Candy CHG6BF4WEX Manuale utente

Categoria
Piani cottura
Tipo
Manuale utente

Questo manuale è adatto anche per

HOBS
USER INSTRUCTIONS
PIANI COTTURA
ISTRUZIONI PER L’USO
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) Italy
GB
IT
02
06
02 GB
SAFETY INSTURUCTIONS
We recommend you keep the instructions for
installation and use for later reference, and before
installing the hob, note its serial number in case
you need to get help from the after sales service.
WARNING: the appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children under
8 years of age must be kept away from the
appliance unless they are continuously
supervised.
WARNING: use only hob guards designed by the
Manufacturer of the cooking appliance or
indicated by the Manufacturer of the appliance in
the instructions for use as suitable or hob guards
incorporated in the appliance. The use of
inappropriate guards can cause accidents.
WARNING: unattended cooking on a hob with fat
or oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but
switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
WARNING: danger of fire: do not store items on
the cooking surfaces.
WARNING: if the surface is cracked, do not touch
the glass and switch off the appliance to avoid the
possibility of electric shock.
This appliance can be used by children aged from
8 years and above and people with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children should be supervised
to ensure that they do not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
CAUTION: the cooking process must be
supervised. A short term cooking process has to
be supervised continuously.
It is strongly recommended to keep children away
from the cooking zones while they are in operation
or when they are switched off, so long as the
residual heat indicator is on, in order to prevent
the risks of serious burns.
This appliance is not intended to be operated by
means of an external timer or separate remote
control system.
If present do not to stare into halogen lamp hob
elements.
Connect a plug to the supply cable that is able to
bear the voltage, current and load indicated on the
tag and having the earth contact. The socket must
be suitable for the load indicated on the tag and
must be having the earth contact connected and
in operation. The earth conductor is yellow-green
in color. This operation should be carried out by a
suitably qualified professional. In case of
incompatibility between the socket and the
appliance plug, ask a qualified electrician to
substitute the socket with another suitable type.
The plug and the socket must be conformed to the
current norms of the installation country.
Connection to the power source can also be
made by placing an omnipolar breaker between
the appliance and the power source that can bear
the maximum connected load and that is in line
with current legislation.
The yellow-green earth cable should not be
interrupted by the breaker. The socket or
omnipolar breaker used for the connection should
be easily accessible when the appliance is
installed.
The disconnection may be achieved by having
the plug accessible or by incorporating a switch in
the fixed wiring in accordance with the wiring
rules.
If the supply cord is damaged, it must be replaced
by Manufacturer, its service agent or similarly
qualified people in order to avoid a hazard. The
earth conductor (yellow-green) must be longer
than 10 mm on the terminal block side. The
internal conductors section should be appropriate
to the power absorbed by the hob (indicated on
the tag). The type of power cable must be
HO5V2V2-F.
Do not put metallic objects such as knives, forks,
spoons or lids on the hob. They could heat up.
Aluminum foil and plastic pans must not be placed
on heating zones.
After every use, some cleaning of the hob is
necessary to prevent the build-up of dirt and
grease. If left, this is recooked when the hob is
used and burns giving off smoke and unpleasant
smells, not to mention the risks of fire
propagation.
Never use a steam or high pressure spray to
clean the appliance.
Do not touch the heat zones during operation or
for a while after use.
Never cook food directly on the glass ceramic
hob.
Always use the appropriate cookware.Always
place the pan in the center of the unit that you are
cooking on.
Do not place anything on control panel.
Do not use the hob as a working surface.
Do not use the surface as a cutting board.
Do not store heavy items above the hob. If they
drop onto the hob, they may cause damage.
Do not use the hob for storage of any items.
Do not slide cookware across the hob.
No additional operation/setting is required in
order to operate the appliance at the rated
frequencies
03 GB
The hob may be installed in any worktop which is heat resistant to a
temperature of 100°C, and has a thickness of 25-45 mm. The
dimensions of the insert to be cut out of the worktop are in shown in
Figure 2.
When there is an accessible space between the built-in hob and the
cavity below, a dividing wall made of insulating material should be
inserted (wood or a similar material) (Figure 3).
If the Hob is fitted next to a cabinet on either side, the distance between
the Hob and the cabinet must be at least 15 cm ; while (see Figure 4)
the distance between the hob and the rear wall must be at least .70 mm
The distance between the hob and any other unit or appliance above it
(e.g. An extractor hood) must be no less than 70 cm . (Figure 4)
Metal objects in the drawer may reach high temperatures due to
air recirculation. It is therefore recommended to use an
intermediate wood panel.
Important - The diagram in figure 1 shows how the sealant should
be applied.
The Hob unit is fitted by attaching the Fixing Clamps supplied, using
the holes at the base of the unit.
If a hob of 60 cm is fitted above an oven it is recommended that
openings are created within the built in furniture to ensure correct air
circulation.
The size of these openings must be at least 300 cm2 and placed as
shown in Figure 5.
When a 60 cm hob or a 75 cm hob is fitted over a built in oven, the latter
must be fan cooled.
1.1 BUILDING IN
1.2. SUITABLE LOCATION
This appliance must be installed in accordance with the regulations in
force and only used in a well ventilated space. Read the instructions
before installing or using this appliance.
A gas-powered cooking appliance produces heat and humidity in the
area in which it is installed. For this reason you should ensure good
ventilation either by keeping all natural air passages open or by
installing an extractor hood with an exhaust flue. Intensive and
prolonged use of the appliance may require extra ventilation, such as
the opening of a window or an increase in speed of the electric fan, if
you have one.
If a hood can not be installed, an electric fan should be fitted to an
outside wall or window to ensure that there is adequate ventilation.
The electric fan should be able to carry out a complete change of air in
the kitchen 3-5 times every hour. The installer should follow the
relevant national standards.
2. ELECTRICAL CONNECTION (FOR U.K. ONLY)
Warning - this appliance must be earthed
This appliance is designed for domestic use only. Connection to the main
supply must be made by a competant electrician, ensuring that all current
regulations concerning such installations are observed.
The appliance must only be connected to a suitably rated spur point, a
3 pin 13 amp plug/socket is not suitable. A double pole switch must be
provided and the circuit must have appropriate fuse protection.
Further details of the power requirement of the individual product will
be found in the users’ instruction and on the appliance rating plate. In
the case of built-in product you are advised, should you wish to use a
longer cable than the one supplied, that a suitably rated heat resistant
type must be used.
The wiring must be connected to the mains supply as follows:
CONNECT TO SPUR TERMINAL
Green & Yellow Wire Earth Connection
Blue Wire Neutral Connection
Brown Wire Live Connection
Note: We do not advocate the use of earth leakage devices with
electric cooking appliances installed to spur points because of the
«nuisance tripping» which may occur. You are again reminded that the
appliance must be correctly earthed, the manufacturer declines any
responsibility for any event occurring as a result of incorrect electrical
installation.
2.1. ELECTRICAL CONNECTION
Check the data on the rating plate, located on the outside of the unit, to
ensure that the supply and input voltage are suitable.
Before connection, check the earthing system.
By Law, this appliance must be earthed. If this regulation is not complied
with, the Manufacturer will not be responsible for any damage caused to
persons or property. If a plug is not already attached, fit a plug
appropriate to the load indicated on the rating plate. The earth wire is
coloured yellow/green. The plug should always be accessible.
Where the Hob is connected direct to the electricity supply, a circuit
breaker must be fitted.
If the power supply cord is damaged this is to be replaced by a qualified
engineer so as to prevent any potential risk.
The earth wire ( green and yellow coloured ) must be at least 10 mm
longer than the live and neutral wires.
The section of the cable used must be of the correct size in relation to
the absorbed power of the hob.
Please check rating plate for the power details and ensure that the
power supply cord is of the type 3x0.75 mm² H05 V2V2-F.
LIVE
EARTH
NEUTRAL
L
N
Power Cable
Brown Wire
Green/Yellow Wire
Blue Wire
Mains Supply
If an appliance is not fitted with a supply cord and a plug, or with other
means for disconnection from the supply mains having a contact
separation in all poles that provide full disconnection under overvoltage
category III conditions, the instructions shall state that means for
disconnection must be incorporated in the fixed wiring in accordance with
the wiring rules.
1. INSTRUCTIONS FOR THE INSTALLER
INSTALLING A DOMESTIC APPLIANCE CAN BE A COMPLICATED OPERATION WHICH IF NOT CARRIED OUT CORRECTLY, CAN SERIOUSLY
AFFECT CONSUMER SAFETY. IT IS FOR THIS REASON THAT THE TASK SHOULD BE UNDERTAKEN BY A PROFESSIONALLY QUALIFIED
PERSON WHO WILL CARRY IT OUT IN ACCORDANCE WITH THE TECHNICAL REGULATIONS IN FORCE. IN THE EVENT THAT THIS ADVICE IS
IGNORED AND THE INSTALLATION IS CARRIED OUT BY AN UNQUALIFIED PERSON, THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR ANY TECHNICAL FAILURE OF THE PRODUCT WHETHER OR NOT IT RESULTS IN DAMAGE TO GOODS OR INJURY TO INDIVIDUALS.
These instructions are for qualified personnel, installation of
equipment must be in line with the relevant national standard. (For
U.K. only: by law the gas installation\commissioning must be
carried out by a "Gas Safe" installer)
All work must be carried out with the electricity supply disconnected.
The rating plate on the hob shows the type of gas with which it is
designed to be used. Connection to the mains gas supply or gas
cylinder should be carried out after having checked that it is regulated
for the type of gas with which it will be supplied. If it is not correctly
regulated see the instructions in the following paragraphs to change
gas setting.
For liquid gas (cylinder gas) use pressure regulators which comply
with the relevant national standards.
Use only pipes,washers and sealing washers which comply with the
relevant national standards.
For some models a conic link is furnished to outfit for the installation in
the countries where this type of link is obligatory; in picture 8 it is
pointed out how to recognize the different types of links (CY =
cylindrical, CO = conic). In every case the cylindrical part of the link
has to be connected to the hob.
When connecting the hob to the gas supply via use offlexible hoses
please ensure that the maximum distance covered by the hose does
not exceed 2 metres.
The flexible tube shall be fitted in such a way that it cannot come into
contact with a moveable part of the housing unit (e.g. a drawer) and does
not pass through any space where it may become crushed/ kinked or
damaged in any way.
To prevent any potential damage to the hob please carry out the
installation following this sequence (picture 6):
1)As illustrated, assemble parts in sequence:
A: 1/2 Male Adaptor Cylindirical
B: 1/2 Seal
C: 1/2 Female Gas Adaptor Conical-Cylindirical or
Cylindirical-Cylindirical
2.2. GAS CONNECTION
Table A
Burner Type
Ø pan/pot
(cm)
AUX
SR
R
UR
10 - 18
12 - 22
16 - 26
16 - 26
Auxiliary
Semi Rapid
Rapid
Power
(kW)
1,00
1,75
2,70
3,50
G20/20 mbar
(methane)
95 l/h
167 l/h
257 l/h
334 l/h
G30/28-30 mbar
(LPG)
73 g/h
127 g/h
196 g/h
255 g/h
04 GB
2.3. ADAPTING THE HOB TO DIFFERENT
TYPES OF GAS
To adapt the Hob for use with different types of gas, carry out the
following instructions:
•Remove the grids and burners
•Insert on hexagonal spanner (7 mm) into the burner support (Figure
7)
•Unscrew the injector and replace it with one suitable for the gas to be
used (see gas type table)
2.4. REGULATING THE MINIMUM FLAME
After lighting the burners, turn the control knob to the minimum setting
and then remove the knob (this can easily be removed by applying
gentle pressure).
Using a small «Terminal» type screwdriver the regulating screw can
be adjusted as in Figure 9. Turning the screw clockwise reduces the
gas flow, whilst turning it anticlockwise increases the flow – Use this
adjustment to obtain a flame of approximately 3 to 4 mm in length and
then replace the control knob.
When the gas supply available is LPG - the screw to set the idle flame
must be turned (clockwise) to the end stop.
When you have carried out the new gas regulation, replace the old gas
rating plate on your appliance with one (supplied with hob) suitable for
the type of gas for which it has been regulated.
3. USE OF HOB - USER INSTRUCTIONS
This appliance must only be used for the purpose for which it is
intended, domestic cooking, and any other use will be considered
improper and could therefore be dangerous. The Manufacturer will
not be responsible for any damage or loss resulting from improper
use.
3.1. USING THE GAS BURNER
To ignite the burners, place a lighted taper close to the burner, press in
and turn the control knob anti-clockwise.
If the burners have not been used for a couple of days, wait for a few
seconds before lighting the burner, this will allow any air present in the
pipes to escape.
For appliances fitted with electronic ignition carry out the following:
Push in and turn the knob anticlockwise to the ignition symbol.
İgnite the burner by pressing the sparker button.
For hobs fitted with automatic ignition simply push in and turn the knob
to the ignition symbol.
The ignition system will continue to generate sparks as long as the
control knob is being pressed.
If the burner has not ignited within 5 seconds, turn the knob to the 0
position and repeat the operation.
For models fitted with a safety tap (which cuts-off the flow of gas if the
flame is accidentally extinguished) the burners are ignited and
described above, but care must be taken.
Prior to switching on the gas hob ensure that the burners and burner
caps are correctly placed within their position.
Warning: If there is no electricity on appliance, to ignite the burner a
lighter should be used;
- Push in and turn the knob anti-clockwise to the ignition symbol,
- While pushing in the button ignite the burner by using a lighter and
keep button pushed in 5 seconds after ignition.
GENERAL ADVISE
For best results, use cooking vessels with a flat surface. The size of
the surface should match the gas burner side as follows. Table A.
4. MAINTENANCE AND CLEANING
Before cleaning the hob, ensure the appliance has cooled down.
Remove the plug from the socket or (if connected directly) switch off
the electricity supply.
Cleaning and user maintenance shall not be made by children without
supervision
Never use abrasives, corrosive detergents, bleaching agents or
acids. Avoid any acid or alkaline substances (lemon, juice, vinegar
etc.) on the enamelled, varnished or stainless steel sections.
When cleaning the enamelled, varnished or chrome sections, use
warm soapy water or a non caustic detergent. For stainless steel use
an appropriate cleaning solution.
The burners can be cleaned with soapy water. To restore their original
shine, use a household stainless steel cleaner. After cleaning, dry the
burners and replace.
It is important the Burners are replaced correctly.
Chromed grids and burners
Chromed grids and burners have a tendency to discolour with use.
This does not jeopardize the functionality of the hob.
Our After Sales Service Centre can provide spare parts if required.
For smaller containers the gas burner should be regulated so that the
flame does not overlap the base of the pan. Vessels with a concave or
convex base should not be used.
WARNING: If a flame is accidentally extinguished, turn the knob
to the off position and do not attempt to re-ignite if for at least 1
minute.
If over the years the gas taps become stiff to turn it is necessary to
lubricate them.
Such operation must be carried out only by qualified Service
Engineers.
2)Tighten the joints with the spanner, remembering to twist the
pipes into position.
3)Attach fitting C to mains gas supply using rigid copper pipe or
flexible steel pipe.
IMPORTANT: carry out a final check for leaks on the pipe
connections using a soapy solution. NEVER USE A FLAME.
Also, make sure that the flexible pipe cannot come into contact
with a moving part of the cabinet (eg.adrawer) and that it is not
situated where it could be damaged.
Warning: If gas can be smelt in the vicinity of this appliance turn off
the gas supply to the appliance and call the engineer directly. Do not
search for a leak with a naked flame.
Before using burner, be sure, grid perimeters center the burner as
below figure.
If you are using Cast Iron Grids; underneath the grid, position of it is
stated. Be sure for the exact grid is used in correct position.
DC 4 kW MONO
16 - 26 4,00 381 l/h 291 g/h
Ultrarapid
05 GB
This appliance has been designed for non-professional, i.e. domestic, use.
Table 1
This appliance is marked according to the European
directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE). WEEE contains both
polluting substances (which can cause negative
consequences for the environment) and basic
components (which can be re-used). It is important to
have WEEE subjected to specific treatments, in order
to remove and dispose properly all pollutants, and
recover and recycle all materials.
Individuals can play an important role in ensuring that WEEE does not
become an environmental issue; it is essential to follow some basic
rules:
WEEE shall not be treated as household waste.
• WEEE shall be handed over to the relevant collection points
managed by the municipality or by registered companies. In many
countries, for large WEEE, home collection could be present.
• When you buy a new appliance, the old one may be returned to the
retailer who has to collect it free of charge on a one-to-one basis, as
long as the equipment is of equivalent type and has the same
functions as the supplied equipment.
Declaration of compliance: This equipment, in the parts intended to
come into contact with food, complies with the regulations laid down in
EEC directives 89/109.
The appliance complies with European Directive 2009/142/EC (GAD)
and starting from 21/04/2018 with Gas Appliances Regulation
2016/426 (GAR).
6. PROTECTION OF THE ENVIRONMENT
The Manufacturer will not be responsible for any inaccuracy resulting
from printing or transcript errors contained in this brochure. We
reserve the right to carry out modifications to products as required,
including the interests of consumption, without prejiudice to the
characteristics relating to safety or function.
By placing the mark on this product, we are confirming
compliance to all relevant European safety, health and environmental
requirements which are applicable in legislation for this product.
5. AFTERCARE
Before calling out a Service Engineer please check the following:
that the plug is correctly inserted and fused;
that the gas supply is not faulty.
If the fault cannot be detected:
Switch off the appliance and call the After Service Centre. DO NOT
TAMPER WITH THE APPLIANCE.
Burner Plate
Burner
Type
FFD
Aux 1kW
Sr 1,75 kW
R 2,7 kW
Dc 4 kW Mono
Nominal Heat Input
G20/20 mbar
G30/28-30 mbar
Installation Class
Voltage V/Frequency Hz
Electrical Input Power
Electric Ignition
Product Dimension
3
220-240 V/ 50-60 Hz
1
YES
595x510
3
220-240 V/ 50-60 Hz
1
YES
595x510
UH60MF
YES
1
UH60MF
YES
1
4 Gas
Aux/SR/R/DC 4 Mono
4 Gas
Aux/2SR/R
1 2
1 1
1 -
9,45 kW
900 l/h
688 g/h
7,2 kW
686 l/h
524 g/h
3
220-240 V/ 50-60 Hz
1
YES
745x510
UH75MF
YES
1
5 Gas
UR/2R/SR/AUX
1
2
-
11,65 kW
1110 l/h
848 g/h
UR 3,5 kW - - 1
3
220-240 V/ 50-60 Hz
1
YES
745x510
UH75MF
YES
1
5 Gas
DC/2R/SR/AUX
1
2
1
12,15 kW
1158 l/h
884 g/h
-
3
220-240 V/ 50-60 Hz
1
YES
745x510
UH75MF
YES
1
5 Gas
DC/R/2SR/AUX
2
1
1
11,2 kW
1067 l/h
815 g/h
-
3
220-240 V/ 50-60 Hz
1
YES
595x510
UH60MF
YES
1
3 Gas
Aux/R/DC 4 Mono
-
1
1
7,7 kW
734 l/h
560 g/h
-
06 IT
Si consiglia di conservare le istruzioni di uso e
montaggio per riferimento successivo e, prima di
montare il piano di cottura, annotare il suo numero
di serie per richiedere assistenza al Servizio post-
vendita.
AVVERTENZA: l'elettrodomestico e le sue parti
accessibili diventano calde durante l'uso.
Prestare attenzione ad evitare qualsiasi contatto
con le resistenze di riscaldamento. Mantenere
lontani dall'elettrodomestico i bambini di e
inferiore agli 8 anni, a meno che non siano
continuamente supervisionati.
AVVERTENZA: utilizzare unicamente protezioni
per piani di cottura progettate dal produttore della
c u c i n a o i n d i c a t e d a l p r o d u t t o r e
dell'elettrodomestico nelle istruzioni d'uso come
adatte, o ancora protezioni incorporate
nell'elettrodomestico. L'utilizzo di protezioni non
adatte può provocare incidenti.
AVVERTENZA: la cottura senza sorveglianza su
un piano di cottura in presenza di grasso o olio
nella pentola può essere pericolosa, con rischio di
incendi. NON cercare MAI di spegnere un
i n c e n d i o c o n a c q u a , b e n s ì s p e g n e r e
l'elettrodomestico e coprire la fiamma con un
coperchio o una coperta antifiamma.
AVVERTENZA: pericolo di incendio: non
appoggiare nulla sulle superfici di cottura.
AVVERTENZA: se la superficie è crepata, non
t o c c a re l a v et r oc e ra m ic a e s pe g ne r e
l'elettrodomestico per evitare la possibilità di
elettrocuzioni.
L'elettrodomestico può essere utilizzato da
bambini di età superiore a 8 anni e da persone
con ridotte capacità fisiche, sensoriali o mentali,
oppure prive di esperienza e conoscenza, se
supervisionate o istruite riguardo all'uso
dell'elettrodomestico in sicurezza, e se
comprendono i rischi che derivano dall'uso dello
s t e s s o . I b a m b i n i d o v r eb be ro e ss er e
supervisionati per assicurarsi che non giochino
con l 'elettro d o mestico . La pulizia e l a
manutenzione da parte dell'utente non possono
essere effettuate da bambini senza supervisione.
ATTENZIONE: il processo di cottura deve essere
supervisionato. Un processo di cottura di breve
termine deve essere supervisionato in continuo.
Si consiglia vivamente di tenere i bambini a
distanza dalle zone di cottura quando queste
sono in funzione o quando sono spente, per tutto il
tempo durante il quale l'indicatore di calore
residuo rimane attivo, per evitare il rischio di
ustioni gravi.
Questo elettrodomestico non è concepito per
funzionare con temporizzatori esterni o con
sistemi di comando a distanza separati.
Se è presente, non guardare direttamente gli
elementi riscaldati della lampada alogena.
Collegare al cavo di alimentazione una spina
dimensionata per la tensione, la corrente e la
potenza indicate nella targhetta e dotata del
contatto di terra. La presa deve essere
dimensionata per la potenza indicata sulla
targhetta e deve avere il contatto di terra collegato
e funzionante. Il conduttore di terra è giallo-verde.
Questa operazione deve essere eseguita solo da
ISTRUZIONI DI SICUREZZA
un tecnico adeguatamente addestrato. In caso di
i n c o m p a t i b i l i t à t r a p r e s a e s p i n a
dell'elettrodomestico, richiedere ad un tecnico
specializzato di sostituire la presa con un'altra di
tipo compatibile. La spina e la presa devono
essere conformi alle normative attuali del paese di
installazione.
Il collegamento alla rete di alimentazione può
essere effettuato anche collocando un interruttore
automatico onnipolare tra l'elettrodomestico e la
rete di alimentazione, in grado di supportare il
carico massimo collegato, in linea con la
legislazione corrente.
Il cavo di terra giallo-verde non deve essere
interrotto dall'interruttore automatico. La presa o
l'interruttore automatico onnipolare utilizzati per il
collegamento devono essere facilmente
ac c es si bi l i al m o me nt o d el m on t ag gi o
dell'elettrodomestico.
La disconnessione p essere eseguita con la
spina accessibile o aggiungendo un interruttore
sul cablaggio fisso, nel rispetto delle normative
relative ai cablaggi.
Se il cavo di alimentazione dell'elettrodomestico
dovesse essere danneggiato, farlo sostituire dal
produttore, dal suo servizio tecnico o da tecnici
qualificati, per evitare rischi. Il conduttore di terra
(giallo-verde) deve essere più lungo di 10 mm sul
lato della morsettiera. La sezione dei conduttori
interni deve essere adatta alla potenza assorbita
dal piano di cottura (come indicato sulla
targhetta). Il cavo di alimentazione deve essere di
tipo HO5V2V2-F.
Non appoggiare sul piano di cottura oggetti
metallici come coltelli, forchette, cucchiai o
coperchi. Potrebbero scaldarsi eccessivamente.
Non appoggiare sulle zone riscaldanti pellicole di
alluminio e padelle in plastica.
Dopo ogni utilizzo è necessario pulire il piano di
cottura per evitare l'accumulo di sporcizia e
grasso. Se ci sono accumuli di questo tipo
vengono cotti nuovamente quando il piano di
cottura viene acceso, creando fumo e odori
sgradevoli per non parlare del rischio di
propagazione di incendi.
Non utilizzare mai un getto di vapore o ad alta
pressione per la pulizia dell'elettrodomestico.
Non toccare le zone riscaldanti durante il
funzionamento o per un breve periodo dopo l'uso.
Non cuocere mai gli alimenti direttamente sul
piano di cottura in vetroceramica.
Utilizzare sempre i recipienti di cottura adatti.
Mettere sempre la pentola al centro del gruppo sul
quale si sta effettuando la cottura. Non
appoggiare nulla sul pannello di comando.
Mai utilizzare il piano di cottura come superficie di
lavoro.
Mai utilizzare il piano di cottura come tagliere.
Non appoggiare oggetti pesanti al di sopra del
piano di cottura. Se cadono sul piano possono
danneggiarlo.
Non utilizzare il piano di cottura per riporvi oggetti.
Non fare scivolare i recipienti sul piano di cottura.
Il funzionamento dell'elettrodomestico alle
frequenze nominali non richiede alcuna
operazione o impostazione.
Il plano cottura può essere Installato In qualsiasi top che sia resistente
ad una temperatura di 100°C e abbia uno spessore di 25-45 mm. La
dimensione del vano di Inserimento del plano cottura è mostrata In
Figura 2.
Qualora sotto II plano cottura vi sia un vano accessibile bisogna
predisporre un parete di divisione In materiale Isolante (legno o slmili)
(Figura 3).
Qualora II plano venga Incassato In modo che sul suo lato sinistro o
destro ci sia una parete, la distanza non dev'essere Inferiore a 15 cm
(vedere Figura 4); mentre la distanza tra la parete posteriore e II plano
deve essere di almeno 70 mm.
La distanza tra II plano cottura e qualsiasi altro apparecchio sopra di
esso (es. una cappa) non deve essere Inferiore a 70 cm (Figura 4).
Oggetti metallici nel cassetto possono raggiungere temperature
elevate a seguito del ricircolo dell'aria. Pertanto si consiglia di
utilizzare una separazione intermedia in legno.
Importante - Il diagramma In figura 1 mostra come deve essere
applicato il sigillante.
Il piano cottura è fissato grazie a morsetti di supporto agganciati alla
base.
Se sopra un forno è montato un piano cottura di 60 cm, si consiglia di
creare delle aperture all'interno dei mobili per garantire la corretta
circolazione dell'aria.
La dimensione di queste aperture deve essere di almeno 300 cm² e
posizionate come in Figura 5.
Quando un piano cottura da 60 cm o 75 cm viene posizionato sopra un
forno, la parte posteriore deve essere raffreddata ad aria.
1.1. INSTALLAZIONE
1.2. LOCAZIONI CONSIGLIATE
Questo apparecchio può essere installato in accordo con il
regolamento vigente e solo in un ambiente ben ventilato. Leggere le
istruzzioni prima dell'installazione o l'uso dell'apparecchio.
Un piano gas produce umidità e calore nell'area in cui è installato. Per
questa ragione bisogna garantire una buona ventilazione sia tramite
passaggio di aria naturale sia grazie all'installazione di una cappa
d'aspirazione. Un uso intensivo e prolungato dell'apparecchio
richiede una ventilazione maggiore, come l'apertura di una finestra o
aumentando la velocità di ventole di raffreddamento, se possibile. Se
non vi è la possibilità di installare una cappa, un aspiratore può essere
installato su una parete esterna o su una finestra affinché ci siano
delle correnti d'aria nell'area.
Una ventola elettrica è in grado di assicurare un cambio d'aria
completo nella cucina 3-5 volte ogni ora. L'installatore dovrà seguire
gli standard nazionali pertinenti.
07 IT
1. ISTRUZIONI PER L'INSTALLATORE
INSTALLARE UN ELETTRODOMESTICO PUÒ ESSERE UN'OPERAZIONE COMPLICATA CHE, SE NON ESEGUITA CORRETTAMENTE, PUÒ
COMPROMETTERE SERIAMENTE LA SICUREZZA DELL'UTENTE. È PER QUESTA RAGIONE CHE L'OPERAZIONE DEV'ESSERE CONDOTTA
DA PERSONALE PROFESSIONALMENTE QUALIFICATO CHE TENGA PRESENTE LE NORME VIGENTI. NEL CASO IN CUI QUESTO AVVISO
VENGA IGNORATO E L'INSTALLAZIONE VENGA ESEGUITA DA PERSONALE NON QUALIFICATO, IL PRODUTTORE DECLINA OGNI
RESPONSABILITÀ PER OGNI PROBLEMA TECNICO DEL PRODOTTO SIA IN CASO DI DANNI A COSE O PERSONE SIA IN ASSENZA DI ESSI.
2.1. CONNESSIONE ELETTRICA
Controllare i dati sulla placca segnaletica, situata sotto l'unità, per
assicurarsi che il collegamento elettrico sia corretto. Prima della
connessione, controllare l'impianto di messa a terra. Per legge,
quest'apparecchio deve avere la messa a terra. Se questa
operazione non viene eseguita, il produttore non sarà responsabile di
eventuali danni occorsi a persone o proprietà. Se non è già applicata
una spina, applicarne una appropriata come indicato sulla placca
segnaletica. Il cavo di messa a terra è di color verde/giallo. La spina
deve essere posizionata in modo tale che sia sempre accessibile.
Qualora il piano cottura sia connesso direttamente all'alimentazione
principale, bisognerà predisporre anche un salvavita. Se il cavo di
alimentazione è danneggiato dovrà essere sostituito da personale
qualificato in modo da prevenire qualsiasi potenziale rischio.
Il cavo di messa a terra (di color verde/giallo) deve essere più lungo di
almeno 10 mm rispetto ai cavi neutro e fase. La sezione del cavo
usato deve essere delle giuste dimensioni in base all'assorbimento
dell'apparecchio.
Si prega di controllare la placca segnaletica per i dettagli riguardanti la
potenza dell'aparecchio e assicurare che il cavo di connessione sia
dei tipi 3x0.75 mm² H05 V2V2-F.
FASE
TERRA
NEUTRA
F
N
Cavo di
alimentazione
Cavo Marrone
Cavo Verde/Giallo
Cavo Blu
Alimentazione
principale
Il mezzo di disconnessione deve essere incorporato nel cablaggio
fisso in accordo con le leggi di cablaggio.
Per il collegamento diretto alla rete, è necessario prevedere un
dispositivo che assicuri la disconnessione dalla rete, con una
distanza di apertura dei contatti che consenta la disconnessione
completa nelle condizioni della categoria di sovratensione III,
conformemente alle regole di installazione.
2.2. CONNESSIONE GAS
Queste istruzioni sono per personale qualificato, l'installazione
dell'apparecchio deve seguire le direttive standard nazionali. (Solo
per U.K.: per legge l'installazione deve essere commissionata ad
un operatore "Corgi")
Qualsiasi operazione deve essere svolta staccando la corrente
elettrica.
La placca segnaletica sotto il piano cottura mostra il tipo di gas con cui
bisogna allacciare l'apparecchio. La connessione all'alimentazione
gas principale deve essere apportata dopo aver controllato che sia
regolata in base al tipo di gas previsto dall'apparecchio. Se non è
regolata correttamente guardare le istruzioni nei paragrafi seguenti
per cambiare le impostazioni gas.
Per il gas liquido GPL usare dei regolatori di pressione che siano
conformi con gli standard nazionali.
Usare solo tubazioni, guarnizioni e sigillanti che siano conformi con gli
standard nazionali.
Per alcuni modelli viene fornito in dotazione una raccordo conico,
come attrezzatura per l'installazione, nei paesi dove è obbligatorio per
legge; in Figura 8 viene mostrato come riconoscere i diversi tipi di
raccordi (CY=cilindrico, CO=conico). In qualsiasi caso la parte
cilindrica del raccordo sarà connessa al piano cottura.
Quando la connessione del piano all'alimentazione gas verrà
effettuata utilizzando manicotti flessibili assicurarsi che la distanza
massima coperta dal tubo non superi i 2 metri.
Il tubo flessibile deve essere sistemato in modo tale che non possa
entrare in contatto con parti mobile dell'unità abitativa (ad esempio un
cassetto) e non passi attraverso alcuno spazio che sia suscettibile a
congestionamento.
Per prevenire qualsiasi danno al piano seguire l'installazione
seguendo questa sequenza (Figura 6):
1) Come illustrato, assemblare le parti in sequenza:
A: 1/2 Adattatore cilindrico maschio
B: ½ Sigillante
C: 1/2 Adattatore gas femmina conico-cilindrico o cilindrico-cilindrico
2) Stringere le giunture con la chiave inglese, ricordando di
mettere le tubature in posizione.
3) Attaccare l'elemento C all'alimentazione gas usando tubi di
rame o manicotti flessibili in acciaio.
IMPORTANTE: eseguire un ultimo controllo con una soluzione a
base di sapone per controllare che le tubature non perdano. Non
usare mai una fiamma. Inoltre assicurarsi che il manicotto
flessibile non venga a contatto con una parte mobile della cucina
(es. cassetto) e che non sia situato dove possa essere
danneggiato.
Attenzione: se si avverte odore di gas in vicinanza dell'apparecchio
spegnere l'alimentazione e chiamare il tecnico. Non cercare
un'eventuale perdita con una fiamma.
Tabella A
Tipo di bruciatore
Ø / (cm)
AUX
SR
R
DC 4 kW MONO
10 - 18
12 - 22
16 - 26
16 - 26
Ausiliario
Semi rapido
Rapido
Potenza
(kW)
1,00
1,75
2,70
4,00
G20/20 mbar
(Metano)
95 l/h
167 l/h
257 l/h
381 l/h
G30/28-30 mbar
(LPG)
73 g/h
127 g/h
196 g/h
291 g/h
2.3. ADATTARE IL PIANO COTTURA CON
DIVERSI TIPI DI GAS
Per adattare il piano cottura all'uso di diversi tipi di gas, seguire le
seguenti istruzioni:
rimuovere le griglie e i bruciatori
inserire una chiave esagonale a tubo (7 mm) dentro il supporto
bruciatore (Figura 7)
• svitare l'iniettore e sostituirlo con uno compatibile con il tipo di gas
che verrà utilizzato (vedere la tabella tipi di gas).
2.4. REGOLARE IL MINIMO DELLA FIAMMA
Dopo aver acceso i bruciatori, girare la manopola del gas sul minimo
quindi rimuovere la manopola (può esere rimossa con una leggera
pressione).
L'apparecchio può essere usato da bambini dagli 8 anni in su e
persone con ridotte capacità fisiche, sensoriali o mentali o senza
esperienza e conoscenza del prodotto se supervisionate o dando loro
istruzioni riguardo al funzionamento dell'apparecchio in maniera
sicura e coscente del rischio possibile.
Usare una piccola estermità come un cacciavite per regolare la vite
come mostrato in Figura 9. Girando la vite in senso orario si riduce il
flusso di gas, viceversa in senso antiorario si aumenta il flusso - Usate
questi aggiustamenti per ottenere una fiamma approssimativamente
di 3/4 mm di lunghezza dopodiché riposizionare la manopola. Nel
caso in cui l'alimentazione sia di tipo GPL - la vite per regolare la
fiamma ideale deve essere ruotata (in senso orario) verso fine corsa.
Una volta che si è impostata la nuova regolazione, sostituire la
vecchia placca segnaletica sull'apparecchio con una adatta al tipo di
alimentazione gas che è stata installata.
3. USO DEL PIANO - ISTRUZIONI UTENTE
Quest'apparecchio deve essere utilizzato solo per gli scopi con cui è
stato pensato, qualsiasi altro utilizzo può essere considerato
improprio e quindi pericoloso. Il produttore non è responsabile per
qualsiasi danno o perdita dovuti ad un uso inappropriato.
Questo apparecchio non è pensato per essere usato da persone
(inclusi bambini) con handicap fisici, sensoriali o capacità mentali
limitate, con mancanza di esperienza e conoscenza, a meno che non
siano supervisionati o istruiti all'uso dell'apparecchio da una persona
responsabile della loro incolumità.
I bambini devono essere supervisionati per assicurare che non
giochino con l'apparecchio.
3.1. USO DEL BRUCIATORE GAS
Per l'accensione basta premere e girare la manopola sul simbolo di
accensione.
Il sistema di accensione partirà generando scintille. Quando la
fiamma si è accesa, tenere premuta la manopola per 5/6 secondi
dopodiché regolare la potenza.
Se non c'è corrente elettrica, accendere la fiamma con un fiammifero.
Se il bruciatore non si accende entro 3 secondi girare la manopola
sulla posizione 0, attendere un minuto e ripetere l'operazione.
ATTENZIONE:
Prima di accendere il gas assicurarsi che i bruciatori e i rispettivi
coperchi siano al loro posto.
Avvertenza: se non c'è elettricità sull'apparecchio, per accendere il
bruciatore dovrebbe essere usato un accendino;
- Premere e ruotare la manopola in senso antiorario fino al simbolo di
accensione,
- Premendo il pulsante, accendere il bruciatore usando un accendino
e tenere premuto il pulsante entro 5 secondi dopo l'accensione.
AVVISI GENERICI:
Per risultati migliori, la dimensione delle pentole deve seguire la
dimensione del bruciatore come mostrato qui a seguito. Tabella A.
08 IT
4. MANUTENZIONE E PULIZIA
Prima di pulire il piano cottura, assicurarsi che l'apparecchio si sia
raffreddato.
La pulizia e la manutenzione non dovrebbero essere fatte da bambini
senza supervisione.
Rimuovere la spina dalla presa corrente o (se connessa direttamente
all'alimentazione generale) togliere la corrente dall'impianto generale.
Non usare sostanze abrasive, detergenti corrosivi, agenti sbiancanti o
acidi. Evitare ogni tipo di acido o sostanza alcalina (limone, aceto, etc.)
per pulire le parti smaltate, laccate o in acciao inox.
Quando bisogna pulire le parti smaltate, laccate o cromate, usare acqua
calda con sapone o un detergente non corrosivo. Per l'acciaio
antimacchia usare una soluzione appropriata.
I bruciatori possono essere puliti con acqua e sapone. Per ripristinare la
loro brillantezza originale, usare un comune prodotto di pulizia per
superfici in acciaio. Dopo averli puliti, asciugarli e ricollocarli al loro posto.
È importante che i bruciatori vengano riposizionati correttamente.
Griglie cromate e bruciatori
Le griglie cromate e i bruciatori tendono a diventare scuri con l'uso.
Questo è un fenomeno normale ed inevitabile, che tuttavia non
compromette assolutamente il buon funzionamento del piano cottura. In
ogni caso sono disponibili, presso i centri servizio post vendita, i pezzi di
ricambio.
Per contenitori più piccoli il bruciatore gas può essere regolato in
modo che la fiamma non superi la pase della pentola. Recipienti con
una base concava o convessa non possono essere usati.
ATTENZIONE: se un bruciatore si spegne accidentalemente,
riportare la monopola sulla posizione spenta e non tentare di
riaccenderlo prima che sia passato 1 minuto.
Se col passare del tempo il rubinetto del gas si indurisce è necessario
lubrificarlo.
Questo tipo di operazione deve essere eseguita da personale
qualificato.
5. RIPRISTINO
Prima di contattare un tecnico del Centro Assistenza si prega di
controllare:
Che la spina sia ben inserita e collegata;
Che l'alimetazione gas non sia difettosa.
Se il malfunzionamento non è identificabile:
spegnere l'apparecchio - non manometterlo - e chiamare il Centro
Assistenza.
Prima di utilizzare il fornello, assicurarsi che i perimetri della griglia
siano posizionati al centro del fornello come nella figura sottostante.
Se state utilizzando Griglie in Ghisa; la posizione della griglia è
segnata al di sotto di essa. Assicurarsi che la griglia esatta sia
posizionata correttamente.
UR
16 - 26
Ultra Rapido
3,50 334 l/h 255 g/h
09 IT
Tabella 1
Questo apparecchio è stato progettato per uso domestico e non professionale.
Questo apparecchio è contrassegnato in conformità alla
Direttiva europea 2012/19/EU sulle apparecchiature
elettriche ed elettroniche (WEEE). I WEEE contengono sia
le sostanze inquinanti (che possono provocare
conseguenze negative sull'ambiente) che componenti di
base (che possono essere riutilizzati). È importante che i
WEEE siano soggetti a rattamenti specifici, per rimuovere e
smaltire correttamente tutti gli inquinanti e recuperare e riciclare tutti i
materiali.
I singoli possono giocare un ruolo importante nell'assicurare che i WEEE
non diventino un problema ambientale; è essenziale seguire alcune
regole di base:
I WEEE non devono essere trattati come rifiuti domestici.
I WEEE devono essere portati ai punti di raccolta appositi gestiti dal
comune o da società registrate. In molti Paesi, per i WEEE grandi,
potrebbe essere presente la raccolta domestica.
Quando si acquista un nuovo apparecchio, quello vecchio potrebbe
essere restituito al rivenditore che deve acquisirlo gratuitamente su base
singola, sempre che l'apparecchio sia del tipo equivalente e abbia le
stesse funzioni di quello acquistato.
6. RISPETTO DELL'AMBIENTE
Dichiarazione di conformità: questo apparacchio, nelle parti progettate
per venire a contatto con cibi, è conforme con le regolamentazioni
espresse nelle direttive EEC 89/109.
L'elettrodomestico è conforme alla Direttiva Europea 2009/142/CE
(GAD) e a partire dal 21/04/2018 con il regolamento GAR (Gas
Appliances Regulation) 2016/426.
Apponendo la marcatura su questo prodotto, dichiariamo,
sotto la nostra responsabilità, di ottemperare a tutti i requisiti relativi
alla tutela di sicurezza, salute e ambiente previsti dalla legislazione
europea in essere per questo prodotto.
// produttore non si rende responsabile per alcuna imprecisione dovuta a errori
di stampa o trascrizione contenuti nel libretto. Ci riserviamo il diritto di apportare
modifiche al prodotto qualora sia necessario, inclusi i consumi, senza
compromettere le caratteristiche inerenti la sicurezza del funzionamento.
Piastra del bruciatore
Bruciatore
Genere
FFD
Aux 1kW
Sr 1,75 kW
R 2,7 kW
Dc 4 kW Mono
Ingresso nominale di calore
G20/20 mbar
G30/28-30 mbar
Classe di installazione
Voltaggio / Frequenza (V / Hz)
Potenza elettrica in ingresso
Iniezione elettrica
Dimensione prodotto (mm)
UR 3,5 kW
7. GARANZIE
Il prodotto è garantito, oltre che ai sensi di legge, alle condizioni e nei
termini riportati sul certificato di garanzia convenzionale inserito nel
prodotto. Il certificato dovrà essere conservato e mostrato al nostro
Centro di Assistenza Tecnica Autorizzato, in caso di necessità,
insieme allo scontrino comprovante l’acquisto dell’elettrodomestico.
Puoi consultare le condizioni di garanzia anche sul nostro sito
internet.
Per ottenere assistenza compila l’apposito form on-line oppure
contattaci al numero che trovi indicato nella pagina di assistenza del
nostro sito internet.
3
220-240 V/ 50-60 Hz
1
Si
595x510
3
220-240 V/ 50-60 Hz
1
Si
595x510
UH60MF
Si
1
UH60MF
Si
1
4 Gas
Aux/SR/R/DC 4 Mono
4 Gas
Aux/2SR/R
1 2
1 1
1 -
9,45 kW
900 l/h
688 g/h
7,2 kW
686 l/h
524 g/h
3
220-240 V/ 50-60 Hz
1
Si
745x510
UH75MF
Si
1
5 Gas
UR/2R/SR/AUX
1
2
-
11,65 kW
1110 l/h
848 g/h
- - 1
3
220-240 V/ 50-60 Hz
1
Si
745x510
UH75MF
Si
1
5 Gas
DC/2R/SR/AUX
1
2
1
12,15 kW
1158 l/h
884 g/h
-
3
220-240 V/ 50-60 Hz
1
Si
745x510
UH75MF
Si
1
5 Gas
DC/R/2SR/AUX
2
1
1
11,2 kW
1067 l/h
815 g/h
-
3
220-240 V/ 50-60 Hz
1
Si
595x510
UH60MF
Si
1
3 Gas
Aux/R/DC 4 Mono
-
1
1
7,7 kW
734 l/h
560 g/h
-
10
560 mm
480 mm
min 70 mm
min 600 mm
min 50 mm
min 170 mm (60 cm)
min 250 mm (75 cm)
Figure 2Figure 1
1/2 GAS
CONICAL
C
A B
INJECTOR
Figure 6
Figure 7
Figure 8
60
75
35
mm
25 - 45 mm
min. 5 mm
min. 10 mm
min.
50 mm
25 - 45 mm
min. 5 mm
Figure 3
min.
50 mm
35
mm
min. 10 mm
min.
50 mm
min.
50 mm
2
120 cm
2
180 cm
Figure 5
Min. 70 cm
Figure 4
CONICAL
CYLINDRICAL
CYLINDRICAL
GAS TYPEHOBS
11
L5 L6
UR
L7
DC 4
Kw
Mono
L8
DC 4
Kw
Mono
UR
3,5 1,00
Max - Min Max - Min Max - Min Max - Min Max - Min Max - Min Max - Min
72X
(1Kw-0,3Kw)
70X
(1Kw-0,3Kw)
74F1
(1Kw-0,3Kw)
72F1
(1Kw-0,3Kw)
50
(1Kw-0,3Kw)
46
(1Kw-0,34Kw)
43H2
(1Kw-0,39Kw)
97Z
(1.75Kw-0.44Kw)
102F3
(1.75Kw-0.44Kw)
65
(1.75Kw-0.44Kw)
61
(1.75Kw-0.51Kw)
58M
(1.75Kw-0.58Kw)
91Z
(1.75Kw-0.44Kw)
98Y
(1.75Kw-0.44Kw)
109Y
(2.7Kw-0.75Kw)
115F2
(2.7Kw-0.75Kw)
80
(2.7Kw-0.75Kw)
78
(2.7Kw-0.83Kw)
73S
(2.7Kw-0.96Kw)
110F3
(2.7Kw-0.75Kw)
120F2
(2.7Kw-0.75Kw)
140T2P
(3.5Kw-1Kw)
143T2
(3.5Kw-1Kw)
93
(3.5Kw-1Kw)
93
(3.5Kw-1.4Kw)
83
(3.5Kw-1.2Kw)
130
(3.5Kw-1Kw)
141T2
(3.5Kw-1Kw)
151H3
(4Kw-1.8Kw)
146F3
(4Kw-1.8Kw)
100
(4Kw-1.8Kw)
94
(4Kw-2.2Kw)
78F4
(4Kw-2.1Kw)
145H3
(4Kw-1.8Kw)
150F3
(4Kw-1.8Kw)
II2EKB/P
II2HS3B/P
Efficiency Decleration 2016/426
UH60MF 4kW DIAMOND (L1)
AUX SR R DC
-
57,9 % 54,3 % 57,6 %
SINGLE BURNER EFFICENCY
MEDIUM %56,6
UH60MF - BIG REAR (L3, L5)
AUX SR R DC
-
60 % 55,9 % 54,3 %
SINGLE BURNER EFFICENCY
MEDIUM %56,7
UH60MF - BIG FRONT (L2)
AUX SR R DC
-
60 % 55,9 % 54,3 %
SINGLE BURNER EFFICENCY
MEDIUM %56,7
UH75MF UR - CENTRAL (L6)
AUX SR R UR
-
57,1 % 59,4 % 57,6 %
SINGLE BURNER EFFICENCY
MEDIUM %57,9
R
57,6 %
UH75MF 4kW - CENTRAL (L7)
AUX SR R DC
-
60 % 59,4 % 55,7 %
SINGLE BURNER EFFICENCY
MEDIUM %58,7
R
59,4 %
UH75MF 4kW - LATERAL (L8)
AUX SR SR DC
-
60 % 60 % 57,6 %
SINGLE BURNER EFFICENCY
MEDIUM %59,3
R
59,4 %
DC
4 kw
Mono
L1
DC
4 Kw
Mono
L2
DC 4
Kw
Mono
L3
DC
4 kw
Mono
L4
UH60MF - 3 GAS (L4)
AUX R DC
-
57,6 % 55,9 %
SINGLE BURNER EFFICENCY
MEDIUM %56,8
GB - IE
The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right
to carry out modifications to products as required, including the interests of con sumption, without prejudice to the characteri stics relating to safety or
function.
42834822 • A4 • 03.2020 • Rev_0
IT
La Ditta costruttrice declina ogni responsabilità per eventuali errori di stampa contenuti nel presente libretto. Si riserva inoltre il diritto di apportare le modifiche
che si renderanno utili ai propri prodotti senza compromettere le caratteristiche essenziali.
1 / 1

Candy CHG6BF4WEX Manuale utente

Categoria
Piani cottura
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue