DreamLine SHEN-2434580-89 Guida d'installazione

®

PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION

1-866-731-2244

MODEL #s

SHEN-2434340-89

SHEN-2434400-89

SHEN-2434460-89

SHEN-2434520-89

SHEN-2434580-89

finish -89=French Black

UNIDOOR TOULON ENCLOSURE

SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS

Do Not Return Product to the Store. Contact DreamLine

®

with any questions

IMPORTANT!

DreamLine

®

reserves the right to alter, modify or redesign products at any time without prior notice for the

purpose of product improvement and customer experience. Please refer to the model’s web page on

DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional

product details.

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

Right-hand return panel Left-hand return panel

®

This model is treated with DreamLine’s

exclusive ClearMax

TM

Glass technology.

This is a specially formulated coating

that prevents the build up of soap and

water spots.

Install the surface with the ClearMax

TM

label towards the inside of the shower.

Please note that depending on the

model, the glass may be coated on

either one or both surfaces.

For best results, squeegee the glass after

each use and dry with a soft cloth.

Installation Date

OD Number

(optional)

SKU Number

*found on the shipping box or label

if available.

Purchase Order

Number

Store/Vendor

Purchased From

Installed By:

Record the following purchase information for your records or in the event you need to contact DreamLine

®

:

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

Table of Contents

Section Title

Page #

!

TIP

NOTE

TIP - for ease of installation.

NOTE - take note of special

feature; additional information.

INCORRECT -

not recommended.

CORRECT -

recommended.

REQUIRED -

requires special attention;

signifies a warning.

Average Installation Time

2 hrs

Enclosure Installation Dimensions

Required Support Information

Factory Parts Information (per model size)

Troubleshooting

Product Maintenance & Maintenance Checklist

Setting the Adjustable Hinges

Installation Overview

Installation Steps

Parts List

Detailed Diagram of Unidoor Toulon Enclosure Door Components

Tools

Model-specic Preparation Steps

Important Information about your new shower door

40-44

39

38

14

37

15-35

12-13

11

10

9

4-8

3

2

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

Required Support

2

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

5/8" (16mm)

space beneath

installed

door glass

2” X 6”

D

ds

ouble

Stu

or

55-5/8”

(1413mm)

8-1/2”

(216mm)

threshold

72”

(1829mm)

from threshold

64-1/8”

(1629mm)

from threshold

Wood reinforcement behind the wall is required for the installation of this door.

Be sure there are studs or wood blocking in the wall where the door hinges

will be installed. If none exists, install double studs OR 2”x 6” wood blocking

between the studs where the hinges will attach to the wall.

Do not use wall anchors or toggle bolts to install the door hinges.

®

!

This product should be installed by someone familiar with the

construction requirements for this type of product and the care

necessary for the safe installation and operation of the product.

WARNING DISCLOSURE STATEMENT

I

MPORTANT

• DreamLine® reserves the right to alter, modify or redesign products any time without

prior notice for product improvement and customer experience. Please refer to the

model’s web page on DreamLine.com for the latest technical drawings, installation

manuals, warranty information or additional product details.

• This product should be installed by someone familiar with the construction re

quirements

for this type of project and the care necessary for the safe installation and operation of

the product.

• The safety of any installation is the responsibility of the installer.

• Professional installation recommended.

(All Models)

• Professional installation required.

(Enigma Series)

• To prevent damage or serious injury, Do Not lean against the installed panel/door/glass.

• To prevent damage or serious injury: Do Not attempt to lift or move a heavy lite of glass

alone. Use an assistant and/or a professional grade glass suction cup.

• The installation of some models may require drilling down into the threshold. Contact the

manufacturer of the base, tub, or threshold materi

al with any questions regarding the

drilling of holes into their product.

• All drawings in this installation manual are for illustrative purposes only and are not drawn

to scale.

T

EMPERED GLASS WARNING

• Your Shower Door Glass Could Shatter Without Warning if Improperly Installed or

Mishandled

• Do Not install or operate a shower door if the glass has chipped corners, slivered edges or

is otherwise damaged and/or has been dropped or banged into a hard surface such as

tile, marble or glass.

• The main causes of tempered glass breakage are:

o Improper handling, storage or installation

o Misuse/abuse

o Lack of maintenance

o Failure to replace damaged glass

o Improper handling during storage, unpacking and installation:

o Corners and edges are the most susceptible area to damage on a lite of tempered

glass and should be protected and handled with care during storage, unpacking,

installation and operation. A concentrated point of pressu

re or impact with a surface

harder than itself may cause the tempered glass to shatter. The tempered glass may

release immediately, within several hours or even days later.

o Incorrect installation of door hardware, rollers, hinges, channels, stopper or glass:

o Improper installation may include: loose hardware and/or lack of proper gaskets

between the hardware and glass. Additionally, improper al

ignment of guide rails, wall

profiles or other hardware during installation or operation may place stress on the

glass edges and cause it to break.

o This product must be installed by a professional and experienced installer familiar with

the safe handling of tempered glass.

o Improper use of this product:

o Aggressively opening or closing the door may cause trauma to the glass, which can

lead to

breakage. This may occur immediately or hours or even days later.

o The shower door hardware and glass should be inspected periodically:

 Instruct the homeowner how to perform a periodic inspection of the shower

hardware and glass - some minor adjustments may be necessary based upon

the use (or misuse) of the shower door. Ensure that the hardware remains tight

and that the door alignment and o

peration are correct. Any adjustments

should be made upon discovery to prevent damage to the product.

 Additional considerations should be given to the installation of frameless

tempered glass products in households with young children or an elderly

person due to an increased chance of improper handling. In such cases,

alternatives such as shower curtains or grab bars should be considered.

GENERAL PREPARATION

• After opening all boxes and packages, read this introduction carefully. Check that all the

items are included in the package by marking off the components on the “Detailed

Diagram of Product Components” page. Examine all boxes and packages for shipping

damage. If the unit has been damaged, has a finishing defect, or is missing parts; please

contact our Customer Support depart

ment within

3 business days of the delivery date. Please note that DreamLine® will not replace any

damaged products or missing parts free of charge after 3 business days or if the

product has been installed. Please contact DreamLine® if you have any questions.

• Please note that you should refer to your local building codes with questions on

installation compliance standards. Building and plumbi

ng codes may vary by

location, and DreamLine® is not responsible for code compliance standards for your

project and will not accept any returns.

• If this unit is going to be installed in a new construction, install all the required plumbing

and drainage before installing the shower. Use a competent and licensed (if required

by local code) plumber for all plumbing installation.

• Make sure that prior to beginning the installation, the surfaces are leveled and solid and

will be able to support the t

otal weight of the unit. Also make sure the walls are at right

angles. Irregular installation surface level, radius corners or improper angle of side walls

will result in serious problems for your installation. Please note that some adjustments an

d

drilling will be necessary during the installation process.

• Protect all primary surfaces of the product during installation. Never set your glass down

directly onto a tile floor. Leave corner protectors in place until it is necessary to remove

them. Always use a piece of wood or cardboard to protect the bottom edge and corners

of the glass prior to and during installation.

• This unit must be i

nstalled upon a finished threshold and against finished walls.

•

DreamLine

®

shower doors are not designed to be installed into a fiberglass surround due

to the radius corners and lack of a solid surface to mount the hardware.

WARNING: TO AVOID THE RISK OF DAMAGE OR INJURY:

• Follow all recommendations and requirements as shown in the installation

instructions.

• Perform a thorough inspection of the glass and all parts for any damage prior to

installation. Any damage to tempered glass can cause breakage.

Do Not install damaged glass!

• Do Not install or operate a shower or tub door if the glass has chipped corners, sl

ivered

edges or is otherwise damaged. Do Not install or operate a shower or tub door that has

been dropped or banged into a hard surface such as tile, marble or glass.

• CAUTION: Contact with any hard surface can damage tempered glass and cause it to

shatter.

• This product uses tempered glass. Glass cannot be cut after it has been tempered.

Do Not attempt to cut tempered glass.

• DreamLine

®

Glass Shower doors, Tub doors, Inline panels, and Return panels can shatter

due to improper handling or lack of maintenance. Conduct periodic inspections of glass

and all parts for possible damage, missing or loose parts.

• Always wear proper safety equipment such as: safety goggles, work gloves and

appropriate footwear during the installation process.

• WARNING. Risk of leakage and/or damage. Follow

all instructions regarding the

application of silicone sealant or caulk. Allow 24 hours for the sealant to cure before the

initial use of the shower or tub product. Follow the silicone manufacturer’s

recommendations regarding the use of their product.

• Thoroughly read these instructions before installing or using this product.

• Leave this manual for the end-user of the product.

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 3

®

Enclosure Installation Dimensions

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

4

Symbol Legend

TIP - for ease of installation.

34-3/8”

34-7/16”

33-7/8”

34-7/16”

33-7/8”

threshold

34-3/8”

Finished wall surface

Outside surface

of the door glass

Finished wall surface

return panel

Inline Panel U-Channel =

Glass Width +1/16” = 9”

45° miter

Bottom U-Channel

cut sizes

33-7/8”

Return Panel

Door

Return Panel

Outside surface

of the return

panel U-Channel

Return Panel

Bottom U-Channel =

Glass Width + 5/8”

= 34-7/16” tip to tip

w/one 45-degree miter

door

inline panel

UNIDOOR TOULON ENCLOSURE 34 x 34 x 72

SHEN-2434340-89

Right-side return panel installation shown as an example

Miter cuts shown for

right-hand return panel

installation

®

Enclosure Installation Dimensions

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

5

39-7/8”

34-7/16”

39-7/8”

threshold

Finished wall surface

Outside surface

of the door glass

Finished wall surface

34-3/8” 34-7/16”

Inline Panel U-Channel =

Glass Width +1/16”= 15-15/16”

45° miter

Bottom U-Channel

cut sizes

39-7/8”

34-3/8”

Outside surface of the

return panel U-Channel

Return Panel

Door

Return Panel

Bottom U-Channel =

Glass Width + 5/8”

= 34-7/16” tip to tip

w/one 45-degree miter

return panel

door

inline panel

UNIDOOR TOULON ENCLOSURE 40 x 34 x 72

SHEN-2434400-89

Right-side return panel installation shown as an example

Miter cuts shown for

right-hand return panel

installation

®

Enclosure Installation Dimensions

6

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

UNIDOOR TOULON ENCLOSURE 46 x 34 x 72

SHEN-2434460-89

Right-side return panel installation shown as an example

45-7/8”

34-7/16”

45-7/8”

threshold

Finished wall surface

Outside surface

of the door glass

Finished wall surface

34-3/8”

34-7/16”

Inline panel U-Channel =

Glass Width +1/16” = 15-1/2”

45° miter

Bottom U-Channel

cut sizes

45-7/8”

34-3/8”

Outside surface of the

return panel U-Channel

Return Panel

Door

Return Panel

Bottom U-Channel

= Glass Width + 5/8”

= 34-7/16” tip to tip

w/one 45-degree miter

L

return panel

door

inline panel

Miter cuts shown for

right-hand return panel

installation

®

Enclosure Installation Dimensions

7

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

®

UNIDOOR TOULON ENCLOSURE

52 x 34 x 72

SHEN-2434520-89

Right-side return panel installation

shown as an example

tooltip

51-7/8”

34-7/16”

51-7/8”

threshold

Finished wall surface

Outside surface

of the door glass

Finished wall surface

34-3/8”

34-7/16”

Inline Panel U-Channel =Glass

Width +1/16”= 22-1/8”

45° miter

Return Panel

Bottom U-Channel

= Glass Width + 5/8”

Bottom U-Channel

cut sizes

= 34-7/16” tip to tip

w/one 45-degree miter

51-7/8”

34-3/8”

Outside surface of the

return panel U-Channel

Return Panel

Door

Return Panel

return panel

door

inline panel

Miter cuts shown for

right-hand return panel

installation

®

Enclosure Installation Dimensions

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

8

®

UNIDOOR TOULON ENCLOSURE

58 x 34 x 72

SHEN-2434580-89

Right-side return panel installation

shown as an example

= 34-7/16” tip to tip

w/one 45-degree miter

57-7/8”

34-7/16”

57-7/8”

threshold

Finished wall surface

Outside surface

of the door glass

Finished wall surface

34-3/8”

34-7/16”

Inline panel U-Channel =

Glass Width +1/16” = 29-7/8”

45° miter

Return panel

Bottom U-Channel =

Glass Width + 5/8”

Bottom U-Channel

cut sizes

34-3/8”

Outside surface of the

return panel U-Channel

Miter cuts shown for

right-hand return panel

installation

Return Panel

Door

Return Panel

return panel

door

inline panel

®

Model Specific Preparation

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

9

®

1/4” Max

Out-of-Plumb

adjustment on

door-side wall

1/2” Max Out-of-Plumb

adjustment within the

u-channel on return

panel wall

Thresholds must be level

!

±

0

.0

±

0

±

0

.0

±

0

Check walls and threshold with a level

1”

minimum

at threshold

Professional Installation

recommended.

Certied Professional

!

This model is reversible for right or left-hand door installation. The

left-hand door installation is shown as an example throughout this

manual. For the right-hand door installation, reverse the orientation

of the steps as shown to install the door is on the right.

TIP

!

DO NOT attach the handle and/or towel bar to the door glass until

instructed.

DO NOT attempt to use the handle/towel bar to lift the glass during

installation. This may result in damage to the glass and/or serious injury.

Always use a professional grade glass suction cup and an assistant.

Find a local Certified

Installer at Dreamline.com

Right-hand doorLeft-hand door

Left-hand door with right hand

return panel installation shown

as an example

door

®

Tools

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

10

®

Clean Rags

Soft Head

Hammer

Ø1/4"

(6mm)

Drill Bit

Ø1/8"

(3mm)

Drill Bit

Ø5/16"

(8mm)

Level

Measure

Tape

Pencil

Drill

Power

Phillips

Screwdriver

Silicone

Hacksaw

Miter saw

Metal File

Scissors

Razor Knife

Mineral

Spirits

S

P

I

R

I

T

S

M

I

N

E

R

A

L

Painter’s Tape

NOTE

TIP

To be sure that the correct model size has been ordered, measure

the finished opening before proceeding with the installation.

TIP

Cover the shower/tub drain with tape prior to installation to

prevent the loss of screws or small parts.

TIP

To prevent stripping the screw heads, set power

drill to a low setting when installing screws.

NOTE

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the Detailed

Diagram on page 11 and the included packing list in this manual as a reference. Before

discarding the carton, check for small hardware bags that may have fallen to the bottom of

the box. If any parts are damaged or missing, please contact DreamLine

®

for replacement.

The shipping boxes may contain extra parts not used in your model configuration.

Retain these installation instructions for future reference.

Professional-grade

Glass suction cup

Drill Bit

Ø3/16"

(5mm)

®

Detailed Diagram of Unidoor Toulon Enclosure Door Components

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 11

06

09

23

29a

29b

05

04

02

07

34

30

01

11a

11b

19

®

Parts List

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 12

®

Door Glass

01

x1

Sweep Vinyl Seal

07

x1

Hinge-Side Vinyl Seal

06

x1

Inline Panel U-Channel

(Bottom)

29b

x1

Hinge

Handle

05

x2

02

x1

Inline Panel Glass

11a

x1

Vertical U-Channel

09

x1

Strike Vinyl Seal

19

x1

PVC Hinge Spacers*

*optional - used for

out-of-plumb hinge wall only

31

x4

1mm (x2)2mm3mm

ST5 x 70 Countersunk

Screw

04

x8

ST4.2 x 40

Countersunk Screw

23

x08

ø

5/16” Wall Anchor

13

x08

BOX #1: SHDR-24##720-89 (##=34/40/46/52/58)

34

x1

PVC Glass Spacer 0.5

mm

(x 36” roll)

®

Parts List

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

13

®

Return Panel Glass

11b

x1

Return Panel U-Channel

(Bottom)

29a

x1

09

x1

ST4.2 x 40

Countersunk Screw

23

x08

ST4.2 x 40

Countersunk Screw

23

x08

ø

5/16” Wall Anchor

13

x08

ø

5/16” Wall Anchor

13

x08

BOX #2: SHDR-3234721-89

BOX #3: SHDR-AC2403-09

Corner Bracket

30

x1

Return Panel U-Channel

(Bottom)

29a

x2

Vertical U-Channel

(Only use one)

09

x1

NOTE:

The U-channels in the AC2403 Accessories

box are the only U-Channels necessary for

the installation of this model.

Discard or recycle any unused U-Channels

or hardware.

!

Vertical U-Channel

34

x1

PVC Glass Spacer 0.5

mm

(x 36” roll)

34

x1

PVC Glass Spacer 0.5

mm

(x 36” roll)

®

Installation Overview

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019

14

®

See Steps 6 & 7 on Pages 21-22

Fig 1

71”(1803.4mm)

vertical u-channel =

model height =

72”(1829mm)

90°

34-7/16”(874.7mm)

inline panel glass W + 1/16”

Dimensions as measured from the nished

wall to the outside of the U-Channel

A

B

C

Hinge Wall Plumb tolerance:

+1/4” max (out-of-plumb)

- 0” max (opening for door area

cannot be less than nominal door

size: see Table A)

Hinge Wall

!

NOTE: Refer to Table A

This space MUST be

no less than the nominal

door size as measured from

the wall to the U-Channel

3

4

-

3

/

8

”

Right-side return panel installation shown

Cut Vertical U-Channel = 71”

Cut Return Panel Bottom U-Channel:

= 34-7/16” w/45° miter

Cut Inline Panel Bottom U-Channel:

= Glass Width (+) 1/16” w/45° miter

Install the

Vertical

U-Channel

on top of

the Bottom

U-Channel

Wall

24-7/8”

Nominal Door size

Model Size SKU

23-7/8”

30-3/8”

29-3/4”

28”

SHEN-2434340-89

SHEN-2434400-89

SHEN-2434460-89

SHEN-2434520-89

SHEN-2434580-89

Table A

(Left-side door

installation shown)

Place the U-Channels (#09 and #29) on the wall and threshold at the model dimensions based on your

model size. as shown in the “Enclsoure Installation Dimensions” (Pages 4-8).

Note that the space for the door area must be no less than the “nominal door size” (Table A)

®

Installation Steps

Tools NeededParts Needed

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 15

Remove

from top

of glass

* 5/8” spacers

are provided with the

door glass

Hinge edge flush

with glass edge

Fig 2

x2

05

01

x1

5/8” spacers*

2mm gasket

outside

use for installation

1

®

Tools Needed

Parts Needed

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 16

01

x1

5/8” spacers

Fig 2a

2

®

Tools NeededParts Needed

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 17

Maximum

Adjustment= 1/4”

x4

1mm2mm3mm

1

2

3

4

inside

outside

Fig 2b

±0.00”

31

Use the PVC hinge spacers

to bring your level to plumb

± 1/4”

1/4” Maximum adjustment

for Out-Of-Plumb on the

hinge wall

04

x8

x2

05

Optional

PVC hinge spacer

outside

Option for out-of-plumb hinge wall: Use the PVC hinge spacers (#31) ONLY as necessary to correct for an

out-of-plumb wall condition on the hinge-side wall (1/4” max!). Use the PVC hinge spacers (#31) behind one hinge plate

to plumb the door. Do not exceed 1/4” of adjustment. (Fig 2b)

!

®

Parts Needed Tools Needed

Unidoor Toulon Shower Enclosure Manual Ver 1 05/2019 18

Hinges must be attached to wood support

behind the wall. Do not use anchors or

toggle bolts to secure hinges.

NOTE

See Note Below

x2

Fig 3

05

Be sure the

Door Glass

is plumb

outside

3

La pagina sta caricando ...

DreamLine SHEN-2434580-89 Guida d'installazione

Questo manuale è adatto anche per

DreamLine SHEN-2434580-89 Guida d'installazione

in altre lingue

Altri documenti