NEC MultiSync® V521 Manuale del proprietario

MultiSync V521

MultiSync V721

MultiSync V921

User’s Manual

UÏivatelská pﬁíruãka

Bedienerhandbuch

δηγίες ρήσης

Manual del usuario

Manuel Utilisateur

Manuale utente

Gebruikershandleiding

Podr´cznik u˝ytkowinka

Руководство пользователя

Kullan∂c∂ Klavuzu

00Cover_all.p65 01.11.2000, 11:48 Uhr1

FCC Information

1. Use the attached specified cables with the N0501/N0701/N9902

color monitor so as not to interfere with radio and television

reception.

(1) Please use the supplied power cable or equivalent to ensure

FCC compliance.

(2) Shielded captive type signal cable.

Use of other cables may cause interference with radio and

television reception.

2. This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/

television technician for additional suggestions. The user may find the

following booklet, prepared by the Federal Communications Commission,

helpful: “How to Identify and Resolve Radio-TV Interference Problems”.

This booklet is available from the U.S. Government Printing Office,

Washington, D.C., 20402, Stock No. 004-000-00345-4.

00Cover_all.p65 03.11.2000, 14:39 Uhr2

English

âesky

Deutsch

Ελληνικά

Español

Français

Italiano

Nederlands

Polski

Русский

Türkçe

01b_XChapterOpener 01.11.2000, 11:48 Uhr1

01b_XChapterOpener 01.11.2000, 11:48 Uhr2

English-1

English

Declaration of the Manufacturer

We hereby certify that the colour monitors

MultiSync V521(N0501)

MultiSync V721(N0701)

MultiSync V921(N9902)

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 50082-1

(IEC 801-2)

(IEC 801-3)

(IEC 801-4)

and marked with

NEC-Mitsubishi Electric Visual Systems Corporation

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

01b_english 01.11.2000, 11:48 Uhr1

English-2

Safety Instruction

Caution:

When operating the MultiSync V521/V721/V921 with a 220-240V AC

power source in Europe except UK, use the power cord provided with the

monitor.

In UK, a BS approved power cord with moulded plug has a Black (five

Amps) fuse installed for use with this equipment. If a power cord is not

supplied with this equipment please contact your supplier.

When operating the MultiSync V521/V721/V921 with a 220-240V AC

power source in Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the

power outlet and has been approved by and complies with the safety

standard of your particular country.

ENERGY STAR

®

Product

As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display of

America Inc. has determined that this product meets the ENERGY STAR

guidelines for energy efficiency. The ENERGY STA R emblem does not

represent EPA endorsement of any product or service.

IBM is registered trademark of International Business Machines Corporation

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

ENERGY STA R is a U.S. registered mark.

NEC is a registered trademark of NEC Corporation.

All other trademarks or registered trademarks are property of their respective owners.

01b_english 01.11.2000, 11:48 Uhr2

English-3

English

Contents

V Series monitor box* should contain the following:

• MultiSync V Series Monitor with tilt / swivel base MultiSync V521,

MultiSync V721 or MultiSync V921

• Power cord

• Captive Signal Cable

• User‘s manual

• CD-ROM includes complete User‘s Manual in PDF format and

Windows related files (Inf file and color profile). To see the complete

User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.

* Remember to save your original box and packing material to transport

or ship the monitor.

01b_english 01.11.2000, 11:48 Uhr3

English-4

Tilt / swivel base fixing,

removing

Fixing

This product consists of the MultiSync monitor and the tilt / swivel base.

When fixing the tilt / swivel base to the MultiSync monitor, please follow

the steps below.

• Push the six hooks of the tilt / swivel base into the six holes at the

bottom of the MultiSync monitor.

• Then slide the tilt /swivel base forward.

• Then the latch above the tilt / swivel base engages it is secure.

Removing

Please removing the tilt / swivel base when transporting for repair.

• Push down the latch of the MultiSync monitor and pull out the tilt /

swivel base.

• Slide backward the tilt / swivel base from the front of the MultiSync

monitor.

• Pull out the tilt / swivel base from the holes of the MultiSync monitor.

01b_english 01.11.2000, 11:48 Uhr4

English-5

English

Quick Start

To attach the MultiSync V Series monitor to your

system, follow these instruction:

1. Turn off the power to your computer and MultiSync monitor.

2. If necessary, install the display card. For more information, refer to the

display card manual.

3. For the PC: Connect the 15-pin mini D-SUB of the captive signal

cable to the connector of the display card in your system (Figure A.1)

Tighten all screws.

For the Mac: Connect the Macintosh Cable Adapter (not included) to

the monitor connector on the Macintosh (Figure B.1). Attach the

15-pin mini D-SUB end of the captive signal cable to the Macintosh

cable adapter on the computer (Figure B.1). Tighten all screws.

4. Connect one end of the power cord to the MultiSync V Series monitor

and the other end to the power outlet (Figure C.1).

5. Turn on the monitor (Figure D.1) and the computer.

6. This completes the installation.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this User‘s Manual.

Captive Signal Cable

15-pin-mini-D-SUB

Figure A.1

01b_english 01.11.2000, 11:48 Uhr5

English-6

Figure B.1

Figure C.1

Figure D.1

Computer

Mac Adapter

(not included)

15-pin mini D-SUB

Captive Signal Cable

Power Outlet

Power cord

01b_english 01.11.2000, 11:48 Uhr6

English-7

English

Controls

OSM (On-screen Manager) control buttons on the

front of the monitor function as follows:

SELECT Enters and exits the OSM menu.

CONTROL-/+ Selects one of the controls and decreases or increases

the adjustment.

RESET Resets the highlighted control to the factory setting.

Press -/+ button at the same time for approximately

1 sec.

BRIGHTNESS: Adjusts the overall image and background

screen brightness.

CONTRAST: Adjusts the image brightness in relation to the

background. (Contrast control is also effective with “-,+”

button even though OSM window is not visible.)

R Red Color Control: Adjust the red contrast of the display.

G Green Color Control: Adjust the green contrast of the

display.

B Blue Color Control: Adjust the blue contrast of the display.

Horizontal: Moves the image horizontally left or right.

Vertical position: Moves the image vertically up or down.

Horizontal size: Decreases or increases the horizontal size

of the image.

Vertical size: Decreases or increases the vertical size of the

image.

The Geometry controls allow you to adjust the curvature or angle of the

sides of your display.

Pincushion/Barrel: Decreases or increases the curvature of

the sides either inward or outward.

Trapezoid: Decreases or increases the bottom of the screen

to be the same as the top.

01b_english 01.11.2000, 11:49 Uhr7

English-8

Parallelogram: Decreases or increases the tilt of the sides

either to the left or right.

Bow (Pincushion Balance): Decreases or increases the

curvature of the sides either to the left or right.

Rotates: Rotates the image.

Degauss: Select the degauss icon on “Icon select window”

and push “SELECT” button. It will eliminate the stray

magnetic field and correct the scan of the electron beam,

which affect the purity, focus and convergence.

Note: Allow a minimum interval of 20 minutes to elapse

between uses of the degauss function.

Color Temperature: Select the Color Temperature icon on

“Icon Select Window” and push “SELECT” button.

It can be switched to change the color Temperature.

(9300K, 7550K, 6550K, user)

OSD: There are 3 background colours (Blue, Black, and

white). These can be selected by “SELECT” button after the

selection of “OSD” on “Icon select window”.

EXIT: To exit OSM window. Select EXIT on “Icon select

window”, then push “SELECT” button.

MultiSync V921

EXIT: To exit OSM window. Select ESC on “Icon select

window”, then push “SELECT” button.

Horizontal Moiré Canceler: Reduces horizontal moiré

levels.

Vertical Moiré Canceler: Reduces vertical moiré levels.

Note: If you do not push buttons within 10 seconds in

OSM condition, the window will automatically

disappear.

exit

(V521/V721)

9300

(V921)

9300K

(V521/V721)

01b_english 01.11.2000, 11:49 Uhr8

English-9

English

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE

NOTE THE FOLLOWING WHEN SETTING UP

AND USING THE MULTISYNC V SERIES

COLOUR MONITOR:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts

inside and opening or removing covers may expose you to dangerous

shock hazards or other risks. Refer all servicing to qualified service

personnel.

• Use the monitor in a clean, dry area.

• Do not spill any liquids into the cabinet or use your monitor near

water.

• Do not insert objects of any kind into the cabinet slots, as the may

touch dangerous voltage points, which can be harmful or fatal or may

cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the

cord may cause shock or fire.

• Do not place this product on a sloping or unstable cart, stand or table,

as the monitor may fall, causing serious damage to the monitor.

• Keep the monitor away from high capacity transformers, electric

monitors and other devices such as external speakers or fans, which

may create strong magnetic fields.

• If possible, position the monitor so that it is facing the east to minimize

the effects of the earth‘s magnetic field.

• Changing the direction of the monitor while it is powered on may

cause image discoloration. To correct this, turn the monitor off for

20 minutes before powering it back on.

• To separate the equipment from the power source you have to

remove the plug from the inlet socket.

• When operating the MultiSync V Series with it is AC 220-240V

worldwide power supply, use a power supply cord that matches the

power supply voltage of the AC power outlet being used. The power

supply cord you use must have been approved by and comply with

the safety standards of your country. (Type H05VV-F should be used

except in UK)

01b_english 01.11.2000, 11:49 Uhr9

English-10

• In UK, use a BS-approved power cord with molded plug having a

black (5A) fuse installed for use with this monitor. If a power cord is

not supplied with this monitor, please contact you supplier.

Immediately unplug your monitor from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged.

• If liquit has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating

instructions.

• Allow adequate ventilation around the monitor so that

heat can properly dissipate. Do not block ventilated

openings or place them monitor near a radiator or

other heat sources. Do not put an thing on top of

monitor.

• The power cable connector is the primary means of

detaching the system from the power supply. The

monitor should be installed close to a power outlet

which is easily accessible.

• Handle with care when transporting. Save packaging

for transporting.

CORRECT PLACEMENT AND ADJUSTMENT OF

THE MONITOR CAN REDUCE EYE, SHOULDER

AND NECK FATIGUE. CHECK THE FOLLOWING

WHEN YOU POSITION THE MONITOR:

Caution

01b_english 01.11.2000, 11:49 Uhr10

English-11

English

• Adjust the monitor height so that the top of the screen is at or slightly

below eye level. Your eyes should look slightly downward when

viewing the middle of the screen.

• Position your monitor no closer than 30 cm and no further away than

70 cm from your eyes. The optimal distance is 45 cm.

• Rest your eyes periodically by focusing on an object at least 6 m

away. Blink often.

• Position the monitor at a 90° Xangle to windows and other light

sources to minimize glare and reflections. Adjust the monitor tilt so

that ceiling lights do not reflect on your screen.

• If reflected light makes it hard for you to see your screen, use an anti-

glare filter.

• Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a

non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner

to minimize dust.

• Adjust the monitorís brightness and contrast controls to enhance

readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or

reference material) directly in front of you to minimize turning your

head while you are typing.

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the

following:

• Adjust the brightness until the background raster disappears.

• Do not position the contrast controls to its maximum setting.

• Use the preset size and position controls with standard signals.

• Use the preset color setting and sides Left/Right controls.

• Use non-interlaced signals with a vertical refresh rate between

75-120Hz (V521/V721) and 75-160 Hz (V921).

• Do not use primary color blue on a dark background, as it is difficult to

see and may produce eye fatigue due to insufficient contrast.

01b_english 01.11.2000, 11:49 Uhr11

English-12

01b_english 01.11.2000, 11:49 Uhr12

âesky-1

âesky

Prohlá‰ení v˘robce

Tímto prohla‰ujeme, Ïe barevné monitory

MultiSync V521(N0501)

MultiSync V721(N0701)

MultiSync V921(N9902)

je v souladu se

smûrnicemi 73/23/EEC:

- EN 60950

smûrnicemi 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 50082-1

(IEC 801-2)

(IEC 801-3)

(IEC 801-4)

a opatﬁen oznaãením

NEC-Mitsubishi Electric Visual Systems, Corporation

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

02b_Czech 01.11.2000, 11:49 Uhr1

âesky-2

Bezpeãnostní pokyny

Upozornûní:

Pﬁi provozu monitoru MultiSync V521/V721/V921 v síti se stﬁídav˘m napûtím

220-240V v Evropû kromû Spojeného království pouÏívejte napájecí ‰ÀÛru

dodávanou s monitorem.

Ve Spojeném království se smí pouÏívat k tomuto monitoru jen schválená

‰ÀÛra BS se zalitou zástrãkou a s ãernou pojistkou (5A). Není-li napájecí

‰ÀÛra souãástí zaﬁízení, spojte se s dodavatelem.

Pﬁi provozu monitoru MultiSync V521/V721/V921 v síti se stﬁídav˘m napûtím

220-240V v Austrálii pouÏívejte napájecí ‰ÀÛru dodávanou s monitorem.

Ve v‰ech ostatních pﬁípadech pouÏívejte napájecí ‰ÀÛru, která se shoduje se

stﬁídav˘m napûtím zásuvky a která vyhovuje bezpeãnostním pﬁedpisÛm

dané zemû.

Produkt ENERGY STAR

®

Spoleãnost NEC-Mitsubishi Electronics Display of America Inc. jako partner

ENERGY STAR urãila, Ïe tento produkt splÀuje poÏadavky smûrnic ENERGY STAR

pro efektivní vyuÏití energie. Znak ENERGY STAR nepﬁedstavuje podporu EPA

akéhokoli produktu nebo sluÏby.

IBM je registrovaná ochranná známka spoleãnosti International Business Machines Corporation

Apple a Macintosh jsou registrované ochranné známky spoleãnosti Apple Computer Inc.

Microsoft a Windows jsou registrované ochranné známky spoleãnosti Microsoft Corporation.

ENERGY STA R je v USA registrovaná známka.

NEC je registrovaná ochranná známka spoleãnosti NEC Corporation.

V‰echny ostatní ochranné známky nebo registrované ochranné známky jsou majetkem

pﬁíslu‰n˘ch vlastníkÛ.

02b_Czech 01.11.2000, 11:49 Uhr2

âesky-3

âesky

Obsah

Balení monitoru* ﬁady V by mûlo obsahovat následující poloÏky:

• Monitor MultiSync ﬁady V s naklápûcím a otoãn˘m podstavcem

MultiSyncV521, MultiSync V721 nebo MultiSync V921

• Napájecí ‰ÀÛra

• Statick˘ signální kabel

• UÏivatelskou pﬁíruãku

• CD-ROM obsahuje kompletní uÏivatelskou pﬁíruãku ve formátu PDF

asoubory pro systém Windows (soubor Inf a barevn˘ profil). Pro

zobrazení kompletní uÏivatelské pﬁíruãky musíte mít na poãítaãi

nainstalovanou aplikaci Acrobat Reader 4.0.

* PÛvodní krabice a balicí materiál si uschovejte pro pﬁípadnou pﬁepravu

monitoru.

02b_Czech 01.11.2000, 11:49 Uhr3

âesky-4

Pﬁipevnûní a odstranûní

naklápûcího a otoãného

podstavce

Pﬁipevnûní

Tento produkt zahrnuje monitor MultiSync a naklápûcí a otoãn˘ podstavec.

Pﬁipevnûní naklápûcího a otoãného podstavce k monitoru MultiSync

proveìte podle níÏe uveden˘ch pokynÛ.

• Zatlaãte v‰ech ‰est západek naklápûcího a otoãného podstavce do ‰esti

otvorÛ ve spodní ãásti monitoru MultiSync.

• Pak naklápûcí a otoãn˘ podstavec nasuÀte.

• Západka naklápûcího a otoãného podstavce zajistí spojení s monitorem.

Sejmutí

Pﬁi pﬁepravû monitoru do opravny je tﬁeba naklápûcí a otoãn˘ podstavec

sejmout.

• Západku monitoru MultiSync zatlaãte dolÛ a vysuÀte naklápûcí a otoãn˘

podstavec.

• Z ãelní strany monitoru MultiSync posuÀte naklápûcí a otoãn˘ podstavec

smûrem dozadu.

• VysuÀte naklápûcí a otoãn˘ podstavec z otvorÛ monitoru MultiSync.

02b_Czech 01.11.2000, 11:49 Uhr4

La pagina sta caricando ...

NEC MultiSync® V521 Manuale del proprietario

Questo manuale è adatto anche per

NEC MultiSync® V521 Manuale del proprietario

in altre lingue

Documenti correlati