Canon REALiS LCOS WUX450ST Pro AV Manuale utente

Networked Multi-Projection

Overview

Operation in Each Mode

Functions

Networked Multi-Projection

Setup and Instructions

ENG

NMPJ Ver. 1.3 User’s Manual

2

Table of Contents

Safety Instructions........................ 4

Federal Communication Commission

Notice ...................................................... 4

Open Source Software ................. 7

Networked Multi-Projection

Overview...................................9

Introduction to Networked Multi-

Projection .................................... 10

Installation ................................... 14

System Requirements ......................... 14

Installation ............................................ 15

Uninstallation .............................. 16

From Startup to Shutdown......... 18

Operation in Each Mode........25

Using the Projector in Direct

Mode............................................. 26

Procedure ............................................. 26

Direct Mode Window............................ 28

Using the Projector in Meeting

Mode............................................. 30

Creating a Session............................... 30

Joining a Session ................................ 35

Meeting Mode Window ........................ 36

Using the Projector in Classroom

Mode............................................. 38

Leading a New Session ....................... 38

Joining an Existing Session ............... 43

Classroom Mode Window (Starting a

Session) ................................................ 45

Classroom Mode Window (Joining a

Session) ................................................ 47

Using the Projector in Broadcast

Mode............................................. 49

Procedure ............................................. 49

Broadcast Mode Window .................... 51

Functions................................53

Using the Session Selection

Menu............................................. 54

Session Selection Menu...................... 54

Finding Sessions ................................. 55

Using the Projector Selection

Menu .............................................56

Projector Selection Menu.................... 56

Using Layout Functions .............61

Completing Software Projection

Settings ........................................67

Reducing Windows to a Compact

Size ...............................................69

Split-Screen Display with Non-

Network Sources .........................70

Tips for Better Networked

Projection.....................................71

Restrictions..................................72

3

Use of this manual

This manual does not provide the detailed description of basic operation and

functions for computer, web browser, projector and network. For instructions

about each piece of equipment or software, please refer to the respective

manual.

Trademarks

• Microsoft, Windows, Windows Vista, Windows 7, Windows 8, Windows 8.1

and Windows 10 are registered trademarks of Microsoft Corporation in the

United States and other countries.

• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT

Alliance.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• Wi-Fi CERTIFIED, WPA, WPA2, and the Wi-Fi CERTIFIED logo are used in

reference to methods of configuration developed by the Wi-Fi Alliance.

• All other trademarks are the property of their respective owners.

* Unauthorized use of a part or whole of the contents in this manual is

prohibited.

* The contents of this manual are subject to change without notice.

Symbols Used in This Manual

Meanings of the symbols used in this manual are as follows.

Indicates precautions and information to note when using the projector.

4

Safety Instructions

Federal Communication Commission Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

The cable with a ferrite core provided with the projector must be used with this

equipment in order to comply with Class B limits in Subpart B of Part 15 of the

FCC rules.

Use of a shielded cable is required to comply with class B limits in Subpart B of

Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise

specified in the instructions. If such changes or modifications should be made,

you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Park, Melville, New York 11747, U.S.A.

Tel No. (631) 330-5000

5

Safety Instructions

CAUTION IN USING THE PROJECTOR VIA

NETWORKS

• When you find a problem with the projector, remove the power cable immediately

and inspect the unit. Using the projector with failure may cause fire or other

accidents.

• If you remotely use the projector via networks, carry out a safety check regularly

and take particular care to its environment. Incorrect installation may cause fire or

other accidents.

Caution in using network function

• We assume no responsibility for the loss or damage of data, or damage of the

computer caused by using this projector. Making back-up copies of valuable data

in your computer is recommended.

Safety instructions

Please read and understand all instructions thoroughly before using.

About safety symbols

The following symbols are used in this manual to alert you to important safety

information. Always observe the instructions to reduce the risk of injury and

property damage.

Indicates a potentially hazardous situation which, if not avoided,

may cause death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

may cause minor or moderate injury.

Safety Instructions

6

Safety information

Notice regarding network security

Measures to ensure network security are the responsibility of the customer. Canon

assumes no responsibility for direct or indirect damages due to network security

issues such as unauthorized access.

Data transfers between the NMPJ software and the projector are not encrypted, so

it is possible that image data sent from the software to the projector could be

intercepted and viewed by a malicious third party if the software is used on an

unsecured network.

Make sure that appropriate security settings have been made on the projector, the

computer, and the network when using the software.

• Do not connect the projector to the Internet directly; make sure it is configured as

part of a network with a firewall or similar protection.

• When using the projector in a wireless LAN environment, it is recommended that

appropriate wireless LAN security settings be used.

• Make sure to change the NMPJ password and wireless LAN security key at

regular intervals.

Always mount and operate the product in accordance with the safety instructions

specified by the projector and peripheral equipment makers.

• Do not attempt to disassemble or service the product yourself. Doing so may

result in a fire, an electric shock, or product damage.

• If the projector emits a strange odor, or makes a strange noise, immediately

turn the power and peripheral equipment off, unplug these devices, and

contact your dealer.

• Do not drop the projector or subject it to strong shocks. Doing so may result

in damage to the internal parts, an electric shock, a fire, or product damage.

• Do not touch the projector with wet hands when the power cord plugs of the

projector or peripheral equipment inserted into the electrical outlet.

Otherwise, an electric shock may result.

7

Open Source Software

The NMPJ software incorporates third-party software modules. For details, follow

the procedure on P15 to download the compressed archive file containing the

NMPJ software. Extract the contents of the compressed archive file and refer to the

“ThirdPartySoftware.pdf” (third-party software license) file in the

[thirdparty_software] > [NMPJ] > [LICENSE] folder.

Each module’s license conditions are also available in the same folder.

8

9

Networked Multi-Projection

Overview

Operation in Each Mode

Functions

Networked Multi-

Projection

Overview

10

Introduction to Networked Multi-Projection

Networked Multi-Projection (NMPJ) is a projector function enabling projection of

computer screens over a local network.

■ Projection Over a Network

Using this software, you can link multiple computers and multiple projectors, for a

variety of projection scenarios.

■ Split-Screen Projection of Multiple Images

Images from multiple computers can be projected at once, with the images

projected in separate areas of a single screen.

■ Projection of an Image from Multiple Projectors at Once

Images from a single computer can be projected from multiple projectors at once.

Links computers and projectors via a network connection.

• Direct Mode

LAN

Projection of multiple computer screens in split-screen display.

• Meeting Mode, Classroom Mode

LAN

Projection of one computer screen from multiple projectors.

• Meeting Mode, Classroom Mode, Broadcast Mode

Introduction to Networked Multi-Projection

12

■ Making Connections to the Projector

There are two ways to make connections to the projector via a network:

“infrastructure connection” and “wireless direct connection.”

Infrastructure Connection

• Infrastructure connection is a method of establishing connections with a projector

that has been configured for the wired or wireless LAN infrastructure mode in the

network function settings. This connection method is suitable for projectors that

are already connected to the network.

It is not possible for a projector that is not equipped with wireless LAN functionality to

connect to a wireless LAN network.

Wired LAN enabled

on the projector

Access point Router, hub, etc.

Projector connected to wired LAN

Wireless LAN

infrastructure

mode enabled

on the projector

Access point Router, hub, etc.

Projector connected to multiple wireless LAN networks

Access point

13

Introduction to Networked Multi-Projection

Networked Multi-Projection Overview

Wireless Direct Connection

• Wireless direct connection is a method of establishing connections between a

computer with wireless LAN support and a projector that has been configured for

the Pj AP (projector access point) mode. This connection method makes it

possible to project screen images by means of direct communication between the

computer and projector, even if the projector is not connected to the network.

It is not possible to use wireless direct connection with a projector that is not equipped

with wireless LAN functionality.

Wireless LAN Pj AP mode

enabled on the projector

14

Installation

To use the NMPJ function, you must install the NMPJ software (hereafter, “the

software”) on the computers to be used.

Instructions in this manual are for installation in a Windows 7 environment.

System Requirements

Software system requirements are as follows.

CPU Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit)

Memory 1 GB or more

HDD 32 GB or more

Monitor Resolution: 1024x768 dots or more

Operating

System

Windows Vista (Business) SP2

Windows 7 (Home/Professional/Ultimate) SP1

Windows 8 (Pro)

Windows 8.1 (Pro)

Windows 10 (Pro)

* Windows Vista compatibility is limited to 32-bit editions.

* Both 32- and 64-bit editions of Windows 7 and later are supported.

Network In TCP/IP network environments, projectors can be connected to

computers via the following LAN connections.

Wired LAN (1000BASE-T, 100BASE-TX)

Wireless LAN (IEEE 802.11b/g/n)

Cannot be installed on computers without a minimum resolution of

1024x768. Additionally, operation is not ensured if the resolution is

switched to less than 1024x768 after installation.

• Operation is not ensured in other operating systems or editions.

• Menus are in English in all cases, except in Japanese and

Simplified Chinese versions of the software.

• Operation is not ensured in operating systems other than

English, Japanese, or Simplified Chinese OSes.

• If you are using an Aero style in Windows, this message may be

displayed: “Do you want to change the color scheme to improve

performance?”

In this case, selecting “Keep the current color scheme, and don’t

show this message again” is recommended.

• Although the software also supports computer-projector

communication over a router, operation is only ensured over one

router hop.

• When using wireless direct connection, configure the computer

to obtain a wireless IP address automatically (DHCP enabled).

Note that it is not possible to use wireless direct connection with

a projector that is not equipped with wireless LAN functionality.

15

Installation

Networked Multi-Projection Overview

Installation

1 Download the compressed archive file containing the NMPJ software

from the Canon website.

2 Extract the contents of the compressed archive file, and double-click the

executable installer file (NMPJInstaller-01-03-00**-********.exe).

Installation of the NMPJ software starts.

3 Next, follow the instructions displayed to complete the installation

process.

■ Updating the Software

If the software is installed on the computer and the computer is connected to the

Internet, it will check automatically to see if a newer version is available (auto-

update function). When a message offering to install a new version of the software

appears, you can update to the latest version of the software by following the

indications that appear.

• Confirmation or warning messages may be displayed during installation or

uninstallation.

These messages request administrator credentials from the current user. If you are

logged in as a user with administrator credentials, click [Yes] (or [Continue]) to

continue.

• Depending on the software, you may not be able to continue without administrator

credentials. If you are logged in as a standard user, switch to an administrator account

and try again.

• You may need to restart the computer to complete the installation process. If restarting

is requested, be sure to restart the computer.

• A message urging you to register the software with Windows Firewall is displayed

during the install process. It is recommended that you click “Yes” to register the

software with Windows Firewall and then proceed with the installation. If you click “No,”

the software will not be registered with Windows Firewall and the installation will

proceed, but Windows Firewall will display an error the first time the software is

launched. (P18)

• To check what version of the software is currently installed, click “ ” in the upper part

of the software window.

• The auto-update function cannot be used on Windows Vista.

16

Uninstallation

■ Windows 7 or Earlier

These instructions are for uninstallation in Windows 7 or earlier versions of

Windows.

1 Select [Start] > [All Programs] > [Canon NMPJ] > [ Uninstall network

multiple projection].

2 If a [User Account Control] message is displayed, click [Yes].

3 After the confirmation message is displayed, click [OK].

4 After uninstallation is finished, click [OK] when the confirmation message

is displayed.

5 Delete the following folder manually.

C:\Users\<User Name>\AppData\Local\Canon\NMPJ

■ Windows 8 or Later

These instructions are for uninstallation in Windows 8 or later versions of Windows.

1 On the [Apps] screen, right-click [ Network Multiple Projection] under

[Canon NMPJ].

2 In the menu displayed at the bottom of the [Apps] screen, click

[Uninstall]. Otherwise, click [Uninstall] in the app bar and then [Uninstall]

again on the screen displayed next.

3 In the [Programs and Features] screen that is displayed, select [Canon

NMPJ].

4 Select [Uninstall/Change].

5 After the confirmation message is displayed, click [OK].

You may need to restart the computer to complete the uninstallation process. If restarting

is requested, always restart the computer.

These files are hidden. To view hidden files, follow these steps.

Windows Vista

To view hidden files in Windows Explorer, select [Tools] > [Folder options] > [View] >

[Show hidden files, folders, and drives].

Windows 7

In Windows Explorer, select [Tools] > [Folder Options] > [View] > [Show hidden files,

folders, and drives].

You may need to restart the computer to complete the uninstallation process. If restarting

is requested, always restart the computer.

17

Uninstallation

Networked Multi-Projection Overview

6 Delete the following folder manually.

C:\Users\<User Name>\AppData\Local\Canon\NMPJ

These files are hidden. To view hidden files, follow the steps below.

In Windows Explorer, select [Tools] > [Folder Options] > [View] > [Show hidden files,

folders, and drives].

18

From Startup to Shutdown

The procedure from software startup to shutdown is as follows. Example windows

shown here are from Direct mode.

1 Select Network Multiple Projection from the Start menu.

(Windows 7 or Earlier)

Select [Start] > [All Programs] > [Canon NMPJ] > [ Network Multiple Projection].

(Windows 8 or Later)

Select [Start] > [Apps] (or [All Apps]) > [Canon NMPJ] > [ Network Multiple

Projection].

Windows Firewall

The following alert may be displayed the first time you start the software, depending on

your Windows Firewall settings.

To enable communication with projectors, select all check boxes and click the [Allow

access].

To change the settings after closing the alert, open the [Start] menu and select [Control

Panel] > [System and Security] > [Windows Firewall] > [Allow an app through Windows

Firewall].

Select [CANON Network Multiple Projection] in the list of allowed apps and features, and

then select each check box.

19

From Startup to Shutdown

Networked Multi-Projection Overview

2 Select the connection method.

In the connection method selection menu, click [OK] next to the desired

connection method.

3 Connect.

If the computer is equipped with multiple network adapters, or if one network

adapter has been assigned multiple IP addresses (IP aliases), a network

adapter selection menu is displayed. Click [OK] next to the desired network

adapter.

• It is not possible to select and use wireless direct connection with a projector that is not

equipped with wireless LAN functionality.

• It is not possible to select infrastructure connection if the computer’s wireless network

adapter is already connected to a projector configured for the Pj AP (projector access

point) mode.

• The same four buttons are shown in the upper right of this window and subsequent

windows. (Additional buttons are shown on some windows.)

View software help.

View settings window.

Minimize the window to the taskbar. To view the window again, click the taskbar icon.

Close the window.

• For infrastructure connection, unlinked network adapters are not listed.

• A message is displayed if you select a network adapter that is not currently available for

use.

• A message is displayed if the computer’s wireless LAN DHCP function is disabled

(static IP address). In order to use the network adapter you must enable the DHCP

function.

From Startup to Shutdown

20

4 A selection menu is displayed.

(Infrastructure Connection)

The mode selection menu is displayed. Proceed to step 5.

(Wireless Direct Connection)

The projector SSID selection menu is displayed. Click the SSID of the projector

you wish to connect. (P24)

5 On the mode selection window, click the desired mode.

(1) Direct Mode

When one computer is connected to one projector. (P26)

(2) Meeting Mode

When multiple computers are connected to multiple projectors. Useful when

showing multiple computer screens during meetings or other events. (P30)

• It is not possible to use wireless direct connection with a projector that is not equipped

with wireless LAN functionality.

• The SSIDs of projectors with wireless LAN support that have been configured for the Pj

AP (projector access point) mode in the network function settings are listed.

• An icon showing the signal strength is displayed to the left of each SSID.

• If security settings are enabled for the selected SSID, a Wi-Fi security key input window

is displayed. Input the security key. For information on SSID security key, refer to the

projector user’s manual.

(1)

(3)

(2)

(4)

La pagina si sta caricando...

Canon REALiS LCOS WUX450ST Pro AV Manuale utente

Questo manuale è adatto anche per

Canon REALiS LCOS WUX450ST Pro AV Manuale utente

in altre lingue

Documenti correlati

Altri documenti