Behringer AB100 Manuale utente

Categoria
Accessori per chitarra
Tipo
Manuale utente
INSTRUMENT/AMP SELECTOR AB100
Thank you for showing your confidence in us by purchasing the BEHRINGER
INSTRUMENT/AMP SELECTOR AB100. This high-quality instrument and amp switch
is designed for both guitar & bass players who use several amps or instruments.
The AB100 allows you to switch between gear noiselessly and instantaneously,
adjusting individual volume settings without coloring the sound of your instrument.
1. CONTROLS
Controls and connections
IN 1: this 1/4" TS jack is the first AB100 input. Plug in an instrument here
(guitar, bass, etc.).
OUT A: this 1/4" TS jack is the first AB100 output. Plug in an amp or an effect
here.
OUT B / IN 2: this 1/4" TS jack can be used as a second output or a second
input, depending on the position of selector .
The MODE selector adapts the AB100 to your system: If you play one
instrument and two amps, set MODE in the upper position to get one input for
two outputs. In this case, connector serves as a second output (OUT B).
Otherwise, if you play two instruments and one amp, set MODE in the lower
position to get two inputs for one output. In that case, connector serves
as a second input (IN 2).
Use the A LEVEL button to set the volume of OUT A. The output is active when
the green LED is lit.
When MODE is in the upper position, use the B LEVEL button to set the volume
of OUT B. The output is active when the red LED is lit.
Use the footswitch to noiselessly and instantaneously toggle between two
amps (MODE selector in the upper position) or two instruments (MODE selector
in the lower position).
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+ The AB100 has no on/off switch. As soon as you insert the jack into the IN
connector, the AB100 begins running. When not using the AB100, remove
the jack from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom of the unit.
INSTRUMENT/AMP SELECTOR AB100
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time
of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER
®
nor affiliation of the
trademark owners with BEHRINGER
®
. BEHRINGER
®
accepts no liability for any loss which may be suffered by any person who relies
either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER
®
and have
absolutely no authority to bind BEHRINGER
®
by any express or implied undertaking or representation. No part of this manual may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind,
for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER
®
is a registered
trademark. ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877
Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
3. SPECIFICATIONS
In 1
Connector 1/4" TS
Impedance 500 kW
Out A
Connector 1/4" TS
Impedance 2.2 kW
In 2/Out B
Connector 1/4" TS
Impedance In 2 500 kW
Impedance Out B 2.2 kW
Power supply 9 V, 100 mA DC regulated
PSU-SB-CN BEHRINGER 220 VAC adaptor China
PSU-SB-EU BEHRINGER 230 VAC adaptor Europe
PSU-SB-JP BEHRINGER 100 VAC adaptor Japan
PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia
PSU-SB-UK BEHRINGER 240 VAC adaptor UK
PSU-SB-UL BEHRINGER 115 VAC adaptor USA
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 25 mA
Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
Weight approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may
be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those
listed or shown.
4. SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.
Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté
reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente
cuando la fuente o el cable de alimentación estén dañados.
Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com
  • Page 1 1
  • Page 2 2

Behringer AB100 Manuale utente

Categoria
Accessori per chitarra
Tipo
Manuale utente

in altre lingue