Samsung PS50B550 Manuale utente

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

BN68-02331A-03

BN68-02331A

Plasma TV

user manual

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre 

Web Site

AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02 201 2418

www.samsung.com/be (Dutch)

www.samsung.com/be_fr (French)

CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz

DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 30 - 6227 515 www.samsung.com/fi

FRANCE 01 4863 0000 www.samsung.com/fr

GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.de

HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu

ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no

POLAND

"0 801 1SAMSUNG(172678)

022-607-93-33"

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG(726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG(726-7864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se

Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min)

www.samsung.com/ch

www.samsung.com/ch_fr/(French)

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

BN68-02331A-Eng.indb 1 2009-10-22 �� 3:45:27

La pagina sta caricando ...

English - 4

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the oor N

because of possible damage to the screen. Always keep the PDP upright.

The PDP can rotate 20 degrees in right and left directions.

N

-20° ~ 20°

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

(2ea)

Power Cord Cloth-Clean Holder-Wire Cable Warranty Card/Safety

Guide Manual (Not

available in all locations)

Screw (4ea) Cover-Bottom Holder-Ring (4ea)

(Refer to page 41)

Ferrite Core for

Power Cord

Ferrite Core for

Headphone

Ferrite CoreThe ferrite cores are used to shield the cables from interference. N

When connecting a cable, open the ferrite core and clip it around the cable near the

plug as shown in the gure.

Connecting and Preparing Your TV

BN68-02331A-Eng.indb 4 2009-10-22 �� 3:45:30

English - 5

Viewing the Control Panel

The product colour and shape may vary depending on the model. N

Front Panel buttons

Touch each button to

operate.

1

SOURCE

Toggles between all the available input sources

(TV, Ext1, Ext2, AV, PC, Component, HDMI1, HDMI2/DVI,

HDMI3, HDMI4, USB).

In the on-screen menu, use this button as you would use

N

the ENTER

E

button on the remote control.

2

MENU

Press to see an on-screen menu of your TV’s features.

3

+ –

Press to increase or decrease the volume. In the on-screen

menu, use the + – buttons as you would use the

◄ and ► buttons on the remote control.

4

CH

Press to change channels. In the on-screen menu, use the

CH buttons as you would use the ▲ and ▼ buttons

on the remote control.

5

POWER INDICATOR

Blinks and turns off when the power is on and lights up in

stand-by mode.

6

(

POWER)

Press to turn the TV on and off.

7

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

8

SPEAKERS

BN68-02331A-Eng.indb 5 2009-10-22 �� 3:45:30

La pagina sta caricando ...

English - 10

Viewing the Menus

1. With the power on, press the MENU button. The main menu appears on the

screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,

Application, Support.

2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER

E

button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

N

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on

which external input mode you are viewing.

1. Press the TOOLS button. The Tools menu will appear.

2. Press the ▲ or ▼ button to select a menu, then press the ENTER

E

button.

3. Press the ▲ / ▼ / ◄ / ► / ENTER

E

buttons to display, change, or use the selected

items. For a more detailed description of each function, refer to the corresponding

page.

Anynet •

+

(HDMI-CEC), see page 36

Picture Mode, see page 16 •

Sound Mode, see page 21 •

Sleep Timer, see page 23 •

SRS TS HD, see page • 21

Energy Saving, see page 25 •

Add to Favourite (or Delete from Favourite), see page 14 •

Auto Adjus • tment, see page 19

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the

O INFO button to viewing the information.

Press the INFO button on the remote control. The TV will display the channel, the type of

sound, and the status of certain picture and sound settings.

▲, ▼: You can view other channel’s information. If you want to move to the currently •

selected channel, press ENTERE button.

◄, ►: You can view the desired program’s information at the current channel. •

Press the

N INFO button once more or wait approximately 10 seconds and the display

disappears automatically.

Mode : Standard

Cell Light : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS HD : Off

Energy Saving : Off

Add to Favourite

U

Move

E

Enter

e

Exit

DTV Air

15

abc1

18:00 ~ 6:00

18:11 Thu 6 Jan

Life On Venus Avenue

Unclassified

No Detaild Information

E Watch

' Information

BN68-02331A-Eng.indb 10 2009-10-22 �� 3:45:35

La pagina sta caricando ...

English - 13

Cable Search Option

❑

You can add directly the channel search range in the network search mode. (Dependingon the each country)

Freq.Start • : Displays the frequency start values.

Freq.Stop • : Displays the frequency stop values.

Modulation • : Displays available modulation values.

Symbol Rate • : Displays available symbol rates.

If the

N Freq.Start value is bigger than Freq.Stop value, the warning message is displayed.

Full Guide / Mini Guide

❑

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out

of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information

becomes available.

Full Guide • : Displays the programme information as time ordered One hour

segments. One hours of programme information is displayed which may be scrolled

forwards or backwards in time.

Mini Guide • : The information of each programme is displayed by each line on the

current channel Mini Guide screen from the current programme onwards according

to the programme starting time order.

Default Guide

❑

Mini Guide / Full Guide 

You can decide whether to display either the Mini Guide or the Full Guide when the

GUIDE button on the remote control is pressed.

You can also display the guide menu simply by pressing the

O GUIDE button.

Using the Full / Mini Guide

▲ / ▼ / ◄ / ►

,

ENTER

Select a programme by pressing the ▲/▼/◄/►/ENTERE button.

RED Toggle between the Mini Guide or Full Guide.

GREEN Full Guide: Scroll backwards quickly (-24 hours).

YELLOW Full Guide: Scroll forwards quickly (+24 hours).

BLUE Exit the guide.

INFO INFO button for the detailed information.

Channel

❑

Mode

When the press the P (</>) button, Channels will be switched within the selected channel list.

Added Ch.:



Channels will be switched within the memorised channel list.

Favourite Ch.:



Channels will be switched within the favourite channel list.

Fine Tune

❑

(Analogue channel only)

If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store

operation. If the signal is weak or distorted, you may have to ne tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk

N * on the right-hand side of the channel number in the

channel banner.

If you do not store the ne-tuned channel in memory, adjustments are not saved.

N

To reset the ne-tuning, select N Reset by pressing the ▼ button and then press the ENTER

E

button.

Channel

Full Guide

Mini Guide

Default Guide : Full Guide ►

Channel List

Channel Mode : Added Ch.

Fine Tune

Full Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun

Freshmen On Campus

2:00 - 2:30

No Detailed Information

Today 2:00 - 3:00 3:00 - 4:00

Mint Extra

Loaded

Fresh 40 with Dynamite MC

The Distillery

Smash Hits! Sunday

900 f tn

901 ITV Play

902 Kerrang!

903 Kiss

903 oneword

903 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

Freshmen O..

Watch

Information

Page



Mini Guide



+24 Hours



Exit

Mini Guide DTV Cable 900 f tn

Street Hypnosis

Booze Britain

2:00

2:30

5:00

▼

Freshmen On Campus

Watch

Information

Page



Full Guide



Exit

BN68-02331A-Eng.indb 13 2009-10-22 �� 3:45:36

English - 14

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme

guide for digital broadcasts.

Select a channel in the

N All Channels, Added Channels, Favourites, or Programmed

screen by pressing the ▲ / ▼ buttons, and pressing the ENTER

E

button.

Then you can watch the selected channel.

All Channels • : Shows all currently available channels.

Added Channels • : Shows all added channels.

Favourites • : Shows all favourite channels.

Programmed • : Shows all current reserved programmes.

Press the

O CH LIST button on the remote control to bring up the channel lists.

Using the Colour buttons with the Channel List

N

Red - (Channel Type): Toggle between your TV, Radio, Data/Other and All.

Green - (Zoom): Enlarges or shrinks a channel number.

Yellow - (Select): Selects multiple channel lists.

T - (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from

Favourite), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort,

Lock (or Unlock), Select All (or Deselect All), or Auto Store menu.

(The Tools menus may differ depending on the situation.)

Channel Status Display Icons

N

A

An Analogue channel.

c

A channel selected by pressing the

yellow button.

♥

A channel set as a Favourite.

(

A programme currently being

broadcast.

\

A locked channel.

)

A reserved programme

Channel List Tools Menu (

❑

in All Channels / Added Channels / Favourites)

Press the N TOOLS button to use the option menu.

The

N Tools menu items may differ depending on the channel status.

Add / Delete 

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on

N All Channels menu.

A gray-coloured channel indicates the channel has been deleted.

N

The N Add menu only appears for deleted channels.

You can also delete a channel to the

N Added Channels or Favourite menu in the

same manner.

Add to Favourite / Delete from Favourite 

You can set channels you watch frequently as favourites.

Press the

T

TOOLS button to display Tools menu.

You can also add the favourite channel by selecting Tools → Add to Favourite

(or Delete from Favourite).

To select the Favourite channels you have set up, press the

O FAV.CH button on the

remote control.

The “♥” symbol will be displayed and the channel will be set as a favourite.

N

All favourite channels will be shown on Favourite menu. N

Lock / Unlock 

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is

set to on. (see page 25)

The PIN number input screen appears. Enter your 4 digit PIN number.

N

The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu. N

The “ N \” symbol will be displayed and the channel will be locked.

Channel

Mini Guide

Default Guide : Full Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C

--

A

3

♥

C

--

A

4 C

--

A

5 C

--

A

6 C

--

A

7 C

--

A

8 C

--

Added Channels

All



Channel Type



Zoom



Select

Tools

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C

--

A

3

C

--

A

4 C

--

A

5 C

--

A

6 C

--

A

7 C

--

A

8 C

--

All Channels

All



Channel Type



Zoom



Select

Tools

Delete

Add to Favourite

Lock

Timer Viewing

Edit Channel Name

Sort

▼

Continued...

BN68-02331A-Eng.indb 14 2009-10-22 �� 3:45:36

English - 15

Timer Viewing 

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a programme set the current time rst. (See page 23)

Only memorised channels can be reserved.

N

You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control. N

Reserving a programme will be shown on N Programmed menu.

Digital Programme Guide and Viewing Reservation

N

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears.

You can reserve a programme according to the procedures described above.

Edit Channel Name  (Analogue channel only)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled. N

Edit Channel Number  (Digital channel only)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort  (Analogue channel only)

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using

the auto store.

Select All / Deselect All 

You can perform the Add / Delete, Add to Favourites / Delete from Favourites, or Lock / Unlock function for multiple channels at N

the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.

The

N c mark appears to the left of the selected channels.

You can only select

N Deselect All when there is a selected channel.

Auto Store 

For further details on setting up options, refer to page 12. N

If a channel is locked using the N Child Lock function, the PIN input window appears.

Channel List Option Menu (

❑

in Programmed )

You can view, modify or delete a reservation.

Press the

N TOOLS button to use the option menu.

Change Info  : Select to change a viewing reservation.

Cancel Schedules

 : Select to cancel a viewing reservation.

Information

 : Select to view a viewing reservation. (You can also change the

reservation information.)

Select All / Deselect All

 : Select or deselect all reserved programmes.

Programmed

1 / 1 / 2009

13:59 5 TV1 Quincy, M.E

18:59 2 TV3 The Equalizer

20:59 2 TV3 McMillan & Wife

21:59 2 TV3 M.Spillane’s mike Hammer

Change Info

Cancel Schedules

Information

Select All

All



Zoom



Select

Tools

Information

BN68-02331A-Eng.indb 15 2009-10-22 �� 3:45:36

La pagina sta caricando ...

English - 19

Setting up the TV with your PC

Preset: Press the N SOURCE button to select PC mode.

Auto Adjustment

❑

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video

signal. The values of ne, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode.

N

Press the

T

TOOLS button to display Tools menu.

You can also set the adjustment by selecting Tools → Auto Adjustment.

Screen

❑

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,

then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture

so that it is aligned on the center of screen.

Coarse 

Adjusts the frequency when vertical noise appears on the screen.

Fine 

Adjusts the screen to be clearer.

PC Position 

Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position.

Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset 

You can replace all image settings with the factory default values.

Brightness : 45

Sharpness : 50

Auto Adjustment ►

Screen

Advanced Settings

Picture Options

Picture Reset

Picture

BN68-02331A-Eng.indb 19 2009-10-22 �� 3:45:37

English - 20

PC Display

Setting Up Your PC Software (Based on Windows XP)

❑

The Windows display-settings for a typical computer are shown below. The actual

screens on your PC will probably be different, depending upon your particular version

of Windows and your particular video card. However, even if your actual screens

look different, the same basic set-up information will apply in almost all cases. (If not,

contact your computer manufacturer or Samsung Dealer.)

1. First, click on ‘Control Panel’ on the Windows start menu.

2. When the control panel window appears, click on ‘Appearance and Themes’ and a

display dialog-box will appear.

3. When the control panel window appears, click on ‘Display’ and a display dialog-box

will appear.

4. Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution)

Optimum: 1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct

value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

❑

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) jack.

N

The interlace mode is not supported.

N

The set might operate abnormally if a non-standard video format is selected.

N

Separate and Composite modes are supported. SOG is not supported.

N

Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).

N

D-Sub and HDMI/DVI Input 

Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V)

IBM

640 x 350 31.469 70.086 25.175 + / -

720 x 400 31.469 70.087 28.322 - / +

MAC

640 x 480 35.000 66.667 30.240 - / -

832 x 624 49.726 74.551 57.284 - / -

1152 x 870 68.681 75.062 100.000 - / +

VESA CVT

720 x 576 35.910 59.950 32.750 - / +

1152 x 864 53.783 59.959 81.750 - / +

1280 x 720

44.772 59.855 74.500 - / +

56.456 74.777 95.750 - / +

1280 x 960 75.231 74.857 130.000 - / +

VESA DMT

640 x 480

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

800 x 600

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

1024 x 768

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

1152 x 864 67.500 75.000 108.000

+ / +

1280 x 800

49.702 59.810 83.500

- / +

62.795 74.934 106.500

- / +

1280 x 960 60.000 60.000 108.000

+ / +

1280 x 1024

63.981 60.020 108.000

+ / +

79.976 75.025 135.000

+ / +

1360 x 768 47.712 60.015 85.500

+ / +

1440 x 900

55.935 59.887 106.500

- / +

70.635 74.984 136.750

- / +

1680 x 1050 65.290 59.954 146.250

- / +

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500

+ / +

VESA GTF

1280 x 720 52.500 70.000 89.040

- / +

1280 x 1024 74.620

70.000

128.943

- / -

BN68-02331A-Eng.indb 20 2009-10-22 �� 3:45:37

English - 21

Changing the Sound Setting

Mode

❑

You can select the type of special sound effect to be used when watching a given

broadcast.

Standard / Music / Movie / Clear Voice / Custom



Press the T TOOLS button to display Tools menu.

You can also congure the sound mode by selecting Tools → Sound Mode.

Equalizer

❑

The sound settings can be adjusted to suit your personal preferences.

Mode  : You can select a sound mode to suit your personal preferences.

Balance

 : Controls the balance between the right and left speakers.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz

 (Bandwidth Adjustment): Adjusts the level of different bandwidth frequencies

Reset

 : Resets the equalizer settings to the default values.

SRS TruSurround HD → Off / On

❑

SRS TruSurround HD is the combined technology of TruSurround and FOCUS, TruBass.

SRS TruSurround HD is down mixing technology that makes the Surround Sound effect of virtual 5.1 channel via two speakers.

This function provide not only rich deep bass at a low-pitched sound but also improve the resolution at a high-pitched sound.

Press the

T

TOOLS button to display Tools menu.

You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD.

TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.

TruSurround HD technology is incorporated under license from SRS Labs, Inc.

If the sound is abnormal while TV is playing music, please adjust the equalizer and

N SRS TruSurround HD (Off/On).

Audio Language

❑

(Digital channel only)

You can change the default value for audio languages. Displays the language information for the incoming stream.

You can only select the language among the actual languages being broadcast.

N

Audio Format → MPEG / Dolby Digital

❑

(Digital channel only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed

difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

You can only select the language among the actual languages being broadcast.

N

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Audio Description

❑

(Digital channel only)

This is an auxiliary audio function that provides an additional audio track for visually

challenged persons. This function handles the Audio Stream for the AD (Audio

Description), when it is sent along with the Main audio from the broadcaster. Users can

turn the Audio Description On or Off and control the volume.

You can select these options simply by pressing the

O

AD button on the remote control.

Audio Description → Off / On 

Turn the audio description function on or off.

Volume 

You can adjust the audio description volume.

Volume

N is active when Audio Description is set to On.

Sound Control

Mode : Custom

►

Equalizer

SRS TruSurround HD : Off

Audio Language : ----

Audio Format : ----

Audio Description

Auto Volume : Off

Speaker Select : TV Speaker

Sound

BN68-02331A-Eng.indb 21 2009-10-22 �� 3:45:38

English - 22

Auto Volume → Off / On

❑

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select → External Speaker / TV Speaker

❑

If you want to hear the sound through separate speakers, cancel the internal amplier.

The

N – +, M MUTE buttons do not operate when the Speaker Select is set to External Speaker.

If you select

N External Speaker in the Speaker Select menu, the sound settings will be limited.

TV's Internal Speakers

Audio Out (Optical, L / R Out) to Sound System

TV / Ext. / AV / Component / PC / HDMI

TV Speaker Speaker Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

Sound Reset

❑

Reset All / Reset Sound Mode / Cancel  :

You can restore the Sound settings to the

factory defaults.

Selecting the Sound Mode

When you set to Dual l ll, the current sound mode is displayed on the screen.

Type of broadcast

On-screen indication

NICAM

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Regular + NICAM Mono

NICAM

Mono

(Normal)

NICAM-Stereo

NICAM

Stereo

Mono

(Normal)

NICAM Dual-I/II

NICAM

Dual-1

NICAM

Dual-2

Mono

(Normal)

A2

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Bilingual or DUAL-I/II

Dual I Dual II

Stereo Stereo

Mono

(Forced mono)

If the stereo signal is weak and an automatic switching occurs, then switch to the mono. N

This function is only activated in stereo sound signal. It is deactivated in mono sound signal. N

This function is only available in N TV mode.

You can select these options simply by pressing the

O DUAL button on the remote control.

Auto Volume : Off

Speaker Select : TV Speaker

Sound Reset ►

Sound

BN68-02331A-Eng.indb 22 2009-10-22 �� 3:45:38

La pagina sta caricando ...

English - 27

Source List / Edit Name

Source List

❑

Use to select TV or other external input sources such as DVD players or Cable Box /

Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of

your choice.

TV, Ext.1, Ext.2, AV, Component, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB. 

You can choose only those external devices that are connected to the TV. In the N

Source List, connected inputs will be highlighted and sorted to the top. Inputs that

are not connected will be sorted to the bottom.

Using the Colour buttons on the remote with the Source list

N

- Red (Refresh): Refreshes the connecting external devices.

- T (Tools): Displays the Edit Name and Information menus.

Press the

O SOURCE button on the remote control to view an external signal

source.

Edit Name

❑

You can name the device connected to the input jacks to make your input source selection easier.

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / 

Blu-ray / HD DVD / DMA

When a PC with a resolution of 1920 x 1080@60Hz is connected to the N HDMI IN 2(DVI) port, you should set the HDMI2 / DVI

mode to PC in the Edit Name of the Input mode.

Alternative Software 

Replace the current software with the alternative.

If software was changed, existing software is displayed.

N

You can change current software to alternative software by Alternative Software. N

HD Connection Guide

❑

The brief instruction on How to get the best performance from your new HDTV is displayed. We offer the connection method for

HD devices.

You can move the previous or next page by pressing the ◄ or ► button.

N

Contact Samsung

❑

You can know the Samsung Call center, website and information for product.

Source List

Edit Name

Input

BN68-02331A-Eng.indb 27 2009-10-22 �� 3:45:39

La pagina sta caricando ...

English - 29

Using the Media Play Function

This function enables you to view and listen to photo, music files saved on a USB Mass Storage Class (MSC) device.

It might not work properly with unlicensed multimedia files.

Entering the Media Play Menu

❑

1. Press the MENU button. Press the ▲ or ▼ button to select Application, then

press the ENTER

E

button.

2. Press the ▲ or ▼ button to select Media Play (USB), then press the ENTER

E

button.

The

N

Media Play menu is displayed.

Press the

O SOURCE button on the remote control repeatedly to select USB,

then press the ENTER

E

button.

Press the

O MEDIA.P button on the remote control to display the Media Play

menu.

3. Press the Red button, then press the ▲ or ▼ button to select the corresponding

USB Memory Device (i.e. if connected through a hub). Press the ENTER

E

button.

This function differs depending on the USB Memory Device connected to TV.

N

The selected USB device name appears at the bottom left of the screen.

N

4. Press the ◄ or ► button to select an icon (Photo, Music, Setup), then press

the ENTER

E

button.

To exit

N

Media Play mode, press the MEDIA.P button on the remote control.

Removing a USB Memory Device Safely

❑

You can remove the device safely from the TV.

1. Press the TOOLS button in the Media Play le list screen, or while a Slide Show

or music le is being played.

2. Press the ▲ or ▼ button to select Remove Safely, then press the ENTER

E

button.

3. Remove the USB device from the TV.

Screen Display

❑

1. Currently selected le: The currently selected le is highlighted.

2. View Groups: The sorting group including the currently selected photo is highlighted.

One group involves the nine photos.

N

3. Current Device: Shows the currently selected device name.

Red (

N Device) button: Selects a connected device.

4. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow button.

5. Help Items

Yellow • (Select) button: Selects le from the le list. Selected les are marked with a symbol c. Press the yellow button

again to cancel a le selection.

• TOOLS (Tools) button: Displays the option menus. (The tools menu changes according to the current status.)

R • RETURN (Return) button: Return to previous menu.

Media Play

Photo Music Setup

PHOTO

USB : USB name

148.48MB/995.00MB Free

R

Return

USB



Device

IMG_0335.JPG

4/6

IMG_0349.

JPG

▶

IMG_0346.

JPG

1

IMG_0345.

JPG

1

Slide Show

Play Current Group

Information

Remove Safely

USB



Device

Select

T

Tools R Upper Folder

IMG_0343.

JPG

▶

IMG_03496.

JPG

IMG_03496.

JPG

IMG_0335.JPG

1/67

▶

◀

IMG_03496.

JPG

1

2

3

1File(s) Selected

4

5

USB



Device

Select

T

To ols R Upper Folder

▶

1

USB

BN68-02331A-Eng.indb 29 2009-10-22 �� 3:45:43

English - 30

Using and Sorting Photo List

You can sort photos in the Photo List by a particular standard.

1. Press the MEDIA.P button on the remote control to display the Media Play menu.

2. Press the ◄ or ► button to select Photo, then press the ENTER

E

button.

3. Press the

(Play)/

ENTER

E

button to start the Slide Show in the order selected

by the user.

The information of a photo le is automatically set.

N

Photos for which information cannot be displayed are set as N Unclassified.

PTP does not support folder sort mode.

N

Photo List Tools Menu

❑

Slide Show 

You can play a Slide Show using the photo les on the USB memory device.

Play Current Group 

You can play a Slide Show using only the photo les in the currently selected sorting

group.

Information 

The photo le information including the name, the size, the resolution, the date

modied and the path is displayed.

You can view the information of photo les during a Slide Show using the same

N

procedures.

Alternatively, select a photo from the photo list and press the

O INFO button to view

the information.

Remove Safely 

You can remove the device safely from the TV.

Using the Remote Control Button in Media Play Menu

❑

Button Operations

▲/▼/◄/► Move the cursor and select an item.

ENTER

E

Select the currently selected item.

Play or pause the files while playing the slide show or music files.

Play or pause the Slide Show or Music file.

RETURN

Return to the previous menu.

TOOLS

Run various functions from the Photo, Music and Movie menus.

Stop the current slide show, Music or Movie file.

Jump to previous group/Jump to next group.

INFO

Show file information.

MEDIA.P

Exit Media Play mode.

P

/

Stop Media Play mode and Returns to TV mode.

EXIT

Stop the current function and return to the Media Play main menu.

IMG_0343.

JPG

▶

IMG_03496.

JPG

IMG_03496.

JPG

IMG_0335.JPG

1/67

▶

◀

IMG_03496.

JPG

USB



Device

Select

T

T o ols R Return

▶

1

USB

IMG_0335.JPG

4/6

IMG_0349.

JPG

▶

IMG_0346.

JPG

1

IMG_0345.

JPG

1

Slide Show

Play Current Group

Information

Remove Safely

USB



Device

Select

T

Tools R Return

BN68-02331A-Eng.indb 30 2009-10-22 �� 3:45:47

La pagina sta caricando ...

English - 32

Using and Sorting the Music List

You can sort music files in the Music List by a particular standard.

1. Press the MEDIA.P button on the remote control to display the Media Play menu.

2. Press the ◄ or ► button to select Music, then press the ENTER

E

button.

3. Press the ENTER

E

button to start playing music in the order selected by the user.

The information of the music les is automatically set.

N

Music les for which information cannot be displayed are set to Unclassied. N

If there is no title information for a music le, the lename is displayed. N

Music List Tools Menu

❑

Play Current Group 

You can only play music les in the currently selected sorting group.

Information 

The music le information including the name, the size, the date modied and the

path is displayed.

Alternatively, select a music le from the music list and press the

O INFO button to

view the information.

Remove Safely 

You can remove the device safely from the TV.

1

When I Dream

3/4

Energetic

Carol kidd

Mr A-Z

2005

Pop

Heaven

usermanual

NPKI

▶

1

▶

USB



Device

Select

T

To ols R Upper Folder

T

Tools R Upper FolderSelect

1

▶

USB

Sky

When I Dream

3/4

Energetic

Carol kidd

Mr A-Z

2005

Pop

NPKI

Heavenusermanual

NPKI

Play Current Group

Information

Remove Safely

USB



Device

Select

T

Tools R Upper Folder

BN68-02331A-Eng.indb 32 2009-10-22 �� 3:45:48

La pagina sta caricando ...

English - 34

Picture / Music Settings Using Media Play

When watching a Slide Show or listening to music using Media Play, you can set the picture and sound.

Picture Setting

❑

1. Press the TOOLS button during a Slide Show or while music is playing.

2. Press the ▲ or ▼ button to select Picture Setting.

3. Press the ◄ or ► button to select the Picture Mode

(Dynamic, Standard, Eco, or Movie).

When selecting

N

Dynamic, Eco, you can't adjust Dynamic Contrast, Black

Tone.

4. Press the ▲ or ▼ button to move to an item.

(Contrast, Brightness, Colour, Dynamic Contrast, Black Tone, or Reset)

Select Reset to initialize the picture settings.

N

5. Press the ◄ or ► button to adjust the settings.

Sound Setting

❑

1. Press the TOOLS button during a Slide Show or while music is playing.

2. Press the ▲ or ▼ button to select Sound Setting.

3. Press the ◄ or ► button to select the Sound Mode.

(Standard, Music, Movie, Clear voice, or Custom)

4. Press the ▲ or ▼ button to move to an item.

(Balance, 100Hz, 300Hz, 1kHz, 3kHz,10kHz (Bandwidth Adjustment), or Reset)

Select Reset to initialize the sound settings.

N

5. Press the ◄ or ► button to adjust the settings.

Using the Setup Menu

Setup displays the user settings of the Media Play menu.

1. Press the MEDIA.P button on the remote control to display the Media Play menu.

2. Press the ◄ or ► button to select Setup, then press the ENTER

E

button.

3. Press the ▲ or ▼ button to select the desired option.

4 . Press the ◄ or ► button to select the option, then press the ENTER

E

button.

To exit

N Media Play mode, press the MEDIA.P button on the remote control.

Music Repeat Mode  → On / Off

Select to repeatedly play music les.

Screen Saver Run Time  → 10 min / 20 min / 1 hour

Select to set the waiting time before the screen saver appears.

Information 

Select to viewing the information of the connected device.

Remove Safely 

You can remove the device safely from the TV.

Picture Setting

Picture Mode ◄ Standard ►

Contrast : 95

Brightness : 45

Color : 50

Dynamic Contrast : Medium

Black Tone : Off

Reset

U

Move

L

Adjust

E

Enter

R

Return

Sound Setting

Sound Mode ◄ Custom ►

Balance : L50 R50

100Hz : 0

300Hz : 0

1KHz : 0

3KHz : 0

10KHz : 0

Reset

U

Move

L

Adjust

E

Enter

R

Return

Media Play

USB : USB name

851.98MB/995.00MB Free

SETUP

Photo Music Setup

e

Exit

USB



Device

U

Move

lr

Adjust

R

Return

Music Repeat Mode ◄ Off ►

Screen Saver Run Time 10 min

Information

Remove Safely

USB



Device

BN68-02331A-Eng.indb 34 2009-10-22 �� 3:45:49

La pagina sta caricando ...

English - 40

The teletext pages are organized according to six categories:

Part Contents

A Selected page number.

B Broadcasting channel identity.

C Current page number or search indications.

D Date and time.

E Text.

F Status information.

FASTEXT information.

Teletext information is often divided between several pages displayed in sequence,

N

which can be accessed by:

Entering the page number -

Selecting a title in a list -

Selecting a coloured heading (FASTEXT system) -

Press the

O TV button to exit from the teletext display.

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor.

When attaching to other building materials, please contact your nearest dealer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

Product Family inch VESA Spec. (A * B) Standard Screw Quantity

LCD-TV

19" ~22" 100 * 100

M4

4

23"~29" 200 * 100

30"~40" 200 * 200 M6

46"~55" 400 * 400

M857"~70" 800 * 400

80" ~ 1400 * 800

PDP-TV

42"~ 50" 400 * 400

M8 4

58"~ 63" 600 * 400

70" ~ 800 * 400

80" ~ 1400 * 800

We provided the standard dimensions for wall mount kits as shown in the table above.

N

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. N

Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. N

For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ depending on N

their specications.

Do not use screws that do not comply with the VESA standard screw specications.

N

Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the consumer

N

fails to follow the product installation instructions.

Our 57” and 63” models do not comply with VESA Specications. Therefore, you should use our dedicated wall mount kit for this

N

model.

Do not exceed 15 degrees tilt when mounting this TV.

N

Do not install your Wall Mount Kit while your TV is turned on.

It may result in personal injury due to electric shock.

BN68-02331A-Eng.indb 40 2009-10-22 �� 3:45:51

La pagina sta caricando ...

English - 46

Specifications

The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without

notice.

Model Name PS50B550 / PS50B551

Screen Size (Diagonal) 50 inch

PC Resolution (Optimum) 1920 x 1080 @ 60 Hz

Sound (Output) 10 W x 2

Dimension (W x H x D)

Body

With stand

1240 x 766 x 74 mm

1240 x 822 x 290 mm

Weight

Body

With stand

33 kg

38 kg

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50 °F to 104 °F (10 °C to 40 °C)

10% to 80%, non-condensing

-4 °F to 113 °F (-20 °C to 45 °C)

5% to 95%, non-condensing

This device is a Class B digital apparatus.

N

Design and specications are subject to change without prior notice. N

For the power supply and Power Consumption, refer to the label attached to the product. N

BN68-02331A-Eng.indb 46 2009-10-22 �� 3:45:56

La pagina sta caricando ...

Français - 4

Utilisation de la base-support

L’écran à plasma doit être soulevé par au moins deux personnes. Ne posez N

jamais l’écran à plasma sur le sol, car cela pourrait l’endommager. Conservez

toujours l’écran en position verticale.

L’écran à plasma peut pivoter de 20 degrés vers la droite et la gauche. N

-20° ~ 20°

Branchement et installation de votre téléviseur

Vérification des pièces

Manuel

d’utilisation

Télécommande / Piles

AAA (2ea)

Cordon d’alimentation Chiffon de

nettoyage

Serre-câbles Carte de garantie /

Manuel de sécurité

(non disponible dans tous

les pays)

Vis (4ea) Capot inférieur Anneau de support

(4ea)

(Reportez-vous à la

page 41)

Blindage

magnétique

pour cordon

d’alimentation

Blindage magnétique

de casque

Blindage magnétique N

Le blindage magnétique sert à protéger les câbles des interférences. Lors de la

connexion d’un câble, ouvrez le blindage magnétique et rabattez-le autour du câble près

de la prise comme illustré.

BN68-02331A-FRA.indb 4 10/21/2009 10:00:22 AM

La pagina sta caricando ...

Français - 10

Affichage des menus

1. Une fois l’appareil allumé, appuyez sur le bouton MENU. Le menu principal apparaît

à l’écran. Plusieurs icônes s’afchent sur le côté gauche du menu : Image, Son,

Canal, Conguration, Entrée, Application, Assistance.

2. ENTER

E

Appuyez sur la touche ▲ ou ▼ pour sélectionner l’une des icônes.

Appuyez ensuite sur le bouton ENTER

E

pour accéder au sous-menu de l’icône.

3. Appuyez sur le bouton EXIT pour quitter le menu.

Les menus disparaissent de l’écran après environ une minute. N

Utilisation du bouton TOOLS

Vous pouvez utiliser le bouton TOOLS pour sélectionner simplement et rapidement les fonctions que vous utilisez le plus souvent.

Le menu Outils change en fonction du mode d’entrée externe affiché.

1. Appuyez sur le bouton TOOLS. Le menu Outils s’afche.

2. Appuyez sur le bouton ▲ ou ▼ pour sélectionner un menu, puis appuyez sur le

bouton ENTER

E

.

3. Appuyez sur les boutons ▲ / ▼ /

◄

/

►

/ ENTER

E

pour afcher, changer ou utiliser les

options de menu sélectionnés. Pour une description plus détaillée de chaque fonction,

reportez-vous à la page correspondante.

Anynet •

+

(HDMI-CEC), voir page 36

Mode Image, voir page 16 •

Mode Son, voir page 21 •

Veille, voir page 23 •

SRS TS HD, voir page • 21

Mode éco., voir page 25 •

Ajouter aux favoris (ou Supprimer des favoris), voir page 14 •

Réglage Automatique, voir page 19 •

Visualisation de laffichage

L’affichage identifie la chaîne en cours et l’état de certains paramètres audio et vidéo.

Appuyez sur le bouton O INFO pour afcher les informations.

Appuyez sur le bouton INFO de la télécommande. La télévision affiche la chaîne,

le type de son et l’état de certains paramètres de son et d’image.

▲, ▼: Vous pouvez afcher des informations relatives à une autre chaîne. •

Pour accéder à la chaîne actuellement sélectionnée, appuyez sur le bouton

ENTERE.

◄, ►: Vous pouvez afcher les informations relatives au programme souhaité de la •

chaîne actuelle.

Appuyez de nouveau sur le bouton N INFO ou attendez environ 10 secondes

pour que l'affichage disparaisse automatiquement.

Outils

Anynet+ (HDMI-CEC)

Mode Image : Standard

Mode Son : Personnel

Veille : Arrêt

SRS TS HD : Arrêt

Mode éco. : Arrêt

Réglage Automatique

U

Dépl.

E

Entrer

e

Quitter

DTV Air

15

abc1

18:00 ~ 6:00

18:11 Thu 6 Jan

Life On Venus Avenue

Unclassified

No Detaild Information

E Watch

' Information

Mode : Standard

Lum. Cellules : 7

Contraste : 95

Luminosité : 45

Netteté : 50

Couleur : 50

Teinte (V/R) : V50/R50

Paramètres avancés

Image

BN68-02331A-FRA.indb 10 10/21/2009 10:00:31 AM

La pagina sta caricando ...

Samsung PS50B550 Manuale utente

Samsung PS50B550 Manuale utente

in altre lingue

Documenti correlati

Altri documenti