Panasonic SCPM19 Manuale utente
- Categoria
- Set audio per la casa
- Tipo
- Manuale utente
CD Stereo System
Operating Instructions
Model No. SC-PM19
RQT7369-1B
Table of contents
Before use
Supplied accessories ............................. 3
The remote control ................................. 4
Placement of speakers ........................... 4
Connections ............................................ 5
Front panel controls ............................... 7
Demo function ......................................... 8
Setting the time ....................................... 8
Convenient functions ............................. 8
Listening operations
The radio: manual tuning ....................... 9
The radio: preset tuning ......................... 10
CDs ........................................................... 11
Enjoying MP3 .......................................... 16
Cassette tapes ......................................... 20
Recording operations
Before recording ..................................... 21
Recording the radio ................................ 21
Recording CDs ........................................ 22
Auto-off function ..................................... 22
Timers and others
Using the timers ...................................... 23
Using the sound quality settings .......... 25
Enhancing the sound quality ................. 25
Using an external unit ............................ 25
Reference
Troubleshooting guide ........................... 26
Specifications ............................. Back cover
Maintenance ............................... Back cover
When moving the unit ............... Back cover
Note:
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
E EB GN
RQT7369-1B_FC 17/2/04, 4:51 pm1
Before use
2
RQT7369
Safety precautions
Placement
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and excessive
vibration. These conditions can damage the cabinet and
other components, thereby shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid
distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can
overload the unit and cause a fire.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other place
where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire
or electric shock. Do not pull, bend, or place heavy items on
the lead.
Grasp the plug firmly when unplugging the lead. Pulling
the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if sprayed into the
unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any
other problem that is not covered in these instructions
occurs, disconnect the AC mains lead and contact your
dealer or an authorized service center. Electric shock or
damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the
power source if it is not to be used for a long time.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
system.
System SC-PM19
Main unit SA-PM19
Speakers SB-PM19
Side of product
Inside of product
Tuotteen sisällä
Produktets innside
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the
product and the mobile telephone.
Before use
The socket outlet shall be installed near the equipment
and easily accessible or the mains plug or an appliance
coupler shall remain readily operable.
Laite tulee asettaa lähelle verkkopistorasiaa ja
pistokkeen täytyy olla sellaisessa asennossa, että siihen
on helppo tarttua ongelman sattuessa.
Utstyret bør plasseres i nærheten av AC-stikkontakten,
og støpslet må være lett tilgjengelig hvis det skulle
oppstå problemer.
RQT7369-B_02-03_EN 28/1/04, 10:13 am2
3
RQT7369
Before use
Supplied accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses
when asking for replacement parts.
AC mains lead ............................................. 1 pc.
AM loop antenna ......................................... 1 pc.
(N1DAAAA00001)
FM indoor antenna ...................................... 1 pc.
(RSA0007-L)
Remote control transmitter ........................ 1 pc.
(EUR7711150)
Remote control batteries ......................... 2 pcs.
R6, AA, UM-3
Antenna plug adaptor . . . . . . . . . . . . . . . . . 1 pc.
For the United Kingdom only (K1YZ02000013)
For the United Kingdom and Republic of Ireland
www.panasonic.co.uk (for UK customers only)
• Order accessory and consumable items for your product with
ease and confidence by telephoning our Customer Care
Centre Mon–Friday 9:00 am–5:30 pm.
(Excluding public holidays.)
• Or go on line through our Internet Accessory ordering
application.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
• It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic
PC software related products only.
For Republic of Ireland, please use the Customer Care
Centre number listed above for all enquiries.
For all other product related enquiries, please use the
Customer Care Centre numbers listed above.
shop@
Caution for AC Mains Lead
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark m or the BSI mark o on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD
BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE
EARTH SYMBOL
nn
nn
n OR COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Fuse cover
Figure A Figure B
2. Replace the fuse and close or attach the fuse cover.
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A Figure B
For the United
Kingdom
(RJA0053-3X)
For Australia
and N.Z.
(K2CJ2DA00010)
For others
(K2CQ2CA00002)
RQT7369-B_02-03_EN 19/1/04, 7:06 pm3
4
RQT7369
Before use
A The remote control
■ Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
■ Use
Aim at the remote control sensor, avoiding obstacles, at a
maximum range of 7 m (23 feet) directly in front of the unit.
Refer to page 7 for the remote control sensor position.
B Placement of speakers
Speakers are designed identically so that no left or right channel
orientation is necessary.
