Asus P12R-M Manuale utente

Categoria
Schede madri server / workstation
Tipo
Manuale utente

Questo manuale è adatto anche per

Motherboard
P12R-M
Series
ii
E22759
Revised Edition V5
September 2023
Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
iii
Contents
Safety information ..................................................................................................... vii
P12R-M Series Specifications Summary.................................................................. ix
Chapter 1: Product Introduction
1.1 Welcome! ....................................................................................................1-2
1.2 Package contents ......................................................................................1-2
1.3 Serial number label .................................................................................... 1-3
1.4 Special features..........................................................................................1-3
1.4.1 Product highlights........................................................................1-3
1.4.2 Innovative ASUS features ........................................................... 1-5
Chapter 2: Hardware Information
2.1 Before you proceed ...................................................................................2-2
2.2 Motherboard overview ...............................................................................2-3
2.2.1 Placement direction.....................................................................2-3
2.2.2 Screw holes.................................................................................2-3
2.2.3 Motherboard layout ..................................................................... 2-5
2.2.4 Layout contents ........................................................................... 2-7
2.3 Central Processing Unit (CPU) .................................................................2-9
2.3.1 Installing the CPU ....................................................................... 2-9
2.3.2 Installing the CPU heatsink ....................................................... 2-12
2.3.3 Uninstalling the CPU heatsink and fan...................................... 2-13
2.3.4 Installing the CPU heatsink in rack ........................................... 2-14
2.4 System memory .......................................................................................2-15
2.4.1 Overview ................................................................................... 2-15
2.4.2 Memory configurations .............................................................. 2-15
2.4.3 Installing a DIMM ...................................................................... 2-16
2.4.4 Removing a DIMM .................................................................... 2-16
2.5 Expansion slots ........................................................................................2-17
2.5.1 Installing an expansion card......................................................2-17
2.5.2 Configuring an expansion card ................................................. 2-17
2.5.3 Interrupt assignments................................................................2-18
2.5.4 PCI Express x8 slot (x4 link) ..................................................... 2-19
2.5.5 PCI Express x16 slot (x16 link) ................................................. 2-19
2.5.6 Installing the Baseboard Management Card ............................. 2-20
2.5.7 Installing an M.2 module ........................................................... 2-21
2.5.8 (optional) Installing the PFR module ......................................... 2-22
2.6 Jumpers ....................................................................................................2-23
2.7 Onboard LEDs .......................................................................................... 2-29
iv
Contents
2.8 Connectors ...............................................................................................2-31
2.8.1 Rear panel connectors .............................................................. 2-31
2.8.2 Internal connectors....................................................................2-34
Chapter 3: Powering Up
3.1 Starting up for the first time ......................................................................3-2
3.2 Powering off the computer ........................................................................3-3
3.2.1 Using the OS shut down function ................................................ 3-3
3.2.2 Using the dual function power switch .......................................... 3-3
Chapter 4: BIOS Setup
4.1 Managing and updating your BIOS ..........................................................4-2
4.1.1 ASUS CrashFree BIOS 3 utility................................................... 4-2
4.1.2 ASUS EzFlash Utility................................................................... 4-3
4.1.3 BUPDATER utility ....................................................................... 4-4
4.2 BIOS setup program ..................................................................................4-6
4.2.1 BIOS menu screen ...................................................................... 4-7
4.2.2 Menu bar ..................................................................................... 4-7
4.2.3 Menu items..................................................................................4-8
4.2.4 Submenu items ........................................................................... 4-8
4.2.5 Navigation keys ........................................................................... 4-8
4.2.6 General help................................................................................4-8
4.2.7 Configuration fields ..................................................................... 4-8
4.2.8 Pop-up window............................................................................4-8
4.2.9 Scroll bar ..................................................................................... 4-8
4.3 Main menu ..................................................................................................4-9
4.3.1 System Language [English] ........................................................ 4-9
4.3.2 System Date [Day xx/xx/xxxx] ..................................................... 4-9
4.3.3 System Time [xx:xx:xx] ............................................................... 4-9
4.4 Advanced menu .......................................................................................4-10
4.4.1 CPU Configuration .................................................................... 4-11
4.4.2 Power & Performance ............................................................... 4-12
4.4.3 Server ME Configuration ........................................................... 4-15
4.4.4 System Event Log ..................................................................... 4-16
4.4.5 Trusted Computing.................................................................... 4-17
4.4.6 Redfish Host Interface Settings................................................. 4-18
4.4.7 Onboard LAN Configuration ...................................................... 4-18
4.4.8 Serial Port Console Redirection ................................................ 4-19
4.4.9 Intel TXT Information.................................................................4-22
v
Contents
4.4.10 SIO Configuration......................................................................4-22
4.4.11 PCI Subsystem Settings ........................................................... 4-23
4.4.12 USB Configuration .................................................................... 4-27
4.4.13 Network Stack Configuration..................................................... 4-28
4.4.14 CSM (Compatibility Support Module) ........................................ 4-29
4.4.15 NVMe Configuration .................................................................. 4-31
4.4.16 APM Configuration .................................................................... 4-31
4.4.17 Third-party UEFI driver configurations ...................................... 4-32
4.5 Chipset menu ...........................................................................................4-33
4.5.1 System Agent (SA) Configuration ............................................. 4-33
4.5.2 PCH Configuration .................................................................... 4-35
4.6 Security menu ..........................................................................................4-39
4.7 Boot menu ................................................................................................4-43
4.8 Monitor menu ...........................................................................................4-45
4.9 Tool menu ................................................................................................. 4-46
4.10 Event Logs menu .....................................................................................4-47
4.10.1 Change Smbios Event Log Settings ......................................... 4-48
4.10.2 View Smbios Event Log ............................................................ 4-49
4.11 Server Mgmt menu ...................................................................................4-50
4.11.1 System Event Log ..................................................................... 4-51
4.11.2 View FRU information ............................................................... 4-52
4.11.3 Bmc self test log ........................................................................ 4-52
4.11.4 BMC network configuration ....................................................... 4-53
4.11.5 View System Event Log ............................................................ 4-54
4.12 Exit menu .................................................................................................. 4-55
Chapter 5: RAID Configuration
5.1 Setting up RAID ..........................................................................................5-2
5.1.1 RAID definitions .......................................................................... 5-2
5.1.2 Installing hard disk drives ............................................................ 5-3
5.1.3 Setting the RAID item in BIOS .................................................... 5-3
5.2 Intel® Virtual Raid on CPU in BIOS ........................................................... 5-4
5.2.1 Creating a RAID set .................................................................... 5-5
5.2.2 Deleting a RAID set.....................................................................5-6
5.3 Intel® Rapid Storage Technology enterprise (Windows) ........................5-7
5.3.1 Creating a RAID set .................................................................... 5-8
vi
Contents
5.3.2 Changing a Volume Type..........................................................5-10
5.3.3 Deleting a volume ..................................................................... 5-11
5.3.4 Preferences ............................................................................... 5-12
Chapter 6: Driver Installation
6.1 RAID driver installation .............................................................................6-2
6.1.1 Creating a USB flash drive with RAID drive ................................ 6-2
6.1.2 Installing the RAID controller driver............................................. 6-2
6.2 Running the Support DVD .........................................................................6-5
Appendix
P12R-M Series block diagram ................................................................................ A-2
Q-Code table ............................................................................................................ A-3
Notices .................................................................................................................... A-5
Service and Support ............................................................................................... A-9
vii
Safety information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect
all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, make sure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service technician
or your retailer.
viii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl> + <Alt> + <Del>
Command
Means that you must type the command exactly as shown,
then supply the required item or value enclosed in brackets.
Example: At DOS prompt, type the command line:
format A:/S
ix
P12R-M P12R-M/10G-2T
Processor Support / System Bus
1 x Socket H5 (LGA 1200)
Intel® Xeon® E processor (up to 95W)
Intel® Pentium processor
Core Logic Intel® C252 Chipset
Form Factor Micro ATX, 9.6 in. x 9.6 in.
ASUS Features
Fan Speed Control
Rack Ready
(Rack and Pedestal
dual use)
ASUS Control Center
Memory
Total Slots 4 (2 Channels)
Voltage 1.2V
Capacity Maximum up to 128GB
Memory Type DDR4 3200/2933/2666 ECC UDIMM
Memory Size 32GB, 16GB, 8GB, 4GB
Expansion
Slots
(follow SSI
Location
number)
Total PCI/PCI-E Slots 4
Slot Location 1 -
Slot Location 2 -
Slot Location 3 -
Slot Location 4 PCI-E x8 slot, x4 Gen4 Link
Slot Location 5 -
Slot Location 6 PCI-E x16 slot, x16 Gen4 Link
Slot Location 7 -
Storage
SATA Controller
Intel® C252:
6 x SATA 6Gb/s ports
Intel® VROC (Windows & Linux)
(Support software RAID 0, 1, 10 & 5)
SAS Controller
Optional kits:
ASUS PIKE II 3008 8-port SAS 12Gb/s HBA card
ASUS PIKE II 3108 8-port SAS HW 12Gb/s RAID
card
Broadcom MegaRAID 9560-16i
Networking LAN 2 x Intel® I210-AT
1 x Mgmt LAN
1 x Intel® LOM X710-AT2
1 x Mgmt LAN
Graphic
VGA Aspeed AST2600 64MB
* VGA output from BMC
HDMI HDMI 1.4
* HDMI output from CPU
P12R-M Series Specifications Summary
(continued on the next page)
x
P12R-M P12R-M/10G-2T
Onboard I/O
Connectors
TPM Header 1
PSU Connector 24-pin ATX power connector
8-pin ATX 12V power connector
Management
Header Onboard header for optional management card
USB Connector/
Header
2 x USB 3.2 Gen 2 (rear),
1 x USB 3.2 Gen 2 (header, 2 ports),
1 x USB 2.0 (header, 2 ports)
Fan Header 6 x 4 pin headers
SMBus 1
Chassis Intruder 1
Front LAN LED 4
Serial Port Header 1
VGA Header 1
M.2 Connector 1
Rear I/O
Connectors
External USB Port 2 x USB 3.2 Gen 2 (rear)
VGA Port 1
RJ-45 2 x GbE LAN
1 x Mgmt LAN
2 x 10GbE LAN
1 x Mgmt LAN
Management
Solution
Software ASUS Control Center
Out of Band
Remote
Management
Optional ASMB10-iKVM for KVM-over-IP
Monitoring CPU Temperature
FAN RPM
Environment
Operation temperature:
10oC ~ 50oC (50oF ~ 122oF)
Non operation temperature:
-40oC ~ 70oC (-40oF ~ 158oF)
Non operation humidity:
20% ~ 90% (Non condensing)
Specifications are subject to change without notice.
1
Product Introduction
This chapter describes the motherboard features and the new
technologies it supports.
Chapter 1: Product Introduction
1-2 Chapter 1: Product Introduction
1.1 Welcome!
Thank you for buying an ASUS® P12R-M Series motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard and hardware devices on it, check the items in
your package with the list below.
1.2 Package contents
Check your motherboard package for the following items.
If any of the above items is damaged or missing, contact your retailer.
Items Standard Gift Box Pack Standard Bulk Pack
I/O Shield 11
Cables SATA 6G cable 3 --
COM port cable 1 --
Application CD Support DVD 1 1 pc per carton
Accessory Metal Plate for LGA1200 1 1
Packaging Qty. 1 pc per carton 10 pcs per carton
ASUS P12R-M Series 1-3
1.3 Serial number label
Before requesting support from the ASUS Technical Support team, you must take note of the
motherboard's serial number containing 12 characters xxSxxxxxxxxx shown as the figure
below. With the correct serial number of the product, ASUS Technical Support team members
can then offer a quicker and satisfying solution to your problems.
xxSxxxxxxxxx
Made
in
China
合格
P12R-M
xxSxxxxxxxxx
Made
in
China
合格
P12R-M/10G-2T
1.4 Special features
1.4.1 Product highlights
Latest processor technology
This motherboard supports the latest Intel® Xeon® Processor E-23xx / Pentium™ in LGA1200
package, which has memory and PCI Express controller integrated to support 2-channel (4
DIMMs) DDR4 memory and PCI Express 4.0 lanes. The Intel® Xeon® E-23xx have improve
CPU performance and integrated voltage regulators making it one of the most powerful and
energy efficient CPU in the world.
Integrated processor graphics support
This motherboard supports 1 digital display HDMI® with up to 4K resolution and integrated
graphics Support will cover basic functionality that matches Client’s level of features.
DMI Speed 3.0 x8
Improvement for a significant upgrade over traditional 3.0 x4.
Intel® Turbo Boost
Intel® Turbo Boost automatically allows the processor to run faster than the marked frequency
if the processor is operating below its power, current, and temperature specification
limits. This technology increases performance of both multi-threaded and single-threaded
workloads.
Intel® Hyper Threading
The thread-level parallelism on each processor makes more efficient use of the processor
resources, higher processing throughout and improved performance on today's multi-
threaded software.
1-4 Chapter 1: Product Introduction
Intel® EM64T
The motherboard supports Intel® processors with the Intel® EM64T (Extended Memory 64
Technology). The Intel® EM64T feature allows your computer to run on 64-bit operating
systems and access larger amounts of system memory for faster and more efficient
computing.
DDR4 memory support
The motherboard supports DDR4 memory that features faster clock frequencies and higher
data transfer rates of 3200 MT/s (million transfers per second). DDR4 offers a lower voltage
standard of 1.2V that reduces memory power demand and provides improved performance.
PCI Express 4.0
PCI Express® (PCIe+) 4.0 delivers 16 GT/s bandwidth, which is double the speed of PCIe
3.0, offering lower power consumption, better lane scalability and backwards compatibility.
P12R-M series are PCIe 4.0 ready to support a diverse array of graphics, storage and
networking – enabling flexible scalability for demanding or increasing workloads.
PCI Express 3.0
PCI Express 3.0 (PCIe 3.0) is the PCI Express bus standard that provides twice the
performance and speed of PCIe 2.0. It provides an optimal graphics performance,
unprecedented data speed, and seamless transition with its complete backward compatibility
to PCIe 1.0/2.0 devices.
Intel® I210AT LAN Solution
The motherboard comes with two Gigabit LAN controllers and ports which provide a total
solution for your networking needs. The onboard Intel® I210AT Gigabit LAN controllers use
the PCI Express interface and could achieve network throughput close to Gigabit bandwidth.
Intel® 10G LAN Solution
Dual Intel® 10G LAN offers increased data throughput and improved efficiency, making it ideal
for large file transfers and backup. Featuring dual onboard 10G LAN ported by the cutting-
edge Intel® LOM X710AT2 Ethernet Controller, P12R-M/10G-2T provides server-grade
connectivity and supports high-density, high-bandwidth, low-latency access-layer networks to
ensure faster transfers of large-size files used in data-intensive applications.
Enhanced Intel SpeedStep Technology (EIST)
The Enhanced Intel SpeedStep Technology (EIST) intelligently manages the CPU resources
by automatically adjusting the CPU voltage and core frequency depending on the CPU
loading and system speed or power requirement.
Serial ATA III technology
The motherboard supports the Serial ATA III 6 Gb/s technology through the Serial ATA
interface and Intel® C252 chipset. Get enhanced scalability, faster data retrieval, double the
bandwidth of current bus systems with up to 6Gbps data transfer rates.
USB 3.2 Gen 1 (5Gbps) / Gen 2 (10Gbps) technology
The motherboard implements the USB 3.2 Gen 1 / Gen 2 technology with data transfer
speeds of up to 5Gbps or 10Gbps, faster charging time for USB-chargeable devices,
optimized power efficiency, and backward compatibility with USB 2.0.
ASUS P12R-M Series 1-5
Temperature, fan, and voltage monitoring
The CPU temperature is monitored to prevent overheating and damage. The system fan
rotations per minute (RPM) is monitored for timely failure detection. The chip monitors the
voltage levels to ensure stable supply of current for critical components.
1.4.2 Innovative ASUS features
ASUS Fan Speed technology
The ASUS Fan Speed technology smartly adjusts the fan speeds according to the system
loading to ensure quiet, cool, and efficient operation.
1-6 Chapter 1: Product Introduction
2
Hardware Information
This chapter lists the hardware setup procedures that you have
to perform when installing system components. It includes
description of the jumpers and connectors on the motherboard.
Chapter 2: Hardware Information
2-2 Chapter 2: Hardware Information
2.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
Use a grounded wrist strap or touch a safely grounded object or a metal object, such
as the power supply case, before handling components to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
Before you install or remove any component, ensure that the power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause
severe damage to the motherboard, peripherals, and/or components.
ASUS P12R-M Series 2-3
2.2 Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits into it.
To optimize the motherboard features, we highly recommend that you install it in an ATX 2.2
compliant chassis.
2.2.1 Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
2.2.2 Screw holes
Place eight (8) screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
Ensure to unplug the chassis power cord before installing or removing the motherboard.
Failure to do so can cause you physical injury and damage motherboard components!
Place this side towards
the rear of the chassis
P12R-M
2-4 Chapter 2: Hardware Information
Place this side towards
the rear of the chassis
P12R-M/10G-2T
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148

Asus P12R-M Manuale utente

Categoria
Schede madri server / workstation
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue