PURE Evoke H6 Prestige Manuale del proprietario

Categoria
Radio
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

Evoke H6
1
Evoke H6
Thank you for choosing the Evoke H6. This user manual explains how
to use the various features of your Evoke H6. If you need more help,
you can view our help topics at support.pure.com.
Source
123456+
Menu
Volume Select
FR
ES
IT
NO
DA
EN
DE
NL
2
3
Contents
Evoke H6 1
Safety 4
Getting started 5
Your Evoke 5
Setting up your Evoke H6
6
Switching your Evoke H6 on and off 7
Changing the volume
7
Digital radio 8
Listening to digital radio 8
Changing the digital radio station 8
Automatically tuning to digital radio
stations
8
FM radio 9
Listening to FM radio 9
Changing the FM radio station 9
Changing the scan settings for FM
radio
9
Choosing stereo or mono reception
for FM radio
9
Radio station presets 10
About presets 10
Storing a radio station as a preset 10
Listening to a preset
10
Bluetooth and auxiliary
devices 11
Connecting a Bluetooth device 11
Connecting a device with an
auxiliary cable
11
Alarms 12
Setting an alarm 12
Cancelling an existing alarm
12
Snoozing or silencing an alarm 12
Timers 13
Setting the kitchen timer 13
Silencing the kitchen timer
13
Setting the sleep timer
13
Settings 14
Personalising the sound on your
Evoke H6
14
Display settings
14
Clock settings
15
Changing the language
16
Resetting to factory settings 16
Updating the software
16
Using a ChargePAK 17
About ChargePAKs 17
Inserting a ChargePAK
17
Troubleshooting 18
Specifications 19
EN
4
Safety
1. Read, heed and retain these instructions – All the safety and operating instructions should be read before this product is
used and retained for future reference. All warnings on the appliance and in the operating instructions should be followed
2. Failure to install or use the product in accordance with these instructions may impair the safety of the product and
invalidate the warranty.
3. Use only power supply listed in these user manual/user instructions (supplied by Pure with model number SW1202400-IM)
to power the equipment and do not use the power supply for any other purpose.
4. The direct plug-in adapter is used as a disconnect device, the disconnect device shall remain readily operable and
accessible.
5. Do not immerse in water or use in a wet / moist environment, such as in the shower or bathroom if plugged into the mains
supply. The power supply shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
placed above it.
6. Do not remove screws from or open the product casing.
7. Keep the product away direct sunlight and from heat sources such as radiators, heaters or other appliances that produce
heat.
8. Danger of explosion if the battery is incorrectly replaced (ensure correct polarity). Replace only with the same type. The
battery shall not be exposed to excessive heat such as sunshine, fire or similar. Attention is drawn to the environmental
aspects of battery disposal. See Section - “Using a ChargePAK”
9. Do not expose the product to naked flame sources, such lighted candles which should not be placed on or near the
product.
10. Ventilation should not be impaired by covering the product or power supply.
11. Clean only with a dry cloth.
12. This product is intended for use in moderate climates.
13. If the product is used in a manner not specified by the instructions, the product’s protection could be impaired.
14. Do not use the product if any damage is noticed.
15. Product repairs are only allowed to be carried out by competent and authorised personnel.
Safety instructions and cautions
Symbol Description
This symbol is used on the product to indicate a caution and that instructions should be read before use.
This symbol indicates DC voltage.
This symbol indicates where the product is switched on or put into standby.
Symbols used on this product
1. Read the instructions for ChargePAK use in this document.
2. Only use your ChargePAK with original Pure products. Use only the original Pure ChargePAK F1. Caution: Danger of
explosion if battery is incorrectly replaced or another type used.
3. Store ChargePAK in a cool, dry place at normal room temperature. Remove from devices that will be stored unused for
extended periods.
4. Do not puncture, modify, drop, throw, or cause other unnecessary shocks to your ChargePAK. May present a risk of fire,
explosion, or chemical burn if mistreated.
5. Do not dispose of ChargePAK in a fire or incinerator, or leave in hot places such as a motor car under direct sunlight. Do not
store near oven, stove, or other heat source.
