Philips S9031/26 Manuale utente

S91xx/S90xx

1

PlusPlus

31 2

1

2

3

1 2

3

4 5

1

2

3

4

5

1 2

3

4

PlusBasic

4

3

3MO

3

1

2

1

4

2

5

6

7 8

1M

8 9

10

4 5

6

2 31

7

S91XX, S90XX

ENGLISH 12

ESPAÑOL 40

FRANÇAIS 69

ITALIANO 98

PORTUGUÊS 127

TÜRKÇE 156

12

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips

offers, register your product at www.philips.com/

welcome.

Please read this user manual, as it contains information

about the features of this shaver as well as some tips

to make shaving easier and more enjoyable.

General description (Fig. 1)

1 Comb for beard styler attachment

2 Click-on beard styler attachment

3 Click-on trimmer attachment

4 Click-on shaving unit

5 On/off button

6 Socket for small plug

7 Exclamation mark

8 Replacement reminder

9 Battery charge indicator

10 Travel lock symbol

11 Cleaning reminder

12 Replacement symbol

13 SmartClean system

14 Cap of SmartClean system

15 On/off button

16 Cleaning symbol

17 Drying symbol

18 Ready symbol

19 Charge symbol

20 Cleaning cartridge for SmartClean system

21 Adapter

22 Small plug

23 Retaining ring holder

24 Pouch

ENGLISH

Note: The accessories supplied may vary for different

products. The box shows the accessories that have been

supplied with your appliance.

Important

Read this user manual carefully before you use the

shaver and the SmartClean system. Save this user

manual for future reference.

Danger

- Keep the adapter dry.

Warning

- The adapter contains a transformer. Do not cut

off the adapter to replace it with another plug,

as this causes a hazardous situation.

- This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use

of the appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not

be made by children without supervision.

- Always unplug the shaver before you clean it

under the tap.

Caution

- Never immerse the SmartClean system in water

nor rinse it under the tap.

- Never use water hotter than 80°C to rinse the

shaver.

- Do not use the shaver, SmartClean system, adapter

or any other part if it is damaged, as this

may

cause injury. Always replace a damaged adapter

or part with one of the original type.

ENGLISH 13

- Only use the SmartClean system with the original

cleaning cartridge.

- Always place the SmartClean system on a stable,

level and horizontal surface to prevent leakage.

- Always make sure that the cartridge compartment

is closed before you use the SmartClean system

to clean or charge the shaver.

- When the SmartClean system is ready for use,

do not move it to prevent leakage of cleaning uid.

- The SmartClean system thoroughly cleans but

does not disinfect your shaver, therefore do not

share the shaver with others.

- Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as petrol

or acetone to clean the appliance.

- Water may leak from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the shaver.

Compliance with standards

- This shaver is waterproof and complies with the

internationally approved safety regulations. It is

suitable for use in the bath or shower and for

cleaning under the tap. For safety reasons, the

shaver can therefore only be used cordlessly.

- The shaver and the SmartClean system comply

with all applicable standards and regulations

regarding exposure to electromagnetic elds.

General

- The adapter is equipped with an automatic

voltage selector and is suitable for mains voltages

ranging from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe

low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

ENGLISH14

The display

Note: Before you use the shaver for the rst time,

remove the protective foil from the display.

- S91XX/S90XX

Charging

- Charging takes approx. 1 hour.

Note: This appliance can only be used cordlessly.

- Quick charge: When you connect the appliance

to the mains, it produces a sound. Then the lights

of the battery charge indicator light up one after

the other continuously. When the shaver contains

enough energy for one shave, the bottom light of

the battery charge indicator starts to ash slowly.

- If you leave the appliance connected to the

mains, the charging process continues. To indicate

that the appliance is charging, rst the bottom

light ashes white and then lights up white

continuously. Then the second light ashes and

then lights up continuously, and so on until the

shaver is fully charged.

Battery fully charged

Note: This appliance can only be used cordlessly.

Note: When the battery is full, the display switches

off automatically after 30 minutes. When you press

the on/off button during or after charging, you hear a

sound to indicate that the shaver is still connected to

the mains.

ENGLISH 15

- When the battery is fully charged, all lights of

the battery charge indicator light up white

continuously.

Battery low

- When the battery is almost empty, the bottom

light ashes orange and you hear a sound.

Remaining battery capacity

- The remaining battery capacity is indicated by the

lights of the battery charge indicator that light up

continuously.

Cleaning reminder

For optimal shaving performance, we advise you to

clean the shaver after every use.

- When you switch off the shaver, the cleaning

reminder ashes to remind you to clean the

shaver.

Travel lock

You can lock the shaver when you are going to

travel. The travel lock prevents the shaver from being

switched on by accident.

ENGLISH16

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

, While you activate the travel lock, the travel lock

symbol lights up white continuously. When the

travel lock is activated, the shaver produces a

sound and the travel lock symbol ashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

, The travel lock symbol ashes and then lights

up continuously.

The shaver is now ready for use again.

Note: You can also deactivate the travel lock by

connecting the appliance to the mains.

Replacing shaving heads

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

- The appliance is equipped with a replacement

reminder which reminds you to replace the

shaving heads. The replacement reminder lights

up white continuously and the arrows ash white.

You hear a beep to indicate you have to replace

the shaving heads.

Note: After replacing the shaving heads, you need

to reset the shaver by pressing the on/off button for

7 seconds.

ENGLISH 17

Exclamation mark

Blocked shaving heads

- If the shaving heads are blocked, the exclamation

mark lights up orange continuously. The replacement

reminder and the cleaning reminder ash white

alternately and you hear a sound. In this case,

the motor cannot run because the shaving heads

are soiled or damaged.

- When this happens, you have to clean the shaving

heads or replace them.

Overheating

- If the appliance overheats during charging, the

exclamation mark ashes orange.

- When this happens, the shaver automatically

switches off. Charging continues once the

appliance is back to the normal temperature.

Charging

Charging takes approx. 1 hour.

A fully charged shaver has a shaving time of up to

50 minutes.

Note: You cannot use the appliance while charging.

Charge the shaver before you use it for the rst

time and when the display indicates that the battery

is almost empty .

ENGLISH18

Charging with the adapter

1 Make sure the appliance is switched off.

2 Insert the small plug into the appliance (1)

and put the adapter in the wall socket (2).

Charging in the SmartClean system

(specic types only)

1 Put the small plug in the SmartClean system.

2 Put the adapter in the wall socket.

3 Press the top cap to be able to place the

shaver in the holder (‘click’).

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system.

5 Place the shaver in the holder (1), tilt the

shaver backwards (2) and press down the top

cap to connect the shaver (‘click’) (3).

Note: The battery symbol ashes slowly to indicate the

appliance is charging.

ENGLISH 19

Using the shaver

Shaving

Skin adaptation period

Your rst shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system.

We advise you to shave regularly (at least 3 times a

week) with this shaver for a period of 3 weeks

to allow your skin to adapt to the new shaver.

Tip: To ensure the best result, we advise you to pre-trim

your beard if you have not shaved for 3 days or longer.

Note: This appliance can only be used cordlessly.

1 Press the on/off button once to switch on

the shaver.

, The display lights up for a few seconds.

2 Move the shaving heads over your skin in

circular movements.

- Do not make straight movements.

3 Press the on/off button once to switch off

the shaver.

, The display lights up for a few seconds and then

shows the remaining battery charge.

Wet shaving

You can also use this shaver on a wet face with

shaving foam or shaving gel.

To shave with shaving foam or shaving gel,

follow the steps below:

ENGLISH20

La pagina si sta caricando...

Philips S9031/26 Manuale utente

Philips S9031/26 Manuale utente

in altre lingue

Documenti correlati

Altri documenti