Yamaha WX-030 Manuale del proprietario

G

En Fr De

OWNER'S MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Sv It Es

Nl

Ru

10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan

Published 07/2017 KS-C0

Printed in China

Manual Development Group

Yamaha Global Site

http://www.yamaha.com/

Yamaha Downloads

http://download.yamaha.com/

ZZ63570

i En

En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources,

vibration, dust, moisture and cold. For proper

ventilation, allow the following minimum clearances.

Top: 5 cm (2 in)

Rear: 5 cm (2 in)

Sides: 5 cm (2 in)

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot (or vice versa), and do not

locate this unit in an environment with high humidity

(i.e., a room with a humidifier) to prevent

condensation inside this unit, which may cause an

electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cable and outdoor antennas disconnected from a wall

outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press to set the unit to

off, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the unit off, then leave this unit

alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 Be sure to use the power cable supplied with this

unit. Using a power cable other than the one provided

may cause fire or damage to this unit.

◆ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off by . In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

• This unit’s speakers use magnets. Do not place items

that are sensitive to magnetism, such as CRT-type TVs,

clocks, credit cards, floppy disks, etc., on or beside this

unit.

• There is a chance that placing this unit too close to a

CRT-based (Braun tube) TV set might impair picture

color. Should this happen, move this unit away from the

TV set.

ii En

◆ Special Instructions for U.K.

Model

 About this manual

• “iPod” described in this manual may also refer to “iPhone”

or “iPad.”

• Illustrations may differ from actual item depicted.

• Symbols:

Indicates precautions for use of the unit and its

feature limitations.

Indicates supplementary explanations for better

use.

Indicates the corresponding reference page(s).

IMPORTANT

THE WIRES IN MAINS LEAD ARE

COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be

connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is

coloured BROWN must be connected to the

terminal which is marked with the letter L or

coloured RED.

Make sure that neither core is connected to the

earth terminal of the three pin plug.

Information for Users on Collection

and Disposal of Old Equipment

This symbol on the products, packaging,

and/or accompanying documents means

that used electrical and electronic products

should not be mixed with general

household waste.

For proper treatment, recovery and

recycling of old products, please take them

to applicable collection points, in

accordance with your national legislation

and the Directives 2002/96/EC.

By disposing of these products correctly,

you will help to save valuable resources

and prevent any potential negative effects

on human health and the environment

which could otherwise arise from

inappropriate waste handling.

For more information about collection and

recycling of old products, please contact

your local municipality, your waste

disposal service or the point of sale where

you purchased the items.

[Information on Disposal in other

Countries outside the European

Union]

This symbol is only valid in the European

Union. If you wish to discard these items,

please contact your local authorities or

dealer and ask for the correct method of

disposal.

If there should be color blotching or noise when

used near a TV, move this unit away from the TV

when using it.

Do not use this unit within 22 cm (9 inches) of

persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside

medical facilities.

The user shall not reverse engineer, decompile,

alter, translate or disassemble the software used in

this unit, whether in part or in whole. For

corporate users, employees of the corporation

itself as well as its business partners shall observe

the contractual bans stipulated within this clause.

If the stipulations of this clause and this contract

cannot be observed, the user shall immediately

discontinue using the software.

Note

y

☞

1 En

En

Smooth operation and wireless music playback using iPhone/Android

TM

devices

• By installing the free dedicated app “MusicCast CONTROLLER” on your iPhone/iPad/iPod touch or Android device, you

will be able to set up a network, make various settings, and select songs to play back. You can also use these devices as a

remote controller (☞ P.7).

• Equipped with Wi-Fi, which allows the unit to connect to the wireless router (access point) without any cables.

Plays various supported content with high quality sound

• Plays music from DLNA servers (☞ P.15), Internet radio, AirPlay and Bluetooth.

• Rich sound provided by the two-way speaker, large passive radiator, and DSP (Digital Signal Processor) developed by

Yam ah a.

• Enhanced treble and thick mid/bass sound, even when playing a compressed audio source, such as MP3. (Music Enhancer)

Supports streaming services

• You can enjoy music from a variety streaming services. (Supported music streaming services vary by the country or region of

use.)

Stereo Pair function

• You can enjoy stereo reproduction using two WX-030 units.

FEATURES

Plays music files in smartphones

via a network (using MusicCast

CONTROLLER app, DLNA servers,

Spotify), AirPlay (iPod), and

Bluetooth (Bluetooth device). Also

you can use your smartphone as a

remote controller.

Plays music from

Internet radio and on-

line streaming content.

Plays music files

in PCs and DLNA

servers.

WX-030

2 En

 INTRODUCTION

SUPPLIED ACCESSORIES ..................................2

PART NAME ..........................................................3

 PREPARATION

INSTALLATION .....................................................4

Mounting the unit on a wall ................................ 4

TURNING ON THE POWER ..................................5

CONNECTING TO THE NETWORK......................6

HOME AUDIO NETWORK WITH MusicCast .......7

Connecting to the network using MusicCast

CONTROLLER ..............................................7

 LISTENING TO THE MUSIC

LISTENING TO THE INTERNET RADIO...............9

LISTENING TO THE SONGS IN THE COMPUTER

AND NAS ...............................................................9

Setting the media sharing of music files.............9

PLAYING BACK MUSIC WITH AirPlay ..............10

Playback of iTunes/iPod music contents..........10

Clearing AirPlay ...............................................10

LISTENING TO MUSIC FROM YOUR Bluetooth

DEVICE ................................................................11

Pairing this unit with your Bluetooth device......11

Connecting an already-paired device via

Bluetooth......................................................11

Disconnecting a Bluetooth connection .............11

 OTHER FUNCTIONS AND

INFORMATION

STEREO PAIR .....................................................12

Setting/Playing back music .............................. 12

Canceling Stereo Pair ......................................13

UPDATING THE FIRMWARE..............................14

OPTION SETTINGS.............................................14

ADDITIONAL INFORMATION.............................15

TRADEMARKS....................................................15

TROUBLESHOOTING.........................................16

General ............................................................ 16

MusicCast ........................................................ 16

Network ............................................................ 16

Bluetooth ..........................................................18

SUPPORTED DEVICES/MEDIA AND FILE

FORMATS............................................................19

SPECIFICATIONS ............................................... 20

CONTENTS

SUPPLIED ACCESSORIES

Power cable Cushion Cable cover

y

You can hide the cables by installing the cable cover.

Install as above.

Cussion

Cable cover

Bottom

y

To prevent the vibration from the sound from

reaching the wall, attach the cushions on the

four corners of the rear panel.

INTRODUCTION

3 En

En

■ Top panel

A (power)/CONNECT (☞ P.5)

B

Turns down the volume.

C

Turns up the volume.

D

Plays/pauses.

E Bluetooth indicator

Lights during Bluetooth connection.

F Power indicator

Lights while the unit is turned on.

G Network indicator

Lights while the unit is connected to the wired or wireless

(Wi-Fi) network.

H Reset button (☞ P.16)

Press to restart the unit.

y

A

, B, C, D are touch sensors. They react when you touch them with your finger.

If the volume reaches the maximum/minimum value, these three indicators (

E, F, G) flash twice at the same time.

■ Rear panel

A Wall mount hanger hole

Use to mount the unit to a wall mount hanger (☞ P.5).

B Key hole slot/key hole slot cover (☞ P.4)

If you lift up the key hole slot covers, you will find the

key hole slots for mounting the unit to a wall.

C Power connector (☞ P.5)

D Network terminal (☞ P.6)

Use a LAN cable (commercially available) to connect to

the network.

y

If you use the unit with Wi-Fi, a LAN cable is not necessary

to connect to the unit.

PART NAME

576

8

23

4

1

Bottom

Note

2

1

2

34

4 En

Plug the power cable into the wall outlet after connecting all the other cables.

Placing the unit too close to a CRT TV may impair the picture color or cause a buzzing noise. In this case, move the unit at least

20 cm (8") away from the TV. This is not an issue with LCD and plasma TVs.

You can mount the unit on the wall as follows.

A Install screws (commercially available) into a solid wall or wall support as shown in the illustration. Use 3.5 to 4 mm (1/8")

diameter self-tapping screws.

B Hang the unit by its keyhole slots onto the protruding screws.

• Make sure the shaft of the screw is seated in the narrow part of the keyhole slot. Otherwise, the unit may fall.

• Do not mount the unit on thin plywood or on a wall with a soft surface material. Otherwise, the screws may pull out of the

surface and the unit may fall, possibly damaging the unit or causing personal injury.

• Do not affix the unit to a wall using nails, adhesives, or unstable hardware. Long-term use and vibration may cause the unit to

fall.

• To avoid accidents resulting from tripping over loose cables (such as a power cable), affix the cables to the wall.

• When using the brackets to mount the unit on a wall / ceiling, please use safety wire (not included) between the unit and the

bracket to prevent the unit from falling.

• If you are not sure of a safe way to install the unit, consult a professional installer or a building contractor.

• To prevent the vibration from the sound from reaching the wall, attach the cushions on the four corners of the rear panel

(☞ P.2).

INSTALLATION

Install in a stable place, being careful of

the following points:

• Do not place on top of steel or other

metal plates.

• Do not cover with a cloth, etc.

For Bluetooth device users

• Install in the same room as the device

with which signals are to be exchanged

(Bluetooth profile A2DP compatible

smartphone, digital audio player, etc.)

within a direct line-of-sight distance of

10 m (33 ft).

• Make sure there are no obstacles

between this unit and the Bluetooth

device.

Note

Within 10 m (33 ft)

For Bluetooth device users

Mounting the unit on a wall

12

Wall/wall

support

Minimum

20 mm (3/4")

6 mm

(1/4")

147 mm

(5-3/4")

WX-030

2.2 kg (4.9 lbs.)

y

The unit can be installed vertically and

horizontally.

Note

PREPARATION

TURNING ON THE POWER

5 En

En

■ To mount the unit to a wall mount hanger

The unit can be mounted to the wall using a commerciallyavailable wall mount hanger. Use the wall mount hanger hole on the

rear panel to mount.

y

Use a wall mount hanger that is compatible for a unified coarse screw, such as those used for the tripod stand of a camera.

• If using a wall mount hanger, use the one compatible for this unit.

• Use the wall mount hanger whose withstand load capacity is over 4.5 kg (10 lbs.).

• Follow the instructions in the owner’s manual of the wall mount hanger and mount the unit correctly.

• If you mount the unit incorrectly or use a wall mount hanger that is not compatible for the unit, the unit may fall and cause

injury.

• Check the safety after mounting the unit. Yamaha is not responsible for any accidents which may be caused due to an

incorrect installation position or incorrect installation methods, or for any malfunction of the wall mount hanger. If you are

worried about the safety, ask a professional to install.

Rear panel

243 mm (9-5/8")

121.5 mm (4-3/4")

26 mm

(1")

WX-030

2.2 kg (4.9 lbs.)

156.5 mm (6-1/8")

Minimum

5 mm (1/4")

Specification of mounting screw:

UNC 1/4-20

Specifications of the screw hole

Diameter 6.35 mm (1/4")

Screw thread 20 (per 1")

Diameter 6.35 mm (1/4")

Depth 9 mm (3/8")

WX-030

Note

TURNING ON THE POWER

A Plug the power cable into the wall outlet

and tap (power)/CONNECT.

The unit turns on and the power indicator lights. If

you tap again, the unit turns off (standby mode)

and the power indicator turns off.

y

Auto Standby

Auto Standby is a mode in which the unit

automatically enters standby mode if about

20 minutes have elapsed with no playback and no

operation. You can enable/disable this mode with

the MusicCast CONTROLLER app (

☞

P.7).

• After the power plug is inserted to the wall outlet, it takes

about 10 seconds for the unit to start up internally. The

unit cannot play back during this time.

• Do not touch the touch sensors ( (power)/

CONNECT// / ) for about 10 seconds after

the unit starts up, since the unit is adjusting sensor

sensitivity. If your finger touches the touch sensors during

this time, they may not function properly after the unit

starts up.

Power cable

Rear pannel

Top pannel

Power indicator

Tap (power)/CONNECT.

Note

6 En

Connect the unit to the network as shown below.

y

• For details on Internet connection, refer to the owner’s manuals of your connecting devices.

