Psion Teklogix Netbook Pro none Guida Rapida

NETBOOK PRO

Quick Start Guide

April 4, 2005 P/N 8100010.D

ISO 9001 Certified

Quality Management

System

Return-To-Factory Warranty

Psion Teklogix provides a return-to-factory warranty on this product

for a period of twelve (12) months in accordance with the Statement

of Limited Warranty and Limitation of Liability provided at the fol-

lowing website: www.psionteklogix.com/warranty.

Note: If you are not already a member of Teknet and you attempt

to view this warranty, you will be asked to register. As a

member of Teknet, you'll have access to helpful information

about your Psion Teklogix products at no charge to you.

In some regions, this warranty may exceed this period - please con-

tact your local Psion Teklogix office for details. For a list of offices,

refer to “Worldwide Offices” on page A-2 of this guide. For a copy

of the NETBOOK PRO User Manual, log on to our Teknet website.

Important: For North American Customers Only

To ensure prompt warranty service in North America, please register

the serial number of this device to activate its warranty coverage by

contacting Psion Teklogix at 1-800-835-5644 ext.209, or via web-

link americascontracts@teklogix.com. Failure to do so could affect

Psion Teklogix' ability to effectively service, repair, or support this

device.

Service

When requesting service, please provide information concerning the

nature of the failure and the manner in which the equipment was

used when the failure occurred. Type, model, and serial number

should also be provided. Before returning any products to Psion Tek-

logix, please call the Customer Services Group for a Return Authori-

zation number.

Support Services

Psion Teklogix provides a complete range of product support ser-

vices to its customers. For detailed information, please refer to

“Product Support Services” on page 14.

Disclaimer

Every effort has been made to make this material complete, accurate,

and up-to-date. Psion Teklogix Inc. reserves the right to make

changes without notice and shall not be responsible for any damages,

including but not limited to consequential damages, caused by reli-

ance on the material presented, including but not limited to typo-

graphical errors.

This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced

or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Further-

more, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion

Teklogix Inc.

All trademarks are the property of their respective holders.

Psion Teklogix NETBOOK PRO Quick Start Guide 1

Table Of Contents

Approvals And Safety Summary . . . . . . . . . . . . . . . . . 2

1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Unpacking The Box: Item Checklist . . . . . . . . 3

2.2 Main Features. . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4.1 Windows® CE .NET . . . . . . . . . . . . . . . 4

2.4.2 About ActiveSync . . . . . . . . . . . . . . . . . 4

2.5 Identifying Product Features . . . . . . . . . . . . . . 5

2.6 Installing The Main Battery . . . . . . . . . . . . . . . 6

2.7 Installing Backup Batteries. . . . . . . . . . . . . . . . 7

2.8 Turning The NETBOOK PRO On And Off. . . 7

2.9 First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.10 Power Management . . . . . . . . . . . . . . . . . . . . 8

2.10.1 Battery Calibration . . . . . . . . . . . . . . . . 8

2.10.2 Charging The Battery Pack . . . . . . . . . 9

2.10.3 How Do I Check The Battery Power? . 9

2.11 Using The Stylus . . . . . . . . . . . . . . . . . . . . . . 9

2.12 Multimedia And Secure Digital Cards . . . . . . 10

2.13 Compact Flash Cards . . . . . . . . . . . . . . . . . . . 10

2.14 PC Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.15 Caring For The NETBOOK PRO. . . . . . . . . . 11

2.15.1 Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.15.2 Battery Care . . . . . . . . . . . . . . . . . . . . . 11

2.15.3 Operating And Storage Temperatures . 13

2.16 How To Reset The NETBOOK PRO . . . . . . . 13

3. Product Support Services . . . . . . . . . . . . . . . . . . . . . 14

3.1 Technical Support . . . . . . . . . . . . . . . . . . . . . . 14

3.2 Product Repairs . . . . . . . . . . . . . . . . . . . . . . . . 14

Appendix A

A.1 Technical Support . . . . . . . . . . . . . . . . . . . . . A-1

A.2 Product Repairs. . . . . . . . . . . . . . . . . . . . . . . A-1

A.3 Worldwide Offices . . . . . . . . . . . . . . . . . . . . A-2

2 Psion Teklogix NETBOOK PRO Quick Start Guide

Approvals And Safety Summary

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic safety precautions should

always be followed to reduce the risk of fire, electric shock

and injury to persons, including the following:

1. Do not use this product near water, for example,

near a bath tub, wash bowl, kitchen sink or laundry

tub, in a wet basement or near a swimming pool.

2. Avoid connecting to a telephone network during an

electrical storm. There may be a remote risk of

electric shock from lightning.

3. Do not use this product to report a gas leak in the

vicinity of the leak.

Important: Save these instructions.

FCC Information For The USA

Radio And Television Interference

This equipment radiates radio frequency energy and if not

used properly—that is, in strict accordance with the instruc-

tions in this manual—may cause interference to radio com-

munications and television reception. It has been tested and

found to comply with the limits for a Class B digital device

pursuant to part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation distance between the equip-

ment and the receiver.

• If you are using the equipment with a mains adaptor,

plug it into an outlet which is on a different circuit

from that to which the receiver is connected.

• Consult an experienced radio/TV technician for help.

For customers in the USA, the following booklet prepared by

the Federal Communications Commission may be of help:

“How to Identify and Resolve Radio-TV Interference Prob-

lems”. This booklet is available from the US Government

Printing Office, Washington, DC 20402 - Stock No 004-000-

00345-4.

Radio Frequency Emissions

Some equipment in hospitals and aircraft is not shielded from

radio frequency emissions. Do not use the NETBOOK PRO on

board aircraft, or in hospitals, without first obtaining permission.

Important Safety Instructions

This equipment was tested for FCC compliance under condi-

tions that included the use of shielded cables and connectors

Psion Teklogix NETBOOK PRO Quick Start Guide 3

between it and the peripherals. It is important that you use

shielded cable and connectors to reduce the possibility of

causing radio and television interference. Shielded cables,

suitable for the NETBOOK PRO, can be obtained from an

authorised Psion Teklogix dealer.

If the user modifies the equipment or its peripherals in any

way, and these modifications are not approved by Psion Tek-

logix, the FCC may withdraw the user’s right to operate the

equipment.

Infrared Device Safety

Class 1 LED Product

This product includes an Infrared device for transmitting and

receiving files from devices supporting the IrDA format.

Although this invisible beam is not considered harmful, and

complies with EN60825-1 (IEC825-1), we recommend the fol-

lowing precautions when the Infrared device is transmitting:

• Do not stare into the Infrared beam.

• Do not view directly with optical instruments.

No parts in the device may be serviced by the user.

Caution

Use only 26 AWG or larger telecommunication line cords. Con-

tact your authorized Psion Teklogix dealer for a suitable cord.

Battery Safety Precautions

Please refer to “Battery Care” on page 11.

1. Introduction

This guide provides information on the operation and fea-

tures of the Psion Teklogix NETBOOK PRO. For additional

information, refer to the NETBOOK PRO User Manual, the

online help, or the documentation supplied with the applica-

tion you are using.

2. Getting Started

2.1 Unpacking The Box: Item Checklist

Your NETBOOK PRO was shipped with a number of acces-

sories. Please ensure that you have all of the following items

and that they are in good condition. For missing items or dam-

aged contents please contact your local Psion Teklogix office.

• NETBOOK PRO (a stylus ships in the holder in the

computer - see “Using The Stylus” on page 9).

• Rechargeable 12.6 V 2200 mAH Lithium-Ion battery

(main battery).

• Two AAA replaceable alkaline batteries (for back-up).

• NETBOOK PRO USB or RS-232 ActiveSync cable.

• ‘Mini to full-size USB host port’ adaptor cable.

•Power Supply.

• NETBOOK PRO AC adaptor.

Other information:

• NETBOOK PRO Quick Start Guide.

• NETBOOK PRO CD (includes User Manual).

4 Psion Teklogix NETBOOK PRO Quick Start Guide

2.2 Main Features

The NETBOOK PRO is a Windows

®

CE .NET OS-based

mobile touchscreen computer with an SVGA touch-sensitive

screen. It has the following features:

•Intel

®

PXA 255 XScale

®

processor (400Mhz).

• Windows CE .NET.

• 32MB Flash and 128MB SDRAM.

• High quality 800 x 600 SVGA TFT transmissive LCD.

• USB master connectivity.

• RS232 serial connector.

• IrDA interface.

•CF Card slot.

• MMC/SDCard/SDIO slot.

• PCMCIA Card slot.

2.3 Applications

The NETBOOK PRO is capable of running a wide variety of

applications. A number of standard applications exist and

custom programs can be installed easily.

The following standard programs are available:

• Wordpad, a word processor for writing letters and

other documents.

• Inbox, for sending and receiving e-mail.

• Internet Explorer, for browsing the World Wide Web.

• Windows Messenger for CE instant-messaging program.

• Pocket On-Schedule, a personal-information manager.

•Microsoft

®

File Viewer, software for viewing files.

• JEM-CE, Java ‘virtual machine’ software.

• Windows Explorer, a file browser.

• Windows Media Player, software for viewing multi-

media files.

2.4 Software

2.4.1 Windows

®

CE .NET

Windows CE .NET is an operating system with ease of appli-

cation integration, comprehensive application development

tools and a growing set of connected capabilities. Windows

CE .NET supports advanced networking protocols and native

support for Bluetooth, improved browser functionality, simpli-

fied WLAN configuration, and a shortened response time

specifically designed to reduce latency in industrial devices.

2.4.2 About ActiveSync

The Microsoft PC connectivity software, ActiveSync, can be

used to connect the NETBOOK PRO to PCs running Win-

dows 95/98/ME/2000/XP or NT 4.0. By connecting the

NETBOOK PRO to a PC with a cable and running Active-

Sync on the PC, you can:

• View your NETBOOK PRO files from Windows

Explorer by using the Mobile Device icon in the PC’s

My Computer window.

• Drag and drop files between the NETBOOK PRO

and the PC in the same way that you would between

PC drives, and they will be automatically converted to

the appropriate file format at the same time.

Psion Teklogix NETBOOK PRO Quick Start Guide 5

• Synchronize e-mail and your address book on the

NETBOOK PRO with the PC to keep them in step

with each other.

• Back up your NETBOOK PRO files to the PC, then

restore them from the PC to the NETBOOK PRO

again, if needed.

For detailed information, please refer to the documentation

supplied with Microsoft Active Sync or the NETBOOK PRO

User Manual.

2.5 Identifying Product Features

Figure 2.1 NETBOOK PRO Open

Figure 2.2 Lower Front Of NETBOOK PRO

Figure 2.3 Right Side Of NETBOOK PRO

MMC/SDCard/SDIO Slot

Power Indicator

Latch

Power Connector

Stylus Release Button

PCMCIA Slot

PCMCIA Release Button

Headphone Jack

Stylus

6 Psion Teklogix NETBOOK PRO Quick Start Guide

Figure 2.4 Rear Of NETBOOK PRO

Figure 2.5 Left Side Of NETBOOK PRO

2.6 Installing The Main Battery

Fitting The Battery

Before you can use the NETBOOK PRO you must fit the bat-

tery. Slide it into place until it clicks, as shown in Figure 2.6.

Important: The NETBOOK PRO will warn you when its

main battery is getting low. The backup

battery is designed to maintain the memory for

several hours.

Changing Battery Packs

If you are using your NETBOOK PRO away from the

charger and a spare battery pack is available, you can change

batteries when the battery warning is displayed. To do this:

1. Switch the NETBOOK PRO off.

2. Slide the battery pack latch towards the rear of the

NETBOOK PRO.

3. Pull the battery away from the NETBOOK PRO to

remove it.

4. Push in the replacement battery pack.

Figure 2.6 Installing The Battery Pack

Important: Always switch off the NETBOOK PRO before

removing the main battery.

Infrared Port

RS232

USB-

Main Battery Cover

CF Card Slot

CF Eject Button

USB-RS232 Connector

USB Connector

Psion Teklogix NETBOOK PRO Quick Start Guide 7

2.7 Installing Backup Batteries

Internal Backup Battery

The NETBOOK PRO has a replaceable backup battery

designed to retain data while the main battery pack is charg-

ing or changed over. The backup battery is a pair of AAA

cells accessible from the front of the open NETBOOK PRO.

Important: If both the main battery pack and the backup

battery are allowed to fully discharge, all user

data held in RAM will be lost.

The backup battery is user-replaceable. To replace it:

1. Switch the NETBOOK PRO off.

2. Position the display at a slight angle forward to access

the backup-battery cover, which is located on the left

above the computer keyboard (see Figure 2.7).

3. Apply downward pressure to the center of the

backup-battery cover and slide it towards the front

of the NETBOOK PRO.

4. Remove the AAA cells.

5. Insert replacement alkaline AAA cells, observing

the polarity indication.

6. To close the compartment, slide the cover back

over the batteries while again applying downward

pressure to the center of the cover.

Figure 2.7 Backup Battery Removal

2.8 Turning The NETBOOK PRO On And Off

To sw itch on:

open the NETBOOK PRO (by default it turns on when

the cover is opened).

The following options to power on are available through the

Advanced menu at Start/Settings/Control Panel/Power Proper-

ties, and can be enabled in any combination:

• When the case is opened.

• When the screen is tapped.

• When the serial cable is connected.

Backup-Battery Cover

Angle display slightly

forward to access cover

8 Psion Teklogix NETBOOK PRO Quick Start Guide

The computer will turn on if the Esc/On key is pressed,

regardless of the options enabled.

To s wi tch off :

press and hold the Fn key, then press the Esc/On key. Or,

tap the Suspend icon in the Start menu. You can switch

off at any time, but first save any open files.

Note: If you do not use the NETBOOK PRO, it will automati-

cally switch off after a few minutes to save battery

power. To continue using the NETBOOK PRO where

you left off, switch the NETBOOK PRO on again using

the Esc/On key. Power saving options are available

via the Control Panel/Power Properties/Power

Schemes menu. The automatic switch-off time may

have different settings, depending on whether the NET-

BOOK PRO is connected to an external electrical sup-

ply.

The NETBOOK PRO can be configured to turn off when the

case is closed. This is the default setting. See the Advanced

menu in Control Panel/Power Properties to disable the fea-

ture.

2.9 First Steps

When you first switch on the NETBOOK PRO, you will see

the Windows CE .NET desktop. At this time it is a good idea

to set the date and time. To do this, go to Start/Settings/Con-

trol Panel/ Date/Time Properties. The Date/Time Properties

dialogue box appears.

1. Set the Time Zone and click on Apply before

changing any other settings.

2. Set the desired date and time values.

3. Click the OK button in Time/Date Properties

menu to close and save your changes.

2.10 Power Management

The NETBOOK PRO is powered by a lithium-ion rechargea-

ble battery pack. The NETBOOK PRO will warn you when

the main battery charge is low.

Note: How long your batteries last will depend upon how

you use your NETBOOK PRO. The NETBOOK PRO

will use considerably more battery power when you

have the brightness turned up, are using files stored

on a memory card, or are using infrared or a

communications card.

You can take steps to help prolong your battery’s life:

• Turn the screen brightness down.

• Set automatic switch-off in the Power menu.

• Use files on the internal storage instead of a

memory card, as the NETBOOK PRO requires

more power to write to the memory card.

The NETBOOK PRO can be powered from AC when con-

nected to the AC adaptor. When the NETBOOK PRO is

powered from AC, it will also charge the battery pack.

2.10.1 Battery Calibration

In order to provide an accurate estimate of the remaining

battery capacity, the NETBOOK PRO must see a full charge/

discharge or discharge/charge cycle in order to learn the char-

acteristics of the battery and calibrate the battery gauge.

Psion Teklogix NETBOOK PRO Quick Start Guide 9

Until this is done, the battery information control panel will

indicate ‘Not calibrated’, and the reported capacity will not

be very accurate.

Psion Teklogix recommends that the battery be fully charged

when the unit is first received, then fully discharged before

being charged again, thus calibrating the battery gauge.

Please refer to the NETBOOK PRO User Manual for more

information.

2.10.2 Charging The Battery Pack

To charge the battery, attach the battery pack to the NET-

BOOK PRO and connect the supplied AC adaptor. The

standard (2200 mAH) NETBOOK PRO battery will nor-

mally be fully charged within 3 to 4 hours.

2.10.3 How Do I Check The Battery Power?

To check the battery power:

1. Press the Start button. The Start menu appears.

2. Select Settings, Control Panel.

3. Select the Power icon from the Control Panel. The

Battery tab gives a brief description of the state of

the main battery.

Note: When your NETBOOK PRO is switched off, it is on

“Suspend” and will continue to use a small amount of

battery power. If you are going to leave your NET-

BOOK PRO switched off for a long period of time,

you are advised to back up your data beforehand

because the batteries will eventually run out.

2.11 Using The Stylus

The stylus is located in a recess in the right side of the com-

puter. To remove it, push the square button next to the stylus

and the stylus will pop out. To store it, push the stylus back

into the recess (see Figure 2.8).

Figure 2.8 Stylus Location And Removal

Tap lightly on the screen using the stylus. You can use your

fingers to tap on the screen, though it is best to use the stylus

to avoid fingerprints or smudges on the screen. Do not tap the

screen with any object that has a sharp tip or you may dam-

age the screen. Don’t use any type of ink pen, as the ink may

be impossible to remove. See “Caring For The NETBOOK

PRO” on page 11 for instructions on how to clean the screen.

You can usually tap on (“click on”) an item with the stylus to

select or change it. For example, you can:

• Double-tap (or click) a program icon, to open a program.

•Press the Alt key, then tap, to right-click.

Note: If the screen doesn’t respond to your taps, you may

need to recalibrate it. See recalibration instructions in

the Control Panel/Stylus Properties /Calibration menu.

Stylus Release Button

Stylus

10 Psion Teklogix NETBOOK PRO Quick Start Guide

2.12 Multimedia And Secure Digital Cards

Multimedia cards (MMCs) and Secure Digital cards (SDs),

which fit into a dedicated slot in the NETBOOK PRO, can be

non-volatile memory cards (used to store application soft-

ware and/or data). They can also be communications or inter-

face cards.

The MMC slot is located on the front of the NETBOOK PRO.

Inserting And Removing An MMC Or SD Card

• Push the card into the card slot until it clicks.

• To remove a card, push the card inwards. It ‘bounces’

and pops outwards, and can then be pulled out.

Store your MMC or SD card safely.

Figure 2.9 MMC/SD Slot Location

2.13 Compact Flash Cards

Compact Flash (CF) cards, which fit into a dedicated slot in

the NETBOOK PRO, can be non-volatile memory cards

(used to store application software and/or data). They can

also be communications or interface cards.

The CF slot is located on the left side of the NETBOOK PRO.

Inserting And Removing A CF Card

• Push the card into the card slot.

• To remove a card, press the eject button next to the

slot. The eject button will pop out, then press the but-

ton again to eject the card.

Store your CF card safely.

Figure 2.10 CF Card Slot Location

MMC/SD Slot

RS232USB-

Eject Button

CF Slot

Psion Teklogix NETBOOK PRO Quick Start Guide 11

2.14 PC Cards

PC Cards, which fit into a dedicated slot in the NETBOOK

PRO, can be non-volatile memory cards (used to store appli-

cation software and/or data). PC Cards can also be communi-

cations or interface cards.

The PC Card slot is located on the right side of the

NETBOOK PRO.

Inserting And Removing A PC Card

• Push the card into the card slot. The eject button next

to the card slot will pop out. The eject button may be

folded into the computer while the card is in the slot.

• To remove a card, press the eject button (unfold first if

it’s tucked away). The card will pop loose, and may be

pulled outwards.

Store your PC Card safely.

Figure 2.11 PC Card Slot Location

2.15 Caring For The NETBOOK PRO

2.15.1 Screen

When used with the approved stylus, the NETBOOK PRO

screen is very resistant to wear and impact and should last for

a considerable time. Use of any object, other than the

approved stylus, may result in damage to the NETBOOK

PRO screen.

To maintain the life of the NETBOOK PRO screen, keep the

screen clean. To clean the screen: switch off the NETBOOK

PRO and use a soft, clean, dry cloth to gently wipe the screen.

(If the NETBOOK PRO is set to turn on automatically when

the screen is tapped, you should turn this preference off

before cleaning the screen.)

Warning: Under no circumstances use chemical solvents

to clean the screen.

2.15.2 Battery Care

CAUTION!

Danger of explosion if a NETBOOK PRO battery is incor-

rectly handled, charged, disposed of or replaced. Replace

only with the same or equivalent type recommended by Psion

Teklogix. Dispose of used batteries according to the instruc-

tions described in “Lithium-Ion Battery Safety Precautions”

on page 12. Carefully review all battery safety issues listed in

that section.

To avoid the risk of fire, do not replace the backup batteries

with rechargeable types.

PC Card Slot

Eject Button

12 Psion Teklogix NETBOOK PRO Quick Start Guide

Lithium-Ion Battery Safety Precautions

Do not store batteries at temperatures in excess of +60°C; the

optimum storage temperature for maximum battery life is

+10°C to +35°C.

Important: It is critical that this safety information be

reviewed and that all warnings be strictly

followed.

Warnings:

TO PREVENT the battery from leaking acid, generating

heat or exploding, adhere to the following precautions.

• Use only with the authorized Psion Teklogix power adaptor.

• To reduce the risk of fire, do not replace the backup bat-

teries with rechargeable batteries.

• Do not dispose of in fire.

• Do not incinerate or subject battery cells to temperatures

in excess of 100°C (212°F). Such treatment can vaporize

the liquid electrolyte causing cell rupture. Incineration

may result in harmful emissions or explosion.

• Do not charge, use or store batteries below -30º C (-22°

F). Batteries must be handled in accordance with all

applicable state and federal laws and regulations.

• The battery incorporates built-in safety devices. To ensure

their proper function, do not disassemble or alter any parts

of the battery.

• Do not short-circuit the battery by directly connecting any

of the exposed terminals with metal objects such as wire.

Do not transport or store the battery together with metal

objects such as necklaces, hair pins, etc.

• Do not use or leave the battery near a heat source such as

a fire or heater.

• Do not immerse the battery in water.

• When charging, use the battery charger specifically

designed for the battery.

• Do not crush, puncture, open, dismantle, or otherwise

mechanically interfere with batteries.

• Do not directly solder the battery.

• Do not connect the battery to an electrical outlet, vehicle

cigarette lighter, etc.

• Do not put battery into a microwave oven or pressurized

container.

• Do not use rechargeable batteries in combination with

non-rechargeable batteries (such as dry-cell batteries) or

batteries of different capacities or brands.

• Immediately remove the battery from the device or battery

charger and stop use if the battery gives off an odour,

generates heat, becomes discoloured or deformed, or in

any way appears abnormal during use.

• Do not continue charging the battery if it does not

recharge within the specified charge time.

• The battery may burst or ignite if the battery leaks.

Always ensure that it is away from any exposed flames.

• If a battery should leak, do not allow the contents to come

into contact with your skin or your eyes. If it does, wash

immediately with plenty of cold water and seek medical

advice.

• Do not store the battery in extremely high temperatures

(e.g., a vehicle, strong direct sunlight, etc.). This may

cause the battery to overheat or ignite, and it may also

reduce the performance and service life of the battery.

• Do not use in areas where static electricity is greater than

what the manufacturer guarantees.

• Keep batteries out of reach of children.

Psion Teklogix NETBOOK PRO Quick Start Guide 13

2.15.3 Operating And Storage Temperatures

Operating:

0°C to +50°C (32°F to 120°F). The power adaptor must

be used in the temperature range: 0°C to +40°C (+32°F

to +104°F).

Storage:

-10°C to +60°C (14°F to 140°F). To prolong the life of

the NETBOOK PRO (and the battery pack) store

between +10°C and +35°C (+50°F and +95°F).

Important: Avoid exposing the NETBOOK PRO to

extreme changes in temperature and humidity,

since such exposure may result in damage.

Charging the NETBOOK PRO battery should

be limited to the temperature range: 0°C to

+40°C (32°F to 104°F).

2.16 How To Reset The NETBOOK PRO

Periodically your NETBOOK PRO may need to be reset if

the following occurs:

• You cannot exit a program normally.

• The operating system stops responding.

• You are unable to power on using the Power button.

NETBOOK PRO is equipped with a reset switch that allows

you to restart the operating system and preserve saved data.

To perform a soft reset:

Note: Ensure that, if possible, all files and applications

are closed.

Insert a short wire, such as an unfolded paper clip, into the

hole to the right of the right Shift key. Press down to press the

NETBOOK PRO’s Reset switch. Then restart the computer

by pressing the Esc/On key. It is also possible to perform a

soft reset by holding down the Ctrl, Alt, and Delete keys for

three seconds. The computer will restart automatically.

Figure 2.12 Location Of Soft Reset Switch

To perform a hard reset:

Note: When performing a hard reset ensure that the backup

batteries are removed first and replaced last in order

to prevent discharging them unnecessarily.

Remove all batteries and AC power. Once the main battery or

AC power is applied, the NETBOOK PRO will reboot.

Note: Hard resetting the NETBOOK PRO may delete the

ActiveSync partnership on the NETBOOK PRO. If

that occurs, you may delete and re-create the partner-

ship on the PC, or create another partnership with a

new name. Refer to ActiveSync’s online help for more

detail on this operation.

Reset Switch

14 Psion Teklogix NETBOOK PRO Quick Start Guide

3. Product Support Services

Psion Teklogix provides a complete range of product support

services to its customers worldwide. These services include

technical support and product repairs.

3.1 Technical Support

Technical Support for the NETBOOK PRO is provided via e-

mail through the Partner Program website. To reach the web-

site, go to www.psionteklogix.com and click on the Partner

Program link, which takes you to the Partner Program page.

Then click on the “Log-in” button or the “Register” button,

depending on whether you have previously registered for

Teknet or the Partner Program. (Your UserID and password

are the same for TekNet and the Partner Program.)

3.2 Product Repairs

International

For product repairs, please contact your local Psion Teklogix

office (see “Worldwide Offices” on page A-2).

Canada/U.S.A

Canadian and U.S. customers can receive access to repair

services, by calling the toll-free number below, or via our

secure website.

Note: Customers calling the toll-free number should have

their Psion Teklogix customer number or trouble

ticket number available.

Voice: 1 800 387-8898 (press option “2”)

Fax: 1 905 812-6304

Web Site: http://service.psionteklogix.com

NETBOOK PRO

Guía de inicio rápido

4 de abril de 2005 N.º/Ref. 8100010.D

Homologado por el

Sistema de certificación de calidad

ISO 9001

Garantía de devolución a fábrica

Psion Teklogix proporciona una garantía de devolución a fábrica

para su producto válida durante un periodo de doce (12) meses de

acuerdo con la Declaración de Limitación de la Garantía y Limit-

ación de Responsabilidad disponible en el siguiente sitio web:

www.psionteklogix.com/warranty.

Nota: Si todavía no es socio de Teknet e intenta ver esta garantía,

se le pedirá que se registre. Como socio de Teknet, tendrá

acceso a información útil sobre sus productos de Psion Tek-

logix sin cargo alguno.

En algunas regiones, el periodo de la garantía puede ser más largo. Por

favor póngase en contacto con su oficina local de Psion Teklogix para

más detalles. Si desea ver la lista de oficinas, consulte el apartado

“Worldwide Offices” on page A-2 del guía de inicio rápido. Si desea

obtener una copia del manual de usuario de NETBOOK PRO, haga

clic aquí para entrar en el sitio web de Teknet.

Importante: sólo para clientes norteamericanos

Para garantizar un servicio de garantía puntual en Norteamérica, por

favor registre el número de serie de este dispositivo para activar la

cobertura de la garantía poniéndose en contacto con Psion Teklogix

en el teléfono 1-800-835-5644 ext. 209, o por correo electrónico en

la dirección americascontracts@teklogix.com. El no hacer esto

podría afectar a la capacidad de Psion Teklogix para revisar, reparar

o prestar soporte a este dispositivo eficientemente.

Asistencia

Al solicitar asistencia, facilite información relativa a la naturaleza del

fallo y a las acciones que estaba realizando cuando se produjo el

fallo. También es necesario que indique el tipo, modelo y número de

serie del equipo. Antes de devolver ningún producto a Psion Tek-

logix, llame al Grupo de servicio al cliente para que le proporcionen

un número de autorización de devolución.

Servicios de soporte técnico

Psion Teklogix ofrece a sus clientes una completa gama de servicios

de soporte a los productos. Para obtener más información, consulte

el apartado “Servicios de soporte” on page 16.

Descargo de responsabilidad

Se han realizado todos los esfuerzos posibles para que el presente

material sea completo, preciso y se mantenga actualizado. Psion Tek-

logix Inc. se reserva el derecho de realizar modificaciones sin previo

aviso y declina toda responsabilidad por cualquier daño, incluidos,

pero sin limitarse a ellos, los daños derivados causados por la confi-

anza depositada en el presente material, incluidos, pero sin limitarse

a ellos, los errores tipográficos.

Este documento y la información que contiene son propiedad de Psion Teklogix Inc., se proporciona de forma estrictamente confidencial y

queda prohibida la reproducción o copia de la totalidad o de parte de su contenido, excepto si es con el fin exclusivo de fomentar la venta de

servicios y bienes ofrecidos o fabricados por Psion Teklogix. Además, este documento no podrá usarse como base para el diseño, fabricación

o subcontratación o cualquier otro fin que sea lesivo para los intereses de Psion Teklogix Inc.

Todas las marcas comerciales mencionadas son propiedad de sus respectivos titulares.

Guía de inicio rápido de Psion Teklogix NETBOOK PRO1

Índice

Resumen de homologaciones y seguridad . . . . . . . . . . 2

1. Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Primeros pasos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Desembalaje: lista de artículos incluidos . . . . . 3

2.2 Características principales . . . . . . . . . . . . . . . . 4

2.3 Aplicaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.4.1 Windows® CE .NET . . . . . . . . . . . . . . . 5

2.4.2 Información sobre ActiveSync. . . . . . . . 5

2.5 Identificación de las características del producto5

2.6 Instalación de la batería principal. . . . . . . . . . . 7

2.7 Instalación de la batería de reserva. . . . . . . . . . 7

2.8 Encender y apagar el NETBOOK PRO . . . . . . 8

2.9 Primeros pasos . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.10 Administración de energía . . . . . . . . . . . . . . . 9

2.10.1 Calibración de la batería. . . . . . . . . . . . 9

2.10.2 Carga de la batería . . . . . . . . . . . . . . . . 9

2.10.3 ¿Cómo se comprueba el estado de carga

de la batería?. . . . . . . . . . . . . . . . . . . . 10

2.11 Uso del lápiz. . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.12 Tarjetas multimedia y Secure Digital . . . . . . . 11

2.13 Tarjetas Compact Flash . . . . . . . . . . . . . . . . . 11

2.14 Tarjetas PC Card. . . . . . . . . . . . . . . . . . . . . . . 12

2.15 Cuidados del NETBOOK PRO . . . . . . . . . . . 12

2.15.1 Pantalla. . . . . . . . . . . . . . . . . . . . . . . . . 12

2.15.2 Cuidados de la batería . . . . . . . . . . . . . 13

2.15.3 Temperaturas de funcionamiento y almace-

namiento. . . . . . . . . . . . . . . . . . . . . . . . 14

2.16 Cómo restablecer el NETBOOK PRO. . . . . . 14

3. Servicios de soporte . . . . . . . . . . . . . . . . . . . . . . . . . .16

3.1 Soporte técnico . . . . . . . . . . . . . . . . . . . . . . . . 16

3.2 Reparaciones del producto. . . . . . . . . . . . . . . . 16

Appendix A

A.1 Technical Support . . . . . . . . . . . . . . . . . . . . . A-1

A.2 Product Repairs. . . . . . . . . . . . . . . . . . . . . . . A-1

A.3 Worldwide Offices . . . . . . . . . . . . . . . . . . . . A-2

2 Guía de inicio rápido de Psion Teklogix NETBOOK PRO

Resumen de homologaciones y seguridad

INSTRUCCIONES DE SEGURIDAD IMPORTANTES

Al utilizar este producto, siempre deben seguirse las precau-

ciones básicas de seguridad para reducir el riesgo de incen-

dio, descarga eléctrica y lesiones a las personas, incluidas las

siguientes indicaciones:

1. No utilizar este producto cerca del agua, por ejem-

plo, en las proximidades de una bañera, lavabo,

fregadero o pila de lavadero, en sótanos húmedos o

cerca de piscinas.

2. Debe evitarse conectarlo a una red telefónica

durante tormentas eléctricas. Existe riesgo remoto

de descarga eléctrica causada por rayos.

3. No utilizar este producto para informar de un

escape de gas en las proximidades del escape.

Importante: Guarde estas instrucciones.

Información de la FCC para Estados Unidos

Interferencias de radio y televisión

Este equipo es fuente de radiación de energía de radiofre-

cuencia y, si no se utiliza adecuadamente (es decir, siguiendo

estrictamente las instrucciones contenidas en este manual),

puede causar interferencias en las comunicaciones por radio

y la recepción de televisión. Las pruebas realizadas indican

que cumple los límites establecidos para dispositivos digi-

tales de Clase B, según el apartado 15 de la normativa de la

FCC. El funcionamiento está sujeto a las dos condiciones

siguientes:

1. Este dispositivo no puede ser fuente de interferen-

cias perjudiciales, y

2. Este dispositivo debe poder aceptar cualquier inter-

ferencia recibida, incluidas las interferencias que

pueden ser motivo de funcionamiento no deseado.

Estos límites están diseñados para ofrecer una protección

razonable contra interferencias perjudiciales en caso de insta-

lación en zonas residenciales. Sin embargo, no existen

garantías de que en una instalación concreta no vayan a pro-

ducirse interferencias. Si el equipo es fuente de interferencias

perjudiciales en la recepción de radio o televisión, lo cual

puede determinarse apagando y volviendo a encender el

equipo, el usuario debe intentar corregir las interferencias

probando las siguientes medidas:

• Reoriente o coloque la antena de recepción en otro

lugar.

• Aumente la distancia existente entre el equipo y el

receptor.

• Si está utilizando el equipo con un adaptador de con-

exión a la red eléctrica, enchúfelo a una toma que

pertenezca a un circuito distinto de aquel al que está

conectado el receptor.

• Solicite ayuda a un técnico experimentado en radio o

televisión.

Para los clientes residentes en los EE.UU. puede resultar de

ayuda seguir las instrucciones contenidas en el siguiente fol-

leto publicado por la Comisión Federal de Comunicaciones

(FCC): “Cómo identificar y resolver problemas de interferen-

cias de radio-TV”. Este folleto puede obtenerse de la US

Government Printing Office, Washington, DC 20402 - Núm.

de referencia 004-000-00345-4.

La pagina sta caricando ...

Psion Teklogix Netbook Pro none Guida Rapida

Psion Teklogix Netbook Pro none Guida Rapida

in altre lingue

Documenti correlati

Altri documenti