Roland MOBILE BA Manuale del proprietario

Marca: Roland

Modello: MOBILE BA

Tipo: Manuale del proprietario

BATTERY POWERED STEREO AMPLIFIER

Owner’s Manual

Gebruikershandleiding

Bedienungsanleitung

Mode d’emploi

Manuale dell’utente

Manual del usuario

Manual do proprietário

Deutsch Français Italiano Español Português NederlandsEnglish

This product complies with the requirements of EMC Directive 2004/108/EC.

For EU Countries

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

NOTICE

AVIS

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment requires shielded interface cables in order to meet FCC class B limit.

Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

For Canada

WARNING

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

For C.A. US

(

Proposition 65

)

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE:

BROWN:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL

LIVE

For the U.K.

Owner’s Manual

BATTERY POWERED STEREO AMPLIFIER

Deutsch Français Italiano Español Português NederlandsEnglish

Easy portability

• A compact stereo amp with two 10 cm (4-inch) speakers and 5 W (2.5 W + 2.5 W) output power.

• Six alkaline batteries (AA, LR6) allow approximately 15 hours of operation, letting you use the unit

anywhere.

• A dedicated strap is included for convenient portability.

CORPORATION.

Useable in a variety of situations

• In addition to microphone input and line input, the unit also provides for PC/AUDIO input. This

allows you to conveniently connect personal computers, a variety of digital audio playback devices

(including smartphones), and CD players. The lightweight, battery-powered MOBILE BA is ready to

perform almost anywhere, whether it be at the oce, a school or college, or outdoors. And, with three

dierent kinds of input, it can accept almost any device you want to connect to it.

• You can use a commercially available mic stand to position the MOBILE BA at an ideal height for

monitoring or for use as a simple PA system.

In the oce In the classroom Outdoors

Use for vocal lessons or karaoke

• The MOBILE BA provides a Center Cancel function, which lets you remove the vocal from a song

played back by your music CD or digital audio player. At the simple touch of a button, you can create

a minus-one song—a feature that is eminently useful for vocal lessons or karaoke.

• Also built-in is a Mic Echo function, which adds great-sounding ambience to your vocals.

Getting Ready

1. Pass the strap through the strap holder.

2. Secure the strap to the strap pin.

NOTE

• Use only the provided strap.

• Attach the strap securely so that it does not easily become

detached. If the strap is loose, and you use it that way

when carrying the MOBILE BA, the amp could be dropped,

possibly resulting in damage or injury.

• Do not spin or swing the MOBILE BA while holding it by

the strap. This is extremely dangerous, as it may cause the

strap to become detached; or, if the motion is repeated

enough, may even break the strap.

• The included strap is meant for exclusive use with the

MOBILE BA. Do not use this strap for other products.

OK NG

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (p. 11; p. 14). These sections provide important information concerning the

proper operation of the unit. Additionally, in order to feel assured that you have gained a good

grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety.

The manual should be saved and kept on hand as a convenient reference.

Attaching the Strap

Getting Ready

Deutsch Français Italiano Español Português NederlandsEnglish

Installing the Batteries

Insert the included six alkaline batteries (AA, LR6)

as shown in the illustration, making sure that their

polarity is correct.

NOTE

• When closing the lid of the battery compartment, rst insert the catches on the lid into the matching

cavities, then push the lid down rmly until you hear a click.

• Incorrect handling of batteries can cause leakage, overheating, re, or explosion. Before use, you must

read and strictly observe all of the precautions that accompany the batteries.

• Carefully follow the installation instructions for batteries, and make sure you observe the correct

polarity.

• Avoid using new batteries together with used ones. In addition, avoid mixing dierent types of

batteries.

• Remove the batteries whenever the unit is to remain unused for an extended period of time.

• Never keep batteries together with metallic objects such as ballpoint pens, necklaces, hairpins, etc.

• Used batteries must be disposed of in compliance with whatever regulations for their safe disposal that

may be observed in the region in which you live.

• If operating this unit on batteries, please use alkaline batteries.

• If operating this unit on batteries, please disconnect the AC adaptor from this unit.

• Expected battery life under continuous use:

Alkaline (AA, LR6): approximately 15 hours

* These gures will vary depending on the specications of the batteries and the actual conditions of

use.

MEMO

If you want to use an AC adaptor (sold separately), refer to p. 6.

Panel Descriptions

Adjusting the volume

Top Panel

[MIC VOLUME] knob

This knob adjusts the volume of the microphone.

The anti-feedback function (p. 7) suppresses the occurrence

of acoustic feedback.

[LINE VOLUME] knob

This knob adjusts the volume of the device

connected to the LINE jacks.

[PC/AUDIO VOLUME] knob

This knob adjusts the volume of the device

connected to the PC/AUDIO jacks (stereo

mini-jack and RCA phono jacks).

* If you want to independently adjust the

volume of the devices connected to the

stereo mini-jack and the RCA phono

jacks, adjust the volume on the devices

themselves.

Power indicator

This indicator lights when the unit is turned on.

* When operating on battery power only, the unit’s indicator will become dim during play when battery

power gets too low. Replace the battery as soon as possible.

[TONE] knob

This knob adjusts the brightness of the sound

that’s output by the MOBILE BA. Turning the

knob toward the right will brighten the sound;

turning it toward the left will produce a milder

tone.

Adjusting the brightness of

the sound

[CENTER CANCEL] switch

When playing back a song from a device connected to the PC/AUDIO jacks, pressing this switch

to turn it on will minimize sounds (e.g., vocals) heard from the center of the stereo eld. This

allows you to enjoy karaoke using commercially available music CDs.

* For some stereo sources, it may not be possible to obtain a sucient cancellation eect.

* If you’re using a digital audio player, the sound may not play back correctly, depending on how the source was

compressed.

OFFON

Eliminating the vocal (Center Cancel)

Panel Descriptions

Deutsch Français Italiano Español Português NederlandsEnglish

Applying an echo to sound from the microphone

Side Panel (Connecting Your Equipment)

NOTE

To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units

before making any connections.

MIC jack

Connect a microphone equipped

with a 1/4” phone plug.

LINE jacks

Connect a keyboard or rhythm machine.

Stereo input is supported (two 1/4” plugs).

PC/AUDIO jacks

Connect a computer, digital

audio player, or CD player.

Either stereo mini-plug or RCA

phono connection is supported.

The sound of the devices con-

nected to the stereo mini-jack

and the RCA phono jacks will

be mixed.

[MIC ECHO] knob

You can apply echo to the sound from the microphone.

Turning the knob toward the right will apply increasing amounts of reverberation. The left half of the knob’s

range (OFF–center) will apply a natural-sounding reverb; the right half will apply a repeating echo that is ideal

for karaoke.

Panel Descriptions

Rear Panel

Side Panel

PHONES jack

Connect headphones equipped

with a stereo mini-plug.

DC IN jack

Connect an AC adaptor (sold separately).

* Use only the PSB-series AC adaptor. Use of other

AC adaptors may damage the amp or result in

other problems.

* We recommend that you keep batteries installed

in the unit even though you’ll be powering it

with the AC adaptor. That way, you’ll be able to

continue using even if the cord of the AC adaptor

gets accidently disconnected from the unit.

Place the AC adaptor so the

side with the indicator (see

illustration) faces upwards

and the side with textual

information faces downwards.

The indicator will light when

you plug the AC adaptor into

an AC outlet.

POWER switch

Turns the power on and o.

Security slot (

)

http://www.kensington.com/

Battery compartment

Insert six alkaline batteries (AA, LR6).

Refer to “Installing the Batteries” (p. 3).

Ground terminal

Refer to p. 15.

Panel Descriptions

Deutsch Français Italiano Español Português NederlandsEnglish

Turning the Power On and O

* Once everything is properly connected, be sure to follow the procedure below to turn on

their power. If you turn on equipment in the wrong order, you risk causing malfunction or

equipment failure.

1. Make sure that all volume controls on the MOBILE BA and all connected devices are at

the minimum setting.

2. Turn on the power of the connected devices.

3. Press the [POWER] switch to turn on the MOBILE BA.

* This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning the

unit on is required before it will operate normally.

4. Adjust the volume of the MOBILE BA and the connected devices.

5. When you want to turn the power o, minimize the volume on the MOBILE BA and

all connected devices, and then turn o their power in the opposite order of that

followed when turning them on.

* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume

turned down, you might hear some sound when switching the unit on/o. However, this is

normal and does not indicate a malfunction.

Anti-Feedback Function

The MOBILE BA has an anti-feedback function, which suppresses the occurrence of acoustic

feedback.

Acoustic feedback is the unpleasant howl or squeal that can occur when a microphone is pointed

toward speakers, or when the volume is high.

The anti-feedback function of the MOBILE BA is always active, in order to suppress feedback.

* If the anti-feedback function is not enough to suppress feedback, take the following steps.

• Change the direction of the microphone

• Move the microphone away from the speakers

• Lower the volume

By using a mic stand, you can mount the MOBILE BA

at the optimal height for use as a monitor speaker or

simple PA device.

The mic stand holder (the hole diameter) is compatible

with both 3/8-inch and 5/8-inch types.

If you’re using the MOBILE BA with a 5/8 inch mic stand,

remove the mic stand adaptor from the bottom of the

unit.

NOTE

• When placing the MOBILE BA upside down, take care not to damage the buttons or knobs, and be

careful not to let it fall or tip over.

• If you’re not using a mic stand, be sure to attach the mic stand adaptor to prevent leakage of sound

(air).

Requirements when using a mic stand

As shown in the illustration, you must use a mic stand

that can be lower than 125 cm (49-1/4”; including the

MOBILE BA), and whose legs will be 63 cm (24-13/16”)

or more when opened to a maximum width.

NOTE

• Using a mic stand that does not meet the specications above may result in damage to equipment or

injury due to the stand tipping over.

• When using MOBILE BA with a mic stand, the mic stand must be carefully placed so it is level and sure

to remain stable.

• Cables connected to MOBILE BA should be given enough slack to prevent accidents that might result

from someone tripping over them.

• To prevent accidents due to falls, do not place any object on the MOBILE BA when it’s mounted on a

mic stand.

• After attaching the MOBILE BA to the mic stand, check to make sure that it is stable before you use it.

Mic stand adaptor

Mic stand holder

125 cm

(49-1/4”)

or less

63 cm (24-13/16”) or more

Mounting on a Mic Stand

Deutsch Français Italiano Español Português NederlandsEnglish

If the system does not work as you expect, check the following points rst.

Problem Items to check Action Page

Power won’t turn on

Could the batteries be

exhausted?

When operating on battery

power only, the power indicator

will become dim during play

when battery power gets too

low. Install fresh batteries.

p. 3

Is the specied AC adaptor

(PSB-series; sold separately)

connected correctly?

Check the connection once

again. Never use any AC adaptor

other than the specied model.

p. 6

No sound/

Insucient volume

Are connections with other

devices correct?

Check the connections again. p. 5

Is the [VOLUME] knob set

appropriately?

Adjust the volume appropriately. p. 4

Could headphones be

connected?

If headphones are connected, no

sound will be produced from the

unit’s speakers.

–

Insucient volume from the

speakers

Could the batteries be

exhausted?

Install fresh batteries. p. 3

The volume level of the device

connected to LINE or

PC/AUDIO jacks are too low

Could you be using a connection

cable that contains a resistor?

Use a connection cable that does

not contain a resistor.

–

Something is wrong with

the sound of the device

connected to the PC/AUDIO

jacks

Could the Center Cancel function

be on?

Press the [CENTER CANCEL]

switch to turn o the Center

Cancel function.

p. 4

Sound is distorted or noisy

Could each [VOLUME] knob be

raised excessively?

Turn each [VOLUME] knob

toward the left to adjust the

volume appropriately.

p. 4

Is the input level from the

connected device appropriate?

Lower the volume of the

connected device.

–

Could the batteries be

exhausted?

Sounds may distort easily or

may cut o when played at

high volume as the battery

power begins to fade, but this is

normal and does not indicate a

malfunction.

In such instances, either replace

the batteries or use the AC

adaptor (sold separately).

p. 3

p. 6

Troubleshooting

Roland MOBILE BA: BATTERY POWERED STEREO AMPLIFIER

Rated Power Output 2.5 W + 2.5 W

Nominal Input Level

(1 kHz)

MIC jack: -50 dBu

LINE jacks: -10 dBu

PC/AUDIO jacks: -10 dBu

Speakers 10 cm (4 inches) x 2

Controls

POWER switch

TONE knob

MIC ECHO knob

<MIC>

VOLUME knob

<LINE>

VOLUME knob

VOLUME knob

CENTER CANCEL switch

Indicator Power

Connectors

MIC jack: 1/4-inch phone type

LINE L/MONO jack: 1/4-inch phone type

LINE R jack: 1/4-inch phone type

PC/AUDIO jacks: Stereo miniature phone type, RCA phono type

PHONES jack: Stereo miniature phone type

DC IN jack

Power Supply DC 9 V: Alkaline battery (AA, LR6) x 6 or AC Adaptor (sold separately)

Current Draw 175 mA

Expected battery life

under continuous use

Alkaline battery (AA, LR6): approximately 15 hours

* These gures will vary depending on the specications of the batteries and the

actual conditions of use.

Dimensions

280 (W) x 108 (D) x 177 (H) mm

11-1/16 (W) x 4-1/4 (D) x 7 (H) inches

Weight 2.5 kg / 5 lbs 9 oz (including batteries)

Accessories Strap, Alkaline battery (AA, LR6) x 6, Owner’s Manual

Option

(sold separately)

AC adaptor (PSB series)

* 0 dBu = 0.775 Vrms

* In the interest of product improvement, the specications and/or appearance of this unit are

subject to change without prior notice.

Specications

Deutsch Français Italiano Español Português NederlandsEnglish

USING THE UNIT SAFELY

WARNING

Do not disassemble or modify by yourself

Do not open (or modify in any way) the unit or

its AC adaptor.

Do not repair or replace parts by yourself

Do not attempt to repair the unit, or replace

parts within it (except when this manual

provides specic instructions directing you to do

so). Refer all servicing to your retailer, the nearest

Roland Service Center, or an authorized Roland

distributor, as listed on the “Information” page.

Do not use or store in the following types of

locations

• Subject to temperature extremes (e.g., direct

sunlight in an enclosed vehicle, near a heating

duct, on top of heat-generating equipment);

or are

• Damp (e.g., baths, washrooms, on wet oors);

or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and

shakiness.

WARNING

Do not place in an unstable location

Make sure you always have the unit placed so

it is level and sure to remain stable. Never place

it on stands that could wobble, or on inclined

surfaces.

Use only the specied AC adaptor and the correct

voltage

Use only the specied AC adaptor (p. 10), and

make sure the line voltage at the installation

matches the input voltage specied on the AC

adaptor’s body. Other AC adaptors may use a

dierent polarity, or be designed for a dierent

voltage, so their use could result in damage,

malfunction, or electric shock.

Use only the included power cord

Use only the attached power-supply cord. Also,

the supplied power cord must not be used with

any other device.

Do not bend the power cord or place heavy objects

on it

Do not excessively twist or bend the power

cord, nor place heavy objects on it. Doing so can

damage the cord, producing severed elements

and short circuits. Damaged cords are re and

shock hazards!

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING

WARNING

Avoid extended use at high volume

This unit, either alone or in combination with an

amplier and headphones or speakers, may be

capable of producing sound levels that could

cause permanent hearing loss. Do not operate

for a long period of time at a high volume

level, or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the

ears, you should immediately stop using the

unit, and consult an audiologist.

Don’t allow foreign objects or liquids to enter unit;

never place containers with liquid on unit

Do not place containers containing liquid on

this product. Never allow foreign objects (e.g.,

ammable objects, coins, wires) or liquids (e.g.,

water or juice) to enter this product. Doing so

may cause short circuits, faulty operation, or

other malfunctions.

Turn o the unit if an abnormality or malfunction

occurs

Immediately turn the unit o, remove the AC

adaptor from the outlet, and request servicing

by your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as

listed on the “Information” page when:

• The AC adaptor, the power-supply cord, or the

plug has been damaged; or

• If smoke or unusual odor occurs; or

• Objects have fallen into, or liquid has been

spilled onto the unit; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate normally

or exhibits a marked change in performance.

Adults must provide supervision in places where

children are present

When using the unit in locations where children

are present, be careful so no mishandling of the

unit can take place. An adult should always be

on hand to provide supervision and guidance.

Do not drop or subject to strong impact

Protect the unit from strong impact.

(Do not drop it!)

WARNING

Do not share an outlet with an unreasonable

number of other devices

Do not force the unit’s power-supply cord to

share an outlet with an unreasonable number of

other devices. Be especially careful when using

extension cords—the total power used by all

devices you have connected to the extension

cord’s outlet must never exceed the power

rating (watts/amperes) for the extension cord.

Excessive loads can cause the insulation on the

cord to heat up and eventually melt through.

Do not use overseas

Before using the unit in a foreign country,

consult with your retailer, the nearest Roland

Service Center, or an authorized Roland

distributor, as listed on the “Information” page.

Handle batteries carefully

• Batteries must never be recharged, heated,

taken apart, or thrown into re or water.

• Never expose batteries to excessive heat such

as sunshine, re or the like.

• Incorrect handling of batteries can cause

leakage, overheating, re, or explosion.

Before use, you must read and strictly observe

all of the precautions that accompany the

batteries.

Deutsch Français Italiano Español Português NederlandsEnglish

CAUTION

Place in a well ventilated location

The unit and the AC adaptor should be located so

their location or position does not interfere with

their proper ventilation.

Grasp the plug when connecting or disconnecting

the AC adaptor

Always grasp only the plug on the AC adaptor

cord when plugging into, or unplugging from,

an outlet or this unit.

Periodically clean the AC adaptor’s plug

At regular intervals, you should unplug the AC

adaptor and clean it by using a dry cloth to wipe

all dust and other accumulations away from

its prongs. Also, disconnect the power plug

from the power outlet whenever the unit is to

remain unused for an extended period of time.

Any accumulation of dust between the power

plug and the power outlet can result in poor

insulation and lead to re.

Manage cables for safety

Try to prevent cords and cables from becoming

entangled. Also, all cords and cables should be

placed so they are out of the reach of children.

Avoid climbing on top of the unit, or placing heavy

objects on it

Never climb on top of, nor place heavy objects

on the unit.

Do not connect or disconnect the AC adaptor with wet

hands

Never handle the AC adaptor or its plugs with

wet hands when plugging into, or unplugging

from, an outlet or this unit.

Disconnect everything before moving the unit

Before moving the unit, disconnect the AC

adaptor and all cords coming from external

devices.

Unplug the AC adaptor from the outlet before

cleaning

Before cleaning the unit, turn it o and unplug

the AC adaptor from the outlet (p. 6).

If there is a possibility of lightning strike,

disconnect the AC adaptor from the outlet

Whenever you suspect the possibility of

lightning in your area, disconnect the AC

adaptor from the outlet.

CAUTION

Handle batteries carefully

If used improperly, batteries may explode or

leak and cause damage or injury. In the interest

of safety, please read and observe the following

precautions (p. 3).

• Carefully follow the installation instructions

for batteries, and make sure you observe the

correct polarity.

• Avoid using new batteries together with used

ones. In addition, avoid mixing dierent types

of batteries.

• Remove the batteries whenever the unit is to

remain unused for an extended period of time.

• Never keep batteries together with metallic

objects such as ballpoint pens, necklaces,

hairpins, etc.

• Used batteries must be disposed of in

compliance with whatever regulations for their

safe disposal that may be observed in the region

in which you live.

Keep small items out of the reach of children

To prevent accidental ingestion of the parts

listed below, always keep them out of the reach

of small children.

• Removable Parts

Mic stand adaptor (p. 8)

Handle the ground terminal carefully

If you remove the screw from the ground

terminal, be sure to replace it; don’t leave it lying

around where it could accidently be swallowed by

small children. When refastening the screw, make

that it is rmly fastened, so it won’t come loose.

Handle leaking batteries carefully

• If uid has leaked from a battery, make sure

not to touch it with your bare hands.

• If any of the leaking uid gets into your eyes,

the loss of vision may result. Do not rub your

eyes; use clean water to ush them thoroughly.

Then, promptly see a doctor.

• Burning of the skin or dermatitis may result if

uid has gotten onto your skin or clothing. Use

clean water to ush aected areas thoroughly;

then, promptly see a doctor.

• Using a soft cloth, carefully wipe any

remaining uid from the inside of the battery

compartment. Then, install new batteries.

IMPORTANT NOTES

Power Supply

• Do not connect this unit to same electrical outlet that is

being used by an electrical appliance that is controlled

by an inverter or a motor (such as a refrigerator,

washing machine, microwave oven, or air conditioner).

Depending on the way in which the electrical appliance

is used, power supply noise may cause this unit to

malfunction or may produce audible noise. If it is not

practical to use a separate electrical outlet, connect

a power supply noise lter between this unit and the

electrical outlet.

• The AC adaptor will begin to generate heat after long

hours of consecutive use. This is normal, and is not a

cause for concern.

• The use of an AC adaptor is recommended as the unit’s

power consumption is relatively high. Should you prefer

to use batteries, please use the alkaline type.

• To prevent malfunction and equipment failure, always

make sure to turn o the power on all your equipment

before you make any connections.

Power Supply: Use of Batteries

• When installing or replacing batteries, always turn this

unit o and disconnect any other devices you may have

connected. This way, you can prevent malfunction and

damage.

• The life of the supplied batteries may be limited, since

its primary purpose was to enable testing.

• If the batteries run extremely low, the sound may

distort / interruptions in the sound may occur at high

volume levels, but this does not indicate a malfunction.

If this occurs, please replace the batteries / use the AC

adaptor (sold separately).

• If operating this unit on batteries, please use alkaline

batteries.

• If operating this unit on batteries, please disconnect the

AC adaptor from this unit.

Placement

• Using the unit near power ampliers (or other

equipment containing large power transformers) may

induce hum. To alleviate the problem, change the

orientation of this unit; or move it farther away from the

source of interference.

• This device may interfere with radio and television

reception. Do not use this device in the vicinity of such

receivers.

• Noise may be produced if wireless communications

devices, such as cell phones, are operated in the vicinity

of this unit. Such noise could occur when receiving

or initiating a call, or while conversing. Should you

experience such problems, you should relocate such

wireless devices so they are at a greater distance from

this unit, or switch them o.

• Do not expose the unit to direct sunlight, place it near

devices that radiate heat, leave it inside an enclosed

vehicle, or otherwise subject it to temperature extremes.

Excessive heat can deform or discolor the unit.

• When moved from one location to another where the

temperature and/or humidity is very dierent, water

droplets (condensation) may form inside the unit.

Damage or malfunction may result if you attempt to

use the unit in this condition. Therefore, before using

the unit, you must allow it to stand for several hours,

until the condensation has completely evaporated.

• Depending on the material and temperature of the

surface on which you place the unit, its rubber feet may

discolor or mar the surface.

You can place a piece of felt or cloth under the rubber

feet to prevent this from happening. If you do so,

please make sure that the unit will not slip or move

accidentally.

• Do not put anything that contains water on this unit.

Also, avoid the use of insecticides, perfumes, alcohol, nail

polish, spray cans, etc., near the unit. Swiftly wipe away

any liquid that spills on the unit using a dry, soft cloth.

Maintenance

• For everyday cleaning wipe the unit with a soft, dry cloth

or one that has been slightly dampened with water. To

remove stubborn dirt, use a cloth impregnated with a

mild, non-abrasive detergent. Afterwards, be sure to

wipe the unit thoroughly with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or

deformation.

Deutsch Français Italiano Español Português NederlandsEnglish

Additional Precautions

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using

its jacks and connectors. Rough handling can lead to

malfunctions.

• When disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will avoid

causing shorts, or damage to the cable’s internal

elements.

• To avoid disturbing others nearby, try to keep the unit’s

volume at reasonable levels.

• When you need to transport the unit, package it in the

box (including padding) that it came in, if possible.

Otherwise, you will need to use equivalent packaging

materials.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to

this unit. The use of such cables can cause the sound

level to be extremely low, or impossible to hear. For

information on cable specications, contact the

manufacturer of the cable.

Ground terminal

• Depending on the circumstances of a particular setup,

you may experience a discomforting sensation, or

perceive that the surface feels gritty to the touch when

you touch this device, microphones connected to it,

or the metal portions of other objects. This is due to

an innitesimal electrical charge, which is absolutely

harmless. However, if you are concerned about this,

connect the ground terminal with an external ground.

When the unit is grounded, a slight hum may occur,

depending on the particulars of your installation. If

you are unsure of the connection method, contact the

nearest Roland Service Center, or an authorized Roland

distributor, as listed on the “Information” page.

Unsuitable places for connection

• Water pipes (may result in shock or electrocution)

• Gas pipes (may result in re or explosion)

• Telephone-line ground or lightning rod (may be

dangerous in the event of lightning)

Copyrights/Licences/Trademarks

• It is forbidden by law to make an audio recording,

video recording, copy or revision of a third party’s

copyrighted work (musical work, video work, broadcast,

live performance, or other work), whether in whole or in

part, and distribute, sell, lease, perform, or broadcast it

without the permission of the copyright owner.

• Do not use this product for purposes that could infringe

on a copyright held by a third party.

We assume no responsibility whatsoever with regard

to any infringements of third-party copyrights arising

through your use of this product.

• MMP (Moore Microprocessor Portfolio) refers to a

patent portfolio concerned with microprocessor

architecture, which was developed by Technology

Properties Limited (TPL). Roland has licensed this

technology from the TPL Group.

• Roland is an either registered trademark or trademark

of Roland Corporation in the United States and/or other

countries.

• Company names and product names appearing in this

document are registered trademarks or trademarks of

their respective owners.

Bedienungsanleitung

BATTERIEBETRIEBENER STEREOVERSTÄRKER

Deutsch Français Italiano Español Português NederlandsEnglish

Einfach zu transportieren

• Kompakter Stereoverstärker mit zwei 10-cm-Lautsprechern (4 Zoll) und 5 W Ausgangsleistung (2,5 W

+ 2,5 W).

• Sechs Alkalibatterien (AA, LR6) ermöglichen ca. 15 Stunden Betrieb unabhängig vom Stromnetz.

• Inklusive Tragegurt.

Genehmigung der ROLAND CORPORATION.

Vielfältige Einsatzmöglichkeiten

• Neben einem Mikrofon- und Line-Eingang bietet das Gerät einen PC/AUDIO-Eingang. Das ermöglicht

den bequemen Anschluss von Rechnern mit Audioausgang, MP3-Playern (einschl. Smartphones) und

CD-Playern. Der MOBILE BA ist überall einsatzbereit, ob im Büro, in der Schule, Universität oder im

Freien.

• Mit Hilfe eines handelsüblichen Mikrofonständers können Sie den MOBILE BA auf einer optimalen

Höhe als Monitor oder für eine einfache PA-Anlage einsetzen.

Im Büro Im Klassenzimmer Im Freien

Für Gesangsunterricht oder Karaoke

• Der MOBILE BA besitzt eine Center-Cancel-Funktion, mit der Sie z.B. den Gesang aus einer CD- oder

MP3-Player-Musikwiedergabe entfernen können. Per einfachen Tastendruck können Sie einen „Minus-

One“-Song erzeugen – eine für Gesangsunterricht oder Karaoke besonders nützliche Funktion.

• Außerdem ist eine Mic-Echo-Funktion integriert, die dem Gesang einen zusätzlichen Raumklang

verleiht.

Vorbereitungen

1. Führen Sie den Gurt durch die Halterung.

2. Befestigen Sie den Gurt am Gurt-Pin.

HINWEIS

• Nur den mitgelieferten Gurt verwenden.

• Befestigen Sie den Gurt so, dass er sich nicht versehentlich

lösen kann. Falls der Gurt locker ist, während der MOBILE

BA am Gurt getragen wird, könnte der Verstärker zu Boden

fallen, was Schäden oder Verletzungen verursachen kann.

• Machen Sie keine Dreh- oder Schwingbewegungen mit

dem MOBILE BA, während Sie ihn am Gurt halten. Dies ist

äußerst gefährlich, da sich dadurch der Gurt lösen oder,

wenn die Bewegung zu oft wiederholt wird, sogar reißen

kann.

• Der mitgelieferte Gurt ist für den ausschließlichen

Gebrauch mit dem MOBILE BA vorgesehen. Verwenden Sie

diesen Gurt nicht für andere Produkte.

RICHTIG FALSCH

Bevor Sie das Gerät einsetzen, lesen Sie die Abschnitte mit den folgenden Titeln sorgfältig

durch: „SICHERER BETRIEB DES GERÄTES“ und „WICHTIGE HINWEISE“ (S. 11; S. 14). Diese Abschnitte

liefern wichtige Hinweise zum sicheren Betrieb des Geräts. Um sicherzustellen, dass Sie

mit dem gesamten Funktionsumfang Ihres neuen Gerätes vertraut sind, sollten Sie die

Bedienungsanleitung vollständig lesen. Bewahren Sie diese Anleitung an einem Ort auf, an dem

Sie bei Bedarf schnell darauf zurückgreifen können.

Anbringen des Tragegurts

La pagina sta caricando ...

Roland MOBILE BA Manuale del proprietario

Marca: Roland

Modello: MOBILE BA

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Roland MOBILE BA Owner's manual
français: Roland MOBILE BA Le manuel du propriétaire
español: Roland MOBILE BA El manual del propietario
Deutsch: Roland MOBILE BA Bedienungsanleitung
Nederlands: Roland MOBILE BA de handleiding
português: Roland MOBILE BA Manual do proprietário

Documenti correlati

Altri documenti

Monacor SA-250SW Manuale utente