Asus Prime Z390-P Manuale utente

Categoria
Schede madri server / workstation
Tipo
Manuale utente
Motherboard
PRIME Z390-P
ii
E15011
Revised Edition v3
November 2018
Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notication to the email address [email protected], stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
iii
Contents
Safety information ...................................................................................... iv
About this guide ......................................................................................... iv
Package contents ....................................................................................... vi
PRIME Z390-P specifications summary .................................................... vi
Chapter 1 Product introduction
1.1 Before you proceed ..................................................................... 1-1
1.2 Motherboard overview ................................................................. 1-1
1.3 Central Processing Unit (CPU) ................................................... 1-3
1.4 System memory ........................................................................... 1-7
1.5 Expansion slots ............................................................................ 1-9
1.6 Headers ....................................................................................... 1-10
1.7 Connectors ................................................................................. 1-13
1.8 Software support ........................................................................ 1-23
Chapter 2 BIOS information
2.1 Managing and updating your BIOS ............................................ 2-1
2.2 BIOS setup program .................................................................... 2-6
2.3 My Favorites ............................................................................... 2-16
2.4 Main menu .................................................................................. 2-18
2.5 Ai Tweaker menu ........................................................................ 2-20
2.6 Advanced menu ......................................................................... 2-28
2.7 Monitor menu ............................................................................. 2-37
2.8 Boot menu .................................................................................. 2-41
2.9 Tool menu ................................................................................... 2-46
2.10 Exit menu .................................................................................... 2-47
Appendices
Notices .......................................................................................................A-1
ASUS contact information .......................................................................A-5
iv
Safety information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
• Chapter1:Productintroduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
• Chapter2:BIOSinformation
This chapter discusses changing system settings through the BIOS Setup menus.
Detailed descriptions for the BIOS parameters are also provided.
v
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when
completing a task.
CAUTION: Information to prevent damage to the components when
completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
vi
PRIME Z390-P specifications summary
(continued on the next page)
Package contents
Check your motherboard package for the following items.
Motherboard
ASUS PRIME Z390-P motherboard
Cables
2 x SATA 6.0 Gb/s cables
Accessories
1 x I/O Shield
2 x M.2 screw packages
Application DVD Support DVD
Documentation User Guide
If any of the above items is damaged or missing, contact your retailer.
CPU
Intel
®
Socket 1151 for Intel
®
Core™ 9000 series, 8
th
Generation Core™ i7/ i5/ i3,
Pentium
®
and Celeron
®
processors
Supports 14nm CPU
Supports Intel
®
Turbo Boost Technology 2.0*
* The Intel
®
Turbo Boost Technology 2.0 support depends on the CPU types.
** Refer to www.asus.com for Intel
®
CPU support list.
Chipset
Intel
®
Z390 Chipset
Memory
4 x DIMM, max. 64GB DDR4 4266(O.C.)*/4133(O.C.)*/4000(O.C.)*/3866(O.C.)*/3
733(O.C.)*/3600(O.C.)*/3466(O.C.)*/3400(O.C.)*/3333(O.C.)*/3300(O.C.)*/3200
(O.C.)*/3000(O.C.)*/2800(O.C.)*/2666 /2400 /2133 MHz Non-ECC, Un-buffered
Memory**
Dual-channel memory architecture
Supports Intel
®
Extreme Memory Prole (XMP)
* The maximum memory frequency supported varies by processor.
** Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
Expansion
slots
1 x PCI Express 3.0/2.0 x16 slot (support x16, x8+x4+x4*)
1 x PCI Express 3.0/2.0 x16 slot (max. at x4 mode, compatible with PCIe x1, x2
and x4 devices)
4 x PCI Express 3.0/2.0 x1 slots
1 x M.2 Socket (Key E), supports type 2230 Wi-Fi/BT and Intel
®
CNVi (Integrated
Wi-Fi/BT) module**
* For 3 Intel
®
SSDs on CPU support, install a Hyper M.2 X16 card (sold separately) into
the PCIeX16_1 slot, and enable this card in BIOS.
** The Wi-Fi/BT module is purchased separately.
Multi-GPU
Support
Supports AMD CrossFireX™ Technology
Graphics
Integrated graphics processor - Intel
®
UHD Graphics support
Multi-VGA output support: HDMI, DisplayPort ports
- Supports HDMI 1.4b output with a maximum resolution of 4096 x 2160
@30Hz, 24bpp
- Supports DisplayPort* with max. resolution 4096 x 2304@60Hz
Supports Intel
®
InTru
TM
3D, Quick Sync Video, Intel
®
Clear Video HD Technology,
and Intel
®
Insider
TM
vii
PRIME Z390-P specifications summary
(continued on the next page)
Storage
Intel
®
CPU support with Intel
®
Rapid Storage Technology (RAID 0 & RAID 1)
- PCIEX16_1 slot supports up to 3 Intel
®
PCIe NVME SSDs via a Hyper M.2 X16
series Card*
Intel
®
Z390 Chipset with RAID 0, 1, 5, 10 and Intel
®
Rapid Storage Technology
support
- 1 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage devices support
(SATA mode & X4 PCIE mode)**
- 1 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage devices support
(SATA mode & X2 PCIE mode)
- 4 x SATA 6.0 Gb/s ports (gray)
- Intel
®
Optane™ Memory Ready
* Hyper M.2X16 series card is sold separately. Install a Hyper M.2 X16 series card and
enable this card under BIOS settings.
** When a device in SATA mode is installed on the M.2_1 socket, SATA_2 port cannot be
used.
LAN
Realtek
®
8111H Gigabit LAN controller supports ASUS LANGuard
Audio
Realtek
®
ALC887 8-channel* high denition audio CODEC
- LED-illuminated design: Brighten up your build with the gorgeous illuminated
audio trace path
- Audio Shielding: Ensures precision analog/digital separation and greatly
reduces multi-lateral interference
- Dedicated audio PCB layers: Separate layers for left and right channels to
guard the quality of the sensitive audio signals
- Premium Japanese audio capacitors: Provide warm, natural and immersive
sound with exceptional clarity and delity
- Supports jack-detection and front panel jack-retasking
* Use a chassis with HD audio module in the front panel to support an 8-channel audio
output.
USB
Intel
®
Z390 Chipset
- 2 x USB 3.1 Gen 2 ports up to 10Gbps at back panel (Type-A)
- 8 x USB 3.1 Gen 1 ports (4 ports @mid-board; 4 ports @back panel, blue,
Type A)
- 3 x USB 2.0/1.1 ports (3 ports @mid-board)
ASUS
unique
features
ASUS 5X PROTECTION III
- ASUS SafeSlot Core: Fortied PCIe with solid soldering
- ASUS LANGuard: Protects against LAN surges, lightning strikes and static-
electricity discharges
- ASUS Overvoltage Protection: World-class circuit-protecting power design
- ASUS Stainless-Steel Back I/O: 3X corrosion-resistance for greater durability!
- ASUS DIGI+ VRM
Superb Performance
OptiMem II
- Improved DDR4 stability
M.2 onboard
- The latest transfer technologies with up to 32Gb/s data transfer speeds
ASUS Fan Xpert 4
- Advanced fan and liquid controls for ultimate cooling and quietness
viii
PRIME Z390-P specifications summary
(continued on the next page)
ASUS
unique
features
ASUS EPU
- EPU
ASUS Exclusive Features
- ASUS Ai Charger
- ASUS AI Suite 3
EZ DIY
UEFI BIOS EZ Mode
- Featuring friendly graphics user interface
- ASUS O.C. Tuner
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 3
- PC Cleaner
Q-Design
- ASUS Q-DIMM
- ASUS Q-Slot
ASUS quiet
thermal
solution
Quiet Thermal Design
- ASUS ASUS Fan Xpert 4
- Stylish Fanless Design: PCH Heat-sink & 2*MOS Heat-sink
ASUS
Exclusive
Overclocking
Features
PrecisionTweaker2:
- vCore: Adjustable CPU Core voltage at 0.005V increment
- iGPU: Adjustable CPU Graphics voltage at 0.005V increment
- vCCIO: Adjustable Analog and Digital I/O voltage at 0.005V increment
- vCCSA: Adjustable CPU System Agent voltage at 0.1V increment
- vDRAM Bus: Adjustable DRAM Voltage at 0.005V increment
- vPCH: Adjustable PCH Core Voltage at 0.01V increment
SFS (Stepless Frequency Selection)
- BCLK/PCIE frequency tuning from 98MHz up to 538MHz at 0.1MHz increment
Overclocking Protection
- ASUS C.P.R.(CPU Parameter Recall)
Rear panel
I/O ports
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x DisplayPort
1 x HDMI port
1 x LAN (RJ45) port
2 x USB 3.1 Gen 2 Type A ports
4 x USB 3.1 Gen 1 Type A ports
3 x Audio jacks support 8-channel audio output*
* Use a chassis with HD audio module in the front panel to support a 8-channel audio
output.
ix
PRIME Z390-P specifications summary
Internal
connectors
2 x USB 3.1 Gen 1 connectors support additional 4 USB 3.1 Gen 1 ports (19-pin)
1 x USB 2.0 connectors support additional 2 USB ports (9-pin)
1 x USB 2.0 connectors support additional 1 USB ports (4-pin)
4 x SATA 6.0 Gb/s connectors (gray)
2 x M.2 Socket 3 (for M Key)
1 x M.2 Socket 3 (for E Key)
1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin (PWM mode)
CPU coolers control*
2 x 4-pin Chassis Fan connectors for 3-pin (DC mode) and 4-pin (PWM mode)
coolers control*
1 x AIO PUMP connector
1 x RGB Header
1 x MemOK! II Switch
1 x Front panel audio connector (AAFP)
1 x System panel connector
1 x S/PDIF out header
1 x 24-pin EATX Power connector
1 x 8-pin EATX 12V Power connector
1 x Clear CMOS jumper
1 x COM Header
* By default, the CPU/Chassis Q-Fan control setting is set to Auto mode, which detects
the CPU and chassis fans installed and changes the control mode automatically.
BIOS features
128 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.1, ACPI 6.1, Multi-
language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ Tuning Wizard,
F6 Qfan Control, F3 My Favorites, Last Modied log, F9 Search, F12 PrintScreen,
and ASUS DRAM SPD (Serial Presence Detect) memory information
Manageability
WOL by PME, PXE
Support DVD
Drivers
ASUS utilities
EZ Update
Anti-virus software (OEM version)
OS support
Windows
®
10 (64-bit)
Form factor
ATX form factor: 12.0 in. x 9.2 in. (30.5 cm x 23.4cm)
Specications are subject to change without notice.
x
ASUS PRIME Z390-P
1-1
Product introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplugthepowercordfromthewallsocketbeforetouchinganycomponent.
• Beforehandlingcomponents,useagroundedwriststraportouchasafelygrounded
objectorametalobject,suchasthepowersupplycase,toavoiddamagingthemdue
to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistaticpadorinthe
bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethattheATXpowersupplyis
switched off or the power cord is detached from the power supply. Failure to do so
maycauseseveredamagetothemotherboard,peripherals,orcomponents.
1.2 Motherboard overview
Beforeyouinstallthemotherboard,studythecongurationofyourchassistoensurethatthe
motherboardts.
Unplugthepowercordbeforeinstallingorremovingthemotherboard.Failuretodosocan
cause you physical injury and damage to motherboard components.
1.2.1 Placement direction
Wheninstallingthemotherboard,placeitintothechassisinthecorrectorientation.Theedge
with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2 Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Donotovertightenthescrews!Doingsocandamagethemotherboard.
1-2
Chapter 1: Product introduction
Place this side
towards the rear
of the chassis
1.2.3 Motherboard layout
PRIME Z390-P
ON
OFF
PRIME Z390-P
ON
OFF
DDR4 DIMM_B1 (64bit, 288-pin module)
DDR4 DIMM_B2* (64bit, 288-pin module)
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_A2* (64bit, 288-pin module)
DIGI+
EPU
AIO_PUMP
CPU_FAN
CHA_FAN2
CHA_FAN1
CLRTC
M.2_2(SOCKET3)
M.2_1(SOCKET3)
M.2_1(SOCKET3)
PANEL
AAFP
COM
EATX12V
LGA1151
EATXPWR
U31G1_78
U31G1_910
Intel
®
Z390
Realtek
®
8111H
Lithium Cell
CMOS Power
HDMI
U31G2_12
DP
AUDIO
Super
I/O
PCIEX1_1
2280 2260 2242
PCIE SATA IRST
X4
V
V
M.2_2(SOCKET3)
PCIE SATA IRST
X2
V
V
2280 2260 2242
PCIEX1_2
PCIEX1_3
PCIE_X1_4
PCIEX16_1
PCIEX16_2
USB1112
USB13
SPDIF_OUT
ALC
887
LAN_U31G1_56
KBMS
U31G1_34
LANGuard
23.4cm(9.2in)
30.5cm(12in)
SATA6G_1 SATA6G_2
SATA6G_3 SATA6G_4
128Mb
BIOS
M.2(WIFI)
2230
RGB_HEADER
MemOK!_II
Mem_LED
7
8
8
9
5
1
10
11
141517 16
1 432 2
13 7 12
6
ASUS PRIME Z390-P
1-3
1.2.4 Layout contents
1.3 Central Processing Unit (CPU)
ThismotherboardcomeswithasurfacemountLGA1151socketdesignedforIntel
®
Core™
9000series,8
th
GenerationCore™i7/i5/i3,Pentium
®
andCeleron
®
processors
Connectors/Jumpers/Slots/LED
Page
1.
