Asus R680EA-IM-A Manuale utente

Industrial Motherboard

R680EA-IM-A

ii

E22053

First Edition

June 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

iii

Contents

Chapter 1: Product Overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Central Processing Unit (CPU) ................................................... 2-4

2.3.1 CPU installation .............................................................. 2-5

2.3.2 CPU heatsink and fan assembly installation ................... 2-7

2.4 System memory ........................................................................... 2-9

2.5 Jumpers ...................................................................................... 2-10

2.6 Connectors ................................................................................. 2-16

2.6.1 Rear panel connectors .................................................. 2-16

2.6.2 Internal connectors ....................................................... 2-18

2.7 Slots ............................................................................................ 2-31

Chapter 3: BIOS setup

3.1 BIOS Setup program .................................................................... 3-1

3.2 Main menu .................................................................................... 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 PCH-FW Configuration ................................................... 3-2

3.3.2 Trusted Computing ......................................................... 3-3

3.3.3 CPU Configuration .......................................................... 3-4

3.3.4 Graphics Configuration ................................................... 3-5

3.3.5 Power Management ....................................................... 3-5

3.3.6 PCI Express Configuration .............................................. 3-6

3.3.7 Super IO Configuration ................................................... 3-8

3.3.8 Serial Console Redirection ........................................... 3-10

3.3.9 SATA Configuration ...................................................... 3-13

3.3.10 VMD setup menu .......................................................... 3-13

3.3.11 Network Stack Configuration ........................................ 3-13

3.3.12 USB Configuration ........................................................ 3-14

3.3.13 NVMe Configuration ...................................................... 3-15

iv

3.3.14 Onboard Devices Configuration .................................... 3-15

3.3.15 APM Configuration ........................................................ 3-16

3.3.16 EZ-Flash ....................................................................... 3-17

3.3.17 Watchdog Timer ............................................................ 3-18

3.4 Hardware Monitor menu ............................................................ 3-18

3.5 Security menu ............................................................................ 3-19

3.5.1 Administrator Password ................................................ 3-19

3.5.2 User Password .............................................................. 3-20

3.5.3 Secure Boot .................................................................. 3-20

3.6 Boot menu .................................................................................. 3-21

3.7 Exit menu .................................................................................... 3-21

Appendix

Notices .......................................................................................................A-1

Service and Support .................................................................................A-5

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x ASUS R680EA-IM-A Motherboard

1 x Serial ATA 6.0 Gb/s cable

1 x M.2 screw package

1 x ASUS I/O Shield

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel® socket LAG1700 for 12th Gen Intel® Core™ i9/ i7/ i5/ i3, Pentium®, and

Celeron® processors; Max. 125W TDP

• Four Dual Channel DDR5 U-DIMMs up to 128GB

• 7 x SATA 6.0 Gb/s, 6 x USB 3.2 Gen 2, 4 x USB 3.2 Gen 1, 4 x USB 2.0,

6 x COM ports

• 2 x PCIe x16 slots, 3 x PCIe x4 slots, 2 x PCI slots, 1 x M.2 (Key E, 2230) for

WiFi/BT device (only supports Intel® CNVi), 1 x M.2 (Key M, 2242/2260/2280)

with PCIe x4 and SATA modes supporting NVMe

• Multi-display: 2 x DisplayPort, 1 x HDMI™ port, 1 x VGA port

Chapter 1

Product overview

R680EA-IM-A

1-2

1.3 Specifications

(continued on the next page)

CPU

Intel® socket LGA1700 for 12th Gen Intel® Core™ i9/

i7/ i5/ i3, Pentium®, and Celeron® processors

Supports up to 125W TDP

Chipset Intel® R680E Chipset

Memory

4 x U-DIMM, max. 128GB

DDR5 4400MT/s (2DPC - 1DIMM 1R&2R) (ECC support)*

4000MT/s (2DPC – 2DIMM 1R)

3600MT/s (2DPC – 2DIMM 2R)

*ECC is available only while using ECC memory.

Graphics

Multi-VGA output support: DP/HDMI/VGA ports

- Supports 2 x DisplayPort 1.4 outputs with a maximum

resolution of 3840 x 2160 @ 60 Hz

- Supports an HDMI™ 2.1 output with a maximum

resolution of 4096 x 2160 @ 60 Hz

- Supports a VGA output

Expansion slots

1 x PCIe 5.0 x16 slot (1 x16 mode / 2 x8 modes)

1 x PCIe 4.0 x4 slot (x4 mode, open slot)

1 x PCIe 5.0 x16 slot (x8 mode)

1 x PCIe 3.0 x4 slot (x4 mode, open slot)

1 x PCIe 4.0 x4 slot (x4 mode, open slot)

2 x PCI slots

1 x M.2 (Key E, 2230) with PCIe and CNVi modes for WiFi/

BT devices only supporting Intel® CNVi*

1 x M.2 (Key M, 2242/2260/2280) with PCIe x4 and SATA

modes supporting NVMe

* If a CNVI Wi-Fi card is intsalled on the M.2 E Key slot,

USB port 14 will be disabled.

Storage 7 x SATA 6.0 Gb/s ports

Supports RAID 0,1,5,10

LAN

3 x Intel® Lan controllers:

1 x Intel® I210AT

1 x Intel® I226V

1 x Intel® I226LM (Intel vPro supported)

Audio Realtek ALC897

1-3

Chapter 1: General information

Rear panel I/O ports

1 x HDMI™ port

2 x DisplayPort

1 x VGA port

6 x USB 3.2 Gen 2 ports (5 x Type-A + 1 x Type-C®)

3 x LAN (RJ45) ports

1 x COM port (RS232/422/485)

3 x Audio jacks (Line-Out, Line-In, Mic in)

Internal I/O ports

5 x COM Port headers (1 x RS232/422/485, 4 x RS232)

2 x USB 3.2 Gen 1 headers support additional 4 USB 3.2

Gen 1 ports

2 x USB 2.0 headers support adddtional 4 x USB 2.0 ports

1 x CPU Fan header with PWM mode

3 x Chassis Fan headers with PWM mode

1 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x Chassis Intrusion header

1 x Speaker header

1 x S/PDIF header

1 x I2C header

1 x Clear CMOS header

1 x COM Debug header

1 x LPT port header

1 x Buzzer

1 x PS/2 header

1 x Disable ME jumper

1 x AT/ATX mode selection jumper

1 x 24-pin ATX Power connector

1 x 8-pin ATX Power connector

1 x SPI TPM header

GPIO 1 x 8-bit GPIO header

Watch dog timer Yes

Power requirement AT mode / ATX mode

Operation Temperature 0~60°C

Non-Operation

Temperature -40~85°C

Relative Humidity 40°C @ 10%~95%

(continued on the next page)

R680EA-IM-A

1-4

Specifications are subject to change without notice. Please refer to the ASUS

website for the latest specifications.

OS support

Windows® 10 (64-bit)

Windows® IoT Enterprise

Ubuntu

RedHat Enterprise

Fedora Workstation

OpenSUSE

Software support

ASUS IoT Suite

HW Monitor

Power Scheduling

Fan Control

Watch Dog Timer

GPIO

I2C (API only)

Buzzer (API ony)

Linux Sample code

User Interfaces

API

GUI

Certification CE, FCC, BSMI, VCCI, RCM

Form Factor ATX Form Factor, 305mm x 244mm

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, always remove the AC power

by unplugging the power cord from the power outlet. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

R680EA-IM-A

2-2

PCIEX16(G5)_1

PCIEX16(G5)_2

PCI_2

PCI_1

PCIEX4(G4)_1

PCIEX4(G4)_2

PCIEX4(G3)

ASM

1083

TPM

128Mb

BIOS

SPEAKER

CHASSIS

F_PANEL

COM2_SEL

AAFP

SPDIF_OUT

COM1_SEL

ATX_PWR

CHA_FAN2

CHA_FAN1

CPU_FAN

CHA_FAN3

Super

I/O

ALC

897

DIGI+

VRM

24.4cm(9.6in)

DDR5 DIMM_A1 (64bit, 288-pin module)

LGA1700

BATTERY

M.2(SOCKET3)

PCIE SATA IRST

4.0 X4 V V

DDR5 DIMM_A2 (64bit, 288-pin module)

DDR5 DIMM_B1 (64bit, 288-pin module)

DDR5 DIMM_B2 (64bit, 288-pin module)

AUDIO

LAN2_U32G2_34

LAN3_U32G2_78

LAN1_U32G2_1

Intel®

R680E

Intel®

i226V

Intel®

i226LM

Intel®

i210AT

EATX12V

COM4COM3COM2 COM5 COM6 USB_1112

USB_1314

SATA6G_4 SATA6G_5

SATA6G_6

I2C

SATA6G_7

SATA6G_2SATA6G_1 SATA6G_3

KBMS_CON

GPIO_CON

LPT

COM_DEBUG

SMBCLK_SW

SMBDATA_SW

M.2(WIFI)

AT_ATX_SEL

DIS_ME

CLRTC

2260

2242 2280

DP1

DP2

VGA

30.5cm(12in)

1st

U32G1_910U32G1_56

HDMI

COM1

251 3 4 1

1

11416 151716161616 182021 192324

2

1

6

1

7

1

11

1

9

1

10

12

13

22

29

26

25

29

25

26

21

28

27

BUZZER

8

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

Place nine screws into the holes indicated by circles to secure the motherboard

to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN1-3) 2-21

2. ATX Power connectors (24-pin ATX_PWR, 8-pin EATX12V) 2-28

3. M.2 socket 3 (M.2(SOCKET3)) 2-24

4. Intel® LGA1700 CPU socket 2-4

5. DDR5 U-DIMM slots 2-9

6. USB 3.2 Gen 1 connectors (20-1 pin U32G1_910 / U32G1_56) 2-18

7. M.2 Wi-Fi (M.2(WIFI)) 2-24

8. SATA 6.0Gb/s ports (7-pin SATA6G_1-7) 2-23

9. PCIe SMBus Data Connection jumper (3-pin SMBDATA_SW) 2-10

10. PCIe SMBus Clock Connection jumper (3-pin SMBCLK_SW) 2-10

11. SPI TPM header (14-1 pin TPM) 2-20

12. Chassis Intrude header (4-1 pin CHASSIS) 2-14

13. Speaker header (4-pin SPEAKER) 2-23

14. USB 2.0 headers (10-1 pin USB1112 / USB1314) 2-19

15. System Panel header (10-1 pin F_PANEL) 2-22

16. Serial Port connectors (10-1 pin COM2-6) 2-25

17. Clear CMOS header (2-pin CLRTC) 2-15

18. Keyboard and Mouse Port connector (8-pin KBMS_CON) 2-30

19. AT/ATX mode selection jumper (3-pin AT_ATX_SEL) 2-12

20. Disable ME jumper (3-pin DIS_ME) 2-13

21. COM1/2 Ring/+5V/+12V selection jumpers (6-pin COM1_SEL, COM2_SEL) 2-11

22. LPT header (26-1 pin LPT) 2-18

23. Front Panel Audio header (10-1 pin AAFP) 2-27

24. Digital Audio header (4-1 pin SPDIF_OUT) 2-26

25. PCI slots 2-32

26. PCI Express x4 slots 2-31

27. I2C header (6-1 pin I2C) 2-29

28. General Purpose Input/Output connector (10-pin GPIO_CON) 2-20

29. PCI Express x16 slots 2-31

R680EA-IM-A

2-4

Unplug all power cables before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. The manufacturer will

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the socket.

• The product warranty does not cover damage to the socket contacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1700 socket designed for the

12th Gen Intel® Core™ i9/ i7/ i5/ i3, Pentium®, and Celeron® processors.

LGA1700

2-5

Chapter 2: Motherboard information

2.3.1 CPU installation

1

2 3

A

B

A

B

R680EA-IM-A

2-6

4

5

A

B

2-7

Chapter 2: Motherboard information

2.3.2 CPU heatsink and fan assembly installation

To install the CPU heatsink and fan assembly

B

A

B

12

Apply Thermal Interface Material to

the CPU cooling system and CPU

before you install the cooling system,

if necessary.

R680EA-IM-A

2-8

To uninstall the CPU heatsink and fan assembly

A

B

A

1

2-9

Chapter 2: Motherboard information

2.4 System memory

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed

for DDR5 (Double Data Rate 5) memory modules.

A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or

DDR4 module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module

to the DDR5 slot.

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

1st

Recommended memory configurations

DIMM_A2* DIMM_A2*

DIMM_B2*

DIMM_A1

DIMM_A2*

DIMM_B1

DIMM_B2*

R680EA-IM-A

2-10

2.5 Jumpers

1. PCIe SMBus Data Connection jumper (3-pin SMBDATA_SW)

This jumper allows you to enable or disable PCIe SMbus Data Connection.

Set this jumper to pins 1-2 to enable (set to enabled by default) PCIe SMbus

Data Connection and to pins 2-3 to disable it.

2. PCIe SMBus Clock Connection jumper (3-pin SMBCLK_SW)

This jumper allows you to enable or disable PCIe SMbus Clock Connection.

Set this jumper to pins 1-2 to enable (set to enabled by default) PCIe SMbus

Clock Connection and to pins 2-3 to disable it.

21 2 3

Eanble PCIe SMBus connection

(Default)

Disable PCIe SMBus connection

SMBCLK_SW

21 2 3

Eanble PCIe SMBus connection

(Default)

Disable PCIe SMBus connection

SMBDATA_SW

2-11

Chapter 2: Motherboard information

3. COM1/2 Ring/+5V/+12V selection jumpers (6-pin COM1_SEL, COM2_

SEL)

These jumpers allow you to select 5V or 12V depending on your COM

device.

Setting Pins

+12V 1-2

+5V 3-4

Ring (Default) 5-6

RI

(Default)

+5V+12V

COM2_SEL

1

2

3

4

5

6

B

COM1_SEL

A

B

A

Connector type HEADER 2x3p, 2.54mm pitch, S/T

R680EA-IM-A

2-12

4. AT/ATX mode selection jumper (3-pin AT_ATX_SEL)

In ATX mode (default), you will need to manually press the power button to

turn on the system power. In AT mode, the board will automatically turn on

when system power is connected.

Connector type HEADER 1x3p, 2.54mm pitch, S/T

21 2 3

ATX mode

(Default)

AT mode

AT_ATX_SEL

Pins Description

1-2 (Default) ATX mode

2-3 AT mode

La pagina si sta caricando...

Asus R680EA-IM-A Manuale utente

Asus R680EA-IM-A Manuale utente

in altre lingue

Documenti correlati

Altri documenti