Kenwood FDM304SS Manuale del proprietario

Categoria
Robot da cucina
Tipo
Manuale del proprietario
TYPE FDM30
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
Instrukcja obsługi
instruções
English 2 - 12
Nederlands 13 - 24
Français 25 - 37
Deutsch 38 - 50
Italiano 51 - 62
Português 63 - 75
Español 76 - 87
Dansk 88 - 98
Svenska 99 - 110
Norsk 111 - 121
Suomi 122 - 132
Türkçe 133 - 143
Česky 144 - 155
Magyar 156 - 167
Polski 168 - 180
Eλληνικά 181 - 193
Slovenčina 194 - 205
Українська 206 - 218
´¸∂w
٢٢٩ ٢١٩
1
3
2
1
7
8
6
5
4
9
11
12
13
14
15
16
2
3
4
5
6
9
7
8
17
18
19
20
21
22
23
a
b
c
d
e
e
d
c
b
a
10A Plastic blender C - standard
attachments
D - optional
attachments
10B Glass blender
c
b
a
a
b
11/12 14-15-16
17
18
13
c
b
a
50mm
30mm
b
a
b
c
d
e
f
b
a
b
a
c
19 21
20
22
22A
d
c
b
a
23+22
23
24
009
Safety
O
Read these instructions carefully and retain for future
reference.
O
Remove all packaging and any labels.
O
If the plug or cord is damaged it must, for safety reasons, be
replaced by Kenwood or an authorised Kenwood repairer in
order to avoid a hazard.
O
DO NOT touch the sharp blades. The blades and discs are
very sharp, handle with care. Always hold by the finger grip
at the top, away from the cutting edge, when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
O
DO NOT process hot ingredients.
O
Be careful if hot liquid is poured into the food processor
or blender as it can be ejected out of the appliance due to
sudden steaming.
O
Never leave the appliance unattended when it is operating.
O
Do not exceed the maximum capacities stated in the
recommended usage chart.
O
Do not operate your appliance for longer than the
times specified below without a rest period. Processing
continuously for longer periods can damage your appliance.
Function/Attachment Maximum
Operation Time
Rest Period
Between
Operations
Blender 60 secs
Unplug the
appliance and
allow to cool
down for 15
minutes
Heavy mixtures in the
bowl (e.g. Dough)
60 secs
Mini Chopper/Mill 30 secs
Grinding Mill 60 secs
O
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
O
Always remove the knife blade before pouring contents from
the bowl.
O
Keep hands and utensils out of the processor bowl and
blender goblet whilst connected to the power supply. If food
needs to be pushed down use a suitable utensil such as a
spatula.
O
Always switch off the appliance and disconnect from
the supply if it is left unattended and before assembling,
disassembling or cleaning.
O
Never use your fingers to push food down the feed tube.
Always use the pusher supplied.
O
Never fit the blade assembly to the power unit without the
goblet or mill jar/lid fitted.
2
English
3
O
CAUTION: Before removing the lid from the bowl, blender or
mill from the power unit:
O
switch off;
O
wait until the attachment/blades have completely stopped;
O
be careful not to unscrew the blender goblet or mill jar from
the blade assembly.
O
Do not use the lid to operate the processor, always use the
on/off speed control.
O
This appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
O
Never use an unauthorised attachment.
O
Never use a damaged appliance. Get it checked or repaired:
see ‘Service and Customer Care’.
O
Never let the power unit, cord or plug get wet.
O
Do not let excess cord hang over the edge of a table or
worktop or touch hot surfaces.
O
Children should be supervised to ensure that they do not play
with the appliance.
O
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
O
Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
O
Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
O
Misuse of your processor, blender or mill can result in injury.
O
The maximum rating is based on the mini chopper/mill
attachment that draws the greatest load. Other attachments
may draw less power.
Blender
O
DO NOT process hot ingredients.
O
SCALD RISK: Hot ingredients must be allowed to cool to
room temperature before placing in the goblet or before
blending.
O
Always take care when handling the blade assembly and avoid
touching the cutting edge of the blades when cleaning.
O
Only operate the blender with the lid in place.
O
Only use the goblet with the blade assembly supplied.
O
Never run the blender empty.
O
Smoothie recipes - never blend frozen ingredients that have
formed a solid mass during freezing, break it up before adding
to the goblet.
4
Mill Attachments
O
Never fit the blade assembly to the power unit without the jar/
lid fitted.
O
Never unscrew the jar/lid while the mill is fitted to your
appliance.
O
Do not touch the sharp blades – Keep the blade assembly
away from children.
O
Never remove the mill until the blades have completely
stopped.
O
The appliance will not work if the mill is incorrectly fitted.
O
Do not process hot ingredients in the mill allow to cool down
to room temperature before processing.
Mini Chopper/Mill
O
The processing of spices is not recommended as they may
damage the plastic parts.
Grinding Mill
O
Do not process dried turmeric root as it is too hard and may
damage the blades.
Juice extractor
O
Do not use the juicer if the filter is damaged.
O
The cutting blades on the base of the filter drum are very
sharp, take care when handling and cleaning the drum.
O
Only use the pusher supplied. Never put your fingers in the
feed tube. Unplug before unblocking the feed tube.
O
Before removing the lid, switch off and wait for the filter to
stop.
Express Dice/Express Serve Attachment and Discs
O
The cutting grid and discs are very sharp; handle with care
when fitting, removing and cleaning. Always hold by the
finger grip away from the cutting edge when handling
the sharp cutting blades, emptying the bowl and during
cleaning.
O
Never use your fingers to push food down the feed tube. Only
use the pusher supplied.
O
Do not use excessive force to push food down the feed tube –
you could damage your attachment.
O
Before removing the lid, switch off wait until the cutting disc
has completely stopped.
O
Do not pour hot liquids down the feed tube.
Express Serve
O
Avoid contact with moving parts. Keep fingers out of the food
outlet opening.
O
Do not operate when using the Dicer or Discs without the
slinger plate fitted. If the slinger plate is not fitted food will
5
clog under the plate and not exit the food outlet, resulting in
damage to your attachment.
O
The citrus juicer is not designed to be used with the Express
Serve. Always use the citrus juicer with the main bowl.
Cleaning
O
Wipe the power unit and whisk drive head with a damp cloth,
then dry. Ensure that the interlock area
is clear of food
debris.
O
Do not immerse the power unit, blade assemblies or whisk
drive head in water.
O
The bowl, lid, pusher and all attachment/tool apart from the
blade assemblies and whisk drive head are suitable for both
handwashing and dishwashing.
O
The blade assemblies should be brushed clean and rinsed
under running water.
Before plugging in
O
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
O
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1 Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2 Wash the parts see ‘Care and Cleaning’.
Key
Processor
1
Pusher
2
Feed tube
3
Lid
4
Bowl
5
Detachable drive shaft
6
Power unit
7
Speed/pulse control
8
Safety interlocks
9
Cord storage (at back)
10A Plastic Blender (if supplied)
a Blade assembly
b Sealing ring
c Goblet
d Filler cap
e Lid
10B Glass Blender (if supplied)
a Blade assembly
b Sealing ring
c Goblet
d Lid
e Filler cap
C Standard Attachments
11
Knife blade
12
Dough tool
13
Dual whisk
14
4mm slicing/grating disc
15
2mm slicing/grating disc
16
Extra fine grating disc
Attachments
Not all of the attachments listed below may be
included with your food processor. Attachments
are dependent upon the model variant. Visit
www.kenwoodworld.com for information on how
to buy an attachment not included in pack.
D Optional Attachments
17
Citrus juicer (if supplied)
18
Glass mini chopper/mill (if supplied)
19
Plastic mini chopper/mill (if supplied)
20
Grinding mill (if supplied)
21
Juice extractor (if supplied)
22
Express Dice (if supplied)
23
Express Serve (if supplied)
6
To Use Your Food Processor
Illustrations
1 Fit the detachable drive shaft onto the power
unit.
2 Then fit the bowl by aligning the
on the
bowl with the
on the power unit, turn
clockwise until it locks
.
3 Fit an attachment over the bowl drive shaft.
O
Always fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid - ensuring the top of the drive
shaft/tool locates into the centre of the lid.
O
Do not use the lid to operate the processor,
always use the on/off speed control.
5 Plug in, switch on and select a speed. (Refer
to the recommended usage chart).
O
The processor will not operate if the bowl
or lid are not fitted correctly into the
interlock. Check that the feed tube and
bowl handle are situated to the right front
hand corner.
O
Use the pulse (P) for short bursts. The pulse
will operate for as long as the control is held
in position.
6 Reverse the above procedure to remove the
lid, attachments and bowl.
O
Always switch off and unplug before
removing the lid.
Important
O
Your processor is not suitable for crushing
or grinding coffee beans, or converting
granulated sugar to caster sugar.
O
When adding almond essence or flavouring
to mixtures avoid contact with the plastic as
this may result in permanent marking.
Using The Attachments
Refer to recommended usage chart
for each attachment.
10A
Plastic Blender
(if supplied)
To Use Your Blender
Illustrations
1 Fit the sealing ring into the blade
assembly - ensuring the seal is located
correctly in the grooved area.
O
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly
and insert the blades into the goblet - turn
anti-clockwise until it is secure. Refer to
the graphics on the underside of the blade
assembly as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid onto the goblet and turn clockwise
until it clicks. Fit the filler cap.
5 Place the blender onto the power unit, align
the
on the blender with the on the
power unit and turn clockwise to lock .
O
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
10B
Glass Blender (if supplied)
To Use Your Blender
Illustrations
1 Fit the sealing ring into the blade unit -
ensuring the seal is located correctly in the
grooved area.
O
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Screw the goblet onto the blade assembly.
Refer to the graphics on the underside of the
blade unit as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and push down to
secure. Fit the filler cap.
5 Place the blender onto the power unit, align
the
on the blender with the on the
power unit and turn clockwise to lock .
O
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
Hints and Tips
O
When making mayonnaise, put all the
ingredients, except the oil, into the blender.
Remove the filler cap. Then, with the
appliance running, add the oil slowly through
the hole in the lid.
O
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
O
The processing of spices is not
recommended as they may damage the
plastic parts.
O
To blend dry ingredients - cut into pieces,
remove the filler cap, then with the appliance
running, drop the pieces down one by one.
Keep your hand over the opening. For best
results empty regularly.
7
11
Knife Blade
Follow the instructions under ‘to use your food
processor’.
Hints and Tips
O
For coarser textures use the pulse control.
O
Cut food such as meat, bread, vegetables
into cubes approximately 2cm.
O
Biscuits should be broken into pieces
and added down the feed tube whilst the
appliance is running.
O
Take care not to over-process.
O
When making pastry use fat straight from
the fridge cut into 2cm cubes.
12
Dough Tool
Use for yeasted dough mixes.
Follow the instructions under ‘to use your food
processor’.
Hints and Tips
O
Do not process for longer than 60 seconds.
O
Place the dry ingredients in the bowl and
add the liquid down the feed tube whilst the
appliance is running. Process until a smooth
elastic ball of dough is formed.
O
Re-knead by hand only. Re-kneading in the
bowl is not recommended as it may cause
the processor to become unstable.
13
Dual Whisk
Using The Whisk
1 Fit the drive shaft and bowl onto the power
unit.
2 Push each beater securely into the drive
head.
3 Fit the whisk by carefully turning until it
drops over the drive shaft.
4 Add the ingredients.
5 Fit the lid - ensuring the end of the shaft
locates into the centre of the lid.
Hints and Tips
Important
O
The whisk is not suitable for making all
in one cake mixes as these mixes are too
heavy and will damage it. Always use the
knife blade.
O
Best results are obtained when the eggs are
at room temperature.
O
Ensure the bowl and whisks are clean and
free from grease before whisking.
14
16
Discs
To Use The Cutting Discs
1 Fit the drive shaft and bowl onto the power
unit.
2 Holding by the centre grip, place the disc
onto the drive shaft with the appropriate side
uppermost.
3 Fit the lid.
4 Put the food in the feed tube.
5 Switch on and push down evenly with the
pusher - never put your fingers in the feed
tube.
