Panasonic Cordless Telephone KX-TCD650BX Manuale utente

Marca: Panasonic

Modello: Cordless Telephone KX-TCD650BX

Categoria: Telefoni

Tipo: Manuale utente

Questo manuale è adatto anche per

KX-TCD650BX

Safety Information . . . . . . . . . . . .2

Setting up . . . . . . . . . . . . . . . . . .2

Using the Telephone . . . . . . . . . .4

Additional Features . . . . . . . . . . .9

Handset Settings . . . . . . . . . . . .10

Base Unit Settings . . . . . . . . . . .13

Initial Settings . . . . . . . . . . . . . .16

For Optional Multi Unit Users . .17

Before Requesting Help . . . . . . .20

Index . . . . . . . . . . . . . . . . . . . . .22

Caller ID compatible

Please read before use and save

Charge the batteries for approx. 15 hours before initial use

Model No:

KX-TCD650BX

Digital

Cordless Phone

Operating Instructions

& Quick Guide

Centre Page Pullout

650bx engversion 19 6 02 19/6/02 6:58 am Page 1

Safety Information

Setting Up

Battery Caution

Use only specified batteries.

Only use rechargeable batteries.

Do not mix old and new batteries.

Do not dispose of batteries in a fire,

they may explode. Check local waste

management codes for special

disposal instructions.

Do not open or mutilate the

batteries. Released electrolyte is cor-

rosive and may cause burns or injury

to the eyes or skin. The electrolyte

may be toxic if swallowed.

Exercise care in handling the

batteries in order not to short the

batteries with conductive materials

such as rings, bracelets and keys.

The batteries and/or conductor may

overheat and cause burns.

Charge the batteries provided in

accordance with the information

given in this operating guide.

General Safety

Accessories (Included)

AC Adaptor 1

Telephone Line 1

Cord

Batteries 2

(AA Size)

Battery Cover 1

Operating 1

Instructions

Additional accessories are available

for purchase. Contact your

Panasonic Service Centre for fur-

ther details.

Only use the power supply included

with the product.

Do not connect the AC Adaptor to any

AC outlet other than the

standard AC230V.

The apparatus is approved for use

with PQLV19CE power supply.

This apparatus is unable to make

emergency telephone calls under the

following conditions:

The portable handset batteries

need recharging, or have failed.

During a mains power failure.

When the Key Lock is set to

ON.

When the unit is in Direct Call

mode.

Do not open the base unit or handset

(other than to change the batteries).

This apparatus should not be used

near emergency/intensive care

medical equipment and should not be

used by people with pacemakers.

Care should be taken that objects do

not fall onto, and liquids are not

spilled into the unit. Do not subject

this unit to excessive smoke, dust,

mechanical vibration or shock.

Environment

Do not use this unit near water.

This unit should be kept away from

heat sources such as radiators, cook-

ers, etc. It should also not be placed

in rooms where the

temperature is less than 5

C or

greater than 40

The AC Adaptor is used as the main

disconnect device, ensure that the AC

outlet is located / installed near the

unit and is accessible.

WARNING:

TO PREVENT THE RISK OF

ELECTRICAL SHOCK, DO NOT

EXPOSE THIS PRODUCT TO

RAIN OR ANY OTHER TYPE OF

MOISTURE.

650bx engversion 19 6 02 19/6/02 6:58 am Page 2

LINE

Insert the Batteries

Hook

6cm

Notice

Some features described in these

operating instructions/Quick Guide

are dependent upon subscription to

your Network provider (e.g Caller ID).

All features of this type

will be marked through-

out the manual with this

icon.

Please note throughout this operat-

ing instructions/Quick Guide that the

word “PRESS” is depicted by this

symbol Z.

Setting Up

Please ensure the batteries are

inserted as shown.

Connection

Plug in the AC adaptor and the tele-

phone line cord in order #, $, %.

WARNING:

DO NOT CONNECT THE TELE-

PHONE LINE CORD TO THE

PHONE SOCKET & UNTIL THE

HANDSET IS FULLY CHARGED.

Fasten the AC adaptor cord to pre-

vent it from being disconnected.

The AC Adaptor must remain con-

nected at all times. (It is normal for

the adaptor to feel warm during use).

Location

For maximum distance noise-free

operation, place your base unit:

-Away from electrical appliances such

as TV, radio, personal computer or

another phone.

-In a convenient high and central loca-

tion.

Wall Mounting

This unit can be mounted on a wall.

Insert screws into wall. The centres of

the screw holes should be 6cm

vertically apart.

Connect the AC adaptor and the tele-

phone line cord.

Arrange the wires as shown, then

mount the unit.

650bx engversion 19 6 02 19/6/02 6:58 am Page 3

Turning the Power ON/OFF

Answering Calls

When the phone rings,

ZZ‰‰

KK--II

When an external call is incoming,

you can temporarily turn off the

handset ringer.

During an incoming call, Z and

hold U.È is displayed and the hand-

set ringing stops. (This function will

not work when the handset is on the

base unit or if an internal call is

incoming.)

Battery Life

Battery life is dependent on use and

conditions but in general when using

fully charged Ni-MH batteries:

Talk time: 20hrs approx.

Standby time: 200hrs approx.

When using Ni-Cd batteries (based on

800mA per hour)

Talk time: 12hrs approx.

Standby time: 100hrs approx.

(Times indicated are for peak performance)

The batteries reach peak performance

after several full charges.

The batteries cannot be overcharged

unless they are repeatedly removed

and replaced.

If battery life is shortened then

please check that battery and charge

terminals are clean.

For maximum battery life it is recom-

mended that the handset is not

recharged until battery icon flashes

(

ÛÛ

Replacing the batteries

Using the Telephone

Battery Charging

Turn Power ON

Z and hold ±.

When button is released, display

changes to the standby mode and a

confirmation tone sounds.

Turn Power OFF

From the standby mode, Z and

hold ± until a long tone sounds.

The display goes blank. If you put the

handset in the base unit, the battery

icon will display.

(Before Initial Use)

! The batteries must be charged

for approximately 15 hours

before initial use.

After the batteries have been inserted

into the handset, place the handset in

the powered up base unit.

(The telephone line cord must not

be connected to the telephone

socket at this time. Please leave

your standard telephone connect-

ed until battery charging is com-

plete).

The batteries are fully charged only

when

ÒÒ

is flashing.

(After Initial Use)

When the battery icon flashes (and, if

programmed, battery low alarm

sounds), the handset should be

charged immediately because there is

little energy left in the batteries.

If the

ÛÛ

icon flashes after a few

telephone calls even when the hand-

set batteries have been fully charged,

the batteries must be replaced.

! Charge new batteries for

approximately 15 hours before

initial use.

(The telephone line cord must not

be connected to the telephone

socket at this time).

If the batteries are removed, the bat-

tery icon is reset to

ÛÛ

(less than

30% capacity). In this case, even if

fully charged batteries are fitted, the

icon remains as

ÛÛ

until a full

charge cycle is complete.

On replacing the batteries, ensure

that the correct battery type is select-

ed (see ‘Handset Settings’).

650bx engversion 19 6 02 19/6/02 6:58 am Page 4

Making Calls

ZZ‰‰

Dial the number.

After a few seconds, the call duration

is displayed. The dialled number is

stored in the redial memory.

When you are finished with the

call,

±.

Alternatively, dial the number,

then Z‰. This procedure

allows you to edit / confirm the

number before dialling.

If you misdial, ZW.

If Î flashes and an alarm tone

sounds when you press ‰,

move closer to the base unit and

try your call again.

Setting the Receiver

Volume

During a phone call,

ZZ SS

to change the volume setting to

LOW (o), MEDIUM (oo) or HIGH

(ooo).

Handset Locator / Paging

Using this feature you can locate

a misplaced handset by paging.

ZZÏÏ

on the base unit.

All handsets ring for 1 minute.

ZZÏÏ

again or

ZZ‰‰

on (one of)

the handset(s) to stop ringing.

Making a Call from the

Redial List

The last 10 numbers dialled are

stored.

From the standby mode

ZZXX

ZZSS

to select number.

(To exit the redial list,

ZZ±±

ZZ‰‰

Caller ID Service

Redialling the Last Number

Dialled

ZZ‰‰

ZZXX

The last number dialled displays and

is dialled.

Redialling

Using the Telephone

Caller ID is a service of your

Network provider and will only

operate if you have subscribed to

this feature.

After subscribing to Caller

ID, this phone will display

the callers information.

If your unit is connected to a PBX or a

telephone line that does not support this

service you will not be able to use it.

Caller ID does not display caller

information while using the handset

for an intercom call. However, the

caller’s information will be stored to

the Caller ID List.

Making a Call from the

Caller ID List

The last 50 caller’s phone numbers

are stored in the order the calls were

received.

From the standby mode

ZZSS

The newest number is displayed.

If there are no numbers stored

in the Caller ID list no item is

displayed.

ZZSS

to select number.

ZU to scroll to previous calls

and S to the most recent calls.

Only the most recent call from

the same phone number is

stored.

Only 12 digits of a phone num-

ber are displayed. To display

the remaining digits of longer

phone numbers,

ZZCC..

On selection

ZZ‰‰

650bx engversion 19 6 02 19/6/02 6:58 am Page 5

Using the telephone

Making a Call from the

Caller ID List (cont.)

After you have viewed a phone num-

ber, answered the call or called back

the caller, “⁄” is added to the caller’s

number.

After viewing all new caller ID num-

bers, the call counter is reset to zero.

To exit the Caller ID list

ZZ±±..

Caller ID List Menu /

Redial List Menu

You can save numbers from the redial

list/Caller ID list into speed dial, edit

or clear from memory.

From the standby mode

ZZXX

(to access Redial list) or

ZZSS

(to access Caller ID list).

ZZSS

to select number from

list.

ZZVV

ssaavvee ssppeeeedd

is displayed.

ZZSS

to select a menu item

then follow the instructions

below.

save speed

edit call no

clear

all clear

(Clear a Number in the

List):

ZZVV..

ZZSS

to select

yyeess

(YES).

ZZVV..

cclleeaarreedd

is displayed, a confirmation

tone sounds and the next number is

displayed. If you clear the last num-

ber,

nnoo iitteemm

is displayed.

To add digits

ZZKK

To clear digits

ZZWW..

Either

ZZ‰‰

to dial or to save

the number,

ZZYY

ssaavvee ssppeeeedd

is displayed.

ZZYY

to save.

(Edit a Number in the List):

ZZVV

ZZTT

to move the edit point.

Digits are added or deleted to the left

of the flashing digit.

(Save a Number in the List

as a Speed Dial):

ZZVV

Á is displayed.

ZZYY

(Clear all Numbers in the

List):

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV..

A confirmation tone sounds and

cclleeaarreedd

, then

nnoo iitteemm

is displayed.

To exit the menu at any time,

ZZ±±

650bx engversion 19 6 02 19/6/02 6:58 am Page 6

Using the telephone

Speed Dialling

You can store up to 20 telephone

numbers in the handset.

Storing New Numbers

From the standby mode

ZZYY

new speed is displayed.

ZZVV

Á and an index number 00 - 19 is

displayed.

*Enter a phone number (max 24

digits).

ZZYY

saved is displayed. To enter another

number repeat from *.

If speed dial memory is full memory

full is displayed.

Dialling Stored Numbers

ZZÁÁ

ZZSS

to select number.

00 - 19 to select index number

directly.

ZZ‰‰

If you press W, or no digits are

entered for over 1 minute, speed dial

is cancelled.

Saving Numbers to Speed

Dial from Other Lists

Please reference “Caller ID List

Menu/Redial List Menu”.

Speed Dial List Menu

You can edit or clear a speed dial

number from memory or assign a hot

key to any speed dial number.

From the standby mode

ZZÁÁ

ZZSS

to select number from

list.

(Edit the Speed Dial

Number):

ZZVV

ZZTT

to move the edit point.

Digits are added or deleted to the left

of the flashing digit.

To add digits

ZZKK

To clear digits

ZZWW

ZZYY

to save.

edit

clear

hot key reg

ZZVV

eeddiitt

is displayed.

ZZSS

to select a menu item

then follow the instructions that

follow:

(Clear a Speed Dial

Number):

ZZVV..

ZZSS

to select

yyeess

(YES).

ZZVV..

cclleeaarreedd

is displayed, a confirmation

tone sounds and the next number is

displayed. If you clear the last

number,

nnoo iitteemm

is displayed.

(Register a Speed Dial

Number as a Hot Key

ZZVV

ZZSS

to select a key

from 1-9.

If a key has already been assigned as

a hot key, it will flash in the

display.

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV

The speed dial number is displayed

and a confirmation tone sounds.

To exit the menu at any time,

ZZ±±..

650bx engversion 19 6 02 19/6/02 6:59 am Page 7

Using the telephone

Hot Key

Dialling a Hot Key Number

You can assign the dialling buttons

as hot keys. You can

choose 9 phone numbers from the

speed dial list (See “Register a Speed

Dial Number as a Hot Key”).

and hold a key

The number stored with that key is

displayed.

ZS / U to view other numbers

stored.

‰ to dial.

Clearing Caller Information

from a Hot Key

and hold a key

The number stored with that key is

displayed.

ZZVV

cclleeaarr

is displayed.

ZZVV

ZZSS

to select

yyeess

(YES).

ZZVV

650bx engversion 19 6 02 19/6/02 6:59 am Page 8

Additional Features

Temporary Tone Dialling

Dialling Pause

! This function is for PBX

line/long distance service users.

A dialling pause is used when a

pause in the dialling of the phone

number is necessary using a PBX or

accessing a long distance service. (see

“Select Pause Timing”).

For example, when 9 (line access

number) is dialled followed by a

pause to access an outside line

through a PBX:

ZZII

ZZXX

. (‘p’ is displayed on the

LCD).

Enter telephone number.

ZZ‰‰

Entering a pause prevents misdi-

alling when you redial or dial a stored

number.

Pressing X once creates one pause.

To extend the pause requirement

time, ZX accordingly.

Recall Feature

Key Lock

You can lock the handset dialling but-

tons. Only incoming calls are accept-

ed while the key lock is ON.

Turn Key Lock ON

and hold

until a beep sounds.

‘Ó’ is displayed and all dialling

buttons are locked.

! When the key lock is ON,

emergency calls cannot be made

until key lock is cancelled.

Turn Key Lock OFF

and hold

until a beep sounds.

‘Ó’ disappears and key lock is can-

celled.

The key lock is also cancelled if the

handset is turned off.

M is used to access special tele-

phone services. Contact your Network

provider for details.

If your unit is connected to a PBX,

pressing

M allows you to access

some features of your host PBX such

as transferring an extension call.

! This function is for Rotary or

Pulse service users.

ZZJJ

before entering access num-

bers which require tone dialling.

The dialling mode is switched to tone.

You can enter numbers for dialling

which require tone dialling eg. elec-

tronic banking service.

When you hang up, the mode will

return to pulse.

650bx engversion 19 6 02 19/6/02 6:59 am Page 9

Handset Settings

(Alarm Settings):*

ZZVV

ZZSS

Handset Settings

(Select Ringer Pattern for

Alarm tone):**

** There are 20 patterns available

for each ringer option.

ZZVV

ZZSS

to select ringer pattern.

ZV.

(Select Ringer Pattern for

Paging tone)**

To program see ** below.

(Select Ringer Pattern for

Internal call)**

To program see ** below.

(Select Ringer Pattern for

External Incoming call)**

To program see ** below.

(Select the Handset Ringer

Volume):

ZZVV

ZZSS

to select Ringer Volume.

The choices are 6 levels or OFF.

ZZVV

(Ringer Settings):

ZZVV

ZZSS

(Set Alarm):

ZZVV

ZZSS

to select

oonnccee

(Once),

rreeppeeaatt ddaaiillyy

(Repeat Daily) or

ooffff

(Off).

ZZVV

To Stop Alarm

When the alarm sounds,

ZZ‰‰

Alarm stops and display returns to

the standby mode. If once is selected,

the setting is turned off.

When in talk or intercom mode the

alarm will not sound until the call is

ended.

* For this feature to work you must

first set the Clock (see “Base Unit

Settings”).

(Set Time of Alarm):*

ZZVV

ZZKK

to enter time (4 dig-

its) - 24 hour clock. Digits are entered

over the flashing digit.

To clear ZW.

ZZYY

to save.

ZZSS

to select

oonnccee

(Once),

rreeppeeaatt ddaaiillyy

(Repeat Daily) or

ooffff

(Off).

ZZVV

You can change the handset settings using a handset near the base unit.

Before proceeding with any of the main menu items listed in this chap-

ter, the following procedure must initially be carried out:

From the Standby mode,

ZZVV

ZZSS

to select

sseettttiinngg hhss

(Setting Handset).

ZZVV

ZZSS

to select main menu items from below (see menus in shaded text

boxes):

To exit the menu at any time,

ZZ±±

ZZTT

to return to previous step during programming.

set time

set alarm

ringer opt

ringer vol

ext ringer

int ringer

paging

alarm

time alarm

650bx engversion 19 6 02 19/6/02 6:59 am Page 10

Handset Settings

(Enter a Direct Call

Number):

After a Direct Call phone number has

been entered and Direct Call set to

ON, you can call the Direct Call num-

ber only, by pressing ‰. Incoming

calls are accepted.

ZZVV

Enter phone number.

ZZYY

ZZVV

to save the entered number.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

If on is selected,

ËË

is displayed.

(Call Options):

ZZVV

ZZSS

(Select Talk Mode Display):

ZZVV

ZZSS

to select from

ttaallkk

ttiimmee

(Length of Call) or

pphhoonnee nnoo

(Phone Number).

ZZVV

(Select Standby Mode

Display):

ZZVV

ZZSS

to select from

bbss nnoo

(Base Unit number),

hhss nnoo

(Handset Number),

cclloocckk

(Clock)

ooffff

(Off).

ZZVV

(Display Options):

ZZVV

ZZSS

(Set Battery Low Tone

ON/OFF)***

*** Program as follows:

ZZVV

ZZSS

to select ON/OFF.

ZZVV

(Set Range Alarm ON/OFF)

***

To program see *** below.

Alarm will sound when you move out

of range of a base unit.

(Set Call Waiting Tone

ON/OFF)***

To program see *** below.

Call waiting tone sounds when an

incoming external call is received

during an intercom call.

(Set Key Confirmation

Tone ON/OFF)***

To program see *** below.

(Tone Settings):

ZV.

ZS/U.

! Time will only be displayed if

the clock has been set (see “Base

Unit Settings”).

(Set Call Prohibition

ON/OFF):

This allows you to make emergency

and intercom calls only.

ZZVV

Enter handset PIN (4 digits).

If the PIN is incorrect an error tone

sounds.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

If on is selected, Ô is displayed.

tone opt

call waiting

range alarm

battery low

display opt

standby mode

key tone

direct no

call bar

call opt

talk mode

Before programming, please follow steps 1 to 4 of ‘Handset Settings’.

650bx engversion 19 6 02 19/6/02 6:59 am Page 11

Handset Settings

set direct

other opt

hspin change

battery type

registration

cancel base

select bs

reset hs

(Reset the Handset

Settings):

You can reset all of the handset set-

tings to their initial factory settings

(see ‘Handset Initial Settings’).

ZZVV

Enter handset PIN (4 digits).

If PIN is correct, no is displayed.

ZZSS

to select

yyeess

(Yes).

ZV.

cleared is displayed and display

returns to settings menu.

(Cancelling a Base Unit)*

(Registering a Handset to

a Base Unit)*

(Registration):*

ZZVV

ZZSS

(Set Battery Type Ni-MH /

Ni-Cd):

Select the type of battery installed. If

the battery type selected is not the

same as the type of battery installed,

the battery level icons will not be cor-

rect.

ZZVV

ZZSS

to select

nnii--mmhh

(Ni-MH)

nnii--ccdd

(Ni-Cd).

ZZVV

(Set Auto Talk ON/OFF):

If you set Auto Talk to ON, you can

answer the phone by lifting the hand-

set off the base unit.

ZV.

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZV.

auto talk

(Other Options):

ZZVV

ZZSS

(Set Direct Call ON/OFF):

ZZVV

ZZSS

to select

oonn

(On) or

ooffff

(Off).

ZZVV

If ON is selected, Ë is displayed.

(Change Handset PIN):

You can change the 4 digit password

for the handset. The factory preset is

0000.

ZZVV

Enter current handset PIN (4 dig-

its).

Enter new PIN (4 digits). (The new

PIN does not display).

Re-enter the new PIN. (If the PIN

is entered incorrectly, an error tone

sounds and display returns to

new pin ____.

! Once you have programmed the

password, you cannot confirm it. We

recommend you write down the

password. If you forget it, please

consult your nearest Panasonic

Service Centre.

(Select Base Unit)*

For information on registering

handset(s), cancelling and selecting

base unit(s), please refer to ‘For

Optional Multi-Unit Users’.

Before programming, please follow steps 1 to 4 of ‘Handset Settings’.

650bx engversion 19 6 02 19/6/02 6:59 am Page 12

A basic guide to operations & features.

Pull out this Quick Guide for easy reference

Quick G

uide &

Useful Information

Switch handset on / off Z± until a confirmation tone sounds.

Answer a call Z‰.

Make a call Dial the number and Z‰.

Turn Key Lock on/off ZY and hold for more than 2 seconds.

Hang up Z±.

Redial last number Z‰, ZX.

Store a number ZY. ZV enter number, ZY.

Dial a stored number ZÁ. ZS/U to select a number, Z‰.

Dial from the Redial List ZX. ZS/U to select a number, Z‰.

Adjust Receiver volume ZS/U during a call.

Call another handset ZN then the handset number.

Transfer a call ZN enter the handset number, Z±.

Three way call ZN enter the handset number, ZC.

Dial from the Caller ID List ZS/U to select a number, Z‰.

Function Action

650bx engversion 19 6 02 19/6/02 6:59 am Page a

YYoouurr GGuuiiddee ttoo tthhee DDiissppllaayy

Note: The LCD display of the handset can display up to 7 segments and each

character will be displayed as shown in the following table. Some characters will

be displayed in a different way; for example, the character M is displayed n.This

is not a defect of the handset display, it is simply the representation of the char-

acters used in this kind of display.

Display Message Display Meaning

alarm

all clear

auto

auto talk

base

battery low

battery type

bs no

bs pin

call bar

call opt

call waiting

cancel base

clear

cleared

clock

direct no

display opt

edit

edit call no

ext ringer

hs no

hs pin

hs pin change

hot key reg

input code

int ringer

key tone

memory full

new speed

new pin

Alarm

All Clear

Automatic

Automatic Talk

Base

Battery Low

Battery Type

Base Number

Base Unit Pin

Call Bar

Call Option

Call Waiting

Cancel Base

Clear

Cleared

Clock

Direct Number

Display Option

Edit

Edit a Call no.

External Ringer

Handset Number

Handset PIN

Change Handset PIN

Input Code

Internal Ringer

Key Tone

Memory Full

New Speed

New PIN

650bx engversion 19 6 02 19/6/02 6:59 am Page b

Display Message Display Meaning

ni-cd

ni-nh

no item

off

old pin

once

other opt

out of area

paging

phone no

private

range alarm

registration

ringer

ringer off

ringer opt

ringer vol

repeat daily

reset hs

save

saved

save speed

select bs

set alarm

set direct

set time

setting bs

setting hs

standby mode

talk mode

talk time

time alarm

tone opt

verify

vol

yes

Ni-Cd

Ni-MH

No Item

Off

Old Pin

Once

Other Option

Out of Area

Paging

Phone Number

Private

Range Alarm

Registration

Ringer

Ringer Off

Ringer Option

Ringer Volume

Repeat Daily

Reset Handset

Save

Saved

Save Speed

Select Base

Set Alarm

Set Direct

Set Time

Setting Base

Setting Handset

Standby Mode

Talk Mode

Talk Time

Time Alarm

Tone Option

Verify

Volume

Yes

650bx engversion 19 6 02 19/6/02 6:59 am Page c

Location of Controls

Icon Displays Flashes



Within range of a base unit

Intercom mode

Making or answering calls

Less than 30% battery capacity

30% to 50% battery capacity

50% to 100% battery capacity

In Direct Call mode

In Call Prohibition mode

In setting mode

Ringer tone temporarily OFF

Key Lock ON

Speed Dial List/Mode

Out of range

Paging or another unit pages the

handset

Outside call is received

Û - Recharge battery

Ò - Fully charged

Handset controls

# - Receiver

$ - Function/OK Button

% - Talk Off/Power Button

& - Cancel Button

' - Intercom Button

( - Charge Contact

) - Display

* - Speed Dial Button

+ - Talk Button

, - Navigator Key

- - Redial/Pause Button

. - Recall Button

/ - Charge Contact

0 - Microphone

Base unit controls

- Page button

(

)

Handset Display

650bx engversion 19 6 02 19/6/02 6:59 am Page d

Base Unit Settings

You can change the base unit settings using a handset near the base unit.

Before proceeding with any of the base settings listed in this chapter,

the following procedure must initially be carried out:

From the standby mode,

ZZVV

ZZSS

to select

sseettttiinngg bbss

(Setting Base).

ZZVV

iinnppuutt ccooddee

is displayed. From this display, follow the instructions after

each heading.

Please note: Where ‘Enter PIN’ is stated in this chapter, it refers to the 4 digit

Base Unit PIN. (The factory setting is 0000).

To exit the menu at any time,

ZZ±±

Ringer Mode

To select all handsets to

ring

ZZAA

Enter PIN.

ZZAA

ZZVV

To select specific hand-

set(s) to ring

ZZAA

Enter PIN.

ZZBB

ZZAA

to select handset(s).

The selected handsets will be flash-

ing.

ZZVV

To select specific handset(s)

then all handsets to ring

The specific handset(s) will ring for a

selected number of rings. If not answered,

all handsets will ring.

ZZAA

Enter PIN.

ZZCC

ZZAA

to select handset(s)

to ring.

ZZVV

ZZAA

to select number of

rings.

ZZVV

Select Base Unit

Ringer Volume

ZZBB

twice.

ZZKK

(Off) or

select volume.

ZZVV

Select Dialling mode

(Tone/Pulse)

You can change the dialling mode to

tone or pulse depending upon your

network service. If you have a touch

tone service, select tone. If you have

rotary or pulse service, select pulse.

ZZCC

Enter PIN.

ZZAA

for Tone

ZZBB

for Pulse

ZZVV

650bx engversion 19 6 02 19/6/02 6:59 am Page 13

Base Unit Settings

Set the 4 - Digit Base

Unit PIN

Select Pause Timing

Select the Earth or

Flash Mode

Set Call Restriction

An earth relay can be installed as an

option depending on your PBX

requirements (see ‘Additional

Features’). Please consult your near-

est Panasonic Service centre for

installation. On installation, you can

select flash or earth mode to suit

your PBX or network provider.

ZZCC

Enter PIN.

ZZBB

then

for earth mode

ZZBB

then

for flash mode.

If flash is selected and flash times are

required:

ZZAA

for flash 1 (100 msec) or

ZZBB

for flash 2 (600 msec) or

ZZCC

for flash 3 (300 msec)

ZZVV

You can change the 4 - digit password

for the base unit. The factory preset

is 0000.

ZZEE

Enter PIN.

Enter New PIN (4 digits) twice.

You can set the pause timing to 3 or 5

seconds, depending on your PBX

requirements (see “Dialling Pause”).

ZZCC

Enter PIN.

ZZCC

ZZAA

to select 3 seconds

ZZBB

to select 5 seconds.

ZZVV

If entered incorrectly, an error tone

sounds.

If entered correctly, a confirmation

tone sounds.

! Once you have programmed

the password, you cannot con-

firm it. We recommend you

write down the password. If you

forget it, please consult your

nearest Panasonic Service

Centre.

You can restrict selected handset(s)

from dialling selected phone numbers.

You can assign up to 6 call restriction

numbers (up to 8 digits).

ZZFF

Enter PIN.

All registered handset numbers are

displayed.

ZZAA -- FF

to select hand-

set(s) to restrict.

The selected handset(s) will flash.

ZZVV

Enter a restriction number (max.

8 digits).

(If you misdial ZW).

ZZYY

to confirm restriction num-

ber.

To continue entering call restriction

numbers (max. 8 digits), enter the

number, then

ZZYY

On completion,

ZZYY

! If you dial a restricted number,

the call does not connect and

restricted number flashes.

Cancel Call Restricted

Handset(s)

ZZFF

Enter PIN.

ZZAA

to select handset(s)

to cancel.

The selected handset(s) will stop

flashing.

ZZVV

ZZ±±

to return to the standby mode.

Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.

650bx engversion 19 6 02 19/6/02 6:59 am Page 14

Base Unit Settings

Cancel Call Restricted

Numbers

ZZFF

Enter PIN.

ZZVV

ZZWW

to cancel number.

ZZYY

ZZ±±

to return to the standby mode.

Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.

Set the Clock

ZZJJ

Enter a new time (4 digits) (24

hour time) (

ZZKK

ZZYY

! After a mains power failure the

clock needs to be reset.

Reset the Base Unit

You can reset all of the base unit set-

tings to their initial factory settings.

(see “Base Unit Initial Settings”).

ZZKK

Enter PIN.

ZZYY

! If the base unit is reset,

the Caller ID list will

clear.

650bx engversion 19 6 02 19/6/02 6:59 am Page 15

Initial Settings

Handset Initial Settings

Function Initial Setting

Time Alarm Mode

Alarm Time

Handset Ringer Volume

Handset External Ringer Pattern

Handset Internal Ringer Pattern

Handset Paging Tone Pattern

Handset Alarm Tone Pattern

Key Tone

Call Waiting Tone

Range Warning Alarm

Battery Low Alarm

Standby Mode Display

Talk Mode Display

Call Prohibition Mode

Direct Call Mode

Direct Call Number

4 Digit Handset PIN

Auto Talk

Base Unit Access

Handset Receiver Volume

Redial Memory

OFF

Clear

OFF

Base Unit Number

Length of the Call

OFF

Clear

0000

OFF

Automatic Base Unit Access

All Clear

Function Initial Setting

Ringer Mode

Number of Rings

Dialling Mode

Earth/Flash

Flash Timing

Pause Timing

Call Restricted Handset(s)

Call Restriction Number(s)

Base Unit PIN

Base Unit Ringer Volume

All Handsets

Tone

Flash

600m seconds

3 seconds

All Clear

0000

Medium

To reset handset to initial settings refer to “Handset Settings”.

To reset base unit to initial settings refer to “Base Unit Settings”.

Base Unit Initial Settings

650bx engversion 19 6 02 19/6/02 6:59 am Page 16

La pagina sta caricando ...

Panasonic Cordless Telephone KX-TCD650BX Manuale utente

Marca: Panasonic

Modello: Cordless Telephone KX-TCD650BX

Categoria: Telefoni

Tipo: Manuale utente

Questo manuale è adatto anche per

KX-TCD650BX

Scarica il pdf

rapporto

in altre lingue

English: Panasonic Cordless Telephone KX-TCD650BX User manual

Panasonic Cordless Telephone KX-TCD650BX Manuale utente

Questo manuale è adatto anche per

Panasonic Cordless Telephone KX-TCD650BX Manuale utente

in altre lingue

Documenti correlati

Altri documenti