Simplicity 1695146 Manuale utente

Categoria
Tosa erba
Tipo
Manuale utente

Questo manuale è adatto anche per

LT200 Series
1739195
Revision C
18.5HP Hydro Tractor
Mfg. No. Description
2690863 ELT18538, 18.5HP and 38” Mower Deck
2690870 ELT18538, 18.5HP (CE)
2690871 ELT18538F, 18.5HP (CE, FR)
38” Mower Deck
Mfg. No. Description
1695146 38” Mower Deck (CE)
1695455 38” Mower Deck (CE, FR)
en
Operator’s Manual
Bedienungsanleitung
de
Manuale dell’operatore
fr
it
nl
Manuel de l’opérateur
Gebruiksaanwijzing
da
Betjeningsvejledning
es
Manual del operario
Not for
Reproduction
2
Not for
Reproduction
3
en
CONTENTS
Operator Safety ................................................................4
Safety Decals ...................................................................8
Features and Controls....................................................10
Operation ....................................................................... 12
Safety Interlock System Tests ........................................12
Maintenance ..................................................................16
Troubleshooting ............................................................. 19
Specifications ................................................................21
Warranty ........................................................................22
General Information
Thank you for purchasing this quality-built SNAPPER riding
mower. We’re pleased that you’ve placed your confidence
in the SNAPPER brand. When operated and maintained
according to the instructions in this manual, your SNAPPER
product will provide many years of dependable service.
This manual contains safety information to make you aware
of the hazards and risks associated with riding mowers
and how to avoid them. This riding mower is designed and
intended only for cutting grass and is not intended for any
other purpose. It is important that you read and understand
these instructions thoroughly before attempting to start or
operate the equipment. Save these original instructions for
future reference.
Product Reference Data
Record your model name/number, manufacturer’s
identification numbers, and engine serial numbers in the space
provided for easy access. These numbers can be found in the
locations shown.
When contacting your authorized dealer for replacement
parts, service, or information you MUST have these
numbers.
The Illustrated Parts List for this machine can be downloaded
from www.snapper.com. Please provide model and serial
number when ordering replacement parts.
Copyright © 2011 Briggs & Stratton Yard Power Products
Group, LLC
Milwaukee, WI, All rights reserved.
SNAPPER is a trademark of Briggs & Stratton Power Products
Group, LLC Milwaukee, WI USA.
A. Manufacturer’s Identification Number
B. Manufacturer’s Serial Number
C. Manufacturer’s Name and Address
D. Maximum Engine Speed in Rotations per Minute
E. Power Rating in Kilowatts
F. Mass of Unit in Kilograms
H. Year of Manufacture
G. CE Compliance Logo
I. Guaranteed Sound Power in Decibels
PRODUCT RefeRenCe DaTa
Model Description Name/Number
Unit MFG Number Unit SERIAL Number
Mower Deck MFG Number Mower Deck SERIAL Number
Dealer Name Date Purchased
enGIne RefeRenCe DaTa
Engine Make Engine Model
Engine Type/Spec Engine Code/Serial Number
CE Identication Tag
C
B
A
D
E
F
G
H
I
MODEL NO. xxxxxxx
SERIAL NO. xxxxxxxxxx
20xx
x.x kW
xxxx min
-1
xxx
dB
xxx kg
XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
Not for
Reproduction
4
Operator Safety
GENERAL OPERATION
1. Read, understand, and follow all instructions in the
manual and on the unit before starting.
2. Do not put hands or feet near rotating parts or under
the machine. Keep clear of the discharge opening at all
times.
3. Only allow responsible adults, who are familiar with the
instructions, to operate the unit (local regulations can
restrict operator age).
4. Clear the area of objects such as rocks, toys, wire, etc.,
which could be picked up and thrown by the blade(s).
5. Be sure the area is clear of other people before mowing.
Stop the unit if anyone enters the area.
6. Never carry passengers.
7. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while
travelling in reverse.
8. Never direct discharge material toward anyone. Avoid
discharging material against a wall or obstruction.
Material may ricochet back toward the operator. Stop
the blade(s) when crossing gravel surfaces.
9. Do not operate the machine without the entire grass
catcher, discharge guard (deflector), or other safety
devices in place.
10. Slow down before turning.
11. Never leave a running unit unattended. Always
disengage the PTO, set parking brake, stop engine, and
remove keys before dismounting.
12. Disengage blades (PTO) when not mowing. Shut off
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge guard.
13. Operate the machine only in daylight or good artificial
light.
14. Do not operate the unit while under the influence of
alcohol or drugs.
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of
unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This
mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text
signifies important cautions or warnings which must be followed.
15. Watch for traffic when operating near or crossing
roadways.
16. Use extra care when loading or unloading the unit into a
trailer or truck.
17. Always wear eye protection when operating this unit.
18. Data indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment
related injuries. These operators should evaluate
their ability to operate the equipment safely enough to
protect themselves and others from injury.
19. Follow the manufacturer’s recommendations for wheel
weights or counterweights.
20. Keep in mind the operator is responsible for accidents
occurring to other people or property.
21. All drivers should seek and obtain professional and
practical instruction.
22. Always wear substantial footwear and trousers. Never
operate when barefoot or wearing sandals.
23. Before using, always visually check that the blades
and blade hardware are present, intact, and secure.
Replace worn or damaged parts.
24. Disengage attachments before: refueling, removing an
attachment, making adjustments (unless the adjustment
can be made from the operator’s position).
25. When the machine is parked, stored, or left unattended,
lower the cutting means unless a positive mechanical
lock is used.
26. Before leaving the operator’s position for any reason,
engage the parking brake (if equipped), disengage the
PTO, stop the engine, and remove the key.
27. To reduce fire hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry
leaves, grass, or combustible materials.
Not for
Reproduction
5
en
Operator Safety
9. Do not try to stabilize the machine by putting your foot
on the ground (ride-on units).
10. Do not mow near drop-offs, ditches, or embankments.
The mower could suddenly turn over if a wheel is over
the edge of a cliff or ditch, or if an edge caves in.
11. Do not use grass catchers on steep slopes.
12. Do not mow slopes you cannot back up them.
13. See your authorized dealer/retailer for
recommendations of wheel weights or counterweights
to improve stability.
14. Remove obstacles such as rocks, tree limbs, etc.
15. Use slow speed. Tires may lose traction on slopes even
through the brakes are functioning properly.
16. Do not turn on slopes unless necessary, and then, turn
slowly and gradually downhill, if possible.
TOWED EQUIPMENT (RIDE-ON UNITS)
1. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
2. Follow the manufacturer’s recommendations for weight
limit for towed equipment and towing on slopes.
3. Never allow children or others in or on towed
equipment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
TRANSPORTING AND STORAGE
1. When transporting the unit on an open trailer, make
sure it is facing forward, in the direction of travel. If the
unit is facing backwards, wind lift could damage the
unit.
2. Always observe safe refueling and fuel handling
practices when refueling the unit after transportation or
storage.
3. Never store the unit (with fuel) in an enclosed poorly
ventilated structure. Fuel vapors can travel to an ignition
source (such as a furnace, water heater, etc.) and
cause an explosion. Fuel vapor is also toxic to humans
and animals.
4. Always follow the engine manual instructions for storage
preparations before storing the unit for both short and
long term periods.
5. Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
6. Never store the unit or fuel container inside where there
is an open flame or pilot light, such as in a water heater.
Allow unit to cool before storing.
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and
tipover accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not operate
on it.
Control of a walk-behind or ride-on machine sliding on a
slope will not be regained by the application of the brake.
The main reasons for loss of control are: insufficient tire
grip on the ground, speed too fast, inadequate braking, the
type of machine is unsuitable for its task, lack of awareness
of the ground conditions, incorrect hitching and load
distribution.
1. Mow up and down slopes, not across.
2. Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
3. Choose a slow speed so that you will not have to stop or
change speeds while on the slope.
4. Do not mow on wet grass. Tires may loose traction.
5. Always keep unit in gear especially when traveling down
slopes. Do not shift to neutral and coast downhill.
6. Avoid starting, stopping, or turning on a slope. If tires
lose traction, disengage the blade(s) and proceed
slowly straight down the slope.
7. Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction, which
could cause the machine to rollover.
8. Use extra care while operating machines with grass
catchers or other attachments; they can affect the
stability of the unit. Do not use on steep slopes.
Not for
Reproduction
6
Operator Safety
SERVICE AND MAINTENANCE
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where there
is an open flame, spark, or pilot light such as near a
water heater or other appliance.
6. Never fill containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on the
ground away from your vehicle before filling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possible,
then refuel such equipment on a trailer with a portable
container, rather than from a gasoline dispenser nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing
immediately.
10. Never over-fill the fuel tank. Replace gas cap and
tighten securely.
11. Use extra care in handling gasoline and other fuels.
They are flammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
13. Replace all fuel tank caps and fuel container caps
securely.
WARNING
Never operate on slopes greater than 17.6 percent (10°)
which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet
(607 cm) horizontally.
When operating on slopes use additional wheel weights
or counterweights. See your dealer/retailer to determine
which weights are available and appropriate for your
unit.
Select slow ground speed before driving onto slope.
In addition to front weights, use extra caution when
operating on slopes with rear-mounted grass catchers.
Mow UP and DOWN the slope, never across the face,
use caution when changing directions and DO NOT
START OR STOP ON SLOPE.
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the mowing activity. Never assume that children will
remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) off. They
may fall off and be seriously injured or interfere with
safe unit operation. Children who have been given rides
in the past may suddenly appear in the mowing area
for another ride and be run over or backed over by the
machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and Air
Index information on the engine emissions label.
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
ICES-002.
Not for
Reproduction
7
en
Operator Safety
Service & Maintenance
1. Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
2. Keep nuts and bolts, especially blade attachment bolts,
tight and keep equipment in good condition.
3. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
4. Keep unit free of grass, leaves, or other debris build-up.
Clean up oil or fuel spillage. and remove any fuelsoaked
debris. Allow machine to cool before storage.
5. If you strike an object, stop and inspect the machine.
Repair, if necessary, before restarting.
6. Never make adjustments or repairs with the engine
running.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s
recommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing them.
9. Check brake operation frequently. Adjust and service as
required.
10. Maintain or replace safety and instructions labels, as
necessary.
11. Do not remove the fuel filter when the engine is hot
as spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses firmly over the filter after installation.
12. Do not use gasoline containing METHANOL, gasohol
containing more than 10% ETHANOL, gasoline
additives, or white gas because engine/fuel system
damage could result.
13. If the fuel tank must be drained, it should be drained
outdoors.
14. Replace faulty silencers/mufflers.
15. Use only factory authorized replacement parts when
making repairs.
16. Always comply with factory specifications on all settings
and adjustments.
17. Only authorized service locations should be utilized for
major service and repair requirements.
18. Never attempt to make major repairs on this unit
unless you have been properly trained. Improper
service procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.
19. On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
20. Do not change engine governor settings or over-speed
the engine. Operating the engine at excessive speed
can increase the hazard of personal injury.
21. Disengage drive attachments, stop the engine, remove
the key, and disconnect the spark plug wire(s) before:
clearing attachment blockages and chutes, performing
service work, striking an object, or if the unit vibrates
abnormally. After striking an object, inspect the machine
for damage and make repairs before restarting and
operating the equipment.
22. Never place hands near the moving parts, such as a
hydro pump cooling fan, when the tractor is running.
(Hydro pump cooling fans are typically located on top of
the transaxle).
23. Units with hydraulic pumps, hoses, or motors:
WARNING: Hydraulic fluid escaping under pressure
may have sufficient force to penetrate skin and cause
serious injury. If foreign fluid is injected into the skin
it must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene may
result. Keep body and hands away from pin holes or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, and not hands, to search for
leaks. Make sure all hydraulic fluid connections are tight
and all hydraulic hoses and lines are in good condition
before applying pressure to the system. If leaks occur,
have the unit serviced immediately by your authorized
dealer.
24. WARNING: Stored energy device. Improper release of
springs can result in serious personal injury. Springs
should be removed by an authorized technician.
25. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily injury
from hot coolant or steam blow-out, never attempt to
remove the radiator cap while the engine is running.
Stop the engine and wait until it is cool. Even then, use
extreme care when removing the cap.
Not for
Reproduction
8
Safety Decals
All DANGER, WARNING, CAUTION and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below are
on your rider and mower.
If any of these decals are lost or damaged, replace them at
once. See your local dealer for replacements.
These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.
Safety Icons
WARNING: Read Operator’s
Manual.
Read and understand the Operator’s
Manual before using this machine.
DANGER: Thrown Objects.
This machine is capable of throwing
objects and debris. Keep bystanders
away.
WARNING: Remove Key Before
Servicing.
Remove the key and consult technical
literature before performing repairs or
maintenance.
DANGER: Machine Rollover.
Do not use this machine on slopes
greater than 10°.
DANGER: Dismemberment.
This machine can amputate limbs.
Keep bystanders and children away
when engine is running.
DANGER: Dismemberment.
This mower deck can amputate limbs.
Keep hands and feet away from
blades.
DANGER: Fire Hazard.
Do not add fuel while engine is hot or
running. Stop engine and allow to cool
for 3 minutes prior to adding fuel.
DANGER: Hot Surface.
Allow machine to cool before touching
this area.
DANGER: Carbon Monoxide
Poisoning.
Do not operate the engine in an
unventilated area.
WARNING: Fire hazard.
Keep children, open flames and
sparks away from the battery, which
could ignite explosive gases.
WARNING: Sulfuric acid can cause
blindness or severe burns.
Always wear safety goggles or a face
shield when working on or near a
battery.
WARNING: Batteries produce
explosive gases.
Read and understand the Operator’s
Manual before using this machine.
IMPORTANT: Do not discard a
battery in the trash.
Contact local authorities for disposal
and/or recycling of batteries.
Safety Decals
Not for
Reproduction
9
en
Safety Decals
Ignition Switch Positions,
Part No. 1722806
Transmission Release,
Part No. 1730202
Attachment Lift,
Part No. 1730264
Fuel Level,
Part No. 1730172
1730264
Decal Locations
Operating Instructions, CE Models,
Part No. 1734027
CE-Danger,
Rotating Blades,
Part No. 1720389
CE-Danger,
Rotating Blades,
Part No. 1720389
Not for
Reproduction
10
Features & Controls
Control Functions - Figure 1
The information below briefly describes the function
of individual controls. Starting, stopping, driving, and
mowing require the combined use of several controls
applied in specific sequences. To learn what combination
and sequence of controls to use for various tasks see the
OPERATION section.
Throttle/Choke Control (Choke-A-Matic)
The throttle/choke controls the engine speed and
choke. Move the throttle/choke control to the FAST
position to increase engine speed and SLOW posi-
tion to decrease engine speed. Always operate at
full throttle. Move the throttle/choke control to the
CHOKE position for starting a cold engine. A warm
engine may not require choking.
Brake Pedal
Depressing the brake pedal applies the tractor
brake.
Parking Brake
The parking brake knob is used to lock the parking
brake when the tractor is stopped. Fully depressing
the brake pedal and pulling up on the knob engages
the parking brake.
Fuel Tank
To remove the cap, turn counterclockwise.
Power Outlet (Select Models)
The power outlet is 12V-DC. Accessory must be
rated at 9 amps or less.
Fuel Level Gauge
Displays the fuel level in the tank.
Headlights
The light switch turns the tractor headlights on and
off.
Hour Meter (Select Models)
The hour meter measures the number of hours the
key has been in the RUN position.
Reverse Mowing Option (RMO)
The Reverse Mowing Option allows for mowing (or
use of other PTO driven attachments) while traveling
in reverse. If you choose to mow in reverse, turn
the RMO key after the PTO is engaged. The L.E.D.
light will illuminate, and the operator can then mow
in reverse. Each time the PTO is engaged the RMO
needs to be reactivated if desired.
Figure 1
PTO Switch
The PTO (Power Take-Off) switch engages and
disengages attachments that use the PTO. To
engage the PTO, pull UP on the switch. Push
DOWN to disengage. Note that the operator must
be seated firmly in the tractor seat for the PTO to
function.
Ignition Switch
The ignition switch starts and stops the engine, it
has three positions:
OFF
Stops the engine and shuts
off the electrical system.
RUN
Allows the engine to run
and powers the electrical
system.
START
Cranks the engine for
startin
NOTE: Never leave the ignition switch in the RUN position with
the engine stopped–this drains the battery
Not for
Reproduction
11
en
Features & Controls
Ground Speed Pedals
The tractor’s forward ground speed is controlled
by the forward ground speed control pedal. The
tractor’s reverse ground speed is controlled by the
reverse ground speed control pedal.
Depressing either pedal will increase ground speed.
Note that the further down the pedal is depressed,
the faster the tractor will travel.
Cruise Control
The cruise control is used to lock the ground speed
control in forward. The cruise control has five lock
positions.
Mower Height of Cut Adjustment
The mower cutting height adjustment lever controls
the mower cutting height. The mower cutting height
can be set to one of seven positions between 1-1/4”
and 4” (3,2 cm and 10,2 cm).
Seat Adjustment Lever
The seat can be adjusted forward and back. Move
the lever, position the seat as desired, and release
the lever to lock the seat into position.
Transmission Release Valve Lever
The transmission release valve lever deactivates the
transmission so that the tractor can be pushed by
hand. See PUSHING THE TRACTOR BY HAND for
operational information.
Parking Brake Function
Applying the Parking Brake - See Figure 2. To lock the
parking brake, release the ground speed pedals (A), fully
depress the brake pedal (B), pull UP on the parking brake
knob (C), and then release brake pedal.
Releasing the Parking Brake - See Figure 2. To release
the parking brake, depress the brake pedal (B).
E
F
C
D
A
B
Figure 2
Cruise Control Operation
To Engage:
1. Pull up on the cruise control knob (D, Figure 2).
2. Depress the forward ground speed pedal (A).
3. Lift up the Cruise control knob (D) when desired
speed is reached. The Cruise will lock in one of its
five locking positions.
To Disengage:
1. Depress the brake pedal (B).
OR
2. Depress the forward ground speed pedal (A).
Hourmeter (Select Models)
The hour meter (E, Figure 2) measures the number of
hours the key has been in the RUN position.
12 Volt Power Outlet (Select Models)
The 12-volt accessory plug is located in the left side pod
(F, Figure 2). It can be used to power small electronic
devices. The accessory must be rated at 9 amps or
less.
NOTE: Operating a 12-volt accessory, especially with
the engine at idle, may cause battery discharge. When
not using the accessory plug it must be covered with the
rubber plug to prevent moisture from causing a short
circuit. Entrance of water into plug can cause a short
circuit.
Not for
Reproduction
12
Operation
Adding Fuel
WARNING
Gasoline is highly flammable and must be handled with
care. Never fill the tank when the engine is still hot from
recent operation. Do not allow open flame, smoking or
matches in the area. Avoid over-filling and wipe up any
spills.
Do not use gasoline containing METHANOL,
gasohol containing more than 10% ETHANOL,
gasoline additives, or white gas because
engine/fuel system damage could result.
1. Remove the fuel cap (A, Figure 3).
2. Fill the tank. Do not overfill. Leave room in the tank
for fuel expansion. Refer to your engine manual for
specific fuel recommendations.
3. Install and hand tighten the fuel cap.
A
Figure 3
Safety Interlock System Tests
This unit is equipped with safety interlock switches and
other safety devices. These safety systems are present for
your safety: do not attempt to bypass safety switches, and
never tamper with safety devices.
WARNING
If the unit does not pass a safety test, do not operate it.
See an authorized dealer.
Test 1 — Engine should NOT crank if:
• PTOswitchisON,OR
• BrakepedalisNOTfullydepressed(parkingbrake
OFF), OR
• ThecruisecontrolleverisNOTinNEUTRAL.
Test 2 — Engine SHOULD crank and start if:
• Operatorissittinginseat,AND.
• PTOswitchisOFF,AND
• Brakepedalisfullydepressed(parkingbrakeON),
AND
• ThecruisecontrolleverisinNEUTRAL.
Test 3 — Engine should SHUT OFF if:
• Operatorrisesoffseat.
Test 4 — Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
complete stop within five seconds after electric PTO switch
is turned OFF. If mower drive belt does not stop within five
seconds, see an authorized dealer.
Test 5 — Reverse Mow Option (RMO) Check
• Engineshouldshutoffifreversetravelisattemptedif
the PTO has been switched on and RMO has not been
activated.
• RMOlightshouldilluminatewhenRMOhasbeen
activated.
Not for
Reproduction
13
en
Operation
WARNING
The engine will shut off if the reverse ground speed
pedal is depressed while the PTO is on and the RMO
has not been activated. The operator should always turn
the PTO off prior to driving across on roads, paths or any
area that maybe used by other vehicles. Sudden loss of
drive could create a hazard.
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not alert to
the presence of children. Never activate RMO if children
are present. Children are often attracted to the unit and
the mowing activity.
Starting the Engine (Choke-A-Matic)
1. Sit in the seat and lift UP the seat adjustment lever,
position the seat as desired, and release the lever to
lock the seat in position.
2. Fully depress the brake pedal or set the parking brake
with pedal fully depressed, pull UP on parking brake
knob, then release pedal.
3. Disengage PTO switch by pushing IN.
4. Move the throttle/choke control to the CHOKE position.
5. Insert the ignition key and turn clockwise to the START
position and release the key as soon as the engine
starts.
6. After the engine starts, move the throttle/choke control
to half speed. Warm up the engine by running it for at
least 30 seconds.
7. Set throttle/choke control to the FAST position.
NOTE: In the event of an emergency, the engine can
be stopped by turning the ignition switch to STOP.
For normal engine shut down, follow the procedure in
“Stopping the Tractor & Engine.”
Stopping the Tractor & Engine
1. Return the ground speed control(s) to NEUTRAL.
2. Disengage the PTO and wait for all moving parts to
stop.
3. Move the throttle/choke control to the SLOW position
and turn the ignition key to OFF. Remove the key.
Driving the Tractor
1. Sit in the seat and adjust the seat so that you can
comfortably reach all the controls and see the
dashboard display.
2. Engage the parking brake.
3. Make sure the PTO switch is disengaged.
4. Start the engine (see STARTING THE ENGINE).
5. Disengage the parking brake and release the brake
pedal.
6. Depress the forward ground speed control pedal to
travel forward. Release the pedal to stop. Note that
the further down the pedal is depressed the faster the
tractor will travel.
7. Stop the tractor by releasing the ground speed control
pedals, setting the parking brake, and stopping
the engine (see STOPPING THE TRACTOR AND
ENGINE).
Mowing
1. Set the mower cutting height to the desired level and
set the gauge wheels to the appropriate position (if
equipped).
2. Engage the parking brake. Make sure the PTO switch is
disengaged.
3. Start the engine (see STARTING THE ENGINE).
4. Set the throttle/choke control to the FAST position.
5. Engage the PTO (Mower Deck).
6. Begin mowing.
7. When finished, shut off the PTO and raise the mower
using the attachment lift control lever.
8. Stop the engine (see STOPPING THE TRACTOR AND
ENGINE).
Mowing in Reverse
If an operator chooses to mow in reverse, the RMO system
can be used. To use the Reverse Mowing Option (RMO)
turn the RMO key after the PTO is engaged. The L.E.D.
light will illuminate, and the operator can then mow in
reverse. Each time the PTO is engaged the RMO needs
to be reactivated if desired. The key should be removed to
restrict access to the RMO feature.
Not for
Reproduction
14
Operation
Attachment Operation in Reverse
If an operator chooses to operate a PTO driven attachment
in reverse, the RMO system can be used. To use the
Reverse Mowing Option (RMO) turn the RMO key after
the PTO is engaged. The L.E.D. light will illuminate, and
the operator can then operate the attachment in reverse.
Each time the PTO is disengaged the RMO needs to be
reactivated if desired. The key should be removed to
restrict access to the RMO feature.
Pushing the Tractor by Hand
1. Disengage the PTO and turn the engine off.
2. Pull the transmission release (A, Figure 4) back
approximately 2-3/8” (6 cm) to lock into released
position.
3. The tractor can now be pushed by hand.
DO NOT TOW TRACTOR
Towing the unit will cause transmission
damage.
•Donotuseanothervehicletopushorpullthisunit.
•Donotactuatethetransmissionreleasevalvelever
while the engine is running.
A
Figure 4
Adjusting Mower Cutting Height
The cutting height lift lever (A, Figure 5) controls the mower
cutting height. The cutting height is has seven positions
between approximately 1-1/4” and 4” (3,2 cm and 10,2 cm).
A
Figure 5
Not for
Reproduction
15
en
Operation
Storage
WARNING
Never store the unit (with fuel) in an enclosed, poorly
ventilated structure. Fuel vapors can travel to an ignition
source (such as a furnace, water heater, etc.) and cause
an explosion. Fuel vapor is also toxic to humans and
animals.
Before you store your unit for the off-season, read the
Maintenance and Storage instructions in the Safety Rules
section, then perform the following steps:
• DisengagethePTO,settheparkingbrake,&remove
the key.
• Performenginemaintenanceandstoragemeasures
listed in the engine owner’s manual. This includes
draining the fuel system, or adding stabilizer to the fuel
(do not store a fueled unit in an enclosed structure - see
warning).
• Batterylifewillbeincreasedifitisremoved,putina
cool, dry place and fully charged about once a month.
If the battery is left in the unit, disconnect the negative
cable.
Before starting the unit after it has been stored:
• Checkallfluidlevels.Checkallmaintenanceitems.
• Performallrecommendedchecksandprocedures
found in the engine owner’s manual.
• Allowtheenginetowarmupforseveralminutesbefore
use.
Attaching a Trailer
The maximum horizontal drawbar force allowed is
280 Newton. The maximum vertical drawbar force is
160 Newton. This equates to a 250 lbs (113 kg) trailer on
a 10 degree hill. Secure the trailer with an appropriately
sized clevis pin (A, Figure 6) and clip (B).
B
A
Figure 6
Not for
Reproduction
16
Maintenance
Maintenance Chart
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check mower blade stopping time
Check tractor and mower for loose hardware
Check tire pressure
Every 50 Hours or Annually *
Check tractor brakes
Clean battery and cables
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil filter
Annually
Replace air filter
Replace pre-cleaner
See Dealer Annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Check Tire Pressure
Tire Pressure should be checked periodically, and
maintained at the levels shown in the chart (Figure 7).
Note that these pressures may differ slightly from the
“Max Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
Size PSI bar
20 x 8,0-8 10 0,68
15 x 6,0-6 12-14 0,82-0,96
Figure 7
Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
complete stop within five seconds after the electric PTO
switch is turned off.
1. With tractor in neutral, PTO disengaged and operator in
seat, start the engine.
2. Look over the left-hand footrest at the mower drive belt.
Engage the PTO and wait several seconds. Disengage
the PTO and check the amount of time it takes for the
mower drive belt to stop.
3. If mower drive belt does not stop within five seconds,
see your dealer.
Not for
Reproduction
17
en
Maintenance
Cleaning the Battery and Cables
WARNING
When removing or installing battery cables, disconnect the
negative cable FIRST and reconnect it LAST. If not done in
this order, the positive terminal can be shorted to the frame
by a tool.
1. Disconnect the cables from the battery, negative cables
first (A, Figure 8) then the cover & positive cables (B).
2. Loosen the wingnut & washer (D).
3. Pivot the hold-down rod (C) up and away from battery.
Secure to steering tower.
4. Remove the battery (E).
5. Clean the battery compartment with a solution of baking
soda and water.
6. Clean the battery terminals and cable ends with a wire
brush and battery terminal cleaner until shiny.
7. Reinstall the battery (E) in the battery compartment.
Secure with the battery hold-down rod (C) and wingnut
& washer (D).
8. Re-attach the battery cables, positive cables and cover
first (B) then the negative cables (A).
9. Coat the cable ends and battery terminals with
petroleum jelly or non-conducting grease.
A
D
B
C
E
Figure 8
Seat Adjustment
The seat can be adjusted forward and back. Move the
lever (A, Figure 9), position the seat as desired, and
release the lever to lock the seat into position.
A
Figure 9
Battery Charging
WARNING
Keep open flames and sparks away from the battery; the
gasses coming from it are highly explosive. Ventilate the
battery well during charging.
A dead battery or one too weak to start the engine may
be the result of a defect in the charging system or other
electrical component. If there is any doubt about the cause
of the problem, see your dealer. If you need to replace
the battery, follow the steps under Cleaning the Battery &
Cables.
To charge the battery, follow the instructions provided by
the battery charger manufacturer as well as all warnings
included in the safety rules sections of this book. Charge
the battery until fully charged. Do not charge at a rate
higher than 10 amps.
Not for
Reproduction
18
Maintenance
Gauge Wheels
The mower gauge wheels can be placed in two positions
depending on the height of cut. When using higher cutting
heights, set the wheels in the lower position. When using
lower cutting heights, set the wheels in the upper position.
Do not allow wheels to remain on the ground constantly
while mowing. To adjust:
1. Remove the locknut (B, Figure 10), gauge wheel (C),
washers (D), and shoulder bolt (E). Change position of
gauge wheel to desired height.
2. Insert shoulder bolt (E) through washers (D) gauge
wheel (C), and gauge wheel bracket (A). Secure with
locknut (B). Repeat steps 1 & 2 for all gauge wheels.
C
B
A
D
E
Figure 10
Not for
Reproduction
19
en
Troubleshooting
Troubleshooting the Tractor
PROBLEM LOOK FOR REMEDY
Engine will not turnover
or start.
Brake pedal not depressed. Fully depress brake pedal.
PTO (electric clutch) switch is in
ON position.
Place in OFF position.
Cruise control engaged. Move knob to NEUTRAL/OFF position.
Out of fuel. If engine is hot, allow it to cool, then refill the fuel tank.
Engine flooded. Disengage the choke.
Fuse is blown. See authorized dealer.
Battery terminals require cleaning. See Cleaning the Battery and Cables section.
Battery discharged or dead. Recharge or replace battery.
Wiring loose or broken.
Visually check wiring. If wires are frayed or broken, see
authorized dealer.
Solenoid or starter motor faulty. See authorized dealer.
Safety interlock switch faulty. See authorized dealer.
Water in fuel. See authorized dealer.
Gas is old or stale. See authorized dealer.
Engine starts hard or
runs poorly.
Fuel mixture too rich. Clean air filter.
Engine has other problem. See authorized dealer.
Engine knocks.
Low oil level. Check/add oil as required.
Using wrong grade oil. See Oil Recommendations Chart.
Excessive oil
consumption.
Engine running too hot. See authorized dealer.
Using wrong grade oil. See Oil Recommendations Chart.
Too much oil in crankcase. Drain excess oil.
Engine exhaust is
black.
Dirty air filter. See Engine Manual.
Choke closed. Open choke.
Engine runs, but tractor
will not drive.
Ground speed control pedals not
depressed.
Depress pedals.
Transmission release lever in
PUSH position.
Move into DRIVE position.
Parking brake is engaged. Disengage parking brake.
Traction drive belt is broken or
slipping.
See authorized dealer.
Not for
Reproduction
20
Troubleshooting
Troubleshooting the Tractor (Continued)
PROBLEM LOOK FOR REMEDY
Brake will not hold. Internal brake worn. See authorized dealer.
Tractor steers hard or
handles poorly.
Steering linkage is loose. See authorized dealer.
Improper tire inflation. See Check Tire Pressure section.
Front wheel spindle bearings dry. See authorized dealer.
Troubleshooting the Mower
PROBLEM LOOK FOR REMEDY
Mower will not raise.
Lift linkage not properly attached
or damaged.
See authorized dealer.
Mower cut is uneven.
Mower not leveled properly. See authorized dealer.
Tractor tires not properly inflated. See Check Tire Pressure section.
Mower cut is rough
looking.
Engine speed too slow. Set to full throttle.
Ground speed too fast. Slow down.
Mower has other problem. See authorized dealer.
Engine stalls easily
with mower engaged.
Engine speed too slow. Set to full throttle.
Ground speed to fast. Slow down.
Dirty or clogged air filter. See Engine Manual.
Cutting height set too low. Cut tall grass at maximum cutting height during first pass.
Engine not up to operating
temperature.
Run engine for several minutes to warm-up.
Starting mower in tall grass. Start the mower in a cleared area.
Excessive mower
vibration.
Mower has other problem. See authorized dealer.
Engine runs and tractor
drives, but mower will
not drive.
PTO not engaged. Engage the PTO.
Mower has other problem. See authorized dealer.
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144

Simplicity 1695146 Manuale utente

Categoria
Tosa erba
Tipo
Manuale utente
Questo manuale è adatto anche per