Agria 1600 Manuale del proprietario

Tipo
Manuale del proprietario
Before commissioning the machine, read operating
instructions and observe warnings and safety instructions.
Operating Instructions No.
998 778 10.10
5823, 5822
&
Petrol Engine
Diesel Engine
Power HoePower Hoe
Power HoePower Hoe
Power Hoe
1600 Farmstar premium1600 Farmstar premium
1600 Farmstar premium1600 Farmstar premium
1600 Farmstar premium
OriginalOriginal
OriginalOriginal
Original
OperatingOperating
OperatingOperating
Operating
InstructionsInstructions
InstructionsInstructions
Instructions
2 agria Power Hoe Farmstar premium 1600
Symbols, Name Plate
Please complete:
Machine Type No.: ......................
Identification No.:
.........................................................
Engine Type: ............................
Engine No.: ................................
Date of Purchase: .....................
For name plate, refer to p3/fig.A/27,
or to p54/fig C/27.
For engine type and number, refer to
p3/fig. B/6
or p54/fig. D/6.
Please state these data when
ordering spare parts to avoid wrong
deliveries.
Only use original agria spare parts!
Specifications, figures, and dimensi-
ons stated in these instructions are
not binding. No claims can be derived
from them. We reserve the right for
improvements without changing the-
se instructions.
Amount of delivery:
l
Operating instructions
l
Power hoe
l
Extension guard till 90 cm
l
Depth bar
l
Tool kit
l
Handlebar with tool box and
tommy nut
Symbols
Warning – Danger
Important information
Choke
Fuel
Oil
Engine Start
Engine Stop
Stop
Air filter
Visual check
Clutch
Hoeing drive
Forward
Reverse
Slow
Open
Closed
è - Serviceç= please
contact Your specialised agria
workshop
agria Power Hoe Farmstar premium 1600 3
Designation of Parts
Petrol Engine Version
Figure A
Figure B
1
2
3
4
5
6 7
10 9
11
12
13
14
15
16
17
18
2223
21
4 agria Power Hoe Farmstar premium 1600
Designation of Parts
Petrol Engine Version
Figure A
15 Locking pin of depth bar
16 Depth bar
17 Extension guard
18 Guard discs
19 Add-on hoeing tools
20 Base hoeing tools
21 Hoeing guard
22 Front hitch
23 Support/engine guard
24 Transmission oil filling opening
25 Transmission oil control plug
26 Transmission oil drain plug
27 Name plate (machine
identification number)
28 Rear hitch
Figure B
1 Air filter
2 Carburetor
3 Fuel tank cap
4 Fuel tank
5 Choke lever
6 Engine type number
7 Starter handle
8 Cooling-air screen
9 Exhaust with guard
10 Spark plug, spark plug connector
11 Engine oil filling plug and dip stick
12 Engine oil drain plug
13 Fuel tap
1 Engine
2 Handlebar joint
3 Tommy nut for handlebar
adjustment
4 Handlebar
5 Tool box
6 Speed control lever
7 Engine shut-off switch
8 Safety circuit lever
9 Clutch lever
10 Pawl of clutch lever
11 Gear shift lever
12 Gear shift gate
13 Cover
14 Leg of depth bar
agria Power Hoe Farmstar premium 1600 5
Index
3
5
6
2
1
4
Amount of delivery.........................2
Symbols, Name Plate....................2
Designation of Parts .......3, 54
Recommendations
Lubricants, Anti-Corrosive Agents 6
Maintenance and Repair ...............6
Fuel ................................................7
Unpacking and Assembly ....8
1. Safety Instructions......9–13
2. Specifications
Dimensions ..................................14
Power Hoe ...................................14
Engine....................................15, 16
Noise Level ............................15, 16
Vibration Acceleration Value..15, 16
Operation on Slopes..............15, 16
3. Devices and Operating
Elements
Engine..........................................17
Safety Circuit Function ..........18, 20
Clutch...........................................21
Gear Shifting................................21
Steering Handle...........................21
Hoeing Tools ........................ 22 - 23
Depth Bar.....................................24
Front Support Wheel ...................25
4. Commissioning and
Operation
Commissioning the Machine
(Petrol Engine Version) ................26
Starting the Petrol Engine .............. 27
Shutting off the Petrol Engine ........ 28
Commissioning the Machine
(Diesel Engine Version) .................. 29
Starting the Diesel Engine.............. 30
Shutting off the Diesel Engine........ 31
Hoeing...................................... 32 - 33
End of Operation ............................ 34
5. Maintenance
Petrol Engine ........................... 35 - 39
Diesel Engine .......................... 40 - 43
Machine .......................................... 44
Adjusting the Clutch Lever ............. 45
Safety Circuit Function ................... 46
General ........................................... 46
Cleaning.......................................... 46
Storage ........................................... 47
Varnishes,
and Wear Parts ....................... 48
6. Troubleshooting...........49 - 51
Lubrication Chart ................... 51
Electrical Wiring ..................... 51
Inspection and
Maintenance Chart................. 52
Conformity Declaration ......... 55
Note fold-out pages!
Figures A and B
(Petrol Engine Version) ............ 3
Figures C and D
(Diesel Engine Version) ......... 54
6 agria Power Hoe Farmstar premium 1600
Recommendations
Lubricants and
Anti-Corrosive Agents
Use the specified lubricants for engine
and gearbox (see “Specifications”).
We recommend using bio-lubricating
oil or bio-lubricating grease for “open”
lubricating points or nipples (as
specified in the operating instructions).
We recommend using bio-slushing oil
for preservation of machines and imple-
ments (do not apply on painted exter-
nal covers). Oil can be brushed or
sprayed on.
Anti-corrosive agents are environmen-
tally friendly and degrade fast.
Using ecologically safe bio-lubricants
and bio-anti-corrosives, you contribute
to environmental protection and to the
wellbeing of humans, animals and
plants.
Maintenance and
Repair
The trained mechanics of your agria
workshop carry out expert maintenance
and repair.
You should only carry out major
maintenance work and repairs on your
own, if you have the proper tools and
knowledge of machines and internal
combustion engines.
Do not hammer against the flywheel with
a hard object or metal tools as it might
crack and shatter in operation causing
injuries and damage. Only use suitable
tools for pulling the flywheel.
agria Power Hoe Farmstar premium 1600 7
Fuel Recommendations
Petrol Engine
This petrol engine runs smoothly on
commercial unleaded regular and
supergrade petrol as well as on leaded
supergrade petrol.
Do not add oil to petrol.
If, for environmental reasons, you use
unleaded petrol, make sure the fuel is
drained completely when shutting down
the engine for more than 30 days. This
is to prevent resin residue from
depositing in the caburetor, fuel filter,
and tank. Or add a fuel stabilizer.
For further instructions refer to “Engine
Preservation”.
Diesel Engine
This Diesel engine runs on conventional
Diesel fuel of a min. cetane rating of 45.
Do not use Diesel fuel oil substitutes,
they may be harmful to the fuel system.
Fuel should be free of water or dust.
Winter operation:
To ensure reliable winter operation use
“winter diesel fuel”, to be purchased at
filling stations.
At outside temperatures of below
-15°C , take the following additional
precautions:
add commercial flow conditioners
or
add paraffine oil to depress diesel pour-
point:
Paraffine winter summer
oil: diesel diesel
fuel fuel
pour-point
50% app. -31°C app. -25°C
30% app. -26°C app. -15°C
10% app. -20°C app. - 9°C
As a last resort, you can add up to 30%
of regular petrol to avoid paraffine
deposits. However, this has negative
effects on consumption rate and
performance.
8 agria Power Hoe Farmstar premium 1600
Unpacking and Assembly
Open the top of the
cardboard box.
Remove screw (2)
together with washer (3).
l
Place the toothed ring on
the handle (4) onto the
toothed ring of the steering
bar joint (2). Fit tommy nut
(3) together with washer and
tighten it. Make sure that
Bowden cables and electric
cables are routed in such a
way that they are not get
crushed or damaged.
l
Attach all cables and
electric lines to the
handlebars using the
retaining clips.
l
Take the machine out of
the box or cut the box open
on all 4 corners and fold
down the sides to remove
the machine.
l
Fit the hoeing tools and
hoeing guards.
l
Carry out all steps for
starting-up.
23
24
agria Power Hoe Farmstar premium 1600 9
1. Safety Instructions
1
Before starting the machine, read the
operating instructions and note:
Warning
This symbol marks all paragraphs in
these operating instructions which affect
your safety. Pass all safety instructions
on to other users and operators.
Due Use
The power hoe is a hand-controlled
automatic single-axle machine. Pro-
pulsion is achieved using the hoe tools
approved by the manufacturer. The
power hoe is intended for use in turning
over the ground in landscape gardening
(including the leisure sector). The area
to be covered must be in line with the
usual size of such areas in landscape
gardening. (Due use)
Any other type of operation is
considered undue. The manufacturer is
not liable for any damages resulting from
undue use, for which the risk lies with
the user alone.
The power hoe is not intended for use
on such areas as vary stony or rocky
ground or as a tree-stump milling
machine.
Due use includes compliance with
manufacturer’s instructions on
operation, maintenance and repair.
Any unauthorized changes to the power
hoe/multi-purpose machine render
manufacturer liability null and void.
General Instructions on
Safety and Accident
Prevention
Basic Rule:
The respective national accident
prevention regulations have to be
adhered to, as well as all other generally
accepted rules governing operational
safety, occupational health and road
traffic regulations.
When driving on public roads, you have
to observe the current traffic code.
Accordingly, check the multi-purpose
machine for road and operational safety
each time you take up operation.
Only persons familiar with the machine
and instructed on the hazards of
operation are allowed to use, maintain
and repair the machine.
Teenagers younger than 16 years are
not allowed to operate the machine!
Only work in good light and visibility.
Operator’s clothes should fit tight. Avoid
wearing loose fitting clothes. Wear so-
lid shoes.
Note the warning and instruction signs
on the machine for safe operation.
Compliance is for your own safety.
When transporting the machine on
vehicles or trailers outside the area to
be cultivated, ensure that the engine is
turned off.
Careful with rotating tools – keep at a
safe distance!
Beware of coasting tools. Before you
start any maintenance or repair on them,
wait until tools have come to a complete
stop.
10 agria Power Hoe Farmstar premium 1600
1. Safety Instructions
1
Foreign powered parts shear and crush!
Riding on the attachment during
operation is not permitted.
Mounted or trailed attachments and
loads/weights affect the machine’s
driving, steering, braking, and tipping
characteristics. Therefore, ensure that
steering and braking functions are
sufficient. Match operating speed to
conditions.
Do not alter the governor settings. High
engine speed increases risk of
accidents.
Working Area and Dangerous Area
The user is liable for third parties staying
within the machine’s working range.
Staying in the hazardous area is not
permitted.
Check the immediate surroundings of
the machine before you start it. Watch
out for children and animals.
Before you start work, clear the area
from any foreign object. During
operation, always watch out for further
objects and remove them in time.
For operation in enclosed areas, ensure
that a safety distance is kept to
enclosures to prevent damage to tools.
Operation and
Safety Devices
Before You Start the Engine
Become familiar with the devices and
operating elements and their functions.
Above all, learn how to turn the engine
off quickly and safely in an emergency.
Ensure that all guards are mounted and
positioned to provide protection.
With no attachment mounted, make
sure PTO-shaft is covered with the cap.
Starting the Engine
Do not start engine in closed rooms. The
carbon monoxide contained in the
exhaust fume is extremely toxic when
inhaled.
Before you start the engine, move all
controls to neutral or idling speed.
When starting the engine, do not step
in front of the machine and the
attachment.
Do not use assist-starting liquids when
using electrical assist-starting devices
(jumper cable). Danger of explosion!
Operation
Never leave the operator’s position at
the steering handle while the machine
is at work.
Never adjust the handles during work –
danger!
During operation keep a distance to the
machine as defined by the length of the
steering handle, especially not when
you turn the machine.
Riding on the attachment during
operation or in transport is not permitted.
In case of blockages in the attachment,
turn off the engine and clean the
attachment with an appropriate tool.
In case of damage to the machine or
the attachment, immediately turn off the
engine and have it repaired.
If steering causes problems,
immediately bring the machine to a halt
and turn it off. Have the malfunction
repaired without delay.
agria Power Hoe Farmstar premium 1600 11
1. Safety Instructions
1
To prevent the machine from slipping on
slopes make sure it is secured by
another person using a bar or a rope.
This person must be located at a higher
position than the vehicle at a safe
distance from the attachment at work.
If possible, always work across the
slope.
End of Operation
Never leave the machine unattended
with the engine running.
Before you leave the machine, turn off
the engine. Then close fuel taps.
Secure machine against unauthorized
use. If the machine is equipped with an
ignition key, remove the key. On other
versions, remove the spark plug
connector.
Attachments
Only mount attachments with the engine
and PTO switched off.
Always use appropriate tools and wear
gloves when changing attachments and
parts thereof.
For mounting and dismounting
attachments bring the stands into pro-
per position and ensure stability.
Secure the base machine and
attachments against rolling off (parking
brake, wheel chocks).
Beware of injuries while coupling
attachments.
Linkage attachments as specified and
only couple at specified points.
Secure base machine and attachment
against unauthorized use and rolling off
when you leave the machine. If
necessary, install transport or protective
devices and secure.
Hoeing
Adjust the hoeing guards in such a way
that only the tools that penetrate the soil
are not covered.
When hoeing, make sure the depth bar
is adjusted properly.
Weigths
Always fit weights properly and at the
locations specified.
Maintenance
Do not maintain or clean the machine
while the engine is running.
Before you work on the engine, always
remove the spark plug connector.
Check regularly and, if necessary,
replace all guards and tools subject to
wear and tear.
Replace damaged cutting tools.
Always wear safety gloves and use pro-
per tools when exchanging cutting tools.
Do not carry out repairs like welding,
grinding, drilling, etc. on structural and
safety-relevant parts (e.g. steering han-
dle, coupling devices)!
Keep the base machine and the
attachment clean to avoid risk of fire.
Check nuts and bolts regularly for tight
fit and re-tighten, if necessary.
Ensure that you re-install all guards and
adjust them properly after maintenance
and cleaning.
12 agria Power Hoe Farmstar premium 1600
1. Safety Instructions
1
Only use original agria spare parts. All
other commercial spare parts must
correspond to quality and technical
requirements specified by agria.
Storage
It is not allowed to store the machine in
rooms with an open heating system.
Never park the machine in closed rooms
with fuel left in tank. Fuel vapours are
hazardous.
Engine, Fuel, and Oil
Never let the engine run in closed rooms.
Extreme danger of intoxication! For the
same reason, also replace damaged
exhaust pipes immediately.
Be careful when dealing with fuel. Great
danger of fire! Never refill fuel close to
open fire, inflammable sparks or hot
engine parts. Do not refill fuel in closed
rooms. Do not smoke when refilling!
Refill only with the engine switched off
and cooled down.
Do not spill any fuel, use a proper filling
device.
In case of fuel-spillage, pull the multi-
purpose machine away from the spillage
before you start the engine.
Make sure fuel is of specified quality.
Store fuel in approved cans only.
Store anti-corrosive agents and
stabilizing liquids out of reach of
children. If sickness and vomiting occur,
see a doctor. If the fuel has contacted
eyes, rinse them thoroughly, avoid
inhaling of vapours.
Read and observe enclosed
instructions.
Before you dispose of opened and
seemingly empty pressurised tins (e.g.
of assist-starting liquids) make sure they
are completely empty. Empty them in
ventilated places safe from spark
formation or flames. If necessary,
dispose of tins in hazardous waste
deposits.
Be careful when draining hot oil, danger
of burns.
Make sure oil used is of specified quality.
Storage is in approved cans only.
Dispose of oil, greases, and filters
seperately and properly.
Electrical System and Battery
When working on the electrical system,
make sure the battery is disconnected
(negative terminal) (if equipped).
Make sure to connect the battery
properly – first connect the positive
terminal and then negative terminal.
Disconnect in reverse order.
Be careful with battery gases – explosi-
ve!
Avoid spark discharge and open flames
near batteries.
Remove plastic cover (if equipped) to
recharge battery and to prevent highly
explosive gases from building up.
Careful when handling battery fluid!
Only use specified circuit breakers. If the
circuit breakers are too strong, they will
destroy the electrical system – danger
of fire.
Always cover the positive terminal with
the specified cover or terminal cap.
Persons having a pacemaker may not
touch live parts of the ignition system
when the engine is running.
agria Power Hoe Farmstar premium 1600 13
1. Safety Instructions
1
Explanation of
Warning Signs
Before any cleaning,
maintenance, and
repair work switch off
the engine and pull
spark plug connector.
With the engine
running, keep at a
safe distance from
cutting or hoeing
tools!
Do not work without
guards mounted.
Before starting the
engine, bring guards
in proper position!
With the engine
running, keep at a
safe distance from
knife!
Do not touch any
moving machinery
parts. Wait until they
have come to a
complete stop!
With the engine
running, keep at a
safe distance!
Signs
When working with the
machine, wear individual
protective ear plugs.
Wear protective gloves.
Wear solid shoes.
14 agria Power Hoe Farmstar premium 1600
2. Specifications
Power Hoe
Dimensions:
Dimensions in mm
Ø Hoeing tools ................310
a .......................................460
b .......................................590
c........................................265
d .......................................300
e .......................................300
f ........................................250
g .......................................630
h ...........................860…1090
k........................................810
l.......................................1420
A .............................520…980
22
Clutch:............................. bevel clutch
Gearbox:
3-speed mechanical gearbox
2 forward speeds and 1 reverse speed
Hoeing shaft is driven by the bevel
gearbox.
For ground speeds see table below
Transmission oil .......SAE 90-API GL5
Filling quantity.................. approx. 0.9l
Steering handle:........height and side
adjustable without tools
Weight: (without hoeing tools)
Petrol engine version ............. 53,5 kg
Diesel engine version ............ 63,5 kg
Gear Speed of hoeing tools
[rpm]
n
dw
I 87
II 157
R 41
agria Power Hoe Farmstar premium 1600 15
2
2. Specifications
Petrol Engine
Manufacturer: ..........................Honda
Engine type: .................GX200QHQ4
Version: ....................... Fan-air cooled
1-cylinder, 4-stroke
petrol ohv engine
Bore:........................................ 68 mm
Stroke:..................................... 54 mm
Cubic capacity: ................... 196 ccm
Compression ratio:................. 8.5 : 1
Output: .................................... 4.8 kW
at 3600 rpm
Max. torque:..........................13.2 Nm
at 2500 rpm
Spark plug: ................ NGK BPR 6ES
BOSCH WR 7 DC
Spark plug gap: ..............0.7…0.8 mm
Ignition system:
Contactless solenoid ignition, ignition
point is pre-set, radio remote
screened according to VDE 0879
Valve lash (engine cold):
Intake: ...................0.15mm ± 0.02mm
Outlet: ...................0.20mm ± 0.02mm
Starter:
Soft-pull recoil starter with mechanical
decompression facility
Fuel tank capacity: .................... 3.6 l
Fuel: .... Commercially available petrol
octane number min. 85 RON
(refer to fuel recommendations)
Air filter: ................... Oil bath air filter,
same type of oil used for engine
lubrication
Carburetor: .......... Throttle valve type
Mixture control screw:
opened approx. 2 1/8 turns in base
setting
Rated speed: ......................3600 rpm
Top no-load speed: ............3850 rpm
Idling speed:........... 1250…1600 rpm
Engine oil:
Filling quantity..................approx. 0.6 l
Multi-grade oil SAE 10 W-40
SG, SF or higher quality grade
Operability on slopes:
max ................................ < 20° (37 %)
(with oil level at “max” = upper level mark)
Noise level:
Noise level at operator’s ear 83.5 dBA
(In accordance with EN 709 and EN
1553)
Vibration acceleration value:
on handlebar:............. a
hw
= < 2.5 m/s
2
in accordance with EN 709 and EN 1033 at
85% of rated engine speed with tool at work.
16 agria Power Hoe Farmstar premium 1600
2. Specifications
2
Diesel Engine
Manufacturer: ........................ Yanmar
Type: ................................... L48AE-DI
Version: ....................... Fan-air-cooled
1-cylinder-4-stroke diesel engine
Bore: ........................................ 70 mm
Stroke:..................................... 55 mm
Cubic capacity: ................... 211 ccm
Output: ............... 3.5 kW at 3600 rpm
Max torque:......12.5 Nm at 2500 rpm
Injection pressure:................ 200 bar
Valve lash (engine cold)
Intake: ..........................0.15 -0.02 mm
Outlet: ..........................0.15 -0.02 mm
Starter: .................. Recoil starter with
mechanical decompression facility
Fuel: ................................. Diesel fuel,
Min. cetane rating: ...........................45
(refer to fuel recommendations)
Fuel filter:...........Paper filter cartridge
in fuel tank
Fuel tank capacity: ........approx. 2.5 l
Air filter: ....................Oil bath air filter
Filling quantity.. approx. 0.2l engine oil
Rated speed: ......................3600 rpm
Top no-load speed: ............3800 rpm
Lubrication: ....... Pressure lubrication
via gear pump
Full flow oil filter
Engine oil:
Filling quantity..................approx. 0.8 l
Multi-grade oil
at ambient temperature -15° to +45°C:
SAE 10W-40 API-SC (or higher)
at ambient temperature -25° to +15°C:
SAE 5W-20 API-SC (or higher)
Operability on slopes:
max ................................ < 20° (37 %)
(with oil level at “max” = upper level
mark)
Noise level:
Noise level
at operator’s ear.................... 90 dB(A)
Sound level: .....................103.5 dB(A)
(in accordance with EN 709 and
EN1553)
Vibration acceleration value:
on handlebar:............. a
hw
= < 7.1 m/s
2
in accordance with EN 709 and EN 1033
at 85% of rated engine speed with tool
at work.
agria Power Hoe Farmstar premium 1600 17
3. Devices and Operating Elements
3
3
The power hoe agria-Farmstar is a
motorised unit for turning over the
ground. Therefore it is most suitable for
normal use in landscape gardening.
Engine
l
The four-stroke petrol engine runs
on commercial petrol (refer to fuel
recommendations p7).
Ignition System
The engine is equipped with a
contactless ignition system. We
recommend to have necessary check-
ups done by an expert only.
l
The four-stroke diesel engine runs
on commercial diesel fuel (refer to fuel
recommendations p7). See to using pro-
per fuel in winter.
During the first 20 operating hours
(break-in period) do not use engine to
maximum power.
Even after break-in period never use
engine at higher speed than necessary
for the work in hand.
I
High engine speed is harm-
ful to any engine and consid-
erably affects its durability. This
applies especially for no load
operation. Any overspeed (have the
engine roar) can result in immediate
damage.
Cooling System
Cooling system is fan-cooled. Therefore
keep screen at recoil starter and cooling
fins of cylinders clean and free from
sucked-in plant trash.
Idling-speed
Always ensure that idling-speed is
adjusted correcty. At low speeds and
with the speed control lever set to idle,
the engine is supposed to run smoothly
and without run-out.
Air Filter
The air filter purifies the air intake. A
clogged filter reduces engine output.
Ignition System
The petrol engine is equipped with a
contactless ignition system. We
recommend to have necessary check-
ups done by an expert only.
18 agria Power Hoe Farmstar premium 1600
3. Devices and Operating Elements
Petrol Engine Version
3
Speed Control Lever
The speed control lever (A/6) on the steering
handle is for stepless setting of engine speed
from min. = idle to max. = full throttle.
Engine Shut-off Switch
The machine is equipped with an electric shut-
off switch (A/7). On pressing the switch, the
ignition is turned off (engine is shut off).
Position “I” = Operation
Position “0” = Engine off
I
The engine shut-off switch also
serves as an emergency shut-off.Set
the switch to “0” for fast shut-off.
Safety circuit
The machine is equipped with a safety circuit
lever.
Stop position: When releasing the lever
(A/8), the ignition system is shut off (engine
is off).
Beware – engine keeps running due to
centrifugal mass.
Start position: For starting the engine and
for short breaks, pull the clutch lever (A/9) and
fasten with pawl (A/10).
Operating position: To operate the
machine press safety circuit lever (A/8) down.
W
Do not tie down safety circuit lever.
I
The safety circuit lever also serves as
an emergency shut-off. In an
emergency, move the lever to position “STOP”,
the lever automatically goes to STOP position.
max
min
Stop
agria Power Hoe Farmstar premium 1600 19
3
3. Devices and Operating Elements
Petrol Engine Version
Choke
The choke lever (B/5) is on the
carburetor.
l
Close the choke for cold starts. To
do this, move the lever to the left.
l
Open the choke for warm starts and
operation. To do this, move the lever to
the right.
Fuel tap
The fuel tap (B/13) is on the carburetor.
l
Move the tap to the right to open it.
l
Move the tap to the left to close it.
20 agria Power Hoe Farmstar premium 1600
3. Devices and Operating Elements
Diesel Engine Version
3
Safety circuit
The machine is equipped with a safety
circuit lever (lever C/8).
Stop position: When releasing the
lever, the fuel injection pump is set to
“0” (engine is shut off). Beware – engine
keeps running due to centrifugal mass!
Start position: For starting the
engine and for short breaks, press the
safety circuit lever (C/8), pull the clutch
lever (C/9) and lock with pawl (C/10).
Operating position: For machine
operation, press safety circuit lever (C/
8).
W
Do not fasten safety circuit
lever.
I
The safety circuit lever also
serves to shut off the engine
in an emergency. Release the safety
circuit lever for fast engine shut-off. The
lever automatically goes to STOP
position.
Decompression
Activate decompression to start the
engine via the recoil starter. To do this,
fold down the decompression lever
(C/14).
As you pull the recoil starter, the
decompression lever will automatically
move back into its original position.
C/8
C/9
C/10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Agria 1600 Manuale del proprietario

Tipo
Manuale del proprietario

in altre lingue