ASROCK AOD790GX-128M Manuale del proprietario

11

1

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Published August 2008

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

22

2

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

Motherboard LayoutMotherboard Layout

Motherboard Layout

1 eSATAII Connector (eSATAII_TOP, Orange) 21 Chassis Fan Connector (CHA_FAN1)

2 PS2_USB_PW1 Jumper 22 USB 2.0 Header (USB6_7, Blue)

3 ATX 12V Power Connector (ATX12V1) 23 USB 2.0 Header (USB8_9, Blue)

4 CPU Fan Connector (CPU_FAN1) 24 SPI Flash Memory (8Mb)

5 CPU Heatsink Retention Module 25 Infrared Module Header (IR1)

6 AM2 940-Pin CPU Socket 26 Front Panel IEEE 1394 Header

7 2 x 240-pin DDR2 DIMM Slots (FRONT_1394, Red)

(Dual Channel A: DDRII_1, DDRII_2; Yellow) 27 Floppy Connector (FLOPPY1)

8 2 x 240-pin DDR2 DIMM Slots 28 Serial Port Connector (COM1)

(Dual Channel B: DDRII_3, DDRII_4; Orange) 29 USB/WiFi Header (USB/WIFI, Yellow)

9 ATX Power Connector (ATXPWR1) 29 Internal Audio Connector: CD1 (Black)

10 Primary IDE Connector (IDE1, Blue) 30 Front Panel Audio Header

11 Southbridge Controller (HD_AUDIO1, Lime)

12 Clear CMOS Jumper (CLRCMOS1) 31 Internal Audio Connector: CD1 (Black)

13 Chassis Speaker Header 32 HDMI_SPDIF Header

(SPEAKER 1, Purple) (HDMI_SPDIF1, Yellow)

14 System Panel Header (PANEL1, Orange) 33 PCI Slots (PCI1- 3)

15 Sixth SATAII Connector (SATAII_6, Orange) 34 PCI Express 2.0 x16 Slot (PCIE3; Blue)

16 Fourth SATAII Connector (SATAII_4, Red) 35 SLI/XFire Switch Card Retention Slot

17 Fifth SATAII Connector (SATAII_5, Red) 36 PCI Express 2.0 x16 Slot (PCIE2; Green)

18 Third SATAII Connector (SATAII_3, Red) 37 PCI Express 2.0 x1 Slot (PCIE1; Green)

19 Primary SATAII Connector (SATAII_1, Red) 38 Northbridge Controller

20 Secondary SATAII Connector (SATAII_2, Red) 39 SLI / XFIRE Power Connector

33

3

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

I/O PI/O P

I/O P

anelanel

anel

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA

Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek

HDA Audio 2nd output” to use front panel audio.

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output ChannelsFront Speaker Rear Speaker Central / Bass Side Speaker

(No. 10) (No. 7) (No. 8) (No. 6)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

1 PS/2 Mouse Port (Green) 9 Line In (Light Blue)

2 VGA/D-Sub Port ** 10 Front Speaker (Lime)

3 USB 2.0 Ports (USB45) 11 Microphone (Pink)

4 IEEE 1394 Port 12 USB 2.0 Ports (USB01)

* 5 LAN RJ-45 Port 13 USB 2.0 Ports (USB23)

6 Side Speaker (Gray) 14 eSATAII Port

7 Rear Speaker (Black) 15 VGA/DVI-D Port

8 Central / Bass (Orange) 16 PS/2 Keyboard Port (Purple)

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No link Off 10Mbps connection

Yellow Linked Orange 100Mbps connection

Blinking Data Activity Green 1Gbps connection

44

4

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

Free Bundle

ASRock provides you with one DVI-to-HDMI converter,

which is used to transfer HDMI signals to HDMI devices

through DVI-D port. After connecting the DVI-to-HDMI

converter to the DVI-D port on the I/O panel, your

motherboard will be able to support HDMI signal.

55

5

ASRock AOD790GX/128M Motherboard

1.1.

1.

IntroductionIntroduction

Introduction

Thank you for purchasing ASRock AOD790GX/128M motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step

guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to

BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.11.1

1.1

PP

P

ackack

ack

age Contentsage Contents

age Contents

1 x ASRock AOD790GX/128M Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

1 x ASRock AOD790GX/128M Quick Installation Guide

2 x ASRock AOD790GX/128M Support CD

1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)

1 x 3.5-in Floppy Drive Ribbon Cable

4 x Serial ATA (SATA) Data Cables (Optional)

1 x Serial ATA (SATA) HDD Power Cable (Optional)

1 x ASRock SLI/XFire Switch Card

1 x DVI-to-HDMI Converter

1 x I/O Panel Shield

I converter,

HDMI devices

-to-HDMI

your

signal.

EnglishEnglish

English

66

6

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- All Solid Capacitor design (100% Japan-made high-quality

Conductive Polymer Capacitors)

CPU - Support for Socket AM2+ / AM2 processors: AMD Phenom

TM

FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon

X2 Dual-Core / Athlon 64 / Sempron

processor

- Supports CPU up to 140W

- Supports AMD OverDrive

TM

with ACC feature

(Advanced Clock Calibration)

- AMD LIVE!

TM

Ready

- Supports AMD’s Cool ‘n’ Quiet

TM

Technology

- FSB 2600 MHz (5.2 GT/s)

- Supports Untied Overclocking Technology (see CAUTION 1)

- Supports Hyper-Transport 3.0 (HT 3.0) Technology

Chipset - Northbridge: AMD 790GX

- Southbridge: AMD SB750

Memory - Dual Channel DDR2 Memory Technology (see CAUTION 2)

- 4 x DDR2 DIMM slots

- Support DDR2 1066/800/667/533 non-ECC, un-buffered memory

(see CAUTION 3)

- Max. capacity of system memory: 8GB (see CAUTION 4)

Expansion Slot - 2 x PCI Express 2.0 x16 slots

(green @ x16 mode, blue @ x8 mode)

- 1 x PCI Express 2.0 x1 slot

- 3 x PCI slots

- Supports ATI

TM

CrossFire

TM

and Hybrid CrossFireX

TM

(see CAUTION 5)

Graphics - Integrated AMD Radeon HD 3300 graphics

- DX10 class iGPU, Pixel Shader 4.0

- Max. shared memory 512MB (see CAUTION 6)

- Integrated 128MB side port memory for iGPU

- Three VGA Output options: D-Sub, DVI-D and HDMI with

DVI-to-HDMI converter (see CAUTION 7)

- Supports HDCP function

- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

(see CAUTION 8)

Audio - 7.1 CH Windows

®

Vista

TM

Premium Level HD Audio with

Content Protection

- DAC with 110dB dynamic range (ALC890 Audio Codec)

77

7

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111C-VCO-GR

- Supports Wake-On-LAN

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x VGA/D-Sub Port

- 1 x VGA/DVI-D Port

- 6 x Ready-to-Use USB 2.0 Ports

- 1 x eSATAII Port

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- 1 x IEEE 1394 Port

- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/

Line in/Front Speaker/Microphone (see CAUTION 9)

Connector - 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 5, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”

functions (see CAUTION 10)

- 1 x eSATAII 3.0Gb/s connector (shared with 1 SATAII

connector) (see CAUTION 11)

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x IR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header

- CPU/Chassis FAN connector

- 24 pin ATX power connector

- 8 pin 12V power connector

- SLI/XFIRE power connector

- CD in header

- Front panel audio connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

(see CAUTION 12)

- 1 x USB/WiFi header (see CAUTION 13)

BIOS Feature - 8Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- CPU, DRAM, NB Voltage Multi-adjustment

- Supports Smart BIOS

88

8

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

WARNING

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

the third-party overclocking tools. Overclocking may affect your system stability, or

even cause damage to the components and devices of your system. It should be

done at your own risk and expense. We are not responsible for possible damage

caused by overclocking.

CAUTION!

1. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 35 for details.

2. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 15 for proper

installation.

3. Whether 1066MHz memory speed is supported depends on the AM2+

CPU you adopt. If you want to adopt DDR2 1066 memory module on this

motherboard, please refer to the memory support list on our website for

the compatible memory modules.

ASRock website http://www.asrock.com

4. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

®

XP

and Windows

®

Vista

TM

. For Windows

®

XP 64-bit and Windows

®

Vista

TM

64-bit with 64-bit CPU, there is no such limitation.

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version),

AMD OverDrive

TM

Utility

Unique Feature - ASRock OC Tuner (see CAUTION 14)

- Intelligent Energy Saver (see CAUTION 15)

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 16)

- ASRock U-COP (see CAUTION 17)

- Boot Failure Guard (B.F.G.)

- ASRock AM2 Boost: ASRock Patented Technology to boost

memory performance up to 12.5% (see CAUTION 18)

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

OS - Microsoft

®

Windows

®

XP / XP Media Center / XP 64-bit /

Vista

TM

/ Vista

TM

64-bit compliant

Certifications - FCC, CE, Microsoft

®

WHQL Certificated

* For detailed product information, please visit our website: http://www.asrock.com

99

9

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

5. This motherboard supports ATI

TM

CrossFire

TM

and Hybrid CrossFire

TM

technology. If you want to use CrossFire

TM

function, please follow the in-

structions on page 20 and 21 to reverse the direction of ASRock SLI/XFire

Switch Card in advance.

6. The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check AMD website for the latest

information.

7. There are three VGA output options on this motherboard: D-Sub, DVI-D

and HDMI. D-Sub and DVI-D ports are on the I/O panel. HDMI interface is

supported when you install the bundled DVI-to-HDMI converter to the

DVI-D port on the I/O panel.

8. 1080p Blu-ray (BD) / HD-DVD playback support on this motherboard re-

quires the proper hardware configuration. Please refer to page11 and 12

for the minimum hardware requirement and the passed 1080p Blu-ray

(BD) / HD-DVD films in our lab test.

9. For microphone input, this motherboard supports both stereo and mono

modes. For audio output, this motherboard supports 2-channel, 4-channel,

6-channel, and 8-channel modes. Please check the table on page 3 for

proper connection.

10. Before installing SATAII hard disk to SATAII connector, please read the “SATAII

Hard Disk Setup Guide” on page 44 of “User Manual” in the support CD to

adjust your SATAII hard disk drive to SATAII mode. You can also connect

SATA hard disk to SATAII connector directly.

11. This motherboard supports eSATAII interface, the external SATAII

specification. Please read “eSATAII Interface Introduction” on page 32

for details about eSATAII and eSATAII installation procedures.

12. Power Management for USB 2.0 works fine under Microsoft

®

Windows

®

Vista

TM

64-bit / Vista

TM

/ XP 64-bit / XP SP1 or SP2.

13. USB/WiFi header can be used to support 2 USB 2.0 ports. It can also be

used to support WiFi+AP function with ASRock WiFi-802.11g or WiFi-

802.11n module, an easy-to-use wireless local area network (WLAN)

adapter. It allows you to create a wireless environment and enjoy the

convenience of wireless network connectivity. Please visit our website

for the availability of ASRock WiFi-802.11g or WiFi-802.11n

module. ASRock website http://www.asrock.com

14. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

®

environment. Please visit our website for the operation procedures of

ASRock OC Tuner. ASRock website: http://www.asrock.com

15. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. The voltage regulator can reduce the

number of output phases to improve efficiency when the CPU cores are

idle. In other words, it is able to provide exceptional power saving and

improve power efficiency without sacrificing computing performance.

1010

10

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

To use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet

option in the BIOS setup in advance. Please visit our website for the

operation procedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

16. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

17. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

18. This motherboard supports ASRock AM2 Boost overclocking technology. If

you enable this function in the BIOS setup, the memory performance will

improve up to 12.5%, but the effect still depends on the AM2 CPU you

adopt. Enabling this function will overclock the chipset/CPU reference clock.

However, we can not guarantee the system stability for all CPU/DRAM

configurations. If your system is unstable after AM2 Boost function is enabled,

it may not be applicative to your system. You may choose to disable this

function for keeping the stability of your system.

1111

11

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

1.31.3

1.3

Minimum Hardware Requirement for 1080p Blu-rayMinimum Hardware Requirement for 1080p Blu-ray

Minimum Hardware Requirement for 1080p Blu-ray

(BD) / HD(BD) / HD

(BD) / HD

-D-D

-D

VD Playback SupporVD Playback Suppor

VD Playback Suppor

tt

t

1080p Blu-ray (BD) / HD-DVD playback support on this motherboard

requires the proper hardware configuration. Please refer to below table

for the minimum hardware requirement.

CPU AMD Athlon X2 3600

VGA Onboard VGA with DVI-D port

Memory Dual Channel DDR2 533, 1GB x 2

Suggested OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

* If you need to use CyberLink PowerDVD Ultra version 7.3, we suggest to disable

Hardware Acceleration function for better playback performance and compatibility.

After executing CyberLink PowerDVD Ultra program, please follow below steps to

disable Hardware Acceleration function.

A. Right-click the main page of CyberLink PowerDVD Ultra program.

B. Click “Configuration”.

C. Select “Video”.

D. Click “Enable hardware acceleration (ATI Avivo)” to remove the “V” mark in

this item.

E. Click “OK” to save the change.

* Currently, 1080p Blu-ray (BD) / HD-DVD playback is only supported under Windows

®

Vista

TM

/ Vista

TM

64-bit OS. If you install Windows

®

XP / XP 64-bit OS, the function of

1080p Blu-ray (BD) / HD-DVD playback is not available, please visit our website for

AMD 780G VGA driver update in the future.

ASRock website http://www.asrock.com

1212

12

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

1.41.4

1.4

PP

P

assed 1080p Blu-ray (BD) / HDassed 1080p Blu-ray (BD) / HD

assed 1080p Blu-ray (BD) / HD

-D-D

-D

VD FVD F

VD F

ilms in Our Lilms in Our L

ilms in Our L

abab

ab

TT

T

estest

est

DVD Film Name Format Producer

Type

Blu-ray SWORDFISH VC-1 WB

DVD UNDERWORLD EVOLUTION MPEG-2 SONY

THE LAST STAND MPEG-4-AVC FOX

SPEED MPEG-4-AVC FOX

CASINO ROYALE MPEG-4-AVC SONY

THE LEAGUE OF MPEG-4-AVC FOX

EXTRAORDINARY GENTLEMEN

HD- KING KONG VC-1 UNIVERSAL

DVD NEW ORLEANS CONCERT MPEG-2 WEA

ONE SIX RIGHT MPEG-2 TERWILLIGER

THE INTERPRETER MPEG-4-AVC UNIVERSAL

* MPEG-4-AVC mentioned above refers to the same format of H.264.

* Above passed films are tested under below configuration.

Items Configurations

CPU AMD Athlon X2 3600

VGA Onboard VGA with DVI-D port

Memory Dual Channel DDR2 533, 1GB x 2

OS Windows

®

Vista

TM

or Windows

®

Vista

TM

64

Playback Software CyberLink PowerDVD Ultra (Version 3730 or above)

DVD Player Pioneer BDR-101A / LG GBW-H10N (BD)

HP HD100 (HD-DVD)

1313

13

ASRock AOD790GX/128M Motherboard

2.2.

2.

InstallationInstallation

Installation

This is an ATX form factor (12.0-in x 9.6-in, 30.5 cm x 24.4 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to en-

sure that the motherboard fits into it.

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet or

the like. Also remember to use a grounded wrist strap or touch a

safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard

to the chassis, please do not over-tighten the screws! Doing so may

damage the motherboard.

EnglishEnglish

English

1414

14

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90

o

angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with

the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU

into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat

dissipation. Make sure that the CPU and the heatsink are securely fas-

tened and in good contact with each other. Then connect the CPU fan to

the CPU FAN connector (CPU_FAN1, see Page 2, No. 4). For proper

installation, please kindly refer to the instruction manuals of the CPU fan

and the heatsink.

STEP 1:

Lift Up The Socket Lever

STEP 2 / STEP 3:

Match The CPU Golden Triangle

To The Socket Corner Small

Triangle

STEP 4:

Push Down And Lock

The Socket Lever

Lever 90° Up

CPU Golden Triangle

Socker Corner Small Triangle

1515

15

ASRock AOD790GX/128M Motherboard

2.3 Installation of Memory Modules (DIMM)2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR2 (Double Data Rate 2) DIMM slots,

and supports Dual Channel Memory Technology. For dual channel configuration,

you always need to install identical (the same brand, speed, size and chip-

type) DDR2 DIMM pair in the slots of the same color. In other words, you have to

install identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2;

Yellow slots; see p.2 No.7) or identical DDR2 DIMM pair in Dual Channel B

(DDRII_3 and DDRII_4; Orange slots; see p.2 No.8), so that Dual Channel Memory

Technology can be activated. This motherboard also allows you to install four

DDR2 DIMMs for dual channel configuration, and please install identical DDR2

DIMMs in all four slots. You may refer to the Dual Channel Memory Configuration

Table below.

Dual Channel Memory Configurations

DDRII_1 DDRII_2 DDRII_3 DDRII_4

(Yellow Slot) (Yellow Slot) (Orange Slot) (Orange Slot)

(1) Populated Populated - -

(2) - - Populated Populated

(3)* Populated Populated Populated Populated

* For the configuration (3), please install identical DDR2 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of yellow

slots (DDRII_1 and DDRII_2), or in the set of orange slots (DDRII_3

and DDRII_4).

2. If only one memory module or three memory modules are installed

in the DDR2 DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in DDRII_1

and DDRII_3, it is unable to activate the Dual Channel Memory

Technology .

4. It is not allowed to install a DDR memory module into DDR2 slot;

otherwise, this motherboard and DIMM may be damaged.

5. If you adopt DDR2 1066 memory modules on this motherboard, it is

recommended to install them on DDRII_3 and DDRII_4 slots.

EnglishEnglish

English

1616

16

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1717

17

ASRock AOD790GX/128M Motherboard

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 3 PCI slots and 3 PCI Express slots on this motherboard.

PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE Slots:

PCIE1 (PCIE x1 slot; Green) is used for PCI Express cards with x1 lane

width cards, such as Gigabit LAN card and SATA2 card.

PCIE2 (PCIE x16 slot; Green) is used for PCI Express x16 lane width

graphics cards, or used to install PCI Express graphics cards to

support CrossFire

TM

function.

PCIE3 (PCIE x16 slot; Blue) is used for PCI Express x1 lane width

cards, such as Gigabit LAN card, SATA2 card, etc., or used to install

PCI Express graphics cards to support CrossFire

TM

function.

PCIE2 / PCIE3 / SLI/XFire Switch Card Retention Slot

Configurations

PCIE2 Slot PCIE3 Slot SLI/XFire Switch Card

(Green) (Blue) Retention Slot

Single Graphics Card PCIE x16 PCIE x1

Dual Graphics Cards PCIE x8 PCIE x8

in CrossFire

TM

Mode

(Default)

EnglishEnglish

English

1818

18

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

2.5 CrossFire2.5 CrossFire

2.5 CrossFire

TMTM

TM

Operation Guide Operation Guide

Operation Guide

This motherboard supports CrossFire

TM

feature. CrossFire

TM

technology offers the

most advantageous means available of combining multiple high performance Graphics

Processing Units (GPU) in a single PC. Combining a range of different operating

modes with intelligent software design and an innovative interconnect mechanism,

CrossFire

TM

enables the highest possible level of performance and image quality in

any 3D application. Currently CrossFire

TM

feature is supported with Windows

®

XP

with Service Pack 2 and Vista

TM

OS. Please check AMD website for ATI

TM

CrossFire

TM

driver updates.

1. If you plan to install only one PCI Express VGA card on this

motherboard, please install it on PCIE2 slot (Green). In this mode,

you do not need to adjust the default setting of ASRock SLI/XFire

Switch Card, and please do not remove or lose ASRock SLI/XFire

Switch Card when it is still in working condition.

2. For the information of the compatible CrossFire

TM

Mode PCI

Express VGA cards and CrossFire

TM

setup procedures, please refer

to “CrossFire

TM

Operation Guide” on page 18.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

1919

19

ASRock AOD790GX/128M Motherboard

1. If a customer incorrectly configures their system they will not see the

performance benefits of CrossFire

TM

. All three CrossFire

TM

components, a

CrossFire

TM

Ready graphics card, a CrossFire

TM

Ready motherboard and a

CrossFire

TM

Edition co-processor graphics card, must be installed correctly to

benefit from the CrossFire

TM

multi-GPU platform.

2. If you pair a 12-pipe CrossFire

TM

Edition card with a 16-pipe card, both cards will

operate as 12-pipe cards while in CrossFire

TM

mode.

Enjoy the benefit of CrossFireEnjoy the benefit of CrossFire

Enjoy the benefit of CrossFire

TMTM

TM

Different CrossFire

TM

cards may require different methods to enable CrossFire

TM

feature. In below procedures, we use Radeon 2600XT as the example graphics card.

For other CrossFire

TM

cards that ATI

TM

has released or will release in the future, please

refer to ATI

TM

graphics card manuals for detailed installation guide.

What graphics cards work with CrossFire

TM

?

A complete CrossFire

TM

system requires a CrossFire

TM

Ready motherboard, a

CrossFire

TM

Edition graphics card and a compatible standard Radeon (CrossFire

TM

Ready) graphics card from the same series, or two CrossFire

TM

Ready cards. This

applies to cards from ATI

TM

or any of its partners. Please refer to below table for

CrossFire

TM

VGA card support list according to the OS you install.

For Windows

®

XP

Vendor Chipset Model Driver

ATI Radeon HD 3870 X2 POWERCOLOR AX3870X2 1GBD3-H Catalyst 8.2

Radeon HD 3870 POWERCOLOR AX3870 512MD4-H Catalyst 8.2

Radeon HD 3850 GIGABYTE GV-RX385256H-B Catalyst 8.2

Radeon HD 3650 POWERCOLOR AX3650 512MD3-XP Catalyst 8.2

Radeon HD 3450 POWERCOLOR AX3450 256MD2-S Catalyst 8.2

Radeon HD2900XT MSI RX2900XT-VT2D512E Catalyst 7.11

Radeon HD 2600XT Gigabyte GV-RX26T256HP-B Catalyst 7.9

Radeon HD 2600PRO MSI RX2600PRO-T2D256EZ Catalyst 7.9

Radeon X1950XTX GeCube RX1950XTX Catalyst 7.11

Radeon X1950PRO Gecube Radeon X1950Pro 256MB Catalyst 7.11

For Windows

®

Vista

Vendor Chipset Model Driver

ATI Radeon HD 3870 X2 POWERCOLOR AX3870X2 1GBD3-H Catalyst 8.2

Radeon HD 3870 POWERCOLOR AX3870 512MD4-H Catalyst 8.2

Radeon HD 3850 GIGABYTE GV-RX385256H-B Catalyst 8.2

Radeon HD 3650 POWERCOLOR AX3650 512MD3-XP Catalyst 8.2

Radeon HD 3450 POWERCOLOR AX3450 256MD2-S Catalyst 8.2

Radeon HD2900XT MSI RX2900XT-VT2D512E Catalyst 7.11

Radeon HD 2600XT Gigabyte GV-RX26T256HP-B Catalyst 7.9

Radeon HD 2600PRO MSI RX2600PRO-T2D256EZ Catalyst 7.9

Radeon X1950XTX GeCube RX1950XTX Catalyst 7.11

Radeon X1950PRO Gecube Radeon X1950Pro 256MB Catalyst 7.11

Radeon X1600PRO MSI RX1600PRO-TD256E Catalyst 7.3

Radeon X1300 PRO MSI RX1300PRO-TD256E Catalyst 7.3

EnglishEnglish

English

2020

20

ASRock AOD790GX/128M Motherboard

EnglishEnglish

English

Step 2. There is one ASRock SLI/XFire Switch Card factory-mounted on this

motherboard. This card served as a switch between the default mode

(x16) and CrossFire mode (x8 / x8). ASRock SLI/XFire Switch Card is

factory-mounted with its default mode (x16) side toward the retention slot

base.

Step 3. To change it to CrossFire Mode, you need to reverse the direction of

ASRock SLI/XFire Switch Card. Please simultaneously pull open both the

retention arms that hold the card in position. The card itself will spring

away from the retention slot. Take it out gently by holding its edges, and

keep away from touching the connectors (Golden Fingers).

Step 4. Reverse the card direction so as to have the “X8 / X8 MODE” wording side

toward the retention slot base. Insert the card into the bottom of the base.

It is recommended to use 500-Watt power supply or greater

to perform the benefit of CrossFire

TM

feature.

Step 1. Connect to the system power supply. Please connect a hard disk power

connector to SLI/XFIRE Power connector on this motherboard.

La pagina si sta caricando...

ASROCK AOD790GX-128M Manuale del proprietario

ASROCK AOD790GX-128M Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti