Gigabyte B450 AORUS PRO WIFI Manuale del proprietario

Marca: Gigabyte

Modello: B450 AORUS PRO WIFI

Tipo: Manuale del proprietario

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

B450 AORUS PROB450 AORUS PRO WIFI

B450 AORUS PRO WIFI

B450 AORUS PRO

User's Manual

Rev. 1101

12ME-B45ASPW-1101R

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

B450 AORUS PRO (WIFI) Motherboard Layout ..............................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions .................................................................................... 5

1-2 ProductSpecications ...................................................................................... 6

1-3 Installing the CPU ............................................................................................ 9

1-4 Installing the Memory ....................................................................................... 9

1-5 Installing an Expansion Card ......................................................................... 10

1-6 Back Panel Connectors .................................................................................. 10

1-7 Internal Connectors ........................................................................................ 12

Chapter 2 BIOS Setup ..................................................................................................22

2-1 Startup Screen ............................................................................................... 22

2-2 The Main Menu .............................................................................................. 23

2-3 M.I.T. .............................................................................................................. 24

2-4 System ........................................................................................................... 28

2-5 BIOS ............................................................................................................... 29

2-6 Peripherals ..................................................................................................... 32

2-7 Chipset ........................................................................................................... 34

2-8 Power ............................................................................................................. 36

2-9 Save & Exit ..................................................................................................... 38

Chapter 3 Appendix ......................................................................................................39

3-1 ConguringaRAIDSet .................................................................................. 39

3-2 DriversInstallation .......................................................................................... 41

Regulatory Notices .................................................................................................... 42

Contact Us ................................................................................................................ 48

- 4 -

B450 AORUS PRO (WIFI) Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5B450 AORUS PRO WIFI or B450 AORUS PRO motherboard

5Two SATA cables 5M.2 screw(s)/M.2 standoff(s)

5Motherboard driver disc 5One G Connector

5User's Manual 5One Wi-Fi antenna (Note)

(Note) Only for the B450 AORUS PRO WIFI.

CPU DRAM

VGA BOOT

Socket AM4

AMDB450

R_USB30 CPU_FAN

ATX_12V

ATX

F_AUDIO

AUDIO

B_BIOS

PCIEX4

DDR4_2

DDR4_1

DDR4_4

DDR4_3

BAT

F_PANEL

PCIEX1_2

CLR_CMOS

CODEC

M_BIOS

PCIEX1_1

PCIEX16

SPDIF_O

B450 AORUS PRO (WIFI)

DVI

TYPEC

HDMI

USB30_LAN

SATA3

iTE®

Super I/O

F_USB1

LED_C

SYS_FAN2

TPM

M2A_SOCKET

Intel®

GbE LAN

0 2

1 3

F_USB30

6080

110

CPU_OPT

LED_CPU

M2_WIFI (Note)

SYS_FAN1

6080

M2B_SOCKET

F_USB2SYS_FAN3_PUMPD_LED1

DLED_V_SW1

WIFI Module (Note)

D_LED2

DLED_V_SW2

USB31

ASATA3 1 0

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

componentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Donotplacethecomputersystemonanunevensurface.

•Donotplacethecomputersysteminahigh-temperatureorwetenvironment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

1-2 ProductSpecications

CPU AMD Socket AM4, support for:

- AMD 3rd Generation Ryzen™ processors

- AMD 2nd Generation Ryzen™ processors

- AMD 1st Generation Ryzen™ processors

- AMD 2nd Generation Ryzen™ with Radeon™ Vega Graphics processors

- AMD 1st Generation Ryzen™ with Radeon™ Vega Graphics processors

- AMD Athlon™ with Radeon™ Vega Graphics processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset AMD B450

Memory  4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for DDR4 2933/2667/2400/2133 MHz memory modules

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics (Note 1)

Integrated Graphics Processor:

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz (Note 1)

* Support for HDMI 2.0 version and HDCP 2.2. (Note 1)

- Maximum shared memory of 16 GB

Audio Realtek® ALC1220 codec

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel® GbE LAN chip (1000/100 Mbit)

Wireless

Communication

Module (Note 2)

Intel® Wi-Fi AC 3168

- WIFI 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 4.2

- Support for 11ac wireless standard and up to 433 Mbps data rate

* Actual data rate may vary depending on environment and equipment.

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) (Note 1)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCIEX1_1 and PCIEX1_2 slots. The

PCIEX4 slot operates at up to x2 mode when the PCIEX1_1/PCIEX1_2 slot is

populated. The PCIEX4 slot operates at up to x4 mode when both of the PCIEX1_1

and PCIEX1_2 slots are empty.

1 x PCI Express x16 slot, running at x1 (PCIEX1_2)

(Note 1) Actual support may vary by CPU.

(Note 2) Only for the B450 AORUS PRO WIFI.

- 6 -

Expansion Slots 1 x PCI Express x1 slot (PCIEX1_1)

(The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.)

1 x M.2 Socket 1 connector for a wireless communication module (M2_WIFI) (Note 2)

* Only the B450 AORUS PRO WIFI includes the wireless communication module. (Note 2)

Multi-Graphics

Technology SupportforAMDQuad-GPUCrossFire™and2-WayAMDCrossFire™ technologies

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe

3.0x4/x2SSDsupport)(M2A_SOCKET)

1xM.2 connector(Socket 3,Mkey,type2242/2260/2280 PCIe3.0 x2SSD

support)(M2B_SOCKET)

 6 x SATA 6Gb/s connectors

SupportforRAID0,RAID1,andRAID10

* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

USB Chipset:

- 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support

- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel

- 2 x USB 3.1 Gen 1 ports available through the internal USB header

- 4 x USB 2.0/1.1 ports available through the internal USB headers

CPU:

- 4 x USB 3.1 Gen 1 ports on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

2 x M.2 Socket 3 connectors

6 x SATA 6Gb/s connectors

1 x CPU fan header

1 x water cooling CPU fan header

2 x system fan headers

1 x system fan/water cooling pump header

1xCPUcoolerLEDstrip/RGBLEDstripheader

2xaddressableLEDstripheaders

2xaddressableLEDstrippowerselectjumpers

1xRGB(RGBW)LEDstripheader

1 x front panel header

1 x front panel audio header

1xS/PDIFOutheader

1 x USB 3.1 Gen 1 header

2 x USB 2.0/1.1 headers

 1 x Trusted Platform Module (TPM) header (2x10 pin, for the GC-TPM2.0 module

only)

1 x Clear CMOS jumper

Back Panel

Connectors

1xHDMIport

2 x SMA antenna connectors (1T1R) (Note)

1xDVI-Dport

4 x USB 3.1 Gen 1 ports

1 x USB Type-C™ port, with USB 3.1 Gen 2 support

1 x USB 3.1 Gen 2 Type-A port (red)

1 x RJ-45 port

1xopticalS/PDIFOutconnector

 5 x audio jacks

(Note) Only for the B450 AORUS PRO WIFI.

- 7 -

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Water cooling ow rate detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan (pump) speed control function is supported will depend on the fan

(pump) you install.

BIOS 2x128Mbitash

Use of licensed AMI UEFI BIOS

SupportforDualBIOS™

PnP1.0a,DMI2.7,WfM2.0,SMBIOS2.7,ACPI5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

- @BIOS

- EasyTune

- Fast Boot

- Game Boost

- ON/OFF Charge

- RGB Fusion

- Smart Backup

- System Information Viewer

SupportforQ-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

cFosSpeed

Operating

System Support for Windows 10 64-bit

Form Factor ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Please visit GIGABYTE's website for support lists of CPU, memory

modules,SSDs,andM.2devices.

Please visit the Support\Utility List page on GIGABYTE's website to download the latest

version of apps.

B450 AORUS PROB450 AORUS PRO WIFI

- 8 -

1-3 Installing the CPU

Please visit GIGABYTE's website for details on hardware installation.

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

Dual Channel Memory Conguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

Channel A: DDR4_2, DDR4_4

Channel B: DDR4_1, DDR4_3

Installing the CPU

Completely lift up the CPU socket locking lever. Locate the pin one (denoted by a small triangle) of the CPU

socket and the CPU. Once the CPU is positioned into its socket, place one nger down on the middle of the

CPU, lowering the locking lever and latching it into the fully locked position.

AM4 Socket

A Small Triangle

Marking Denotes Pin

One of the Socket AM4 CPU

A Small Triangle

Marking Denotes CPU

Pin One

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

Completely lift up the

CPU socket locking lever

Do not force the CPU into the CPU socket before the CPU socket locking lever is lifted up, or

damage to the CPU and CPU socket may occur.

