DEPSTECH WF010 Manuale utente

Categoria
Cellulari
Tipo
Manuale utente
Multi-Language User Manual
FHD Inspection Camera
WF010
EN
DE
01 - 11
ES
12 - 22
IT
23 - 33
FR
34 - 44
45 - 55
JP
56 - 65
Catalog
Facebook Official Page: @DEPSTECH. FANS
www.depstech.com
English
01
Product Structure
1. Power Button ON / OFF
2. Camera LEDs dimmer:
Roll to control the brightness of the camera LEDs
3. WiFi signal indicator:
Blue LED flash: Ready to pair
Blue LED stay on: Connect successfully
4. Power indicator:
Red LED stay on: Power system work normally
Red LED flash: Low battery
Green LED stay on: Charging status
5. Reset Button:
Long press the reset button for 7Sthe product will restore
to factory settings.
6. Micro-USB charging port
1 2 5
6
3
4
02
Step 1- APP Downloading
Register
After downloading the APP, it is necessary to register a personal
account before using.
Register and log in
Fill in email - fill in password - view agreement - click register.
Please log in after successful registration. (Note: Please keep your
mobile phone connected with network during registration)
For iOS user (iOS 9+), search and download
“DEPSTECH-View” app from APP Store.
For Android user (Android 7.0+), search and download
“DEPSTECH-View” from Google Play Store.
iOS & Android
Android iOS
03
Step 2- Power on
Push the power button to “ON” to open the endoscope.
Step 3- WiFi Connection
A. Turn to the WiFi setting on your smart devices (Android /
iOS phone), search for the factory setting WiFi SSID:
DEPSTECH_****** or Jetion_******
B. Then choose and fill the factory setting WiFi password:
12345678
Note: Before using the product for the first time, please fully charge it.
Note: “******” will be a series of random numbers& letters, and it
may take several seconds to wait for the WiFi signal and the wifi
connection. Please be patient for the process.
Blue Wi-Fi LED Indicator light
Red Power LED Indicator light
04
Step 4- Return to the APP
Note:
If the endoscope and your smart device connected successfully,
you can receive the real-time images of the endoscope via the
DEPSTECH-View APP, and the blue LED of the endoscope Wi-Fi
transmiter will stay on.
05
2
3
4
5
1
APP Introduction
Rotate Button: Click to rotate the image 90°
Photo Shoot Button: Click to take a photo
Record Button: Click to start / end a video record
Buttons Hidden Function:
Click the screen to hide / wake the buttons.
Zoom in / Zoom out Function:
Two fingers expand outwards to zoom in the real- time image.
Two fingers get close to zoom out the real- time image.
Gallery Button: Click to check the photos / videos
Setting Button: Click to enter the setting
2
3
4
5
1
06
APP Introduction (For WiFi SSID: DEPSTECH_******)
Resolution: Click to choose different resolution.
WiFi Setting: Click to modify the WiFi SSID and Password.
After setup please remember to click reset button.
Channel Switch: Click to switch 2.4G&5G WiFi signal.
07
Charging Guide
1. Connect the device to the DC 5V USB adapter for charging;
2. During the charging process, the green LED indicator light will be
steady on.
3. When the device is fully charged, the green LED indicator will go out.
Guide for Accessories Installation
Turn counterclockwise-remove
accessories
Turn clockwise-tighten
accessories
Optical sensor
Resolution
Viewing angle
Depth of field
Diameter of lens tube
Working voltage and current
Wi-Fi frequency bands
WiFi Transmission Distance
Waterproof Grade
CMOS
Max. 1920*1080px
67°±3°
1.18-3.15 in
0.334 in
DC 5V/2A
2.4G
16.5 ft (without any obstacles)
IP67 (for lens/tube only)
Product parameter
08
FAQ& Help
Q1: How to connect WiFi endoscope to "DEPSTECH-View"?
A1: 1. Make sure the device is fully charged, long press the power button
or press the switch to turn on the device. The WiFi module will turn
on about 15 seconds after turning on the device. You can observe
whether the WiFi signal light (blue light) of the device is always on.
If it is on, it indicates that the WiFi module is ready;
2. Enter the phone's "Settings" - "WiFi Connection" to find the WiFi
name printed on the device; select and connect, the default
password is "12345678". If the phone prompts "Internet may be
unavailable", please ignore the prompt and select "Keep
Connected";
3. Open this App and get real-time images of the endoscope. While
the App is acquiring the device image, the WiFi signal light will
flash. If the image cannot be obtained during the flashing process,
please contact the seller of the device.
Q2: The mobile phone cannot get the real-time image of the WiFi
endoscope or the screen went black?
A2: Please follow the steps below to solve the problems.
1. Please try to restart the device after fully charged.
2. There is a reset hole near the charging port of the device. Please
use reset pin to insert the reset hole. Please make sure that
you've reached the reset button with the reset pin, and the device
will turn on again.
3. Please turn off the "WiFi" function of other mobile phones that have
been connected to this WiFi endoscope at home.
4. Turn on the phone in airplane mode, search for the WiFi signal
identified on the device body, select and connect it, the default
password is "12345678";
5. It should be noted that during the installation of this App, you need
to authorize the "photo/media content" and "document storage"
permissions of this App, otherwise some functions such as taking
pictures/viewing albums may be hindered;
09
FAQ& Help
Q3: Can search for the Wi-Fi signal, but couldn’t get the connection?
A3:
Q4: When the product is in use, it flickers, freezes or disconnects?
A4:
1. The Wi-Fi connection may be failing, you’ve to forget the network
and reconnect it. Also, you can change to an some place without
Wi-Fi distribute and retry the connection.
2. For Android user, at the first time of connecting to the Wi-Fi
signal, the phone may tip "Internet may not be available", please
click "Keep Wi-Fi connection" option.
3. For iOS user, please make sure that you’ve turn on the "Cellular
data" and "Native network" option in the settings -
“DEPSTECH-View”.
4. For user who used to modified the Wi-Fi-SSID / password before,
please use a reset pin and plug it into the reset port of the
endoscope. You can refer to lable on the bottom to the default
Wi-Fi SSID / Password and reconnect it.
1. Please make sure that the Wi-Fi endoscope is within 5 meters of
your mobile phone and there is no obstacle between them.
2. When using this Wi-Fi endoscope, please stay away from other
hotspots with strong Wi-Fi signal, or turn off other hotspots.
3. Check whether the power of the device is normal and whether the
power indicator is flashing; if the power is insufficient, please fully
charge it before use;
Note:
If the malfunction cannot be solved after the above operations,
please contact us via email [email protected]
6. For iOS users(especially iOS 14), please enter the "Settings"
interface of the phone, find and click “DEPSTECH-View”, then
turn on the "Cellular Data" and "Native network"option, otherwise
it may not be able to establish communication with the device.
10
SAFETY & MAINTENANCE INFO
Please remember to turn off the endoscope and place it in a dry environment
after per use. You can use soft cotton cloth with little alcohol to keep the
camera lens clear, which also does great help to capture the best image.
Besides, for every three month you should charge and use your electric
devices regularly, which will do great help to extend the battery life.
The storage temperature should between 32-158. And the working
temperature should between 32-113. Besides, the Childs can only operate
this device with the guidance of adults, please don’t let them operate the
device alone.
Please keep the device away from fire source/ liquid/ acidic. These may
increase the risk of electrical shocks and damages of the device.
The unit is not shock-resistant. Please avoid high impact results from things
such as dropping the unit from height.
The lens and the tube are water resistant when the unit is fully assembled,
but the WiFi box isn’t. Which means IP67 waterproof only available for the
camera probe part, and the camera part support underwater inspections
within 3.33ft / 30 mins.
Note: Do not immerse the WiFi box in water
According to the guidance of WEEE, attention should be given to the
environmental aspects of battery disposal.
It's normal that the camera will turn hot, especially when the camera LED turn
to the brightest level, but it won’t affect the regular usage or the lifespan of
the endoscope.
The WiFi transmission distance is about 16.5ft without any obstacles. Please
keep the distance between WiFi box and the phone/ tablet within 16.5ft.
Please Keep the unit away from strong WiFi disturb area while using.
Otherwise, it may affect the WiFi connection between the WiFi box and the
smartphone.
For your safety and better using experience, please read the
instructions carefully before using.
11
FCC statement: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interface;
2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info
2013/56/EU (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU and Amendment
(EU) 2015/863.
Deutsch
12
Angabe über die Bestandteile des Produkts
1. Power-Taste ein / aus
2. Dimmer der Kamera-LED:
Scrollen Sie, um die Helligkeit der Kamera-LED zu steuern.
3. WiFi-Signalanzeige:
Blaue LED blinkt: Bereit zum Pairing
Blaue LED leuchtet immer: Verbindung ist erfolgreich
4. Betriebsanzeige:
Die rote LED leuchtet immer: Das Stromversorgungssystem
funktioniert normal
Rote LED blinkt: Batterie schwach
Grüne LED leuchtet immer: Ladestatus
5. Reset-Taste:
Drücken Sie lange die Reset-Taste für 7S, das Produkt wird
auf die Werkseinstellungen zurückgesetzt.
6. Mikro-USB-Ladeanschluss
1 2 5
6
3
4
Schritt 1 – App herunterladen
Registrierung
Nach dem Herunterladen der App müssen Sie ein persönliches Konto
registrieren, bevor Sie sie verwenden.
Registrierungs- und Anmeldemethode
Geben Sie bitte die E-Mail und das Passwort ein, lesen die Vereinbarung
und klicken Sie auf die Registrierung, dann ist sie erfolgt. Nach
erfolgreicher Registrierung können Sie sich anmelden. (Hinweis: Ihr
Handy muss bei der Registrierung mit Netzwerk verbunden werden.)
iOS Benutzer (iOS 9+) Können im App Store nach
„DEPSTECH-View“ App suchen und sie herunterladen.
Android Benutzer (Android 7.0+) Können im Google Play
Store nach „DEPSTECH-View“ suchen und sie herunterladen.
13
iOS & Android
Android iOS
Schritt 2 – Aktivierung des Gerätes
Drücken Sie den Netzschalter auf „ON“, um das Endoskop zu
öffnen.
Schritt 3- WiFi-Verbindung
A. Schalten Sie die WiFi-Einstellung auf Ihren Smart-Geräten
ein (Android / iOS phone), suchen Sie nach der Werksein-
stellung WiFi SSID: DEPSTECH_****** oder Jetion_******
B. Wählen Sie das WiFi-Passwort für die Werkseinstellung aus
und geben Sie das Passwort ein: 12345678
Hinweis: Bevor Sie das Produkt zum ersten Mal verwenden, laden
Sie es bitte vollständig auf.
Hinweis: „******“ ist eine Reihe von Zufallszahlen und Buchstaben, das
Warten auf das Wifi-Signal und der Verbindungsaufbau mit WiFi kann ein
paar Sekunden in Anspruch nehmen. Haben Sie bitte etwas Geduld für
diesen Prozess.
14
Blaue LED WiFi-Anzeige
Rote LED Power-Anzeige
Schritt 4- Zurück zur APP
Hinweis:
Wenn das Endoskop und Ihr Smartgerät erfolgreich verbunden
wurden, können Sie die Echtzeitbilder des Endoskops über die
DEPSTECH-View APP empfangen und die blaue LED des
Endoskop-WLAN-Senders leuchtet.
15
16
Erläuterung über die App
Funktion zum Verstecken der Buttons:
Durchs Klicken darauf werden die Buttons versteckt / aktiviert
Umdrehen-Button: Durchs Klicken darauf werden die Bilder um 90°
umgedreht
Fotoaufnahme-Button: Durchs Klicken darauf wird ein Foto aufgenommen
Videoaufnahme-Button: Durchs Klicken darauf wird eine Videoaufnahme
gestartet / beendet
Galerie-Button: Durchs Klicken darauf werden die Fotos / Videos angezeigt
Einstellung-Button: Durchs Klicken darauf wird das Einstellungsmenü
angezeigt
Hinein zoomen / Heraus zoomen:
Ziehen Sie mit zwei Fingern das Bild auseinander, um das Echtzeit-Bild hinein zu
zoomen.
Schieben Sie mit zwei Fingern das Bild zusammen, um das Echtzeit-Bild heraus zu
zoomen.
2
3
4
5
1
2
3
4
5
1
17
Erläuterung über die App (Für WiFI SSID: DEPSTECH_******)
Auflösung: Darauf Klicken zum Auswählen von unterschiedlichen
Auflösungen.
WiFi-Einstellung: Darauf Klicken zur Änderung des WiFi SSID und
Passworts. Nach der Einstellung vergessen Sie bitte nicht, auf den
Reset-Button zu klicken.
Kanalwechsel: Wenn es in der Nähe zu viel 2.4g&5g WiFi-Sig-
nalstörungen gibt, klicken Sie darauf.
18
Gegen den Uhrzeigersinn drehen
Im Uhrzeigersinn drehen
Installationsanleitung für Zubehöre
Ladeanleitung
1. Schließen Sie das Gerät zum Aufladen an den DC 5V USB-Adapter an;
2. Während des Ladevorgangs leuchtet die grüne LED-Kontrollleuchte
dauerhaft.
3. Wenn das Gerät vollständig aufgeladen ist, erlischt die grüne
LED-Anzeige.
Betrachtungswinkel
Tiefenschärfe
Diameter
WiFi-Frequenz
Schutzklasse
67°±3°
3-8cm
8.5mm
DC 5V/2A
2.4G
5m (ohne jegliche Hindernisse)
IP67(gilt nur für die Kamera)
1920*1080, 1600*1200, 1280*720, 640*480
Sensor CMOS
WiFi-Reichweite
Spezifikation
Auflösungsoptionen der Kamera
Betriebsspannung und Betriebsstrom
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

DEPSTECH WF010 Manuale utente

Categoria
Cellulari
Tipo
Manuale utente