Garmin 010-02403-04 Descent MK2S Smartwatch Manuale utente

Descent™ Mk2s

Quick Start Manual 4

Manuel de démarrage rapide 18

Manuale di avvio rapido 36

Schnellstartanleitung 54

Guía de inicio rápido 72

Manual de início rápido 90

Garmin®, the Garmin logo, ANT+®, and QuickFit® are trademarks of Garmin

Ltd. or its subsidiaries, registered in the USA and other countries.

Descent™, Firstbeat Analytics™, and Garmin Dive™ are trademarks of

Garmin Ltd. or its subsidiaries. These trademarks may not be used without

the express permission of Garmin.

The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG,

Inc. and any use of such marks by Garmin is under license. Other

trademarks and trade names are those of their respective owners.

El número de registro COFETEL/IFETEL puede ser revisado en el manual

a través de la siguiente página de internet.

Descent™ Mk2s

Quick Start Manual

Introduction

WARNING

See the Important Safety and

Product Information guide in

the product box for product

warnings and other important

information.

Getting Started

When using your watch the

first time, you should complete

these tasks to set it up and get

to know the basic features.

1Press LIGHT to turn on the

watch (page 5).

2Follow the on-screen

instructions to complete

the initial setup.

During the initial setup, you

can pair your smartphone

with your watch to receive

notifications, sync your

activities, and more

(page 6).

3Charge the device

(page 16).

4Start an activity

(page 12).

4 Quick Start Manual

EN

Buttons

LIGHT

•Press to turn the

backlight on and off.

• Press to turn the

device on.

• Hold to view the

controls menu.

NOTE: While diving, hold

functions are disabled.

UP·MENU

•Press to scroll through

the widget loop and

menus.

• Hold to view the menu.

NOTE: You can enable or

disable this button for dive

activities.

DOWN

•Press to scroll through

the widget loop and

menus.

• Press to scroll through

the data screens

during a dive.

• Hold to view the music

controls from any

screen.

Quick Start Manual 5

EN

NOTE: While diving, hold

functions are disabled.

START·STOP

•Press to view the

activity list and start or

stop an activity.

• Press to choose an

option in a menu.

• Press to view the

menu during a dive.

BACK·LAP

•Press to return to the

previous screen.

• Press to exit a menu

during a dive.

• Press to record a lap,

rest, or transition

during a multisport

activity.

• Hold to view the watch

face from any screen.

• Hold to return to the

primary data screen

during a dive.

: Double tap the device to

scroll through the data

screens during a dive.

Pairing Your Smartphone

To use the connected features

on your watch, you must pair it

directly through the Garmin

Dive™ app, instead of from the

Bluetooth® settings on your

smartphone.

6 Quick Start Manual

EN

1From the app store on your

smartphone, install and

open the Garmin Dive app.

2During the initial setup,

select Yes when you are

prompted to pair with your

smartphone.

3Follow the instructions in

the app to complete the

pairing and setup process.

Using the Watch

• Hold LIGHT to view the

controls menu.

The controls menu

provides quick access to

frequently used functions,

such as turning on do not

disturb mode, saving a

location, and turning the

watch off.

•From the watch face, press

UP or DOWN to scroll

through the widget loop.

Your watch comes

preloaded with widgets

that provide at-a-glance

information. More widgets

are available when you

pair your watch with a

smartphone.

• From the watch face, press

START to start an activity

or open an app

(page 12).

• Hold MENU to customize

the watch face, adjust

Quick Start Manual 7

EN

settings, and pair wireless

sensors.

Diving

Dive Warnings

WARNING

•The diving features of this

device are for use by

certified divers only. This

device should not be used

as a sole dive computer.

Failure to input the

appropriate dive-related

information into the device

can lead to serious

personal injury or death.

• Make sure that you fully

understand the use,

displays, and limitations of

your device. If you have

questions about this

manual or the device,

always resolve any

discrepancies or confusion

before diving with the

device. Always remember

that you are responsible

for your own safety.

•There is always a risk of

decompression sickness

(DCS) for any dive profile

even if you follow the dive

plan provided by the dive

tables or a diving device.

No procedure, diving

device, or dive table will

eliminate the possibility of

DCS or oxygen toxicity. An

8 Quick Start Manual

EN

individual's physiological

make up can vary from day

to day. This device cannot

account for these

variations. You are

strongly advised to remain

well within the limits

provided by this device to

minimize the risk of DCS.

You should consult a

physician regarding your

fitness before diving.

•Perform pre-dive safety

checks, such as checking

proper device function and

settings, display function,

battery level, tank

pressure, and bubble

checks to check hoses for

leaks.

• Do not dive with a gas if

you have not personally

verified its contents and

input the analyzed value to

the device. Failure to verify

tank contents and input the

appropriate gas values to

the device will result in

incorrect dive planning

information and could

result in serious injury or

death.

• Diving with more than one

gas mixture presents a

much greater risk than

diving with a single gas

mixture. Mistakes related

Quick Start Manual 9

EN

to the use of multiple gas

mixtures may lead to

serious injury or death.

•Always ensure a safe

ascent. A rapid ascent

increases the risk of DCS.

• Disabling the deco lockout

feature on the device can

result in an increased risk

of DCS, which can result in

personal injury or death.

Disable this feature at your

own risk.

• Violating a required

decompression stop may

result in serious injury or

death. Never ascend

above the displayed

decompression stop depth.

• Always perform a safety

stop between 3 and 5

meters (9.8 and 16.4 feet)

for 3 minutes, even if no

decompression stop is

required.

Dive Modes

The Descent™ Mk2s device

supports six dive modes. Each

dive mode has four phases:

dive pre-check, surface

display, in-dive, and post-dive.

Single-Gas: This mode allows

you to dive with a single

gas blend. You can set up

to 11 additional gases as

backup gases.

10 Quick Start Manual

EN

Multi-Gas: This mode allows

you to configure multiple

gas blends and switch

gases during your dive.

You can set the oxygen

content from 5–100%. This

mode supports one bottom

gas, and up to 11

additional gases as

decompression or backup

gases.

NOTE: Backup gases are

not used in no-

decompression limit (NDL)

and time to surface (TTS)

decompression

calculations until you

activate them during a

dive.

CCR: This mode for closed-

circuit rebreather (CCR)

diving allows you to

configure two partial

pressure of oxygen (PO2)

setpoints, closed-circuit

(CC) diluent gases, and

open-circuit (OC)

decompression and

backup gases.

Gauge: This mode allows you

to dive with basic bottom

timer features.

NOTE: After diving in

gauge mode, the device

can only be used in gauge

or apnea mode for 24

hours.

Quick Start Manual 11

EN

Apnea: This mode allows you

to free dive with apnea-

specific dive data. This

mode has a higher data

refresh rate.

Apnea Hunt: This mode is

similar to the Apnea dive

mode, but tuned

specifically for

spearfishers. This mode

displays simplified in-dive

data, and disables start

and stop tones.

Dive Setup

You can customize the dive

settings based on your needs.

Not all settings are applicable

for all dive modes. You can

also edit the settings before

you start a dive.

Hold MENU, and select Dive

Setup.

See the owner's manual for

more information.

Starting a Dive

1From the watch face, press

START.

2Select a dive mode

(page 10).

3If necessary, press DOWN

to edit the dive settings,

such as the gases, water

type, and alerts.

4Wait with your wrist out of

the water until the device

acquires GPS signals and

12 Quick Start Manual

EN

the status bar turns green

(optional).

The device requires GPS

signals to save your dive

entry location.

5Press START until the

primary dive data screen

appears.

6Descend to start your dive.

The activity timer starts

automatically when you

reach a depth of 1.2 m (4

ft.).

7Select an option:

•Press DOWN to scroll

through the data

screens and dive

compass.

• Press START to view

the in-dive menu.

When you ascend to 1 m (3.3

ft.), the End Dive Delay timer

begins counting down. When

the timer elapses, the device

automatically ends and saves

the dive. You should keep your

wrist out of the water while the

device saves your dive exit

location.

Viewing the Surface

Interval Widget

The widget displays your

surface interval time, tissue

load, and central nervous

system (CNS) oxygen toxicity

percentage.

Quick Start Manual 13

EN

1From the watch face, press

UP or DOWN to view the

surface interval widget.

2Press START to view your

oxygen toxicity units (OTU)

and CNS percentage.

NOTE: The OTU

accumulated during a dive

expire after 24 hours.

3Press DOWN to view your

tissue load details.

Viewing the Dive Log

Widget

The widget displays

summaries of your recently

recorded dives.

1From the watch face, press

UP or DOWN to view the

dive log widget.

2Press START to view your

most recent dive.

3Select an option:

•Press START to view

more details.

• Press DOWN >

START to view a

different dive.

Device Information

Wearing the Device

• Wear the device above

your wrist bone.

NOTE: The device should

be snug but comfortable.

14 Quick Start Manual

EN

For more accurate heart

rate readings, the device

should not move while

running or exercising. For

pulse oximeter readings,

you should remain

motionless.

NOTE: While diving, the

device should stay in

contact with your skin, and

it should not bump into

other wrist-worn devices.

NOTE: The optical sensor

is located on the back of

the device.

•See the owner's manual

for more information.

Changing the QuickFit®

Bands

Extra Long Diving Band

Your device comes with an

extra long band you can wear

over a thick exposure suit.

Quick Start Manual 15

EN

Charging the Device

WARNING

This device contains a lithium-

ion battery. See the Important

Safety and Product Information

guide in the product box for

product warnings and other

important information.

NOTICE

To prevent corrosion,

thoroughly clean and dry the

contacts and the surrounding

area before charging or

connecting to a computer.

Refer to the cleaning

instructions in the owner's

manual.

1Pinch the sides of the

charging clip.

2Align the clip with the

contacts on the back of the

device, and release the

clip.

3Plug the USB cable into a

USB charging port.

Specifications

Operating temperature

range: From -20º to 60ºC

(from -4º to 140ºF)

16 Quick Start Manual

EN

Underwater operating

temperature range: From

0º to 40ºC (from 32º to

104ºF)

Charging temperature range:

From 0º to 45ºC (from 32º

to 113ºF)

Wireless frequency: 2.4 GHz

@ 10.8 dBm maximum

Depth sensor: Accurate from

0 m to 100 m (0 ft. to 328

ft.) complying with EN

13319

Resolution (m): 0.1 m until

99.9 m, 1 m at 100 m and

deeper

Resolution (ft.): 1 ft.

Inspection interval: Inspect

parts before each use for

damage. Replace parts as

needed.1

Troubleshooting

Restarting Your Device

1Hold LIGHT until the

device turns off.

2Hold LIGHT to turn on the

device.

Getting the Owner's

Manual

The owner's manual includes

instructions for using device

1 Aside from normal wear and tear,

performance is not affected by

aging.

Quick Start Manual 17

EN

features and accessing

regulatory information.

Go to garmin.com

/manuals/DescentMk2.

Descent™ Mk2s

Manuel de démarrage

rapide

Introduction

AVERTISSEMENT

Consultez le guide

Informations importantes sur le

produit et la sécurité inclus

dans l'emballage du produit

pour prendre connaissance

des avertissements et autres

informations importantes sur le

produit.

Mise en route

Lors de la première utilisation

de la montre, vous devrez

effectuer les opérations

suivantes pour la configurer et

vous familiariser avec les

fonctions de base.

1Appuyez sur le bouton

LIGHT pour allumer la

montre (page 19).

2Suivez les instructions à

l'écran pour procéder au

réglage initial.

Pendant la phase de

configuration initiale, vous

pouvez coupler votre

smartphone avec votre

montre pour recevoir des

18 Manuel de démarrage rapide

FR

notifications, synchroniser

vos activités et bien plus

encore (page 21).

3Chargez l'appareil

(page 33).

4Démarrez une activité

(page 29).

Boutons

LIGHT

•appuyez sur ce bouton

pour activer et

désactiver le

rétroéclairage.

•Appuyez sur ce bouton

pour allumer l'appareil.

• Maintenez ce bouton

enfoncé pour afficher

le menu des

commandes.

REMARQUE : pendant la

plongée, les fonctions de

maintien sont désactivées.

UP·MENU

•appuyez sur ce bouton

pour faire défiler les

pages de widgets et

les menus.

Manuel de démarrage rapide 19

FR

• Maintenez ce bouton

enfoncé pour afficher

le menu.

REMARQUE : vous

pouvez activer ou

désactiver ce bouton pour

les activités de plongée.

DOWN

•appuyez sur ce bouton

pour faire défiler les

pages de widgets et

les menus.

• Appuyez sur ce bouton

pour faire défiler les

écrans de données

lors d'une plongée.

• Maintenez ce bouton

enfoncé pour afficher

les commandes de la

musique à partir de

n'importe quel écran.

REMARQUE : pendant la

plongée, les fonctions de

maintien sont désactivées.

START·STOP

•appuyez pour afficher

la liste des activités et

démarrer ou arrêter

une activité.

• Appuyez pour choisir

une option d'un menu.

• Appuyez pour afficher

le menu pendant une

plongée.

20 Manuel de démarrage rapide

FR

La pagina sta caricando ...

Garmin 010-02403-04 Descent MK2S Smartwatch Manuale utente

Garmin 010-02403-04 Descent MK2S Smartwatch Manuale utente

in altre lingue

Documenti correlati

Altri documenti