Ubiquiti ER-8-XG Guida utente

Marca: Ubiquiti

Modello: ER-8-XG

Categoria: Convertitori multimediali di rete

Tipo: Guida utente

8-Port 10G SFP+ Router

Model: ER-8-XG

Introduction

Thank you for purchasing the Ubiquiti Networks®

EdgeRouter™Infinity. This Quick Start Guide is designed

to guide you through installation and also includes

warrantyterms.

Package Contents

EdgeRouter Infinity

Mounting Brackets

(Qty. 2)

Bracket Screws

(Qty. 8)

Mounting Screws

(Qty. 4)

Cage Nuts

(Qty. 4)

Power Cords

(Qty. 2)

Rubber Feet

(Qty. 4)

installer’s responsibility to follow local country regulations, including operation within legal

frequency channels, output power, indoor cabling requirements, and Dynamic Frequency

Selection (DFS) requirements.

Installation Requirements

• Phillips screwdriver (for rack- or wall-mounting)

• Standard-sized, 19" wide rack with a minimum of 1U height

available (for rack-mounting)

• For indoor applications, use Category 5 (or above) UTP

cabling approved for indoor use.

• For outdoor applications, shielded Category 5 (or above)

cabling should be used for all wired Ethernet connections

and should be grounded through the AC ground of the

power supply.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit:

www.ubnt.com/toughcable

WARNING: To reduce the risk of fire or electric

shock, do not expose the EdgeRouter Infinity to rain

ormoisture.

Note: Although the cabling can be located outdoors,

the EdgeRouter Infinity itself should be housed inside

a protective enclosure.

Hardware Overview

Front Panel Ports

Console SFP+

(eth1-eth8)

RJ45

(eth0)

USB

microSD

Interface Description

Console

RJ45 serial console port for Command

Line Interface (CLI) management. Use an

RJ45-to-DB9, serial console cable, also

known as a rollover cable, to connect the

Console port to your computer. (If your

computer does not have a DB9 port, then

you will also need a DB9 adapter.) Then

configure the following settings as needed:

• Baud rate 115200

• Data bits 8

• Parity NONE

• Stop bits 1

• Flow control NONE

SFP+

(eth1-eth8)

Hot-swappable SFP+ ports support

10Gbps connections.

RJ45

(eth0)

RJ45 port supports 10/100/1000 Ethernet

connections.

microSD Reserved for future use.

USB Reserved for future use.

Front Panel Button

Reset

Button Description

Reset

There are two methods to reset the

EdgeRouter Infinity to factory defaults:

• Runtime reset (recommended) The

EdgeRouter Infinity should be running

after bootup is complete. Press and hold

the Reset button for about 10seconds

until the LED of port eth0 starts flashing

and then becomes solidly lit. After a few

seconds, the LED will turn off, and the

EdgeRouter Infinity will automatically

reboot.

Note: To press the Reset button,

insert a straightened paper clip (or

similar object) into the hole shown

above. Do not use an object that

can break and become lodged in

the hole.

• Power-on reset Disconnect the Power

Cords from the EdgeRouter Infinity.

Press and hold the Reset button while

connecting the Power Cords to the

EdgeRouter Infinity. The port LEDs will

light up in sequential order. Keep holding

the Reset button until the LED on the

last port starts flashing, and then release

the button.

Front Panel LEDs

SFP+:

Link/Act

RJ45:

Link/Act

System

LED State Status

System

White EdgeRouter Infinity is

powered on.

SFP+ (eth1-8)

Link/Act

Off No Link

White Link Established

White Flashing Link Activity

RJ45 (eth0)

Link/Act

Off No Link

Green Link Established

Green Flashing Link Activity

Back Panel

PSU Power Ports

Fans

Note: There are ventilation holes on the sides of the

EdgeRouter Infinity.

Hardware Installation

The EdgeRouter Infinity can be placed on a horizontal surface,

mounted on a wall, or mounted in a rack.

WARNING: FAILURE TO PROVIDE PROPER VENTILATION

MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF

CLEARANCE NEXT TO THE VENTILATION HOLES FOR

ADEQUATE AIRFLOW.

1. Attach the Mounting Brackets to the EdgeRouter Infinity

using the eight Bracket Screws.

2. Attach the EdgeRouter Infinity to the rack using the four

Mounting Screws. (If the rack has square slots, then use the

Cage Nuts with the Mounting Screws.)

3. Connect the Power Cord to one PSU Power Port.

4. Connect the other end of the Power Cord to a power outlet.

5. Repeat steps 3-4 to connect power to the second

PSUPower Port.

Connecting SFP+

1. Remove the protective plug covering the SFP+ port.

2. Plug a compatible fiber module into the SFP+ port.

1000Mbps SM/SC 20KM DDM

Tx1550nm/Rx1310nm

3. Connect the fiber optic cable to the fiber module. Then

connect the other end of the cable to another fiber device.

4. Repeat steps 1-3 to connect additional SFP+ ports.

Note: Use compatible fiber SFP+ modules with the

appropriate fiber optic cabling. For information about

compatible fiber SFP+ modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the EdgeOS Configuration Interface

The EdgeOS® configuration interface can be accessed via

DHCP or static IP address assignment. By default, eth1 is set

up as a DHCP client, while eth0 is assigned a static IP address

of 192.168.1.1. To configure the EdgeRouter, proceed to the

appropriate section: DHCP or “Static IP Address”.

DHCP

1. Connect a cable from eth1 on the EdgeRouter to a LAN

segment that has an existing DHCP server.

2. To check the IP address of the EdgeRouter, use one of the

following methods:

• Set up the DHCP server to provide a specific IP address

to the EdgeRouter based on its MAC address (on the

label).

• Let the EdgeRouter obtain an IP address and then check

the DHCP server to see which IP address was assigned.

3. Launch your web browser. Enter the appropriate IP address

in the address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License

Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you

to customize your settings as needed. For more information,

refer to the EdgeOS User Guide, which is available at

www.ubnt.com/download/edgemax

You can also manage your device using the Ubiquiti® Network

Management System. UNMS™ lets you configure, monitor,

upgrade, and back up your devices using a single application.

Get started at www.unms.com

Static IP Address

1. Connect an Ethernet cable from the Ethernet port of your

computer to the port labeled eth0 on the EdgeRouter.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.1 in the

address field. Press enter (PC) or return (Mac).

https://192.168.1.1

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License

Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you

to customize your settings as needed. For more information,

refer to the EdgeOS User Guide, which is available at

www.ubnt.com/download/edgemax

You can also manage your device using the Ubiquiti Network

Management System. UNMS lets you configure, monitor,

upgrade, and back up your devices using a single application.

Get started at www.unms.com

Specifications

ER-8-XG

Dimensions 442.4 x 285.6 x 43.7 mm

(17.42 x 11.24 x 1.72")

Weight

Without Mount

With Mount

4.950 kg (10.91 lb)

5.045 kg (11.12 lb)

Max. Power Consumption 100W

Power Method 110 - 240VAC

Power Supply (2) Hotswappable AC/DC PSU

Supported Voltage Range AC Input: 100 to 240VAC

Button Reset

Processor MIPS64 16 Core 1.8 GHz

System Memory 16 GB DDR4 RAM

On-Board Flash Storage 8 MB NOR Flash

4 GB eMMC NAND Flash

LEDs

System

SFP+ Data Ports

RJ45 Data Port

Status

Link/Activity

Interfaces

Serial Console Port

Data Ports

(1) RJ45 Serial Port

(8) SFP+ Ports

(1) RJ45 Gigabit Ethernet Port

Mounting Rack

ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV

Operating Temperature -5 to 40° C (23 to 104° F)

Operating Humidity 5 - 95% Noncondensing

Certications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.

2. Heed all warnings.

3. Only use attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may

cause fire hazard. Keep at least 20 mm of clearance next

to the ventilation holes for adequate airflow.

WARNING: To reduce the risk of fire or electric shock, do

not expose this product to rain or moisture.

WARNING: Do not use this product in location that can

be submerged by water.

WARNING: Avoid using this product during an electrical

storm. There may be a remote risk of electric shock from

lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a

different power source than those specified may result in improper

operation, damage to the equipment or pose a fire hazard if the

limitations are not followed.

2. There are no operator serviceable parts inside this equipment. Service

should be provided only by a qualified service technician.

3. This equipment is provided with a detachable power cord which has

an integral safety ground wire intended for connection to a grounded

safety outlet.

a. Do not substitute the power cord with one that is not the provided

approved type. Never use an adapter plug to connect to a 2-wire

outlet as this will defeat the continuity of the grounding wire.

b. The equipment requires the use of the ground wire as a part of the

safety certification, modification or misuse can provide a shock

hazard that can result in serious injury or death.

c. Contact a qualified electrician or the manufacturer if there

are questions about the installation prior to connecting the

equipment.

d. Protective earthing is provided by Listed AC adapter. Building

installation shall provide appropriate short-circuit backup

protection.

e. Protective bonding must be installed in accordance with local

national wiring rules and regulations.

Limited Warranty

www.ubnt.com/support/warranty/

The limited warranty requires the use of arbitration to resolve disputes on

an individual basis, and, where applicable, specify arbitration instead of

jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operations of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian CAN ICES-003.

CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

Australia and New Zealand

Warning: This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may

be required to take adequate measures.

CE Marking

CE marking on this product represents the product is in compliance with all

directives that are applicable to it.

RoHS/WEEE Compliance Statement

English

European Directive 2012/19/EU requires that the equipment bearing

this symbol on the product and/or its packaging must not be disposed

of with unsorted municipal waste. The symbol indicates that this

product should be disposed of separately from regular household waste

streams. It is your responsibility to dispose of this and other electric and

electronic equipment via designated collection facilities appointed by the

government or local authorities. Correct disposal and recycling will help

prevent potential negative consequences to the environment and human

health. For more detailed information about the disposal of your old

equipment, please contact your local authorities, waste disposal service, or

the shop where you purchased the product.

Deutsch

Die Europäische Richtlinie 2012/19/EU verlangt, dass technische

Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem

Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall

entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt

von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es

liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische

und elektronische Geräte über die dafür zuständigen und von der

Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu

entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,

potentielle negative Folgen für Umwelt und die menschliche Gesundheit

zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer

Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder

städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das

Produkt erworben haben.

Español

La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en

el propio aparato y/o en su embalaje no deben eliminarse junto con otros

residuos urbanos no seleccionados. El símbolo indica que el producto

en cuestión debe separarse de los residuos domésticos convencionales

con vistas a su eliminación. Es responsabilidad suya desechar este y

cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos

de recogida que ponen a su disposición el gobierno y las autoridades

locales. Al desechar y reciclar correctamente estos aparatos estará

contribuyendo a evitar posibles consecuencias negativas para el medio

ambiente y la salud de las personas. Si desea obtener información más

detallada sobre la eliminación segura de su aparato usado, consulte a las

autoridades locales, al servicio de recogida y eliminación de residuos de su

zona o pregunte en la tienda donde adquirió el producto.

Français

La directive européenne 2012/19/UE exige que l’équipement sur lequel

est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté

avec les autres ordures ménagères. Ce symbole indique que le produit

doit être éliminé dans un circuit distinct de celui pour les déchets des

ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout

autre matériel électrique ou électronique par les moyens de collecte

indiqués par le gouvernement et les pouvoirs publics des collectivités

territoriales. L’élimination et le recyclage en bonne et due forme ont pour

but de lutter contre l’impact néfaste potentiel de ce type de produits

sur l’environnement et la santé publique. Pour plus d’informations sur le

mode d’élimination de votre ancien équipement, veuillez prendre contact

avec les pouvoirs publics locaux, le service de traitement des déchets, ou

l’endroit où vous avez acheté le produit.

Italiano

La direttiva europea 2012/19/UE richiede che le apparecchiature

contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non

siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica

che questo prodotto non deve essere smaltito insieme ai normali rifiuti

domestici. È responsabilità del proprietario smaltire sia questi prodotti sia

le altre apparecchiature elettriche ed elettroniche mediante le specifiche

strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il

corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze

potenzialmente negative per l’ambiente e per la salute dell’essere umano.

Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie

apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti

pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel

quale avete acquistato il prodotto.

Declaration of Conformity

български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че това устройство

ER-8-XG е в съответствие със съществените изисквания и други приложими разпоредби на

Директиви 2014/30/ЕС, 2014/35/ЕС. Цялостният текст на ЕС декларацията за съответствие

може да се намери на следния интернет адрес:

www.ubnt.com/compliance

Hrvatski [Croatian] UBIQUITI NETWORKS ovim putem izjavljuje da je ovaj uređaj ER-8-XG

sukladan osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/30/EU,

2014/35/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi:

www.ubnt.com/compliance

Čeština [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto ER-8-XG zařízení, je ve

shodě se základními požadavky a dalšími příslušnými ustanoveními směrnic 2014/30/EU,

2014/35/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:

www.ubnt.com/compliance

Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne ER-8-XG enhed,

er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver

2014/30/EU, 2014/35/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på følgende

internetadresse:

www.ubnt.com/compliance

Nederlands [Dutch] Hierbij verklaart UBIQUITI NETWORKS, dat deze ER-8-XG apparaat, in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijnen

2014/30/EU, 2014/35/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden

geraadpleegd op het volgende internetadres:

www.ubnt.com/compliance

English

Hereby, UBIQUITI NETWORKS, declares that this ER-8-XG device, is in compliance with

the essential requirements and other relevant provisions of Directives

2014/30/EU, 2014/35/EU

The full text of the EU declaration of conformity is available at the following internet address:

www.ubnt.com/compliance

Eesti keel [Estonian] Käesolevaga UBIQUITI NETWORKS kinnitab, et antud ER-8-XG seade,

on vastavus olulistele nõuetele ja teistele asjakohastele sätetele direktiivide 2014/30/EL,

2014/35/EL. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:

www.ubnt.com/compliance

Suomi [Finnish] Täten UBIQUITI NETWORKS vakuuttaa, että tämä ER-8-XG laite, on

yhdenmukainen olennaisten vaatimusten ja muiden sitä koskevien direktiivien 2014/30/EU,

2014/35/EU. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla

seuraavassa internetosoitteessa:

www.ubnt.com/compliance

Français [French] Par la présente UBIQUITI NETWORKS déclare que l’appareil ER-8-XG, est

conforme aux exigences essentielles et aux autres dispositions pertinentes des directives

2014/30/UE, 2014/35/UE. Le texte complet de la déclaration UE de conformité est disponible à

l’adresse internet suivante:

www.ubnt.com/compliance

Deutsch [German] Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses ER-8-XG

Gerät, in Übereinstimmung mit den grundlegenden Anforderungen und den anderen

relevanten Vorschriften der Richtlinien 2014/30/EU, 2014/35/EU befindet. Der vollständige

Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:

www.ubnt.com/compliance

Ελληνικά [Greek] Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή ER-8-XG,

είναι σε συμμόρφωση με τις βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις των οδηγιών

2014/30/EE, 2014/35/EE. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην

ακόλουθη ιστοσελίδα στο διαδίκτυο:

www.ubnt.com/compliance

Magyar [Hungarian] Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a ER-8-XG készülék

megfelel az alapvető követelményeknek és más vonatkozó 2014/30/EU, 2014/35/EU irányelvek

rendelkezéseit. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes

címen:

www.ubnt.com/compliance

Íslenska [Icelandic] Hér, UBIQUITI NETWORKS, því yfir að þetta ER-8-XG tæki er í samræmi við

grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/30/ESB, 2014/35/ESB. Fullur texti ESB

samræmisyfirlýsing er að finna á eftirfarandi netfangi:

www.ubnt.com/compliance

Italiano [Italian] Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo ER-8-XG,

è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/30/UE,

2014/35/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente

indirizzo Internet:

www.ubnt.com/compliance

Latviešu valoda [Latvian] Ar šo, UBIQUITI NETWORKS, deklarē, ka ER-8-XG ierīce, ir saskaņā ar

būtiskajām prasībām un citiem attiecīgiem noteikumiem Direktīvās 2014/30/ES, 2014/35/ES. Pilns

ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:

www.ubnt.com/compliance

Lietuvių kalba [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis ER-8-XG įrenginys atitinka

esminius reikalavimus ir kitas 2014/30/ES, 2014/35/ES Direktyvų nuostatas. Visas ES atitikties

deklaracijos tekstas prieinamas šiuo interneto adresu:

www.ubnt.com/compliance

Malti [Maltese]

Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz ER-8-XG huwa konformi

mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttivi 2014/30/UE, 2014/35/UE.

Id-dikjarazzjoni tal-konformità tista’ tiġi kkonsultata minn www.ubnt.com/compliance

Norsk [Norwegian]

Herved UBIQUITI NETWORKS, erklærer at denne ER-8-XG enheten, er

i samsvar med de grunnleggende kravene og andre relevante bestemmelser i direktivene

2014/30/EU, 2014/35/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på

følgende internettadresse: www.ubnt.com/compliance

Polski [Polish] Niniejszym, Ubiquiti Networks, oświadcza, że urządzenie ER-8-XG, jest zgodny

z zasadniczymi wymaganiami oraz pozostałymi stosownymi postanowieniami Dyrektyw

2014/30/UE, 2014/35/UE

. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym

adresem internetowym:

www.ubnt.com/compliance

Português [Portuguese] UBIQUITI NETWORKS declara que este dispositivo ER-8-XG, está

conforme com os requisitos essenciais e outras disposições das Directivas

2014/30/UE,

2014/35/UE

. O texto integral da declaração de conformidade está disponível no seguinte

endereço de Internet:

www.ubnt.com/compliance

Română [Romanian] Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv ER-8-XG

este în conformitate cu cerințele esențiale și alte prevederi relevante ale Directivelor

2014/30/UE,

2014/35/UE

. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă

internet:

www.ubnt.com/compliance

Slovenčina [Slovak]

Týmto UBIQUITI NETWORKS, prehlasuje, že toto ER-8-XG zariadenie,

je v súlade so základnými požiadavkami a ďalšími relevantnými ustanoveniami smernice

2014/30/EÚ, 2014/35/EÚ

. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese:

www.ubnt.com/compliance

Slovenščina [Slovenian]

Družba UBIQUITI NETWORKS izjavlja, da je naprava ER-8-XG v

skladu z obveznimi zahtevami in drugimi ustreznimi določbami direktiv 2014/30/EU in

2014/35/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:

www.ubnt.com/compliance

Español [Spanish] Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo

ER-8-XG, cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o

exigibles de las Directivas

2014/30/UE, 2014/35/UE

. El texto completo de la declaración UE de

conformidad está disponible en la dirección Internet siguiente:

www.ubnt.com/compliance

Svenska [Swedish] Härmed UBIQUITI NETWORKS, intygar att denna ER-8-XG enhet är i

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som

framgår av direktiven

2014/30/EU, 2014/35/EU

. Den fullständiga texten till EU-försäkran om

överensstämmelse finns på följande webbadress:

www.ubnt.com/compliance

Online Resources

Support help.ubnt.com

Community community.ubnt.com

Downloads downloads.ubnt.com

UbiquitiNetworks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX,

EdgeOS, EdgeRouter, TOUGHCable, and UNMS are trademarks or registered

trademarks of UbiquitiNetworks,Inc. in the United States and in other

countries. All other trademarks are the property of their respective owners. NBAI101818

www.ubnt.com

Ubiquiti Networks, Inc.

685 Third Avenue, 27th Floor

New York, NY 10017

USA

Ubiquiti ER-8-XG Guida utente

Marca: Ubiquiti

Modello: ER-8-XG

Categoria: Convertitori multimediali di rete

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: Ubiquiti ER-8-XG User guide
español: Ubiquiti ER-8-XG Guía del usuario
dansk: Ubiquiti ER-8-XG Brugervejledning
română: Ubiquiti ER-8-XG Manualul utilizatorului

Ubiquiti ER-8-XG Guida utente

Ubiquiti ER-8-XG Guida utente

in altre lingue

Documenti correlati