Notes
• Keep your speakers at least 10 mm away from the system
for proper ventilation.
• These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
• To avoid damage to the speakers, do not touch the speaker
cones if you have taken the nets off.
R6, AA, UM-3
RQT7369-B_04-08_EN 19/1/04, 7:09 pm4
5
RQT7369
Before use
Connections
Plug the AC mains lead into a household mains socket only
after all other connections have been made.
• To prepare the AM loop antenna wire and speaker cords, twist
the vinyl cover tip and pull off.
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where
radio signals are received with the least amount of
interference.
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 6)
2 Connect the AM loop antenna.
Stand the antenna up on its base. Keep loose antenna cord
away from other wires and cords.
3 Connect the speaker cables.
Confirm the colours of the tags on the ends of the cords.
For White tags:
Connect cords to grey terminals.
For Blue, Black and Red tags:
Connect cords so tag colours match the terminal
colours.
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Caution
• Use the speakers only with the recommended
system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in
the risk of fire. Consult a qualified service person
if damage has occurred or if you experience a
sudden change in performance.
• Do not attach these speakers to walls or ceilings.
4 Connect the AC mains lead.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON
PAGE 3 BEFORE CONNECTION.
Insertion of Connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
Connector
Approx. 3.5 mm
Note
The included AC mains lead is for use with this unit only. Do
not use it with other equipment.
(R)
(L)
4
2
1
3
1
AM ANT
FM ANT
EXT
LOOP
75
Adhesive
tape
FM indoor
antenna
2
AM ANT
FM ANT
EXT
LOOP
75
AM loop antenna
3
R
L
HIGH (6
)
LOW (6
)
Red (+)
Grey (+)
Blue (–)
Black (–)
White
Blue
Red
Black
a
b
1
3
2
To household
mains socket
RQT7369-B_04-08_EN 19/1/04, 7:09 pm5
6
RQT7369
Before use
AM ANT
FM ANT
EXT
LOOP
75
FM outdoor antenna
(not included)
75 coaxial
cable
(not included)
(Only for the U.K.)
Use the antenna
plug adaptor
(included).
AM ANT
FM ANT
EXT
LOOP
75
AM outdoor antenna
(not included)
AM loop antenna
(included)
5-12 m
AUX
(L)
(R)
Analo
g
ue pla
y
er (not included)
“LINE OUT”
position
Rear panel of this unit
R L
Connections
Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building,
etc.
A FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
Note
An outdoor antenna should be installed by a qualified technician
only.
B AM outdoor antenna
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along
a window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning.
Never use an outdoor antenna during a lightning storm.
External unit connections
• Make sure that the power supply for all components has been
turned off before making any connections.
• For details, refer to the operating instructions of the unit which
is to be connected.
• All peripheral components and cables sold separately.
C Connecting analogue equipment
This example shows how to connect an analogue player with a
PHONO OUT/LINE OUT switch.
When units other than those described are to be connected,
please consult your audio dealer.
Note
• Only an analogue player with a built-in phono equalizer can
be connected.
• Set the switch to the “LINE OUT” position at the back of the
analogue player.
RQT7369-B_04-08_EN 19/1/04, 7:10 pm6
7
RQT7369
Before use
Front panel controls
Main unit
Cassette lid
Cassette open button (OPEN 0) ............................... 20
Standby/on switch (y¥I) ................................................ 8
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC
mains supply.
Super sound EQ button (S.SOUND EQ) ................... 25
Aux button (AUX) ........................................................ 25
Tuner/band select button (TUNER/BAND) .................. 9
CD skip/search, tape fast-forward/rewind/TPS, tune/
preset channel select, time adjust buttons
(
44
44
4/REW/4,
33
33
3/FF/¢) ............................... 9, 11, 20, 23
Stop and demonstration button
(STOP 7, –DEMO) ................................................... 8, 11
Checking CD position (CD CHECK) .......................... 12
CD trays
Remote control sensor
Display
Album/track selection button
( ALBUM/TRACK ) ................................................. 16
Recording start/pause button (¶/8 REC) ................. 21
CD play/pause button (CD 3/8) ................................ 11
CD change button (0 CD CHANGE) ......................... 12
CD tray open/close button (0 OPEN/CLOSE) .......... 11
Volume control (VOLUME DOWN, UP) ........................ 9
Tape play button (TAPE 3) ........................................ 20
Headphone jack (PHONES) ........................................ 25
CD selection (CD 1~CD 5) .......................................... 12
Remote Control
Buttons such as function in exactly same way as the buttons
on the main unit.