6. Do not connect ChargePAK directly to an electrical source, such as a building outlet or automobile power-point. Do not
place into a microwave oven, or any other high-pressure container.
7. Do not immerse ChargePAK in water or otherwise expose it to liquids.
8. Do not short circuit ChargePAK.
9. Do not use or charge a ChargePAK that appears to be leaking, discoloured, rusty, deformed; emitting an odour; or is
otherwise abnormal.
10. Do not touch a leaking ChargePAK directly; wear protective material to remove and dispose of it properly immediately.
11. Do not store where children may have access.
12. Dispose of ChargePAK as per normal rechargeable batteries according to the local laws and regulations of your region.
ChargePAK F1 safety instructions
5
Getting started
Your Evoke
Front controls
Source
123456+
Menu
Volume Select
1
2
3
4
5
6
7
8
9
10
1 Snoozehandle Tap to snooze an alarm or brighten the screen when dimmed
2 Standby Switch your Evoke H6 on and off, or put it in standby
3 Volume Turn to change the volume, press to mute the volume
4 Timer Press to set a sleep timer
5 Alarm Press to set an alarm or a kitchen timer
6 Source Press to change between digital radio, FM radio, Bluetooth, and
auxiliary input
7 Back Press when in the menu to go back to the previous screen
8 Menu Press to change settings and options
9 Presets Press to store and access your favourite radio stations
10 Select Turn and press to browse radio stations, or select settings and options
EN
6
Rear connections
12V DC 2.4
A
x inAu
Input for supplied
mains adapter only
3.5mm output for
stereo headphones
Analogue stereo
input for auxiliary
cables
Micro USB
connector for
software updates
Setting up your Evoke H6
To set up your Evoke H6:
1. Unclip the aerial and fully extend it.
2. Connect the supplied mains adapter to the input on the back of your Evoke H6.
3. Plug the mains adapter into the mains supply.
>
+
12V DC Aux in
+
12V DC Aux in
+
12V DC Aux in
7
Switching your Evoke H6 on and off
If you have a ChargePAK rechargeable battery, insert it before you switch your Evoke H6 on. Read more
about using a ChargePAK on page 17.
To switch your Evoke H6 on:
• Press
.
Note: When you switch your Evoke H6 on for the first time, it starts tuning to digital radio stations.
After the autotune is complete, you can start listening to digital radio.
To switch your Evoke H6 off or put it in standby:
Press
.
If your Evoke H6 is being powered by a ChargePAK, your Evoke H6 switches off. If your Evoke
H6 is connected to a power socket, your Evoke H6 enters standby. In standby, your Evoke H6 uses a
low amount of power and displays the time and date on the screen.
Changing the volume
To change the volume:
To increase the volume, turn the Volume dial clockwise.
To decrease the volume, turn the Volume dial anticlockwise.
To mute the volume:
Press the Volume dial.
Volume
Volume
EN
8
Digital radio
Listening to digital radio
To listen to digital radio:
Press
Source
until ‘Digital Radio’ is displayed.
Tip: Some digital radio stations also broadcast information and graphics, such as music album
artwork or weather updates. Press the Select dial to change between slideshow, large slideshow
and display modes.
Changing the digital radio station
To change the digital radio station:
1. Turn the Select dial left or right to browse through the available radio stations.
2. Press the Select dial to change radio station.
> >
Tip: A ‘>>’ next to a radio station name means the station has a secondary service, which provides more
content. The secondary service is listed below the radio station with a ‘<<’ next to the service name.
Secondary services may only be available at certain times.
A ‘?’ next to a radio station name means the station is inactive or unavailable.
Automatically tuning to digital radio stations
When you switch your Evoke H6 on for the first time, it automatically scans for digital radio stations. If you
move your Evoke H6 to a new location, perform an autotune to update the list of radio stations.
To automatically tune to digital radio stations:
1. Press
.
2. Turn and press the Select dial to choose ‘Autotune’.
Your Evoke H6 starts scanning for digital radio stations.
Station List
BBC Radio 1
BBC Radio 1Xtra
BBC Radio 2
BBC Radio 3
BBC Radio 4
BBC Radio 4Extra
BBC Radio 5 Live
Select
Select
9
FM radio
Listening to FM radio
To listen to FM radio:
• Press
Source
until ‘FM’ is displayed.
Changing the FM radio station
To change the FM radio station:
To scan to the previous or next radio station, turn the Select dial left or right and then press the
Select dial.
>
To manually tune to a radio station, turn the Select dial left or right.
The frequency steps up or down by 0.05 MHz.
Changing the scan settings for FM radio
When you scan for FM radio stations, you can include all radio stations or only those with a strong signal.
To change scan settings for FM radio:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Scan Setting’.
3. Turn and press the Select dial to choose ‘Strong Stations Only’ or ‘All Stations’.
Choosing stereo or mono reception for FM radio
By default, your Evoke H6 uses stereo reception for FM radio. If your FM radio stations have a weak signal,
try using mono reception to improve the signal strength.
To choose stereo or mono reception:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Stereo’.
3. Turn and press the Select dial to choose ‘FM Stereo’ or ‘Forced Mono’.
Select
Select
Select
EN
10
Radio station presets
About presets
You can store your favourite radio stations as presets. You can use presets to quickly tune to your stored
radio stations whenever you want.
On the front of your Evoke H6, there are six preset buttons. Use
1
to
5
for quick access to your
favourite radio stations. Use
6+
to open a list of all your presets.
You can store up to 20 digital radio stations and up to 20 FM radio stations as presets.
Storing a radio station as a preset
To store a radio station to a preset from 1 to 5:
1. Tune to the radio station you want to store.
2. Choose a preset button from
1
to
5
then press and hold it until a is displayed.
Tip: If there is already a radio station stored to the preset you’ve selected, the new station replaces it.
To store a radio station to the preset list:
1. Tune to the radio station you want to store.
2. Press and hold
6+
until the preset list is displayed.
3. Turn and press the Select dial to choose a preset number. A
is displayed.
Tip: If there is already a radio station stored to the preset you’ve selected, the new station replaces it.
>
Listening to a preset
To listen to a preset from 1 to 5:
Press a preset button from
1
to
5
. For example, to listen to the radio station stored as preset
2, press
2
.
To listen to any preset:
1. Press
6+
to open the preset list.
2. Turn and press the Select dial to choose a preset.
Save to Preset
1: BBC Radio 1
2: (Empty)
3: (Empty)
4: (Empty)
5: (Empty)
6: (Empty)
7: (Empty)
6+
11
Bluetooth and auxiliary devices
Connecting a Bluetooth device
You can use Bluetooth to wirelessly connect to a device, such as a mobile phone or tablet. You can then
stream music from your mobile phone or tablet through your Evoke H6.
The first time you connect a Bluetooth device to your Evoke H6, you need to pair them. After you’ve paired
a device with your Evoke H6, your Evoke H6 remembers it for the next time.
To connect a Bluetooth device:
1. Press
Source
until ‘Bluetooth’ is displayed.
2. On your Bluetooth device, switch Bluetooth on and connect to your Evoke H6.
Note: For more information, see your Bluetooth device’s user manual. If you are asked to enter a
passcode, enter 0000.
When ‘Connected’ is displayed on your Evoke H6 screen, your Evoke H6 is ready to stream music.
Tip: If you want to connect a different Bluetooth device to your Evoke H6, switch off Bluetooth on the
connected device first.
Connecting a device with an auxiliary cable
You can use an auxiliary cable to connect a device, such as an MP3 player, to your Evoke H6. You can
then enjoy music saved on the device through your Evoke H6.
To connect a device with an auxiliary cable:
1. Press
Source
until ‘Auxiliary Input’ is displayed.
2. Insert an auxiliary cable into the Aux in socket on the back of your Evoke H6.
3. Insert the other end of the auxiliary cable into the device you want to connect.
Your Evoke H6 is now ready to play music from the connected device.
Bluetooth
14-7-2016
Thursday
Connected
EN
12
Alarms
To wake up to your favourite radio station, you can set up to two alarms on your Evoke H6.
Note: Alarms will not work when your Evoke H6 is being powered by a ChargePAK and off.
Setting an alarm
To set an alarm:
1. Press .
2. Turn and press the Select dial to choose ‘Alarm 1’ or ‘Alarm 2’.
3. Turn and press the Select dial to change settings for the alarm.
‘Alarm Turn the alarm on or off
‘Frequency’ Choose how often you want the alarm to sound
‘Wake Up time’ Choose the time for the alarm
‘Source Choose to wake up to an FM or digital radio station, or a buzzer
Tip: To choose FM or digital radio, you need to have stored a
radio station as a preset.
‘Preset’ Choose a radio station to wake up to
‘Duration’ Choose how many minutes the alarm sounds for
‘Volume’ Choose the volume for the alarm
4. When you have made all of your changes, press
Menu
to exit the menu.
The
1
or
2
symbol is displayed at the bottom of the screen when an alarm is set.
> >
Cancelling an existing alarm
To cancel an existing alarm:
1. Press .
2. Turn and press the Select dial to choose ‘Alarm 1’ or ‘Alarm 2’.
3. Turn and press the Select dial to change the ‘Alarm’ setting to ‘Off.
Snoozing or silencing an alarm
To snooze an alarm:
Touch the SnoozeHandle.
The alarm snoozes for 5 minutes.
To silence an alarm:
Press
.
Alarm 1 Info.
Alarm
Frequency
Wake Up time
Source
Preset
Duration
Volume
On
Daily
9:00 AM
FM
Last Listened
60
5
Alarm
Alarm 1
Alarm 2
Timer
13
Timers
Setting the kitchen timer
The kitchen timer counts down and then ends with an alarm tone.
To set the kitchen timer:
1. Press
.
2. Turn and press the Select dial to choose ‘Timer’.
3. Turn the Select dial to choose the duration of the timer.
4. Press the Select dial to start the timer.
The
symbol is displayed at the bottom of the screen when the timer is set.
> >
Silencing the kitchen timer
To silence the kitchen timer:
Press .
Setting the sleep timer
The sleep timer puts your Evoke H6 in standby after a set amount of time.
To set the sleep timer:
1. Press
.
2. Turn the Select dial to choose the duration of the timer.
Tip: You can choose between 15 and 90 minutes.
3. Press the Select dial to start the timer.
The
symbol and remaining time is displayed at the bottom of the screen when the timer is set.
>
Kitchen timer
00:00
Set Sleep Timer
15 minutes
Alarm
Alarm 1
Alarm 2
Timer
EN
14
Settings
Personalising the sound on your Evoke H6
Use the equaliser and boost setting to get the most out of your music. There are several equaliser settings
set up already. For example, to hear classical music at its best, change the equaliser setting to ‘Classic’.
You can also customise the equaliser to change the treble, bass and loudness.
To use the equaliser:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Audio.
3. Turn and press the Select dial to choose ‘Equaliser’.
4. Choose an equaliser setting:
To choose an equaliser setting, turn and press the Select dial.
To use custom settings, turn and press the Select dial to choose ‘Custom’. Then turn and
press the Select dial to change the treble, bass and loudness.
Display settings
Changing the information displayed on the screen
You can change the information that is displayed on the screen when you are listening to the radio. For
example, you can display scrolling information about the current radio station.
To change the information displayed on the screen:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Display’.
3. Turn and press the Select dial to choose ‘Info’.
4. Turn and press the Select dial to choose the information to display.
Changing the screen brightness
Your Evoke H6 has a light sensor, which adjusts the screen brightness based on your surroundings. You
can also manually change the screen brightness.
To help save energy, you can dim the screen after 10 seconds of inactivity.
To change the brightness of the screen when switched on:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Display’.
3. Turn and press the Select dial to choose ‘On Level’.
4. Turn and press the Select dial to choose a brightness level. To make your screen brighter, choose a
higher number. To automatically set the screen brightness, choose ‘Auto.
15
To dim the screen after 10 seconds of inactivity:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Display’.
3. Turn and press the Select dial to choose ‘Duration’.
4. Turn and press the Select dial to choose ‘Timed’.
To change the brightness of the screen when dimmed:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Display’.
3. Turn and press the Select dial to choose ‘Dim Level’.
4. Turn and press the Select dial to choose a brightness level. To make your screen brighter, choose a
higher number.
Clock settings
Setting the time and date
Your Evoke H6 can use FM and digital radio signals to set the time and date automatically. If the time and
date do not update automatically, you can set them manually.
To set the time and date automatically:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Clock’.
3. Turn and press the Select dial to choose ‘Auto Update’.
4. Turn and press the Select dial to choose how to set the time and date.
To set the time and date manually:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Clock’.
3. Turn and press the Select dial to choose ‘Set Time/Date.
4. Turn and press the Select dial to set the date.
5. Turn and press the Select dial to set the time.
Changing the time format
To change the time format:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Clock’.
3. Turn and press the Select dial to choose ‘Set 12/24 Hour’.
4. Turn and press the Select dial to choose the time format.
EN
16
Changing the date format
To change the date format:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Clock’.
3. Turn and press the Select dial to choose ‘Set Date Format’.
4. Turn and press the Select dial to choose the date format.
Changing the language
You can change the language of menus and settings.
To change the language:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘Language’.
4. Turn and press the Select dial to choose a language.
Resetting to factory settings
A factory reset removes all stored presets, alarms, timers and settings on your Evoke H6.
Note: You cannot undo a factory reset.
To reset to factory settings:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘Factory Reset’.
4. Turn and press the Select dial to choose ‘Yes’.
Your Evoke H6 resets to factory settings and then restarts.
Updating the software
Pure may provide software updates to your Evoke H6. To check for available software updates, visit
support.pure.com.
Tip: To be contacted when software updates are available, you can register your product at pure.com/
register.
To check the current software version:
1. Press
Menu
.
2. Turn and press the Select dial to choose ‘Settings’.
3. Turn and press the Select dial to choose ‘Software Version’.
To update the software:
1. Use a Micro USB cable to connect your Evoke H6 to your computer.
2. Follow the instructions provided with the software update file.
17
Using a ChargePAK
About ChargePAKs
A ChargePAK is a rechargeable battery pack that allows you to listen to your music anywhere. When
your Evoke H6 is connected to a power outlet, it charges the ChargePAK. You can then disconnect your
Evoke H6 from the power and take your music with you.
Inserting a ChargePAK
Note: Your Evoke H6 is only compatible with a Pure ChargePAK F1. Do not use any other batteries
or ChargePAK models with your Evoke H6.
To insert a ChargePAK:
1. Switch your Evoke H6 off and disconnect it from the power supply.
2. At the back of your Evoke H6, press the two clips on the battery cover to remove it.
3. Insert the ChargePAK into the battery compartment, with the electrical contacts on the ChargePAK
facing down and the Pure label facing you.
4. Replace the battery cover.
5. Connect your Evoke H6 to the power supply.
The ChargePAK starts charging. If the ChargePAK is new or has not been used for a long time, we
recommend you charge it for at least 24 hours.
Note: When the ChargePAK is charging, it is normal for it to get warm. The efficiency of the
ChargePAK may decrease over time.
>
EN
18
Troubleshooting
Problem Solution
I can’t hear any sound Use the Volume dial to turn the volume up.
For digital radio, perform an autotune. Read more on page 8.
For Bluetooth or auxiliary devices, check a device is connected. Turn
the volume up on the connected device.
The screen is very dark Remove any obstructions from in front of the speaker. There is a light
sensor behind the speaker grill.
Turn up the screen brightness. Read more on page 14.
I can’t find an FM or
digital radio station
Adjust your aerial and check it is fully extended.
Move your radio to another location.
For digital radio, perform an autotune. Read more on page 8.
For FM radio, try using mono reception to improve the signal strength.
Read more on page 9.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124

PURE Evoke H6 Prestige Manuale del proprietario

Categoria
Radio
Tipo
Manuale del proprietario
Questo manuale è adatto anche per