Panasonic TX24J330E Istruzioni per l'uso

OPERATING INSTRUCTIONS

MODE D’EMPLOI

MANUAL DE FUNCIONAMIENTO

INSTRUÇÕES DE UTILIZAÇÃO

ISTRUZIONI DI FUNZIONAMENTO

TX-24J330E

LED TV

Téléviseur LED

Televisor LED

TV a LED

English - 1 -

Contents

Safety Information ................................................... 2

Markings on the Product.......................................... 2

Maintenance ............................................................ 4

Assembling / Removing the pedestal ...................... 4

When using the wall-hanging bracket...................... 5

Environmental Information....................................... 5

Features .................................................................. 6

Accessories Included............................................... 6

 ............................................... 6

TV Control & Operation ........................................... 6

Using Main TV Menu ............................................... 7

Inserting the Batteries into the Remote ................... 7

Power Connection ................................................... 8

Antenna Connection ................................................ 8

 ................................................. 8

Disposal of Old Equipment and Batteries ................ 8

Declaration of Conformity (DoC) ............................. 8

 ............................................................ 9

Notice ...................................................................... 9

Remote Control ..................................................... 10

Connections........................................................... 11

 .................................................... 12

First Time Installation............................................. 12

Media Playback via USB Input .............................. 13

Media Browser....................................................... 13

CEC ....................................................................... 13

Settings Menu Contents ........................................ 15

General TV Operation ........................................... 18

Using the Channel List .......................................... 18

 ................................ 18

Electronic Programme Guide ................................ 18

Teletext Services ................................................... 19

Software Upgrade.................................................. 19

Troubleshooting & Tips .......................................... 19

PC Input Typical Display Modes ............................20

AV and HDMI Signal Compatibility ........................20

Supported File Formats for USB Mode ................. 21

Supported DVI Resolutions ................................... 22

DVB functionality information ................................ 22

English - 2 -

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the related

features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby



IMPORTANT - Please read these instructions

fully before installing or operating

WARNING: This device is intended to be used

by persons (including children) who are

capable / experienced of operating such a device

unsupervised, unless they have been given

supervision or instruction concerning the use of

the device by a person responsible for their safety.

• Use this TV set at an altitude of less than 2000 meters

above the sea level, in dry locations and in regions

with moderate or tropical climates.

• The TV set is intended for household and similar

general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering

or blocking the ventilation openings with items, such

as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.



you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands as

this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced, this



• Do not expose the TV to dripping or splashing of



such as vases, cups, etc. on or over the TV (e.g.,

on shelves above the unit).

• Do not expose the TV to direct sunlight or do not



or near the TV.

• Do not place any heat sources such as electric

heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined

surfaces.

•        

out of the reach of the babies, children and domestic

animals.

• Carefully attach the stand to the TV. If the stand is

    

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with



WARNING

• Batteries must not be exposed to excessive heat



• Excessive sound pressure from earphones or

headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially

children, push or hit the screen, push anything

into holes, slots or any other openings in the case.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

i

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

CLASS 1

LASER PRODUCT

Class 1 Laser Product: This

product contains Class 1

laser source that is safe under

reasonably foreseeable

conditions of operation.

English - 3 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the product

may contain a coin/button cell battery. If the coin/button

cell battery is swallowed, it can cause severe internal

burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

– – – – – – – – – – – –

A television may fall, causing serious personal injury

or death. Many injuries, particularly to children, can be

avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting

methods recommended by the manufacturer of the

television set.

• ALWAYS use furniture that can safely support the

television set.

• ALWAYS ensure the television set is not overhanging

the edge of the supporting furniture.

• ALWAYS educate children about the dangers of

climbing on furniture to reach the television set or

its controls.

• ALWAYS route cords and cables connected to your

television so they cannot be tripped over, pulled or

grabbed.

• NEVER place a television set in an unstable location.

• NEVER place the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• NEVER place the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

• NEVER place items that might tempt children to

climb, such as toys and remote controls, on the top

of the television or furniture on which the television

is placed.

• The equipment is only suitable for mounting at



If the existing television set is going to be retained and

relocated, the same considerations as above should

be applied.

– – – – – – – – – – – –

Apparatus connected to the protective earthing of the

building installation through the MAINS connection or

through other apparatus with a connection to protective

earthing – and to a television distribution system using



hazard. Connection to a television distribution system

has therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator)

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

• The wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• 

accessories.

• 

the TV from fall. Do not over-tighten the screws.

WARNING

• Using other wall-hanging brackets, or installing

a wall-hanging bracket by yourself have the risk

of personal injury and product damage. In order

to maintain the unit’s performance and safety, be

absolutely sure to ask your dealer or a licensed

contractor to secure the wall-hanging brackets.

Any damage caused by installing without a



• Carefully read the instructions accompanying

optional accessories, and be absolutely sure to



• Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.

•  

Always ensure that there are no electrical cables

or pipes in the wall before hanging bracket.

• To prevent fall and injury, remove the TV from



Figures and illustrations in this user manual are



actual product appearance. Product design and



English - 4 -

Assembling / Removing the pedestal

Preparations

Take out the pedestal(s) and the TV from the packing

case and put the TV onto a work table with the screen

panel down on the clean and soft cloth (blanket, etc.)

• 

• Do not hold the screen panel part.

• Make sure not to scratch or break the TV.

Assembling the pedestal

1. The stand of the TV consists of two pieces. Install

these pieces together.

x2

2. Place the stand(s) on the stand mounting

pattern(s) on the rear side of the TV.

3. Insert the screws (M4 x 12) provided and tighten



x4

Maintenance

       

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,

or pedestal by using a soft cloth to remove dirt or



For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

3.     

let liquid enter the TV inside as it may lead to

product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile substances.

This may degrade surface quality or cause peeling

of the paint.

• The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap



hard objects.

• Do not allow the cabinet and pedestal to make

contact with a rubber or PVC substance for a long

time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular

intervals.



English - 5 -

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

BacklightCustom and adjust

the Backlight (located under the Energy Saving

setting) manually using Left or Right buttons on the

remote. Set as 

Note: Available Energy Saving options may dier depending

on the selected Mode in the Settings>Picture menu.

The Energy Saving settings can be found in the Set-

tings>Picture menu. Note that some picture settings

will be unavailable to be changed.

If pressed Right button or Left button consecutively,

“

Proceed and press

OK        



Press any button on the remote or on the TV to turn

the screen on again.

Note: Screen O option is not available if the Mode is set

to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way

when using the wall-hanging bracket or repacking

the TV.

• Put the TV onto a work table with the screen panel

down on the clean and soft cloth. Leave the stand(s)

protruding over the edge of the surface.

• 

• Remove the stand(s).

When using the wall-hanging bracket

Please contact your local Panasonic dealer to

purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

a

b

a (mm)

75

b (mm)

75

View from the side

c

VESA

Bracket

d

(d)

Depth of screw (c)

min. 7 mm

max. 10 mm

Diameter M4

Note: The screws for xing the TV onto the wall-hanging

bracket are not supplied with the TV.

English - 6 -

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours

• Sleep timer

• Child lock

• Automatic sound mute when no transmission

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• 

Accessories Included

• Remote Control

• Batteries: 2 x AA

• Instruction Book

• Detachable stand

• Stand mounting screws (M4 x 12)



If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.”

The Auto TV OFF option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as 

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-on

the TV, the following message will be displayed. “TV

switched to stand-by mode automatically because

no operation was made for a long time.” Before the

TV switches into standby mode a dialogue window will

be displayed. If you do not press any button the TV

will switch into the standby mode after a waiting period

of about 5 minutes. You can highlight Yes and press

OK to switch the TV into standby mode immediately.

If you highlight No and press OK, the TV will remain

on. You can also choose to cancel the Auto TV OFF

function from this dialogue. Highlight Disable and

press OK, the TV will remain on and the function will

be cancelled. You can enable this function again by

changing the setting of the Auto TV OFF option from

the Settings>System>More menu.

TV Control & Operation

1. Up direction

2. Down direction

3.       



The Control button allows you to control the Volume

/ Programme / Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button

in, the information banner will appear on the screen.

Scroll through the stored channels by pushing the

button up or down.

To change source: Press the middle of the button in

twice(for the second time in total), the source list will

appear on the screen. Scroll through the available

sources by pushing the button up or down.

 Press the middle of the button in

and hold it down for a few seconds, the TV will turn

into standby mode.

To turn on the TV: Press the middle of the button in,

the TV will turn on.

Notes:

If you turn the TV o, this cycle starts again beginning with

the volume setting.

Main menu OSD cannot be displayed via control button.

Operation with the Remote Control

Press the Home button on your remote control to

display main menu. Use the directional buttons and

English - 7 -

OK button to navigate and set. Press Return/Back

or Home button to quit a menu screen.

Input Selection

Once you have connected external systems to your

the

Source button on your remote control consecutively



Changing Channels and Volume

You can change the channel and adjust the volume

by using the Programme +/- and Volume +/- buttons

on the remote.

Using Main TV Menu

When the Home button is pressed, the main TV

menu will appear at the bottom of the screen. You can

navigate through the menu items using the directional

buttons on the remote. To select an item or see the

sub-menu options of the highlighted menu press OK

button. When you highlight a menu option some of the

sub-menu items of this menu may appear on the upper

side of the menu bar for quick access. To use a quick

access item highlight it, press OK and set as desired



press OK or Back/Return button to exit.

Press Exit button to close the main menu.

1. Home

When main menu is opened Home menu bar will

be highlighted. The content of the Home menu can

be customised by adding options from other menus.

Just highlight an option and press the Down direction

button on the remote. If you see Add to Home option

you can add it to the Home menu. Same way you

can delete or change the position of any item in the

Home menu. Press the Down direction button and

select Delete or Move option and press OK. In order

to move a menu item use the Right and Left direction

buttons to select the position that you want the item

to move to and press OK.

2. TV

2.1. Guide

You can access the electronic programme guide menu

using this option. Refer to Electronic Programme

Guide section for more information.

2.2. Channels

You can access the Channels menu using this option.

Refer to Using the Channel List section for more

information.

2.3. Timers

You can set timers for future events using the options of

this menu. You can also review the previously created

timers under this menu.

To add a new timer select the Add Timer tab using the

Left/Right buttons and press OK. Set the sub-menu

OK. A new

timer will be created.

To edit a previously created timer, highlight that timer,

select the Edit Selected Timer tab and press OK.

Change the sub-menu options as desired and press

OK to save your settings.

To cancel an already set timer, highlight that timer,

select Delete Selected Timer tab and press OK. A

Yes

and press OK to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events



time interval. In this case you will be asked to choose

one of these timers and cancel others. Highlight the

timer you want to cancel and press OK, Options menu

will be displayed. Then highlight Set/Cancel and press

OK to cancel that timer. You will have to save changes

after that. In order to do that press OK, highlight Save

Changes and press OK again.

3. Settings

You can manage the settings of your TV using the op

-

tions of this menu. Refer to Settings Menu Contents

section for more information.

4. Sources

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

4.1. Source Settings

       



Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart

-

ment. Insert two size AA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat



English - 8 -

Power Connection

IMPORTANT: The TV set is designed to operate on a

220-240V AC, 50 Hz supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT.) socket or satellite plug to the SATELLITE

INPUT (LNB) socket located on the rear side of the TV.

Rear side of the TV

1

2

1. Satellite

2. Aerial or cable

If you want to connect a device to the TV, make



before making any connection. After the connection

is done, you can turn on the units and use them.



     

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator,

Inc.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio, and the double-D symbol

are trademarks of Dolby Laboratories Licensing

Corporation.

The “CI Plus” Logo is a trademark of CI Plus LLP.

Disposal of Old Equipment and Batteries

Only for European Union and

countries with recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries must not

be mixed with general household waste.

For proper treatment, recovery and

recycling of old products and batteries,

please take them to applicable collection

points in accordance with your national

legislation.

By disposing of them correctly, you will

help to save valuable resouces and

  

on human health and the environment.

For more information about collection

and recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol

(bottom symbol):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

Declaration of Conformity (DoC)

Hereby, Panasonic Marketing Europe GmbH, declares

that this TV is in compliance with the essential require

-

ments and other relevant provisions of the Directive

2014/53/EU.

