Sanyo NV-E7000 - Portable GPS And Mobile DVD Entertainment System Istruzioni per l'uso

Categoria
Navigatori
Tipo
Istruzioni per l'uso
INSTALLATION AND
OPERATION MANUAL
Portable DVD Navigation System
Part No.:
NV-E7000
We would like to take this opportunity to sincerely thank you for purchasing
this product.
¡Read this manual and the warranty certificate carefully prior to using the unit. After
having completely read this manual, store it in a safe place for easy reference.
¡Make sure to read the “Safety precautions” and “Cautionary items for proper usage”
appearing within this manual.
21
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo
Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names
and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
This warranty is valid only on SANYO products purchased and used in the united states of america,
excluding all U.S. Territories and protectorates. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL
RETAIL USER, AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL
OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE
SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS
REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants
this SANYO product against defects in materials and workmanship for the periods specified below. SFC will
repair or replace (at its option) the product and any of its parts which fail to conform to this warranty. The
warranty period commences on the date the product was first purchased at retail.
For product operation, authorized service center referral, service assistance or problem resolution, call
CUSTOMER INFORMATION 1-800-421-5013
Weekdays 8:00 AM - 5:00 PM Pacific Time
For accessories and/or parts not available from an authorized dealer, call
PARTS ORDER INFORMATION 1-800-726-9662
Weekdays 8:00 AM - 5:00 PM Pacific Time
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the
appropriate model’s instruction manual, or (B) the repair of any product whose serial number has been
altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, knobs or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation
of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of
SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized
service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit
accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage,
fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to
assume for it any other obligation or liability.
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY.
IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PERFORMANCE
OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE.
For your protection in the event of theft or loss of this product, please fill in the information below for your own
personal records.
Model No. Serial No.
(Located on back or bottom side of unit)
Date of Purchase Purchase Price
Where Purchased
SANYO MOBILE AUDIO
MODEL NV-E7000 LIMITED WARRANTY
LABOR
1 YEAR
PARTS
1 YEAR
WARRANTY APPLICATION
New, unused Sanyo Audio/Video products
purchased through a Sanyo authorized dealer
in Canada are warranted against manufacturing
defects in materials and workmanship for ONE
YEAR from the date of purchase by the original
retail purchaser.
This warranty only applies in favor of the
original retail purchaser of the warranted
product.
SANYO CANADA INC.’S
RESPONSIBILITY
During the warranty period, SANYO Canada
Inc. will repair, or at our option, replace an
Audio/Video product which shows evidence of a
manufacturing defect in materials or
workmanship. Replacement PARTS are
warranted for the remaining portion of the
warranty period.
WHAT IS NOT COVERED
(a) Products purchased outside Canada.
(b) Products purchased in a used condition.
(c) Problems due to product set-up and
installation.
(d) Adjustments that are outlined in the
Operating Manual.
(e) Accessory items including antenna,
batteries, cassette tapes, cables, etc.
(f) Damage in or due to transportation.
(g) Damage due to improper maintenance,
improper wiring, accident, abuse, misuse or
negligence.
(h) Damage caused by lightning and power
surges.
ORIGINAL RETAIL PURCHASER’S
RESPONSIBILITY
You, the original retail purchaser, must present
your original, dated bill-of-sale together with this
warranty to SANYO Canada Inc. or to an
authorized Sanyo Service Depot when you
make a claim under this Warranty.
You, the original retail purchaser, are
responsible for any costs of TRANSPORTING
the product to and from SANYO Canada Inc. or
an authorized Sanyo Service Depot. You also
are responsible for the cost of any
MAINTENANCE necessary in respect of the
product.
WARRANTY BECOMES VOID
This warranty becomes void if the product’s
serial numbers are altered or removed or if any
repair to the product is made other than by
SANYO Canada Inc. or by an authorized Sanyo
Service Depot.
LIMITATIONS
(a) SANYO Canada Inc. reserves the right to
change or improve the design of the model
of the product warranted hereunder without
incurring any obligation to make any
modifications to or to install any
improvement in or on the product.
(b) In no event shall SANYO Canada Inc. or
any of its Authorized Dealers be liable for
special or consequential damage arising
from the use of this product.
STATUTORY WARRANTIES
The above provisions do not preclude the
operation of any applicable provincial statute
which in certain circumstances may not allow
some of the limitations and exclusions
described in this Warranty. Where any terms of
this Warranty are prohibited by such a statute,
they shall be deemed null and void but the
remainder of this warranty shall remain in
effect.
HOW TO OBTAIN WARRANTY
SERVICE
Please contact the Sanyo Authorized Dealer
from whom the product was purchased, or
contact us directly at:
SANYO Canada Inc.
1-300 Applewood Cres.
Concord, Ont. L4K 5C7
(905) 760-9944
1-800-263-2244
http://www.sanyocanada.com
THE SANYO COMFORT WARRANTY
AUDIO/VIDEO PRODUCTS
(R12)
43
CONTENTS (1)
WARRANTY ........................................................................................................1
CONTENTS .........................................................................................................3
TIPS ON HOW TO READ THIS MANUAL...........................................................7
INSTALLATION MANUAL ...................................................................................9
HOW TO INSTALL THE UNIT ...........................................................................11
GPS EXTERIOR ANTENNA INSTALLATION METHOD ..................................14
INTRODUCTION ...............................................................................................18
SAFETY PRECAUTIONS ..................................................................................19
CAUTIONARY ITEMS FOR PROPER USAGE .................................................24
MAIN FEATURES..............................................................................................28
ABOUT DISCS...................................................................................................31
WHAT IS A NAVIGATION SYSTEM..................................................................34
ABOUT THE GPS EXTERIOR ANTENNA ........................................................36
COMPONENT NAMES AND FUNCTIONS (1)..................................................37
CHARACTER INPUT USING THE 10-KEY ON THE REMOTE CONTROL .....45
HOW TO HANDLE THE REMOTE CONTROL .................................................47
ABOUT THE POWER SOURCE .......................................................................50
INSERTING/REMOVING A DISC......................................................................52
NAVI OPERATION ............................................................................................54
DISPLAYING THE MAP SCREEN ...................................................................55
HOW TO VIEW THE MAP SCREEN .................................................................57
CHANGING THE MAP DISPLAY ......................................................................59
QUICK ROUTE SEARCH ..................................................................................66
BASIC MENU OPERATIONS ............................................................................68
LIST OF MENU ITEMS......................................................................................69
ABOUT THE QUICK MENU ..............................................................................70
SEARCHING FOR A GEOGRAPHICAL POINT................................................71
POINTS OF INTEREST CATEGORIES ............................................................82
REGISTERING YOUR HOME ...........................................................................84
ABOUT SETTING ROUTES .............................................................................85
SINGLE-ROUTE/MULTI-ROUTE SEARCH ......................................................89
MODIFYING A ROUTE......................................................................................96
DISPLAYING THE PRESENT ROUTE..............................................................99
STORING/DELETING THE PRESENT ROUTE..............................................100
VIEWING ROAD INFORMATION WITH THE PRESENT ROUTE..................102
SEARCHING FOR A WAY HOME...................................................................103
STOPPING/STARTING ROUTE GUIDANCE..................................................104
MODIFYING ROUTE CONDITIONS ...............................................................105
STRAYING OFF THE ROUTE (REROUTE)....................................................107
THE ROAD AHEAD CANNOT BE TAKEN (DETOUR SEARCH) ...................108
SAVED ROUTES LIST ....................................................................................109
ROUTE SIMULATION .....................................................................................112
CHANGING THE MAIN SCREEN SETTINGS ................................................113
SETTING THE 2-SCREEN DISPLAY..............................................................115
CHANGING THE ROUTE GUIDANCE SCREEN SETTINGS.........................118
INDICATING THE STREET NAME .................................................................122
CHANGING THE UNIT OF DISTANCE, THE COLOR OF
THE MAP AND THE PRESENT LOCATION MARK .......................................123
DISABLING THE REGISTERED POINT MARK DISPLAY..............................124
DISPLAYING LATITUDINAL AND LONGITUDINAL COORDINATES............125
CLOCK SETTING ............................................................................................126
USING TRACKS ..............................................................................................127
MODIFYING THE PRESENT LOCATION MARK LOCATION
AND BEARING ................................................................................................131
EDITING/VIEWING REGISTERED POINTS ...................................................133
RETRIEVING REGISTERED POINT MAPS ...................................................136
DELETING REGISTERED POINTS ................................................................137
VIEWING GPS INFORMATION.......................................................................138
VERIFYING UNIT CONNECTION ...................................................................139
65
CONTENTS (2)
DVD/CD/JPEG IMAGING OPERATION .........................................................140
TO START PLAYBACK ...................................................................................141
VARIOUS PLAYBACK FUNCTIONS...............................................................143
HOW TO USE THE TITLE MENU ...................................................................145
HOW TO USE THE DVD MENU .....................................................................146
PLAYBACK FROM THE DESIRED POSITION ..............................................147
SWITCHING THE AUDIO LANGUAGE...........................................................149
SWITCHING THE SUBTITLE LANGUAGE .....................................................150
CHANGING THE ANGLE ................................................................................151
ENLARGING THE SCREEN............................................................................152
SWITCHING THE AUDIO................................................................................153
SHUFFLED PLAYBACK ..................................................................................154
PLAYING BACK TRACK INTROS...................................................................155
REPEAT PLAYBACK.......................................................................................156
SWITCHING THE TIME DISPLAY ..................................................................157
VIEWING JPEG IMAGES ................................................................................158
ENLARGING/REDUCING THE IMAGE DISPLAY...........................................160
CHANGING THE SLIDESHOW DISPLAY FORMAT ......................................161
SELECTING PLAY MODE...............................................................................162
ROTATING THE IMAGE..................................................................................163
CHANGING THE INITIAL SETTINGS .............................................................164
TERMINOLOGY ..............................................................................................174
OTHER ............................................................................................................176
CONNECTING A VIDEO DECK/VIDEO CAMERA..........................................177
HOW TO ADJUST THE IMAGE ......................................................................178
ABOUT THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION .........181
ABOUT THE BRIGHTNESS OF THE BUTTONS............................................181
MAIN SPECIFICATIONS .................................................................................182
RECEIVING SIGNALS FROM THE GPS SATELLITE ....................................183
CAUTIONARY ITEMS DURING ROUTE GUIDANCE.....................................185
ABOUT THE VOICE GUIDANCE ....................................................................189
ABOUT THE MAP DVD-ROM .........................................................................191
SETTING THE DEPARTURE/WAYPOINT/DESTINATION POINTS ..............193
ABOUT UPGRADES .......................................................................................195
TROUBLESHOOTING.....................................................................................197
WHEN THIS MESSAGE APPEARS... .............................................................204
NAVIGATION SYSTEM DEFAULT SETTINGS LIST ......................................205
7
TIPS ON HOW TO READ THIS MANUAL
This manual uses the following marks to call the user’s attention.
The meaning of each mark is provided below. Please make sure you
understand these prior to reading the manual.
Follow this advice to ensure proper functioning of your vehicle
and the unit.
Not doing so may result in damage to your vehicle or the unit
or result in a decreased level of performance.
Keep this hint in mind when using the unit.
It may be useful later on to help you operate it skillfully.
Indicates title names and page numbers for easy reference.
Displays the buttons on the remote control and on the unit itself.
Displays the menus (items) appearing on the screen.
CAUTIONARY ITEMS FOR PROPER USE
¡Operating the portable DVD navigation unit
• Avoid operating the unit while driving. First stop the vehicle and then proceed.
• While driving, keep your gaze on the unit’s screen to a bare minimum (under 1
second).
¡Installing the portable DVD navigation unit
• Install the unit on the upper part of the center panel in a way so as not to obstruct
your view of the road.
• Install it properly as per the instructions appearing in this manual.
(The unit is designed to render complex imaging such as videos impossible while
driving. Do not under any circumstance reconfigure the wiring or perform any
improper conversions to the unit.)
Hint
z
v
Advise
É
Moves the Joystick vertically and laterally and shows operation
in 8 different directions.
Describes operation results.
This symbol denotes that the operation procedures are divided
at the next step.
8
The meaning of the symbols ( , ) appearing in this manual are as
follows.
. . .
DVD video function
. . .
Music CD function
This unit utilizes the following 3 technologies to playback DVD videos:
Macrovision
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Dolby Digital
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DVD CD
DVD
CD
Route search
10
Please contact your place of purchase if you have any questions about installation
or connection.
ACCESSORIES
9
INSTALLATION MANUAL
Parking brake
connector cable
GPS Exterior Antenna and
Installation Parts
1 disc
1 core
Map DVD-ROM
Self-lock connector
AC/DC adapter
2 clips2 cables
12V cigarette lighter
connector cable
1 cable 1 cable
Remote control and
holder
Each 1
Velcro tape
1 pair
AAA battery
2 batterys
Tapping screw (M3x8)
2 screws
Kit for Installation
1 cable
RCA cord (when in
AUDIO mode)
1 cable
RCA cord (when in
VIDEO mode)
Core (Small)
Core (Large)
1 core
WARNING: This product contains chemicals, including lead, known to the State of
California to cause [cancer, and] birth defects or other reproductive harm.
Wash hands after handling.
1211
The initial adhesive strength of the double-surface adhesive tape is reduced when the
temperature is low (20°C (68°F) or less). Turn on the heater and heat the vehicle up
prior to adhering onto the mounting surface.
Make sure to use the cleaner included with the kit to clean the mounting
surface of any dirt and let the surface dry before adhering the stand base.
The dashboard may have been coated with a wax surface protective agent that
is hard to see with the naked eye. This wax significantly weakens the double-
surface adhesive tape and may cause the unit to fall.
The double-surface tape adhering the stand base can only be stuck onto the
surface once and cannot be peeled off and re-adhered.
1
Stand assembly
q Method using the portable DVD navigation unit mounting stay
There are two ways to assemble the stand: with or without the portable DVD navigation
unit mounting stay. Select the assembly method that best suits your vehicle.
¡The back/forth left/right angles and the vertical positioning are adjustable.
1. Push the lock release tab
and remove the one-touch
attachable shoe.
4. Mount the unit prepared as described in 3 onto the
stand base.
2. Loosen the screw, slide the
slider nut through the center
groove of the portable DVD
navigation unit mounting
stay and tighten the screw.
3. Install the portable DVD
navigation unit mounting
stay onto the unit.
¡Adjust the angle.
¡The back/forth left/right angles are adjustable.
1. Push the lock release tab
and remove the one-
touch attachable shoe.
2. Remove the slider nut from
the one-touch attachable
shoe.
3. Install the one-touch
attachable shoe onto the
unit.
4. Mount the unit prepared as described in 3 onto
the stand base.
¡Removing the portable DVD navigation unit
from the stand base
¡Adjust the vertical position
¡Adjust the angle.
¡Remove the unit from the stand base.
Disc replacement is impossible once the unit has been mounted onto the stay.
Replace the disc after removing the unit from the mounting stay.
CAUTION
HOW TO INSTALL THE UNIT (1)
PREPARATIONS PRIOR TO INSTALLATION
Press and
hold down
Angle setting screw
Pull out
Lock release tab
One-touch attachable shoe
Stand base
Loosen
Coin
Tighten
Slider nut
The rounded
part is vertical.
Portable DVD navigation
unit mounting stay
Tighten
Portable DVD
Navigation System
While pressing the
bottom of the unit,
apply the mounting
stay cushion onto the
back of the unit.
Applying excessive
force will cause the
disc insert slit cover to
warp which will make
it strike the disc.
CAUTION
Make the stand
perpendicular to
the base.
(see figure)
Slide the one-touch attachable
shoe down through the stand
base until you hear a snap.
Loosen the angle
setting screw and
adjust the back/forth
left/right angles.
After adjustment,
fasten the screw.
Press
and hold
down
Press the lock
release tab and
pull out the unit.
Remove the unit from the stand base and adjust
the position of the one-touch attachable shoe.
Pull out
Loosen
Tighten
After adjustment,
fasten the screw.
w How to mount directly onto the stand base
Loosen the angle
setting screw and
adjust the back/forth
left/right angles.
After adjustment,
fasten the screw.
Press and hold down
Pull out backwards
Pull the unit
backwards while
pressing the lock
release tab.
Slide the one-touch
attachable shoe down
through the stand base
until you hear a snap.
Tighten
Front
Front
Loosen
Slider nutPull out
Press and
hold down
Keep the removed slider nut in a safe place.
It will be necessary when using the portable DVD navigation unit mounting stay.
NOTE
1413
NOTE
After having adhered the stand base, remove the portable DVD
navigation unit and leave the stand base as is for at least 24 hours.
Immediately after adhering to the surface, the adhesion strength may be
too weak to ensure a firm hold.
* Depending on the shape/material of the dashboard, the double-surface adhesive tape alone
may not have sufficient adhesive strength. Use the tapping screws included with the unit (4
screws) and securely anchor the unit.
(*In such a case, holes must be made into the dashboard. Exercise caution.)
2
Determine the installation position
Look from the driver’s seat and verify
that the unit is not obstructing the view of
the road. Change the mounting area
should the unit block the view.
tWARNING
Press the tab and remove.
HOW TO INSTALL THE UNIT (2)
GPS EXTERIOR ANTENNA INSTALLATION METHOD (1)
Determine a position for mounting the unit onto the dashboard that renders it
easy to view. Bend and flex the adhesive surface of the stand base to
correspond to the curves of the dashboard.
3
Install the stand
Remove the unit from the stand base once, remove the blue sheet from the back
of the stand base, place the stand onto the desired mounting area (dashboard)
and apply pressure.
Fix the cushion included with the unit
where the unit mounting stay and the
dashboard come into contact.
(Example: when using the mounting stay)
Cushioning material
Portable DVD
Navigation System
Portable DVD Navigation System
4
Mounting the portable DVD navigation unit
* Tightly fasten the affixing screws for each part of the stand. Not tightening
enough may cause the unit to change the installation angle or fall over due to
the vehicle’s vibrations.
1
Connect the antenna to the portable DVD navigation unit
The GPS exterior antenna must be connected in order to use the unit as a navigator.
Not doing so will render present geographic location determination impossible.
Cushioning material
Stand base
Stand base
Remove
Dashboard
* Tapping screw
(M3 x 8)
INSTALLATION METHOD REMOVAL METHOD
To the GPS exterior
antenna terminal
Tab
2
Installing onto the exterior chassis (see 15 page)
Installing the antenna in the vehicle interior may render proper electromagnetic
wave reception impossible.
It is preferable to install it onto the exterior chassis.
Install horizontally onto an area that will ensure that the chassis will not obstruct
electromagnetic wave reception (vehicle exterior or the front of the dashboard.)
* To ensure a firm installation, make sure to mount on a flat surface of the chassis.
Refer to page ?? for the angle and
vertical position adjustment method.
1615
INSTALLATION EXAMPLE
¡Pull the wire through the vehicle interior and take it out through the trunk.
¡Pass the antenna cord through the waterproof packing and adhere it in an area where it
is in contact with the vehicle’s waterproof rubber.
¡Affix cord clips if necessary.
¡Install the GPS exterior antenna horizontally onto a flat metal surface of the vehicle’s
exterior chassis.
Taking the antenna out from the trunk
¡Pull the wire through the vehicle interior and take it out from the driver’s seat.
¡Affix cord clips if necessary.
¡Install the GPS exterior antenna horizontally onto a flat metal surface of the vehicle’s
exterior chassis.
If taking the antenna outside from the driver’s seat
GPS exterior antenna cord (under the seat)
*Make sure not to have the cord get caught in the seat rails.
¡Affix cord clips if necessary.
¡Install the GPS exterior antenna horizontally onto a flat area of the dashboard.
If taking out the antenna from the passenger seat
* If proper
reception is
impossible,
mount it
onto the
vehicle’s
exterior
chassis.
CAUTION
Separate the GPS exterior antenna and cord from the radio antenna and cord (not doing
so will cause radio interference).
When adhering the waterproof packing, cord clip or the GPS antenna, make sure to wipe
the adhesion surface clean (any dirt left on the surface will reduce the adhesion
strength).
Be careful so as to not let the antenna cord get caught in the chassis.
To ensure stable wave reception, it is recommended to mount the antenna on the
vehicle’s exterior chassis.
Do not install the antenna inside the vehicle without its mounting plate. This will lead to
extreme deterioration of reception sensitivity. The mounting plate is unnecessary if
installing onto the exterior of the chassis.
If using the GPS exterior antenna inside the vehicle, separate it from the unit by at least
10 inches to prevent interference.
If installing the antenna in the front of the dashboard, some vehicle models have thermal
insulation glass or heat insulating film applied onto the glass. These insulators possess
an electromagnetic wave reflection property that may significantly reduce reception
sensitivity. Also, reception sensitivity may drop if your vehicle windshield has been lined
with a mirror type film.
For automobiles equipped with airbags (SRS Dual Airbag, SRS Side Airbag, SRS
Curtain Airbag, etc., names vary depending on the maker), do not under any
circumstance install the antenna in a way that obstructs the airbag cover or would
hinder its proper operation. Do not reconfigure the wiring. In the event the airbag is to
be deployed, it may not function correctly. (*Decide on the antenna’s mounting position
after thoughtful consideration for safety and consultation with the place of purchase.)
GPS EXTERIOR ANTENNA INSTALLATION METHOD (2)
Cord clip
GPS exterior antenna
* Pass the antenna cord through the door’s
rubber packing and bring it outside.
GPS exterior
antenna cord
Cord clip
GPS exterior antenna
Waterproof packing
GPS antenna cord
(under the floor)
Cord clip
Separate by 10 inches or more
GPS antenna
Black side
Double-surface
tape
GPS antenna
mounting plate
Dashboard
tWARNING
17
INTRODUCTION
18
I
N
T
R
O
D
U
C
T
I
O
N
SAFETY PRECAUTIONS ..................................................................................19
CAUTIONARY ITEMS FOR PROPER USAGE .................................................24
MAIN FEATURES..............................................................................................28
ABOUT DISCS...................................................................................................31
WHAT IS A NAVIGATION SYSTEM..................................................................34
ABOUT THE GPS EXTERIOR ANTENNA ........................................................36
COMPONENT NAMES AND FUNCTIONS (1)..................................................37
CHARACTER INPUT USING THE 10-KEY ON THE REMOTE CONTROL .....45
HOW TO HANDLE THE REMOTE CONTROL .................................................47
ABOUT THE POWER SOURCE .......................................................................50
INSERTING/REMOVING A DISC......................................................................52
2019
SAFETY PRECAUTIONS (1)
Do not use the unit as a maritime or aviation navigation
system or as a map for mounting climbing.
Use only the specified power source
(shown on the right). Do not use with a 24V vehicle
battery (truck, bus).
This may cause fires or electric shocks.
Use only the specified power cord (shown on the right).
Do not remodel or reconstruct the cord
This causes fires.
Do not view the navigation maps, DVDs or videos while
walking.
Use the unit only when standing still in a safe place.
Not doing so may cause accidents or injury.
120V AC power source
12V vehicle battery
: eThis symbol is to prohibit certain actions by the operator. The following
illustration will contain a specific warning message (the figure on the left
prohibits dismantle ).
: wThis symbol is to indicate certain actions for the operator. The following
illustration will contain a specific message (the figure on the left is a common
example).
¡To ensure proper usage of the unit, read this instruction manual prior to use.
¡After having read it, keep in a safe place for quick reference.
Indications appearing both in this manual as well as on the unit itself contain cautionary
items to ensure that the unit is used safely in order to prevent the operator or others nearby
from being harmed or injured.
The message following this symbol involves the likely possibility of
serious injury or even loss of life.
The message following this symbol involves the possibility of injury
or material damage.
tWARNING:
tCAUTION:
The content of warning messages may also depicted as illustrations.
WARNING
Do not place or install the unit in an area that would
hinder the view of the road, obstruct driving operations
(such as steering, shifting or breaking), pose a danger to
passengers or obstruct the deployment of the airbag
system. Otherwise, traffic accidents or injury may result.
If using the unit as an automobile navigator, use the
included installation kit and securely affix the unit.
Otherwise, traffic accidents or injury may result.
Do not operate the unit or replace discs while driving.
Do so only after having stopped the vehicle in a safe place.
Otherwise, traffic accidents may result.
Do not use headphones while driving.
Traffic accidents may result.
Do not dismantle or remodel the unit.
Accidents, fires or electric shocks may result.
Do not use the unit if malfunctions occur such as if no
image is displayed or if no sound is emitted.
Accidents, fires or electric shocks may result.
In the event of foreign object infiltration into the unit,
water or beverage splashing onto the unit, smoke or a
strange smell coming from the unit or other abnormality,
immediately stop using the unit and consult the place of
purchase. Using the unit after such occurrences may cause
accidents, fires or electric shocks.
Exercise caution so as to not let the unit get wet nor let
water infiltrate into the unit (especially when using
during rain, snowfalls, near the coastline or near a body
of water). Fires or electric shocks may result.
Do not touch the antenna or the power supply plugs
when lightning is heard. However, when lightning is
heard from afar, immediately unplug the AC/DC adaptor
to avoid being struck by lightning. (If using outdoors,
immediately retract the antenna and stop using the unit.)
Fires or electric shocks may result.
Do not use a multi-connection plug.
Fires or overheating may result.
WARNING
Do not
dismantle
Do not
touch
Included AC/DC adaptor
Included 12V
automobile cigarette
lighter connection cable
Dangerous
Rock
Included installation kit
Dangerous
Dangerous
Yang!
Yang!
I hate
rain!
Flash!
Bang!
I
N
T
R
O
D
U
C
T
I
O
N
2221
SAFETY PRECAUTIONS (2)
CAUTION
Make sure that there is no dust adhering to the metal
contacts of the AC/DC adaptor. Dust or metal touching the
contacts may result in fires or electric shocks.
Do not damage, bend excessively, twist, pull or place
heavy weights on the AC/DC adaptor cord.
Should the cord get damaged (core wire exposed, cut, etc.)
request a replacement at the place of purchase. Using as is
may result in fires or electric shocks.
WARNING
Do not use the unit in areas of high temperatures for an
extended period (direct sunlight, in a vehicle under a hot
sun, etc.) and do not leave the unit in such areas.
Burns or fires may result.
Do not place or install the unit in areas where rain is
blown in by the wind or in areas prone to water splashes,
humidity or dust. Water, humidity or dust infiltrating the unit
may result in smoke emissions or fires.
Do not place the unit in areas where it may be exposed to
oil, smoke or water vapor such as near a kitchen counter
or a humidifier. Fires or electric shocks may result.
Do not place the unit on unsteady or inclined surfaces.
It may fall resulting in injury.
Do not use the unit if it is covered by a cloth
sheet or blanket. Fires may result.
Enjoy watching the unit at a suitable sound level.
High volumes may damage your hearing and, because
exterior sounds become muffled, traffic accidents may result.
If the unit’s power supply is the vehicle battery, do not
leave the vehicle engine turned off for extended period
while operating the unit.
The vehicle battery may weaken and die out.
While driving, adjust the volume of the unit so that
exterior sounds can be heard well. Driving without being
able to hear exterior sounds may lead to traffic accidents.
Should the instructions provided by the navigation unit
differ from the actual traffic conditions, proceed to drive
in accordance with the actual traffic conditions.
Accidents may result.
Do not place the AC/DC adaptor cord near a heater.
The cord’s plastic sheath may melt and result in fires or
electric shocks.
When unplugging the AC/DC adaptor cord, do so by
pulling on the plug itself, not the cord.
Pulling on the cord may result in damage to the cord and lead
to fires or electric shocks.
Do not handle the AC/DC adaptor cord with wet hands.
Electric shocks may result.
When cleaning the plug or when not using the unit for an
extended period, disconnect the AC/DC adaptor from the
power supply for safety.
Electric shocks or fires may result.
Do not place the plug on the floor with the metal contacts
facing upward.
Stepping on it in this condition may cause injury.
Do not look directly at the laser light source.
Doing so may cause eye damage.
Do not press on the liquid crystal panel with excessive
force or expose it to impacts.
The liquid crystal panel glass may crack resulting in injury.
Should the liquid crystal panel crack, do not come into
contact with the liquid coming from the interior of the
panel. This may lead to inflammation of the skin.
¡Should the liquid be accidentally ingested, see a doctor
immediately.
¡Should the liquid get into the eyes or onto the skin, wash out
with a large amount of water and see a doctor immediately.
CAUTION
Pull out
the plug
Clean the
dust away
sometimes,
ok?
It’s hot!
It’s hot!
Wobble!
Wobble!
Laser light
source
I
N
T
R
O
D
U
C
T
I
O
N
23 24
SAFETY PRECAUTIONS (3)
For safety, adhere the stand base onto a surface that would enable secure
anchoring. Depending on the dashboard material (PP: polypropylene or
other), the double-surface adhesive tape alone may not be strong enough
to affix the unit. Use the tapping screws included with the unit (4 screws)
to securely anchor it.
* For such a case, holes need to be made into the dashboard. Proceed with
caution.
(*In case of a prominent curved surface, the adhesive area is reduced
resulting in unsteady mounting. The unit may not be mountable onto such a
surface.)
For vehicles equipped with airbags (SRS Dual Airbag, SRS Side Airbag,
SRS Curtain Airbag, etc.), do not under any circumstance install the unit
in a way that obstructs the airbag cover or would hinder its proper
operation. Do not wire the antenna cord in such an area.
In the event the airbag is to be deployed, it may not function correctly.
(*Decide on the unit’s mounting position after thoughtful consideration for safety
and consultation with the place of purchase.)
If the surface on which the unit is to be adhered is not plastic (leather,
wood, upholstery, etc.), the surface finish may become damaged
rendering installation using adhesives impossible.
Should the stand base adhesive get torn off the dashboard, slowly and
carefully peel it off the surface.
Because strong adhesive tape is used, peeling off with excessive force may
damage the dashboard surface finish.
CAUTION
CAUTIONARY ITEMS FOR PROPER USAGE (1)
¡The adhesive strength of the double-surface tape decreases at
low temperatures (20°C (68°F) or less). Adhere the unit onto the
dashboard after having increased the temperature using the
vehicle heater.
¡Adhere the unit after having cleaned off any dirt from the
mounting surface using the cleaning solution included with the
unit and let dry.
¡Once the double-surface adhesive tape is peeled off, it
cannot be re-adhered.
¡After installation, periodically check if the tape is still holding well.
¡Tightly fasten the screws affixing each part of the stand.
¡Do not mount the portable DVD navigation unit immediately
after having adhered the stand base to the mounting
surface. Leave the stand base as is without the unit
mounted for at least 24 hours after adhering it to the
dashboard.
¡Apply pressure onto the mounting surface by pressing on the
stand base after having adhered it to the dashboard.
¡The cushion included with the unit is used to keep the unit from
vibrating. Install it as per the instructions in the manual.
WHEN INSTALLING THE UNIT
It’s cold!
Use the
cleaner!
You only get one
chance to stick it on!
Check the
adhesion
quality!
Fasten the
screws tightly
Let it sit for at
least 24 hours
Apply lots
of pressure
Use the cushion
¡The unit may not function properly in extreme cold or extreme hot
conditions. Bring the ambient temperature back to normal to ensure
proper operation.
¡Do not leave the unit in areas of high temperatures (direct sunlight or in a
vehicle under the hot sun) or low temperatures (outdoors in cold weather).
Damage and deformation may result.
¡When the temperature exceeds 50°C (122°F), the unit automatically cuts
off the power supply to prevent damage to the liquid crystal display. After
having returned to the standard usage temperature range (0°C (32°F) to
50°C (122°F) when in NAVI/VIDEO mode), turn on the power supply and
normal operation will be possible.
ABOUT THE TEMPERATURE
I
N
T
R
O
D
U
C
T
I
O
N
2625
CAUTIONARY ITEMS FOR PROPER USAGE (2)
During raining days, when the humidity level
is high or immediately after having turned on
the heater in cold temperatures, condensation
(water drops) may form on the optical lens
inside the unit. Using the unit in this condition
may result in laser malfunction rendering
normal operation impossible. Results may
depend on the ambient environmental conditions,
however, the condensation will evaporate and normal operation will be possible after
removing the disc and leaving the unit unused for roughly 1 hour.
ABOUT CONDENSATION
Take out the
disc and
wait about 1
hour, ok?
Exposing the unit to vibrations may result in the following conditions:
¡DVD video/CD/JPEG imaging: Sound and image disturbance, however, both return to
normal when vibrations cease.
¡Map disc: Rarely affected by vibrations, however, on rare occasions, symptoms such
as the map disappearing from the screen may occur. Operation returns to
normal when vibrations cease.
ABOUT VIBRATIONS
Everything will
be back to
normal when
vibrations stop!
¡Direct sunlight will cause the display to blacken
due to reflection of the sunrays. Avoid direct
sunlight.
¡The display is best viewed from directly in front of
the unit. Watch the screen within a 45° angle
vertically and a 90° angle laterally from the unit.
¡Red and blue points of light may appear in the display. This is normal for a liquid
crystal display and does not mean the display is damaged.
¡The display uses a small fluorescent tube as a backlight for liquid crystals. If the
screen goes black and does not light up, consult the place of purchase.
ABOUT THE DISPLAY
45° vertically
90° laterally
Because the most detailed map reduction scales provided by the map disc vary
depending on the region, when moving the map screen to a region of varying reduction
scale, the screen may not show a map. Continue moving the map to return the normal
driving map screen and the reduction scale will change to the most detailed map for the
region presently displayed.
ABOUT THE DETAILED MAP SCREEN DISPLAY
Using the unit when the vehicle engine is turned off may lead to
weakening of the battery. Do not use the unit for an extended period
with the engine turned off.
ABOUT USING THE UNIT WITH THE VEHICLE ENGINE TURNED OFF
(WHEN THE UNIT POWER SOURCE IS THE VEHICLE BATTERY)
¡Dust easily adheres to the screen necessitating
periodical cleaning. When cleaning, cut off the
power supply and wipe the screen with a soft
cloth. Do not use a wet cloth and do not rub the
screen with a hard object or hit the screen.
ABOUT CLEANING
¡Applying benzene, thinner, pesticides or other volatile substances to the cabinet or
panel may lead to their infiltration into the surface. Do not use these substances.
Also, applying cellophane tape, band-aids or other adhesive object will result in
soiling and damage to the cabinet or panel. Avoid applying these objects.
Do not use the unit or the included GPS exterior
antenna close to other electronic devices in
operation (TV, radio, PC, etc.). This may lead to
reception interruptions in these devices.
ABOUT RECEPTION INTERRUPTIONS
Thinner
Pesticide
Benzene
I
N
T
R
O
D
U
C
T
I
O
N
2827
CAUTIONARY ITEMS FOR PROPER USAGE (3)
MAIN FEATURES (1)
The unit shows you the way just by
selecting a destination point.
By registering the location of your home
and pressing the Ç button, the
navigation unit will show you the
recommended route from your present
location to your home or destination.
zSee p.103, “Searching for a way home”.
Search for your destination by
entering the address and telephone
number.
NAVIGATION
The route is displayed right up to
your destination.
Vocally guides you in an accurate
and easy to understand way.
(Voice guide)
Enlarges highway junctions.
(Junction guide)
zSee p.115 and 116, “Display Intersection
Enlargements”.
3 route selections displayed
(Multiple route search)
The navigation unit finds different routes
with different conditions leading to your
destination. Routes prioritizing Faster
Route, Shorter Route or Optimal are found
simultaneously.
zSee p.89, “SINGLE-ROUTE/MULTI-
ROUTE SEARCH”.
* The distance and required time are displayed
as a guide. These may differ from the actual
conditions.
¡Do not use for an extended period on a blanket,
rug, carpet, cushion or other object that
obstructs the proper release of heat. Heat will
get trapped in the unit and lead to damage.
ABOUT THE INSTALLATION AREA
¡Do not let urethane or rubber made sheets or vinyl articles come into contact with the
unit for extended periods. This may lead to the paint falling off the cabinet or panel
surface and lead to a deterioration of the visual appearance.
Do not place heavy objects such as a golf bag on
top of the unit or hit the unit with such objects. This
may cause the case to crack and lead to breakage
as well as malfunctions.
It’s hot!
Heavy
Please be advised that SANYO will not assume any responsibility whatsoever for any
troubles arising from mishandling the unit as a result of not following the cautionary
items described within this manual. The unit is not guaranteed for troubles arising form
improper handling or using the unit in a way contrary to conventional wisdom.
GUIDES YOU TO YOUR
DESIRED DESTINATION
DISPLAYS THE RECOMMENDED ROUTE
ALL THE WAY TO YOUR DESTINATION
I
N
T
R
O
D
U
C
T
I
O
N
3029
MAIN FEATURES (2)
Three-dimensionally displays from
a viewpoint enabling a wide area
perspective
The unit provides a detailed display of the
actual position and surroundings from an
angle looking down and towards your
heading from far above.
zSee p.59, “Switching maps”.
Constant turning direction display
(Crossing Enlargement Display)
While driving, the turning direction at the
next intersection may be constantly
displayed.
zSee p.120, “Select to enable/disable simple
turn indications”.
zSee p.140, “DVD/CD/JPEG imaging
operation”.
Multi-voice function
Switch to the desired audio language and
enjoy the show.
* The unit cannot be switched to a language
that is not recorded in the DVD video being
played back.
Multi-subtitle function
Switch to the desired subtitle and enjoy
the show.
* The unit cannot be switched to a language
that is not recorded in the DVD video being
played back.
Multi-angle function
Switch the angle for DVD videos with
multiple recorded angles and enjoy the
show.
DISPLAYS THE CITY
REALISTICALLY
DVD VIDEO/CD
Dual battery format
For the power source, the unit uses either
a 12V vehicle battery or a 120V AC, 60Hz
household power source.
TFT color liquid crystal display
A high picture quality liquid crystal display
enables beautiful and easy to view
imaging.
Headphone (output) terminal
provided
The sound can be heard using
commercially available headphones.
Extension (output) terminal
provided
Audio I/O and optical digital audio
output terminal provided
¡The sound can also be heard through a
TV or amp by connecting them to the
unit (when in NAVI or DVD mode).
¡Connect a video deck/video camera to
the unit to hear the sound outputted
from those mediums through the unit
(when in VIDEO mode).
Video I/O terminal provided
¡The unit’s image output may be viewed
from a TV by connecting it to the unit
(when in NAVI or DVD mode).
¡The image outputted from a video
deck/video camera can be viewed
through the unit by connecting it to
those mediums (when in VIDEO mode).
S-video output terminal provided
If an S-video input terminal is provided on
the TV to be connected to the unit, using
that terminal for the connection will enable
a clearer, sharper image (when in DVD
mode).
OTHER FUNCTIONS
I
N
T
R
O
D
U
C
T
I
O
N
3231
ABOUT DISCS (1)
Map DVD-ROM included with the unit
DVD videos
Music CDs
The following discs cannot be played back.
¡DVD-R ¡DVD-RAM ¡CD-ROM ¡VSD ¡CD-G
¡Photo CDs ¡CD-Extra (data only) ¡Mixed CD ¡CD-RW ¡Video CDs
¡DVD-RW ¡Active Audio (data only) ¡DVD+R ¡DVD+RW
¡CDs with copy protection function (copy control CDs)
¡Any DVD video disc with any displayed region number other than “1” or “ALL”.
¡Any disc recorded with a color TV format other than NTSC (PAL, SECAM).
¡Discs recorded with a DVD video burner.
* JPEG images only can be played back from CD-R discs.
zSee P.158, “Viewing JPEG images”.
About 3inch(8cm) discs
This unit does not require an 3inch(8cm) disc adaptor. Insert 3inch(8cm) discs just like
any 5inch(12cm) disc.
About specially shaped discs
Do not use specially formed discs such as heart-shaped or hexagonal discs with this
unit. These may not only damage the unit but, when ejecting the disc, it may fly out and
cause injury due to its high speed rotation.
About the included map DVD-ROM
This disc is especially made for the unit. Using in another device may lead to damage to
that device.
About copy protected CDs (copy control CD)
The world is divided in 6 regions with corresponding region numbers for DVD software.
This is to enable DVD players to playback only DVD software with corresponding region
numbers. This unit will not playback any DVD video disc whose region number is other
than “1” or “ALL”.
This unit’s region number is “1”.
1
¡Discs whose region number is “ALL” can be played back by DVD players with any
region number regardless of the region.
¡Discs whose region number is not indicated has a region number even though it is
not shown. Contrary to discs that can only be played back using only DVD players
with corresponding region numbers, there is a possibility that discs with no indicated
region number may be played back using any DVD player regardless of the region.
¡This unit will not playback discs recorded with a color TV format other than NTSC
even if the region number is “1” or “ALL”.
Hint
Your JPEG imaging recorded in CD-R discs via a PC can be viewed.
zSee p.158, “Viewing JPEG images”.
DISCS THAT CAN BE PLAYED BACK USING THE UNIT
Use CDs that conform to CD Disc standard such as those with the CD logo
mark printed on its label.
Using a CD with a copy protected function configuration whose purpose was to prevent
computer aided reproduction may not playback normally. This is not due to a
malfunction of the unit but rather to a phenomenon that occurs due to the lack of
conformity of copy protected CDs (copy control CD) to CD standards. Should problems
occur with the playback of copy protected CDs (copy control CD), consult the place of
purchase.
ABOUT REGION NUMBERS
JPEG IMAGING
I
N
T
R
O
D
U
C
T
I
O
N
3433
ABOUT DISCS (2) WHAT IS A NAVIGATION SYSTEM (1)
What is GPS
“GPS” is a global positioning system developed by the
United States Department of Defense whereby 3
electromagnetic signals are simultaneously received
from NAVSTAR (GPS satellite), hovering at 13,000
miles above the earth. The principle by which this
system locates the present location of your vehicle
entails triangular measurement based on the distance
between the satellite and your vehicle as well as the
orbit of the satellite.
Positioning accuracy
The accuracy of the present positioning can be determined by the color of the “GPS reception
display” mark located on the upper right corner of the present location display screen.
GPS reception display
¡Try not to touch the recorded surface of discs
when holding them.
¡Adhere paper or seals to the printed or
recorded surface of the disc in a way so as not
to scratch the disc.
¡Do not use discs with dried glue from peeled
off cellophane tape or labels. The discs may
not be retractable resulting in damage to the
unit.
¡The discs are rotated at a high speed. Do not
use cracked or warped discs.
¡To prevent warping, store in a case away from
direct sunlight. Do not place them on the seat
or dashboard in vehicles under direct sunlight
especially during the summer months when
temperatures rise significantly.
¡Prior to use, gently wipe away any dirt, dust or
fingerprints from the recorded surface of the
disc using a soft cloth from the center of the
disc towards the edges.
¡Do not use a record spray or an antistatic
agent. Also, discs may get damaged by
benzene, thinner or other volatile substance.
Do not use these.
HOW TO HANDLE DISCS
Printed surface
Record
cleaner
Thinner
Benzene
ABOUT THE GPS (GLOBAL POSITIONING SYSTEM)
Because signals from the GPS satellite are controlled by TACC (Tracking and Control
Center), accuracy may be diminished or signals may be stopped intentionally.
Hint
¡Because positioning may take time even as signals are being received from the
GPS satellite, for roughly 3 to 4 minutes after having turned the unit ON, the
precision display will not be effectuated and the GPS reception display color will
remain gray.
¡When the unit receives signals usable for positioning from the GPS satellite, the
present location is displayed on a map. However, because there is a margin of error
of about 100 to 650 feet, the actual position and the location appearing on the map
may not always correspond. Also, because the GPS satellite is controlled by the
U.S. Department of Defense, data from measurement signals may be intentionally
modified. In such cases, the present location display error will be significant. To
correct this discrepancy, the unit is equipped with a map matching function*.
*: Because there may be instances when positioning errors made by the GPS satellite
occur, the unit may determine the present location in an area other than on a road
(ex.: in a river). During such instances, this function makes the unit think that “a
vehicle is a thing that runs on a road” and corrects the present location to the
nearest road.”.
Hint
Electromagnetic waves
GPS exterior
antenna
(Yellow): The present location is determined.
(Gray): The present location is not
determined or is in the process of
being determined.
I
N
T
R
O
D
U
C
T
I
O
N
3635
WHAT IS A NAVIGATION SYSTEM (2) ABOUT THE GPS EXTERIOR ANTENNA
¡Refer to the installation manual for how to install the antenna onto your vehicle.
¡After installation, make sure to follow the instructions below:
Do not apply paint or auto wax to the GPS exterior antenna. This may lead to reduced
reception sensitivity and a loss of signal reception from the GPS satellite.
Do not strike the antenna with an excessively strong spray of water when cleaning your
vehicle. Also, remove the antenna from your vehicle before entering a carwash chamber.
The reception sensitivity is diminished by the accumulation of snow on the antenna.
Remove the snow.
The GPS exterior antenna is equipped with a powerful magnet. Do not bring magnetic
cards, cassette tapes or watches in close proximity to the antenna. (This may damage
the antenna and render it useless.)
About present location errors
The mark denoting your vehicle’s present location and heading may not be displayed
accurately under the conditions mentioned below. The unit is not damaged. Continue
driving (about 30 minutes at 20 mph) and the display will return to normal.
¡Running in reverse
¡Under a continuous elevation
¡In a tunnel exceeding 1 mile in length
¡When meandering in curves
¡When the vehicle’s speed changes abruptly (after exiting a toll booth and accelerating
towards a tunnel)
¡On a loop bridge
¡When using the unit for the first time
¡After debarking a ferry
¡After driving with the DVD screen
¡After driving with the VIDEO screen
¡During tire replacement
¡During tire chain installation
¡When taking the unit into a different vehicle
¡When crisscrossing through a parking lot (especially in an underground or multi-
storied parking structure)
After having purchased the unit, mount
the GPS exterior antenna outside.
Press the protrusion and remove.
¡The GPS exterior antenna must be connected in order to use the unit as a navigator.
(The unit cannot use other types of antennas.)
Not doing so will render present geographic location determination impossible.
INSTALLATION METHOD REMOVAL METHOD
To the GPS exterior
antenna terminal
Tab
After having purchased the unit, the unit will display the present location as in the San
Francisco area. Signals from the GPS satellite cannot be received from inside a
building. If the present display does not change from the San Francisco area map,
this means that the unit is not receiving any signals from the GPS satellite. Take the
antenna out to a location where signals are not obstructed and proceed with
reception.
zSee p.183, “Receiving signals from the GPS satellite”.
Hint
Paint
Wax
Cassette tape
I
N
T
R
O
D
U
C
T
I
O
N
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110

Sanyo NV-E7000 - Portable GPS And Mobile DVD Entertainment System Istruzioni per l'uso

Categoria
Navigatori
Tipo
Istruzioni per l'uso