ATXpowerconnectors(24-pinEATXPWR,8-pinEATX12V)
1-18
2.
CPU,AIOpump,andchassisfanconnectors(4-pinCPU_FAN,4-pinAIO_
PUMP,and4-pinCHA_FAN1/2)
1-21
3.
Intel
®
LGA1151CPUsocket
1-3
4. DDR4DIMMslots 1-7
5. MemOK_IISwitch 1-12
6. MemOK_IILED 1-13
7. USB3.1Gen1connectors(20-1pinU31G1_78,910) 1-17
8. M.2Socket3[M.2_1(Socket3)] 1-20
9. M.2Socket3[M.2(WIFI)] 1-19
10. ClearRTCRAM(2-pinCLRTC) 1-10
11. Systempanelconnector(20-5pinPANEL) 1-22
12. Intel
®
Z390SATA6.0Gb/sconnectors(7-pinSATA6G_1-4) 1-19
13. USB2.0connectors(10-1pinUSB1112,USB13) 1-16
14. RGBheader(4-pinRGB_HEADER) 1-11
15. Serialportconnectors(10-1pinCOM) 1-15
16. Digitalaudioconnector(4-1pinSPDIF_OUT) 1-17
17. Frontpanelaudioconnector(10-1pinAAFP) 1-16
ON
OFF
PRIME Z390-P CPU socket LGA1151
UnplugallpowercablesbeforeinstallingtheCPU.
1-4
Chapter 1: Product introduction
1.3.1 Installing the CPU
1
2
3
A
B
• EnsurethatyouinstallthecorrectCPUdesignedfortheLGA1151socketonly.DO
NOTinstallaCPUdesignedforLGA1150,LGA1155andLGA1156socketsonthe
LGA1151socket.
• Uponpurchaseofthemotherboard,ensurethatthePnPcapisonthesocketand
thesocketcontactsarenotbent.ContactyourretailerimmediatelyifthePnPcap
ismissing,orifyouseeanydamagetothePnPcap/socketcontacts/motherboard
components.
• Keepthecapafterinstallingthemotherboard.ASUSwillprocessReturnMerchandise
Authorization(RMA)requestsonlyifthemotherboardcomeswiththecaponthe
LGA1151socket.
• Theproductwarrantydoesnotcoverdamagetothesocketcontactsresultingfrom
incorrectCPUinstallation/removal,ormisplacement/loss/incorrectremovalofthePnP
cap.
ASUS PRIME Z390-P
1-5
A
B
C
5
4
1.3.2 CPU heatsink and fan assembly installation
ApplytheThermalInterfaceMaterial
totheCPUheatsinkandCPU
before you install the heatsink and
fan if necessary.
1-6
Chapter 1: Product introduction
3 4
A
B
B
A
To uninstall the CPU heatsink and fan assembly
2
1
To install the CPU heatsink and fan assembly
2
B
A
A
B
1
ASUS PRIME Z390-P
1-7
1.4 System memory
1.4.1 Overview
ThismotherboardcomeswithfourDoubleDataRate4(DDR4)DualInlineMemoryModule
(DIMM)sockets.ADDR4moduleisnotcheddifferentlyfromaDDR,DDR2,orDDR3module.
DONOTinstallaDDR,DDR2,orDDR3memorymoduletotheDDR4slot.
AccordingtoIntel
®
CPUspec,DIMMvoltagebelow1.35Visrecommendedtoprotectthe
CPU.
1.4.2 Memory configurations
Youmayinstall2GB,4GB,8GB,and16GBunbufferednon-ECCDDR4DIMMsintothe
DIMMsockets.Youcanrefertotherecommendedmemorypopulationbelow.
Recommended memory configurations
ON
OFF
PRIME Z390-P 288-pin DDR4 DIMM sockets
DIMM_B1
DIMM_B2*
DIMM_A1
DIMM_A2*
• YoumayinstallvaryingmemorysizesinChannelAandChannelB.Thesystemmaps
thetotalsizeofthelower-sizedchannelforthedual-channelconguration.Anyexcess
memoryfromthehigher-sizedchannelisthenmappedforsingle-channeloperation.
• AccordingtoIntel
®
CPUspec,DIMMvoltagebelow1.35Visrecommendedtoprotect
theCPU.
• WhenusingoneDIMM,installitintoslotA2forbettermemorycompatibilityand
performance
1-8
Chapter 1: Product introduction
• ThedefaultmemoryoperationfrequencyisdependentonitsSerialPresenceDetect
(SPD),whichisthestandardwayofaccessinginformationfromamemorymodule.
Underthedefaultstate,somememorymodulesforoverclockingmayoperateata
lowerfrequencythanthevendor-markedvalue.Tooperateatthevendor-marked
oratahigherfrequency,refertosection2.5 Ai Tweaker menu for manual memory
frequencyadjustment.
• AlwaysinstalltheDIMMSwiththesameCASLatency.Foranoptimumcompatibility,
werecommendthatyouinstallmemorymodulesofthesameversionordatacode
(D/C)fromthesamevendor.Checkwiththevendortogetthecorrectmemory
modules.
• Forsystemstability,useamoreefcientmemorycoolingsystemtosupportafull
memoryload(4DIMMs)oroverclockingcondition.
VisittheASUSwebsiteatwww.asus.comforthelatestQVL.
1.4.3 Installing a DIMM
1
2
To remove a DIMM
B
A
B
A
A
ASUS PRIME Z390-P
1-9
1.5 Expansion slots
Inthefuture,youmayneedtoinstallexpansioncards.Thefollowingsub-sectionsdescribe
the slots and the expansion cards that they support.
Unplugthepowercordbeforeaddingorremovingexpansioncards.Failuretodosomay
cause you physical injury and damage motherboard components.
1.5.1 Installing an expansion card
To install an expansion card:
1. Beforeinstallingtheexpansioncard,readthedocumentationthatcamewithitand
make the necessary hardware settings for the card.
2. Removethesystemunitcover(ifyourmotherboardisalreadyinstalledinachassis).
3. Removethebracketoppositetheslotthatyouintendtouse.Keepthescrewforlater
use.
4. Alignthecardconnectorwiththeslotandpressrmlyuntilthecardiscompletely
seated on the slot.
5. Securethecardtothechassiswiththescrewyouremovedearlier.
6. Replacethesystemcover.
1.5.2 Configuring an expansion card
Afterinstallingtheexpansioncard,congureitbyadjustingthesoftwaresettings.
1. TurnonthesystemandchangethenecessaryBIOSsettings,ifany.SeeChapter2for
informationonBIOSsetup.
2. AssignanIRQtothecard.
3. Installthesoftwaredriversfortheexpansioncard.
WhenusingPCIcardsonsharedslots,ensurethatthedriverssupport“ShareIRQ”orthat
thecardsdonotneedIRQassignments.Otherwise,conictswillarisebetweenthetwoPCI
groups,makingthesystemunstableandthecardinoperable.
1.5.3 PCI Express 3.0 x1 slots
ThismotherboardsupportsPCIExpress3.0x1networkcards,SCSIcards,andothercards
thatcomplywiththePCIExpressspecications.
1.5.4 PCI Express 3.0 x16 slots
ThismotherboardhastwoPCIExpress3.0x16slots(x16+x4mode)thatsupportPCI
Express3.0x16graphiccardscomplyingwiththePCIExpressspecications.
1-10
Chapter 1: Product introduction
• InsingleVGAcardmode,usethePCIe3.0x16_1slot(gray)foraPCIExpressx16
graphics card to get better performance.
• WerecommendthatyouprovidesufcientpowerwhenrunningCrossFireX™mode.
• ConnectachassisfantothemotherboardconnectorlabeledCHA_FAN1/2when
usingmultiplegraphicscardsforbetterthermalenvironment.
• HyperM.2X16cardispurchasedseparately.
• EnabletheHyperM.2X16cardunderBIOSsettings.
VGA configuration
PCI Express operating mode
PCIe 3.0 x16_1 (gray)
PCIe 3.0 x16_2 (black,
x4 mode)
Single VGA/PCIe card
x16(Recommendedforsingle
VGAcard)
N/A
Dual VGA/PCIe cards
x16 x4
Hyper M.2 X16 card
configuration
PCI Express 3.0 operating mode
PCIe 3.0 x16_1 (gray) PCIe 3.0 x16_2 (black)
3 Intel
®
SSDs on CPU support x8+x4+x4 N/A
1.6 Headers
1. Clear RTC RAM (2-pin CLRTC)
ThisheaderallowsyoutocleartheRealTimeClock(RTC)RAMinCMOS.Youcan
cleartheCMOSmemoryofdate,time,andsystemsetupparametersbyerasingthe
CMOSRTCRAMdata.TheonboardbuttoncellbatterypowerstheRAMdatain
CMOS,whichincludesystemsetupinformationsuchassystempasswords.
ON
OFF
CLRTC
+3V_BAT
GND
PIN 1
PRIME Z390-P Clear RTC RAM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Asus Prime Z390-P Manuale utente

Categoria
Schede madri server / workstation
Tipo
Manuale utente

in altre lingue