If you want to get a copy of the original DoC of this TV,

please visit the following website:

http://www.ptc.panasonic.eu/compliance-documents

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Web Site: http://www.panasonic.com

English - 9 -



TV Broadcasting

PAL BG/I/DK

SECAM BG/DK

Receiving Channels

VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Digital Reception





(DVB-T-C-S)



Number of Preset

Channels

8 000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio A2 Stereo+Nicam Stereo

Headphone 3.5 mm mini stereo jack

Audio Output Power

(WRMS.) (10% THD)

2 x 2,5 W

Power Consumption (W)

45 W

Weight (kg)

3,75 Kg

TV Dimensions DxLxH

(with stand) (mm)

134 x 553 x 372

TV Dimensions DxLxH

(without stand) (mm)

63 x 553 x 334



16/9 24”

Operation temperature

and operation humidity

0ºC up to 40ºC, 85%

humidity max

For more product information, please visit

EPREL: https://eprel.ec.europa.eu.

EPREL registration number is available on

https://eprel.panasonic.eu/product.

Notice

DVB / Data broadcasting

• This TV is designed to meet the standards (as of

August, 2019) of DVB-T / T2 (MPEG2, MPEG4-

AVC(H.264) and HEVC(H.265)) digital terrestrial

services, DVB-C (MPEG2, MPEG4-AVC(H.264)

and HEVC(H.265)) digital cable services and DVB-S

(MPEG2, MPEG4-AVC(H.264) and HEVC(H.265))

digital satellite services.

Consult your local dealer for availability of DVB-T /

T2 or DVB-S services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.

• This TV may not work correctly with the signal which

does not meet the standards of DVB-T / T2, DVB-C

or DVB-S.

• Not all the features are available depending on the

country, area, broadcaster, service provider and

satellite environment.

• Not all CI modules work properly with this TV. Consult

your service provider about the available CI module.

• This TV may not work correctly with CI module that

is not approved by the service provider.

• Additional fees may be charged depending on the

service provider.

• The compatibility with future services is not

guaranteed.

English - 10 -

Remote Control

1. Standby:

2. Play: Starts to play selected media

3. Rewind: Moves frames backwards in media such

as movies

4. Pause: Pauses the media being played

5. Guide: Displays the electronic programme guide

6. Directional buttons: Helps navigate menus,

content etc. and displays the subpages in TXT

mode when pressed Right or Left

7. OK:

TXT mode), views Channels menu (DTV mode)

8. Exit: Closes and exits from displayed menus or

returns to previous screen

9. Coloured Buttons: Follow the on-screen instruc-

tions for coloured button functions

10. Home: Displays TV menu

11. Volume +/-

12. Numeric buttons: Switches the channel, enters

a number or a letter in the text box on the screen,

switches the TV on when in standby mode

13. Language: Switches among sound modes (an-

alogue TV), displays and changes audio/subtitle



where available)

14. Text: Displays teletext (where available), press

again to superimpose the teletext over a normal

broadcast picture (mix)

15. Mute:

16. Programme +/-: Programme up-down, Page up-

down (in TXT mode), switches the TV on when in

standby mode

17. Back/Return: Returns to previous screen, previous

menu, opens index page (in TXT mode). Quickly

cycles between previous and current channels

or sources

18. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

19. Stop: Stops the media being played

20. Fast Forward: Moves frames forward in media

such as movies

21. No function

22. Source: Shows available broadcast and content

sources

English - 11 -

Connections

Connector Type Cables Device

VGA

Connection

(back)

AUDIO IN

PC/YPbPr

Audio

Connection

(side)

YPbPr/PC Audio Cable

HDMI

Connection

(back)

Scart

Connection

(back)

YPBPR

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

Audio/Video Cable

SPDIF

(Coaxial Out)

Connection

(back)

HEADPHONE

Headphone

Connection

(side)

USB

Connection

(side)

CI

Connection

(side)

CAM

module

See the illustrations on the left

side. You can use YPbPr to VGA

cable to enable YPbPr signal via

VGA input. You cannot use VGA

and YPbPr at the same time.

