TCL RF282BSF0UK Manuale utente

RB275GM1110

RP282BSF0

Warning: Under the climate types N, ST and T, the operating ambient range of the

appliance is 16℃~43℃. If the appliance operates outside the rated climate type (ambient

temperature range), the appliance may not maintain the satisfying interior temperature.

Safety instructions

3

The pictures are for reference only. Please refer to the object

5

lamp

Refrigerating door balcony

Multi-airﬂow

Lock

Simple

simple

EC O

simple

EC O

and hold the“Regulate”key for 3s

e"Regulate"key repeatedly.

ff

In the unlocked state, press the"Regulate"key repeatedly until the "power cool" icon flashes,

Simple

In the unlocked state,press the"Regulate"key repeatedly until the"simple"icon flashes,

In the unlocked state,press the"Regulate"key repeatedly until the"ECO"

room temperature 6℃ under"ECO"function.

The

Power cool function

Operation notes

Before reversing the door, please prepare the following tools: cross screw driver, wrench. Note:

please remove the main plug before reversing the door. Two people may be needed.

1.Close the door, take out the screw from the upper hinge cover with a cross screw driver, remove

the hinge cover, and then disassemble the connection terminal, screw off the top hinge, and take

down the door. Remove the screw cover on the left.

2.Take out the screws of the middle hinge with a cross screwdriver, remove the middle hinge,

remove the screw cover at the left screw hole, and take down the lower door.

3.Laying down the refrigerator, and remove the lower hinge and leveling angle at the bottom of the

refrigerator.

4.Remove the wire cover of the upper upper door cover, change the wiring harness from the right

side to the left side, install the wire cover of the upper end cover, and change the upper door and

lower door stop to the left side. (the replacement of upper door and lower door stop is the same as

that of lower door, and the lower left ﬁgure will be changed to right picture)

5.Disas

semble the lower hinge assembly, and then install the leveling foot and screw nut (as

shown in the right ﬁgure).

6.Replace the lower hinge assembly with the leveling angle, and install the lower door.

7.Install the middle hinge at the left mounting position, and install the previously removed screw

cover to the right screw hole.

8.Install the door, connect the terminals, install the upper hinge, the upper hinge cover and the

previously removed screw cover. Reverse door complete. (the upper hinge and hinge cover are

installed on the left as shown in the ﬁgure, and the screw cover is in the right position)

9.After the operation is completed, please stand still for a period of time and turn on the power.

Operation notes

Changing the Light

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its

service agent or similar qualiﬁed person.

1.5W

RB275GM1110

Weight

Dimension

545x615x1825

55

282

80L

54

0.7A

RB275GM1110

41dB

5

Energy consumption E16

Energy consumption E32

0.513kWh/24h

1.059kWh/24h

1.5W

545x615x1825

55

282

80L

54

0.7A

41dB

0.513kWh/24h

RP282BSF0

1.059kWh/24h

RP282BSF0

RB275GM1110

RP282BSF0

■ Veuillez lire attentivement le mode d’emploi avant la mise en marche, et conservez-le bien.

■ Les produits peuvent être sujets à modiﬁcation sans préavis.

Réfrigérateur domestique à 2 portes

Mode d’emploi

TCL Home Appliances (Hefei) Co., Ltd.

Adresse: 10 rue Yunhu, zone de développement économique,

ville de Hefei, province d’Anhui, Chine

FR

La pagina sta caricando ...

TCL RF282BSF0UK Manuale utente

TCL RF282BSF0UK Manuale utente

in altre lingue

Altri documenti