D-Link COVR Series Manuale utente

AC1200 DUAL BAND WHOLE HOME WI-FI SYSTEM

COVR-C1203/C1200

USER MANUAL

Covr your whole home in Seamless Wi-Fi

C100 M0 Y19 K23

Pantone 3145C

C100 M0 Y19 K23

Pantone 3145C

High Performance

More Coverage

One Seamless Network

iD-Link COVR-C1203 User Manual

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any

person or organization of such revisions or changes.

Manual Revisions

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.

All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store

SM

is a service mark of Apple Inc.

Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.

Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.

Power Usage

ErP Power Usage

This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no

packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy.

Network Standby: 3.5 watts

Preface

Revision Date Description

1.00 March 20, 2018 Initial release.

iiD-Link COVR-C1203 User Manual

Table of Contents

Product Overview ..............................................................1

Package Contents ......................................................................... 1

System Requirements ................................................................. 2

Introduction ................................................................................... 3

Features ............................................................................................3

Hardware Overview ..................................................................... 5

COVR-C1200 LED Indicator ...............................................5

COVR-C1200 Rear Panel ..................................................... 6

Hardware Setup ............................................................................ 7

Using The D-Link Wi-Fi App ..............................................7

Manual Installation ...........................................................10

Conguration ...................................................................12

Home ..............................................................................................13

Internet ................................................................................... 14

COVR-C1200 .........................................................................15

Connected Clients ..............................................................16

Extenders ...............................................................................17

Settings ..........................................................................................18

Wizard .....................................................................................18

Internet ................................................................................... 19

IPv4 .....................................................................................19

IPv6 .....................................................................................29

VLAN ...................................................................................42

Wireless ..................................................................................44

Wi-Fi ....................................................................................44

Guest Zone .......................................................................46

Network .................................................................................. 47

Advanced ......................................................................................49

QoS Engine............................................................................49

Firewall ...................................................................................51

IPv4/IPv6 Rules ...............................................................53

Port Forwarding ..................................................................54

Port Forwarding .............................................................54

Virtual Server ...................................................................55

Website Filter ................................................................... 56

Static Routes .........................................................................57

IPv4 .....................................................................................57

IPv6 .....................................................................................58

Dynamic DNS .......................................................................59

Management ................................................................................ 61

Time & Schedule .................................................................61

Time ....................................................................................61

Schedule ...........................................................................62

System Log ............................................................................ 63

System Admin ......................................................................65

Admin.................................................................................65

System ...............................................................................67

Upgrade .................................................................................68

Statistics .................................................................................69

Adding Additional Covr Points .......................................70

Using the D-Link Wi-Fi App .....................................................70

iiiD-Link COVR-C1203 User Manual

Table of Contents

Connect to a Wireless Client ...........................................73

WPS Button ...................................................................................73

Upgrading Firmware .......................................................74

Using the Web User Interface .................................................74

Using the D-Link Wi-Fi App .....................................................74

Resetting Your Device .....................................................76

Wireless Basics .................................................................77

What is Wireless? ......................................................................... 78

Tips ...................................................................................................80

Technical Specications ..................................................81

Regulatory Information ..................................................83

1D-Link COVR-C1203 User Manual

Section 1 - Product Overview

Product Overview

Package Contents

If any of the above items are missing or damaged, please contact your local reseller.

Wi-Fi Conguration Card

Ethernet CableCOVR-C1200 Covr Point A Router (x 1)

COVR-C1200 Covr Point (x 2)

Quick Installation Guide

Power adapter (x 3)

Wi-Fi Conguration Card

2D-Link COVR-C1203 User Manual

Section 1 - Product Overview

Network Requirements

• An Ethernet-based cable or DSL modem

• IEEE 802.11ac/n/g/b/a wireless clients

• 10/100/1000 Mbps Ethernet

Web-based Conguration

Utility Requirements

Computer with the following:

• Windows, Macintosh, or Linux-based operating system

• An installed Ethernet adapter or Wi-Fi interface

Browser requirements:

• Internet Explorer 10 or higher

• Firefox 28 or higher

• Safari 6 or higher

• Chrome 28 or higher

D-Link Wi-Fi App

Requirements

• iOS or Android smartphone or tablet. (Please refer to the mobile

app's store page to check whether your device is compatible.)

System Requirements

3D-Link COVR-C1203 User Manual

Section 1 - Product Overview

Introduction

The COVR-C1203 AC1200 Dual Band Whole Home Wi-Fi System is an elegant, high-performance home networking solution

comprised of three COVR-C1200 Covr Points. Each Covr Point features powerful AC1200 Wi-Fi combined with two on-board Gigabit

Ethernet ports to bring the uncompromised, full potential of AC1200 Wi-Fi to any area in your home, oering true seamless whole

home coverage. With COVR-C1203, D-Link has got you Covr’d.

Features

• Powerful Wi-Fi - Most whole home Wi-Fi systems use multiple low-performance devices to disperse Wi-Fi

throughout areas of the home. COVR-C1203 uses AC1200 Wi-Fi to create a blazing-fast, seamless whole home

network throughout your home, even in the most hard-to-reach places.

• Smart Roaming - The AC1200 Dual Band Whole Home Wi-Fi System creates a single, seamless wireless network

throughout your entire home using a single wireless network name (SSID). This means that once you connect,

your connection is maintained seamlessly as you and your wireless device roam throughout your home, allowing

you to experience an uninterrupted connection without buering, drop-outs, or dead spots.

• MU-MIMO Technology - Multi-User Multiple Input Multiple Output (MU-MIMO) sends and receives data to and

from multiple devices simultaneously to increase speed and eciency. Your laptop, tablet, media player, and game

console can all be sending and receiving data at the same time, with no need to wait in line, allowing you to get

more out of your home Wi-Fi network than ever before.

1

Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and

environmental factors, including volume of network trac, building materials and construction, and network overhead, may lower actual data throughput rate. Environmental

conditions will adversely aect wireless signal range.

4D-Link COVR-C1203 User Manual

Section 1 - Product Overview

• Smart Steering - Behind the scenes, each Covr Point automatically determines whether to connect a device to

the 2.4 or 5 GHz band, providing the best speed and range for each device and optimally distributing devices to

each network.

• Expandable Network - Covr is a scalable solution; extra Covr Points can be added to increase the reach of your

network. Scale up your Wi-Fi by adding another Covr Point to get true whole-home coverage.

• Easy Setup - Using the free D-Link Wi-Fi app or the intuitive web-based user interface, you can quickly set up the

COVR-C1203 and congure your network with your specic settings in a matter of minutes.

Features (continued)

5D-Link COVR-C1203 User Manual

Section 1 - Product Overview

Hardware Overview

COVR-C1200 LED Indicator

1

COVR Status

LED

Solid red The COVR-C1200 is booting up.

Blinking orange

The COVR-C1200 is syncing to another COVR-C1200 Covr Point.

Once set up, a blinking orange LED indicates there is no connection to the device.

Blinking white

Once set up, a blinking white LED indicates a weak connection, or that the Covr Point is connecting

to a wireless client using Wi-Fi Protected Setup (WPS).

Solid white

The COVR-C1200 is powered on and running.

Once set up, a solid white LED indicates a strong connection.

O

The COVR-C1200 is powered o.

If the device is powered on and Status LED is disabled, the device is working as normal. Refer to

the Admin section on page 65 for more information.

1

6D-Link COVR-C1203 User Manual

Section 1 - Product Overview

COVR-C1200 Rear Panel

1 Gigabit LAN ports

Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.

On Covr Point A, LAN port 1 is designated as the WAN port that connects to your modem.

2 Power Connector Connect the included power adapter here to power on the device.

3 WPS

Press this button to establish an instant connection to a wireless client using Wi-Fi Protected Setup

(WPS).

4

Cover Plate Removal

Button

Press this button to release the top cover plate on the device to replace it with a dierent color plate.

1 1

2

3

4

7D-Link COVR-C1203 User Manual

Section 2 - Installation

Hardware Setup

Using The D-Link Wi-Fi App

The free D-Link Wi-Fi app allows you to install and congure your COVR-C1203

AC1200 Dual Band Whole Home Wi-Fi System from your mobile device or

tablet.

This following section will walk you through the installation and conguration

steps for the COVR-C1203 AC1200 Dual Band Whole Home Wi-Fi System using

the D-Link Wi-Fi app.

To get the D-Link Wi-Fi app, browse the App Store or Google Play and search

for D-Link Wi-Fi. You can also scan the QR code on the right, which will take

you to the respective D-Link Wi-Fi app store page directly.

Note: The screenshots may dier depending on your mobile device’s OS

version. The following steps show the Android interface of the D-Link Wi-Fi

app. If you are using an iOS device, the appearance may dier from that of the

screenshots, but the process is the same.

D-Link Wi-Fi

8D-Link COVR-C1203 User Manual

Section 2 - Installation

Using The D-Link Wi-Fi App (Continued)

1. Open the D-Link Wi-Fi app and tap Install Your Device at the bottom.

2. Next, select COVR-C1203 from the list and tap NEXT.

9D-Link COVR-C1203 User Manual

Section 2 - Installation

3. When asked to create a new network, or add to an existing network,

choose Create a new Covr network and tap NEXT.

4. You will now be guided through a step-by-step process for setting up

the COVR-C1203 hardware. Simply follow the on-screen instructions to

complete the installation and Covr Wi-Fi conguration process.

Using The D-Link Wi-Fi App (Continued)

10D-Link COVR-C1203 User Manual

Section 2 - Installation

2. Wait for Covr Point A to boot up. When the COVR LED starts blinking orange, wirelessly connect your PC or laptop to the

Wi-Fi name (SSID) printed on the back of the device, or on the included Wi-Fi Conguration Card.

1. Position the Covr Point labeled A close to your Internet-connected modem. Next, connect the power adapter and plug

the Covr Point into a power outlet.

G

Manual Installation

If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-C1203 and congure your Covr Wi-Fi network using

the web-based user interface. Follow the instructions below to set up your COVR-C1203 AC1200 Dual Band Whole Home Wi-Fi System.

A

SSID

Wi-Fi

Password

11D-Link COVR-C1203 User Manual

Section 2 - Installation

Your COVR-C1203 AC1200 Dual Band Whole Home Wi-Fi System is now set up and ready to use. You can now congure your

Covr Wi-Fi settings using the free D-Link Wi-Fi mobile app or the web-based user interface. Refer to the Conguration section

on page 12 for more information on conguring your network using the web-based user interface.

3. Type http://covr.local./ into a web browser and follow the on-screen instructions to complete the setup.

Manual Installation (Continued)

http://covr.local./

12D-Link COVR-C1203 User Manual

Section 3 - Conguration

Conguration

When prompted, enter your password. If you previously followed the setup

wizard, please use the admin password you entered during the wizard.

Otherwise, leave the password blank. Click Log In to proceed.

Note: If you cannot remember your password and cannot log in, press the

Reset button on the bottom of the device with an unfolded paper clip to

restore the device to its default settings. Refer to Resetting your Device on

page 76 for more information.

To access the web conguration utility, open a web browser such as Internet

Explorer and enter http://covr.local./ in the address bar.

If you want to access the web interface using a wireless connection, connect

to your Covr Wi-Fi, then open a web browser such as Internet Explorer and

enter http://covr.local./ in the address bar.

Note: If you have previously changed the Management Link in the Network

settings, use this link to access the web user interface instead.

When you are logged in, the device's home page will open, displaying its

current connection status.

The bar at the top of the page has quick access to Settings , Features, and

Management functions. You may quickly jump back Home at any time.

Note: The system will automatically log out after a period of inactivity.

13D-Link COVR-C1203 User Manual

Section 3 - Conguration

Home

The Home page displays the current status of your Covr Wi-Fi network in the

form of an interactive diagram. You can click each icon to display information

about each part of the network at the bottom of the screen. The menu bar at

the top of the page will allow you to quickly navigate to other pages. Refer to

the following pages for a description of each section.

14D-Link COVR-C1203 User Manual

Section 3 - Conguration

Click on the Internet icon to bring up more details about your Internet

connection. Click IPv4 or IPv6 to see details of the IPv4 and IPv6 connection

respectively.

The Home page displays whether or not Covr Point A is currently connected

to the Internet. If it is disconnected, click Click to repair to bring up the setup

wizard, refer to Wizard on page 18 for more information.

Click Release IP Address to release the current IP address and disconnect

from the Internet. If you wish to reconnect the Internet, click Renew IP

Address.

To recongure the Internet settings, click Go to settings at the bottom-right.

Internet

15D-Link COVR-C1203 User Manual

Section 3 - Conguration

COVR-C1200

Click on the COVR-C1200 icon to view details about the Covr Point's wireless

and local network settings. This includes IPv4 and IPv6 local network, and Wi-Fi

information.

This overview is only informational. To congure these sections, refer to the

corresponding conguration sections in this manual.

16D-Link COVR-C1203 User Manual

Section 3 - Conguration

Connected Clients

Click on the Connected Clients icon to view details about the clients currently

connected to your Covr Wi-Fi network.

To edit each client’s settings, click the pencil icon on the client you want to

edit.

Name: Displays the name of this client. You can edit the client's name here.

Vendor: Displays the vendor of the device.

MAC Address: Displays the MAC address of the device.

IP Address: Displays the current IP address of this client.

Reserve IP: Enable to reserve an IP address for this client.

IP Address

(Reserved):

Specify an IP address for the DHCP server to assign to this client.

Parental Control: Enable or disable parental control to allow or block access to the

network for this user.

Schedule: If Parental Control is enabled, use the drop-down menu to select

the time schedule that the rule will be enabled for. The schedule

may be set to Always O, or you can create your own schedules in

the Schedule section. Refer to Schedule on page 62 for more

information.

Click Save when you are done.

La pagina sta caricando ...

D-Link COVR Series Manuale utente

Questo manuale è adatto anche per

D-Link COVR Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti