Setup Guide_______________
Manuel de configuration __
Guía de configuración _____
Installationsanleitung _____
Guida di configurazione ___
C:\Users\kazuyuki-handa\Desktop\Condor_SG\21_SYQ\5038072211\5038072211VPLXW7000SYQ\01COV-
VPLXW7000SYQ\01GB01COV.fm
masterpage: Cover
VPL-XW7000
5-038-072-21(1)
Video Projector
5-038-072-21(1)
© 2022 Sony Corporation
VPL-XW7000
masterpage: cover4.print
5-038-072-21(1)
VPL-XW7000
Printed in China
GB 2
This Setup Guide explains the installation and basic operations for projecting pictures.
Before operating the unit, please read this manual thoroughly and retain it for future reference.
Refer to “About Indicators” as necessary.
For details on the operations, refer to the Help Guide (Web operating instructions).
About This Manual
Preparing ....................................................................Page 9
Installing the Unit ..................................................... Page 10
Connecting the Unit .................................................. Page 12
Projecting.................................................................. Page 13
About Indicators........................................................................................Page 14
Dimensions................................................................................................Page 15
Step 1
Step 2
Step 3
Step 4
Manuals supplied
Setup Guide (this document)
Explains the installation and basic operations for projecting pictures.
Help Guide (Web operating instructions)
Explains the features of the unit and how to use in detail. You can view the Help
Guide on a smartphone or computer.
https://rd1.sony.net/help/vpl/xw5000/en/
3 GB
When using the product, do not use it for
purposes other than those described in the
instruction manual.
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
WARNING
When installing the unit, incorporate a readily
accessible disconnect device in the fixed wiring, or
connect the power plug to an easily accessible
socket-outlet near the unit. If a fault should occur
during operation of the unit, operate the
disconnect device to switch the power supply off,
or disconnect the power plug.
CAUTION
For safety, do not connect the connector for
peripheral device wiring that might have excessive
voltage to the following port:
LAN
WARNING
1. Use the approved Power Cord (2-core mains
lead) / Appliance Connector / Plug that
conforms to the safety regulations of each
country/region if applicable.
2. Use the Power Cord (2-core mains lead) /
Appliance Connector / Plug conforming to the
proper ratings (Voltage, Ampere).
If you have questions on the use of the above
Power Cord / Appliance Connector / Plug, please
consult a qualified service personnel.
IMPORTANT
The nameplate is located in the following location
on the unit.
Side
CAUTION
– Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer.
– When you dispose of the battery or the product,
you must obey the law in the corresponding area
or country. Do not dispose of the battery or the
product in a fire or a hot oven, or mechanically
crush or cut the battery. It may explode or cause
a fire. Do not subject the battery to extremely
low air pressure that may result in an explosion
or the leakage of flammable liquid or gas.
– Do not place the battery in a high temperature
place, such as under direct sunlight or near fire.
It may ignite, explode, or cause a fire. Do not
immerse or wet the battery in water or seawater.
This may cause an electric shock.
CAUTION
The following size and number of batteries are
required for the remote control.
Size: AA (R6)
Number of battery(ies): Two pieces
To avoid risk of explosion, use only the following
type of battery.
Manganese batteries
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
For kundene i Norge
Dette utstyret kan kobles til et IT-
strømfordelingssystem.
WARNING: Do not look into the lens while in use.
Caution
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Caution
The use of optical instruments with this product
will increase eye hazard.
IEC 60825-1:2014
CLASS 1 LASER PRODUCT
As with any bright light source,
do not stare into the beam, RG2
IEC 62471-5:2015.
English
GB 4
För kunderna i Sverige
VARNING: Titta aldrig in i projektorns lins medan
den används.
Försiktighet!
Användandet av kontroller eller justeringar eller
utförandet av andra procedurer än de som
specificeras häri kan resultera i exponering av
farlig strålning.
Försiktighet!
Användandet av optiska instrument med denna
produkt ökar risk för ögonskada.
Location information of the labels
Light source specifications
5.2 W laser diodes × 24
Wavelength: 450 - 460 nm
Beam divergence angle from lens of this unit
Zoom maximum: α = 39.9°
Zoom minimum: α = 25.5°
Do not place any object in front of the lens that
may block the light during projection. Heat from
the light may damage the object.
IEC 60825-1:2014
LASERPRODUKT AV KLASS 1
Precis som med alla starka
ljuskällor bör man inte titta
direkt i strålen, RG2 IEC 62471-
5:2015.
RG2 CAUTION PICTOGRAM
CLASS 1 LABEL
Laser emission port
5 GB
Precautions
On safety
Check that the operating voltage of your unit is
identical with the voltage of your local power
supply.
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it further.
Unplug the unit from the wall outlet if it is not to
be used for several days.
To disconnect the cord, pull it out by the plug.
Never pull the cord itself.
The wall outlet should be near the unit and
easily accessible.
The unit is not disconnected to the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Do not look into the lens while in use.
Do not place your hand or objects near the
ventilation holes. The air coming out is hot.
On preventing internal heat build-up
After you turn off the power with the / (On/
Standby) button, do not disconnect the unit from
the wall outlet while the cooling fan is still running.
Caution
This unit is equipped with ventilation holes
(intake/exhaust). Do not block or place anything
near these holes, or internal heat build-up may
occur, causing picture degradation or damage to
the unit.
On repacking
Save the original shipping carton and packing
material; they will come in handy if you ever have
to ship your unit. For maximum protection, repack
your unit as it was originally packed at the factory.
On watching 3D video images
Safety precautions
If you observe flickering or flashing, turn off the
lighting in the room.
Not for use by children without proper adult
supervision.
For the customers in the U.S.A.
SONY LIMITED WARRANTY - Please visit http://
www.sony.com/psa/warranty for important
information and complete terms and conditions
of Sony’s limited warranty applicable to this
product.
For the customers in Canada
SONY LIMITED WARRANTY - Please visit http://
www.sonybiz.ca/pro/lang/en/ca/article/
resources-warranty for important information
and complete terms and conditions of Sony’s
limited warranty applicable to this product.
For the customers in Europe
Sony Professional Solutions Europe - Standard
Warranty and Exceptions on Standard Warranty.
Please visit https://pro.sony/support-services/
primesupport/support-professional-solutions-
europe-standard-product-warranty for
important information and complete terms and
conditions.
For the customers in Korea
SONY LIMITED WARRANTY - Please visit http://
bpeng.sony.co.kr/handler/BPAS-Start for
important information and complete terms and
conditions of Sony’s limited warranty applicable
to this product.
GB 6
On inspection of light source related parts
Since the unit uses a laser, when adjusting or
inspecting the light source related parts, particular
attention and a safe environment are necessary.
Be sure to consult with qualified Sony personnel
(charged).
Note on leaving unused for long periods
If the unit is not used for a long period of time,
malfunction or a drop in performance can occur.
To avoid this, periodically turn on the power and
operate the unit.
On LCD Projector
The LCD projector is manufactured using high-
precision technology. You may, however, see tiny
black points and/or bright points (red, blue, or
green) that continuously appear on the LCD
projector. This is a normal result of the
manufacturing process and does not indicate a
malfunction.
Also, when you use multiple LCD projectors to
project onto a screen, even if they are of the same
model, the color reproduction among projectors
may vary, since color balance may be set
differently from one projector to the next.
On condensation
If the room temperature where the projector is
installed changes rapidly, or if the projector is
moved suddenly from a cold to a warm place,
condensation in the projector may occur. As the
condensation may cause malfunction, be careful
in adjusting temperature settings of the air
conditioner. If condensation occurs, leave the
projector turned on for about two hours before
use.
Notes on security
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
Depending on the operating environment,
unauthorized third parties on the network may
be able to access the unit. When connecting the
unit to the network, be sure to confirm that the
network is protected securely.
From a safety standpoint, when using the unit
connected with the network, it is strongly
recommended to access the Control window via
a Web browser and change the access limitation
settings from the factory preset values.
Also, it is recommended that you set a password
with a sufficiently long character string that is
hard to guess by others, and that you store it
safely.
Do not browse any other website in the Web
browser while making settings or after making
settings. Since the login status remains in the
Web browser, close the Web browser when you
complete the settings to prevent unauthorized
third parties from using the unit or harmful
programs from running.
When connecting this product to a network,
connect via a system that provides a protection
function, such as a router or firewall. If
connected without such protection, security
issues may occur.
Do not place this product close to medical devices
This product (including accessories) has magnet(s)
which may interfere with pacemakers,
programmable shunt valves for hydrocephalus
treatment, or other medical devices. Do not place
this product close to persons who use such
medical devices. Consult your doctor before using
this product if you use any such medical device.
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM THE USE OF THIS
UNIT FOR PURPOSES OTHER THAN GENERAL
HOME USE, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY.
7 GB
Notes on Installation and
Usage
Do not place the unit in the following situations,
which may cause malfunction or damage to the
unit.
Near walls
To maintain the performance and reliability of the
unit, leave space between walls and the unit as
illustrated.
Note that the wall on the ventilation holes side
may become hot.
Air from air conditioners or the ventilation holes of
this unit or other devices, may cause oscillation on
the screen. Be sure not to install this unit in the
area where the air from air conditioners or the
ventilation holes of these devices reach to the
front side of this unit.
Poorly ventilated location
Leave space of more than 30 cm (11 7/8 inches)
around the unit.
Hot and humid
Locations subject to direct cool or warm air from
an air-conditioner
Installing the unit in such a location may cause a
malfunction of the unit due to moisture
condensation or rise in temperature.
Near a heat or smoke sensor
Malfunction of the sensor may occur.
Very dusty and extremely smoky locations
Do not do any of the following while using the
unit.
Tilting front/rear and left/right
Avoid using the unit tilted at an angle, as shown in
the following illustrations.
Do not install the unit anywhere other than on a
level surface or on the ceiling. Installing the unit in
such a location may result in uneven color
uniformity.
Unsuitable installation
30 cm
(11 7/8 inches)
30 cm
(11 7/8 inches)
5 cm (2 inches)
15 cm (6 inches)
30 cm
(11 7/8 inches)
30 cm
(11 7/8 inches)
Unsuitable Conditions
GB 8
If the unit is tilted up or down, the image on the
screen may be trapezoidal. Position the unit so
that the lens is parallel to the screen.
When installing the unit at high altitudes
When using the unit in a location at an altitude of
1,000 m (approx. 3,280 feet) or higher,
appropriately set “High Altitude Mode” in the
Setup menu. Failing to do so could have
adverse effects, such as reducing the reliability of
certain components.
Never mount the projector on the ceiling or
move it by yourself. Be sure to consult with
qualified Sony personnel (charged).
When installing the unit on a ceiling, be sure to
use a safety wire, etc., to prevent the unit from
falling. Entrust the installation to an experienced
contractor or installer.
For dealers
Be sure to secure the cabinet cover firmly when
installing to the ceiling firmly.
License Notice
Refer to “Notice on the Software” in the Help
Guide and read the contents of the license.
Safety precautions for installing the unit on
a ceiling
15° or more
15° or
more
10° or
more
10° or
more
15° or
more
9 GB
Preparing
Check the carton to make sure it contains the
following items:
Remote control RM-PJ24 (1)
Size AA (R6) batteries (2)
Lens cap (1)
When you purchase the projector, a lens cap is
on the lens.
AC power cord (1)
Setup Guide (this manual) (1)
Caution when handling the remote control
Handle the remote control with care. Do not drop
it, and do not step on or spill liquids on it.
Do not place the remote control in a location
near a heat source, a place subject to direct
sunlight, or a damp room.
Remove the lens cap before you use the projector.
Notes on the lens cap
When removing the lens cap
When removing the lens cap, hold the parts other
than the catches and pull it toward you. If you pull
while holding the catches, the lens may be
damaged.
When attaching the lens cap
When attaching the lens cap, be sure to hook the
catches of the lens cap on the notches of the lens
to prevent it from falling out.
The positions of the notches on the lens may differ from
the ones shown in the figure.
Preparing
Step 1
Checking the Supplied Accessories
Inserting the Batteries into the Remote
Control
Insert the batteries side first.
Push and slide to open.
Removing the Lens Cap
Note
Catches
Notch
Catch
GB 10 Installing the Unit
1Position the unit so that the lens is parallel to
the screen.
2After connecting the AC power cord to the
unit, plug the AC power cord into a wall outlet.
After connecting the AC power cord to the unit, the
ON/STANDBY indicator may blink in orange.
You may not be able to control the unit while the
indicator is blinking, but this is not a malfunction. Wait
until it stops blinking and remains lit in red.
3Press the / (On/Standby) button to turn on
the unit.
4Project an image on the screen, then adjust
the focus, size, and position.
Adjust the focus.
Press the LENS ADJUSTMENT (FOCUS) button
to display the Lens Focus adjustment window
(test pattern). Then adjust the focus of the
picture by pressing the /// button.
Adjust the picture size.
Press the LENS ADJUSTMENT (ZOOM) button to
display the Lens Zoom adjustment window
(test pattern). Then adjust the size of the
picture by pressing the /// button.
Adjust the picture position.
Press the LENS ADJUSTMENT (SHIFT) button to
display the Lens Shift adjustment window
(test pattern). Then adjust to the proper
position of the picture by pressing the //
/ button.
Do not touch the lens when you adjust the image position.
Your fingers may be pinched when the lens extends/
retracts.
To adjust the tilt of the installation surface
If the unit is installed on an uneven surface, use
the front feet (adjustable) to keep the unit level.
Note that if the unit is tilted up or down, the projected
image will be distorted in a trapezoidal shape.
Be careful not to pinch your fingers when rotating the
front feet (adjustable).
Installing the Unit
Step 2
Note
Rear of the unit
ON/STANDBY
Front of the unit
Lights in red.
ON/STANDBY
Front of the unit
The ON/STANDBY indicator flashes
in green, then it lights in green.
Note
Notes
Turn to adjust.
Front feet (adjustable)
11 GB
Installing the Unit
Lens adjustment window (test pattern)
The dashed lines show the angle of view of each aspect
ratio.
4:3
1.85:12.35:1
For more information, refer to “Installation and
Connections” in the Help Guide.
GB 12 Connecting the Unit
When making connections, be sure to do the following:
Turn off all devices before making any connections.
Use the proper cables for each connection.
Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a
malfunction. When unplugging a cable, be sure to grip the plug, not the cable itself.
For more information, refer also to the instruction manual of the device to be connected.
Connecting the Unit
When you monitor and control the projector via the network, access the Setup page of the projector
(refer to “Using Network Features” in the Help Guide) via a Web browser and enable the desired control
protocol.
Step 3
HDMI cable (not supplied)
Right side of the unit
AV amplifier Speakers
Computer
Equipment with HDMI
output connectors
to HDMI output
: Video signal flow Use a Premium High Speed HDMI cable on which the cable type logo is
specified.
to HDMI input
For more information, refer to “Installation and
Connections” in the Help Guide.
13 GB
Projecting
1Turn on both the unit and the device
connected to the unit.
2Press INPUT to display the input palette on the
screen.
3Select the device from which you want to
display images.
Press INPUT repeatedly or press //
(enter) to select the device from which to
project.
1Press the / (On/Standby) button.
The message “POWER OFF?” appears.
2Press the / (On/Standby) button again
before the message disappears.
The ON/STANDBY indicator flashes in green
and the fan continues to run to reduce the
internal heat.
The fan stops and the ON/STANDBY indicator
changes from flashing green to remaining red.
The power is turned off completely, and you can
disconnect the AC power cord.
Never disconnect the AC power cord while the indicator is
flashing.
Tip
You can turn off the unit by holding the / (On/Standby)
button for about 1 second, instead of performing the above
steps.
Press one of the CALIBRATED PRESET buttons.
Projecting
Step 4
Projecting the Picture
Turning Off the Power
Note
Selecting the Picture Viewing Mode
Setting items Description
CINEMA FILM 1
(Cinema Film 1)
Image quality suited for reproducing
the wide dynamic and clear images
typical of master positive film.
CINEMA FILM 2
(Cinema Film 2)
Image quality suited for reproducing
the rich tone and color typical of a
movie theater, based on “Cinema Film
1.”
REF (Reference) Image quality suited for reproducing
the original image quality faithfully, or
to enjoy the image quality without
any adjustment.
TV (TV) Image quality suited for watching TV
programs, sports, concerts, and other
video images.
PHOTO (Photo) Image quality suited for viewing still
images taken with a digital camera
and other devices.
GAME (Game) Image quality suited for gaming, with
well-modulated colors and fast
response.
BRT CINE
(Bright Cinema)
Image quality suited for watching
movies in a bright room.
BRT TV
(Bright TV)
Image quality suited for watching TV
programs, sports, concerts, and other
video images in a bright room.
USER (User) You can set and adjust the image
quality to suit your taste, then you can
save the setting. The default setting is
the same as “Reference.”
IMAX Enhanced Image quality suited for watching
IMAX Enhanced contents.
Press the MENU button and select
from “Calib. Preset” in the Picture
menu.
CALIBRATED PRESET buttons
For more information, refer to “Projecting” in the
Help Guide.
GB 14 About Indicators
About Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector.
If there is any problem or an error message appears on the screen, refer to “Error Handling” in the Help
Guide.
If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel.
If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the / (On/
Standby) button on the remote control or control panel of the unit.
If the symptom is shown again, consult with qualified Sony personnel.
Flashing/Lighting indicators The number of
flashes
Cause and Remedy
Three times The unit does not light properly due to an abnormality of the light
source and light source power. Turn off, then turn on the power after a
while.
If the symptom persists, consult with qualified Sony personnel.
Twice The internal temperature is unusually high. Check to ensure that
nothing is blocking the ventilation holes and the unit is not being used
at high altitudes.
Three times The fan is broken. Consult with qualified Sony personnel.
Note
ON/STANDBY
WARNING
WARNING
indicator
ON/STANDBY
indicator
ON/STANDBY
WARNING
(Flashes in red)(Lights in red)
ON/STANDBY
WARNING
Both indicators flash
(Flashes in red) (Flashes in red)
If there is any problem or an error message
appears on the screen, refer to “Error Handling” in
the Help Guide.
15 GB
Dimensions
Dimensions
Front
Unit: mm (inches)
Bottom
Unit: mm (inches)
460 (18
1
/
8
)
111
(4
3
/
8
)
210.1
(8
9
/
32
)
5
(
3
/
16
)
Center of the lens
260 (10 1/4)
89.5
(3 17/32)
73.5
(2 29/32)
8 (5/16)
68
(2 11/16)
424.8 (16 23/32)
516.2 (20 5/16)
146.8
(5 25/32)
150.6
(5 15/16)
24.1 to 17 *
(15/16 to 21/32)
Holes for ceiling mount
(M5, Depth 8 (5/16))
Front of the cabinet
* Varies depending on how focus is adjusted.
GB 16 Dimensions
Holes for the ceiling mount
Use the screws with a length of 6.4 mm (1/4 inches, minimum) to 8.0 mm (5/16 inches, maximum) for the ceiling mount.
Recommended tightening torque (tension when turning a screw towards the direction of rotation): 1.4 ± 0.2 N-m
Note
Unit
Insert nut (M5)
Screw hole
The minimum
length of screw
The maximum
length of screw
17 GB
FR 18
Le Manuel de configuration décrit l’installation et les procédures de base de projection des images.
Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour future référence.
Reportez-vous à la section « À propos des indicateurs », le cas échéant.
Pour plus d’informations sur l’utilisation, reportez-vous au Guide d’aide (Mode d’emploi en ligne).
À propos de ce manuel
Préparation ...............................................................Page 25
Installation de l’appareil ..........................................Page 26
Raccordement de l’appareil......................................Page 28
Projection..................................................................Page 29
À propos des indicateurs...........................................................................Page 31
Dimensions............................................................................................... Page 32
Étape 1
Étape 2
Étape 3
Étape 4
Manuels fournis
Manuel de configuration (ce document)
Décrit l’installation et les procédures de base de projection des images.
Guide d’aide (Mode d’emploi en ligne)
Décrit les fonctionnalités de l’appareil et leur utilisation détaillée. Vous pouvez
afficher le Guide d’aide sur un smartphone ou un ordinateur.
https://rd1.sony.net/help/vpl/xw5000/fr/
19 FR
N’utilisez pas ce produit à des fins autres que
celles décrites dans le manuel d’instructions.
AVERTISSEMENT
Afin de réduire les risques d’incendie ou
d’électrocution, ne pas exposer cet appareil à la
pluie ou à l’humidité.
Afin d’écarter tout risque d’électrocution, garder
le coffret fermé. Ne confier l’entretien de
l’appareil qu’à un personnel qualifié.
AVERTISSEMENT
Lors de l’installation de l’appareil, incorporer un
dispositif de coupure dans le câblage fixe ou
brancher la fiche d’alimentation dans une prise
murale facilement accessible proche de l’appareil.
En cas de problème lors du fonctionnement de
l’appareil, enclencher le dispositif de coupure
d’alimentation ou débrancher la fiche
d’alimentation.
ATTENTION
Par mesure de sécurité, ne raccordez pas le
connecteur pour le câblage de périphériques
pouvant avoir une tension excessive au port
suivant :
LAN
AVERTISSEMENT
1. Utilisez un cordon d’alimentation (câble secteur
à 2 fils)/fiche femelle/fiche mâle conformes à la
réglementation de sécurité locale/régionale
applicable.
2. Utilisez un cordon d’alimentation (câble secteur
à 2 fils)/fiche femelle/fiche mâle avec des
caractéristiques nominales (tension, ampérage)
appropriées.
Pour toute question sur l’utilisation du cordon
d’alimentation/fiche femelle/fiche mâle ci-dessus,
consultez un technicien du service après-vente
qualifié.
IMPORTANT
La plaque signalétique se situe à l’endroit suivant
sur l’appareil.
Côté
ATTENTION
– Il y a danger d’explosion s’il y a remplacement
incorrect de la batterie. Remplacer uniquement
avec une batterie du même type ou d’un type
équivalent recommandé par le constructeur.
– Lors de la mise au rebut de la batterie ou du
produit, vous devez respecter la loi de la région
ou du pays concerné. Ne mettez pas la batterie
ou le produit au rebut dans un feu ou un four
chaud, ou n’écrasez pas mécaniquement la
batterie et ne la coupez pas. Elle risque
d’exploser ou de provoquer un incendie. Ne
soumettez pas la batterie à une pression d’air
extrêmement basse qui pourrait entraîner une
explosion ou une fuite de liquide ou de gaz
inflammable.
– Ne placez pas la batterie dans un endroit à
température élevée, tel qu’à la lumière directe
du soleil ou à proximité d’un feu. Elle risque de
prendre feu, d’exploser ou de provoquer un
incendie. Ne plongez pas et ne mouillez pas la
batterie dans de l’eau douce ou de l’eau de mer.
Cela risque de provoquer une électrocution.
ATTENTION
La taille et le nombre de piles suivants sont requis
pour la télécommande.
Taille : AA (R6)
Nombre de pile(s) : deux pièces
Pour éviter tout risque d’explosion, utilisez
uniquement le type de pile suivant.
Piles au manganèse
Le symbole avertit l’utilisateur de la présence
d’importantes instructions concernant le
fonctionnement et la maintenance (entretien)
dans la documentation qui accompagne l’appareil.
AVERTISSEMENT
Ne regardez pas dans l’objectif pendant son
utilisation.
ATTENTION
L’emploi de commandes ou ajustements ou
l’exécution de procédures autres que celles
spécifiées ici peut provoquer une exposition
dangereuse au rayonnement.
IEC 60825-1:2014
PRODUIT LASER DE CLASSE 1
Comme pour n’importe quelle
source de lumière vive, ne
regardez pas fixement le
faisceau, RG2 IEC 62471-5:2015.
Français
FR 20
ATTENTION
L’emploi d’instruments optiques avec ce produit
augmentera les risques pour les yeux.
Informations sur l’emplacement des étiquettes
Spécifications de la source lumineuse
Diodes laser 5,2 W × 24
Longueur d’onde : 450 - 460 nm
Angle de divergence du faisceau par rapport à
l’objectif de cet appareil
Zoom maximum : α = 39,9 °
Zoom minimum : α = 25,5 °
Ne placez aucun objet devant l’objectif pour éviter
de bloquer la lumière durant la projection. La
chaleur provenant de la lumière risque
d’endommager l’objet.
Pour les clients en Europe
Fabricant : Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japon
Pour toute question relative à la conformité des
produits dans l’UE : Sony Belgium, bijkantoor van
Sony Europe B.V., Da Vincilaan 7-D1, 1930
Zaventem, Belgique
ÉTIQUETTE DE CLASSE 1
PICTOGRAMME ATTENTION RG2
Port d’émission laser
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
in altre lingue
- English: Sony VPL-XW7000 User guide
- français: Sony VPL-XW7000 Mode d'emploi
- español: Sony VPL-XW7000 Guía del usuario
- Deutsch: Sony VPL-XW7000 Benutzerhandbuch