NEC MultiSync® V521 Manuale del proprietario

Tipo
Manuale del proprietario

Questo manuale è adatto anche per

MultiSync V521
MultiSync V721
MultiSync V921
User’s Manual
UÏivatelská pfiíruãka
Bedienerhandbuch
δηγίες ρήσης
Manual del usuario
Manuel Utilisateur
Manuale utente
Gebruikershandleiding
Podr´cznik u˝ytkowinka
Руководство пользователя
Kullan∂c∂ Klavuzu
00Cover_all.p65 01.11.2000, 11:48 Uhr1
FCC Information
1. Use the attached specified cables with the N0501/N0701/N9902
color monitor so as not to interfere with radio and television
reception.
(1) Please use the supplied power cable or equivalent to ensure
FCC compliance.
(2) Shielded captive type signal cable.
Use of other cables may cause interference with radio and
television reception.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet, prepared by the Federal Communications Commission,
helpful: How to Identify and Resolve Radio-TV Interference Problems.
This booklet is available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.
00Cover_all.p65 03.11.2000, 14:39 Uhr2
English
âesky
Deutsch
Ελληνικά
Español
Français
Italiano
Nederlands
Polski
Русский
Türkçe
01b_XChapterOpener 01.11.2000, 11:48 Uhr1
01b_XChapterOpener 01.11.2000, 11:48 Uhr2
English-1
English
Declaration of the Manufacturer
We hereby certify that the colour monitors
MultiSync V521(N0501)
MultiSync V721(N0701)
MultiSync V921(N9902)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC-Mitsubishi Electric Visual Systems Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
01b_english 01.11.2000, 11:48 Uhr1
English-2
Safety Instruction
Caution:
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Europe except UK, use the power cord provided with the
monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
ENERGY STAR
®
Product
As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display of
America Inc. has determined that this product meets the ENERGY STAR
guidelines for energy efficiency. The ENERGY STA R emblem does not
represent EPA endorsement of any product or service.
IBM is registered trademark of International Business Machines Corporation
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STA R is a U.S. registered mark.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
01b_english 01.11.2000, 11:48 Uhr2
English-3
English
Contents
V Series monitor box* should contain the following:
MultiSync V Series Monitor with tilt / swivel base MultiSync V521,
MultiSync V721 or MultiSync V921
Power cord
Captive Signal Cable
Users manual
CD-ROM includes complete Users Manual in PDF format and
Windows related files (Inf file and color profile). To see the complete
Users Manual, Acrobat Reader 4.0 must be installed on your PC.
* Remember to save your original box and packing material to transport
or ship the monitor.
01b_english 01.11.2000, 11:48 Uhr3
English-4
Tilt / swivel base fixing,
removing
Fixing
This product consists of the MultiSync monitor and the tilt / swivel base.
When fixing the tilt / swivel base to the MultiSync monitor, please follow
the steps below.
Push the six hooks of the tilt / swivel base into the six holes at the
bottom of the MultiSync monitor.
Then slide the tilt /swivel base forward.
Then the latch above the tilt / swivel base engages it is secure.
Removing
Please removing the tilt / swivel base when transporting for repair.
Push down the latch of the MultiSync monitor and pull out the tilt /
swivel base.
Slide backward the tilt / swivel base from the front of the MultiSync
monitor.
Pull out the tilt / swivel base from the holes of the MultiSync monitor.
01b_english 01.11.2000, 11:48 Uhr4
English-5
English
Quick Start
To attach the MultiSync V Series monitor to your
system, follow these instruction:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (Figure A.1)
Tighten all screws.
For the Mac: Connect the Macintosh Cable Adapter (not included) to
the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the captive signal cable to the Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.
4. Connect one end of the power cord to the MultiSync V Series monitor
and the other end to the power outlet (Figure C.1).
5. Turn on the monitor (Figure D.1) and the computer.
6. This completes the installation.
NOTE: If you have any problems, please refer to the
Troubleshooting section of this Users Manual.
Captive Signal Cable
15-pin-mini-D-SUB
Figure A.1
01b_english 01.11.2000, 11:48 Uhr5
English-6
Figure B.1
Figure C.1
Figure D.1
Computer
Mac Adapter
(not included)
15-pin mini D-SUB
Captive Signal Cable
Power Outlet
Power cord
01b_english 01.11.2000, 11:48 Uhr6
English-7
English
Controls
OSM (On-screen Manager) control buttons on the
front of the monitor function as follows:
SELECT Enters and exits the OSM menu.
CONTROL-/+ Selects one of the controls and decreases or increases
the adjustment.
RESET Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately
1 sec.
BRIGHTNESS: Adjusts the overall image and background
screen brightness.
CONTRAST: Adjusts the image brightness in relation to the
background. (Contrast control is also effective with -,+
button even though OSM window is not visible.)
R Red Color Control: Adjust the red contrast of the display.
G Green Color Control: Adjust the green contrast of the
display.
B Blue Color Control: Adjust the blue contrast of the display.
Horizontal: Moves the image horizontally left or right.
Vertical position: Moves the image vertically up or down.
Horizontal size: Decreases or increases the horizontal size
of the image.
Vertical size: Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.
Pincushion/Barrel: Decreases or increases the curvature of
the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the screen
to be the same as the top.
01b_english 01.11.2000, 11:49 Uhr7
English-8
Parallelogram: Decreases or increases the tilt of the sides
either to the left or right.
Bow (Pincushion Balance): Decreases or increases the
curvature of the sides either to the left or right.
Rotates: Rotates the image.
Degauss: Select the degauss icon on Icon select window
and push SELECT button. It will eliminate the stray
magnetic field and correct the scan of the electron beam,
which affect the purity, focus and convergence.
Note: Allow a minimum interval of 20 minutes to elapse
between uses of the degauss function.
Color Temperature: Select the Color Temperature icon on
Icon Select Window and push SELECT button.
It can be switched to change the color Temperature.
(9300K, 7550K, 6550K, user)
OSD: There are 3 background colours (Blue, Black, and
white). These can be selected by SELECT button after the
selection of OSD on Icon select window.
EXIT: To exit OSM window. Select EXIT on Icon select
window, then push SELECT button.
MultiSync V921
EXIT: To exit OSM window. Select ESC on Icon select
window, then push SELECT button.
Horizontal Moiré Canceler: Reduces horizontal moiré
levels.
Vertical Moiré Canceler: Reduces vertical moiré levels.
Note: If you do not push buttons within 10 seconds in
OSM condition, the window will automatically
disappear.
exit
(V521/V721)
9300
(V921)
9300K
(V521/V721)
01b_english 01.11.2000, 11:49 Uhr8
English-9
English
Recommended use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE
NOTE THE FOLLOWING WHEN SETTING UP
AND USING THE MULTISYNC V SERIES
COLOUR MONITOR:
DO NOT OPEN THE MONITOR. There are no user serviceable parts
inside and opening or removing covers may expose you to dangerous
shock hazards or other risks. Refer all servicing to qualified service
personnel.
Use the monitor in a clean, dry area.
Do not spill any liquids into the cabinet or use your monitor near
water.
Do not insert objects of any kind into the cabinet slots, as the may
touch dangerous voltage points, which can be harmful or fatal or may
cause electric shock, fire or equipment failure.
Do not place any heavy objects on the power cord. Damage to the
cord may cause shock or fire.
Do not place this product on a sloping or unstable cart, stand or table,
as the monitor may fall, causing serious damage to the monitor.
Keep the monitor away from high capacity transformers, electric
monitors and other devices such as external speakers or fans, which
may create strong magnetic fields.
If possible, position the monitor so that it is facing the east to minimize
the effects of the earths magnetic field.
Changing the direction of the monitor while it is powered on may
cause image discoloration. To correct this, turn the monitor off for
20 minutes before powering it back on.
To separate the equipment from the power source you have to
remove the plug from the inlet socket.
When operating the MultiSync V Series with it is AC 220-240V
worldwide power supply, use a power supply cord that matches the
power supply voltage of the AC power outlet being used. The power
supply cord you use must have been approved by and comply with
the safety standards of your country. (Type H05VV-F should be used
except in UK)
01b_english 01.11.2000, 11:49 Uhr9
English-10
In UK, use a BS-approved power cord with molded plug having a
black (5A) fuse installed for use with this monitor. If a power cord is
not supplied with this monitor, please contact you supplier.
Immediately unplug your monitor from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
When the power supply cord or plug is damaged.
If liquit has been spilled, or objects have fallen into the monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet damaged.
If the monitor does not operate normally by following operating
instructions.
Allow adequate ventilation around the monitor so that
heat can properly dissipate. Do not block ventilated
openings or place them monitor near a radiator or
other heat sources. Do not put an thing on top of
monitor.
The power cable connector is the primary means of
detaching the system from the power supply. The
monitor should be installed close to a power outlet
which is easily accessible.
Handle with care when transporting. Save packaging
for transporting.
CORRECT PLACEMENT AND ADJUSTMENT OF
THE MONITOR CAN REDUCE EYE, SHOULDER
AND NECK FATIGUE. CHECK THE FOLLOWING
WHEN YOU POSITION THE MONITOR:
Caution
01b_english 01.11.2000, 11:49 Uhr10
English-11
English
Adjust the monitor height so that the top of the screen is at or slightly
below eye level. Your eyes should look slightly downward when
viewing the middle of the screen.
Position your monitor no closer than 30 cm and no further away than
70 cm from your eyes. The optimal distance is 45 cm.
Rest your eyes periodically by focusing on an object at least 6 m
away. Blink often.
Position the monitor at a 90° Xangle to windows and other light
sources to minimize glare and reflections. Adjust the monitor tilt so
that ceiling lights do not reflect on your screen.
If reflected light makes it hard for you to see your screen, use an anti-
glare filter.
Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a
non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner
to minimize dust.
Adjust the monitorís brightness and contrast controls to enhance
readability.
Use a document holder placed close to the screen.
Position whatever you are looking at most of the time (the screen or
reference material) directly in front of you to minimize turning your
head while you are typing.
Get regular eye checkups.
Ergonomics
To realize the maximum ergonomics benefits, we recommend the
following:
Adjust the brightness until the background raster disappears.
Do not position the contrast controls to its maximum setting.
Use the preset size and position controls with standard signals.
Use the preset color setting and sides Left/Right controls.
Use non-interlaced signals with a vertical refresh rate between
75-120Hz (V521/V721) and 75-160 Hz (V921).
Do not use primary color blue on a dark background, as it is difficult to
see and may produce eye fatigue due to insufficient contrast.
01b_english 01.11.2000, 11:49 Uhr11
English-12
01b_english 01.11.2000, 11:49 Uhr12
âesky-1
âesky
Prohlá‰ení v˘robce
Tímto prohla‰ujeme, Ïe barevné monitory
MultiSync V521(N0501)
MultiSync V721(N0701)
MultiSync V921(N9902)
je v souladu se
smûrnicemi 73/23/EEC:
- EN 60950
smûrnicemi 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
a opatfien oznaãením
NEC-Mitsubishi Electric Visual Systems, Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
02b_Czech 01.11.2000, 11:49 Uhr1
âesky-2
Bezpeãnostní pokyny
Upozornûní:
Pfii provozu monitoru MultiSync V521/V721/V921 v síti se stfiídav˘m napûtím
220-240V v Evropû kromû Spojeného království pouÏívejte napájecí ‰ÀÛru
dodávanou s monitorem.
Ve Spojeném království se smí pouÏívat k tomuto monitoru jen schválená
‰ÀÛra BS se zalitou zástrãkou a s ãernou pojistkou (5A). Není-li napájecí
‰ÀÛra souãástí zafiízení, spojte se s dodavatelem.
Pfii provozu monitoru MultiSync V521/V721/V921 v síti se stfiídav˘m napûtím
220-240V v Austrálii pouÏívejte napájecí ‰ÀÛru dodávanou s monitorem.
Ve v‰ech ostatních pfiípadech pouÏívejte napájecí ‰ÀÛru, která se shoduje se
stfiídav˘m napûtím zásuvky a která vyhovuje bezpeãnostním pfiedpisÛm
dané zemû.
Produkt ENERGY STAR
®
Spoleãnost NEC-Mitsubishi Electronics Display of America Inc. jako partner
ENERGY STAR urãila, Ïe tento produkt splÀuje poÏadavky smûrnic ENERGY STAR
pro efektivní vyuÏití energie. Znak ENERGY STAR nepfiedstavuje podporu EPA
akéhokoli produktu nebo sluÏby.
IBM je registrovaná ochranná známka spoleãnosti International Business Machines Corporation
Apple a Macintosh jsou registrované ochranné známky spoleãnosti Apple Computer Inc.
Microsoft a Windows jsou registrované ochranné známky spoleãnosti Microsoft Corporation.
ENERGY STA R je v USA registrovaná známka.
NEC je registrovaná ochranná známka spoleãnosti NEC Corporation.
V‰echny ostatní ochranné známky nebo registrované ochranné známky jsou majetkem
pfiíslu‰n˘ch vlastníkÛ.
02b_Czech 01.11.2000, 11:49 Uhr2
âesky-3
âesky
Obsah
Balení monitoru* fiady V by mûlo obsahovat následující poloÏky:
Monitor MultiSync fiady V s naklápûcím a otoãn˘m podstavcem
MultiSyncV521, MultiSync V721 nebo MultiSync V921
Napájecí ‰ÀÛra
Statick˘ signální kabel
UÏivatelskou pfiíruãku
CD-ROM obsahuje kompletní uÏivatelskou pfiíruãku ve formátu PDF
asoubory pro systém Windows (soubor Inf a barevn˘ profil). Pro
zobrazení kompletní uÏivatelské pfiíruãky musíte mít na poãítaãi
nainstalovanou aplikaci Acrobat Reader 4.0.
* PÛvodní krabice a balicí materiál si uschovejte pro pfiípadnou pfiepravu
monitoru.
02b_Czech 01.11.2000, 11:49 Uhr3
âesky-4
Pfiipevnûní a odstranûní
naklápûcího a otoãného
podstavce
Pfiipevnûní
Tento produkt zahrnuje monitor MultiSync a naklápûcí a otoãn˘ podstavec.
Pfiipevnûní naklápûcího a otoãného podstavce k monitoru MultiSync
proveìte podle níÏe uveden˘ch pokynÛ.
Zatlaãte v‰ech ‰est západek naklápûcího a otoãného podstavce do ‰esti
otvorÛ ve spodní ãásti monitoru MultiSync.
Pak naklápûcí a otoãn˘ podstavec nasuÀte.
Západka naklápûcího a otoãného podstavce zajistí spojení s monitorem.
Sejmutí
Pfii pfiepravû monitoru do opravny je tfieba naklápûcí a otoãn˘ podstavec
sejmout.
Západku monitoru MultiSync zatlaãte dolÛ a vysuÀte naklápûcí a otoãn˘
podstavec.
Z ãelní strany monitoru MultiSync posuÀte naklápûcí a otoãn˘ podstavec
smûrem dozadu.
VysuÀte naklápûcí a otoãn˘ podstavec z otvorÛ monitoru MultiSync.
02b_Czech 01.11.2000, 11:49 Uhr4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137

NEC MultiSync® V521 Manuale del proprietario

Tipo
Manuale del proprietario
Questo manuale è adatto anche per