Philips HU5930/10 Manuale utente

4241 210 82513

HU5930

HU5931

B

E

G

H

I

J

F

D

A

C

OUTLINE

K

L

M

N

R

S

Q

P

T

O

1

2

EN User manual 1

DE Benutzerhandbuch 18

FR Mode d’emploi 37

IT Manuale utente 56

NL Gebruiksaanwijzing 75

3S

1

3S

HU5931

3S

HU5930

2 hours

41

42

30

31 32 33 34

35 36 37 38

39

40

23 24 25 26

27 28 29

1

11

1

3S

HU5930

3S

HU5931

20 21 22

10

11 12 13 14

15 16 1817

19

3

4 5

6

7

8

9

43

44 45

1EN

English

Contents

1 Important 2

Safety 2

2 You Air Washer 5

Product overview (g. a) 5

Controls Overview (g. b) 6

3 Get started 6

Installing the NanoProtect

lter 6

Preparing for humidication 7

4 Use the appliance 7

Switching on and o 7

Setting the humidity level 8

Changing the fan speed 8

Setting the timer 8

Setting the child lock 9

Using the light on/o function 9

Water level 9

5 Cleaning 10

Cleaning schedule 10

Cleaning the body of the

appliance 10

Cleaning the water tank,

water tray and NanoCloud

rotary humidication wick 10

Cleaning the pre-lter 11

Descaling the NanoCloud

rotary humidication wick 11

6 Replace the lter and wick 12

Understanding the healthy

air protect lock 12

Replacing the NanoProtect

lter 12

Replacing the NanoCloud

rotary humidication wick 13

7 Troubleshooting 14

8 Guarantee and service 16

Order parts or accessories 16

9 Notices 16

Electromagnetic elds (EMF) 16

Recycling 17

2 EN

1 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not let water or any

other liquid or ammable

detergent enter the

appliance to avoid electric

shock and/or a re

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(ammable) detergent to

avoid electric shock and/

or a re hazard.

• Do not spray any

ammable materials

such as insecticides or

fragrance around the

appliance.

• The water in the water

tank is not suitable for

drinking. Do not drink this

water and do not use it to

feed animals or to water

plants. When you empty

the water tank, pour the

water down the drain.

Warning

• Check if the voltage

indicated on the bottom

indicated at the rear of the

appliance corresponds to

the local power voltage

before you connect the

appliance.

• If the power cord is

damaged, you must have

it replaced by Philips, a

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the appliance

if the plug, the power

cord, or the appliance

itself is damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved.

3EN

English

• Cleaning and user

maintenance shall not be

made by children without

supervision.

• Children should be

supervised to ensure that

they do not play with the

appliance.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or

in front of the air inlet.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

vacuum cleaning, or use

of an extractor hood or

fan while cooking.

• If the power socket used

to power the appliance

has poor connections,

the plug of the appliance

becomes hot. Make

sure that you plug the

appliance into a properly

connected power socket.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface.

• Leave at least 20cm free

space behind and on both

sides of the appliance

and leave at least 30cm

free space above the

appliance.

• Do not place anything

on top of the appliance

and do not sit on the

appliance.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all lters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips lters specially

intended for this

appliance. Do not use any

other lters.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move

the appliance by both

handles at the sides of the

appliance.

4 EN

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

appliance.

• Do not use this appliance

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

replaces.

• Always unplug the

appliance after use

and before lling water,

cleaning, or carrying out

other maintenance.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance

at least 2m away from

electrical appliances that

use airborne radio waves

such as TVs, radios, and

radio-controlled clocks.

• When the appliance is

not used for a long time,

bacteria may grow on the

lters. Check the lters

after a long period of

disuse. If the lters are

very dirty, replace them

(see the chapter "Replace

the lters").

• The appliance is only

intended for household

use under normal

operating conditions.

• Do not use the appliance

in wet surroundings or in

surroundings with high

ambient temperatures,

such as the bathroom,

toilet, or kitchen.

• The appliance does

not remove carbon

monoxide (CO) or

radon (Rn). It cannot be

used a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• Clean the water tank

every day to keep it clean.

5EN

English

• Only ll the water tank

with cold tap water. Do

not use ground water or

hot water.

• Do not put any substance

other than water in the

water tank. Do not put

fragrance in the water

tank.

• If you do not use the

humidication function

for a long time, clean

the water tank and

NanoCloud rotary

humidication wick tray,

and air dry the NanoCloud

rotary humidication wick.

• If you need to move the

appliance, disconnect

the appliance from the

power supply rst. Then

empty the water tank

and water tray. Carry the

appliance horizontally by

the handles on both sides

of the appliance.

2 You Air Washer

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.Philips.com/welcome.

The Philips Air Washer brings fresh,

humidied air to your house for the

health of your family. It oers you

advanced evaporation system with

NanoCloud technology, using a special

humidication lter which adds H2O

molecules to the dry air, and produces

healthy humid air without formation

of water mist. Its humidication lter

retains bacteria, calcium and other

particles from the water. It delivers only

pure humidied air in your home. No

more dry air in the winter season or

from the air conditioning.

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Product overview (g. a)

A Control panel

B Water tank

C Wick support

D Water tray

E

NanoCloud rotary humidication

wick (FY5156)

F Wick wheel

G Back panel

H Pre-lter

I NanoProtect lter (FY1114)

J Air outlet

6 EN

Controls Overview

(g. b)

K

Air humidity light ring

(HU5931 only)

L Child lock button

M Timer button

N Fan speed button

O On/o button

P Humidity level button

Q Temperature button

R Light on/o button

S Display Screen

T Reset button

3 Get started

Installing the

NanoProtect lter

The appliance comes with the

NanoProtect lter tted inside. Remove

the packaging of the lter before using

the appliance. Remove the NanoProtect

lter, unpack it, and place it back into

the appliance described as follows:

Note

• Make sure that the side with the tag

is pointing towards you.

• The pre-lter is tted inside of the

back panel.

1 Pull the top part of the back panel

towards you to release it from the

appliance (g. c).

2 Remove the NanoProtect lter from

the appliance (g. d).

3 Remove all packaging materials of

the NanoProtect lter (g. e).

4 Place the NanoProtect lter back

into the appliance (g. f).

5 To reattach the back panel, mount

the panel onto the bottom of the

appliance rst, and then push

the top of the panel against the

appliance (g. g).

7EN

English

Preparing for

humidication

1 Pull out the water tank (g. h).

2 Pull out the water tray (g. i).

3 Remove all packaging material

of the NanoCloud rotary

humidication wick (g. j).

Note

• The humidication wick has been

assembled on the wick wheel upon

purchase.

4 Place the wick wheel on the wick

support (g. k).

Note

• When placing the wick wheel on the

wick support, make sure that the

projections on the wick wheel falls

into the corresponding grooves.

5 Place the water tray back into the

appliance (g. l).

6 Turn the top cap of the water

tank anti-clockwise to unscrew it

(g. m).

7 Fill the water tank with cold tap

water (g. n).

8 Turn the top cap clockwise to tightly

lock it onto the water tank (g. o).

9 Place the water tank back into the

appliance (g. p).

4 Use the

appliance

Switching on and o

1 Put the plug in the power socket.

» The appliance sounds. For

HU5931, all lights go on once and

then go out again.

2 Touch to switch on the

appliance (g. q).

» The appliance operates under the

auto fan speed by default, and the

default humidity setting is “ ”.

» The current humidity level will

display on the screen.

3 Touch and hold for 3 seconds

to switch o the appliance (g. r

& s).

Note

• After the appliance is switched

o by the on/o button , if the

plug is still in the power socket, the

appliance will operate under the

previous settings when it is switched

on again.

Tip

• Touch the light on/o button to

turn on or o the indicator lights

and display screen.

• Touch the temperature button

once and the current temperature

will display on the screen for 3

seconds. After that the current

humidity level will display (g. t).

8 EN

Setting the humidity

level

1 Touch the humidity button

repeatedly to set the desired air

humidity to 40%, 50% or 60%

(g. u).

Note

• When the humidity level " " is

chosen, the humidity light ring will

be o. The appliance will keep

humidifying the room until the

ambient humidity level reaches

70%RH.

• In the auto mode, the appliance will

operate under fan speed 1 when the

target humidity level is reached. In

the manual fan speed mode, the

appliance will continue to operate

under the chosen fan speed.

• When the target humidity level is

reached, the wick wheel will stop

rotating. It will start rotating again

when the humidity drops below the

target level.

• If you want to increase the humidity

level quickly, you can select a

higher fan speed.

• For HU5931, the air humidity light

ring indicates whether the target

humidity level is reached. It lights

up blue when the humidity level is

reached and red when the ambient

humidity is below the preset setting.

Changing the fan speed

Auto ( )

In auto mode, the appliance selects

the fan speed in accordance with the

ambient air humidity.

1 Touch the fan speed button to

select auto ( ) (g. v).

Manual

1 Touch the fan speed button

repeatedly to select the desired fan

speed (1, 2, 3 or 4) (g. w).

Note

• Fan speed 4 is available for HU5931

only.

Setting the timer

With the timer, you can let the

appliance operate for a set number of

hours. When the set time has elapsed,

the appliance will automatically switch

o.

1 Touch the timer button

repeatedly to choose the number

of hours you want the appliance to

operate (g. x).

» The timer is available from 1 to

8 hours.

To deactivate the timer function, touch

the timer button repeatedly until

displays on the screen (g. y).

9EN

English

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (g. z & {).

» "L" displays on the screen and the

appliance beeps.

» For HU5931, the child lock icon

blinks 3 times.

» When the child lock is on, all the

other buttons are not responsive.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock.

Using the light on/o

function

The water level in the water tank is

visible through the water level window

on the water tank.

1 Touch the light dimming button

once, all the lights will be o.

» The and buttons are still

on.

2 Touch the light dimming button

again, all the lights will be on again.

Water level

The water level in the water tank is

visible through the water level window

on the water tank.

When there is not enough water in

the water tank, the water rell light

ashes to indicate that you have to rell

the water tank (g. |).

Note

• When there is no water in the

water tank, the wick wheel will stop

rotating. In the auto mode, the

appliance will operate under fan

speed 1. In the manual fan speed

mode, the appliance will continue

to operate under the chosen fan

speed. When the water tank is

relled with water, the wick wheel

will start rotating again.

10 EN

Cleaning the body of the

appliance

Regularly clean the inside and outside

of the appliance to prevent dust from

collecting.

1 Wipe away dust with a soft dry cloth

from the body of the appliance.

2 Clean the air outlet with a soft dry

cloth.

Cleaning the water

tank, water tray and

NanoCloud rotary

humidication wick

Note

• Cleaning the water tank, water

tray and NanoCloud rotary

humidication wick every week to

keep them hygienic.

1 Pull out the water tank (g. h).

2 Pull out the water tray (g. }).

3 Take the wick wheel o the wick

support (g. ~).

4 Rinse the water tank, water tray and

NanoCloud rotary humidication

wick under a running tap.

Note

• Do not take the NanoCloud rotary

humidication wick o the wheel

during cleaning.

• Do not scrub the NanoCloud rotary

humidication wick or place it under

direct sunlight.

• If necessary, use a mild detergent to

clean the water tank and water tray.

In this case, rinse the water tank and

water tray thoroughly.

5 Cleaning

Note

• Always unplug the appliance before

cleaning.

• Never immerse the appliance in

water or any other liquid.

• Never use abrasive, aggressive, or

ammable cleaning agents such as

bleach or alcohol to clean any part

of the appliance.

• Only the pre-lter and NanoCloud

rotary humidication wick are

washable. The NanoProtect lter

is not washable nor vacuum

cleanable.

Cleaning schedule

Frequency Cleaning method

When

necessary

Wipe the surface of the

appliance with a soft dry

cloth.

Every week

Rinse the water tank,

the water tray and

the NanoCloud rotary

humidication wick.

When the

cleaning icon

lights up

Clean the pre-lter.

Descale the NanoCloud

rotary humidication wick

with the water and white

vinegar or citric acid.

11EN

English

5 Wipe the outside of the water tank

and water tray dry.

6 Place the wick wheel on the wick

support (g. k).

Note

• When placing the wick wheel on the

wick support, make sure that the

projections on the wick wheel falls

into the corresponding grooves.

7 Place the water tray back into the

appliance (g. l).

8 Place the water tank back into the

appliance (g. p).

Cleaning the pre-lter

Filter alert light

status

Follow this

Cleaning light

goes on (g. )

Clean the pre-

lter

Note

• Only the pre-lter and NanoCloud

rotary humidication wick are

washable. The NanoProtect lter is

not washable.

1 Pull the top part of the back panel

towards you to release it from the

appliance (g. c).

2 To remove the pre-lter, press the

two clips down and pull the lter

towards you (g. €).

3 Wash the pre-lter under a running

tap. If the pre-lter is very dirty, use

a soft brush to brush away the dust

(g. ).

4 Air dry the pre-lter.

Note

• Make sure that the pre-lter is

completely dry. If it is still wet,

bacteria may multiply in it and

shorten the lifetime of the pre-lter.

5 After the pre-lter is completely dry,

place it back into the back panel

(g. ‚).

6 Touch and hold the reset button

for 3 seconds to reset the pre-lter

cleaning time (g. ƒ).

Descaling the

NanoCloud rotary

humidication wick

Filter alert light

status

Follow this

Cleaning light

goes on (g. )

Descale the

NanoCloud rotary

humidication

wick

1 Pull out the water tank (g. h).

2 Pull out the water tray (g. }).

3 Take the wick wheel o the wick

support (g. ~).

4 Soak the NanoCloud rotary

humidication wick in cleansing

agent (e.g diluted white vinegar,

Citric acid solution) for two hours.

12 EN

Note

• Please use mid or acid cleanser

• White vinegar (5% acetic acid) mix

with equal amount of water

• 4L water + 24g citric acid

• If there are white deposits

(limescale) on the lter, make

sure that the side with the white

deposits is immersed in the water.

• Do not take the NanoCloud rotary

humidication wick o the wheel

during descaling.

5 Let the NanoCloud rotary

humidication wick soak in the

solution for 2 hours (g. „).

6 Rinse the NanoCloud rotary

humidication wick under the tap to

rinse away vinegar residues. During

rinsing, turn the wick so that both

front and back are rinsed (g. …).

7 Air dry the NanoCloud rotary

humidication wick (g. †).

Note

• Do not put the NanoCloud rotary

humidication wick under direct

sunlight.

8 Touch and hold the reset button

for 3 seconds to reset the

NanoCloud rotary humidication

wick cleaning time (g. ƒ).

6 Replace the

filter and wick

Understanding the

healthy air protect lock

This appliance is equipped with the

healthy air protect lock to make sure

that the Nano protect lter and the

humidication wick are in optimal

condition when the appliance is

operating. When the Nano protect lter

and the humidication wick are almost

expired, the replacement light starts

to ash to indicate that they need to be

replaced.

If you do not replace the lter and

wick in time, the appliance will stop

operating and get locked.

Replacing the

NanoProtect lter

Note

• The NanoProtect lter is not

washable nor vacuum cleanable.

Filter alert light

status

Follow this

Filter replacement

light starts

ashing (g. ‡)

Replace the

NanoProtect lter

1 Remove the used NanoProtect lter

from the appliance (g. ˆ).

13EN

English

6 Place the new NanoCloud rotary

humidication wick in the wick

wheel, and then fasten the locks on

the wick wheel (g. ).

7 Place the wick wheel on the wick

support (g. k).

Note

• When placing the wick wheel on the

wick support, make sure that the

projections on the wick wheel falls

into the corresponding grooves.

8 Place the water tray and water tank

back into the appliance.

9 Touch and hold the reset button

for 3 seconds to reset the

NanoCloud rotary humidication

wick lifetime counter (g. ƒ).

Note

• Do not touch the pleated lter

surface, or smell the lter as it has

collected pollutants from the air.

• Wash your hands after disposing of

the used lters.

2 Remove all packaging material of

the new NanoProtect lter (g. e).

3 Place the new NanoProtect lter

into the appliance (g. f).

4 Touch and hold the reset button

for 3 seconds to reset the

NanoProtect lter lifetime counter

(g. ƒ).

Replacing the

NanoCloud rotary

humidication wick

Filter alert light

status

Follow this

Filter replacement

light starts

ashing (g. ‡)

Replace the

NanoCloud rotary

humidication

wick

1 Take the wick wheel o the wick

support (g. ~).

2 Unfasten the locks on the edge of

the wheel (g. ‰).

3 Grip the snap-t components

on the other side of the plate to

release the wick from the wheel

(g. Š).

4 Take the used NanoCloud rotary

humidication wick out (g. ‹).

5 Remove all packaging material

of the new NanoCloud rotary

humidication wick (g. Œ).

14 EN

7 Troubleshooting

This chapter summarizes the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Center in your country.

Problem Possible solution

The appliance

does not work even

though it is plugged

in.

• The lter replacement light has been ashing but you

have not replaced the NanoProtect lter, and the appliance

is now locked. In this case, replace the lter and reset the

lter lifetime counter.

• The water rell light ashes. Make sure the water tank

is properly installed and there is enough water in the water

tank.

The appliance

does not work even

though it is switched

on.

The appliance is working but the buttons are not responsive.

Check if the child lock is on.

There are some

white deposits on

the NanoCloud

rotary humidication

wick.

The white deposits are called scale and they consist of

minerals from the water. Scale on the NanoCloud rotary

humidication wick aects the humidifying performance,

however it does not harm your health. Follow the cleaning

instructions in the user manual.

No air comes out of

the air outlet.

Plug the appliance into the power supply and switch on.

The airow that

comes out of the air

outlet is signicantly

weaker than before.

• The pre-lter is dirty. Clean the pre-lter (see the chapter

"Cleaning").

• Make sure that you have removed all packaging material of

the NanoProtect lter.

15EN

English

Problem Possible solution

It takes a long time

to reach the target

humidity level.

NanoCloud technology evenly distributes invisible water

vapour into your room. In dry conditions moisture from the Air

Washer will be absorbed by walls, furniture, and other items in

your room. Ventilation of dry outside air will also increase the

time it takes to reach the target humidity.

I do not see water

vapor coming out of

the appliance. Is it

working?

When mist is very ne, it is invisible. The appliance has a

NanoCloud humidication technology, which produces healthy

humid air from the outlet area without formation of water mist.

Therefore, you cannot see the mist.

The appliance

produces a strange

smell.

The rst few times you use the appliance, it may produce

a plastic smell. This is normal. However, if the appliance

produces a burnt smell, contact your Philips dealer or an

authorized Philips service centre. The appliance may also

produce an unpleasant smell when one of the lters is dirty. In

this case, clean or replace the lter concerned.

The appliance is

extra loud.

• You have not removed all packaging material of the lters.

Make sure that you have removed all packaging material.

• Change the fan speed to lower fan speed level.

The appliance still

indicates that I need

to replace a lter, but

I already did.

Perhaps you did not touch and hold the reset button

correctly. Plug in the appliance, touch to switch on the

appliance, and touch and hold the reset button for

3 seconds.

16 EN

8 Guarantee and

service

If you need information or if you have a

problem, please visit the Philips website

at www.philips.com or contact the

Philips Consumer Care Center in your

country (you nd its phone number

in the worldwide guarantee leaet). If

there is no Consumer Care Centre in

your country, go to your local Philips

dealer.

Order parts or

accessories

If you have to replace a part or want to

purchase an additional part, go to your

Philips dealer or visit www.philips.com/

support.

If you have problems obtaining the

parts, please contact the Philips

Consumer Care Center in your country

(you can nd its phone number in the

worldwide guarantee leaet).

9 Notices

Electromagnetic elds

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

elds.

Compliance with EMF

Koninklijke Philips N.V. manufactures

and sells many products targeted at

consumers, which, like any electronic

apparatus, in general have the ability

to emit and receive electromagnetic

signals.

One of Philips' leading Business

Principles is to take all necessary health

and safety measures for our products,

to comply with all applicable legal

requirements and to stay well within the

EMF standards applicable at the time of

producing the products.

Philips is committed to develop,

produce and market products that

cause no adverse health eects. Philips

conrms that if its products are handled

properly for their intended use, they

are safe to use according to scientic

evidence available today.

Philips plays an active role in the

development of international EMF

and safety standards, enabling Philips

to anticipate further developments in

standardization for early integration in

its products.

17EN

English

Recycling

This symbol means that this product

shall not be disposed of with normal

household waste (2012/19/EU).

Follow your country’s rules for the

separate collection of electrical and

electronic products. Correct disposal

helps prevent negative consequences

for the environment and human health.

18

DE

Inhalt

1 Wichtige Hinweise 19

Sicherheit 19

2 Ihr Luftwäscher 23

Produktübersicht (Abb. a) 24

Übersicht über die

Bedienelemente (Abb. b) 24

3 Erste Schritte 24

Einsetzen des NanoProtect-

Filters 24

Vorbereitungen zur

Luftbefeuchtung 25

4 Verwendung des Geräts 25

Ein- und Ausschalten 25

Einstellen der

Luftfeuchtigkeit 26

Ändern der

Lüftergeschwindigkeit 27

Den Timer einstellen 27

Einstellen der

Kindersicherung 27

Nutzen der Funktion «Licht

an/aus» 27

Wasserstand 28

5 Reinigen 28

Reinigungszeitplan 28

Reinigen des Gehäuses 29

Spülen von Wasserbehälter,

Wasserauangschale und

rotierendem NanoCloud-

Befeuchtungselement 29

Reinigen des Vorlters 30

Entkalken des

rotierenden NanoCloud-

Befeuchtungselements 30

6 Auswechseln der Filter 31

Informationen zur

Verriegelungsfunktion 31

Auswechseln des

NanoProtect-Filters 31

Auswechseln des

rotierenden NanoCloud-

Befeuchtungselements 32

7 Fehlerbehebung 33

8 Garantie und Kundendienst 35

Bestellen von Ersatz- oder

Zubehörteilen 35

9 Hinweise 35

Elektromagnetische Felder 35

Recycling 36

La pagina si sta caricando...

Philips HU5930/10 Manuale utente

Questo manuale è adatto anche per

Philips HU5930/10 Manuale utente

in altre lingue

Documenti correlati

Altri documenti