Ubiquiti UniFi Guida Rapida

802.11ac Dual-Radio AP

with Public Address System

Model: UAP-AC-EDU

Introduction

Thank you for purchasing the Ubiquiti Networks®

UniFi®802.11ac Dual-Radio AP with Public Address System.

This Quick Start Guide is designed to guide you through

installation and also includes warranty terms.

IMPORTANT: The UAP-AC-EDU requires the UniFi Controller

v

4.9.5

or higher, available at: downloads.ubnt.com/unifi

Package Contents

UniFi AP AC EDU Mounting Template Gigabit PoE* (48V, 0.5A)

with Mounting Bracket

802.11ac Dual-Radio AP

with Public Address System

Model: UAP-AC-EDU

Power Cord* Quick Start Guide

* Included only in the single-pack of the UAP-AC-EDU.

Installation Requirements

• CAT5/6 cable

• Phillips screwdriver

• Drywall or keyhole saw (to cut the hole in the ceiling tile)

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s

responsibility to follow local country regulations, including operation within legal frequency

channels, output power, indoor cabling requirements, and Dynamic Frequency Selection

(DFS) requirements.

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or above recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v4.9.5 or newer (available at:

downloads.ubnt.com/unifi)

Network Topology Requirements

• A DHCP-enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v4.9.5 (or newer) software, located either on-site

and connected to the same Layer-2 network, or off-site in

the cloud or NOC

• For public address system capability: A compatible Android

™

or iOS device located on the same Layer-2 network as the

UniFi Controller and UniFi APs

US-16-150W

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-EDU UAP-AC-EDU

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

UAP-AC Outdoor

Remote Access to

UniFi Controller

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, see the User Guide on the website:

documentation.ubnt.com/unifi

Hardware Overview

The UniFi AP AC EDU is comprised of the Speaker Assembly

and UniFi AP.

USB Cable

Speaker

Assembly

UniFi AP

Ethernet Cable

Safety

Wire

Back of the Speaker Assembly

Main Port

Clamp Bracket

Main This Gigabit Ethernet port is used to connect the power

and should be connected to the LAN and DHCP server.

Clamp Bracket The four Clamp Brackets are used to secure the

UniFi AP AC EDU to the ceiling tile.

UniFi AP Ports

Main

Port

Secondary

Port

USB

Port

Reset

Button

Cable Feed

Opening

Secondary Reserved for future use.

Reset The Reset button serves two functions for the UniFi AP:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

Note: You must remove the UniFi AP from the Speaker

Assembly before you can access the Resetbutton.

Alternatively, the UniFi AP may be reset remotely via a Reset

button located on the bottom of the Gigabit PoE adapter.

Cable Feed Opening The USB and Ethernet cables feed

through this opening.

USB The USB 2.0 port is used to support the Speaker Assembly.

Main This Gigabit Ethernet port is used to carry power

anddata.

LED and Microphone

Microphone

(reserved for

future use)

Color State Status

White

Steady

Factory default, waiting for

integration.

Flashing

Initializing.

White/

Blue

Alternating

Device is busy; do not touch or

unplug it. This usually indicates

that a process such as a firmware

upgrade is taking place.

Blue

Steady

Indicates the device has been

successfully integrated into a

network and is working properly.

Quickly

Flashing

This is used to locate an AP.

When you click Locate in the UniFi

Controller software, the LED on the

AP will flash. It will also display the

location of the AP on the map.

Steady with

occasional

flashing

Indicates the device is in an isolated

state (all WLANs are brought down

until an uplink is found).

Hardware Installation

1. Remove the ceiling tile.

2. Remove the backing from the Mounting Template and place

it in the center of the ceiling tile.

242 mm

3. Cut or drill a hole around the template.

4. Rotate the UniFiAP counterclockwise to release it from the

Speaker Assembly.

5. Feed an Ethernet cable through the hole and connect it to

the Main port of the Speaker Assembly.

6. If necessary, lift and rotate the Clamp Brackets so they

remain elevated and tucked against the Speaker Assembly.

Insert the Speaker Assembly into the hole.

7. We strongly recommend that you attach the Safety Wire

(length: 430 mm) to a secure structural point using its clasp

(inside diameter: 14 mm). Do NOT attach the Safety Wire to

a T-bar in the ceiling grid.

Note: It is the installer’s responsibility to verify that

installation complies with local construction and

safety codes.

Two examples are shown below.

8. Tighten the four screws attached to the Clamp Brackets to

secure the Speaker Assembly to the ceiling tile.

9. To connect the cables:

a. Feed the cables of the Speaker Assembly through its

cable slot and the Cable Feed Opening of the UniFi AP.

b. Connect the Ethernet cable to the Main port, and

connect the USB cable to the USB port.

10. Insert the UniFi AP into the Speaker Assembly. Then align

the notch on the top edge of the UniFi AP with the notch

on the Speaker Assembly.

11. Ensure that the UniFi AP is firmly seated on the Speaker

Assembly. Turn the UniFi AP clockwise until it locks

intoplace.

12. Set the ceiling tile back into place.

Powering the UniFi AP

The UniFi AP AC EDU features auto-sensing 802.3at PoE+

support and can be powered by any of the following:

• Ubiquiti Networks UniFi Switch (recommended and sold

separately)

• 802.3at PoE+ compliant switch

• Ubiquiti Networks Gigabit PoE Adapter* (48V, 0.5A)

* Included only in the single-pack of the UAP-AC-EDU.

Connecting to a PoE+ Switch

Connect the Ethernet cable from the UniFi AP AC EDU directly

to a PoE port on the switch.

1 3 5 7 9 11 13 15 17 19 21 22

2 4 6 8 10 12 14 16 18 20 22 24

SFP1

SFP2

UniFi Switch Power Connection Diagram

Connecting to a PoE Adapter

Note: The Gigabit PoE adapter is included only in the

single-pack of the UAP-AC-EDU.

1. Connect the Ethernet cable from the UniFi AP AC EDU to

the POE port of the Gigabit PoE adapter.

2. Connect an Ethernet cable from your LAN to the LAN port

of the Gigabit PoE adapter.

3. Connect the Power Cord to the adapter, and then plug the

Power Cord to a power outlet.

Mounting the PoE Adapter (Optional)

1. Remove the PoE Mounting Bracket from the adapter, place

the bracket at the desired location, and mark the two holes.

2. Pre-drill the holes if necessary, and secure the bracket

using two fasteners (not included).

3. Align the slots of the adapter with the tabs of the PoE

Mounting Bracket, and then slide the adapterdown.

Controller Software Installation

Download and install the latest version of the UniFi Controller

software at: downloads.ubnt.com/unifi

Launch the software and follow the on-screen instructions.

Step-by-step instructions are available in the User Guide

located on our website: documentation.ubnt.com/unifi

After you have installed the software and run the UniFi

Installation Wizard, a login screen will appear for the UniFi

Controller management interface. Enter the Username and

Password that you created and click Login.

You can manage your wireless network and view network

statistics using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller

software, refer to the User Guide available at:

documentation.ubnt.com/unifi

*640-00226-06*

640-00226-06

UniFi EDU App

Ubiquiti Networks offers the UniFi EDU app so you

can broadcast announcements with clarity from your

mobiledevice.

The UniFi EDU app includes five tabs:

• Broadcast Create broadcast groups and make an

immediate announcement.

• Schedule Schedule announcements.

• Recordings Create recordings for later use.

• Volume Adjust the volume for each UniFi AP AC EDU.

• Settings Switch to a different site.

Note: For details, refer to the User Guide, which is

available at: documentation.ubnt.com/unifi

Requirements

• UniFi Controller software v4.9.5 or higher

• UniFi AP AC EDU firmware version 3.4.18 or higher

• A compatible Android or iOS device located on the same

Layer-2 network as the UniFi Controller and UniFi APs

The following instructions describe the iOS version of the app;

however, the Android version is similar.

To log in and make an immediate announcement:

1. Download the UniFi EDU app from the AppStore (iOS) or

Google Play

™

(Android).

2. Launch the app.

3. Enter the following information:

• (IP address) Enter the IP address of the UniFi Controller.

Note: If you do not know the IP address, you can click

Find to detect a UniFi Controller and then select it.

• (port) Enter the appropriate port number, which is

typically 8443.

• (username) Enter your username for the UniFi

Controller.

• (password) Enter your password for the UniFi

Controller.

• Remember username and password Tap this option if

you want the app to remember your login.

Tap Connect.

4. To create a broadcast group, tap .

5. Enter a descriptive name in the Group Name field.

6. Tap the appropriate UniFi AC EDU APs and then tap Save.

7. Tap the broadcast group you want to use.

8. Tap Start broadcast to start the announcement.

9. Tap Stop broadcast to end the announcement.

The speakers will automatically be muted when you stop

broadcasting.

Specifications

UAP-AC-EDU

Dimensions 287.5 x 287.5 x 125.9 mm

(11.32 x 11.32 x 4.96")

Weight 1.820 kg (4.012 lb)

Networking Interface (2) 10/100/1000 Ethernet Ports

Port (1) USB Port

Buttons Reset

Power Method 803.2at PoE+

Power Supply 48V, 0.5A PoE Gigabit Adapter

1

Supported Voltage Range 44VDC to 57VDC

Max. Power Consumption 20W

Max. TX Power

2.4 GHz

5 GHz

22 dBm

MIMO

2.4 GHz

5 GHz

3 x 3

Throughput Speeds

2

2.4 GHz

5 GHz

450 Mbps

1300 Mbps

Range

2

122 m (400 ft)

Antennas (3) Dual-Band Internal

Antenna Gain 2.4 GHz: 3 dBi, 5 GHz: 3 dBi

Wi-Fi Standards 802.11 a/b/g/n/ac

Wireless Security WEP, WPA-PSK,

WPA Enterprise (WPA/WPA2, TKIP/AES)

BSSID Up to Four per Radio

Mounting Wall/Ceiling (Kits Included)

Operating Temperature -10 to 70° C (14 to 158° F)

Operating Humidity 5 - 95% Noncondensing

Certications CE, FCC, IC

1 Only the single-pack of the UAP-AC-EDU includes a PoE adapter.

2 Speed and Range values may vary and are based on optimal

environments.

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the

product(s) furnished hereunder (the “Product(s)”) shall be free from defects

in material and workmanship for a period of one (1) year from the date

of shipment by UBIQUITI NETWORKS under normal use and operation.

UBIQUITI NETWORKS’ sole and exclusive obligation and liability under

the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion,

to repair or replace any Product that fails to conform to the above

warranty during the above warranty period. The expense of removal and

reinstallation of any Product is not included in this warranty. The warranty

period of any repaired or replaced Product shall not extend beyond its

original term.

Warranty Conditions

The above warranty does not apply if the Product:

(I) has been modified and/or altered, or an addition made thereto,

except by Ubiquiti Networks, or Ubiquiti Networks’ authorized

representatives, or as approved by Ubiquiti Networks in writing;

(II) has been painted, rebranded or physically modified in any way;

(III) has been damaged due to errors or defects in cabling;

(IV) has been subjected to misuse, abuse, negligence, abnormal

physical, electromagnetic or electrical stress, including lightning

strikes, or accident;

(V) has been damaged or impaired as a result of using third party

firmware;

(VI) has no original Ubiquiti MAC label, or is missing any other original

Ubiquiti label(s); or

(VII) has not been received by Ubiquiti within 30 days of issuance of

the RMA.

In addition, the above warranty shall apply only if: the product has been

properly installed and used at all times in accordance, and in all material

respects, with the applicable Product documentation; all Ethernet cabling

runs use CAT5 (or above), and for outdoor installations, shielded Ethernet

cabling is used, and for indoor installations, indoor cabling requirements

are followed.

Returns

No Products will be accepted for replacement or repair without obtaining

a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS

during the warranty period, and the Products being received at UBIQUITI

NETWORKS’ facility freight prepaid in accordance with the RMA process of

UBIQUITI NETWORKS. Products returned without an RMA number will not

be processed and will be returned freight collect or subject to disposal.

Information on the RMA process and obtaining an RMA number can be

found at: www.ubnt.com/support/warranty.

La pagina sta caricando ...

Ubiquiti UniFi Guida Rapida

Ubiquiti UniFi Guida Rapida

in altre lingue

Documenti correlati

Altri documenti