Auto off/Sleep timer button
(AUTO OFF, SLEEP) .............................................. 22, 24
Disc button (DISC) ...................................................... 13
CD Program, tuner preset button
(PROGRAM) .......................................................... 10, 15
Play mode select button (PLAY MODE) ................ 9, 13
Use this for selecting CD play mode, tune mode and FM
mode.
Repeat button (REPEAT) ............................................ 14
Delete button (DEL) .................................................... 18
Album selection button (ALBUM, ) .................... 16
Intro button (INTRO) ................................................... 17
Marker memory/recall button (MARKER) ................. 19
Shift button (SHIFT)
To use functions labelled in orange :
While pressing [SHIFT], press the corresponding button.
For buttons [AUTO OFF], [CLOCK/TIMER],
[
˚˚
˚˚
˚PLAY/REC] and [SURROUND].
Surround, Super sound EQ button
(SURROUND, S.SOUND EQ) ...................................... 25
Play timer/record timer/Dimmer button
(
˚˚
˚˚
˚PLAY/REC, DIMMER) .......................................... 8, 23
Clock/timer/CD display/RDS display button
(CLOCK/TIMER, DISPLAY) ................................. 8, 9, 14
Numbered, character buttons
(
h
10, 1-9, 0, A-Z, SPACE!”#) ................................. 10, 18
Stop/clear button (7 CLEAR) ..................................... 15
Enter button (ENTER) ................................................ 18
Title search mode select button
(TITLE SEARCH) ........................................................ 18
Muting button (MUTING) ............................................. 8
Preset EQ/Manual EQ button (SOUND) ................... 25
PHONES
REW
FF
OPEN/
CLOSE
CD
CHANGE
CD
CHECK
DOWN
VOLUME
ALBUM/
TRACK
UP
AUX
AC IN
S.SOUND EQ
CD 1 CD 2 CD 3 CD 4
CD 5
STOP
TUNER BAND
CD
TAPE
DEMO
OPEN
REC
4
3
6
7
8
!
"
9
2
1
-
$
#
&
%
(
,
+
)
~
5
CD 1 CD 2 CD 3 CD 4 CD 5
.
12 3
45
6
78 9
0
10
3
7
6
?
/
:
^
_
|
{
(
,
8
+
>
]
;
<
=
@
[
\
}
Top of the unit
RQT7369-B_04-08_EN 19/1/04, 7:10 pm7
8
RQT7369
Before use
A Demo function
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON”.
Press and hold [STOP 7, –DEMO].
The display changes each time the button is held down.
DEMO OFF DEMO ON
While in the standby mode, select “DEMO OFF” to reduce power
consumption.
B Setting the time
This is a 24-hour clock.
The example shows how to set the clock for 18:30.
1 Press [
yy
yy
y] to turn the unit on.
2 Press [SHIFT] + [CLOCK/TIMER] to display
“CLOCK”.
Every time you press the button:
CLOCK PLAY
Original display
REC
3 Within 5 seconds
Press and hold [
44
44
4/REW/4] or [
33
33
3/FF/¢] to set
the time.
4 Press [SHIFT] + [CLOCK/TIMER].
Displaying the clock:
Press [SHIFT] + [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Note
The clock may lose or gain some time over a period.
Readjust if necessary.
C Convenient functions
To dim the display panel
Press [DIMMER].
The display brightness will be reduced except for [AC IN]
indicator.
To cancel, press [DIMMER] again.
To mute the volume
Press [MUTING].
To cancel, press [MUTING] again.
Muting can also be cancelled by lowering the volume all the
way to “--dB”.
When the system is turned off, the muting operation will be
automatically cancelled.
DEMO
STOP
,
1
3
2 4
1
2
SHIFT
CLOCK/
TIMER
3
4
/REW
3
/FF
4
SHIFT
CLOCK/
TIMER
DIMMER
MUTING
RQT7369-B_04-08_EN 27/1/04, 9:48 am8
Listening operations
9
RQT7369
The radio: manual tuning
1 Press [TUNER/BAND] to select:
FM AM
2 Press [PLAY MODE] to select “MANUAL”.
PRESET MANUAL
3 Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the
frequency of the required station.
“ST” is displayed when a stereo FM broadcast is being
received.
4 Adjust the volume.
Auto tuning
Press and hold [
44
44
4/REW/4] or [
33
33
3/FF/¢] for a moment. The
unit begins auto tuning when the frequency starts changing
rapidly and stopping when it finds a station.
• To cancel, press [
44
44
4/REW/4] or [
33
33
3/FF/¢] again.
• Excessive interference may interrupt auto tuning.
A To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel, press and hold [PLAY MODE] again.
MONO is also cancelled if the frequency is changed.
For normal listening, turn off “MONO”.
B RDS broadcasting (For Europe)
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals,
“RDS” will light up on the display.
Displaying the name of a broadcasting station or a program
type
Press [DISPLAY].
Every time you press the button:
Frequency display Station Name (PS) Program type (PTY)
4
1
3
2
1
TUNER/BAND
2
PLAY MODE
3
REW
FF
4
DOWN
VOLUME
UP
PLAY
MODE
RDS
RDS
PS
RDS
PTY
DISPLAY
Notes
• RDS displays may not be available if reception is poor.
❈
“M.O.R M”=“Middle of the road music”
• Sound is momentarily interrupted if you load/unload tapes
while listening to an AM broadcast.
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Program type displays
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R M
❈
LIGHT M
CLASSICS
OTHER M
WEATHER
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
RQT7369-B_09-15_EN 15/1/04, 6:25 pm9
Listening operations
10
RQT7369
The radio: preset tuning
There are two methods of pre-setting stations:
Automatic presetting: Stations the tuner can receive are
preset automatically.
Manual presetting: You can select the stations to preset
and the order they are preset in.
Up to 15 stations can be preset for FM and AM bands.
Press [TUNER/BAND] to select “FM” or “AM”.
A Automatic presetting
Auto presetting for AM and FM each.
1 Tune to the frequency where presetting is to
begin (\ page 9).
2 Press and hold [PROGRAM].
Auto presetting starts and the last station memorized is
tuned in.
B Manual presetting
Preset the stations one at a time.
1 Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to tune to the
required station.
2 Press [PROGRAM].
3 Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
C Selecting channels
1 Press numeric buttons to select the channel.
For channels 10 to 15 press [
h
10], then the two digits.
OR
Press [PLAY MODE] to select “PRESET”.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the
channel.
2 Adjust the volume.
AM allocation setting
By main unit only
Each country allocates broadcast bands according to their
particular needs.
This system can also receive AM broadcasts allocated in 10
kHz steps.
To change the step (9kHz ↔ 10kHz)
Preparation:
Press [TUNER/BAND] to select “FM”.
Press and hold [TUNER/BAND].
After a few seconds the display changes to a flashing display
of the current minimum frequency.
Continue to hold [TUNER/BAND] down.
When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
Note
After changing the “allocation” setting, the frequencies you
previously preset in the memory will be cleared.
PROGRAM
1
2
3
1
4
/REW
3
/FF
2
PROGRAM
3
CD
1
2
1 or
PLAY MODE
4
/REW
3
/FF
2
VOL
VOL
VOL
VOL
RQT7369-B_09-15_EN 16/2/04, 9:38 am10
Listening operations
11
RQT7369
CDs
This unit can play CD-DA (digital audio) format audio CD-R
and CD-RW that have been finalized (a process performed after
recording that enables this unit to play audio CD-R and CD-
RW).
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you can
select and listen to the CD in a particular tray. See the section
on All-Disc play (\ page 13) for information on how to listen to
all the CDs one after another.
Listening to CD on a single tray
1 Press [0 OPEN/CLOSE] to insert the CD on the
disc tray. Press again to close.
2 Press [CD 3/8] to start play from the first track.
The player stops after playing the last track.
3 Adjust the volume.
A CD selection and care
Only play CDs with COMPACT disc DIGITAL AUDIO trademark.
(see )
Do not;
• Use irregularly shaped CDs. ( )
• Attach extra labels and stickers.
• Use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. ( )
• Attach scratch-proof covers or any other kind of accessory.
• Write anything on the CD.
• Clean CDs with liquids. (Wipe with a soft, dry cloth.)
• Use CDs printed with label printer available on the market.
To prevent damage
Always observe the following points.
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or when
loaded. Always unload all CDs before moving the system.
• Do not put anything except a CD in the tray.
• Do not use cleaning CDs or CDs which are badly warped or
cracked.
• Do not disconnect the power mains lead from the household
mains socket during CD changing operation.
To
stop the disc
pause play
skip tracks
search through
tracks
view CD indicator
start one touch play
Action
Press [STOP 7 ,–DEMO].
Press [CD 3/8]. Press again to resume
play.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Press and hold [
44
44
4/REW/4] or [
33
33
3/FF/
¢] during play or pause.
The CD indicator on the display lights
whenever the tray is in the playing
position.
If the unit is in standby mode and a CD
is loaded, press [CD 3/8] or [CD 1] ~
[CD 5]. The unit will come on
automatically and play will start.
2
1
3
(CD 1) ~
(CD 5)
DEMO
STOP
,
4/REW/4,
3/FF/¢
1
0
OPEN/
CLOSE
2
CD 6
3
DOWN
VOLUME
UP
a
b
c
RQT7369-B_09-15_EN 15/1/04, 6:25 pm11
Listening operations
12
RQT7369
CDs
Listening to a CD placed in a specific tray
Preparation:
Press [CD 3/8] and then [STOP 7, –DEMO].
Placing a CD in your desired tray
1 Press [0 CD CHANGE].
2 (Within about 10 seconds)
Press [CD 1] ~ [CD 5] and insert the CD on the
tray.
Press [0 CD CHANGE] again to close.
Repeat steps 1 and 2 to insert up to 5 CDs.
Listening to the CD placed in a specific tray
3 Press [CD 1] ~ [CD 5] to start play.
The player stops after playing the last track.
4 Adjust the volume.
To remove the CD
You can change the CDs in the other trays while one CD is
playing (except in All-Disc Random play or program play).
Press [0 CD CHANGE].
Press [CD 1] ~ [CD 5].
Press [0 CD CHANGE] again to close the tray.
Press [CD CHECK].
The tray with a CD being played will not open.
If the player is stopped, all trays will open.
Press [CD CHECK] again to close the trays.
• Do not remove or insert CDs during a CD check.
• Do not pull out the trays during a CD check.
• 8 cm CDs cannot be checked.
Marking a track
You can mark one track each on the 5 discs loaded so that you
can start play from them later. (\ page 19)
Disc tray
Label must face upward.
Tray
number
CD CHECK
STOP
7
,
–
DEMO
CD
6
1
0
CD
CHANGE
2
CD 1 CD 2 CD 3 CD 4
CD 5
0
CD
CHANGE
3
CD 1 CD 2 CD 3 CD 4
CD 5
4
DOWN
VOLUME
UP
CD
CHECK
CD CHECK
A
To check which CDs are in the trays
(CD CHECK)
RQT7369-B_09-15_EN 15/1/04, 6:25 pm12
Listening operations
13
RQT7369
4
14
1
2
3
1
CD 6
➞
CLEAR
2
PLAY MODE
3
DISC
123
45
ABC
DEF
GHI JKL
4 or
CD 6
CDs
Listening to specific CDs and tracks
(CD Play Mode function)
1 Press [CD 3/8] and then [7 CLEAR].
2 Press [PLAY MODE] to select your desired mode.
ALL-DISC1-DISC
1-RANDOMA-RANDOM
1-TRACK
If A-RANDOM was selected in this step, press the play
button.
3 Press [DISC] and (within 10 seconds) press [1]-
[5] to select the disc.
The CD starts if 1-DISC, ALL-DISC or 1-RANDOM was
selected in step 2.
4 • When 1-TRACK is selected in step 2
Select the track with the numeric buttons to
start play.
To select track 10 or over, press [
h
10] then the two digits.
• When 1-RANDOM or A-RANDOM is selected in
step 2
Press [CD 3/8] to play CD.
When playback ends
The current play mode will be retained.
Final disc
For example, if play starts from disc 4, disc 3 will be the “final
disc”.
Order of progression:
Disc 4➞5➞1➞2➞3
Notes
• You can use the CD Play Mode function together with repeat
play.
• During 1-RANDOM play or A-RANDOM play, you cannot skip
to tracks which have already been played.
• During 1-RANDOM play or A-RANDOM play, you can search
forward or backward only within the current track.
Mode
1-DISC
ALL-DISC
1-TRACK
1-RANDOM
A-RANDOM
To play
one selected disc.
all loaded discs in succession from the
selected disc to the final disc .
one selected track on the selected disc.
one selected disc in random order.
all loaded discs in random order.
RQT7369-B_09-15_EN 15/1/04, 6:25 pm13
Listening operations
14
RQT7369
CDs
A Direct access play
Direct access allows you to start normal play from a specific
track to the last track on the CD.
1 Press [DISC].
2 (Within 10 seconds or so)
Press [1] ~ [5] to select the disc you want.
3 Press the numeric button(s) to select and play
your desired track number.
To select a two-digit track
Press [
h
10] and then the two numbers you want.
Note
You cannot use direct access play with 1-RANDOM or A-
RANDOM mode.
B Repeat play
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel repeat play
Press [REPEAT] once again. “REPEAT OFF” is displayed and
“ ” is cleared.
To repeat your favorite tracks
1.Program the tracks you want (perform steps 1 ~ 6 on page
15.)
2.Press [REPEAT] and make sure “REPEAT ON” and “ ” are
displayed.
3.Press [CD 3/8]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode, press [REPEAT] before or during
playback, and make sure “REPEAT ON” and “ ” are displayed.
C CD display
This function allows you to display the remaining play time of
the current track.
During play or pause mode
Press [DISPLAY] to display:
Remaining play timeElapsed play time
Note
When track number 25 or greater is playing, remaining play
time display shows “– –:– – ”.
3
2
1
1
DISC
2
123
45
ABC
DEF
GHI JKL
3
REPEAT
CD
6
12 3
45
6
78 9
0
10
SHIFT
DISPLAY
/REW
/FF
ALBUM CURSOR
ENTER
SEARCH
MARKER
INTRO
TITLE
DISPLAY
RQT7369-B_09-15_EN 15/1/04, 6:25 pm14
Listening operations
15
RQT7369
5
4
7
1
3
2
DEL
4/REW/4,
3/FF/¢
1
CD 6
➞
CLEAR
2
PROGRAM
3
DISC
4
123
45
ABC
DEF
GHI JKL
5
6 Repeat steps 3, 4, 5.
7
CD 6
CDs
Program play
This function allows you to program up to 24 tracks.
1 Press [CD 3/8] and then [7 CLEAR].
2 Press [PROGRAM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the
desired track.
6 Repeat steps 3 through 5 to program other tracks.
7 Press [CD 3/8] to start play.
When “CD FULL” appears
The number of programmed tracks is limited to 24 only.
You can do the following during program mode:
“PGM” appears on the display when play is stopped. Press [
44
44
4/
REW/4] or [
33
33
3/FF/¢] when “PGM” is displayed.
To check while programming, press [PROGRAM] twice after
“PGM” appears, then press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Add to the program.
Repeat steps 3 through 5 in the stop mode.
Memory retention
Your program is retained in memory for about 1 week while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1.Press [PROGRAM].
2.Press [CD 3/8].
Notes
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
• You can use repeat mode with program play.
• You cannot program CD-DA together with MP3 tracks.
To
cancel program
play mode
clear the last track
clear all
programmed tracks
select a two-digit
track
Action
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in
memory.
Press [DEL] in the stop mode.
Press [7 CLEAR]. Within 5 seconds,
press the button again to clear all
tracks. “CLEAR ALL” is displayed.
Press [
h
10] and then the two numbers
you want.
RQT7369-1B_09-15_EN 17/2/04, 4:54 pm15
16
RQT7369
Listening operations
ALBUM
( , )
ALBUM/
TRACK
4/REW/4,
3/FF/¢
CD 6
ALBUM/
TRACK
4
/REW
3
/FF
ALBUM/
TRACK
1
2
CD 6
7
CLEAR
1
ALBUM/
TRACK
2
Enjoying MP3
This unit allows you to play MP3 files and access up to 999
tracks (files), 255 albums (folders) and 20 sessions.
When making MP3 files to play on this unit
Disc format
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
File format
• MP3 files must have the extension “.MP3” or “.mp3”.
To play in a certain order
Prefix the folder and file names with 3-digits numbers in the
order you want to play them.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomsom multimedia.
Limitations on MP3 play
• This unit is not compatible with packet-write format.
• You cannot use 1-Disc Random play, All-Disc Random play
and search function.
• Some MP3 may not be played due to the condition of the
disc or recording.
• Recordings will not necessarily be played in the order you
recorded them.
Display when in the stop mode
“
MP3
” : Indicates the disc contains MP3 files
A Album skip play
During play or stop
Press [ALBUM (
or )] to select the desired album.
You can also press the center button of [ ALBUM/TRACK ],
followed by [4 or ¢] on the main unit to select an album.
When selecting in the stop mode:
Press [CD 3/8] to start play.
B Track skip play
During play or stop
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select a desired
track.
You can also press the center button of [ ALBUM/TRACK ],
followed by [4 or ¢] on the main unit to select a track.
When selecting in the stop mode:
Press [CD 3/8] to start play.
Note
During 1-ALBUM mode, track skipping can only be done within
the current album.
Preparation: Press [CD 3/8] and then [7 CLEAR].
1 Press [ALBUM ( or )] to select the album.
You can also press the center button of [ ALBUM/TRACK ],
followed by [4 or ¢] on the main unit to select
an album
.
2 Press the numeric buttons to select your desired
track in the current album.
For two digit numbers, press [
h
10] once then the two digits.
For three digit numbers, press [
h
10] twice then the three
digits.
C
Starting play from a desired track in a desired
album
or
or
or
RQT7369-B_16-20_EN 15/1/04, 6:26 pm16
17
RQT7369
Listening operations
1
2
7
CLEAR
1
2
CD 6
1
2
3
1
PLAY MODE
2
DISC
123
45
ABC
DEF
GHI JKL
3
Enjoying MP3
A INTRO function (Album scan)
Listen to the first track of all albums in the current disc for 10
seconds each to find your desired album.
Preparation: Press [CD 3/8] and then [7 CLEAR].
1 Press [INTRO] to start INTRO function.
(INTRO function is cancelled after playing the first track in
the last album on the current disc.)
2 While your desired album is playing, press
[CD 3/8].
Play starts from the first track of the album.
To stop during the process, press [INTRO] or [7 CLEAR].
B CD Play Mode function for MP3
1 Press [PLAY MODE] to select:
ALL-DISC
1-DISC
1-TRACK
1-ALBUM
2 Press [DISC] and (within 10 seconds) [1]–[5] to select
and start the disc.
3 • When you have selected 1-ALBUM in step 1.
Press [ALBUM ( or )] to select and start the
album.
• When you have selected 1-TRACK in step 1,
press the numeric buttons to select and play
will start.
For two digit numbers, press [
h
10] once then the two
digits.
For three digit numbers, press [
h
10] twice then the three
digits.
When playback ends
The current play mode will be retained.
When “NOT MP3/ERROR1” appears on the display
An unsupported MP3 format is being played. The unit will skip
that track and play the next one.
Final disc
For example, if play starts from disc 4, disc 3 will be the “final
disc”.
Order of progression:
Disc 4➞5➞1➞2➞3
Notes
• You can use repeat mode (\ page 14) with CD Play Mode
function.
• You cannot use program mode together with CD Play Mode
function.
or
Mode
1-DISC
ALL-DISC
1-TRACK
1-ALBUM
To
play one selected disc.
play all loaded discs in succession from the
selected disc to the final disc .
play one selected track on the selected disc.
play one selected album on the selected disc.
RQT7369-B_16-20_EN 15/1/04, 6:26 pm17
18
RQT7369
Listening operations
Enjoying MP3
A Program play for MP3
You can program up to 24 tracks.
Preparation:
1.Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2.Press [7 CLEAR].
1 Press [PROGRAM].
“PGM” appears.
2 Press [ALBUM ( or )] to select the album. To
select an album directly, press the numeric
buttons after pressing [ALBUM ( or )].
For two digit numbers, press [
h
10] once then the two digits.
For three digit numbers, press [
h
10] twice then the three digits.
3 Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to select the
track. To select a track directly, press the numeric
buttons after pressing [
44
44
4/REW/4] or [
33
33
3/FF/¢].
4 Press [ENTER].
Repeat steps 2 to 4 to program other tracks.
5 Press [CD 3/8] to start play.
Play will start according to programmed sequence until the end.
To exit program mode.
Press [PROGRAM] in the stop mode. (You can replay
your program by pressing [PROGRAM] then [CD 3/8].)
You can do the following while “PGM” is displayed.
Notes
• You can use repeat mode (\ page 14) with program play.
• You cannot program more than one CD for MP3.
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or
open the CD tray.
B Album/Track title search
Preparation: Press [CD 3/8] and then [7 CLEAR].
1 For album title search, press [TITLE SEARCH]
once.
For track title search, press [TITLE SEARCH]
twice.
2 Enter the album/track title keyword.
(\ page 19)
3 Press [ENTER].
Press [
33
33
3/FF/¢] to display the next title search result.
“NOT FOUND” is displayed when there is no match.
4 Press [CD 3/8] to start play from the album/track
found.
Title search mode is cancelled.
To cancel partway through
Press [7 CLEAR].
1
2
2 • 3
5
4
4/REW/4,
3/FF/¢
DEL
DISC
7 CLEAR
1
PROGRAM
2 • 3
4
5
CD
6
1
4
2
3
3/FF/¢
7 CLEAR
1
2
3
4
CD
6
To
check program
contents
add to the program
clear the last track
clear all
programmed tracks
Action
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] when
“PGM” is displayed.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press [
44
44
4/REW/4] or [
33
33
3/FF/¢].
Repeat steps 2~4.
Press [DEL] in the stop mode.
Press [7 CLEAR]. Within 5 seconds, press
the button again to clear all tracks.
“CLEAR ALL” is displayed.
4
/REW
3
/FF
RQT7369-1B_16-20_EN 26/2/04, 10:28 am18
19
RQT7369
Listening operations
Enjoying MP3
A Entering characters
You can enter up to 9 characters for album/track title search.
Press the numeric buttons to select the required character.
Press [3/FF/¢] to enter character.
Editing keywords
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] to revise any characters.
To delete, move the cursor over the character and press [DEL].
B Marking a track
You can mark one track each on the discs loaded so that you
can start play from them later.
To mark a track number
1 During play or stop
For MP3, refer to “Track skip play” on page 16.
For CD-DA, press the numbered buttons.
Select your desired track with the numeric buttons.
For two digit numbers, press [
h
10] once then the two digits.
For three digit numbers, press [
h
10] twice then the three
digits.
2 Hold down [MARKER] until “STORING” blinks on
the display.
If you store a new track, the old track will be cleared.
To recall a marked track number in the current disc
During play or stop
Press [MARKER] to recall a marker and start play.
Notes
•“NO MARKER” indicates that the marker in the current disc
is empty.
• The marker memory will be cleared when you open the CD
tray.
• For CD-DA, you cannot use this function during 1-Disc
Random play and All-Disc Random play.
• You cannot use this function during program mode.
C Display for MP3
During play or pause
Press [DISPLAY] to select your desired CD display.
abc d e f g
Notes
• When a title is longer than 9 characters, it will scroll across
the display.
•“NO ID3” is displayed if titles with ID3 tags haven’t been
entered.
• Maximum number of displayable characters:
Album/track title: 31
ID3 album/title/artist name: 30
(ID3 is a tag embedded in MP3 track to provide information
about the track.)
• This unit can display album and track titles with ID3 tags
(version 1.0 and 1.1). Titles containing text data that the unit
doesn’t support cannot be displayed.
4/REW/4,
3/FF/¢
Numeric
buttons
DEL
2
1
1
2
DISPLAY
a
g
f
b
c
d
e
Numbered Characters
buttons
11
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
h
10
space
!”#$ %&’()∗ +,– ./:;=?_
8
Numbered Characters
buttons
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
00
RQT7369-B_16-20_EN 15/1/04, 6:26 pm19
20
RQT7369
Listening operations
Cassette tapes
1 Press [OPEN 0] to insert a cassette.
Close the lid by hand.
2 Press [TAPE 3] to start playback.
Repeat step 1 and 2 to play the other side of the tape.
3 Adjust the volume.
Cassette tape selection and care
Types of cassettes which can be played correctly
Use normal position tapes.
High position and metal position tapes can be played, but the
unit will not be able to do full justice to the characteristics of
these cassettes.
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should
be wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts
if used incorrectly.
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there.
Each press increases the number of tracks skipped, up to a
maximum of 9.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] during play.
Note
The TPS function searches for silent parts of about 4 seconds
in length which are normally found between tunes. As a result,
it may not function properly in the following cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
OPEN
3
2
1
Top of the unit
4
/REW/4,
3/FF/¢
STOP7,
–DEMO
1
OPEN 0
B
Insert inside the
guides
Forward side
B
2
TAPE
3
3
DOWN
VOLUME
UP
To
stop tape playback
start one touch play
fast-forward and
rewind
Action
Press [STOP 7, – DEMO].
Press [TAPE 3] when the system is
OFF with the cassette loaded.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] in
the stop mode.
RQT7369-B_16-20_EN 15/1/04, 6:26 pm20
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Panasonic SCPM19 Manuale utente
- Categoria
- Set audio per la casa
- Tipo
- Manuale utente
in altre lingue
- English: Panasonic SCPM19 User manual
Documenti correlati
-
Panasonic SLSX430 Manuale del proprietario
-
Panasonic RXDT07 Istruzioni per l'uso
-
-
-
-
-
-
-
Panasonic SCPM71SD Manuale del proprietario
-