Hints and Tips
O
Use fresh ingredients
O
Do not cut food too small. Fill the width of
the feed tube fairly full.This prevents the food
from slipping sideways during processing.
O
When slicing or grating: food placed
upright comes out shorter than food placed
horizontally.
O
There will always be a small amount of waste
on the disc or in the bowl after processing.
17
Citrus Juicer
(if supplied)
a Cone
b Sieve
To use the citrus juicer
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over
the bowl handle.
3 Place the cone over the drive shaft turning
until it drops all the way down.
4 Cut the fruit in half. Then switch on and press
the fruit onto the cone.
O
The citrus juicer will not operate if the sieve
is not locked correctly.
Hints and Tips
O
For best results store and juice the fruit
at room temperature and hand roll on a
worktop before juicing.
O
To help with juice extraction move the fruit
from side to side when juicing.
O
When juicing large quantities, empty the
sieve regularly to prevent the build up of
pulp and seeds.
8
18
/
19
Mini Chopper/Mill (if supplied)
a Jar
b Sealing ring
c Blade assembly
1
Put the ingredients into the jar.
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower
it into the jar, blades down.
4
Screw the blade assembly onto the jar until
finger tight. Refer to the graphics on the
underside of the blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit, align the
on the mill with the on the power unit
and turn clockwise to lock .
6
Select Maximum speed or use the pulse (P).
Hints and Tips
O
Baby food/purée - allow cooked food to
cool down to room temperature before
processing in the mill.
O
For best results the main bowl is
recommended when chopping herbs.
20
Grinding Mill
(if supplied)
a Mill lid
b Grinding mill blade assembly
1 Place your ingredients into the blade
assembly.
2 Fit the lid and turn clockwise to lock.
3 Place the mill onto the power unit and turn
clockwise to lock.
4 Select maximum speed or use the pulse (P).
Hints and Tips
O
For optimum performance when processing
spices do not process more than 50g at a
time.
O
Whole spices retain their flavour for a much
longer time than ground spices so it is best
to grind a small quantity fresh at a time to
retain the flavour.
O
To release the maximum flavour and
essential oils whole spices are best roasted
prior to milling.
O
Do not process dried turmeric root in the mill
as it is too hard and may damage the blades.
O
Cut ginger and coconut into small pieces
before processing.
O
For best results the main bowl is
recommended when chopping herbs.
21
Juice Extractor
(if supplied)
a Pusher
b Juicer lid
c Pulp remover
d Filter drum
e Bowl
f Juicing spout
To use the juice extractor
1 Fit the juicer bowl to the power unit, turn
clockwise until it locks - the spout should
be situated to the left side when the bowl is
fitted correctly.
2 Place the pulp remover into the filter drum -
ensuring the tabs locate with the slots in the
bottom of the drum.
3 Fit the filter drum
4 Fit the attachment lid - turn clockwise until
it locks. Your juicer will not operate if the
bowl or lid are not fitted correctly into the
interlock .
5 Place a suitable glass or jug under the juice
outlet.
6 Cut the food to fit the feed tube.
7 Switch on and push down evenly with the
pusher - never put your fingers in the feed
tube. Process fully before adding more.
O
After adding the last piece, let the juicer run
for a further 30 seconds to extract all the
juice from the filter drum.
important
O
If the juicer starts to vibrate, switch off and
empty the pulp from the drum. The juicer
vibrates if the pulp becomes unevenly
distributed.
O
Some very hard foods may make your juicer
slow down or stop. If this happens switch off
and unblock the filter.
O
Switch off and clear the pulp collector
regularly during use.
Hints and Tips
O
Before processing remove stones and pips
(eg pepper, melon, plum) and tough skins
(e.g. melon, pineapple). You do not need to
peel or core apples and pears.
O
Use firm, fresh fruit and vegetables.
9
22
Express Dice
(if supplied)
a Dicing disc
b Dicing grid
c Dicing pusher
Important: the dicing disc is designed only to be
used with the dicing attachment.
To use the Express Dice
1 Fit the drive shaft and bowl onto the power
unit.
2 Add the dicing disc and fit the lid.
3 Fit the dicing grid into the feed tube.
4 Switch on and use the dicing pusher to
process food items through the dicing grid.
Hints and Tips
O
To assist with processing place both hands on
top of the pusher and press down firmly.
O
For best results, use raw fresh fruit and
vegetables.
O
To prevent the food from jamming do not
pack the food tightly in the feed tube –
ideally the food should be cut no larger than:
50 × 30mm
O
If the food is too hard to push through the
grid cook for approximately 10-15 minutes,
then allow to cool in a refrigerator before
processing.
O
Always remove hard skins, stones, pips and
seeds etc., from food before processing.
Note:
O
Due to the various sizes and shapes of
foods, the diced results will contain some
misshapen pieces, this is normal.
O
Foods such as cheese, ham, and chorizo will
clog in the grid so are not recommended for
use with this attachment.
Cleaning the grid
Use the end of the pusher to dislodge any food
which may become trapped in the dicing grid.
22A
The Express Dice can also be used to
produce French fries, crudités and batons.
1 Fit the dicing grid without the dicing disc.
2 Then manually push the food through the
grid without switching the appliance on.
23
Express Serve
(if supplied)
a Express serve drive shaft
b Extension chute
c Base
d Slinger plate
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the small drive shaft to the main shaft – the
Express serve will not operate unless fitted.
3 Fit the required attachment/disc - do not
apply excessive force. Refer to the Discs and
Express Dice sections for further information,
hints and tips.
Use in conjunction with the following:
14-15-16
22
Important - Dicer and Discs
O
If the food is not exiting the food outlet, switch
off and check that food is not clogging under
the disc and the slinger plate is fitted. Clear
any trapped food before continuing to process.
Care and Cleaning
O
Always switch off and unplug before cleaning.
O
Handle the blade and cutting discs with care
- they are extremely sharp.
O
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
O
Wipe with a damp cloth, then dry. Ensure
that
the interlock area
is clear of food debris.
O
Do not immerse the power unit in water.
O
Store excess cord in the storage area at the
back of the power unit
.
Cleaning Instructions - Refer
to the relevant illustration
24
.
10
Service and Customer Care
O
If you experience any problems with the operation of your appliance, before requesting assistance refer to
the ‘Troubleshooting Guide’ section in the manual or visit www.kenwoodworld.com.
O
Please note that your product is covered by a warranty, which complies with all legal provisions
concerning any existing warranty and consumer rights in the country where the product was purchased.
O
If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised
KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service
centre visit www.kenwoodworld.com or the website specific to your Country.
O
Designed and engineered by Kenwood in the UK.
O
Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a
special local authority differentiated waste collection centre or to a dealer providing this service.
Recommended Usage Chart
Do not operate your appliance for longer than the times specified below without a rest period.
Do not exceed the maximum capacities stated in the chart below.
Processing continuously for longer periods can damage your appliance.
Processing information supplied is for guidance only and will vary depending on the exact recipe and
ingredients being processed.
Do not process hot ingredients
Tool/
Attachment
Function
(Secs)
All in one cake mixes 2 10 1.2kg total
weight
Pastry - rubbing fat into flour
Adding water to combine pastry
ingredients
2
1 – 2
10
10 – 20
300g flour
weight
Chopping fish and lean meat
Pâtés and terrines
2 10 – 30 400g max
lean beef
Chopping vegetables P 5 – 10 100 - 500g
Chopping nuts 2 30 – 60
100g – 200g
Herbs 2 20 – 30 30-50g
Mayonnaise 2 60 – 80 4 egg yolks
Pureeing soft fruit, cooked fruit and
vegetables
2 10 – 30 500g
Egg whites 2 60 – 120 2 – 6 (200g)
Whipping cream (Processing times may
vary, depending on fat content of cream)
2 60 – 120 250-500ml
Yeasted mixes 2 60 340g flour
weight
550g total
weight
11
Recommended Usage Chart
Do not operate your appliance for longer than the times specified below without a rest period.
Do not exceed the maximum capacities stated in the chart below.
Processing continuously for longer periods can damage your appliance.
Processing information supplied is for guidance only and will vary depending on the exact recipe and
ingredients being processed.
Do not process hot ingredients
Tool/
Attachment
Function
(Secs)
Grating and slicing firm food items -
cheese, carrots, potatoes and foods of a
similar texture
2–
Do not fill
above the
maximum 1.2L
marked on
the bowl
Slicing softer food items - cucumbers and
tomatoes
1–
Grates Parmesan cheese 2
Use to squeeze the juice from citrus fruits
e.g.oranges, lemons, limes and grapefruits.
1–
Cold liquids and drinks
(Add ice/frozen ingredients to goblet
last)
2 30 – 60
1.2 litre
Milkshake/Cold milk based mixtures 2 15 – 30 1 litre
Ice crushing P 30 – 40 6 ice cubes
(125g)
Batter mix
(Add liquid ingredients first)
1
2
10
50
1 litre
Nuts 2 10 – 30 50g
Coee beans 2 30 50g
Uncooked meat (beef steak) cut into 2cm
cubes
P570g
Processing spices
Black peppercorns, cardamom seeds,
cumin seeds, coriander seeds and fennel
seeds
2
30 – 60
50g
Grinding coee beans 2 50g
Chopping nuts P 50g
Processing garlic cloves, fresh chillies and
root ginger
P 30g
Fresh coconut 2/P 30 – 60 40g
Fruit and vegetables 2 600g
12
Troubleshooting Guide
Problem Cause Solution
The processor will not
operate.
No Power.
Bowl not fitted to power unit
correctly.
Bowl lid not locked on
correctly.
Check processor is plugged in.
Check bowl is located correctly and the
handle is situated towards the right front
hand corner.
Check that the lid interlock is located
correctly into the handle area.
The processor will not work if the bowl
and lid are fitted incorrectly.
If none of the above check the fuse/circuit
breaker in your home.
Blender or mill will not
operate.
Blender or mill not locked on
correctly.
Blender or mill not assembled
correctly.
The blender or mill will not operate if fitted
incorrectly to the interlock.
Check blade assembly is fully
tightened into the goblet/jar.
Processor stops during
processing
Processor overloaded/
maximum capacities
exceeded.
Lid unlocked.
Check maximum capacities stated in the
recommended usage chart.
Check lid is locked correctly.
Blender or multi mill
leaking from blade
assembly base.
Seal missing
Seal incorrectly fitted
Seal damaged.
Check seal is fitted correctly and not
damaged. To obtain a replacement seal see
‘Service and customer care’.
Poor performance of
tools/attachments
Refer to hints in relevant ‘Using the attachment’ section. Check attachments
are assembled correctly.
Tool/
Attachment
Function
(Secs)
Use to cut a variety of foods such as
carrot, courgette, cucumber, beetroot and
apples into cubes.
2–
Do not fill
above the
maximum
capacity
marked on
the bowl
Use to cut a variety of foods into French
Fries and crudités such as potato, carrot,
courgette and cucumber.
Manual
13
Veiligheid
O
Lees deze instructies zorgvuldig door en bewaar ze voor
toekomstig gebruik.
O
Verwijder de verpakking en alle labels.
O
Als de stekker of het snoer beschadigd is, moet het om
veiligheidsredenen door Kenwood of een door Kenwood
geautoriseerd reparatiebedrijf vervangen worden, om gevaar
te voorkomen.
O
Raak de scherpe mesjes NIET aan. De messen en de
schijven zijn erg scherp; ga er dus voorzichtig mee om. Bij
het hanteren van de scherpe snijbladen, het legen van de
kom en tijdens schoonmaken altijd vasthouden aan de
vingergreep aan de bovenkant, weg van de snijkant.
O
Verwerk GEEN hete ingrediënten.
O
Wees voorzichtig als er hete vloeistof in de keukenmachine
of blender wordt gegoten omdat deze door het apparaat
kan worden uitgeworpen door plotseling stomen.
O
Laat het apparaat nooit onbeheerd terwijl het aan staat.
O
Nooit de opgegeven maximumcapaciteit overschrijden: zie
tabel voor aanbevolen gebruik.
O
Gebruik uw apparaat niet langer dan hieronder staat
aangegeven zonder een pauze. Als u het apparaat langere
tijd zonder pauze gebruikt, kan dat schade veroorzaken.
Functie / hulpstuk Maximale
inschakeltijd
Pauze tussen twee
inschakelingen
Blender 60 sec.
Haal de stekker uit
het stopcontact en
laat het apparaat
15 minuten afkoelen
Zware mengsels in
de kom (bijv. deeg)
60 sec.
Mini hakhulpstuk /
de molen gebruiken
30 sec.
Maalmolen 60 sec.
O
Til de keukenmachine niet bij het handvat op en draag hem
evenmin op die manier; hierdoor kan het handvat afbreken,
waardoor u letsel kunt oplopen.
O
Voordat u de inhoud uit de kom giet, dient u altijd eerst het
mes te verwijderen.
O
Houd uw handen en keukengereedschap uit de kom van de
keukenmachine en de beker van de blender, wanneer het
apparaat op het lichtnet is aangesloten. Als voedsel naar
beneden moet worden geduwd, gebruik dan een geschikt
gereedschap zoals een spatel.
O
Schakel het apparaat altijd uit en koppel het los van het
stopcontact als deze onbeheerd wordt achtergelaten en vóór
montage, demontage of reiniging.
Nederlands
Vouw voor het lezen a.u.b. de voorpagina met illustraties uit
14
O
Gebruik nooit uw vingers om voedsel in de vultrechter te
duwen. Gebruik altijd de meegeleverde stamper.
O
Monteer het mesconstructie nooit aan de voedingseenheid
zonder de beker, kan of deksel te plaatsen.
O
WAARSCHUWING: Voordat u het deksel van de kom, blender
of molen van het motorblok af haalt:
O
zet het apparaat uit;
O
wacht totdat de hulpstukken / messen helemaal tot stilstand
zijn gekomen;
O
wees voorzichtig dat u de beker van de blender of molen
niet van het meselement af draait.
O
Gebruik nooit het deksel om de keukenmachine te bedienen,
maar altijd de aan/uit-knop.
O
Als teveel kracht wordt uitgeoefend op het
vergrendelingsmechanisme, wordt dit apparaat beschadigd
en kan het letsel veroorzaken.
O
Gebruik nooit een niet bij het apparaat behorend hulpstuk.
O
Gebruik nooit een beschadigd apparaat. Laat het nakijken of
repareren: zie 'Onderhoud en klantenservice'.
O
Laat het motorblok, het netsnoer of de stekker nooit nat
worden.
O
Laat het snoer nooit over de rand van een tafel of werkblad
hangen of in aanraking komen met hete oppervlakken.
O
Op kinderen moet toezicht gehouden worden om er zeker van
te zijn dat ze niet met het apparaat spelen.
O
Dit apparaat mag niet door kinderen worden gebruikt. Houd
het apparaat en het snoer buiten het bereik van kinderen.
O
Dit apparaat kan worden gebruikt door personen met
verminderde lichamelijke, sensorische of geestelijke
capaciteiten of gebrek aan ervaring en kennis mits ze onder
toezicht staan of instructie hebben gekregen over het veilige
gebruik van het apparaat, en de betrokken risico’s begrijpen.
O
Gebruik het apparaat alleen voor het huishoudelijke gebruik
waarvoor het is bedoeld. Kenwood kan niet aansprakelijk
worden gesteld als het apparaat niet correct werd gebruikt, of
deze instructies niet werden opgevolgd.
O
Misbruik van de processor, blender of molen kan letsel
veroorzaken.
O
De maximale beoordeling is gebaseerd op de mini-hakmolen /
molen hulpstuk dat de grootste belasting trekt. Andere
hulpstukken kunnen minder stroom verbruiken.
Blender
O
Verwerk NOOIT hete ingrediënten.
O
KANS OP BRANDWONDEN: Laat hete ingrediënten altijd tot
kamertemperatuur afkoelen voordat u ze in de beker plaatst
of verwerkt.
O
Wees voorzichtig wanneer u de messen hanteert en raak het
snijvlak van de messen bij het reinigen niet aan.
O
Schakel de blender pas in nadat het deksel is bevestigd.
1 / 1

Kenwood FDM304SS Manuale del proprietario

Categoria
Robot da cucina
Tipo
Manuale del proprietario