9 880 101 01/2013
880-12 / 880-14 // 881-12 / 881-14
Instruction Manual
Translation of the original instructions
Cut-off machine
A
ttention!
Before first commissioning, read these operating
instructions thoroughly and observe the safety
provisions under all circumstances!
en
ENGLISH 1
Instruction manual cut-off machines 880-12 / 880-14 // 881-12 / 881-14
Translation of the original instructions
Dear customer
thank
you for purchasing this quality product from
our company.
For many decades, we have been a producer of
hand
-held and back-carried gas powered motor
devices. Each of our motor devices benefits from
this experience in detail today as well.
State
-of-the-art
production materials in connection
with our know
-how warrant a long service life and
high utilisation value of the motor device.
The motor devices of this model line are
particularly high
-quality cut-off machines of
German production and designed specifica
lly for
the high demands of professional users. A newly
developed single
-cylinder two-stroke high-
performance
engine with stationary nikasil-coated
cylinder in proven four
-channel technology for
great performance at low fuel consumption and
the latest exha
ust cleaning technology warrant
high utilisation value of the motor
-driven device.
Maintenance-free electronic ignition,
health
-protecting anti-vibration system,
patented twin
-pipe suction procedure,
vibration system for particularly easy interim
emptying of the air filter during work,
optionally usable water connection with water
supply to the cutting disc to reduce dust when
working,
smart solutions with electronic carburettor control
for simple starting and
ergonomic design and extremely compact build
ensure excellent operating comfort and facilitate
daily work with the motor device.
The safety equipment corresponds to the latest
state of the art and meets all nationally and
internationally
relevant safety provisions. Among
others, it comprises:
•
One-touch stop button
•
Throttle control lock
•
Electronic speed limiter
•
Protective device for the cutting disc
•
Motor stop facility for maintenance purposes
Before first commissioning, read these operating instructions thoroughly and always
observe all safety provisions and instructions for action.
If you have any further questions after reading these operating instructions, contact your
specialist vendor.
Observe the maintenance guidelines closely to ensure the long service life of your
equipment
ENGLISH 2
Packaging and disposal
Please keep the original packaging in order to protect the equipment against transport damage in case
you ever need to ship or transport it If the packaging materials are no longer required they must be
disposed of properly in accordance with applicable local regulations. Cardboard packaging materials are
raw materials which can be recycled or reused.
At the end of the equipment’s service life, please make sure that you dispose of it in accordance with the
local provisions
Patents
The following patents have been granted:
• PCT/EP2011067574 (separate lubrication)
• US20120152200 (airbox)
• US20100206278
• US20100000846
• US20090007435
• EP2011594
• EP2011991
• EP2011992
Registered brands and trademarks
solo
®
and iLube
®
are registered brands of SOLO Kleinmotoren GmbH.
Any other product and company names named in these operating instructions may be registered brands or
trademarks of the respective manufacturer. Use of these names by third parties for their purposes may
injure the rights of the manufacturer. The fact that the ® or ™ sign is missing does not mean that the
designation is a free brand name.
Reservation of changes
In the interest of continuous further development of our motor devices, we must reserve changes to the
delivery scope in form, technology and equipment. For that reason, no claims can be accepted with
reference to text and illustrations in this manual.
Table of Contents
ENGLISH 3
1 Information about these operating instructions ............................................................................... 4
1.1 Notational conventions used in the operating instructions ............................................................ 4
2 Warning, instruction and notice icons ............................................................................................... 4
3 Safety provisions ................................................................................................................................. 6
3.1 Correct use .................................................................................................................................... 6
3.2 General safety notes ..................................................................................................................... 6
3.3 Prescribed work clothing / PPE (Personal Protection Equipment) ................................................ 7
3.4 When fuelling up ........................................................................................................................... 8
3.5 In transport .................................................................................................................................... 8
3.6 During assembly, cleaning, maintenance and repair .................................................................... 9
3.7 Before start-up .............................................................................................................................. 9
3.8 When starting ................................................................................................................................ 9
3.9 During work ................................................................................................................................. 10
4 Power tool description ...................................................................................................................... 11
4.1 Technical data ............................................................................................................................. 11
4.2 Scope of delivery ......................................................................................................................... 12
4.3 Device views and important operating and function parts ........................................................... 12
4.4 Throttle control lock and throttle control ...................................................................................... 14
4.5 Function parts for starting ........................................................................................................... 14
4.6 Type plate ................................................................................................................................... 15
5 Preparing for use ............................................................................................................................... 16
5.1 Installing the cutting discs ........................................................................................................... 16
5.2 Installing cutting discs with 1" inner bore .................................................................................... 17
5.3 Uninstalling the cutting disc ......................................................................................................... 17
5.4 Adjusting protective cowl ............................................................................................................. 18
5.5 Fuelling up ................................................................................................................................... 18
5.6 Adjusting the ribbed belt tension ................................................................................................. 20
5.7 Water connection for wet cutting ................................................................................................. 20
5.8 Relocate cutting device from centre position to outer position .................................................... 21
5.9 Initial commissioning / run-in behaviour ...................................................................................... 23
6 Starting up and switching off the engine ........................................................................................ 24
6.1 Starting process .......................................................................................................................... 24
6.2 Start-up position .......................................................................................................................... 25
6.3 Switching on the engine .............................................................................................................. 25
6.4 Switching off the engine .............................................................................................................. 25
7 Power tool use ................................................................................................................................... 26
7.1
Cutting discs ................................................................................................................................ 26
7.2 Permissible cutting area and danger from kickback or drawing along ........................................ 27
7.3 Working behaviour and working technique ................................................................................. 28
7.4 Cutting metal ............................................................................................................................... 28
7.5 Cutting mineral materials ............................................................................................................ 29
8 Operating and maintenance notes ................................................................................................... 30
8.1 Cleaning and care ....................................................................................................................... 30
8.2 Cleaning the screen filter insert of the connection piece ............................................................. 31
8.3 Idle/carburettor adjustment ......................................................................................................... 32
8.4 Air filter maintenance .................................................................................................................. 33
8.5 Spark plugs check and replacement if required .......................................................................... 34
8.6 Ribbed belt replacement ............................................................................................................. 35
8.7 Fuel filter replacement ................................................................................................................. 36
8.8 Maintenance plan ........................................................................................................................ 37
8.9 Self-aid advice ............................................................................................................................. 38
8.10 Shutting down and storage ......................................................................................................... 39
9 Warranty ............................................................................................................................................. 40
10 Wear parts .......................................................................................................................................... 40
11 EC Declaration of conformity ........................................................................................................... 40
Table of Contents
Information about these operating instructions
ENGLISH 4
These operating instructions are an integral part of the motor device.
They contain important information and instructions for handling the motor device. Always follow
any specified safety regulations and instructions, as they are a prerequisite for ensuring that you
are working safely with the equipment.
These operating instructions must be kept available at the place of use of the equipment at all
times, and they must be read carefully by everybody who works on or with the equipment (including
for maintenance, care and repairs).
These operating instructions must only be used as operating instructions for the motor device 880/881.
Any utilisation of the contents (text and graphics illustrations) – even in excerpts – without our prior written
consent shall be forbidden and may be prosecuted.
Text highlights
Xxxxx Underlined text marks interim headlines.
Xxxxx Text in italics marks advice and notes that facilitate use of the motor device for the user.
1 Xxxxx Numbered text with a black background marks main chapter headlines.
1.1 Xxxx Numbered text with a grey background marks main subchapter headlines.
Xxxxxxx Frames mark especially highlighted sections.
Structure
The operating instructions are structured by numbered main and subchapters. The table of contents on
page 3 shows an overview of the structure.
Header
To make it easier for the user to find the chapters, the header names the main chapter to which the
content on the respective page belongs.
Pictures and diagrams
Some graphical illustrations in these operating instructions are schematic illustrations or principle
illustrations and may not show exactly your device model. The conveyed contents, however, are binding in
any case.
Important: If one or several icons in these operating instructions are centred and directly below a
chapter header the notice applies for the entire chapter.
1 Information about these operating instructions
1.1 Notational conventions used in the operating instructions
2 Warning, instruction and notice icons
Warning, instruction and notice icons
ENGLISH 5
Warning, instruction and notice icons used in the operating instructions and on the equipment:
Danger! Failure to comply with the instructions could cause accidents with potentially life-
threatening injuries
Caution! Failure to comply with the instructions could result in damage to the equipment or other
material damage
Carefully read the operating instructions. This applies before taking the equipment into operation
and before any cleaning, maintenance or assembly work.
Always wear the prescribed clothing. è Chap. 3.3, page 7
Always wear sturdy shoes with good grip.
Wear safety gloves. This applies to all work with or on the equipment
Before starting the engine, put on helmet, ear defenders and a visor.
Switch off the engine!
Smoking is prohibited anywhere near the power tool and in the location where it is refuelled!
Keep the power tool and fuel canisters away from naked flames.
Attention: Danger of poisoning! - The power tool generates exhaust gases.
- Petrol vapours are toxic.
- Dangerous dust emissions when working.
Attention: Kickback!
Notes in chap. 7.2 as of page 27 must be observed under all circumstances!
Attention: Danger of fire from sparks.
Wear breathing protection.
Do not use circular saw blades.
Never continue work with damaged cutting discs.
Only use cutting discs approved for a speed of ≥ 4,450 min
-1
[4,450 rpm].
Vibrator dial for interim emptying of the air filter. è Chap. 8.4, page 33
Noise level L
WA
= 110 dB(A).
iLube
®
= Smart lubrication (separate lubrication, model 881-12 and 881-14)
Fuel tank. è Chap. 5.5, as of page 18
Oil tank (green cap, model 881-12 and 881-14) è Chap. 5.5, as of page 18
Starting notes. è Chap. 6, as of page 24
Safety provisions
ENGLISH 6
This power tool must only be used to cut/shorten metals (hot cut) and mineral materials, such as concrete
(cold cutting), each with the cutting discs approved for this material and only for the working situation
indicated in chap. 7 on page 26.
For specifically trained users in rescue missions, other approved cutting discs are also offered that can be
used to cut various composites. These special applications are only permitted to specifically trained users.
This power tool must only be used for outdoor work.
Use of this power tool for any other purpose, such as sawing of wood and to remove/grind off a material
with the side surfaces of the cutting disc is forbidden. Impermissible cutting tools, such as saw blades or
knives, must not be installed at the motor device instead of the cutting disc.
Before first commissioning, read these operating instructions thoroughly and keep them safely. They must
be kept available at the place of use of the equipment at all times, and they must be read by everybody
who works on or with the equipment (including for maintenance, care and repairs).
Use this power tool with special care. Work with and at the power tool comprises extreme risks when
proceeding carelessly and improperly. They are specifically based on the high speeds of the cutting disc
and the large forces and torques that the power tool can achieve.
Work with and at the power tool always must be performed carefully and with the greatest care towards all
possible dangers and any possible situations that may occur. Never perform any work processes that you
are not ready for or the risks of which you cannot entirely asses. If you are still unsure after studying these
operating instructions, ask a specialist for help.
The ignition unit of this power tool generates an electromagnetic field in operation. This field may affect the
function of pacers under certain conditions. Persons with a pacer must consult their physician and the
pacer manufacturer before using this power tool.
General information on vibrations: The following symptoms may occur in case of special personal
conditioning, caused by frequent vibration at fingers, hands or wrists: The body parts falling asleep,
tickling, pain, stabbing, changes of the skin tone or skin. If such symptoms are found, see a physician.
Non-observance of the safety notes may be potentially fatal. Comply with the accident prevention
provisions of the professional associations.
• For any accidents that may occur, a first aid kit must be present at the workplace at all times. Material
that has been removed must be refilled at once.
• Danger of fire from sparks! When working close to easily flammable objects or vegetation, a fire
extinguisher must be provided.
• If you are working with this kind of power tool for the first time, have secure handling shown and
explained to you by a specialist.
• Children and teens below 18 years of age must not work with this power tool; this does not include
youths older than 16 who are trained under supervision.
• The power tool generally must be operated by a person – also when starting up. Keep persons and
animals away from the work area. If a person or animal approaches, the power tool must be stopped at
once. The user is responsible for any injury and property damage he causes.
• This power tool must only be lent or passed on to persons who are familiar with this type, its operation
and the operating instructions. Always include these operating instructions.
• Only work with this power tool when you are in good shape, rested and healthy.
• Persons under the influence of alcohol or drugs, including prescription drugs, are not allowed to use this
machine, as their ability to quickly react to potential danger may be impaired.
3 Safety provisions
3.1 Correct use
3.2 General safety notes
Safety provisions
ENGLISH 7
• If materials that may contain asbestos or other toxic substances are to be processed, inform the relevant
authority first. Work must only be performed upon approval and only under supervision and compliance
with the required safety measures.
• When cutting pre-tensioned and steel-reinforced concrete pillars, observe all instructions and standards
that the respective authorities or component manufacturers have stipulated. Cutting of reinforcement
bars must be performed in the prescribed order and under consideration of the relevant safety
provisions.
• Never alter, change or modify any safety equipment or functional assemblies of this machine.
• Danger of accidents! Only use this machine if it is in good, safe condition! Always check the machine
prior to use.
• Only use those accessories and attachments that have been supplied by us and that are expressly
approved for attachment to this machine. Only cutting discs approved for this machine must be used as
cutting tools.
• Reliable operation and safety of this machine also depend on the quality of the spare parts used. Use
only genuine spare parts. Original spare parts are identical with genuine production parts and guarantee
best quality in material, dimensions, function and safety. Original parts and accessories are available
from your specialist dealer. Your dealer has been supplied with appropriate documentation to determine
the correct parts. Your dealer is frequently supplied with updates about improvements to the equipment.
Please note that the use of non-original parts will void your warranty.
• Always store the machine in a safe place and in such a way that it will not pose any danger. Stop the
engine. Never let the machine run unsupervised!
Persons who disregard safety instructions, operating or maintenance instructions are liable for any
damage or consequential losses.
In order to prevent injuries, please make sure that you wear the prescribed clothing and protective
equipment.
Clothes should be tight-fitting (no lapels), but not hindering.
When performing any work, wear a working suit of firm materials with sufficient flame inhibition that
cannot inflame by sparks flying (materials of leather, cotton after flame-inhibiting treatment or heavy
close-meshed linen fabrics).
Check the information in the work clothes and ensure that no easily flammable materials and no easily
melting materials like polyester or nylon are contained in the clothes. The working clothes must never be
contaminated with flammable substances such as petrol or similar.
Never wear scarves, ties, jewellery or other clothes that may get caught in the cutting disc, at objects in
the environment or the power tool. Tie back long hair and secure it under a helmet.
Wear a protective helmet during any work.
Use personal hearing protection.
Eye/face protection is mandatory pursuant to ANSI Z 87.1.
Wear firm safety shoes with steel toes and a good grip.
Wear protective gloves with non-slip palms.
Use breathing protection for dry cutting as protection from dust.
3.3 Prescribed work clothing / PPE (Personal Protection Equipment)
Safety provisions
ENGLISH 8
Petrol is highly flammable. Keep distance from open fire and do not spill fuel. Do not smoke at the
workplace or at the site of fuelling!
• Always switch off the engine before fuelling.
• Danger of fire! Never refuel with the engine still hot!
• Always carefully open the tank cap so that any overpressure present can reduce slowly and no fuel will
splash out.
• Prevent skin and eye contact with mineral oil products. In case of eye contact, rinse at once with lots of
clear water. In case of persistent irritation, see a doctor immediately!
• Regularly change and clean protective clothes.
• Avoid breathing in fuel vapour.
• The refuelling site should be well ventilated.
• Avoid any soil spillage of fuel or oil (protection of the environment). Use a suitable mat.
• Immediately clean any spilled fuel on the machine. Change contaminated clothing without delay.
• Always tighten the fuel tank cap firmly by hand without using any tools. Tank caps are equipped with an
overturning protection and must be turned closed until a clear "skipping".
The fuel tank cap must not be able to work itself loose as a result of the vibrations of the engine.
• Danger to life from burns! Observe leaks. Do not start up and work when fuel is escaping.
• Fuels and oil must only be stored in properly and correctly labelled containers.
• Before carrying the power tool (even across short distances from one working area to the next), always
switch off the engine and wait until the cutting disc has stopped. Carry the power tool by the top handle
and have the cutting disc point backwards.
• Danger of burns! Do not touch the hot muffler.
• Never carry or transport the power tool with the cutting disc running.
• To avoid spilling of fuel and oil and to prevent damage, the power tool must be secured against tipping
when transporting it in vehicles. Check the tanks for fuel and oil for tightness.
Recommendation: Empty the tanks before transport.
• Empty the tanks before shipping.
Advice: Keep the original packaging in order to protect the equipment against transport damage in case
you ever need to ship it or transport it.
3.4 When fuelling up
3.5 In transport
Safety provisions
ENGLISH 9
• The power tool must not be assembled, maintained, repaired or stored in the vicinity of naked flames.
• Before assembly, cleaning, maintenance and repair, always turn off the engine; the stop dial must be set
to "0" and the cutting disc must have stopped.
Only the idle speed setting must be performed with the engine running.
• Wear protective gloves for any work.
• The power tool requires regular maintenance. Only perform such maintenance and repair work on your
own that are described in these operating instructions and that you consider yourself skilled for. Any
other work must only be performed by specialist workshops authorised by us.
• Danger of burns! Do not touch the muffler while it is still hot – not even for maintenance or to check it for
tight fit.
• Only perform repairs with original spare parts.
• Danger of accident and injury! No modifications are permitted at the power tool, because this may impair
safety!
Before any start, check the entire power tool for operationally safe condition. In addition to the notes in the
operating and maintenance notes (è chap. 8, page 30), check the following items:
• Stop dial and one-touch stop button must be easy to operate.
• The throttle control must move freely and return automatically to the idle position. It must not be possible
to operate the throttle control without pushing (unlocking) the throttle control lock (throttle control
locked).
• The cutting disc must be attached firmly to the spindle.
• Danger of fire! Ignition cable and spark plug connector must be firmly in place. Loose connection can
result in sparks which could ignite any escaping fuel/air mixture!
• In case of irregularities, recognisable damage, improper settings or limited function, the power tool must
not be started. In such cases, have the power tool inspected by specialist workshops authorised by us.
• Only use the power tool if it is in completely assembled condition.
• Keep at least 3 metres [approx. 10 feet] distance from the fuelling site when starting. Never start the
machine in closed rooms.
• Observe secure and firm hold when starting up. Always start up on level ground and securely hold the
power tool.
Perform the starting process as described in chap. 6 on page 24.
• Check the idle setting after starting. The cutting disc must stand still in idle mode.
3.6 During assembly, cleaning, maintenance and repair
3.7 Before start-up
3.8 When starting
Safety provisions
ENGLISH 10
In addition to the safety provisions already listed, the following safety provisions also apply when working
with the motor device:
• Danger of poisoning! Once the engine is running, the power tool produces toxic exhaust that may be
invisible and odourless. Never start the power tool in closed rooms. Special danger also applies in
narrow situations, troughs or ditches. Only work here when it is absolutely certain that there is sufficient
air exchange and that no toxic gases may accumulate.
• Increased danger of fire! Do not smoke at the workplace – not even in the proximity of the power tool.
• Secure the workplace against accidental access by third parties, e.g. with warning signs. Only persons
involved and wearing protective clothes must be present within 30 metres [approx. 30 yards] around the
working area.
• Check the site of deployment for possible dangers.
– Spark formation during cutting means that work must never be performed close to potentially
explosive gases of liquids, or easily flammable objects.
– No electrical lines must be placed in the area to be cut.
– Objects that may fall off or topple over during work must be secured or removed from the working
environment first.
– Prepare the workplace so that secure backing away is possible.
• The work piece to be cut must be free of foreign bodies such as screws, nails or stones.
• When working in residential areas, observe the noise protection provisions.
• Work carefully, considerately and calmly and do not endanger any other persons.
– Ensure good sight and light conditions.
– Always remain within calling distance of other persons who may administer first aid in emergencies.
– Put in working breaks in time.
– Be attentive towards possible danger sources and take the corresponding preventive measures.
Consider that use of hearing protection limits perception of sounds. Signal sounds, calls, etc. that
announce danger may also be missed.
– Observe tripping dangers and obstacles. Never work on unstable undergrounds.
– Always hold on to the power tool with both hands and always ensure a safe and firm stance.
– Never cut standing on a ladder.
– Guide the power tool so that no body part is located in the extended swivel range of the cutting disc.
– Only process the work piece to be cut with the cutting disc running; never touch the floor or other
objects with the cutting disc running.
– Do not use the power tool to lever off and shovel away objects.
• Switch off the engine when the power tool starts to behave noticeably differently.
• Danger of burns! Do not touch the muffler while it is still hot.
Danger of fire! Muffler radiates enormous heat. Never put the hot power tool into dry grass or on
flammable objects.
• Danger of hearing damage and burns!
Never work with defective muffler or without muffler.
3.9 During work
Power tool description
ENGLISH 11
Model
880-12
881-12
880-14
881-14
Motor
Single-cylinder two-stroke motor, four-channel flushing
Engine capacity
81 cm
3
[4.94 cu.in]
Bore Ø / stroke
52 mm / 38 mm [2.0" / 1.5"]
Max. power at rpm
4.0 kW / 9,300
1
/
min
[5.36 HP / 9,300 rpm]
Max. torque at rpm
4.8 Nm / 7,000
1
/
min
[3.54 ft·lbf / 7,000 rpm]
Max. permissible speed
(9,500 ±200)
1
/
min
[(9,500 ±200) rpm]
(no load with cutting disc)
Idling speed
(2,600 ±200)
1
/
min
[(2,600 ±200) rpm]
Clutch engagement speed
(4,000 ±200)
1
/
min
[(4,000 ±200) rpm]
Fuel tank capacity
0.9 l [30 oz]
Oil tank capacity
---
0.32 l
[10.8 oz]
---
0.32 l
[10.8 oz]
Fuel mix ratio oil:petrol
1:50
---
1:50
---
Electronically controlled separate lubrication
---
ü
---
ü
Fuel consumption at max. power (ISO 7293)
1.75 kg/h [3.86 lbs/h]
Specific consumption at max. power (ISO 7293)
460 g/kWh [0.76 lbs/HP·h]
Carburettor, with primer
Position-independent, electronically controlled
Air filter
Paper
Ignition
Electronic digital ignition with index
Cutting disc: Diameter
Bore diameter
Tightening torque of the attachment screw
12" [305 mm]
20 mm or 1"
(30 ±2) Nm
[22.1 ±1.48 ft·lbf]
14" [356 mm]
20 mm or 1"
(30 ±2) Nm
[22.1 ±1.48 ft·lbf]
Minimum flange outer diameter
100 mm [3.9"]
100 mm [3.9"]
Spindle diameter
20 mm [0.787"]
20 mm [0.787"]
Maximum spindle rpm
4,450
1
/
min
[4,450 rpm]
4,450
1
/
min
[4,450 rpm]
Cutting depth, max.
100 mm [3.9"]
125 mm [4.9"]
Dimensions: height / width / length
430 mm / 267 mm /
750 mm
[16.9" / 10.5" / 29.5"]
430 mm / 267 mm /
775 mm
[16.9" / 10.5" / 30.5"]
Weight without tank content, without cutting disc
10.1 kg
[22.3 lbs]
10.4 kg
[22.9 lbs]
10.2 kg
[22.5 lbs]
10.5 kg
[23.1 lbs]
Sound level
1,2
L
Peq
(EN ISO 19432 Annex B)
98 dB(A)
Sound power level
1,2
L
Weq
(EN ISO 19432 Annex B)
108 dB(A)
Weighted effective acceleration
1,3
a
hv,eq
(EN ISO 19432 Annex C): rear handle / top handle
4.5 m/s
2
/ 6.0 m/s
2
[177 "/s
2
/ 236 "/s
2
]
1
In determining the following values regarding the acceleration of vibrations and sound, the different operating
conditions were weighted in accordance with the current standards.
2
Insecurity K purs. to EC directive 2006/42/EC: 2.5 dB(A)
3
Insecurity K purs. to EC directive 2006/42/EC: 2 m/s
2
[78.7 "/s
2
]
4 Power tool description
4.1 Technical data
Power tool description
ENGLISH 12
• Basic device
• Cutting disc
• Spindle adapter disc for cutting discs with 1" inner bore
• Tool: Combination tool (spark plug spanner with screwdriver), blocking pin and additional small
screwdriver
• These operating instructions (incl. EC Declaration of conformity: è Chap. 11, page 40)
1. Cutting disc
16. Starter handle
2. Protective cowl
17. Stop dial / one-touch stop button
3. Handle for protective cowl adjustment
18. Fuel tank cap
4. Top handle
19*. Oil tank cap, green (only for 881-12 and 881-14)
5. Cowl
20. Primer
6. Rear handle
21. Decompression valve
7. Twin-pipe intake openings
22. Idle stop screw "T"
8. Spark plug cover
23. Carburettor adjustment screws "L" and "H"
(for specialist workshops only)
9. Throttle control lock
24. Water coupling connection (wet cutting)
10. Throttle control
25. Muffler (exhaust)
11. Cutting disc attachment screw
26. Standing base
12. Cutting disc blockage opening
27. Screen filter coupling adapter of the water supply line
13. Ribbed belt tensioning screw
28. Valve lever for water supply
14. Ribbed belt cover
29. Vibration dial
15. Type plate
30. Water supply line (wet cutting)
31. Starter and fan housing with cooling air openings
4.2 Scope of delivery
4.3 Device views and important operating and function parts
* model-dependent
View: Profile right
12
6
9
10
17
5
29
8
4
21
2
3
1
14
13
30
26
27
24
15
28
Power tool description
ENGLISH 13
View: Rear
9
19*
18
7
20
17
4
3
2
24
15
6
View: Front left
30
1
11
21
8
5
4
16
25
26
2
View: Profile left
19*
10
3
2
21
8
16
5
17
9
6
11
22
23
18
1
31
Power tool description
ENGLISH 14
Release of the throttle control (10)
•
Grasp rear handle (6) with the right hand. The
throttle control lock (9) is operated with the palm.
è The throttle control (10) is released.
Starter handle (16) and starter rope; è Chap. 6.3, page 25
Primer (20)
In the delivery condition, after extended resting
tim
e and with the tank completely empty, there is
no fuel yet in the carburettor after fuelling up.
Starting process:
è Chap. 6.1, page 24
To facilitate the starting process, fuel can be
pumped in
to the carburettor. Push the primer (20)
repeatedly until fuel appears in the primer.
Excess fuel is automatically flushed back into the
tank from the primer.
Decompression valve (21)
When the decompression valve (21) is depressed,
the compression pressure in the combustion
chamber is reduced. This means that the engine
offers less resistance during start
-up, which makes
it noticeably easier to start t
he engine.
Starting process:
è Chap. 6.1, page 24
The decompression val
ve is closed automatically
when the motor is running.
If you need to pull the starter handle
(16
) more than
once to start the engine (e.g. during a cold start),
you do not need to depress the decompression
valve again.
4.4 Throttle control lock and throttle control
4.5 Function parts for starting
10
9
6
20
16
21
Power tool description
ENGLISH 15
a: Type designation
b: Serial number
c: Bar code
d: Year of build
4.6 Type plate
d
a
b
c
Preparing for use
ENGLISH 16
The cutting discs used must correspond to the specifications from chap. 7.1 on page 26!
The power tool spindle is designed for cutting discs with an inner bore of 20 mm.
Cutting discs with 1" inner bores must only be installed together with the spindle adapter disc.
Installation of cutting discs with 1" inner bore: è Chap. 5.2, page 17!
When using cutting discs with an inner bore of 20 mm, no additional spindle adapter disc is
required.
• For cutting disc installation, the power tool must be put securely on the ground. Securely hold the power
tool at the top handle with the left hand and push it firmly onto the ground. è Chap. 5.4, page 18
• Insert blocking pin (a) entirely into the cutting disc blocking opening (12) to block the spindle. Screw out
cutting disc attachment screw (11). Remove disc (b) and pressure disc (c).
The rotating direction of the cutting disc is always
as indicated by the arrow above – independently of
whether the cutting device is installed in the centre
or outer position.
• Put cutting disc (1) on spindle.
For cutting discs with specified rotating direction (arrow on the cutting disc), observe correct alignment
of the cutting disc during assembly (for rotation direction of the cutting disc, see above).
• Push on pressure disc (c) so that the curved side points southwards, i.e. away from the cutting disc.
5 Preparing for use
5.1 Installing the cutting discs
c
11
b
a
12
1
11
b
c
Rotating direction
of the cutting disc
Preparing for use
ENGLISH 17
• Push on disc (b) and turn in cutting disc attachment screw (11).
• Insert blocking pin (a) entirely into the blocking opening (12) and firmly tighten (30 Nm [22.1 ft·lbf]) the
cutting disc attachment screw (11).
Securely hold the power tool at the top handle with one hand and push it firmly onto the ground.
• Remove the blocking pin (a).
The power tool's spindle is designed for cutting discs with an inner bore of 20 mm.
For proper installation of cutting discs with a 1" inner bore, the spindle adapter disc is required that
is included with the delivery of the power tool.
The spindle adapter disc ensures correct fit of the 1" cutting disc on the spindle.
• Installation of cutting discs with 1" inner bore
takes place according to chap. 5.1 as of page 16.
•
After applying the cutting disc on the spindle,
however, the spindle adapter disc (e) must be
put on the spindle (f) additionally.
•
Put the spindle adapter disc (e) onto the spindle
so that it inserts between spindle and inner bore
of the cutting disc.
The support area of the spindle adapter disc
must point outwards in the installed condition, i.e.
away from the spindle.
The correct orientation of the spindle adapter
disc is mandatory to directly connect the plane
inner area to of the pressure disc to the cutting
disc. Only this warrants secure attachment of the
cutting disc.
•
Application of the pressure disc and all following
steps must be performed again according to
chap. 5.1.
• For cutting disc uninstallation, the power tool must be put securely on the ground. Securely hold the
power tool at the top handle with the left hand and push it firmly onto the ground. è Chap. 5.4, page 18
• Insert blocking pin (a) entirely into the cutting disc blocking opening (12) to block the spindle. Screw out
cutting disc attachment screw (11). Remove disc (b) and pressure disc (c) (also see chap. 5.1).
• Remove cutting disc from the spindle. For cutting discs with a 1" inner bore, the spindle adapter disc
also must be removed from the spindle.
• Put the pressure disc back onto the spindle so that the curved side points outward.
• Put on disc (b) and turn in the cutting disc attachment screw (11) again. è Chap. 5.1.
• Insert blocking pin (a) entirely into the blocking opening (12) and firmly tighten (30 Nm [22.1 ft·lbf]) the
cutting disc attachment screw (11) again.
Securely hold the power tool at the top handle with one hand and push it firmly onto the ground.
• Remove the blocking pin (a).
5.2 Installing cutting discs with 1" inner bore
5.3 Uninstalling the cutting disc
e
f
Preparing for use
ENGLISH 18
The protective cowl (2) can be swivelled forward
and backward in a limited area.
For adjustment of the protective cowl, the power
tool must be put securely on the g
round. Securely
hold the power tool at the
top handle (4) with the
left hand and push it firmly onto the ground. With
the right hand at the
handle for protective cowl
adjustment
(3), swivel the protective cowl
accordingly.
To keep sparks
and particles torn out in cutting
away from the user, the protective cowl always
must be swivelled forward as far as the working
situation permits.
If the separating device has been installed in the outer position, ensure when adjusting the
protective cowl that the water supply line is not clamped and that contact between the cutting disc
and water supply line in operation is excluded.
Danger to health!
Direct skin contact with petrol and breathing in of petrol fumes must be excluded.
The high-performance two-stroke engine of this power tool requires an oil-petrol mix in the combustion
chamber (oil and petrol = fuel mix).
Models 880-12 and 880-14
Models 880-12 and 880-14 are equipped with a fuel
tank
(18).
Fuel tank for fuel mix according to the mix
table below.
Unsuitable fuels or deviations of the mix ratio
may cause engine damage!
The fuel mix must be formed from
the following
components:
•
Lead-free regular petrol or lead-free super petrol
(octane number ≥92 RON)
•
Branded 2-stroke engine oil co
rresponding to the
standard ISO-L-EGD or JASO FD
We recommend the "SOLO Profi 2-stroke engine oil" offered by us at a mixing ratio of oil:petrol of
1:50 (2 %).
Store the fuel mix no longer than for 3 weeks.
5.4 Adjusting protective cowl
5.5 Fuelling up
4
3
2
18
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
Solo 881-12 Manuale utente
- Tipo
- Manuale utente
in altre lingue
- English: Solo 881-12 User manual