NexiGo N930E Manuale utente

Categoria
Webcam
Tipo
Manuale utente

Questo manuale è adatto anche per

Scan the QR code or visit our link to
download the latest manual here:
nexigo.com/manuals
User Manual
1080p FHD Webcam
N660
CONTENT
CONTENT
English 01
21
Español
33
Italiano
45
Français
57
Deutsch
IMPORTANT SAFETY NOTES
To reduce the risk of fire, electric shock, injury to
persons, and damage to property, read all operating
instructions and the following safety instructions
before using your NexiGo product.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Do not place or attach the webcam to an unstable
or uneven surface. Failure to follow this precaution
may cause the product to fall and cause damage to
the unit.
The webcam may heat up after extended use. If the
camera is hot to the touch, turn off the camera and
leave it to cool down before further use.
Do not use or store the webcam in extremely cold or
hot environments. This may cause the webcam to
malfunction. This item is intended to be used at room
temperature and in a controlled environment.
US 01EN 01
Do not touch the device, power adaptor, or USB
cable with wet hands. Keep this product dry.
Do not exceed the power requirements of this prod.
If the unit is damaged, please exercise the warranty
or recycle the webcam at your nearest electronics
store. Do not attempt to repair, disassemble, or
modify the webcam under any circumstance. Contact
NexiGo Customer Support if there is an issue to
exercise the warranty.
To clean the device, wipe it with a soft, dry cloth. To
clean the lens, use a dry microfiber cloth or a lens
cleaner. Use only a mild detergent if necessary. Do not
use strong or corrosive detergents to avoid damaging
the lens.
Keep ventilation openings free from any
obstructions.
Please protect the USB cable. Do not step on or
apply pressure on them. Do not pull on the product's
plug, socket, or cable outlet.
When not using the webcam, please unplug the
device from the USB port and turned off the power.
US 02EN 02
WELCOME TO THE NEXIGO FAMILY!
CONTACT INFORMATION
Website: www.nexigo.com Manufacturer: Nexight INC
E-mail: [email protected]omTel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
Thank you for choosing the NexiGo N660 FHD Webcam! You
are now part of an exclusive club: the NexiGo family! It's
our job to make sure you enjoy your membership. If you
have any problems please contact us at cs@nexigo.com
anytime for further assistance. Make sure to register your
purchase at nexigo.com/warranty within 14 days of the
delivery date to extend your warranty coverage to TWO
Years!
From all of us here at NexiGo, we want to thank you for
your trust in us. We look forward to serving you again in
the near future.
Yours Sincerely,
The NexiGo Team
US 01EN 03
NEXIGO WEBCAM SETTINGS SOFTWARE
While all of our cameras are plug-and-play, this free
software tool is best for those who want full control
over settings like brightness, saturation, exposure, and
focus. To download the latest version, head to
nexigo.com/software.
nexigo.com/software
US 02EN 04
PRODUCT OVERVIEW
FHD Webcam x 1 User Manual x 1
Privacy Cover x 1
PACKAGE INCLUDES
6
1
2
5
3
4
1. FHD Lens
2. Noise Reduction
Microphone
3. Activity Indicators
4. Privacy Cover
5. 1/4" Tripod Screw Hole
6. Flexible Clip/Base
EN 05
SPECIFICATION
Video
resolution
Application
support
Image sensor
System
requirements
Object distance
1/2.9-inch CMOS digital image sensor
D=110° / H=89° / V=48°
1920x1080@30fps, 1280x720@30fps,
640x480@30fps
19.7 to 118.1 inches
Field of view
• Windows 7 / 8 / 10 / 11 or above
• macOS 10.6 or above
• Chrome OS V29.01547 or above
Chat software: Skype, FaceTime,
Zoom, Microsoft Teams, Hangouts, etc.
Streaming software: Open
Broadcaster Software and Xsplit
Photo or video: Using system Camera
App (Camera for Windows, Photo
Booth for macOS)
EN 06
1. PLACE/POSITION YOUR WEBCAM
2. CONNECT THE WEBCAM TO YOUR COMPUTER
USING THE USB CABLE
Notes:
1. Make sure you are connected to your network before
starting the setup.
2. If you cannot use the camera within other apps, you
will need to enable access.
SETTING UP YOUR WEBCAM
EN 07
• In Windows: Select Settings>Privacy>Camera, turn on
allow apps to access your camera.
• On Mac: Select Apple menu>System Preferences>
Security & Privacy>Privacy>Camera, and select which
apps you want to use the camera. If you still have
trouble connecting the Webcam, please refer to the
FAQ sections starting from Page 13.
Windows users can use the Camera app, which is
pre-installed with Windows. To find the Camera app
type "camera" (without the quotation marks) in the
search bar at the bottom of the screen and press enter.
Alternatively, go to the Start menu at the bottom right
corner of the screen and left click. Scroll through the
list of programs there until you get to the "C" section,
the Camera application will be listed there. To view
your webcam video you may need to select "the
NexiGo camera" from the list of other devices. At the
top right or left of your screen click the cycle camera
icon (the arrow chasing itself, not the gear), and keep
switching until you get to the NexiGo webcam.
3A. VIEW YOUR CAMERA: Windows
EN 08
Mac users can use the Photo Booth app, which is
pre-installed with the OS. This will allow you to preview
the camera images, capture still frames, and record
video clips. To begin, select the Finder button, click
Applications, and select Photo Booth.
3B. VIEW YOUR CAMERA: Mac
EN 09
Alternately, click the Search button in your menu bar,
type "photo booth" (without the quotation marks), and
press return. To see an image from your camera in Photo
Booth, you may need to select the camera from the list
of attached devices in the app. At the top of your screen,
click Camera in the app menu, and select the Full HD
Webcam from the list of options.
1) A computer with speakers (or a headset), your
NexiGo webcam, and a microphone;
2) Install a video-calling application such as Skype,
FaceTime, Zoom, or Hangouts. (Both parties need a
webcam and the same video application.)
4. VIDEO CALLING REQUIREMENTS
EN 10
Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC REQUIREMENT
EN 11
CORRECT DISPOSAL OF THIS PRODUCT (WASTE
ELECTRICAL & ELECTRONIC EQUIPMENT)
WEEE
This marking on the product, accessories or literature
indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should
not be disposed of with other household waste at the
end of their working life. To prevent possible harm to
the environment or human health from uncontrolled
waste disposal, please separate these items from
other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer
where they purchased this product, or their local
government oce, for details of where and how they
can take these items for environmentally safe
recycling.
Business users should contact their supplier and
check the terms and conditions of the purchase
contract. This product and its electronic accessories
should not be mixed with other commercial wastes
for disposal.
(Applicable in countries with separate
collection systems)
EN 12
A: Connect the camera to any USB 2.0 or USB 3.0 port.
It will take a few seconds for the camera to be
recognized after it is connected to the system. To
ensure the camera has been installed correctly on a
Windows computer; check under Control Panel>
System and Security>Device Manager.
Q1: How do I know if my camera is being recognized
by the system?
FAQ
EN 13
To verify the webcam is connected on a Mac computer,
click the Apple Menu (in the top left corner of your
screen) and then click About this Mac. Click on System
Report from the pop-up window that appears. The
System Information window for your Mac will appear.
Navigate to the USB section and check if the webcam
is listed as a connected device (like the photo below):
EN 14
Q2: What is the video recording frame-rate?
A: The NexiGo webcam captures clear images and can
record video at 1080p/30fps in a well-lit environment.
The quality of the signal can be affected by low
bandwidth availability or insucient lighting. This can
cause the frame rate to drop to 1080p/20fps, or
possibly even lower.
Q3: What can I do if the images or video are an
abnormal color? How to adjust image parameters
such as brightness or contrast?
A: Please ensure that the light in your environment is
free of unique tones or intense light sources. Things
such as walls/floors/other large-area non-standard
light sources, including areas with colored or intense
light. In such environments photographed pictures
are subjected to color cast due to the lighting
impact of these light sources.
For Windows & Mac:
Using the NexiGo Webcam Settings Software, you
can adjust the image parameter you want according
to your needs.
Note: Download the NexiGo Webcam Settings
Software from nexigo.com/software.
EN 15
EN 16
Q4: Why is my video not in 1080p in my video calling
application?
A: Check the video output settings in your video
capture software, these may be set to a lower capture
format. There are various constraints on the system
that could impede the ability to attain a 1080p video
calling session. They center around processing power
(i.e. CPU speed) and available network bandwidth. In
all cases, review the requirements from the video
calling application. They will guide as to the system
performance required as well as the necessary
bandwidth.
Q5: How to use the webcam privacy shutter?
Step 1. Attach the cover to the front of the webcam
and press firmly.
EN 17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

NexiGo N930E Manuale utente

Categoria
Webcam
Tipo
Manuale utente
Questo manuale è adatto anche per