V TAC V-TAC VT-5158 Outdoor WiFi Camera Manuale utente

Categoria
Server / codificatori video
Tipo
Manuale utente
WEEE Number: 80133970
INSTALLATION INSTRUCTION
Multi-Language
Manual - QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep this
manual handy for future reference. If you have any another query, please contact
our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best.
This marking indicates that
this product should not be
disposed of with other
household wastes.
ENGLISH
OUTDOOR WIFI CAMERA
[VT-5158]
INSTALLATION DIAGRAM
PACKAGING CONTENTS
ENGLISH
SCREW NUTS
(3PCS)
ADAPTER
(1PC) FITTING
(1PC)
SCREWS
(3PCS) STEEL PIN
(1PC)
CAMERA
(1PC)
MAIN FUNCTION
TECHNICAL DATA
DOWNLOAD THE APP
• Google Play Store - Search “YCC365 Plus”
• IOS (Apple Store) - Search “YCC365 Plus”
• Android phones and IOS(Iphone) can
download by scanning the following QR codes.
ENGLISH
• 10 meters Night Vision
• 25–30fps Frame Rate
• Two way Audio
• Wireless Security: WEP/WPA-PSK/W
-
PA2-PSK data encryption
• Micro SD up to 128gb Storage
• Lan port RJ-45
• IEEE802.11b/g/n Wireless LAN
• IP Rating: IP65
• DC:12V±5% Input Power
• Auto tracking
• Motion & Sound Detection
• 2.4~2.4835 Ghz Wireless Frequency
• 220°/ 90° Pan/Tilt
• 2304x1296P Resolution
• 3.0M pixel HD CMOS Image Sensor
• 3.6mm Lens
• H.265/Mjpeg Video Compression
• Protocol: TCP, UDP, DHCP, DNS, RTSP,
P2P
FIGURE 1 FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 6FIGURE 5
REGISTER NEW ACCOUNT
LOGIN USING EMAIL
1. Tap on “Sign Up” to register with your email address as user ID and tap on
Next” to create a password.
2. Tap on “Next” - The APP will send a confirmation link to your email ID. Please
confirm the link to complete the registarion process.
LOGIN USING PHONE NO.
1. Tap on “Login in with mobile phone number” (fig 1) to change the login panel
2. Tap on “Sign Up” to register with your phone number as user ID and tap on
Next” - The APP will send a SMS verification code to your mobile phone. Please
input the SMS verification code in the APP to complete the registarion process.
3. Tap on “Next” to create a password.
ENGLISH
FIGURE 7 FIGURE 8 FIGURE 9
ADDING CAMERA DEVICE TO THE APP
TIP: First, connect the power adapter to the camera, then the camera will sound
"Please configure camera by AP hotspot or by scanning code" then using the YCC365
Plus APP start adding the camera to the APP. If you do not hear the sound, press and
hold the "RESET" button on the device until you hear the sound "Reset Success". Please
wait until you hear the sound "Please configure camera by AP hotspot or by scanning
code"
NOTE: The camera only supports 2.4G Wi-Fi, before adding devices, make sure your
router is 2.4G Wi-Fi, and your phone is connected to 2.4G Wi-Fi.
Add Camera
Add camera Tap on top right corner “+” sign as shown below (figure 7)
Tap on “Smart Camera” as shown below(Figure 8)
There are three ways for adding the camera: (a) Device adding by scanning code (b)
Addition of AP hotspot (c) Addition by connecting to network cable(This feature is not
available for this camera) (Refer to Figure 9)
ENGLISH
FIGURE 10 FIGURE 11
A. DEVICE ADDING BY SCANNING THE CODE
• Tap on “device adding by scanning the code” (Ref Figure 9).
• Please refer to "TIP" before tapping on Next.
After you hear the sound from camera "Please configure camera by AP hotspot or by
scanning code" tap on Next (Figure 10)
• Enter your Wi-Fi Name and Password.
• Now if your mobile phone is already connected to network Wi-Fi, it will show your
network Wi-Fi name. If not, press “Switch the network” to open your phone’s WLAN
and connect to your available network. Then go back to the app. Input Wi-Fi pass-
word (note: this password must be your network Wi-Fi password), and then click
“Next”. A QR code will show on phone screen.
• Place the QR code towards the camera lens at a distance of around 4-8 inches.
After the camera reads the QR, it will sound with “two beeps” and Wi-Fi connecting.
Now on the App, tap on “Beep or flashing lights” (Figure 12). Then wait till the
camera confirms with “Internet connected” “welcome to use cloud camera”. On app it
will also show “Addition is successful”- Select/type the device name (Figure 15) and
tap on “Start to experience”.
FIGURE 12
ENGLISH
B. ADDITION OF AP HOTSPOT
• Tap on “addition of AP Hotspot” (Ref Figure 9).
• Please refer to "TIP" before tapping on "Go to setting".
After you hear the sound from camera "Please configure camera by AP hotspot or by
scanning code" tap on "Go to setting" (Figure 10)
• Tap on “Go to Setting" (Figure 16) button then Select the camera hotspot named with
“CLOUDCAM_XXXX” (Figure 17). After connecting the camera then go back to the app and
Tap on “Next” (Figure 18).
FIGURE 14 FIGURE 15
FIGURE 16 FIGURE 18
FIGURE 17
FIGURE 13
ENGLISH
• Connect the Ethernet cable between
camera and Wi-Fi router.
• Tap on “Addition by connecting to
network cable” (Ref Figure 9).
• Please scan the QR code on the
device and wait for the network
connection to succeed.
FIGURE 19
FIGURE 21
FIGURE 20 [A] FIGURE 20 [B]
C. ADDITION BY CONNECTING TO
NETWORK CABLE
(ONLY SUPPORT LAN PORT DEVICE)
• Select your network Wi-Fi and input Wi-Fi password (note: this password must be your
network Wi-Fi password). Then Tap “confirm” [Figure 19], the camera will sound with two
beeps and voice “Network is connecting, please wait”. Then wait till the camera confirms with
“Internet connected welcome to use cloud camera”. On app it will also show “Addition is
successful”- Select/type the device name (Figure 20 [B]) and tap on “Start to experience".
ENGLISH
FIGURE 22 [A] FIGURE 22 [B] FIGURE 22 [C] FIGURE 22 [D]
FIGURE 22 [F]FIGURE 22 [E] FIGURE 22 [G] FIGURE 22 [H]
D. AP DIRECT MODE (SPECIAL)
• Open the YCC365 plus APP to enter the login interface. Tap on "Local direct connection" as
shown in Figure 22[A]
• Tap on plus sign on the top right hand corner as shown in Figure 22[B].
• Power up the camera and wait until you hear the voice "Please configure camera by AP
hotspot or scanning code" and Tap on "Next" as shown in Figure 22[C] (if you don't hear the
voice, reset the camera
• Tap on "Go to setting" as shown in Figure 22[D] and connect the camera hotspot named
with “CLOUDCAM_XXXX" as shown in Figure 22[E]. After connecting the camera go back to
the APP and tap on "Next" as shown in Figure 22[F]. If unsure please refer to Figure 22[D]
and tap on "How to connect the device".
• Enter the User name: admin | Password: 12345 and tap on “Next”, as shown in Figure
22[G].
• On app it will also show “Addition is successful”- Select/type the device name (Figure
22[H]) and tap on “Start to experience"
ENGLISH
8
FUNCTION INTRODUCTION
Real-time preview interface
FIGURE 23
ENGLISH
A: Settings Menu
B: Video
C: Snapshot
D: Full Screen
E: Pan-tilt reset
F: Preset
G: Pan&Tilt
H: Message
I: Video quality
J: Hold to talk
K: Sound
L: More
Control white light.
View cloud albums.
Video to the phone.
8
1. Click the preset icon to enter the preset management interface (Figure 24).
2. Adding presets. Refer Figure 25.
3. Delete the preset: Click the edit icon to delete the preset that has been added.
ADD THE PRESET
DELETE THE PRESET
By sliding steering wheel or sliding the screen on the live preview you can
control the camera's rotation.
FIGURE 25
FIGURE 26
FIGURE 24
PTZ
PRESET
ENGLISH
8
FIGURE 27 FIGURE 28
VIDEO PLAYBACK
VIDEO CLIP
Note: Video playback by default is cloud recording, if you want to playback the
video on the TF card, you can switch “play videos from” to “SD card”.
Cloud video has color variations, dark blue indicates the alarm recording and
light blue indicates non-alarm recording. TF card video color is uniform light blue.
Click the date icon to playback the video of the selected date.
Click “ ” icon to adjust the cloud video playback speed, please note the TF card
playback does not support this function.
Note: Only the cameras with cloud service package have this feature.
Drag the playback cursor and click the clip icon, select start time and click “save to
the cloud album ” , enter the video name and click “save”.
Click “ ” icon to adjust the cloud video playback speed, please note the TF card
Lorem ipsum
Lorem ipsum
ENGLISH
8
Click the cloud album icon and click the video clip, click “Download” to save the
video to your phone or click “Share” to share your Video on Facebook and
YouTube.
Click “Cloud event” to
view the alarm video
DOWNLOAD CLOUD VIDEO / SHARE CLOUD VIDEO
CLOUD VIDEO
PLAYBACK
FIGURE 29 FIGURE 30
FIGURE 31 FIGURE 32
ENGLISH
8
ENGLISH
Click “ “ in the preview screen, check the settings menu
PREFERENCES
FIGURE 33
Turn ON the Alarm Tone [Go to Settings Menu > Tap on Alarm Tone]:
When detected moving object, camera will make an alarming sound, it will
last 30 seconds by default, if it is triggered continuously in 30 seconds, the
alarm sound will prolong. If this machine supports humanoid detection, the
alarm sound will be triggered only when human’s movements are detected.
Turn OFF the Alarm Tone:
There is no alarm sound even when it detected the moving objects
8
ENGLISH
ALARM TONE FUNCTIONALITY
Switch of the infrared light corresponding to the night vision off APP
Turn ON the night vision [Go to Settings Menu > Tap on Night Vision]: Infra-
red light turns on - the picture is black and white.
Turn OFF the night vision [Go to Settings Menu > Tap on Night Vision]:
Infrared light turns off, the picture is colorful.
Automatic night vision: Switch infrared lights automatically according to the
photosensitive reaction, the color of the picture also depends on the photo-
sensitive reaction.
CONTROL OF NIGHT VISION
White light switch corresponding to the light bulb icon (Figure 23). In case of
automatic night vision, open the white light by tapping on the bulb icon
(Figure 23), it is bright and the picture is colorful. In the case of automatic
night vision, close the white light by tapping on the bulb icon, it goes off and
the picture's color depends on the photosensitive reaction. In the case of
automatic night vision, Set the white light of automatic, it won’t trigger the
white light in the daytime, when moving objects detected at night, the white
light will open automatically. It will last 60 seconds when triggered one time,
if there are no moving objects, it will close after 60 seconds. The white light
time will prolong if there are moving objects during the 60 seconds.
CONTROL OF WHITE LIGHT
8
We offer 30-day-long cloud service, everyone can enjoy the cloud storage service
for free, after that you can choose to pay for the service with a low cost.
ASelect “Cloud service” and check Subscription packages
BThere are three kinds of subscription packages for you, you can choose to pay
for this service by monthly or yearly.
CWe support PayPal payment system, click “Go to PayPal now” and then
complete the payment ( please install PayPal app in advance )
CLOUD STORAGE SERVICE
SET TF CARD RECORDING MODE
Insert the TF card into the card slot and power on the camera. (Ensure to install
the TF card only when the camera is powered OFF).
TF card requirements
1Memory space 8-128G
2C10 TF card
3Use after formatting.
4Recommend Kingston/SanDisk/Samsung
Click “Device storage” to check it
Click “Memory card recording mode” to select the video mode of TF card.
FIGURE 34
ENGLISH
8
1. Unable to add the device?
A. Please make sure the camera has been reset. Press the Reset button until you
hear the prompt tone.
B. Camera supports Only 2.4GHZ Wi-Fi, if your Wi-Fi router is 5GHZ, please switch
to 2.4/5GHZ dual mode.
C. Please turn on the GPS service before adding the device on the Android/IOS
mobile phone. After installation is complete, you will be asked to turn on GPS
service when you use the app for the first time, if you have chosen not to turn ON
the GPS service please uninstall the APP and reinstall again and ensure to enable
the GPS service.
D. Please ensure the camera was not linked to any other account. If it was then
please reset the device and add to your account.
FIGURE 35
Log In: www.ucloudcam.com
Enter your account number and password,click to Login
HOW TO USE THE CAMERA ON A COMPUTER
FREQUENTLY ASKED QUESTIONS
1. Applicable only for multiple cameras under
the same account.
2. Click on the split screen button to
simultaneously preview multiple devices.
Note: To use this feature you must have 2 or
more cameras installed under the same account.
SPLIT SCREEN FEATURE
FIGURE 36
ENGLISH
8
There are four voice prompts in the progress
(1) “Please configure camera by AP hotspot or scanning code”
(2) Select your Wi-Fi and login with your password, after the device makes a noise
like “beep” you will hear this “Please wait for Wi-Fi connecting”.
(3)“Please wait for internet connecting” after getting the Internet IP address.
(4)“Internet connected welcome to use cloud camera”
A. If you cannot go to the second step, please ensure your Wi-Fi channel is not
hidden, and the Wi-Fi router is not placed far from the camera. If this way doesn’t
work, please scan the QR code to add the camera.
B. If you cannot go to the third step, please reduce the number of the Wi-Fi users,
and delete the special characters of your Wi-Fi password.
C. If you cannot go to the fourth step, please repeat the entire process again, if it
still doesn’t work, please contact the seller.
2. Why does the video recording split into multiple videos?
The size of the video file is limited. Once the video size reaches its limit, the video
file will be created and the next video will continue to be recorded.
3. The TF card can’t be identified?
Please check the TF card if it meets the quality requirements. When the Wi-Fi
signal is not good, the TF Card will not be identified.
4. The video recording timeline is blank after the cloud service expired?
The video cannot be replayed after cloud service is expired, if there is no TF card
in the camera, the video cannot be recorded.
If the TF card is always working, but the video files disappear, please check the TF
card state, if it is normal in the App but no video has been recorded, please format
the TF card. If it still doesn’t work, please get a new TF card and try again.
5. Why can't I get notifications on my phone?
Make sure the APP notification is enabled in the phone settings, when you are
watching the real-time video in the App, there is no warning notifications, because
it’s unnecessary to send notifications when you are watching the video online.
Advanced message push system, the warning notifications won’t be notified to
your phone all the time but it will record all the messages and videos.
6. Camera disconnected?
Please check the power and the Internet then restart the camera. If this way does
not work please remove the camera and add it again in the App.
7. Circle in the video, video is running slowly?
Circle in the video means it’s still loading, please check your network environment.
8. How can I give access to other people to watch the video?
Share the App account with the other people.
9. How many people can use the account simultaneously?
There is no theoretical limit.
10. Why adding camera to another account would fail?
One camera one account, if the other account needs to be added with the camera,
please remove the camera from the current account and add it to the new account.
ENGLISH
8
11. How can I get my camera connected to the other Wi-Fi?
Two ways:
A When you need to change to another Wi-Fi without moving the place.
Setting Menu >> Wi-Fi Network >> select the Wi-Fi
B: When the camera is moved to another place, please start the camera, you will
see the “Device disconnected” on the main page, and then click “TROUBLESHOOT”
to connect to the Wi-Fi again.
ENGLISH
WEEE Number: 80133970
ISTRUZIONI PER L'INSTALLAZIONE
Manuale multi-
lingue - QR CODE
Eseguire la scansione del
codice QR per accedere
al manuale in più lingue.
INTRODUZIONE
Grazie per aver scelto e acquistato il prodotto della V-TAC. La V-TAC Le servirà nel
miglior modo possibile. Si prega di leggere attentamente queste istruzioni prima di
iniziare l’installazione e di conservare questo manuale a portata di mano per riferi-
menti futuri. In caso di qualunque altra domanda si prega di contattare il nostro
rivenditore o il distributore locale da chi è stato acquistato il prodotto. Loro sono
addestrati e pronti a servirla nel miglior modo possibile.
Questo marchio indica che
questo prodotto non deve
essere smaltito con altri
rifiuti domestici.
ITALIAN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

V TAC V-TAC VT-5158 Outdoor WiFi Camera Manuale utente

Categoria
Server / codificatori video
Tipo
Manuale utente