dBTechnologies IS5T Manuale del proprietario

Marca: dBTechnologies

Modello: IS5T

Categoria: Altoparlanti

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

IS4T

MANUALE D’USO – Sezione 1.

Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO - Sezione2”.

USER MANUAL - Section 1.

The warnings in this manual must be observed in conjunction with the “USER MANUAL - Section 2”.

BEDIENUNGSANLEITUNG – Abschnitt 1.

Die Hinweise in der vorliegenden Bedienungsanleitung sind ebenso zu befolgen wie die in der „BEDIENUNGSANLEITUNG – Abschnitt 2“.

MANUEL D’UTILISATION – Section 1

Respecter à la fois les avertissements donnés dans ce document et dans le MANUEL D’UTILISATION - Section 2.

MANUAL DE USO – Sección 1

Respete las advertencias de este manual y los contenidos del “MANUAL DE USO - Sección 2”.

Professional passive speakers

$$%%&&%%

))

((

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

WARNING

Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to

persons or properties. For safety reasons do not place one loudspeaker on top of another without proper

fastening systems. Before hanging the loudspeaker check all the components for damages, deformations, missing

or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid

spots exposed to bad weather conditions.

The external wiring connected to speaker output terminals requires installation by qualied personnel only. Once

the equipment is installed, prevent access to the connectors to unqualied personnel. Only use the accessories

and congurations described in this manual, and proceed in accordance with the instructions given in

the manuals for the accessories. dBTechnologies will not accept any responsibility for damages caused by

inappropriate accessories or additional devices.

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

ITALIANO

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

INDICE

1. INFORMAZIONI GENERALI .......................................................................................................... 5

BENVENUTI! ..................................................................................................................................5

PANORAMICA INTRODUTTIVA .....................................................................................................5

RIFERIMENTI PER L’UTENTE .......................................................................................................... 5

CONTENUTO DELLA CONFEZIONE ...............................................................................................6

CARATTERISTICHE MECCANICHE ED ACUSTICHE ........................................................................6

DIMENSIONI E PESO ............................................................................................................................................ 6

MECCANICA ......................................................................................................................................................... 7

PROTEZIONE CONTRO I CORPI SOLIDI E LIQUIDI (GRADO IP) .......................................................................... 7

COPERTURA ACUSTICA ....................................................................................................................................... 7

2. COLLEGAMENTI ............................................................................................................................8

COLLEGAMENTO E RILANCIO DEL SEGNALE AUDIO ................................................................... 8

3. INSTALLAZIONE ............................................................................................................................9

INSTALLAZIONE A MURO ..............................................................................................................9

4. PRIMA RISOLUZIONE DEI PROBLEMI ....................................................................................... 10

5. SPECIFICHE TECNICHE ................................................................................................................10

GENERALE .......................................................................................................................................................... 10

DATI ACUSTICI .................................................................................................................................................... 10

DATI ELETTRICI ................................................................................................................................................... 10

CONNESSIONI .................................................................................................................................................... 10

DIMENSIONI ....................................................................................................................................................... 11

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

1. INFORMAZIONI GENERALI

BENVENUTI!

Grazie per aver acquistato un prodotto progettato e sviluppato in Italia da dBTechnologies! Questa serie di

diffusori da installazione racchiude in sé anni di esperienza ed innovazione nel campo della diffusione sonora, con

l’impiego di soluzioni d’avanguardia in campo acustico, elettronico e di ricerca sui materiali.

PANORAMICA INTRODUTTIVA

IS4T, IS5T, IS6T sono diffusori passivi di forma cubica dedicati all’installazione, progettati pensando alle speciche

esigenze degli installatori. In particolare sono destinati alla riproduzione di musica di sottofondo di alta qualità

in installazioni sse, indoor e outdoor; le varianti di colore nero o bianco danno ai diffusori un look elegante e

discreto, rendendoli adatti a qualsiasi contesto commerciale e istituzionale. Assicurano un collegamento facile e

veloce grazie ai connettori Euroblock (Phoenix). Le caratteristiche principali sono:

• design ergonomico, molto compatto e versatile

• facilità e rapidità di installazione a muro con la staffa inclusa

• invisibili punti di montaggio per la massima discrezione

• ampia copertura acustica

• inclinazione variabile

IS4T

IS4T è equipaggiato con un woofer full range 4” (VC 1”).

IS5T

IS5T è equipaggiato con un woofer full range 5” (VC 1”).

IS6T

IS6T è equipaggiato con un woofer 6,5” (VC 1.5”) e un compression driver da 0,75” (VC 1”) in congurazione

coassiale.

RIFERIMENTI PER L’UTENTE

Per utilizzare al meglio il vostro diffusore IS consigliamo di:

• leggere il manuale d’uso Quick start presente nella confezione e questo manuale d’uso

completo in ogni sua parte e conservarlo per tutta la durata di vita del prodotto.

• registrare il prodotto sul sito http://www.dbtechnologies.com nella sezione “SUPPORTO”.

• conservare prova d’acquisto e GARANZIA (Manuale d’uso “sezione 2”).

CONTENUTO DELLA CONFEZIONE

Verificare che il contenuto dell’imballo dei diffusori IS4T, IS5T, IS6T sia completo. L’imballo contiene:

• diffusore IS4T, IS5T, o IS6T

• quick start e documentazione relativa alla garanzia

• staffa per installazione

• viti e rondelle per il fissaggio del box alla staffa

• n.2 connettori volanti Euroblock (Phoenix) femmina passo 5.08mm 2 poli

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

CARATTERISTICHE MECCANICHE ED ACUSTICHE

DIMENSIONI E PESO

La serie IS è stata progettata con particolare attenzione all’ottimizzazione dell’ingombro. Il peso è di appena 2 kg

per il modello IS4T, 2.8 kg per IS5T e di 4 kg per IS6T.

Le misure principali sono:

130 x 130 x 150mm (LxAxP) - modello IS4T

160 x 160 x 180mm (LxAxP) - modello IS5T

195 x 195 x 210mm (LxAxP) - modello IS6T

195

201

120

195

245

210

L A P Ls As Ps

IS4T 130 mm 130 mm 150 mm 136 mm 170 mm 100 mm

IS5T 160 mm 160 mm 180 mm 166 mm 205 mm 110 mm

IS6T 195 mm 195 mm 210 mm 201 mm 245 mm 120 mm

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

MECCANICA

Gli inserti filettati posti sui due lati consentono di fissare i diffusori alla staffa fornita in dotazione tramite le due

viti e le relative rondelle in gomma incluse.

Per il modello IS4T la staffa offre due posizioni di fissaggio; nel caso di IS5T e IS6T le posizioni possibili sono tre.

Per maggiori dettagli consultare la sezione INSTALLAZIONE A MURO di questo manuale.

PROTEZIONE CONTRO I CORPI SOLIDI E LIQUIDI (GRADO IP)

I presenti diffusori sono protetti contro l’ingresso di corpi solidi e liquidi esterni con grado di protezione IP32

secondo la EN 60529.

Per garantire questa specica, i medesimi deve essere installati con angolo non inferiore ai 15° rispetto alla

verticale, puntati verso il basso.

I cavi di connessione dei diffusori all’amplicatore devono avere un diametro di 8 mm (0.31 inch.).

Il non rispetto delle presenti prescrizioni di installazione, potrebbe non garantire le prestazioni

di protezione dichiarate.

COPERTURA ACUSTICA

La copertura è di 110°x110° per IS4T e IS5T, mentre il modello IS6T ha una copertura di 100°x100°.

H V

IS4T 110° 110°

IS5T 110° 110°

IS6T 100° 100°

IMG_DISPERSIONE

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

2. COLLEGAMENTI

COLLEGAMENTO E RILANCIO DEL SEGNALE AUDIO

L’ingresso audio e il rilancio a un altro diffusore avviene tramite connessione Euroblock (Phoenix); i connettori

sono protetti da un pannello metallico facilmente removibile svitando le quattro viti che lo ssano al box.

Collegare la sorgente audio (proveniente ad es. da un amplicatore o un altro diffusore) al morsetto INPUT

tramite il connettore femmina incluso, rispettando la polarità indicata vicino ai connettori (positivo con positivo,

negativo con negativo). Il rilancio a un altro diffusore avviene in maniera analoga: collegare l’uscita LINK del

diffusore all’ingresso INPUT di quello successivo rispettando la polarità (positivo con positivo, negativo con

negativo).

INPUT LINK

+-+-

SORGENTE

AUDIO

SPEAKER

PARALLELO

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

3. INSTALLAZIONE

INSTALLAZIONE A MURO

Gli speaker IS4T, IS5T, IS6T sono progettati per l’installazione a muro tramite le staffe incluse. Seguire il seguente

procedimento:

• appoggiare la staffa alla parete ed effettuare quattro fori

(materiale non incluso) prendendo come riferimento i

quattro fori praticati sulla supercie di appoggio della

staffa

• fissare la staffa al muro con viti e bulloni (non forniti)

• allineare le rondelle in gomma in dotazione

con i due fori lettati sulle superci laterale del

diffusore

• assicurare il diffusore alla staffa con le due viti in dotazione nella posizione corrispondente

all’inclinazione voluta

ATTENZIONE!

• Non sono ammessi tipi di installazione diversi da quelli qui illustrati.

• L’installazione deve essere effettuata da parte di personale esperto.

• I mezzi di fissaggio, a cura dell’installatore devono essere adeguati alla parete, per

garantire stabilità e sicurezza.

• Verificare sempre che il posizionamento sia stabile, e che l’installazione non costituisca

fonte di pericolo per persone, animali o cose.

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

4. PRIMA RISOLUZIONE DEI PROBLEMI

Il diffusore non emette nessun suono

1. Verificare che il collegamento in ingresso del segnale audio sia correttamente effettuato

2. Verificare che i cavi utilizzati non siano danneggiati

3. Verificare che la sorgente audio a monte sia accesa e mostri la presenza di segnale in uscita

5. SPECIFICHE TECNICHE

GENERALE

IS4T IS5T IS6T

Tipologia: Diffusore passivo fullrange Diffusore passivo fullrange Diffusore passivo 2 vie

coassiale

Protezione contro corpi

solidi e liquidi: IP32 (angolo minimo 15°) IP32 (angolo minimo 15°) IP32 (angolo minimo 15°)

DATI ACUSTICI

Risposta in frequenza

[-6 dB]: 110 – 20000 Hz 95 - 18000 Hz 85 - 20000 Hz

Sensibilità: 89 dB 92 dB 93 dB

Max SPL (@ 1m): 111 dB 116 dB 119 dB

LF: 4” 5” 6.5”

LF Voice Coil: 1” 1” 1.5”

HF: - - 0.75”

HF Voice Coil: - - 1”

Frequenza di crossover: - - 2.1 kHz

Direttività: 110°x110° 110°x110° 100°x100°

DATI ELETTRICI

Impedenza nominale: 8 Ω 8 Ω 8 Ω

Potenza RMS: 40 W 60 W 100 W

Potenza di picco: 160 W 240 W 400 W

CONNESSIONI

Ingresso: Euroblock (Phoenix) 2 poli

Link: Euroblock (Phoenix) 2 poli

Italiano

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

DIMENSIONI

Materiale: Cabinet in legno, verniciatura nera/bianca

Griglia: Interamente in metallo - lavorazione CNC

Montaggio: A muro con staffa

Predispozioni anteriori di

montaggio: Punti integrati laterali nel cabinet

Larghezza: 130 mm (5.1 inch.) 160 mm (6.3 inch.) 195 mm (7.7 inch.)

Altezza: 130 mm (5.1 inch.) 160 mm (6.3 inch.) 195 mm (7.7 inch.)

Profondità: 150 mm (5.9 inch.) 180 mm (7 inch.) 210 mm (8.3 inch.)

Peso: 2 kg (4.4 lbs.) 2.8 kg (6.17 lbs.) 4.8 kg (10.6 lbs.)

Caratteristiche, speciche e aspetto dei prodotti sono soggetti a possibili cambiamenti senza previa

comunicazione. dBTechnologies si riserva il diritto di apportare cambiamenti o miglioramenti nel design o nelle

lavorazioni senza assumersi l’obbligo di cambiare o migliorare anche i prodotti precedentemente realizzati.

A.E.B. Industriale Srl

Via Brodolini, 8

Località Crespellano

40053 VALSAMOGGIA

BOLOGNA (ITALIA)

Tel +39 051 969870

Fax +39 051 969725

www.dbtechnologies.com

[email protected]

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

CONTENTS

1. GENERAL INFORMATION ..........................................................................................................13

WELCOME! ..................................................................................................................................13

INTRODUCTORY OVERVIEW ......................................................................................................13

USER INFORMATION ..................................................................................................................13

PACKAGE CONTENTS ...................................................................................................................14

MECHANICAL AND ACOUSTIC FEATURES ..................................................................................14

DIMENSIONS AND WEIGHT .............................................................................................................................. 14

MECHANICAL FEATURES ................................................................................................................................... 15

PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING) ................................................................ 15

ACOUSTIC COVERAGE ....................................................................................................................................... 15

2. CONNECTIONS ............................................................................................................................16

CONNECTING AND LINKING THE AUDIO SIGNAL .....................................................................16

3. INSTALLATION ............................................................................................................................17

WALL MOUNTING ........................................................................................................................17

4. TROUBLESHOOTING ..................................................................................................................18

5. TECHNICAL SPECIFICATIONS .....................................................................................................18

GENERAL ............................................................................................................................................................ 18

ACOUSTIC DATA ................................................................................................................................................. 18

ELECTRICAL DATA .............................................................................................................................................. 18

CONNECTIONS ................................................................................................................................................... 18

DIMENSIONS ...................................................................................................................................................... 19

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

1. GENERAL INFORMATION

WELCOME!

Thanks for purchasing a product that was designed and developed in Italy by dBTechnologies! This series of

installation speakers embodies years of experience and innovation in the eld of sound reproduction, with the

use of cutting edge solutions in the elds of acoustics, electronics and materials research.

INTRODUCTORY OVERVIEW

The IS4T, IS5T and IS6T are passive cube speakers for permanent installation, and have been designed with the

specic needs of installers in mind. They are essentially intended for the reproduction of high quality background

music in xed indoor and outdoor installations; available in black or white, the speakers have a look of discrete

elegance, making them perfectly suited to any commercial or institutional setting. Connection is quick and easy

thanks to the Eurobock (Phoenix) connectors. Its main features are:

• ergonomic, compact and versatile design

• supplied with a bracket for quick and easy wall mounting

• concealed mountings for unobtrusive installation

• wide acoustic coverage

• adjustable tilt angle

IS4T

The IS4T is equipped with a 4" full range woofer (VC 1").

IS5T

The IS5T is equipped with a 5" full range woofer (VC 1").

IS6T

The IS6T is equipped with a 6.5" woofer (VC 1.5") and a 0.75" compression driver (VC 1") in coaxial conguration.

USER INFORMATION

To use your IS diffuser in the best way, we recommend that you:

• read the Quick Start manual included in the package and all of this complete User Manual,

and keep them throughout the entire life of the product.

• register the product at http://www.dbtechnologies.com in the section “SUPPORT”.

• retain your proof of purchase and WARRANTY (User Manual “section 2”).

PACKAGE CONTENTS

Check that contents of the IS4T, IS5T or IS6T speaker package are complete. The package contains:

• IS4T, IS5T, or IS6T speaker

• quick start manual and warranty documentation

• mounting bracket

• screws and washers for fixing the speaker cabinet to the bracket

• n.2 Euroblock (Phoenix) flying female 2 pole 5.08mm pitch connectors

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

MECHANICAL AND ACOUSTIC FEATURES

DIMENSIONS AND WEIGHT

The IS series has been designed with particular attention to optimising the overall dimensions. The weight is just

2 kg for the IS4T, 2.8 kg for the IS5T and 4 kg for the IS6T.

The main dimensions are:

130 x 130 x 150mm (WxHxD) - IS4T model

160 x 160 x 180mm (WxHxD) - IS5T model

195 x 195 x 210mm (WxHxD) - IS6T model

195

201

120

195

245

210

W H D Ws Hs Ds

IS4T 130 mm 130 mm 150 mm 136 mm 170 mm 100 mm

IS5T 160 mm 160 mm 180 mm 166 mm 205 mm 110 mm

IS6T 195 mm 195 mm 210 mm 201 mm 245 mm 120 mm

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

MECHANICAL FEATURES

The threaded inserts on the two sides of the speaker which allow it to be fixed to the bracket supplied using the

two screws and rubber washers included in the package.

For the IS4T model, the bracket provides two possible mounting positions; on the IS5T and IS6T there are three

possible positions.

For further details, refer to the WALL MOUNTING section in this manual.

PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)

The speakers are protected against the ingress of solid objects and liquids with a rating of IP32 as dened by

EN 60529.

To guarantee this specication is met, the speakers must be installed facing downwards with a tilt angle of at

least 15° to the vertical.

The cables connecting the speakers to the amplier must have a diameter of at least 8 mm (0.31 inch).

Failure to comply with these installation prescriptions could adversely affect the declared

protection ratings.

ACOUSTIC COVERAGE

For the IS4T and IS5T, the coverage is 110°x110°, while the IS6T has a coverage of 100°x100°.

H V

IS4T 110° 110°

IS5T 110° 110°

IS6T 100° 100°

IMG_DISPERSIONE

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

2. CONNECTIONS

CONNECTING AND LINKING THE AUDIO SIGNAL

The audio input and link to another speaker are connected via Euroblock (Phoenix) connectors; the connectors

are protected under a metal panel that is easily removed by unscrewing the four screws securing it to the cabinet.

Connect the audio source (e.g., from an amplier or another speaker) to the INPUT terminal using the provided

female connectors respecting the polarity markings next to the connectors (positive to positive, negative to

negative). The audio signal can be linked to another speaker in a similar way: connect the LINK output of the

speaker to the INPUT terminal of the next speaker respecting the polarity (positive to positive, negative to

negative).

INPUT LINK

+-+-

AUDIO

SOURCE

PARALLEL

SPEAKER

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

3. INSTALLATION

WALL MOUNTING

The IS4T, IS5T and IS6T speakers are designed for wall mounting using the brackets supplied. Proceed as follows:

• hold the bracket against the wall, mark the centres of the

four holes in the bracket on the wall then drill the four

holes (materials not supplied)

• fix the bracket to the wall using suitable screws and

anchors (not supplied)

• align the supplied rubber washers with the two

threaded inserts on the sides of the speaker

• fasten the speaker to the bracket using the two

screws supplied in the correct position for the required tilt angle

CAUTION!

• Installation types other than those illustrated here are not allowed.

• Installation must be carried out by qualified personnel.

• The fixings used by the installer must be suitable for the type of wall to ensure stability

and safety.

• Always check that placement is stable and the installation is not a hazard to people,

animals or things.

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

4. TROUBLESHOOTING

The speaker does not produce any sound

1. Check that the audio signal input is connected correctly

2. Check that the connection cables are not damaged

3. Check that the audio source is powered on and clearly shows an output signal

5. TECHNICAL SPECIFICATIONS

GENERAL

IS4T IS5T IS6T

Type: Full range passive speaker Full range passive speaker Coaxial 2-way passive

speaker

Protection against solid

objects and liquids:

IP32

(minimum tilt angle 15°)

IP32

(minimum tilt angle 15°)

IP32

(minimum tilt angle 15°)

ACOUSTIC DATA

Frequency response

[-6 dB]: 110 – 20000 Hz 95 - 18000 Hz 85 - 20000 Hz

Sensitivity: 89 dB 92 dB 93 dB

Max SPL (@ 1m): 111 dB 116 dB 119 dB

LF: 4” 5” 6.5”

LF voice coil: 1” 1” 1.5”

HF: - - 0.75”

HF voice coil: - - 1”

Crossover frequency: - - 2.1 kHz

Directivity: 110°x110° 110°x110° 100°x100°

ELECTRICAL DATA

Rated impedance: 8 Ω 8 Ω 8 Ω

RMS power: 40 W 60 W 100 W

Peak power: 160 W 240 W 400 W

CONNECTIONS

Input: Euroblock (Phoenix) 2 pole

Link: Euroblock (Phoenix) 2 pole

English

IS4T-IS5T-IS6T Cod. 420120373 REV. 1.3

DIMENSIONS

Material: Wood cabinet, black/white paint nish

Grille: All metal – CNC machined

Installation: Wall-mounted on bracket

Mounting points: Integrated in sides of cabinet

Width: 130 mm (5.1 inch.) 160 mm (6.3 inch.) 195 mm (7.7 inch.)

Height: 130 mm (5.1 inch.) 160 mm (6.3 inch.) 195 mm (7.7 inch.)

Depth: 150 mm (5.9 inch.) 180 mm (7 inch.) 210 mm (8.3 inch.)

Weight: 2 kg (4.4 lbs.) 2.8 kg (6.17 lbs.) 4.8 kg (10.6 lbs.)

Product features, specications and appearance are subject to change without prior notice. dBTechnologies

reserves the right to make changes or improvements in design or manufacturing without any obligation to change

or improve previously manufactured products.

A.E.B. Industriale Srl

Via Brodolini, 8

Località Crespellano

40053 VALSAMOGGIA

BOLOGNA (ITALIA)

Tel +39 051 969870

Fax +39 051 969725

www.dbtechnologies.com

[email protected]

Deutsch

IS4T-IS5T-IS6T Code 420120373 REV. 1.3

INHALTSVERZEICHNIS

1. ALLGEMEINE HINWEISE ............................................................................................................21

WILLKOMMEN! ...........................................................................................................................21

KURZBESCHREIBUNG ..................................................................................................................21

HINWEISE FÜR DEN BENUTZER .................................................................................................21

INHALT DER VERPACKUNG .......................................................................................................... 22

MECHANISCHE UND AKUSTISCHE EIGENSCHAFTEN .................................................................22

ABMESSUNGEN UND GEWICHT ........................................................................................................................ 22

MECHANIK ......................................................................................................................................................... 23

SCHUTZ GEGEN FESTSTOFFE UND FLÜSSIGKEITEN (IP-SCHUTZART) .............................................................. 23

ABSTRAHLWINKEL ............................................................................................................................................. 23

2. ANSCHLÜSSE ...............................................................................................................................24

ANSCHLUSS UND WEITERLEITUNG DES AUDIOSIGNALS ..........................................................24

3. INSTALLATION ............................................................................................................................25

WANDMONTAGE .........................................................................................................................25

4. ERSTE FEHLERBEHEBUNG .........................................................................................................26

5. TECHNISCHE DATEN ................................................................................................................... 26

ALLGEMEINES .................................................................................................................................................... 26

AKUSTISCHE DATEN ........................................................................................................................................... 26

ELEKTRISCHE DATEN .......................................................................................................................................... 26

ANSCHLÜSSE ...................................................................................................................................................... 26

ABMESSUNGEN .................................................................................................................................................. 27