• Some security software installed on your PC or the firewall settings of connecting devices (such as a router) may block the

access of the unit to the connecting devices or the Internet. In this case, change the setting of the security software or

connecting devices.

• If you connect the unit to the network with a LAN cable, connect with a commercially available STP (shielded twisted pair)

network cable (straight, CAT-5 or higher).

• Using the MusicCast CONTROLLER app, make sure that the unit and other connecting devices are connected to the same

router.

CONNECTING TO THE NETWORK

LAN

WAN

Internet

Modem

Broadband

router

This unit

Tablet

Mobile device

PC

Network attached

storage (NAS)

Network cable

7 En

En

MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a

variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your

house with one easy-to-use app. For more details and a lineup of MusicCast compatible products, visit our website.

http://www.yamaha.com/musiccast/

■ MusicCast CONTROLLER

• Main functions

- Basic operations such as turning the unit on/off and, volume adjustment.

- Select/play/pause the music.

- Play music in the devices.

- Equalizer setting

- Sleep timer

• System requirements

- For details, search App Store or Google Play

TM

for “MusicCast CONTROLLER.”

• The application supports iPhone/iPad/iPod touch and Android mobile devices.

- WLAN environment.

■ Mobile device (smartphone, etc.)

To use the unit, you need the dedicated app “MusicCast CONTROLLER” for the operation. Search for the free app “MusicCast

CONTROLLER” on App Store (for iOS devices) or Google Play (for Android devices) and install it to your device.

For details, refer to the instructions for this app in each store.

HOME AUDIO NETWORK WITH MusicCast

Connecting to the network using MusicCast CONTROLLER

A Install the MusicCast CONTROLLER app to

the mobile device.

B Start the app.

After the app starts, select “Setup.”

y

If you have already connected a MusicCast

compatible device to the network, tap

(Settings) and then “Add New Device.”

C Turn on the unit.

The power indicator lights.

D Touch and hold the (power)/CONNECT

on the unit for 3 seconds.

The Network and the Bluetooth indicators flash quickly.

E Set the network.

Connect your audio device to the network.

Follow the guidance displayed in the app to set.

F Follow the instructions in the MusicCast

CONTROLLER app to play music.

2

1

Setup

3

34

4

(power)/CONNECT

Power

indicator

Bluetooth

indicator

Network

indicator

If your router supports multiple SSID’s (network names), connect the mobile device to the first access point (“SSID 1”,

etc.)

HOME AUDIO NETWORK WITH MusicCast

8 En

■ Setting of the devices and playback

Create the following network (MusicCast Network) using the MusicCast CONTROLLER app.

y

If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect another

MusicCast support device to the router with a network cable to extend the range (Extend mode).

Depending on where it is placed, the MusicCast compatible device may not be able to play back a high-resolution audio source.

In this case, connect the device directly to the router with a network cable.

WX-030

wireless router

Standard Mode

Extend Mode

WX-030

9 En

En

LISTENING TO THE MUSIC

You can listen to world-wide radio stations via Internet. After connecting the unit to the network, use the MusicCast

CONTROLLER app (☞ P.7) to play the radio.

y

You can use the advanced feature of vTuner (such as adding a new station to the list) by accessing the following website with

the web browser on your PC.

http://yradio.vtuner.com/

- Before registering the Internet radio station, play any Internet radio station with this unit.

- To create a necessary account for registration, you need the vTuner ID of this unit and your e-mail address. You can check the

vTuner ID on “Information” in the MusicCast CONTROLLER app. (☞ P.7)

Select (Settings), then “ Room name*/Information,” and check the vTuner ID.

*You can register any name for the Room name.

This unit allows you to play back music files such as MP3, WMA, or FLAC (lossless audio data compression format) files

stored in the computer (server) connected to the network or NAS.

To play back music files in your computer with this unit, you need to make the media sharing setting between the unit and

computer (Windows Media Player 11 or later). The following instructions use Windows Media Player 12 in Windows 7 as an

example.

■ For Windows Media Player 12

LISTENING TO THE INTERNET RADIO

LISTENING TO THE SONGS IN THE COMPUTER AND NAS

Setting the media sharing of music files

A Start Windows Media Player 12 on your PC.

B Select “Stream”, then “Turn on media

streaming.”

The control panel window of your PC is shown.

C Click “Turn on media streaming.”

D Select “Allowed” from the drop-down list

next to “WX-030.”

y

The names on the list are device names (Room

names). You can set Room names on “ Room

name/Information” in the MusicCast

CONTROLLER app (

☞

P.7). If the Room name

is not set, the Room name is “WX-030 ***.” (***

is an arbitrary number.)

E Click “OK” to exit.

y

For details on media sharing settings, refer to Windows

Media Player help.

2

Turn on media streaming...

3

Turn on media streaming

Only setting the media sharing is explained in this section.

After setting, operate Windows Media Player with your

PC as usual to play back.

4

WX-030



Allowed

PLAYING BACK MUSIC WITH AirPlay

10 En

Playing abundant supported contents with high quality sound from AirPlay.

The AirPlay function allows you to play back iTunes/iPod music on the unit wirelessly via a network.

Follow the procedure below to play back iTunes/iPod music contents on the unit.

Tap/click on the iPod/iTunes screen and select a device other than WX-030 from the speaker list. Or, change the source to

other than AirPlay, using “MusicCast CONTROLLER.”

◆ For Windows Media Player 11

A Start the Windows Media Player 11 on your PC.

B Select “Library” then “Media Sharing.”

C Check the “Share my media to” box, select the “WX-030” icon, and click “Allow.”

y

The names on the list are device names (Room names). You can set Room names on “ Room name/Information” in the

MusicCast CONTROLLER app (

☞

P.7). If the Room name is not set, the Room name is “WX-030 ***.” (*** is an

arbitrary number.)

D Click “OK” to exit.

◆ For a PC or a NAS with other DLNA server software installed

Refer to the owner’s manual of your device or software and configure the media sharing settings.

PLAYING BACK MUSIC WITH AirPlay

Playback of iTunes/iPod music contents

A Turn on the unit, and start iTunes on the PC

or display the playback screen on the iPod.

If the iTunes/iPod recognizes the unit, the AirPlay icon

( ) appears.

B On the iTunes/iPod, click (tap) the AirPlay

icon and select the unit (room name of the

unit) as the audio output device.

The source automatically switches to [AirPlay] and

playback starts (except in the eco standby mode).

C Select a song and start playback.

Clearing AirPlay

1

2

iTunes

(example)

iPod iOS7/iOS8

(example)

iTunes

(example)

iPod

(example)

The unit’s room name is

displayed where “-------” is

indicated above.

11 En

En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device

(smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device.

■ Pairing (Registration)

■ Connecting from the connecting device

A In the Bluetooth settings of the connecting device, turn Bluetooth on.

B From the Bluetooth connection list of the connecting device, choose this unit (the

Room name of this unit ☞ P.9).

The Bluetooth connection will be established, and the Bluetooth indicator will light.

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth

connection will be disconnected.

• Tapping (power)/CONNECT to enter standby mode.

• Touching and holding for 3 seconds.

• Disconnecting the Bluetooth connection from the connecting device.

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Pairing this unit with your Bluetooth device

A

Turn on the unit.

The power indicator lights.

B On your connecting device (mobile device),

set Bluetooth to on.

C Perform Bluetooth pairing on the connecting

device.

For details, refer to the owner’s manual of the connecting

device.

D From the Bluetooth connection list of the

connecting device, choose this unit (the

Room name of this unit ☞ P.9).

y

• Finish the operation from turning on the unit to completing

pairing in 5 minutes.

• If you are asked to enter a password, enter the numerals “0000.”

Connecting an already-paired device via Bluetooth

Disconnecting a Bluetooth connection

1

(power)/CONNECT

Power indicator

-------

4

The unit’s Room name is displayed where

“-------” is indicated above.

Check that the pairing process on the connecting device

has been completed. If the pairing process fails, start over

from step B. For details, see the connecting device’s

owner's manual.

Note

12 En

OTHER FUNCTIONS AND INFORMATION

You can use two WX-030 units to reproduce stereo sound by setting each speaker as the right

or left speaker. Set the left and right speakers separately by following the steps below.

A Connect each WX-030 to the same network by using the dedicated app “MusicCast

CONTROLLER.”

If the WX-030 is linked to another MusicCast unit, first disconnect the link by using the dedicated app “MusicCast

CONTROLLER.”

B Tap (power)/CONNECT of each unit to set them to standby mode.

C Tap and hold the following together for 3 seconds to set the left/right speakers.

1 For setting the left speaker: and

Indicators light from right to left repeatedly (refer to

of the table), and the unit enters pairing standby

mode.

2

For setting the right speaker: and

Indicators light from left to right repeatedly (refer to

of the table), and the units start pairing.

Indicator display during the Stereo Pair

After paring is completed, the indicators light from the center to both sides (refer to of the table), and all indicators

return to the normal status.

STEREO PAIR

• To use the Stereo Pair function, you need two

WX-030.

• Before setting the Stereo Pair, update the

dedicated app “MusicCast CONTROLLER”

and the firmware of both units to the latest

version (☞ P.7).

• Stereo Pair is available only when the

Network Standby mode of the unit is enabled.

Setting/Playing back music

WX-030

Left

speaker

WX-030

Right

speaker

Note

Stereo Pair

status

Indicator display

Start Pairing/

Checking the

Left and Right

Speaker

Pairing

Completed

Left speaker

Right speaker

Right-to-Left Left-to-Right

Center to both sides

STEREO PAIR

13 En

En

D Use the dedicated app “MusicCast CONTROLLER” to play back.

y

• You can check which speaker is the left or right speaker with the dedicated app “MusicCast CONTROLLER” (Indicators

light as

or of the table).

• In Stereo Pair mode, you can operate one speaker to simultaneously turn off both speakers or adjust the volume of both

speakers.

• If about five minutes passes while the unit cannot find the other speaker to connect to, the pairing standby mode will be

cancelled automatically.

• When in Stereo Pair mode, the option settings other than “Initialize the network setting.” (☞ P.14) cannot be set.

The Stereo Pair setting remains even if the speakers enter standby mode or the power cable is unplugged and plugged again.

Tap and hold (or ) and on either speaker together for 3 seconds.

Indicators light from both sides to the center and Stereo Pair will be canceled.

• The Stereo Pair can be canceled only during standby mode.

• If you cancel Stereo Pair with one of the two speakers, the other one will be canceled automatically.

• If one of the two speakers is disconnected from the network when canceling the Stereo Pair, cancel Stereo Pair on each

speaker.

Canceling Stereo Pair

Note

Both sides to center

Indicator display

Note

14 En

OTHER FUNCTIONS AND INFORMATION

You can update the firmware only when the unit is connected to the Internet (☞ P.6).

Follow the instructions in the MusicCast CONTROLLER app to update.

The power indicator flashes quickly while the firmware is being updated.

Updating completed: The unit restarts.

Updating failed: All the indicators flash. Unplug the power cable from the wall outlet and plug it in after 30 seconds or more,

then update the firmware again.

• Do not operate the unit or disconnect the power cable or network cables while updating.

• Do not turn off the unit (enter standby mode) while updating the firmware.

y

• The update of the firmware will be informed in the app.

• When Internet speed is not fast enough or the unit is connected to the wireless network via a wireless network adapter,

network update may not be possible depending on the condition of the wireless connection.

To set the following option settings, set this unit to the standby mode, and touch and hold and for 5 seconds.

*1

*1: If you do not tap any button during these 5 seconds, the unit will cancel the option setting mode.

*2: Network Standby is a standby mode which enables the unit to connect to the network by operating another device.

y

Eco Standby

You can only enable/disable Network Standby mode in the option settings as long as the unit is in Eco Standby mode.

If you disable Network Standby, the unit enters Eco Standby mode, which keeps the standby power consumption to a

minimum. However, you cannot start up the unit with the MusicCast CONTROLLER app during Eco Standby mode.

UPDATING THE FIRMWARE

OPTION SETTINGS

Items Operations

Initialize the network setting.

Touch and hold (power)/CONNECT for 3 seconds (☞ P.3).

Enable/disable Network Standby

mode.

*2

A Touch and hold for 3 seconds. Network Standby will be disabled. To enable it, perform the same

operation.

Enable: The power indicator flashes twice and remains lit.

Disable: The power indicator flashes twice and turns off.

B Tap (power)/CONNECT once to turn on the unit.

The setting is complete.

Enable/disable Wi-Fi.

Touch and hold for 3 seconds. Wi-Fi will be disabled. To enable it, perform the same operation.

Enable: The network indicator flashes twice and remains lit.

Disable: The network indicator flashes twice and turns off.

Enable/Disable Bluetooth.

Touch and hold for 3 seconds. Bluetooth will be disabled. To enable it, perform the same operation.

Enable: The Bluetooth indicator flashes twice and remains lit.

Disable: The Bluetooth indicator flashes twice and turns off.

Note

15 En

En

■ DLNA

What types of servers can I use to browse or

play back music files with DLNA?

Use a DLNA-compatible server, such as one of the following

devices.

PC compatible with Windows Media Player 12 or

Windows Media Player 11

To browse folders (directories) on your PC from this unit, you

need to change the media sharing setting of Windows Media

Player 12 or Windows Media Player 11 to make those folders

accessible from this unit. For details on Windows Media

Player, please ask Microsoft Corporation.

■ iTunes

Can I play back music in the iTunes library on

WX-030?

Use AirPlay (☞ P.10).

■ Internet radio

Can I add other Internet radio stations to the

list?

On the “vTuner Internet Radio” website, you can add Internet

radio stations which do not exist on the list manually.

To use this feature, access the following URL to get a new

account.

http://yradio.vtuner.com/

To create a necessary account for registration, you need the

vTuner ID of this unit and your e-mail address (☞ P.9).

Can I delete Internet radio stations that I do

not listen to from the list?

You cannot delete the vTuner list itself.

You can delete radio stations that you added by accessing the

“vTuner Internet Radio” website.

MusicCast is a trademark or registered trademark of Yamaha

Corporation.

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Yamaha Corporation is under license.

Bluetooth protocol stack (Blue SDK)

DLNA™ and DLNA CERTIFIED™ are trademarks or registered

trademarks of Digital Living Network Alliance. All rights

reserved. Unauthorized use is strictly prohibited.

Windows™

Windows is a registered trademark of Microsoft Corporation in

the United States and other countries.

Internet Explorer, Windows Media Audio and Windows Media

Player are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Android™ Google Play™

Android and Google Play are trademarks of Google Inc.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi

Alliance.

The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi

Alliance.

iTunes, AirPlay, iPhone, iPod, iPod nano, iPod touch, and Safari

are trademarks of Apple Inc., registered in the U.S. and other

countries.

App Store is a service mark of Apple Inc.

ADDITIONAL INFORMATION

TRADEMARKS

Explanations regarding GPL

This product utilizes GPL/LGPL open-source software

in some sections. You have the right to obtain,

duplicate, modify, and redistribute this open-source

code only. For information on GPL/LGPL open source

software, how to obtain it, and the GPL/LGPL license,

refer to the Yamaha Corporation website

(http://download.yamaha.com/sourcecodes/musiccast/).

16 En

Refer to the table below when the unit does not function properly. If your problem is not listed below or if the

instruction below does not help, turn off the unit, disconnect the power cable, and contact the nearest

authorized Yamaha dealer or service center.

TROUBLESHOOTING

General

Problem Cause Solution

The unit is not turned on, or the

touch sensors do not react.

Your finger was touching the touch sensor on the

top while the unit was starting up (the unit is

adjusting the touch sensor sensitivity while the

unit is starting up for about 10 seconds after you

plugged the power cable into the wall outlet).

While the unit is starting up, wait and avoid touching

the sensors until the unit has completely started up.

Tap (power)/CONNECT after the unit has

completely started up (☞ P.3).

The unit is turned off as soon as

the unitis turned on.

The unit does not operate

properly.

The power cable is not properly connected. Connect the power cable firmly.

This unit cannot be operated. The internal microcomputer has frozen, due to an

external electric shock (such as lightning or

excessive static electricity) or to a drop in the

power supply voltage.

Press the reset button on the bottom of the unit

(☞ P.3) using a fine-tipped stick and restart the unit.

(If the problem persists, unplug the power cable from

the wall outlet and plug it again after 30 seconds or

more.)

No sound. No appropriate source has been selected. Select the music source that you want to play using

the MusicCast CONTROLLER app (☞ P.7).

The volume is minimum or mute. Turn up the volume.

There is noise interference from

digital or high-frequency

equipment.

This unit is too close to the digital or high-

frequency equipment.

Place this unit farther away from such equipment.

MusicCast

Problem Cause Solution

Cannot make the connection

settings on the MusicCast

CONTROLLER app.

The mobile device is not connected to the

wireless router at your home.

Connect the mobile device to the wireless router and

start the MusicCast CONTROLLER app.

Disable the cellular data transmission.

The unit is turned off. Turn on the unit.

Network

Problem Cause Solution

This unit is not detected with the

MusicCast CONTROLLER app on

your mobile device.

The unit and mobile devices are not in the same

network.

Check the network connections and your router

settings, and then connect the unit and mobile device

to the same network.

Your mobile device is connected to the secondary

SSID of a router supporting multi SSID.

When your mobile device is connected to the

secondary SSID, access to the device connecting to

the primary SSID or LAN is restricted (only Internet

access is available). Connect your mobile device to

the primary SSID.

Multiple routers are connected between your

connecting devices (double router).

Disconnect Internet temporarily, check the local

network, and connect the connecting device you wish

to use to the same router.

TROUBLESHOOTING

17 En

En

The network feature does not

function.

The network parameters (IP address) have not

been obtained properly.

Enable the DHCP server function on the router.

The unit is starting up. (The unit becomes

operative about 10 seconds after plugging the

power cable into the wall outlet.)

Use the network function after the unit has

completely started up.

Playback stops (songs cannot be

played back continuously).

There are unsupported files in the server. Remove the files (including image files or hidden

files) which the unit does not support, from the folder

being played back.

A PC is not detected with the

MusicCast CONTROLLER app on

your mobile device.

The media sharing setting is not correct. Configure the sharing setting and select the unit as a

device to which music contents are shared (☞ P.9).

Some security software installed on your PC is

blocking the access of the unit to your PC.

Check the settings of security software installed on

your PC.

The unit and PC are not in the same network. Check the network connections and your router

settings, and then connect the unit and the PC to the

same network.

Your PC is connected to the secondary SSID of a

router supporting multi SSID.

When your PC is connected to the secondary SSID,

access to the device connecting to the primary SSID

or LAN is restricted (only Internet access is

available). Connect your PC to the primary SSID.

Multiple routers are connected between your

connecting devices (double router).

Disconnect Internet temporarily, check the local

network, and connect the connecting devices you

wish to use to the same router.

The Internet radio cannot be

played.

The selected Internet radio station is currently

not available.

There may be a network problem at the radio station,

or the service may have been stopped. Try the station

later or select another station.

The selected Internet radio station is currently

broadcasting silence.

Some Internet radio stations broadcast silence at

certain of times of the day. Try the station later or

select another station.

Access to the network is restricted by the firewall

settings of your connecting devices (such as the

router).

Check the firewall settings of your connecting

devices. The Internet radio can be played only when it

passes through the port designated by each radio

station. The port number varies depending on the

radio station.

Update of the firmware via

network failed.

The network connection is unstable. Try updating again after a while.

The unit cannot connect to the

Internet via a wireless router

(access point).

The wireless router (access point) is turned off. Turn on the wireless router.

The unit and the wireless router (access point)

are too far apart.

Place the unit and the wireless router (access point)

closer to each other (☞ P.6).

There is an obstacle between the unit and the

wireless router (access point).

Move the unit and the wireless router (access point) in

a location where there are no obstacles between them

(☞ P.6).

A wireless network is not

detected with MusicCast

CONTROLLER app on your

mobile device.

Microwave ovens or other wireless devices in

your neighborhood might disturb the wireless

communication.

Turn off these devices.

Access to the network is restricted by the firewall

settings of the wireless router (access point).

Check the firewall setting of the wireless router

(access point).

The iPod does not recognize the

unit when using AirPlay.

The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network

separation function on the router. Connect the iPod to

the SSID which can access the unit.

Problem Cause Solution

La pagina si sta caricando...

Yamaha WX-030 Manuale del proprietario

Yamaha WX-030 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti