Aeg-Electrolux HG995440XB Manuale utente

Marca: Aeg-Electrolux

Modello: HG995440XB

Categoria: Riscaldatori di spazio

Tipo: Manuale utente

HG995440XB EN User manual 2

IT Istruzioni per l’uso 16

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

1. SAFETY INFORMATION

Before the installation and use of the appliance, careful-

ly read the supplied instructions. The manufacturer is

not responsible if an incorrect installation and use cau-

ses injuries and damages. Always keep the instructions

with the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they are supervised by an adult or a

person who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance

when it operates or when it cools down. Accessible

parts are hot.

• If the appliance has a child safety device, we recom-

mend that you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

• The appliance and its accessible parts become hot

during use. Do not touch the heating elements.

• Do not operate the appliance by means of an exter-

nal timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

ENGLISH 3

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a

fire blanket.

• Do not store items on the cooking surfaces.

• Do not use a steam cleaner to clean the appliance.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• If the glass ceramic surface is cracked, switch off the

appliance to avoid the possibility of electric shock.

SAFETY INSTRUCTIONS

This appliance is suitable for the

following markets: IT

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This pre-

vents hot cookware to fall from the ap-

pliance when the door or the window

is opened.

• If the appliance is installed above

drawers make sure that the space, be-

tween the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. We recommend to install a non-

combustile separation panel under the

appliance to prevent access to the

bottom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is dis-

connected from the power supply.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-

pliance or hot cookware, when you

connect the appliance to the near

sockets

• Make sure the appliance is installed

correctly. Loose and incorrect electrici-

ty mains cable or plug (if applicable)

can make the terminal become too

hot.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on cable.

www.aeg.com

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact the Service or an

electrician to change a damaged

mains cable.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at

all poles. The isolation device must

have a contact opening width of mini-

mum 3 mm.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the ad-

justment of the appliance are compat-

ible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

• This appliance is not connected to a

device, which evacuates the products

of combustion. Make sure to connect

the appliance according to current in-

stallation regulations. Pay attention to

requirements regarding adequate

ventilation.

2.2 Use

WARNING!

Risk of injury, burns or electric

shock.

• Remove all the packaging, labelling

and protective film (if applicable) be-

fore first use.

• Use this appliance in a household en-

vironment.

• Do not change the specification of this

appliance.

• Do not let the appliance stay unatten-

ded during operation.

• Do not operate the appliance with wet

hands or when it has contact with wa-

ter.

• Do not put cutlery or saucepan lids on

the cooking zones. They become hot.

• Set the cooking zone to “off” after

use.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire or explosion.

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food rem-

nants, can cause fire at a lower tem-

perature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the con-

trol panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cook-

ware fall on the appliance. The surface

can be damaged.

• Do not activate the cooking zones

with empty cookware or without cook-

ware.

• Do not put aluminium foil on the ap-

pliance.

• Cookware made of cast iron, alumini-

um or with a damaged bottom can

cause scratches on the glass or glass

ceramic. Always lift these objects up

when you have to move them on the

cooking surface.

• This appliance is for cooking purposes

only. Do not use the appliance for oth-

er purposes, as for example room

heating.

ENGLISH 5

• The use of a gas cooking appliance re-

sults in the production of heat and

moisture. Provide good ventilation in

the room where the appliance is instal-

led.

• Make sure that the ventilation open-

ings are not blocked.

• Prolonged intensive use of the appli-

ance may call for additional ventila-

tion, for example opening of a win-

dow, or more effective ventilation, for

example increasing the level of me-

chanical ventilation where present.

• Use only stable cookware with the cor-

rect shape and diameter larger than

the dimensions of the burners. There

is a risk of overheating and rupture of

the glass plate (if applicable).

• Make sure the flame does not go out

when you quickly turn the knob from

the maximum to the minimum posi-

tion.

• Make sure pots are centrally posi-

tioned on the rings and do not stick

out over edges of the cooking surface.

• Use only the accessories supplied with

the appliance.

• Do not install a flame diffuser on the

burner.

2.3 Care and Cleaning

WARNING!

Risk of damage to the appliance.

• Clean regularly the appliance to pre-

vent the deterioration of the surface

material.

• Do not use water spray and steam to

clean the appliance.

• Do not clean the burners in the dish-

washer.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal ob-

jects.

2.4 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the ap-

pliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

1 2 3 4 5

Semi-rapid burner

Auxiliary burner

Triple Crown burner

Semi-rapid burner

Control knobs

www.aeg.com

3.2 Control knobs

Symbol Description

no gas supply / off po-

sition

ignition position /

maximum gas supply

Symbol Description

minimum gas supply

4. DAILY USE

WARNING!

Refer to the Safety chapters.

4.1 Ignition of the burner

WARNING!

Be very careful when you use

open fire in kitchen environment.

Manufacturer decline any re-

sponsibility in case of misuse of

the flame

Always light the burner before

you put cookware.

Lightning the burner:

Push the control knob down and

turn it counterclockwise to the maxi-

mum position (

Keep the control knob pushed for

equal or less than 10 seconds to let

the thermocouple warm up. If not,

the gas supply will be interrupted.

Adjust the flame after it is regular.

If the burner does not light after

some tries, check if the crown

and its cap are in correct posi-

tions.

Each control knob has a pilot

light. It lights up when you turn

the control knob.

Burner cap and crown

Thermocouple

Ignition candle

Burner cap

Burner crown

Ignition candle

Thermocouple

ENGLISH 7

WARNING!

Do not keep the control knob

pushed for more than 15 sec-

onds.

If the burner does not light after

15 seconds, release the control

knob, turn it into off position and

try to light the burner again after

minimum 1 minute.

In the absence of electricity you

can ignite the burner without

electrical device; in this case ap-

proach the burner with a flame,

push the relevant knob down

and turn it counter-clockwise to

maximum gas release position.

If the burner accidentally goes

out, turn the control knob to the

off position and try to light the

burner again after minimum 1 mi-

nute.

The spark generator can start au-

tomatically when you switch on

the mains, after installation or a

power cut. It is normal.

4.2 Turning the burner off

To put the flame out, turn the knob to

the symbol

WARNING!

Always turn the flame down or

switch it off before you remove

the pans from the burner.

5. HELPFUL HINTS AND TIPS

WARNING!

Refer to the Safety chapters.

5.1 Energy savings

• If possible, always put the lids on the

pans.

• When the liquid starts to boil, turn

down the flame to barely simmer the

liquid.

WARNING!

Use cookware with diameters ap-

plicable to the size of burners.

Burner Diameters

of cookware

Triple Crown 180 - 260 mm

Semi-rapid (rear left) 120 - 240 mm

Semi-rapid (rear

right)

120 - 240 mm

Semi-rapid (front

right)

120 - 220 mm

Auxiliary 80 - 180 mm

WARNING!

Do not use cast iron pans, pot-

stones, grill or toaster plates on

gas burners.

WARNING!

Make sure that the bottoms of

pots do not stand above the con-

trol knobs. If the control knobs

are under the bottoms of pots,

the flame heats them up.

Do not put the same pan on two

burners.

WARNING!

Make sure that pot handles is not

above the front edge of the

cooktop. Make sure that pots are

centrally put on the rings in order

to get maximum stability and to

get lower gas consumption.

www.aeg.com

Do not put unstable or damaged pots

on the rings to prevent from spill and in-

jury.

WARNING!

Do not use a flame diffuser.

WARNING!

Liquids spilt during cooking can

cause the glass to break

6. CARE AND CLEANING

WARNING!

Refer to the Safety chapters.

WARNING!

Deactivate the appliance and let

it cool down before you clean it.

Disconnect the appliance from

the electrical supply before you

do cleaning or maintenance

work.

Scratches or dark stains on the

surface have no effect on how

the appliance operates.

• You can remove the pan supports to

easily clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before

you put them back.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

•The pan supports are not dishwasher

proof. They must be washed by hand.

• The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

• Make sure you position the pan sup-

ports correctly after cleaning.

• To make the burners work correctly,

make sure that the arms of the pan

supports are in the centre of the burn-

er.

• Be very careful when you replace

the pan supports to prevent the hob

top from damage.

After cleaning, dry the appliance with a

soft cloth.

Removing the dirt:

– Remove immediately: melting

plastic, plastic foil, and food con-

taining sugar.

– Stop the appliance and let it

cool down before you clean: lime-

scale rings, water rings, fat stains,

shiny metallic discolorations. Use a

special cleaner applicable for sur-

face of hob.

Clean the appliance with a damp

cloth and some detergent.

At the end rub the appliance dry

with a clean cloth.

WARNING!

Do not use knives, scrapers or

similar instruments to clean the

surface of the glass or between

the rims of the burners and the

frame (if applicable).

WARNING!

Do not slide cookware over the

glass because it could scratch

the surface. Also, do not let hard

or sharp objects fall onto the

glass or hit the edge of the hob.

6.1 Cleaning of the spark plug

This feature is obtained through a ce-

ramic ignition candle with a metal elec-

trode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.2 Periodic maintenance

Periodically speak your local Service

Force Centre to check the conditions of

the gas supply pipe and the pressure ad-

juster, if fitted.

ENGLISH 9

7. TROUBLESHOOTING

Problem Possible cause Remedy

There is no spark when

lighting the gas

• There is no electrical

supply

• Make sure that the

unit is connected and

the electrical supply is

switched on.

• Control the fuse. If the

fuse is released more

than one time, refer to

a qualified electrician.

•Burner cap and crown

are placed uneven

• Make sure that the

burner cap and crown

are in correct posi-

tions.

The flame is blow out im-

mediately after ignition

• Thermocouple is not

heated sufficient

• After lightning the

flame, keep the knob

pushed for equal or

less than 10 seconds.

The gas ring burns un-

evenly

• Burner crown is

blocked with food resi-

dues

• Make sure that the in-

jector is not blocked

and the burner crown

is clear of food parti-

cles.

If there is a fault, first try to find a solu-

tion to the problem yourself. If you can-

not find a solution to the problem your-

self, speak your dealer or the local Serv-

ice Force Centre.

If you operated the appliance in-

correctly, or the installation was

not carried out by a registered

engineer, the visit from the cus-

tomer service technician or deal-

er may not take place free of

charge, even during the warranty

period.

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They

are available at Service Force Centre and

approved spare parts shops.

7.1 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

www.aeg.com

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MODELMODEL

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

230V-50Hz

IP20

0049

A B C

Stick it on Guarantee Card and send

this part (if applicable)

Stick it on Guarantee Card and keep

this part (if applicable)

Stick it on instruction booklet

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

WARNING!

The following instructions about

installation, connection and

maintenance must be carried out

by qualified personnel in compli-

ance with standards and local

regulations in force.

8.1 Gas Connection

Choose fixed connections or use a flexi-

ble pipe in stainless steel in compliance

with the regulation in force. If you use

flexible metallic pipes, be careful they

do not come in touch with mobile parts

or they are not squeezed. Also be care-

ful when the hob is put together with an

oven.

Make sure that the gas supply

pressure of the appliance obeys

the recommended values. The

adjustable connection is fixed to

the comprehensive ramp by

means of a threaded nut G 1/2".

Screw the parts without force,

adjust the connection in the nec-

essary direction and tighten ev-

erything.

ABC

End of shaft with nut

Washer

Elbow

ENGLISH 11

Liquid gas

Use the rubber pipe holder for liquid

gas. Always engage the gasket. Then

continue with the gas connection.

The flexible pipe is prepared for apply

when:

– it can not get hot more than room

temperature, higher than 30°C;

– it is no longer than 1500 mm;

– it shows no throttles;

– it is not subject to traction or torsion;

– it does not get in touch with cutting

edges or corners;

– it can be easily examined in order to

make sure its condition.

The control of preservation of the flexi-

ble pipe consists in checking that:

– it does not show cracks, cuts, marks of

burnings on the two ends and on its

full length;

– the material is not hardened, but

shows its correct elasticity;

– the fastening clamps are not rusted;

– expired term is not due.

If one or more defects are visible, do not

repair the pipe, but replace it.

When installation is complete,

make sure that the seal of each

pipe fitting is correct. Use a

soapy solution, not a flame!

8.2 Injectors replacement

Remove the pan supports.

Remove the caps and crowns of the

burner.

With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the

type of gas you use (see table in

"Technical Information" chapter).

Assemble the parts, follow the same

procedure backwards.

Replace the rating plate (it is near

the gas supply pipe) with the one for

the new type of gas supply. You can

find this plate in the package sup-

plied with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure ad-

juster on the gas supply pipe.

8.3 Adjustment of minimum

level

To adjust the minimum level of the burn-

ers:

Light the burner.

Turn the knob on the minimum posi-

tion.

Remove the knob.

With a thin screwdriver, adjust the

by-pass screw position.

The by-pass screw

• If you change from natural gas G20 20

mbar to liquid gas, fully tighten the

by-pass screw in.

• If you change from liquid gas to natu-

ral gas G20 20 mbar, undo the by-pass

screw approximately 1/4 of a turn (1/2

of a turn for Triple Crown burner).

WARNING!

Make sure the flame does not go

out when you quickly turn the

knob from the maximum position

to the minimum position.

8.4 Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate

agree with the voltage and the power

of the local power supply.

• This appliance is supplied with a mains

cable. It has to be supplied with a cor-

rect plug which can hold the load that

the rating plate rates. Make sure that

you install the plug in a correct socket.

• Always use a correctly installed shock-

proof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

www.aeg.com

• There is a risk of fire when the appli-

ance is in connection with an exten-

sion cable, an adapter or a multiple

connection. Make sure that the

ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

Make sure that you connect the blue

neutral cable to the terminal with a letter

"N" on it. Connect the brown (or black)

phase cable to the terminal which has a

letter "L". Keep the phase cable connec-

ted at all times.

8.5 Replacement of the

connection cable

To replace the connection cable use on-

ly H05V2V2-F T90 or equivalent type.

Make sure that the cable section is appli-

cable to the voltage and the working

temperature. The yellow/green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

8.6 Building In

min. 45 mm

min. 650 mm

880 mm

min. 450 mm

40 mm

490 mm

A - supplied brackets

CAUTION!

Install the appliance only on a

worktop with flat surface.

8.7 Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must

be easy to remove and let an easy ac-

cess in case a technical assistance inter-

vention is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

Removable panel

Space for connections

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

ENGLISH 13

9. TECHNICAL INFORMATION

Hob dimensions

Width: 896 mm

Length: 516 mm

Hob recess dimensions

Width: 880 (0 / +2) mm

Length: 490 (0 / +2) mm

Heat input

Triple Crown burner: 3.8 kW

Semi-Rapid burner: 1.9 kW

Auxiliary burner: 1.0 kW

TOTAL POWER: G20 (2H) 20 mbar = 10.5 kW

G30 (3+) 28–30 mbar = 763 g/h

G31 (3+) 37 mbar = 750 g/h

Electric supply: 230 V ~ 50 Hz

Category: II2H3+

Gas connection: G 1/2

Gas supply: G20 (2H) 20 mbar

Appliance class: 3

By-pass diameters

Burner Ø By-pass in

1/100 mm

Burner Ø By-pass in

1/100 mm

Auxiliary 28 Triple Crown 56

Semi-rapid 32

Gas burners for NATURAL GAS G20 20 mbar

BURNER NORMAL POWER kW inj. 1/100 mm

Auxiliary 1.0 70

Semi-rapid 1.9 96

Triple Crown 3.8 146

Gas burners for LPG (Butane / Propane) G30/G31 28-30/37 mbar

BURNER

NORMAL

POWER

inj. 1/100

G30

28-30

mbar

G31

37 mbar

g/h g/h

Auxiliary 1.0 50 73 71

Semi-rapid 1.9 71 138 136

Triple Crown 3.8 98 276 271

www.aeg.com

10. ENVIRONMENT CONCERNS

Recycle the materials with the

symbol

. Put the packaging in

applicable containers to recycle it.

Help protect the environment and

human health and to recycle waste

of electrical and electronic

appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling

facility or contact your municipal

office.

ENGLISH 15

INDICE

1. INFORMAZIONI PER LA SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3. DESCRIZIONE DEL PRODOTTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4. UTILIZZO QUOTIDIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5. CONSIGLI E SUGGERIMENTI UTILI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6. PULIZIA E CURA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7. RISOLUZIONE DEI PROBLEMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8. INSTALLAZIONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

9. DATI TECNICI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PER RISULTATI PERFETTI

Grazie per aver scelto di acquistare questo prodotto AEG. Lo abbiamo creato per fornirvi

prestazioni impeccabili per molti anni, grazie a tecnologie innovative che vi semplificheranno

la vita - funzioni che non troverete sui normali elettrodomestici. Vi invitiamo di dedicare

qualche minuto alla lettura per sapere come trarre il massimo dal vostro elettrodomestico.

Visitate il nostro sito web per:

ricevere consigli, scaricare i nostri opuscoli, eliminare eventuali anomalie, ottenere

informazioni sull'assistenza.

www.aeg.com

registrare il vostro prodotto e ricevere un servizio migliore:

www.aeg.com/productregistration

acquistare accessori, materiali di consumo e ricambi originali per la vostra

apparecchiatura:

www.aeg.com/shop

SERVIZIO CLIENTI E MANUTENZIONE

Consigliamo sempre l’impiego di ricambi originali.

Quando si contatta l'Assistenza, accertarsi di disporre dei seguenti dati.

Le informazioni si trovano sulla targhetta di identificazione. Modello, numero dell'apparecchio

(PNC), numero di serie.

Avvertenza / Attenzione - Importanti Informazioni di Sicurezza

Informazioni e consigli generali

Informazioni in materia di sicurezza ambientale

Con riserva di modifiche.

www.aeg.com

1. INFORMAZIONI PER LA SICUREZZA

Leggere attentamente le istruzioni fornite prima di in-

stallare e utilizzare l'apparecchiatura. Il produttore non

è responsabile se un'installazione ed un uso non corret-

to dell'apparecchiatura provocano lesioni e danni. Te-

nere sempre le istruzioni a portata di mano in caso di

necessità durante l'utilizzo.

1.1 Sicurezza dei bambini e delle persone

vulnerabili

AVVERTENZA!

Rischio di soffocamento, lesioni o invalidità perma-

nente.

• Questa apparecchiatura può essere usata da bambini

a partire dagli 8 anni e da adulti con limitate capacità

fisiche, sensoriali o mentali o con scarsa esperienza o

conoscenza sull'uso dell'apparecchiatura, se sorve-

gliati o se sono stati istruiti relativamente all'uso del-

l'apparecchiatura e hanno capito i rischi coinvolti.

• Non consentire ai bambini di giocare con l'apparec-

chiatura.

• Tenere i materiali di imballaggio al di fuori della por-

tata dei bambini.

• Tenere i bambini e gli animali domestici lontano dal-

l'apparecchiatura durante il funzionamento o raffred-

damento. Le parti accessibili sono incandescenti.

• Se l’apparecchiatura dispone di un dispositivo di sicu-

rezza per i bambini, consigliamo di attivarlo.

• La pulizia e gli interventi di manutenzione non devo-

no essere eseguiti dai bambini senza supervisione.

1.2 Avvertenze di sicurezza generali

• L'apparecchiatura e le parti accessibili si riscaldano

molto durante l'uso Non toccare le resistenze.

ITALIANO 17

• Non utilizzare un timer esterno o un sistema di con-

trollo remoto distinto per mettere in funzione l'appa-

recchiatura.

• Non lasciare mai il piano di cottura incustodito duran-

te la preparazione di cibi in quanto olio e grassi po-

trebbero provocare un incendio.

• Non tentare mai di spegnere un incendio con dell'ac-

qua; spegnere l'apparecchiatura e coprire le fiamme

ad es. con un coperchio o una coperta di protezione

dal fuoco.

• Non conservare nulla sulle superfici di cottura.

• Non usare dispositivi per la pulizia a vapore per pulire

l'apparecchiatura.

• Oggetti metallici quali coltelli, forchette, cucchiai e

coperchi non dovrebbero essere posti sulla superficie

del piano di cottura in quanto possono diventare cal-

di.

• Se la superficie di vetroceramica presenta delle cre-

pe, spegnere l'apparecchiatura per evitare il rischio di

scossa elettrica.

ISTRUZIONI DI SICUREZZA

Questa apparecchiatura è adatta ai

seguenti mercati: IT

2.1 Installazione

AVVERTENZA!

L’installazione dell'apparecchia-

tura deve essere eseguita da per-

sonale qualificato.

• Rimuovere tutti i materiali di imballag-

gio.

• Non installare o utilizzare l'apparec-

chiatura se è danneggiata.

• Attenersi alle istruzioni fornite insieme

all'apparecchiatura.

• È necessario rispettare la distanza mi-

nima dalle altre apparecchiature.

• Fare sempre attenzione quando si

sposta l'apparecchiatura, perché è pe-

sante. Indossare sempre guanti di si-

curezza.

• Proteggere le superfici di taglio con

un materiale di tenuta per evitare che

l'umidità causi dei rigonfiamenti.

• Proteggere la base dell'apparecchia-

tura da vapore e umidità.

• Non installare l'apparecchiatura ac-

canto ad una porta o sotto una fine-

stra, per evitare che pentole calde ca-

dano dall'apparecchiatura quando la

porta o la finestra sono aperte.

• Se l'apparecchiatura viene installata

sopra dei cassetti, assicurarsi che lo

spazio, tra la base dell'apparecchiatu-

www.aeg.com

ra e il cassetto superiore, sia sufficien-

te per il ricircolo d'aria.

• La base dell'apparecchiatura può sur-

riscaldarsi. Si consiglia di prevedere un

pannello divisorio in materiale non in-

fiammabile al di sotto dell'apparec-

chiatura per rendere inaccessibile la

base.

Collegamento elettrico

AVVERTENZA!

Rischio di incendio e scossa elet-

trica.

• Tutti i collegamenti elettrici devono

essere eseguiti da un elettricista quali-

ficato.

• L'apparecchiatura deve disporre di

una messa a terra.

• Prima di qualsiasi intervento, è neces-

sario verificare che l'apparecchiatura

sia disinserita dalla rete elettrica.

• Utilizzare il cavo di alimentazione ap-

propriato.

• Evitare che i collegamenti elettrici si

aggroviglino.

• Assicurarsi che il cavo di alimentazione

o la spina (ove prevista) non sfiori l'ap-

parecchiatura calda o pentole calde

quando si collega l'apparecchiatura al-

le prese vicine

• Verificare che l'apparecchiatura sia in-

stallata correttamente. Un collega-

mento elettrico o una spia lenti (ove

previsti) potrebbe far diventare il ter-

minale incandescente.

• Assicurarsi che la protezione da scosse

elettriche sia installata.

• Utilizzare il morsetto fermacavo sul ca-

vo.

• Accertarsi di non danneggiare la spina

e il cavo (ove previsti). Contattare il

Centro di Assistenza o un elettricista

qualificato per sostituire un cavo dan-

neggiato.

• L'impianto elettrico deve essere dota-

to di un dispositivo di isolamento che

consenta di scollegare l'apparecchia-

tura dalla presa di corrente a tutti i po-

li. Il dispositivo di isolamento deve

avere una larghezza dell'apertura di

contatto non inferiore ai 3 mm.

• Servirsi unicamente di dispositivi di

isolamento adeguati: interruttori auto-

matici, fusibili (quelli a tappo devono

essere rimossi dal portafusibile), sgan-

ciatori per correnti di guasto a terra e

relè.

Collegamento gas

• Tutti i collegamenti del gas devono

essere eseguiti da una persona qualifi-

cata.

• Prima di procedere con l’installazione,

verificare che le condizioni di distribu-

zione locale (pressione e tipo di gas) e

i valori preimpostati dell’apparecchia-

tura siano compatibili.

• Adottare le misure necessarie per ga-

rantire una corretta circolazione d'aria

intorno all'apparecchiatura.

• Le informazioni relative all'alimenta-

zione del gas si trovano sulla targhetta

dei dati.

• La presente apparecchiatura non è

collegata a un dispositivo per l’eva-

cuazione dei residui di combustione.

Assicurarsi di collegare l'apparecchia-

tura conformemente alle disposizioni

vigenti sull'installazione. Fare attenzio-

ne ai requisiti relativi ad un'adeguata

ventilazione.

2.2 Utilizzo

AVVERTENZA!

Rischio di lesioni, scottature o

scosse elettriche.

• Rimuovere tutti i materiali di imballag-

gio, le etichette e la pellicola protetti-

va (ove presente) prima del primo uti-

lizzo.

• Utilizzare l’apparecchiatura in un am-

biente domestico.

• Non apportare modifiche alle specifi-

che di questa apparecchiatura.

• Non lasciare mai l'apparecchiatura in-

custodita durante il funzionamento.

• Non mettere in funzione l'apparec-

chiatura con le mani umide o quando

c'è un contatto con l'acqua.

• Non appoggiare posate o coperchi

sulle zone di cottura. Possono diventa-

re roventi.

• Spegnere la zona di cottura dopo ogni

utilizzo.

ITALIANO 19

• Non utilizzare l'apparecchiatura come

superficie di lavoro o come piano di

appoggio.

• Se la superficie dell'apparecchiatura

presenta delle incrinature, scollegare

immediatamente l'apparecchiatura

dall'alimentazione per evitare scosse

elettriche.

• Un alimento immerso nell'olio molto

caldo può provocare degli schizzi.

AVVERTENZA!

Si può verificare un'esplosione o

un incendio.

• Grassi e olio caldi possono rilasciare

vapori infiammabili. Mantenere fiam-

me o oggetti caldi lontani da grassi e

olio quando li si utilizza per cucinare.

• I vapori rilasciati da un olio molto cal-

do possono provocare una combu-

stione spontanea.

• L'olio usato, che può contenere resi-

dui di cibo, può liberare delle fiamme

ad una temperatura inferiore rispetto

ad un olio utilizzato per la prima volta.

• Non appoggiare o tenere liquidi o

materiali infiammabili, né oggetti facil-

mente incendiabili sull'apparecchiatu-

ra, al suo interno o nelle immediate vi-

cinanze.

AVVERTENZA!

Vi è il rischio di danneggiare l'ap-

parecchiatura.

• Non poggiare pentole calde sul pan-

nello dei comandi.

• Non esporre al calore pentole vuote.

• Fare attenzione a non lasciar cadere

oggetti o pentole sull'apparecchiatu-

ra. La superficie si potrebbe danneg-

giare.

• Non mettere in funzione le zone di

cottura in assenza di pentole o con

pentole vuote.

• Non appoggiare la pellicola di allumi-

nio direttamente sull'apparecchiatura.

• Lo spostamento di pentole in ghisa, in

alluminio o con fondi danneggiati può

graffiare il vetro o la vetroceramica.

Per spostare questi oggetti sollevarli

sempre dalla superficie di cottura.

• L'apparecchiatura è destinata solo alla

cottura. Non utilizzare l'apparecchiatu-

ra per altri scopi come per esempio il

riscaldamento di un ambiente.

• Un'apparecchiatura per cottura a gas

produce calore e umidità. Provvedere

ad un'adeguata ventilazione nell'am-

biente in cui si trova l'apparecchiatura.

• Assicurarsi che le aperture di ventila-

zione non siano ostruite.

• Se si prevede un impiego prolungato

e intenso dell’apparecchiatura, può

essere necessaria un’ulteriore fonte di

aerazione, per esempio l’apertura di

una finestra o un sistema più efficace,

come l’aumento del livello di ventila-

zione meccanica, ove presente.

• Utilizzare solo pentole stabili, di forma

corretta e con un diametro superiore

alle dimensioni dei bruciatori. La lastra

di vetro (ove presente) può surriscal-

darsi e rompersi.

• Accertarsi che la fiamma non si spen-

ga quando si gira rapidamente la ma-

nopola dalla posizione massima a

quella minima.

• Accertarsi che le pentole si trovino al

centro degli anelli e non tocchino i

bordi della superficie di cottura.

• Usare esclusivamente gli accessori in

dotazione all'apparecchiatura.

• Non utilizzare un diffusore di fiamma

sul bruciatore.

2.3 Pulizia e manutenzione

AVVERTENZA!

Vi è il rischio di danneggiare l'ap-

parecchiatura.

• Pulire regolarmente l'apparecchiatura

per evitare il deterioramento dei ma-

teriali che compongono la superficie.

• Non nebulizzare acqua né utilizzare

vapore per pulire l'apparecchiatura.

• Non pulire i bruciatori in lavastoviglie.

• Pulire l'apparecchiatura con un panno

inumidito e morbido. Utilizzare solo

detergenti neutri. Non usare prodotti

abrasivi, spugnette abrasive, solventi o

oggetti metallici.

2.4 Smaltimento

AVVERTENZA!

Rischio di lesioni o soffocamento.

www.aeg.com

La pagina si sta caricando...

Aeg-Electrolux HG995440XB Manuale utente

Marca: Aeg-Electrolux

Modello: HG995440XB

Categoria: Riscaldatori di spazio

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Aeg-Electrolux HG995440XB User manual

Aeg-Electrolux HG995440XB Manuale utente

Aeg-Electrolux HG995440XB Manuale utente

in altre lingue

Documenti correlati

Altri documenti