To enable PC/YPbPr audio, you

will need to use the side audio

inputs with a YPbPr/PC audio

cable for audio connection. If

an external device is connect-

ed via the SCART socket, the

TV may automatically switch to

EXT1 mode. When receiving DTV

channels (Mpeg4 H.264, H.265)

or while in Media Browser mode,

output will not be available via the

scart socket. When using the wall

mounting kit (available from a

third party in the market, if not

supplied), we recommend that

you plug all your cables into the

back of the TV before mounting

on the wall. Insert or remove the

CI module only when the TV is

SWITCHED OFF. You should

refer to the module instruction

manual for details of the settings.

The/Each USB input of your TV

supports devices up to 500mA.

Connecting devices that have

current value above 500mA may

damage your TV. When connect-

ing equipment using a HDMI

cable to your TV, to guarantee

scient immunity against para-

sitic frequency radiation, you have

to use a high speed shielded (high

grade) HDMI cable with ferrites.



any connection. After the connection is done, you can turn on the units and use them.

English - 12 -



To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the centre of the joystick on the TV in or push

it up/down.



Press the Standby button on the remote control or

press the centre of the joystick on the TV in and hold

it down for a few seconds, the TV will switch into

standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as tandby Mode

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

On the second screen set your country preference.

Depending on the country selection you may be asked



cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option in the next step.



environment and depending on the TV model being

used, the supported features of it may be displayed on

the side of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in Settings>System>More menu and can



OK to continue.

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight

it and press OK. The checkbox next to the selected



clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should be

made. Antenna Type

can select Antenna Type as Direct, Single Satellite

Cable or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and  options will be available. You

can change the transponder and LNB settings using

the related menu options.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

    

screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. Then

set the DiSEqC version and press OK

You can set up to four satellites (if available) for

version v1.0 and sixteen satellites for version v1.1

on the next screen. Press OK

satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

English - 13 -

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Home button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK .

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT!

before connecting them to the TV. Manufacturer will



Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting.

Wait a little while before each plugging and unplugging



so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive



You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Browser menu

can only display 1000 image les stored on the connected

USB device.

Media Browser



photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OKOK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button



 Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change



Only Sound Settings menu will be available while



Loop/Shue Mode Operation

Start playback and activate



continuously played in

original order

Start playback and activate



played continuously

(repeat)

Start playback and activate



played once in random

order

Start playback and activate

,



continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>More menu

should be set as EnabledSource

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>More

menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV does not mute its other

audio outputs automatically. You will need to decrease

TV volume to zero manually if you wish to hear the

ARC audio only (same as optical or co-axial digital

audio outputs). If you want to change connected

device’s volume level, you should select that device

English - 14 -

from the source list. In that case volume control keys

are directed to connected audio device. When using

the ARC connection, some incompatibilities may occur

between the TV and the connected sound system due

   When

using the ARC connection, some incompatibilities

may occur between the TV and the connected sound

       

ranges.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

  

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the Settings>System>More

menu as . The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 15 -

Settings Menu Contents

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can

be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,

 or .

Note: Available options may dier depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if the

Energy Saving is set to an option other than Custom.

Advanced Settings

Dynamic

Contrast

You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce

the amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options

are available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom

Sets the desired image size format.

Picture Shift

This option may be available depending on the Picture Zoom setting. Highlight and

press OK, then use directional buttons to shift the picture upwards or downwards.

Film Mode





Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature

to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

If the image is not centered in VGA mode use this option to automatically adjust the position

of the image. Press OK to start the auto adjustment.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on

the screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu

while in PC mode.

English - 16 -

Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Sound Mode

You can select a sound mode (If the viewed channel supports).

AVL (Automatic

Volume Limiting)



Headphone/Lineout



select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone. If it

is set to Lineout, the output from the headphone socket will be set to maximum which

could damage your hearing.

Dynamic Bass

Enables or disables the Dynamic Bass.

Surround sound

Surround sound mode can be changed as On or .

Digital Out

Sets digital out audio type.

Installation Menu Contents

Automatic channel

scan (Retune)

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. 

Manual channel

scan

This feature can be used for direct broadcast entry.

Network channel

scan

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial

network channels. D. Cable: Searches for cable network channels. Satellite: Searches

for satellite network channels.





if no analogue channels are stored and if currently watched channel is not an analogue

channel.

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan.

Installation Settings

(optional)

Displays installation settings menu. Standby Mode Search (*): Your TV will search for

new or missing channels while in standby. Any new found broadcasts will be shown.

Dynamic Channel Update(*): If this option is set as Enabled, the changes on the

broadcasts such as frequency, channel name, subtitle language etc., will be applied

automatically while watching.

(*) Availability depends on model.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.

First time installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 17 -

System Menu Contents

Conditional Access

Controls conditional access modules when available.

Language



Parental

Enter correct password to change parental settings. You can easily adjust Menu Lock,

Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN

or change the Default CICAM PIN using the related options.

Note: Some menu options may not be available depending on the country selection in the First Time

Installation. Default PIN could have been set to 0000 or 1234. If you have dened the PIN(is requested

depending on the country selection) during the First Time Installation use the PIN that you have dened.

Date/Time

Sets date and time.

Sources

Edit the names, enable or disable selected source options.

Accessibility

Displays accessibility options of the TV.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio

Description

A narration track will be played for the blind or visually impaired audience. Press OK

to see all available Audio Description menu options. This feature is available only if

the broadcaster supports it.

More

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

Standby Mode

LED

If set as  the standby mode LED will not light up when the TV is in standby mode.

Software

Upgrade

OK to see the menu options.

Application

Version

Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle /

Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available

only for the country option of Norway.

Auto TV OFF

Sets the desired time for the TV to automatically go into standby mode when not being

operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also

disable this option by setting as .



Biss is a satellite signal scrambling system that is used for some broadcasts. If you

need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and

press OK to enter keys on the desired broadcast.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some items

in the TV menu may not be available.

Power Up Mode

Last State and Standby Mode

options are available.

CEC

With this setting you can enable and disable CEC functionality completely. Press Left

or Right button to enable or disable the feature.

CEC Auto Power

On

This function allows the connected HDMI-CEC compatible device to turn on the TV

and switch to its input source automatically. Press Left or Right button to enable or

disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as .

You can use the remote control of the TV to control the volume of the audio device.

OSS

Displays Open Source Software license information.

Note: Some

options may not be available depending on the model of your TV, its features and the selected country in the First Time Installation.

English - 18 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the channel list. You

can edit this channel list, set favourites or set active

stations to be listed by using the Channels menu

options. Press the OK button to open the channel list.



changes in the current list using the Filter and Edit

tab options. Highlight the tab you want and press OK

to see available options.

Managing the Favourite Lists

    

channels. Enter the TV>Channels menu or press

the OK button in order to open the Channels menu.

Highlight the Edit tab and press OK to see the editing

options and select the Tag/Untag channel option.

Select the desired channel on the list by pressing the

OK button while the channel is highlighted. You can

make multiple choices. You can also use the Tag/

Untag all option to select all channels on the list.

Then press Back/Return button to return to the Edit

menu options. Select Add/Remove Favourites option

and press the OK button again. Favourite channel list

options will be displayed. Set the desired list option

to On. The selected channel/s will be added to the

list. In order to remove a channel or channels from a

favourite list follow the same steps and set the desired

list option to .

Channels menu

 permanently

according to your preferences. For instance, using the

options of the Filter tab, you can set one of your four

favourite lists to be displayed every time the channel

list is opened.



The Parental menu options can be used to prohibit

users from viewing of certain programmes, channels

and using of menus. These settings are located in the

Settings> System>Parental menu.

To display parental lock menu options, a PIN should be

entered. After coding the correct PIN, Parental menu

will be displayed.

Menu Lock: This setting enables or disables access

to all menus or installation menus of the TV.

Maturity Lock: If this option is set, TV gets the maturity

information from the broadcast and if this maturity level

is disabled, prohibits access to the broadcast.

Note: If the country option in the First Time Installation is

set as France, Italy or Austria, Maturity Lock’s value will be

set to 18 as default.

Child Lock: If this option is set to On, the TV can only

be controlled by the remote control. In this case the

control buttons on the TV will not work.

Set PIN:

Default CICAM PIN: This option will appear as greyed

out if no CI module is inserted into the CI slot of the

TV. You can change the default PIN of the CI CAM

using this option.

Note: Default PIN could have been set to 0000 or 1234. If you

have dened the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

Some options may not be available depending on the model

and/or on the country selection in the First Time Installation.

Electronic Programme Guide

By means of electronic programme guide function of

your TV you can browse the event schedule of the

currently installed channels on your channel list. It

depends on the related broadcast whether this feature

is supported or not.

To access the programme guide, press the Guide

button on your remote. You can also use the Guide

option under TV menu.

There are 2 different types of schedule layouts

available, Timeline Schedule and Now/Next. To

switch between these layouts highlight the tab with

the name of the alternative layout on the upper side

of the screen and press OK.

Use the directional buttons to navigate through the

programme guide. Use the Back/Return button to

use the tab options on the upper side of the screen.

Timeline Schedule

In this layout option, all events of the listed channels will

be displayed by timeline. You can use the directional

buttons to scroll through the list of the events. Highlight

an event and press OK to display event options menu.

Press Back/Return button to use available tab options.

Highlight Filter tab and press OK

options. To change the layout highlight Now/Next and

press OK. You can use the Previous Day and Next

Day options to display the events of the previous and

next day.

Highlight Extras tab and press OK to access below

options.

Highlight Genre: Displays Highlight Genre menu.

Select a genre and press OK. The events in the

programme guide matching the selected genre will

be highlighted.

Guide Search: Displays searching options. Using

these options, you can search the programme guide

database in accordance with the selected criteria.

Matching results will be listed.

Now: Displays current event of the highlighted

channel.

Zoom: Highlight and press OK to see events in a

wider time interval.

English - 19 -

Now/Next Schedule

In this layout option, only the current and next events

of the listed channels will be displayed. You can use

the directional buttons to scroll through the list of the

events.

Press Back/Return button to use available tab options.

Highlight Filter tab and press OK

options. To change the layout highlight Timeline

Schedule and press OK.

Event Options

Use the directional buttons to highlight an event

and press OK button to display Options menu. The

following options are available.

Select Channel: Using this option, you can switch

to the selected channel in order to watch it. The

programme guide will be closed.

More Info: Display detailed information on the selected

event. Use up and down directional buttons to scroll

through the text.

Set Timer on Event / Delete Timer on Event: Select

Set Timer on Event option and press OK. You can set

timers for future events. To cancel an already set timer,

highlight that event and press the OK button. Then

select Delete Timer on Event option. The timer will

be cancelled.

Notes: You cannot switch to any other channel while there is

an active timer on the current channel.

It is not possible to set timer for two or more individual events

at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.

When the Text button is pressed again, the TV returns

to television broadcast.

Software Upgrade



automatically via the broadcast signal.

Software upgrade search via user interface

On the main menu select Settings>System and then

More. Navigate to Software upgrade and press the

OK button. Then select Scan for upgrade and press

OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download the

upgrade. After the download is completed, a warning

will be displayed, press OK button to complete software

upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock

if Automatic scanning option is set to Enabled and

if the TV is connected to an aerial signal. If a new

software is found and downloaded successfully, it will

be installed at the next power on.

Note: Do not unplug the power cord while led is blinking during

the reboot process. If the TV fails to come on after the upgrade,

unplug, wait for two minutes then plug it back in.

All updates are automatically controlled. If a manual search

is carried out and no software is found then this is the current

version.

Troubleshooting & Tips

TV will not turn on

Make sure the power cord is plugged in securely to a

wall outlet. Press the Power button on the TV.

Poor picture

• Check if you have correctly tuned the TV.

• Low signal level can cause picture distortion. Please

check antenna connections.

• Check if you have entered the correct channel

frequency if you have performed manual tuning.

No picture

• TV is not receiving any signal. Make sure the correct

source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV sound is muted. Press the Mute

button or increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

• The batteries maybe inserted incorrectly. Refer to

the section “Inserting the Batteries into the Remote”.

No signal on an input source

• It is possible that no device is connected.

• Check the AV cables and connections from your

device.

• Check the device is switched on.

La pagina sta caricando ...

Panasonic TX24J330E Istruzioni per l'uso

Panasonic TX24J330E Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti