Sony CCD-TRV608 Manuale utente

Model No. CCD-TRV Model No. AC-

Serial No. Serial No.

Operating Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Record the

serial number in the space provided below. Refer to these numbers

whenever you call upon your Sony dealer regarding this product.

3-072-314-13 (1)

CCD-TRV608

CCD-TRV107/TRV108/TRV308/

TRV408/TRV608

Video Camera

Recorder

2

Welcome!

Congratulations on your purchase of this Sony Handycam Vision

TM

. With your Handycam

Vision

TM

, you can capture life’s precious moments with superior picture and sound quality.

Your Handycam Vision

TM

is loaded with advanced features, but at the same time it is very

easy to use. You will soon be producing home video that you can enjoy for years to come.

WARNING

To prevent fire or shock hazard, do

not expose the unit to rain or

moisture.

For the customers in the

U.S.A. and Canada

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Never expose the battery pack to temperatures

above 60°C (140°F) such as in a car parked in

the sun or under direct sunlight.

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are

recyclable.

You can help preserve our

environment by returning

your used rechargeable

batteries to the collection and

recycling location nearest you.

For more information regarding recycling of

rechargeable batteries, call toll free

1-800-822-8837, or visit http://www.rbrc.org/.

Caution: Do not handle damaged or leaking

Lithium-Ion batteries.

3

For the customers in the U.S.A.

If you have any questions about this product, you

may call:

Sony Customer Information Center 1-800-222-SONY

(7669).

The number below is for the FCC related matters

only.

Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: CCD-TRV608

Responsible Party: Sony Electronics lnc.

Address: 680 Kinderkamack Road,

Oradell, NJ 07649 U.S.A.

Telephone No.: 201-930-6972

This device complies with Part15 of the FCC

Rules. Operation is subject to the following two

conditions.: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired operation.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void

your authority to operate this equipment.

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

— Consult the dealer or an experienced radio/TV

technician for help.

The supplied interface cable must be used with the

equipment in order to comply with the limits for a

digital device pursuant to Subpart B of Part 15 of FCC

Rules.

For the customers in CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

4

Main Features

Taking moving images, and playing them back

•Recording a picture (p. 19)

•Playing back a tape (p. 29)

Capturing images on your computer*

1)

•Viewing images recorded on a tape (p. 59)

•Viewing images live from your camcorder (p. 59)

Others

Functions to adjust exposure in the recording mode

•BACK LIGHT (p. 25)

•NightShot (p. 26)

•PROGRAM AE (p. 38)

•Built-in light*

2)

(p. 46)

•Manual exposure (p. 40)

Functions to give images more impact

•Digital zoom (p. 22)

The default setting is set to OFF. (To zoom greater than 20×, select the digital zoom

power in D ZOOM in the menu settings.)

•FADER (p. 35)

•Picture effect (p. 37)

•TITLE (p. 42)

Function to give a natural appearance to your recordings

•Manual focus (p. 41)

Functions to use in editing in the recording mode

•Wide mode (p. 33)

•Date and time (p. 16)

•ORC [MENU] (p. 70)

Function to use after recording

•Easy Dubbing (p. 51)

Function to make transition smooth

•END SEARCH (P.28)

*

1)

CCD-TRV608 only

*

2)

CCD-TRV107/TRV308/TRV408/TRV608 only

5

Table of contents

Main Features .......................................... 4

Quick Start Guide............................. 6

Getting started

Using this manual ................................... 8

Checking supplied accessories............ 10

Step 1 Preparing the power supply... 11

Installing the battery pack ............ 11

Charging the battery pack............. 12

Connecting to a wall outlet ........... 15

Step 2 Setting the date and time ........ 16

Step 3 Inserting a cassette ................... 18

Recording – Basics

Recording a picture............................... 19

Shooting backlit subjects

– BACK LIGHT ........................ 25

Shooting in the dark

– NightShot ............................... 26

Superimposing the date and time

on pictures ................................ 27

Checking the recording

– END SEARCH ............................. 28

Playback – Basics

Playing back a tape ............................... 29

Viewing the recording on TV.............. 32

Advanced Recording

Operations

Using the wide mode ........................... 33

Using the fader function ...................... 35

Using special effects – Picture effect .. 37

Using the PROGRAM AE function .... 38

Adjusting the exposure manually ...... 40

Focusing manually................................ 41

Superimposing a title ........................... 42

Making your own titles ........................ 44

Using the built-in light

(CCD-TRV107/TRV308/TRV408/

TRV608 only) .................................. 46

Editing

Dubbing a tape ...................................... 49

Dubbing a tape easily

– Easy dubbing ............................... 51

PC Connection (CCD-TRV608

only)

Viewing images using your computer

– USB Streaming

(Windows users only)................. 59

Customizing Your Camcorder

Changing the menu settings................ 67

Troubleshooting

Types of trouble

and their solutions.......................... 73

Self-diagnosis display........................... 77

Warning indicators and messages...... 78

Additional Information

About video cassettes ........................... 80

About the “InfoLITHIUM”

battery pack..................................... 81

Using your camcorder abroad ............ 83

Maintenance information and

precautions ...................................... 84

Specifications ......................................... 89

Quick Reference

Identifying the parts and controls ...... 91

Index ....................................................... 98

Quick Start Guide

6

Quick Start Guide

This chapter introduces you to the basic features of your

camcorder. See the page in parentheses “( )” for more

information.

Open the DC IN

jack cover.

Connect the plug with

its v mark facing up.

Inserting a cassette (p. 18)

Connecting the power cord (p. 15)

Use the battery pack when using your camcorder outdoors (p. 11).

3Close the cassette

compartment by

pressing the

mark

on the cassette

compartment. The

cassette compartment

automatically goes

down.

Close the lid of the

cassette compartment.

1Open the lid of the

cassette compartment,

and press Z EJECT.

The cassette

compartment opens

automatically.

2Insert a cassette

into the cassette

compartment

with its window

facing out and the

write-protect tab

on the cassette up.

AC power adaptor (supplied)

EJECT

Quick Start Guide

7

Monitoring the playback picture on the LCD

screen (p. 29)

2Press m to rewind the tape.

3Press N to start playback.

Note

Do not pick up your camcorder by

the viewfinder, the LCD panel, or

the battery pack.

3Open the LCD panel

while pressing OPEN.

The picture appears

on the LCD screen.

2Set the POWER

switch to CAMERA

while pressing the

small green button.

4Press START/STOP.

Your camcorder

starts recording. To

stop recording, press

START/STOP again.

1Remove the lens cap.

Viewfinder

When the LCD panel is closed, use the

viewfinder placing your eye against its eyecup.

The picture in the viewfinder is black and white.

Adjust the viewfinder lens to your eyesight (p. 23).

When you purchase your camcorder, the clock setting is set to off. If you want to

record the date and time for a picture, set the clock setting before recording (p. 16).

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

POW

ER

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

PO

W

ER

REW

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

P

O

W

E

R

1Set the POWER

switch to PLAYER

while pressing the

small green button.

Recording a picture (p. 19)

PLAY

8

— Getting started —

Using this manual

The instructions in this manual are for the five models listed in the table below. Before

you start reading this manual and operating your camcorder, check the model number

by looking at the bottom of your camcorder. The CCD-TRV608 is the model used for

illustration purposes. Otherwise, the model name is indicated in the illustrations. Any

differences in operation are clearly indicated in the text, for example, “CCD-TRV608

only.”

As you read through this manual, buttons and settings on your camcorder are shown in

capital letters.

e.g. Set the POWER switch to CAMERA.

When you carry out an operation, you can hear a beep sound to indicate that the

operation is being carried out.

Types of differences

CCD-

TRV107 TRV108 TRV308 TRV408 TRV608

Digital Zoom 450× 460× 460× 560× 560×

LCD Screen 6.2 cm 6.2 cm 6.2 cm 6.2 cm 7.5 cm

(2.5 type) (2.5 type) (2.5 type) (2.5 type) (3 type)

Built-in light z — zzz

Remote sensor z ——z —

SteadyShot — — zzz

USB Streaming — — — — z

VF B.L. (Viewfinder backlight) z — zzz

z Provided

— Not provided

Getting started

9

Using this manual

Note on TV color systems

TV color systems differ from country to country. To view your recordings on a TV, you

need an NTSC system-based TV.

Precautions on camcorder care

Lens and LCD screen/finder (on mounted models only)

•The LCD screen and the finder are manufactured using extremely high-precision

technology so over 99.99% of the pixels are operational for effective use.

However, there may be some tiny black points and/or bright points (white, red,

blue or green in color) that constantly appear on the LCD screen and the finder.

These points are normal in the manufacturing process and do not affect the

recording in any way.

•Do not let your camcorder get wet. Keep your camcorder away from rain and sea

water. Letting your camcorder get wet may cause your camcorder to malfunction.

Sometimes this malfunction cannot be repaired [a].

•Never leave your camcorder exposed to temperatures above 60°C (140°F), such as in a

car parked in the sun or under direct sunlight [b].

•Be careful when placing the camera near a window or outdoors. Exposing the LCD

screen, the finder or the lens to direct sunlight for long periods may cause

malfunctions [c].

•Do not directly shoot the sun. Doing so might cause your camcorder to malfunction.

Take pictures of the sun in low light conditions such as dusk [d].

[a] [b]

[c] [d]

10

Checking supplied accessories

Make sure that the following accessories are supplied with your camcorder.

1 Wireless Remote Commander (CCD-

TRV107/TRV408 only) (1) (p. 96)

2 AC-L10A/L10B/L10C AC power

adaptor (1), Power cord (1) (p. 15)

3 NP-FM30 battery pack (1) (p. 11, 12)

4 Size AA (R6) battery for Remote

Commander (CCD-TRV107/TRV408

only) (2) (p. 96)

Contents of the recording cannot be compensated if recording or playback is not

made due to a malfunction of the camcorder, storage media, etc.

5 A/V connecting cable (1) (p. 32)

6 Shoulder strap (1) (p. 91)

7 Lens cap (1) (p. 19, 95)

8 USB Cable (CCD-TRV608 only) (1)

(p. 59)

9 CD-ROM (SPVD-008 USB Driver)

(CCD-TRV608 only) (1) (p. 60)

1

2

4

56

8

9

3

7

11

Getting started

Installing the battery pack

Slide the battery pack down until it clicks.

To remove the battery pack

Slide the battery pack out in the direction of the arrow while pressing V BATT down.

Step 1 Preparing the power supply

V BATT release lever

12

Step 1 Preparing the power supply

Charging the battery pack

Use the battery pack after charging it for your camcorder.

Your camcorder operates only with the “InfoLITHIUM” battery pack (M series).

See page 81 for details of the “InfoLITHIUM” battery pack.

(1) Open the DC IN jack cover and connect the AC power adaptor supplied with

your camcorder to the DC IN jack with the plug’s v mark facing up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

(4) Set the POWER switch to OFF (CHG). Charging begins. The remaining battery

time is indicated in minutes on the display window.

When the remaining battery indicator changes to , normal charge is completed. To

fully charge the battery (full charge), leave the battery pack attached for about one hour

after normal charge is completed until “FULL” appears in the display window. Fully

charging the battery allows you to use the battery longer than usual.

4

2,3

1

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

POWER

FULL

The number in the illustration of the display window may differ from that on your

camcorder.

After charging the battery pack

Disconnect the AC power adaptor from the DC IN jack on your camcorder.

13

Getting started

Step 1 Preparing the power supply

Note

Prevent metallic objects from coming into contact with the metal parts of the DC plug of

the AC power adaptor. This may cause a short-circuit, damaging the AC power

adaptor.

Remaining battery time indicator

The remaining battery time you record with the viewfinder is displayed.

The remaining battery time indicator in the display window roughly indicates the

recording time with the viewfinder.

Until your camcorder calculates the actual remaining battery time

“– – – – min” appears in the display window.

While charging the battery pack, no indicator appears or the indicator flashes in

the display window in the following cases:

– The AC power adaptor is disconnected.

– The battery pack is not installed properly.

– Something is wrong with the battery pack.

We recommend charging the battery pack in an ambient temperature of between

10°C to 30°C (50°F to 86°F).

If the power goes off although the battery remaining indicator indicates that the

battery pack has enough power to operate

Charge the battery pack fully again so that the indication on the battery remaining

indicator is correct.

Charging time

Battery pack Full charge (normal charge)

NP-FM30 (supplied) 145 (85)

NP-FM50 150 (90)

NP-FM70 240 (180)

NP-QM71 260 (200)

NP-FM90 330 (270)

NP-FM91/QM91 360 (300)

Approximate number of minutes to charge an empty battery pack at 25°C (77°F)

Recording time

CCD-TRV107/TRV108/TRV308/TRV408

Recording with Recording with

Battery pack the viewfinder the LCD screen

Continuous* Typical** Continuous* Typical**

NP-FM30 (supplied) 165 90 120 65

NP-FM50 265 145 195 105

NP-FM70 540 295 400 220

NP-QM71 640 350 465 255

NP-FM90 820 450 600 330

NP-FM91/QM91 955 525 695 380

14

CCD-TRV608

Recording with Recording with

Battery pack the viewfinder the LCD screen

Continuous* Typical** Continuous* Typical**

NP-FM30 (supplied) 165 90 100 55

NP-FM50 265 145 160 90

NP-FM70 540 295 335 185

NP-QM71 640 350 390 215

NP-FM90 820 450 505 275

NP-FM91/QM91 955 525 585 320

Approximate number of minutes when you use a fully charged battery pack

* Approximate continuous recording time at 25°C (77°F). The battery life will be

shorter if you use your camcorder in a cold environment.

** Approximate number of minutes when recording while you repeat recording start/

stop, zooming and turning the power on/off. The actual battery life may be shorter.

Playing time

CCD-TRV107/TRV108/TRV308/TRV408

Battery pack

Playing time Playing time

on LCD screen with LCD closed

NP-FM30 (supplied) 120 175

NP-FM50 195 280

NP-FM70 400 570

NP-QM71 465 675

NP-FM90 600 865

NP-FM91/QM91 695 1010

CCD-TRV608

Battery pack

Playing time Playing time

on LCD screen with LCD closed

NP-FM30 (supplied) 100 175

NP-FM50 160 280

NP-FM70 335 570

NP-QM71 390 675

NP-FM90 505 865

NP-FM91/QM91 585 1010

Approximate number of minutes when you use a fully charged battery pack

Approximate continuous playing time at 25°C (77°F). The battery life will be shorter if

you use your camcorder in a cold environment.

The recording and playing time of a normally charged battery are about 90% of those of

a fully charged battery.

What is the ”InfoLITHIUM”?

The “InfoLITHIUM” is a lithium ion battery pack which can exchange data such as

battery consumption with compatible electronic equipment. This unit is compatible

with the “InfoLITHIUM” battery pack (M series). Your camcorder operates only with

the “InfoLITHIUM” battery pack. “InfoLITHIUM” M series battery packs have the

mark.

“InfoLITHIUM” is a trademark of Sony Corporation.

Step 1 Preparing the power supply

15

Getting started

Connecting to a wall outlet

When you use your camcorder for a long time, we recommend that you power it from a

wall outlet using the AC power adaptor.

(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN

jack on your camcorder with the plug’s v mark facing up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

PRECAUTION

The set is not disconnected from the AC power source (wall outlet) as long as it is

connected to the wall outlet, even if the set itself has been turned off.

Notes

•The AC power adaptor can supply power even if the battery pack is attached to your

camcorder.

•The DC IN jack has “source priority.” This means that the battery pack cannot supply

any power if the power cord is connected to the DC IN jack, even when the power

cord is not plugged into a wall outlet.

•Place the AC power adaptor near a wall outlet.

While using the AC power adaptor, if any trouble occurs with this unit, disconnect the

plug from the wall outlet as soon as possible to cut off the power.

Using a car battery

Use Sony DC Adaptor/Charger (optional). Refer to the operating instructions of the DC

Adaptor /Charger for further information.

Step 1 Preparing the power supply

1 2,3

16

Step 2 Setting the date and time

Set the date and time settings when you use your camcorder for the first time.

“CLOCK SET” will be displayed each time when you set the power switch to CAMERA

unless you set the date and time settings.

If you do not use your camcorder for about 6 months, the date and time settings may be

released (bars may appear) because the built-in rechargeable battery in your camcorder

will have been discharged.

First, set the year, then the month, the day, the hour and then the minute.

(1) While your camcorder is in CAMERA mode, press MENU to display the

menu.

(2) Turn the SEL/PUSH EXEC dial to select

, then press the dial.

(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.

(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.

(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and

pressing the dial.

(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by

the time signal. The clock starts to operate.

(7) Press MENU to make the menu disappear. The time indicator appears.

2

4

1,7

3

6

MENU

M

USB STREA

M

USB STREA

M

USB STREA

CLOCK SET

[

MENU

]

:

END

SETUP MENU

CLOCK SET

LTR SIZE

AUTO DATE

LANGUAGE

DEMO MODE

SETUP MENU

––

:

––

:

––

RETURN

[

MENU

]

:

END

SETUP MENU

12 00

AM

[

MENU

]

:

END

RETURN

SETUP MENU

[

MENU

]

:

END

RETURN

CLOCK SET

SETUP MENU

[

MENU

]

:

END

RETURN

CLOCK SET

LTR SIZE

LANGUAGE

DEMO MODE

CLOCK SET

LTR SIZE

LANGUAGE

DEMO MODE

JAN

12002

JUL

4 2002

1

2:30:00

PM

JUL

42002

1230

PM

JAN

12002

12 00

AM

LTR SIZE

LANGUAGE

DEMO MODE

LTR SIZE

LANGUAGE

DEMO MODE

AUTO DATE

M

USB STREA

M

USB STREA

JAN

12002

200

AM

1

17

Getting started

To check the preset date and time

Press DATE to display the date indicator.

Press TIME to display the time indicator.

Press DATE (or TIME) and then press TIME (or DATE) to simultaneously display the

date and time indicator.

Press DATE and/or TIME again. The date and/or time indicator disappears.

The year changes as follows:

Auto date function

When you use your camcorder for the first time, turn it on and set the date and time to

your local time before you start recording (p. 16). The date is automatically recorded for

10 seconds after you start recording (Auto date function). This function works only

once a day.

Note on the time indicator

The internal clock of your camcorder operates on a 12-hour cycle.

•12:00 AM stands for midnight.

•12:00 PM stands for noon.

Note on the auto date function

You can change the AUTO DATE setting by selecting ON or OFF in the menu settings.

The auto date function automatically displays the date once a day.

However, the date may automatically appear more than once a day if:

– you set the date and time.

– you eject and insert the tape again.

– you stop recording within 10 seconds.

– you set AUTO DATE to OFF once and set it back to ON in the menu settings.

Step 2 Setting the date and time

t 1995 T

. . . .

t 2002 T

. . . .

t 2079 T

18

When you want to record in the Hi8 system, use Hi8 video cassettes.

(1) Prepare the power supply (p. 11).

(2) Open the lid of the cassette compartment, and press Z EJECT. The cassette

compartment opens automatically.

(3) Insert a cassette into the cassette compartment with its window facing out and

the write-protect tab on the cassette up.

(4) Close the cassette compartment by pressing the

mark on the cassette

compartment. The cassette compartment automatically goes down.

(5) Close the lid of the cassette compartment.

To eject a cassette

Follow the procedure above, and eject the cassette in step 3.

Notes

•Do not press the cassette compartment down. Doing so may cause a malfunction.

•The cassette compartment may not be closed when you press any part of the cassette

compartment other than the mark.

•Do not pick up your camcorder by the lid of the cassette compartment.

To prevent accidental erasure

Slide the write-protect tab on the cassette to expose the red mark.

Step 3 Inserting a cassette

EJECT

2 3

4

19

Recording

– Basics

5

3

1

2

40min

REC

0:00:01

4

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

POWER

C

A

M

E

R

A

P

L

A

Y

E

R

O

F

(

C

H

G

)

POWER

— Recording – Basics —

Recording a picture

Your camcorder automatically focuses for you.

(1) Remove the lens cap by pressing both knobs on its sides and attach the lens

cap to the grip strap.

(2) Install the power source and insert a cassette. See “Step 1” to “Step 3” for more

information (p. 11 to 18).

(3) Set the POWER switch to CAMERA while pressing the small green button.

Your camcorder is set to the standby mode.

(4) Open the LCD panel while pressing OPEN. The viewfinder automatically

turns off.

(5) Press START/STOP. Your camcorder starts recording. The REC indicator

appears. The recording lamp located on the front of your camcorder lights up.

To stop recording, press START/STOP again.

The recording lamp lights up in the viewfinder when you record with the

viewfinder.

Recording

lamp

Microphone

Notes

•Fasten the grip strap firmly.

•Do not touch the built-in microphone during recording.

Note on Recording mode

Your camcorder records and plays back in the SP (standard play) mode and in the LP

(long play) mode. Select SP or LP in the menu settings (p. 70). In the LP mode, you can

record twice as long as in the SP mode. When you record a tape in the LP mode on your

camcorder, we recommend that you play back the tape on your camcorder.

20

To enable smooth transition

You can make the transition between the last scene you recorded and the next scene

smooth as long as you do not eject the cassette even if you turn off your camcorder.

When you change the battery pack, set the POWER switch to OFF (CHG).

If you leave your camcorder in the standby mode for 5 minutes while the cassette

is inserted

Your camcorder automatically turns off. This is to save battery power and to prevent

battery and tape wear. To resume the standby mode for recording, set the POWER

switch to OFF (CHG) once, then turn it to CAMERA, or press START/STOP without

chainging the POWER switch again to start recording. If your camcorder is in the

standby mode, with no cassette inserted, it does not turn off automatically.

When you record in the SP and LP modes on one tape or you record some scenes

in the LP mode

The playback picture may be distorted.

To set the counter to 0:00:00

Press COUNTER RESET (p. 94).

Adjusting the LCD screen

The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to

the lens side.

If you turn the LCD panel over so that it faces the other way, the indicator appears

on the screen (Mirror mode).

When closing the LCD panel, set it vertically until it clicks, and swing it into the

camcorder body.

Note

When using the LCD screen except in the mirror mode, the viewfinder automatically

turns off.

When you use the LCD screen outdoors in direct sunlight

The LCD screen may be difficult to see. If this happens, we recommend that you record

with the viewfinder.

When you adjust angles of the LCD panel

Be sure to open the LCD panel up to 90 degrees.

Picture in the mirror mode

The picture on the LCD screen is a mirror-image. However, the picture will be normal

when recorded.

Recording a picture

180°

90°

La pagina sta caricando ...

Sony CCD-TRV608 Manuale utente

Questo manuale è adatto anche per

Sony CCD-TRV608 Manuale utente

in altre lingue

Documenti correlati

Altri documenti