dealer or an authorized

Pioneer Service Station for assistance.

NO XXXX (NO TITLE, for example)

→ There is no embedded text information.

– Switch the display or play another

track/file.

USB device/iPod

FORMAT READ

→ Sometimes there is a delay between the

start of playback and when you start to

hear any sound.

– Wait until the message disappears and

you hear sound.

NO AUDIO

→ There are no songs.

–Transfer the audio files to the USB

device and connect.

→ The connected USB device has security

enabled.

– Follow the USB device instructions to

disable the security.

Additional Information

Troubleshooting

Error messages

SKIPPED

→ The connected USB device contains

DRM protected files.

– The protected files are skipped.

PROTECT

→ All the files on the connected USB

device are embedded with DRM.

– Replace the USB device.

N/A USB

→ The connected USB device is not

supported by this unit.

– Disconnect your device and replace it

with a compatible USB device.

CHECK USB

→ The USB connector or USB cable has

short-circuited.

– Check that the USB connector or USB

cable is not caught in something or

damaged.

→ The connected USB device consumes

more than maximum allowable current.

– Disconnect the USB device and do not

use it. Turn the ignition switch OFF

and back to ACC or ON. Connect only

compliant USB devices.

→ The iPod operates correctly but does

not charge.

– Make sure the connection cable for

the iPod has not shorted out (e.g., not

caught in metal objects). After

checking, turn the ignition switch OFF

and back to ON, or disconnect the

iPod and reconnect.

ERROR-19

→ Communication failed.

– Perform one of the following

operations, then return to the USB

source.

• Turn the ignition switch OFF and

back to ON.

• Disconnect the USB device.

• Change to a different source.

→ iPod failure.

– Disconnect the cable from the iPod.

Once the iPod’s main menu is

displayed, reconnect the iPod and

reset it.

ERROR-23

→ USB device was not formatted properly.

– Format the USB device with FAT12,

FAT16 or FAT32.

ERROR-16

→ The iPod firmware version is old.

– Update the iPod version.

→ iPod failure.

– Disconnect the cable from the iPod.

Once the iPod’s main menu is

displayed, reconnect the iPod and

reset it.

STOP

→ There are no songs in the current list.

– Select a list that contains songs.

NOT FOUND

→ No related songs.

– Transfer songs to the iPod.

Bluetooth device

ERROR-10

→ The power failed for the Bluetooth

module of the unit.

– Turn the ignition switch OFF and back

to ACC or ON.

Apps

NO BT DEVICE GO TO BT MENU TO

REGISTER

→ No Bluetooth device found.

– Connect the unit and the device via

Bluetooth (page 8).

CONN. FAILED PRESS BAND KEY TO

RETRY

→ Bluetooth connection failed.

–Press BAND/ to make a connection

again.

19En

English

DISCONNECTED PRESS BAND KEY TO

RETRY

→ Bluetooth connection failed.

– Press BAND/ to make a connection

again.

CHECK APP

→ Connection to the application failed.

– Follow the instructions that appear on

the screen.

START UP APP

→ The application has not started running

yet.

– Operate the mobile device to start up

the application.

USB storage device

• Connections via USB hubs are not

supported.

• Firmly secure the USB storage device

before driving. Do not let the USB storage

device fall onto the floor, where it may

become jammed under the brake or

accelerator pedal.

• Depending on the USB storage device,

the following problems may occur.

–Operations may vary.

–The storage device may not be

recognized.

–Files may not be played back properly.

–The device may cause audible

interference when you are listening to

the radio.

iPod

• Do not leave the iPod in places with high

temperatures.

• Firmly secure the iPod when driving. Do

not let the iPod fall onto the floor, where

it may become jammed under the brake

or accelerator pedal.

• The settings of the iPod such as the

equalizer and repeat play are changed

automatically when the iPod is

connected to the unit. Once the iPod is

disconnected, those settings will return

to the original settings.

• Incompatible text saved on the iPod will

not be displayed by the unit.

• Only the first 32 characters can be

displayed as a file name (including the file

extension) or a folder name.

• The unit may not work properly

depending on the application used to

encode WMA files.

• There may be a slight delay at the start of

the playback of audio files embedded

with image data, or audio files stored on a

USB device with numerous folder

hierarchies.

• Russian text to be displayed on this unit

should be encoded in one of the

following character sets:

–Unicode (UTF-8, UTF-16)

– A character set other than Unicode that

is used in a Windows environment and

is set to Russian in the multi-language

setting

CAUTION

• Pioneer cannot guarantee compatibility

with all USB mass storage devices, and

assumes no responsibility for any loss of

data on media players, smartphones, or

other devices while using this product.

• Do not leave discs or a USB storage

device in any place that is subject to high

temperatures.

WMA files

Handling guidelines

Compressed audio

compatibility

File extension .wma

MP3 files

WAV files

• WAV file formats cannot be connected via

MTP.

FLAC files (Only for MVH-170UI/

170UBG/170UB)

• FLAC file formats cannot be connected

via MTP.

• FLAC files may not be playable,

depending on the encoder.

USB device

• There may be a slight delay when starting

playback of audio files on a USB storage

device with numerous folder hierarchies.

This unit supports only the following iPod

models. Supported iPod software versions are

shown below. Older versions may not be

supported.

Made for

–iPod touch (1st through 5th generation)

–iPodclassic

–iPod with video

–iPod nano (1st through 7th generation)

–iPhone5s

–iPhone5c

–iPhone5

–iPhone4S

–iPhone4

–iPhone3GS

–iPhone3G

–iPhone

• Operations may vary depending on the

generation and/or software version of

the iPod.

Bit rate 48 kbps to 320 kbps

(CBR), 48 kbps to 384

kbps (VBR)

Sampling frequency 32 kHz, 44.1 kHz, 48

kHz

Windows Media™

Audio Professional,

Lossless, Voice/DRM

Stream/Stream with

video

Not compatible

File extension .mp3

Bit rate 8 kbps to 320 kbps

(CBR), VBR

Sampling frequency 8 kHz to 48 kHz (32

kHz, 44.1 kHz, 48 kHz

for emphasis)

Compatible ID3 tag

version

1.0, 1.1, 2.2, 2.3, 2.4

(ID3 tag Version 2.x is

given priority over

Version 1.x.)

M3u playlist Not compatible

MP3i (MP3

interactive), mp3 PRO

Not compatible

File extension .wav

Quantization bits 8 and 16 (LPCM), 4

(MSADPCM)

Sampling frequency 16 kHz to 48 kHz

(LPCM), 22.05 kHz and

44.1 kHz (MS ADPCM)

File extension .flac

Sampling frequency 8/11.025/12/16/22.05/

24/32/44.1/48 [kHz]

Quantization bit rate 16 bit

Channel mode 1/2 ch

Playable folder

hierarchy

Up to eight tiers (A

practical hierarchy is

less than two tiers.)

Playable folders Up to 500

Playable files Up to 15 000

Playback of copyright-

protected files

Not compatible

Partitioned USB

device

Only the first partition

can be played.

iPod compatibility

20En

• Users of iPod with the Lightning

Connector should use the Lightning to

USB Cable (supplied with iPod).

• Users of iPod with the Dock Connector

should use the CD-IU51. For details,

consult your dealer.

• Refer to the iPod manuals for information

about the file/format compatibility.

• Audiobook, Podcast: Compatible

CAUTION

Pioneer accepts no responsibility for data

lost on the iPod, even if that data is lost

while this unit is used.

The user cannot assign folder numbers and

specify playback sequences with this unit.

Sequence of audio file depends on the

connected device.

Note that the hidden files in a USB device

cannot be played back.

Example of a hierarchy

Bluetooth

The Bluetooth® word mark and logos are

registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by PIONEER

CORPORATION is under license. Other

trademarks and trade names are those of their

respective owners.

iTunes

Apple and iTunes are trademarks of Apple

Inc., registered in the U.S. and other

countries.

WMA

Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or

other countries.

Sequence of audio files

Folder

Compressed audio

file

to : Playback sequence

01 to 05: Folder number

Russian character chart

Copyright and trademark

D: Display C: Character

This product includes technology owned

by Microsoft Corporation and cannot be

used or distributed without a license from

Microsoft Licensing, Inc.

FLAC

Foundation

Redistribution and use in source and

binary forms, with or without modification,

are permitted provided that the following

conditions are met:

– Redistributions of source code must

retain the above copyright notice, this list

of conditions and the following

disclaimer.

– Redistributions in binary form must

reproduce the above copyright notice,

this list of conditions and the following

disclaimer in the documentation and/or

other materials provided with the

distribution.

– Neither the name of the Xiph.org

Foundation nor the names of its

contributors may be used to endorse or

promote products derived from this

software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE

COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE

FOUNDATION OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

iPod & iPhone

iPhone, iPod, iPod classic, iPod nano, and

iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Lightning is a trademark of Apple Inc.

“Made for iPod” and “Made for iPhone”

mean that an electronic accessory has

been designed to connect specifically to

iPod or iPhone, respectively, and has been

certified by the developer to meet Apple

performance standards. Apple is not

responsible for the operation of this device

or its compliance with safety and

regulatory standards. Please note that the

use of this accessory with iPod or iPhone

may affect wireless performance.

Android™

Android is a trademark of Google Inc.

MIXTRAX

MIXTRAX is a trademark of the PIONEER

CORPORATION.

La pagina si sta caricando...

Pioneer MVH-170UI Manuale utente

Pioneer MVH-170UI Manuale utente

in altre lingue

Documenti correlati

Altri documenti