Panasonic Cordless Telephone KX-TCD650BX Manuale utente

Categoria
Telefoni
Tipo
Manuale utente

Questo manuale è adatto anche per

Safety Information . . . . . . . . . . . .2
Setting up . . . . . . . . . . . . . . . . . .2
Using the Telephone . . . . . . . . . .4
Additional Features . . . . . . . . . . .9
Handset Settings . . . . . . . . . . . .10
Base Unit Settings . . . . . . . . . . .13
Initial Settings . . . . . . . . . . . . . .16
For Optional Multi Unit Users . .17
Before Requesting Help . . . . . . .20
Index . . . . . . . . . . . . . . . . . . . . .22
Caller ID compatible
Please read before use and save
Charge the batteries for approx. 15 hours before initial use
Model No:
KX-TCD650BX
Digital
Cordless Phone
Operating Instructions
& Quick Guide
Centre Page Pullout
650bx engversion 19 6 02 19/6/02 6:58 am Page 1
Safety Information
Setting Up
Battery Caution
Use only specified batteries.
Only use rechargeable batteries.
Do not mix old and new batteries.
Do not dispose of batteries in a fire,
they may explode. Check local waste
management codes for special
disposal instructions.
Do not open or mutilate the
batteries. Released electrolyte is cor-
rosive and may cause burns or injury
to the eyes or skin. The electrolyte
may be toxic if swallowed.
Exercise care in handling the
batteries in order not to short the
batteries with conductive materials
such as rings, bracelets and keys.
The batteries and/or conductor may
overheat and cause burns.
Charge the batteries provided in
accordance with the information
given in this operating guide.
2
General Safety
Accessories (Included)
AC Adaptor 1
Telephone Line 1
Cord
Batteries 2
(AA Size)
Battery Cover 1
Operating 1
Instructions
Additional accessories are available
for purchase. Contact your
Panasonic Service Centre for fur-
ther details.
Only use the power supply included
with the product.
Do not connect the AC Adaptor to any
AC outlet other than the
standard AC230V.
The apparatus is approved for use
with PQLV19CE power supply.
This apparatus is unable to make
emergency telephone calls under the
following conditions:
The portable handset batteries
need recharging, or have failed.
During a mains power failure.
When the Key Lock is set to
ON.
When the unit is in Direct Call
mode.
Do not open the base unit or handset
(other than to change the batteries).
This apparatus should not be used
near emergency/intensive care
medical equipment and should not be
used by people with pacemakers.
Care should be taken that objects do
not fall onto, and liquids are not
spilled into the unit. Do not subject
this unit to excessive smoke, dust,
mechanical vibration or shock.
Environment
Do not use this unit near water.
This unit should be kept away from
heat sources such as radiators, cook-
ers, etc. It should also not be placed
in rooms where the
temperature is less than 5
o
C or
greater than 40
o
C.
The AC Adaptor is used as the main
disconnect device, ensure that the AC
outlet is located / installed near the
unit and is accessible.
WARNING:
TO PREVENT THE RISK OF
ELECTRICAL SHOCK, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR ANY OTHER TYPE OF
MOISTURE.
650bx engversion 19 6 02 19/6/02 6:58 am Page 2
LINE
6v
Insert the Batteries
Hook
6cm
#
$
%
&
Notice
Some features described in these
operating instructions/Quick Guide
are dependent upon subscription to
your Network provider (e.g Caller ID).
All features of this type
will be marked through-
out the manual with this
icon.
Please note throughout this operat-
ing instructions/Quick Guide that the
word “PRESS” is depicted by this
symbol Z.
3
Setting Up
Please ensure the batteries are
inserted as shown.
Connection
Plug in the AC adaptor and the tele-
phone line cord in order #, $, %.
WARNING:
DO NOT CONNECT THE TELE-
PHONE LINE CORD TO THE
PHONE SOCKET & UNTIL THE
HANDSET IS FULLY CHARGED.
Fasten the AC adaptor cord to pre-
vent it from being disconnected.
The AC Adaptor must remain con-
nected at all times. (It is normal for
the adaptor to feel warm during use).
Location
For maximum distance noise-free
operation, place your base unit:
-Away from electrical appliances such
as TV, radio, personal computer or
another phone.
-In a convenient high and central loca-
tion.
Wall Mounting
This unit can be mounted on a wall.
Insert screws into wall. The centres of
the screw holes should be 6cm
vertically apart.
Connect the AC adaptor and the tele-
phone line cord.
Arrange the wires as shown, then
mount the unit.
650bx engversion 19 6 02 19/6/02 6:58 am Page 3
Turning the Power ON/OFF
Answering Calls
When the phone rings,
ZZ
,
KK--II
,
NN
,
JJ
or
LL
.
When an external call is incoming,
you can temporarily turn off the
handset ringer.
During an incoming call, Z and
hold U.È is displayed and the hand-
set ringing stops. (This function will
not work when the handset is on the
base unit or if an internal call is
incoming.)
Battery Life
Battery life is dependent on use and
conditions but in general when using
fully charged Ni-MH batteries:
Talk time: 20hrs approx.
Standby time: 200hrs approx.
When using Ni-Cd batteries (based on
800mA per hour)
Talk time: 12hrs approx.
Standby time: 100hrs approx.
(Times indicated are for peak performance)
The batteries reach peak performance
after several full charges.
The batteries cannot be overcharged
unless they are repeatedly removed
and replaced.
If battery life is shortened then
please check that battery and charge
terminals are clean.
For maximum battery life it is recom-
mended that the handset is not
recharged until battery icon flashes
(
ÛÛ
).
Replacing the batteries
Using the Telephone
Battery Charging
4
Turn Power ON
Z and hold ±.
When button is released, display
changes to the standby mode and a
confirmation tone sounds.
Turn Power OFF
From the standby mode, Z and
hold ± until a long tone sounds.
The display goes blank. If you put the
handset in the base unit, the battery
icon will display.
(Before Initial Use)
! The batteries must be charged
for approximately 15 hours
before initial use.
After the batteries have been inserted
into the handset, place the handset in
the powered up base unit.
(The telephone line cord must not
be connected to the telephone
socket at this time. Please leave
your standard telephone connect-
ed until battery charging is com-
plete).
The batteries are fully charged only
when
ÒÒ
is flashing.
(After Initial Use)
When the battery icon flashes (and, if
programmed, battery low alarm
sounds), the handset should be
charged immediately because there is
little energy left in the batteries.
If the
ÛÛ
icon flashes after a few
telephone calls even when the hand-
set batteries have been fully charged,
the batteries must be replaced.
! Charge new batteries for
approximately 15 hours before
initial use.
(The telephone line cord must not
be connected to the telephone
socket at this time).
If the batteries are removed, the bat-
tery icon is reset to
ÛÛ
(less than
30% capacity). In this case, even if
fully charged batteries are fitted, the
icon remains as
ÛÛ
until a full
charge cycle is complete.
On replacing the batteries, ensure
that the correct battery type is select-
ed (see ‘Handset Settings’).
650bx engversion 19 6 02 19/6/02 6:58 am Page 4
Making Calls
ZZ
.
Dial the number.
After a few seconds, the call duration
is displayed. The dialled number is
stored in the redial memory.
When you are finished with the
call,
ZZ
±.
Alternatively, dial the number,
then Z‰. This procedure
allows you to edit / confirm the
number before dialling.
If you misdial, ZW.
If Î flashes and an alarm tone
sounds when you press ,
move closer to the base unit and
try your call again.
Setting the Receiver
Volume
During a phone call,
ZZ SS
/
UU
to change the volume setting to
LOW (o), MEDIUM (oo) or HIGH
(ooo).
Handset Locator / Paging
Using this feature you can locate
a misplaced handset by paging.
ZZÏÏ
on the base unit.
All handsets ring for 1 minute.
ZZÏÏ
again or
ZZ
on (one of)
the handset(s) to stop ringing.
Making a Call from the
Redial List
The last 10 numbers dialled are
stored.
From the standby mode
ZZXX
.
ZZSS
/
UU
to select number.
(To exit the redial list,
ZZ±±
).
ZZ
.
Caller ID Service
Redialling the Last Number
Dialled
ZZ
.
ZZXX
.
The last number dialled displays and
is dialled.
Redialling
Using the Telephone
5
Caller ID is a service of your
Network provider and will only
operate if you have subscribed to
this feature.
After subscribing to Caller
ID, this phone will display
the callers information.
If your unit is connected to a PBX or a
telephone line that does not support this
service you will not be able to use it.
Caller ID does not display caller
information while using the handset
for an intercom call. However, the
caller’s information will be stored to
the Caller ID List.
Making a Call from the
Caller ID List
The last 50 caller’s phone numbers
are stored in the order the calls were
received.
From the standby mode
ZZSS
/
UU
.
The newest number is displayed.
If there are no numbers stored
in the Caller ID list no item is
displayed.
ZZSS
/
UU
to select number.
ZU to scroll to previous calls
and S to the most recent calls.
Only the most recent call from
the same phone number is
stored.
Only 12 digits of a phone num-
ber are displayed. To display
the remaining digits of longer
phone numbers,
ZZCC..
On selection
ZZ
.
650bx engversion 19 6 02 19/6/02 6:58 am Page 5
Using the telephone
Making a Call from the
Caller ID List (cont.)
After you have viewed a phone num-
ber, answered the call or called back
the caller, “” is added to the caller’s
number.
After viewing all new caller ID num-
bers, the call counter is reset to zero.
To exit the Caller ID list
ZZ±±..
Caller ID List Menu /
Redial List Menu
You can save numbers from the redial
list/Caller ID list into speed dial, edit
or clear from memory.
From the standby mode
ZZXX
(to access Redial list) or
ZZSS
/
UU
(to access Caller ID list).
ZZSS
/
UU
to select number from
list.
ZZVV
.
ssaavvee ssppeeeedd
is displayed.
ZZSS
/
UU
to select a menu item
then follow the instructions
below.
6
save speed
edit call no
clear
all clear
(Clear a Number in the
List):
ZZVV..
ZZSS
/
UU
to select
yyeess
(YES).
ZZVV..
cclleeaarreedd
is displayed, a confirmation
tone sounds and the next number is
displayed. If you clear the last num-
ber,
nnoo iitteemm
is displayed.
To add digits
ZZKK
-
II
.
To clear digits
ZZWW..
Either
ZZ
to dial or to save
the number,
ZZYY
.
ssaavvee ssppeeeedd
is displayed.
ZZYY
.
ZZYY
to save.
(Edit a Number in the List):
ZZVV
.
ZZTT
/
VV
to move the edit point.
Digits are added or deleted to the left
of the flashing digit.
(Save a Number in the List
as a Speed Dial):
ZZVV
.
Á is displayed.
ZZYY
.
(Clear all Numbers in the
List):
ZZVV
.
ZZSS
/
UU
to select
yyeess
(YES).
ZZVV..
A confirmation tone sounds and
cclleeaarreedd
, then
nnoo iitteemm
is displayed.
To exit the menu at any time,
ZZ±±
.
650bx engversion 19 6 02 19/6/02 6:58 am Page 6
7
Using the telephone
Speed Dialling
You can store up to 20 telephone
numbers in the handset.
Storing New Numbers
From the standby mode
ZZYY
.
new speed is displayed.
ZZVV
.
Á and an index number 00 - 19 is
displayed.
*Enter a phone number (max 24
digits).
ZZYY
.
saved is displayed. To enter another
number repeat from *.
If speed dial memory is full memory
full is displayed.
Dialling Stored Numbers
ZZÁÁ
.
ZZSS
/
UU
to select number.
OR
ZZ
00 - 19 to select index number
directly.
ZZ
.
If you press W, or no digits are
entered for over 1 minute, speed dial
is cancelled.
Saving Numbers to Speed
Dial from Other Lists
Please reference “Caller ID List
Menu/Redial List Menu”.
Speed Dial List Menu
You can edit or clear a speed dial
number from memory or assign a hot
key to any speed dial number.
From the standby mode
ZZÁÁ
.
ZZSS
/
UU
to select number from
list.
(Edit the Speed Dial
Number):
ZZVV
.
ZZTT
/
VV
to move the edit point.
Digits are added or deleted to the left
of the flashing digit.
To add digits
ZZKK
-
II
.
To clear digits
ZZWW
.
ZZYY
to save.
edit
clear
hot key reg
ZZVV
.
eeddiitt
is displayed.
ZZSS
/
UU
to select a menu item
then follow the instructions that
follow:
(Clear a Speed Dial
Number):
ZZVV..
ZZSS
/
UU
to select
yyeess
(YES).
ZZVV..
cclleeaarreedd
is displayed, a confirmation
tone sounds and the next number is
displayed. If you clear the last
number,
nnoo iitteemm
is displayed.
(Register a Speed Dial
Number as a Hot Key
AA
-
II
):
ZZVV
.
ZZSS
/
UU
to select a key
from 1-9.
If a key has already been assigned as
a hot key, it will flash in the
display.
ZZVV
.
ZZSS
/
UU
to select
yyeess
(YES).
ZZVV
.
The speed dial number is displayed
and a confirmation tone sounds.
To exit the menu at any time,
ZZ±±..
650bx engversion 19 6 02 19/6/02 6:59 am Page 7
8
Using the telephone
Hot Key
Dialling a Hot Key Number
You can assign the dialling buttons
AA
-
II
as hot keys. You can
choose 9 phone numbers from the
speed dial list (See “Register a Speed
Dial Number as a Hot Key”).
ZZ
and hold a key
AA
-
II
.
The number stored with that key is
displayed.
ZS / U to view other numbers
stored.
ZZ
to dial.
Clearing Caller Information
from a Hot Key
ZZ
and hold a key
AA
-
II
.
The number stored with that key is
displayed.
ZZVV
.
cclleeaarr
is displayed.
ZZVV
.
ZZSS
/
UU
to select
yyeess
(YES).
ZZVV
.
650bx engversion 19 6 02 19/6/02 6:59 am Page 8
9
Additional Features
Temporary Tone Dialling
Dialling Pause
! This function is for PBX
line/long distance service users.
A dialling pause is used when a
pause in the dialling of the phone
number is necessary using a PBX or
accessing a long distance service. (see
“Select Pause Timing”).
For example, when 9 (line access
number) is dialled followed by a
pause to access an outside line
through a PBX:
ZZII
.
ZZXX
. (‘p’ is displayed on the
LCD).
Enter telephone number.
ZZ
.
Entering a pause prevents misdi-
alling when you redial or dial a stored
number.
Pressing X once creates one pause.
To extend the pause requirement
time, ZX accordingly.
Recall Feature
Key Lock
You can lock the handset dialling but-
tons. Only incoming calls are accept-
ed while the key lock is ON.
Turn Key Lock ON
ZZ
and hold
YY
until a beep sounds.
Ó’ is displayed and all dialling
buttons are locked.
! When the key lock is ON,
emergency calls cannot be made
until key lock is cancelled.
Turn Key Lock OFF
ZZ
and hold
YY
until a beep sounds.
Ó’ disappears and key lock is can-
celled.
The key lock is also cancelled if the
handset is turned off.
M is used to access special tele-
phone services. Contact your Network
provider for details.
If your unit is connected to a PBX,
pressing
M allows you to access
some features of your host PBX such
as transferring an extension call.
! This function is for Rotary or
Pulse service users.
ZZJJ
before entering access num-
bers which require tone dialling.
The dialling mode is switched to tone.
You can enter numbers for dialling
which require tone dialling eg. elec-
tronic banking service.
When you hang up, the mode will
return to pulse.
650bx engversion 19 6 02 19/6/02 6:59 am Page 9
Handset Settings
(Alarm Settings):*
ZZVV
.
ZZSS
/
UU
.
Handset Settings
10
(Select Ringer Pattern for
Alarm tone):**
** There are 20 patterns available
for each ringer option.
ZZVV
.
ZZSS
/
UU
to select ringer pattern.
ZV.
(Select Ringer Pattern for
Paging tone)**
To program see ** below.
(Select Ringer Pattern for
Internal call)**
To program see ** below.
(Select Ringer Pattern for
External Incoming call)**
To program see ** below.
(Select the Handset Ringer
Volume):
ZZVV
.
ZZSS
/
UU
to select Ringer Volume.
The choices are 6 levels or OFF.
ZZVV
.
(Ringer Settings):
ZZVV
.
ZZSS
/
UU
.
(Set Alarm):
ZZVV
.
ZZSS
/
UU
to select
oonnccee
(Once),
rreeppeeaatt ddaaiillyy
(Repeat Daily) or
ooffff
(Off).
ZZVV
.
To Stop Alarm
When the alarm sounds,
ZZ
,
KK
-
II
,
JJ
or
LL
.
Alarm stops and display returns to
the standby mode. If once is selected,
the setting is turned off.
When in talk or intercom mode the
alarm will not sound until the call is
ended.
* For this feature to work you must
first set the Clock (see “Base Unit
Settings”).
(Set Time of Alarm):*
ZZVV
.
ZZKK
-
II
to enter time (4 dig-
its) - 24 hour clock. Digits are entered
over the flashing digit.
To clear ZW.
ZZYY
to save.
ZZSS
/
UU
to select
oonnccee
(Once),
rreeppeeaatt ddaaiillyy
(Repeat Daily) or
ooffff
(Off).
ZZVV
.
You can change the handset settings using a handset near the base unit.
Before proceeding with any of the main menu items listed in this chap-
ter, the following procedure must initially be carried out:
From the Standby mode,
ZZVV
.
ZZSS
/
UU
to select
sseettttiinngg hhss
(Setting Handset).
ZZVV
.
ZZSS
/
UU
to select main menu items from below (see menus in shaded text
boxes):
To exit the menu at any time,
ZZ±±
.
ZZTT
or
WW
to return to previous step during programming.
set time
set alarm
ringer opt
ringer vol
ext ringer
int ringer
paging
alarm
2
1
3
4
time alarm
650bx engversion 19 6 02 19/6/02 6:59 am Page 10
Handset Settings
11
(Enter a Direct Call
Number):
After a Direct Call phone number has
been entered and Direct Call set to
ON, you can call the Direct Call num-
ber only, by pressing . Incoming
calls are accepted.
ZZVV
.
Enter phone number.
ZZYY
.
ZZVV
to save the entered number.
ZZSS
/
UU
to select
oonn
(On) or
ooffff
(Off).
ZV.
If on is selected,
ËË
is displayed.
(Call Options):
ZZVV
.
ZZSS
/
UU
.
(Select Talk Mode Display):
ZZVV
.
ZZSS
/
UU
to select from
ttaallkk
ttiimmee
(Length of Call) or
pphhoonnee nnoo
(Phone Number).
ZZVV
.
(Select Standby Mode
Display):
ZZVV
.
ZZSS
/
UU
to select from
bbss nnoo
(Base Unit number),
hhss nnoo
(Handset Number),
cclloocckk
(Clock)
or
ooffff
(Off).
ZZVV
.
(Display Options):
ZZVV
.
ZZSS
/
UU
.
(Set Battery Low Tone
ON/OFF)***
*** Program as follows:
ZZVV
.
ZZSS
/
UU
to select ON/OFF.
ZZVV
.
(Set Range Alarm ON/OFF)
***
To program see *** below.
Alarm will sound when you move out
of range of a base unit.
(Set Call Waiting Tone
ON/OFF)***
To program see *** below.
Call waiting tone sounds when an
incoming external call is received
during an intercom call.
(Set Key Confirmation
Tone ON/OFF)***
To program see *** below.
(Tone Settings):
ZV.
ZS/U.
! Time will only be displayed if
the clock has been set (see “Base
Unit Settings”).
(Set Call Prohibition
ON/OFF):
This allows you to make emergency
and intercom calls only.
ZZVV
.
Enter handset PIN (4 digits).
If the PIN is incorrect an error tone
sounds.
ZZSS
/
UU
to select
oonn
(On) or
ooffff
(Off).
ZV.
If on is selected, Ô is displayed.
tone opt
call waiting
range alarm
battery low
display opt
standby mode
key tone
direct no
call bar
call opt
talk mode
Before programming, please follow steps 1 to 4 of ‘Handset Settings’.
650bx engversion 19 6 02 19/6/02 6:59 am Page 11
12
Handset Settings
set direct
other opt
hspin change
battery type
registration
register hs
cancel base
select bs
reset hs
(Reset the Handset
Settings):
You can reset all of the handset set-
tings to their initial factory settings
(see ‘Handset Initial Settings’).
ZZVV
.
Enter handset PIN (4 digits).
If PIN is correct, no is displayed.
ZZSS
/
UU
to select
yyeess
(Yes).
ZV.
cleared is displayed and display
returns to settings menu.
(Cancelling a Base Unit)*
(Registering a Handset to
a Base Unit)*
(Registration):*
ZZVV
.
ZZSS
/
UU
.
(Set Battery Type Ni-MH /
Ni-Cd):
Select the type of battery installed. If
the battery type selected is not the
same as the type of battery installed,
the battery level icons will not be cor-
rect.
ZZVV
.
ZZSS
/
UU
to select
nnii--mmhh
(Ni-MH)
or
nnii--ccdd
(Ni-Cd).
ZZVV
.
(Set Auto Talk ON/OFF):
If you set Auto Talk to ON, you can
answer the phone by lifting the hand-
set off the base unit.
ZV.
ZZSS
/
UU
to select
oonn
(On) or
ooffff
(Off).
ZV.
auto talk
(Other Options):
ZZVV
.
ZZSS
/
UU
.
(Set Direct Call ON/OFF):
ZZVV
.
ZZSS
/
UU
to select
oonn
(On) or
ooffff
(Off).
ZZVV
.
If ON is selected, Ë is displayed.
(Change Handset PIN):
You can change the 4 digit password
for the handset. The factory preset is
0000.
ZZVV
.
Enter current handset PIN (4 dig-
its).
Enter new PIN (4 digits). (The new
PIN does not display).
Re-enter the new PIN. (If the PIN
is entered incorrectly, an error tone
sounds and display returns to
new pin ____.
! Once you have programmed the
password, you cannot confirm it. We
recommend you write down the
password. If you forget it, please
consult your nearest Panasonic
Service Centre.
(Select Base Unit)*
*
For information on registering
handset(s), cancelling and selecting
base unit(s), please refer to ‘For
Optional Multi-Unit Users’.
Before programming, please follow steps 1 to 4 of ‘Handset Settings’.
650bx engversion 19 6 02 19/6/02 6:59 am Page 12
a
A basic guide to operations & features.
Pull out this Quick Guide for easy reference
Quick G
uide &
Useful Information
Switch handset on / off until a confirmation tone sounds.
Answer a call Z‰.
Make a call Dial the number and Z‰.
Turn Key Lock on/off ZY and hold for more than 2 seconds.
Hang up .
Redial last number Z‰, ZX.
Store a number ZY. ZV enter number, ZY.
Dial a stored number . ZS/U to select a number, Z‰.
Dial from the Redial List ZX. ZS/U to select a number, Z‰.
Adjust Receiver volume ZS/U during a call.
Call another handset ZN then the handset number.
Transfer a call ZN enter the handset number, .
Three way call ZN enter the handset number, ZC.
Dial from the Caller ID List ZS/U to select a number, Z‰.
Function Action
650bx engversion 19 6 02 19/6/02 6:59 am Page a
b
YYoouurr GGuuiiddee ttoo tthhee DDiissppllaayy
Note: The LCD display of the handset can display up to 7 segments and each
character will be displayed as shown in the following table. Some characters will
be displayed in a different way; for example, the character M is displayed n.This
is not a defect of the handset display, it is simply the representation of the char-
acters used in this kind of display.
9
Display Message Display Meaning
alarm
all clear
auto
auto talk
base
battery low
battery type
bs no
bs pin
call bar
call opt
call waiting
cancel base
clear
cleared
clock
direct no
display opt
edit
edit call no
ext ringer
hs no
hs pin
hs pin change
hot key reg
input code
int ringer
key tone
memory full
new speed
new pin
no
Alarm
All Clear
Automatic
Automatic Talk
Base
Battery Low
Battery Type
Base Number
Base Unit Pin
Call Bar
Call Option
Call Waiting
Cancel Base
Clear
Cleared
Clock
Direct Number
Display Option
Edit
Edit a Call no.
External Ringer
Handset Number
Handset PIN
Change Handset PIN
Register Hot Key
Input Code
Internal Ringer
Key Tone
Memory Full
New Speed
New PIN
No
650bx engversion 19 6 02 19/6/02 6:59 am Page b
c
Display Message Display Meaning
ni-cd
ni-nh
no item
off
old pin
on
once
other opt
out of area
paging
phone no
private
range alarm
register hs
registration
ringer
ringer off
ringer opt
ringer vol
repeat daily
reset hs
save
saved
save speed
select bs
set alarm
set direct
set time
setting bs
setting hs
standby mode
talk mode
talk time
time alarm
tone opt
verify
vol
yes
Ni-Cd
Ni-MH
No Item
Off
Old Pin
On
Once
Other Option
Out of Area
Paging
Phone Number
Private
Range Alarm
Register Handset
Registration
Ringer
Ringer Off
Ringer Option
Ringer Volume
Repeat Daily
Reset Handset
Save
Saved
Save Speed
Select Base
Set Alarm
Set Direct
Set Time
Setting Base
Setting Handset
Standby Mode
Talk Mode
Talk Time
Time Alarm
Tone Option
Verify
Volume
Yes
650bx engversion 19 6 02 19/6/02 6:59 am Page c
d
Location of Controls
Icon Displays Flashes
Î
Ï
Û
Ú
Ò
Ë
Ô
Â
È
Ó
Á
Within range of a base unit
Intercom mode
Making or answering calls
Less than 30% battery capacity
30% to 50% battery capacity
50% to 100% battery capacity
In Direct Call mode
In Call Prohibition mode
In setting mode
Ringer tone temporarily OFF
Key Lock ON
Speed Dial List/Mode
Out of range
Paging or another unit pages the
handset
Outside call is received
Û - Recharge battery
Ò - Fully charged
Handset controls
# - Receiver
$ - Function/OK Button
% - Talk Off/Power Button
& - Cancel Button
' - Intercom Button
( - Charge Contact
) - Display
* - Speed Dial Button
+ - Talk Button
, - Navigator Key
- - Redial/Pause Button
. - Recall Button
/ - Charge Contact
0 - Microphone
Base unit controls
- Page button
#
$
%
&
'
(
)
*
+
,
-
.
/
0
Handset Display
650bx engversion 19 6 02 19/6/02 6:59 am Page d
Base Unit Settings
Base Unit Settings
You can change the base unit settings using a handset near the base unit.
Before proceeding with any of the base settings listed in this chapter,
the following procedure must initially be carried out:
From the standby mode,
ZZVV
.
ZZSS
/
UU
to select
sseettttiinngg bbss
(Setting Base).
ZZVV
.
iinnppuutt ccooddee
is displayed. From this display, follow the instructions after
each heading.
Please note: Where ‘Enter PIN’ is stated in this chapter, it refers to the 4 digit
Base Unit PIN. (The factory setting is 0000).
To exit the menu at any time,
ZZ±±
.
Ringer Mode
To select all handsets to
ring
ZZAA
.
Enter PIN.
ZZAA
.
ZZVV
.
To select specific hand-
set(s) to ring
ZZAA
.
Enter PIN.
ZZBB
.
ZZAA
-
FF
to select handset(s).
The selected handsets will be flash-
ing.
ZZVV
.
To select specific handset(s)
then all handsets to ring
The specific handset(s) will ring for a
selected number of rings. If not answered,
all handsets will ring.
ZZAA
.
Enter PIN.
ZZCC
.
ZZAA
-
FF
to select handset(s)
to ring.
ZZVV
.
ZZAA
-
FF
to select number of
rings.
ZZVV
.
Select Base Unit
Ringer Volume
ZZBB
twice.
ZZKK
(Off) or
AA
-
CC
to
select volume.
ZZVV
.
Select Dialling mode
(Tone/Pulse)
13
You can change the dialling mode to
tone or pulse depending upon your
network service. If you have a touch
tone service, select tone. If you have
rotary or pulse service, select pulse.
ZZCC
.
Enter PIN.
ZZAA
.
ZZAA
for Tone
OR
ZZBB
for Pulse
ZZVV
.
2
1
3
650bx engversion 19 6 02 19/6/02 6:59 am Page 13
14
Base Unit Settings
Set the 4 - Digit Base
Unit PIN
Select Pause Timing
Select the Earth or
Flash Mode
Set Call Restriction
An earth relay can be installed as an
option depending on your PBX
requirements (see ‘Additional
Features’). Please consult your near-
est Panasonic Service centre for
installation. On installation, you can
select flash or earth mode to suit
your PBX or network provider.
ZZCC
.
Enter PIN.
ZZBB
then
BB
for earth mode
OR
ZZBB
then
AA
for flash mode.
If flash is selected and flash times are
required:
ZZAA
for flash 1 (100 msec) or
ZZBB
for flash 2 (600 msec) or
ZZCC
for flash 3 (300 msec)
ZZVV
.
You can change the 4 - digit password
for the base unit. The factory preset
is 0000.
ZZEE
.
Enter PIN.
Enter New PIN (4 digits) twice.
You can set the pause timing to 3 or 5
seconds, depending on your PBX
requirements (see “Dialling Pause”).
ZZCC
.
Enter PIN.
ZZCC
.
ZZAA
to select 3 seconds
OR
ZZBB
to select 5 seconds.
ZZVV
.
If entered incorrectly, an error tone
sounds.
If entered correctly, a confirmation
tone sounds.
! Once you have programmed
the password, you cannot con-
firm it. We recommend you
write down the password. If you
forget it, please consult your
nearest Panasonic Service
Centre.
You can restrict selected handset(s)
from dialling selected phone numbers.
You can assign up to 6 call restriction
numbers (up to 8 digits).
ZZFF
.
Enter PIN.
All registered handset numbers are
displayed.
ZZAA -- FF
to select hand-
set(s) to restrict.
The selected handset(s) will flash.
ZZVV
.
Enter a restriction number (max.
8 digits).
(If you misdial ZW).
ZZYY
to confirm restriction num-
ber.
To continue entering call restriction
numbers (max. 8 digits), enter the
number, then
ZZYY
.
On completion,
ZZYY
.
! If you dial a restricted number,
the call does not connect and
restricted number flashes.
Cancel Call Restricted
Handset(s)
ZZFF
.
Enter PIN.
ZZAA
-
FF
to select handset(s)
to cancel.
The selected handset(s) will stop
flashing.
ZZVV
.
ZZ±±
to return to the standby mode.
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
650bx engversion 19 6 02 19/6/02 6:59 am Page 14
15
Base Unit Settings
Cancel Call Restricted
Numbers
ZZFF
.
Enter PIN.
ZZVV
.
ZZWW
to cancel number.
ZZYY
.
ZZ±±
to return to the standby mode.
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
Set the Clock
ZZJJ
.
Enter a new time (4 digits) (24
hour time) (
ZZKK
-
II
).
ZZYY
.
! After a mains power failure the
clock needs to be reset.
Reset the Base Unit
You can reset all of the base unit set-
tings to their initial factory settings.
(see “Base Unit Initial Settings”).
ZZKK
.
Enter PIN.
ZZYY
.
! If the base unit is reset,
the Caller ID list will
clear.
650bx engversion 19 6 02 19/6/02 6:59 am Page 15
16
Initial Settings
Handset Initial Settings
Function Initial Setting
Time Alarm Mode
Alarm Time
Handset Ringer Volume
Handset External Ringer Pattern
Handset Internal Ringer Pattern
Handset Paging Tone Pattern
Handset Alarm Tone Pattern
Key Tone
Call Waiting Tone
Range Warning Alarm
Battery Low Alarm
Standby Mode Display
Talk Mode Display
Call Prohibition Mode
Direct Call Mode
Direct Call Number
4 Digit Handset PIN
Auto Talk
Base Unit Access
Handset Receiver Volume
Redial Memory
OFF
Clear
3
1
1
1
1
ON
ON
OFF
ON
Base Unit Number
Length of the Call
OFF
OFF
Clear
0000
OFF
Automatic Base Unit Access
2
All Clear
Function Initial Setting
Ringer Mode
Number of Rings
Dialling Mode
Earth/Flash
Flash Timing
Pause Timing
Call Restricted Handset(s)
Call Restriction Number(s)
Base Unit PIN
Base Unit Ringer Volume
All Handsets
3
Tone
Flash
600m seconds
3 seconds
All Clear
All Clear
0000
Medium
To reset handset to initial settings refer to “Handset Settings”.
To reset base unit to initial settings refer to “Base Unit Settings”.
Base Unit Initial Settings
650bx engversion 19 6 02 19/6/02 6:59 am Page 16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Panasonic Cordless Telephone KX-TCD650BX Manuale utente

Categoria
Telefoni
Tipo
Manuale utente
Questo manuale è adatto anche per