- 9 -

1-5 InstallinganExpansionCard

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

USB 3.1 Gen 1 Port

TheUSB3.1Gen1portsupportstheUSB3.1Gen1specicationandiscompatibletotheUSB2.0

specication.UsethisportforUSBdevices.

HDMI Port

TheHDMIportsupportsHDCP2.2(Note 2)andDolbyTrueHDandDTSHDMaster

Audioformats.Italsosupportsupto192KHz/24bit8-channelLPCMaudiooutput.

YoucanusethisporttoconnectyourHDMI-supportedmonitor.Themaximumsupportedresolutionis

4096x2160@60Hz(Note 2), but the actual resolutions supported are dependent on the monitor being used.

SMA Antenna Connectors (1T1R) (Note 1)

Use this connector to connect an antenna.

(Note 1) Only for the B450 AORUS PRO WIFI.

(Note 2) Actual support may vary by CPU.

(Note3) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

AfterinstallingtheHDMIdevice,makesuretosetthedefaultsoundplaybackdevicetoHDMI.(The

item name may differ depending on your operating system.)

DuetoCPUlimitations,readthefollowingguidelinesbeforeinstallingthememoryinDualChannelmode.

1. DualChannelmodecannotbeenabledifonlyonememorymoduleisinstalled.

2. WhenenablingDualChannelmodewithtwoorfourmemorymodules,itisrecommendedthatmemory

of the same capacity, brand, speed, and chips be used.

(Note 1)

Tighten the antenna cables to the antenna connectors and then move the antenna to a place

where the signal is good.

DVI-D Port (Note 3)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920x1200@60Hz

(theactualresolutionssupporteddependonthemonitorbeingused).ConnectamonitorthatsupportsDVI-D

connection to this port.

USB 3.1 Gen 2 Type-A Port (Red)

TheUSB3.1Gen2Type-AportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB

3.1Gen1andUSB2.0specication.UsethisportforUSBdevices.

RecommandedDualChannelMemoryConguration:

DDR4_4 DDR4_2 DDR4_3 DDR4_1

2 Modules - - DS/SS - - DS/SS

4 Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

- 10 -

USB Type-C™ Port

ThereversibleUSBportsupportstheUSB3.1Gen2specicationandiscompatibletotheUSB3.1Gen1

andUSB2.0specication.UsethisportforUSBdevices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describesthestatesoftheLANportLEDs.

Center/SubwooferSpeakerOut(Orange)

Use this audio jack to connect center/subwoofer speakers.

Rear Speaker Out (Black)

This jack can be used to connect rear speakers.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In/Rear Speaker Out (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out (Green)

The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended

that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).

Mic In/Side Speaker Out (Pink)

The Mic in jack.

ActivityLED

Connection/

SpeedLED

LAN Port

ActivityLED:

Connection/SpeedLED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Datatransmissionorreceivingisoccurring

On No data transmission or receiving is occurring

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•Whenremovingthecable,pullitstraightoutfromtheconnector.Donotrockitsidetosideto

prevent an electrical short inside the cable connector.

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Center/Subwoofer Speaker Out a a

Rear Speaker Out aaa

Line In/Side Speaker Out a

Line Out/Front Speaker Out aaaa

Mic In/Side Speaker Out a

•ToenableorconguretheaudioamplifyingfunctionfortheLineoutjack,pleaseaccesstheHD

Audio Manager application.

•Please visit GIGABYTE's website

for more audio software information.

PleasevisitGIGABYTE'swebsitefordetailsonconguringtheaudiosoftware.

- 11 -

1-7 Internal Connectors

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

156

16 19

9 8

1) ATX_12V

2) ATX

3) CPU_FAN

4) SYS_FAN1/2

5) CPU_OPT

6) SYS_FAN3_PUMP

7) LED_CPU

8) LED_C

9) D_LED1/D_LED2

10) DLED_V_SW1/DLED_V_SW2

11) ASATA3 0/1

12) SATA3 0/1/2/3

13) M2A_SOCKET/M2B_SOCKET

14) SPDIF_O

15) F_PANEL

16) F_AUDIO

17) BAT

18) CLR_CMOS

19) F_USB30

20) F_USB1/F_USB2

21) TPM

22) CPU/DRAM/VGA/BOOT

- 12 -

DEBUG

PORT

G.QBOFM

131

2412

ATX

1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5GND 17 GND

6 +5V 18 GND

7GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2x12-pin

ATX)

23 +5V (Only for 2x12-pin ATX)

12 3.3V (Only for 2x12-pin

ATX)

24 GND(Onlyfor2x12-pinATX)

ATX_12V:

Pin No. Denition Pin No. Denition

1GND(Onlyfor2x4-pin12V) 5 +12V (Only for 2x4-pin 12V)

2GND(Onlyfor2x4-pin12V) 6 +12V (Only for 2x4-pin 12V)

3GND 7 +12V

4GND 8 +12V

DEBUG

PORT

G.QBOFM

ATX_12V

3/4) CPU_FAN/SYS_FAN1/2 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

CPU_FAN

SYS_FAN2

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

1Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

SYS_FAN1

DEBUG

PORT

G.QBOFM

- 13 -

6) SYS_FAN3_PUMP(SystemFan/WaterCoolingPumpHeader)

The fan/pump header is 4-pin and possess a foolproof insertion design. Most fan headers possess a

foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation

(the black connector wire is the ground wire). The speed control function requires the use of a fan with

fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed

inside the chassis. The header also provides speed control for a water cooling pump, refer to Chapter 2,

"BIOS Setup," "M.I.T.," for more information.

DEBUG

PORT

G.QBOFM

5) CPU_OPT(WaterCoolingCPUFanHeader)

The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof

insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black

connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control

design.

DEBUG

PORT

G.QBOFM

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

Pin No. Denition

1 12V

2 G

3 R

4 B

DEBUG

PORT

G.QBOFM

7) LED_CPU(CPUCoolerLEDStrip/RGBLEDStripHeader)

 TheheadercanbeusedtoconnectaCPUcoolerLEDstriporastandard5050RGBLEDstrip(12V/G/R/B),

with maximum power rating of 2A (12V) and maximum length of 2m.

ConnecttheCPUcoolerLEDstrip/RGBLEDstriptotheheader.The

powerpin(markedwithatriangleontheplug)oftheLEDstripmust

be connected to Pin 1 of this header. Incorrect connection may lead

tothedamageoftheLEDstrip.

LEDStrip

12V

- 14 -

9) D_LED1/D_LED2(AddressableLEDStripHeaders)

 Theheaderscanbeusedtoconnectastandard5050addressableLEDstrip,withmaximumpowerrating

of2A(12Vor5V)andmaximumlengthof5mormaximumnumberof300LEDs.Thereare12Vand5V

addressableLEDstrips.BesuretoverifythevoltagerequirementsofyouraddressableLEDstripandset

theDLED_V_SW1andDLED_V_SW2jumpersaccordingly.

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

Forhowtoturnon/offthelightsoftheLEDstrip,refertotheinstructionsoninChapter2,"BIOS

Setup," "Peripherals."

D_LED1 D_LED2

ConnectyouraddressableLEDstriptotheheader.Thereare12Vand

5VaddressableLEDstrips.Besuretoverifythevoltagerequirements

ofyouraddressable LEDstrip and setthe DLED_V_SW1and

DLED_V_SW2jumpersaccordingly.The powerpin(marked witha

triangleontheplug)oftheLEDstripmustbeconnectedtoPin1ofthe

addressableLEDstripheader.Incorrectconnectionmayleadtothe

damageoftheLEDstrip.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

USB0_B

B_ F_USB3





_



_3U

8) LED_C(RGB(RGBW)LEDStripHeader)

 Theheadercanbeusedtoconnectastandard5050RGB(RGBW)LEDstrip(12V/G/R/B/W),withmaximum

power rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

5 W

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_

USB0_B

B_ F_USB3





_

ConnectyourRGB(RGBW)LEDstriptotheheader.Thepowerpin

(markedwithatriangleontheplug)oftheLEDstripmustbeconnected

to Pin 1 (12V) of this header. Incorrect connection may lead to the

damageoftheLEDstrip.

RGBW

LEDStrip

12V

RGB

LEDStrip

12V

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

USB0_B

B_ F_USB3





_



_3U

Addressable

LEDStrip

Pin No. Denition

1 V

2Data

3 No Pin

4GND

- 15 -

10) DLED_V_SW1/DLED_V_SW2(AddressableLEDStripPowerSelectJumpers)

 ThejumpersallowyoutoselectthesupplyvoltageoftheD_LED1andD_LED2headers.Besuretoverify

thevoltagerequirementsofyouraddressableLEDstripandsetthecorrectvoltagewiththisjumperbefore

connection.IncorrectconnectionmayleadtothedamageoftheLEDstrip.

1-2:5V(Default) 1-2:5V(Default)

2-3: 12V 2-3: 12V

DLED_V_SW1

DLED_V_SW2

11/12) ASATA3 0/1, SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and

SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors

supportRAID0,RAID1,andRAID10.RefertoChapter3,"ConguringaRAIDSet,"forinstructions

onconguringaRAIDarray.

Pin No. Denition

1GND

2 TXP

3 TXN

4GND

5 RXN

6 RXP

7GND

SATA3

0 2

1 3 7

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

7 1

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

ASATA3 0

- 16 -

13) M2A_SOCKET/M2B_SOCKET(M.2Socket3Connectors)

 TheM.2connectorssupportM.2SATASSDsorM.2PCIeSSDs(Note)andsupportRAIDconguration.

PleasenotethatanM.2PCIeSSDcannotbeusedtocreateaRAIDseteitherwithanM.2SATASSDora

SATAharddrive.TocreateaRAIDarraywithanM.2PCIeSSD,youmustsetupthecongurationinUEFI

BIOSmode.RefertoChapter3,"ConguringaRAIDSet,"forinstructionsonconguringaRAIDarray.

SelecttheproperholefortheM.2SSDtobeinstalledandrefastenthescrewandstandoff.

Installation Notices for the M.2 and SATA Connectors:

DuetothelimitednumberoflanesprovidedbytheChipset,theavailabilityoftheSATAconnectorsmay

be affected by the type of device installed in the M.2 connectors. Refer to the following table for details.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

USB0_B

B_ F_USB3

 F_USB303



_



_3U

80110 60 42

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

USB0_B

B_ F_USB3

 F_USB303



_



_3U

80 60 42

M2A_SOCKET

M2B_SOCKET

•M2B_SOCKET:

SATA3 0 SATA3 1 SATA3 2 SATA3 3 ASATA3 0 ASATA3 1

M.2PCIex2SSD*

a a r r a a

NoM.2SSDInstalled aaaaaa

a: Available, r: Not available

* TheM2B_SOCKETconnectorsupportsuptoPCIex2SSDs.

Connector

Type of

M.2SSD

•M2A_SOCKET:

SATA3 0 SATA3 1 SATA3 2 SATA3 3 ASATA3 0 ASATA3 1

M.2SATASSD aaaar r

M.2PCIeSSD

aaaar r

NoM.2SSDInstalled aaaaaa

a: Available, r: Not available

Connector

Type of

M.2SSD

(Note) TheM2B_SOCKETconnectorsupportsonlyPCIeSSDs.

FollowthestepsbelowtocorrectlyinstallanM.2SSDintheM.2connector.

Step 1:

Get a screw and a standoff from the included M.2 screw kit. Locate the M.2 connector where you will install

theM.2SSD,useascrewdrivertounfastenthescrewontheheatsinkandthenremovetheheatsink.

Step 2:

LocatethepropermountingholefortheM.2SSDtobeinstalledandthentightenthestandoffrst.Insert

theM.2SSDintotheM.2connectoratanangle.

Step 3:

PresstheM.2SSDdownandthensecureitwiththescrew.Replacetheheatsinkandsecureittothe

original hole.

- 17 -

14) SPDIF_O (S/PDIF Out Header)

 ThisheadersupportsdigitalS/PDIFOutandconnectsaS/PDIFdigitalaudiocable(providedbyexpansion

cards) for digital audio output from your motherboard to certain expansion cards like graphics cards and

soundcards.Forexample,somegraphicscardsmayrequireyoutouseaS/PDIFdigitalaudiocablefor

digitalaudiooutputfromyourmotherboardtoyourgraphicscardifyouwishtoconnectanHDMIdisplay

tothegraphicscardandhavedigitalaudiooutputfromtheHDMIdisplayatthesametime.Forinformation

aboutconnectingtheS/PDIFdigitalaudiocable,carefullyreadthemanualforyourexpansioncard.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_ SF_

USB0_B

B_ F_USB3





_



_3U

Pin No. Denition

15VDUAL

2 No Pin

3SPDIFO

4GND

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

resetswitch,powerLED,harddriveactivityLED,speakerandetc.Whenconnectingyourchassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

15) F_PANEL(FrontPanelHeader)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

System Status LED

S0 On

S3/S4/S5 Off

•PW (Power Switch, Red):

Connects to the power switch on the chassis front panel. You may

congurethewaytoturnoffyoursystemusingthepowerswitch(refer

to Chapter 2, "BIOS Setup," "Power," for more information).

•SPEAK (Speaker, Orange):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (PowerLED,Yellow/Purple):

Connects to the power status indicator

onthechassisfrontpanel.TheLEDison

whenthesystemisoperating.TheLEDis

off when the system is in S3/S4 sleep state

or powered off (S5).

•HD (HardDriveActivityLED,Blue):

 ConnectstotheharddriveactivityLEDonthechassisfrontpanel.TheLEDisonwhentheharddrive

is reading or writing data.

•RES (Reset Switch, Green):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

ifthecomputerfreezesandfailstoperformanormalrestart.

•CI (Chassis Intrusion Header, Gray):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC (Orange): No Connection.

PowerLED

DEBUG

PORT

G.QBOFM

CI-

CI+

PWR_LED-

PWR_LED+

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

PowerLED

HD-

RES+

HD+

RES-

HardDrive

ActivityLED

Reset

Switch Chassis Intrusion

Header

Power Switch Speaker

PWR_LED-

- 18 -

17) BAT (Battery)

 Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a

metal object like a screwdriver to touch the positive and negative terminals of the battery

holder, making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replacethebatterywithanequivalentone.Damagetoyourdevicesmayoccurifthebatteryis

replaced with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

16) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsHighDenitionaudio(HD).Youmayconnectyourchassisfront

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

Some chassis provide a front panel audio module that has separated connectors on each wire instead

of a single plug. For information about connecting the front panel audio module that has different wire

assignments, please contact the chassis manufacturer.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_

USB0_B

B_ F_USB3





_

9 1

10 2

Pin No. Denition Pin No. Denition

1 MIC2_L 6 Sense

2GND 7FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

- 19 -

20) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

 TheheadersconformtoUSB2.0/1.1specication.EachUSBheadercanprovidetwoUSBportsviaan

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 Power (5V) 6 USBDY+

2 Power (5V) 7 GND

3USBDX- 8GND

4USBDY- 9 No Pin

5USBDX+ 10 NC

•DonotplugtheIEEE1394bracket(2x5-pin)cableintotheUSB2.0/1.1header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord

from the power outlet to prevent damage to the USB bracket.

DEBUG

PORT

G.QBOFM

Pin No. Denition Pin No. Denition

1 VBUS 11 D2+

2 SSRX1- 12 D2-

3 SSRX1+ 13 GND

4GND 14 SSTX2+

5 SSTX1- 15 SSTX2-

6 SSTX1+ 16 GND

7GND 17 SSRX2+

8D1- 18 SSRX2-

9D1+ 19 VBUS

10 NC 20 No Pin

19) F_USB30 (USB 3.1 Gen 1 Header)

The header conforms to USB 3.1 Gen 1 and USB 2.0 specication and can provide two USB ports. For

purchasing the optional 3.5" front panel that provides two USB 3.1 Gen 1 ports, please contact the local

dealer.

F_USB30 F_U

B_ 

F_  F_ 



_

B

BS_

B

SB_

B

_S



S_

_

B

_U

_

B





 

S  

 

123

 

123

 

123

 

123

BSS

S

_S 

SSU

 

1 2 3  

 S3 BSSS



U

 __ 3

F_USB3F

S  _

SF





B_

F

_0

S

S

_0F

_F

_

_

__B





U

S  _S

_

USB0_B

B_ F_USB3



18) CLR_CMOS (Clear CMOS Jumper)

 UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer and unplug the power cord from the power outlet before clearing

the CMOS values.

•Aftersystemrestart,gotoBIOSSetuptoloadfactorydefaults(selectLoadOptimizedDefaults)or

manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).

Open: Normal

Short: Clear CMOS Values

- 20 -

La pagina si sta caricando...

Gigabyte B450 AORUS PRO WIFI Manuale del proprietario

Marca: Gigabyte

Modello: B450 AORUS PRO WIFI

Tipo: Manuale del proprietario

Scarica PDF

rapporto

in altre lingue

English: Gigabyte B450 AORUS PRO WIFI Owner's manual

Documenti correlati

Altri documenti

Asus TUF B450-PRO GAMING Motherboards Manuale utente