Sanyo CE32LDY1-B Manuale utente

CE32LDY1-B

Please read this Instruction book before using your television.

We wish you many hours of pleasure from your new television.

Colour Television

INSTRUCTION MANUAL

2

END-USER LICENCE & SERVICING

The product (meaning the equipment or appliance to which this

documentation relates) incorporates Software (the software applica-

tions, utilities and modules embedded within the Product) which is

owned by Sanyo or its licensors. Before using the product, please

read the End-User Licence Conditions detailed below. If you do not

agree to the terms and conditions of the End-User Licence, Please

do not proceed to use the Product- repack the Product unused and

return it to your supplier together with proof of purchase for a full

refund. By using the product, you agree to be bound by the terms

and conditions of the End-User Licence.

Licence Grant, Conditions and restrictions

1. Sanyo grants you a non-exclusive, world-wide (subject to export

controls), non-transferable (except as permitted by 2 below),

royalty-free licence to use the Software upon and with the Product.

2. You may not transfer any of your licence rights in the Software

without the prior written consent of SANYO and if consent is

provided then the Software shall only be transferred in conjunction

with the transfer of the Product AND provided that the transferee

has read and agreed to accept the terms and conditions of this

licence.

3. You must ensure that the copyright, trademark and other protective

notices contained in the Software are maintained and not altered

or removed.

4. The Software provided hereunder is copyrighted and licenced (not

sold). SANYO especially does not transfer title or and ownership

rights in the Software to you. The Software provided hereunder

may contain or be derived from portions of materials provided to

SANYO under licence by a third party supplier.

5. Except as expressly permitted by statute you may not;

● use the Software in conjunction with any other computer

hardware other than the product;

● copy all or part of the Software;

● incorporate all (or any of) the Software into other programs

developed by (or on behalf of) you and/or used by you;

● reverse-engineer, decompile or disassemble the Software;

● make the Software (or any part of it) available, or permit its

redistribution, for use with any computer hardware other than

the Product; or rent, lease, gift, loan, sell, distribute or transfer

possession of the whole or any part of the Software.

Termination

This licence is effective until terminated. This licence will terminate

automatically without notice if you fail to comply with any of its

provisions.

Disclaimer

1. The Software is(to the extent permitted by law) supplied ‘as is’ and

SANYO and its suppliers expressly exclude all warranties, express

or implied, including (but not limited to) warranties of satisfactory

quality, fitness for purpose and non-infringement (save to the

extent that the same are not capable of exclusion at law).

2. In no circumstances will SANYO be liable for any direct, indirect,

consequential, or incidental damage (including loss of profits,

business interruption, loss of data or the cost of procurement of

substitute goods, technology or services) arising out of the use or

the inability to use the Software (save to the extent that such

liability is not capable of exclusion at law).

General

1. This End-User Licence will be governed by laws of England and

the User may only bring claims in the English Courts and SANYO

shall be entitled to bring a claim in the courts of any jurisdiction.

2. The above terms and conditions supersede any prior agreement,

oral or written, between you and SANYO relating to the Software.

End-User Licence

Your television is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or

even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such

spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can

prevent fire, shock and other hazards.

Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

■ If the power cord or plug is damaged.

■ If liquid has been spilt into the television receiver.

■ If television receiver has been exposed to rain or water.

■ If the television receiver has been dropped or the cabinet has been damaged.

■ If the television receiver exhibits a distinct change in performance.

■ If the television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will

often require extensive work by a qualified technician to restore the television receiver to normal operation.

Servicing

3

Do not allow anything to rest on the power

cord.

Do not locate this television receiver

where the cord will be damaged by people

walking on it.

Do not overload wall outlets and extension

cords as this can result in fire or electric

shock.

Slots and openings in the cabinet and in the back or bottom are

provided for ventilation to ensure reliable operation and to protect

it from overheating. These openings

must not be blocked or

covered. The opening

should never be covered with a cloth or

other material, and the bottom openings

should not be blocked

by placing the television receiver on a bed, sofa, rug, or other

similar surface.

Do not place this television near any heat sources such as

radiators, heaters, stoves and other heat-generating products

(including amplifiers).

Do not place the television in direct sunlight.

Do not place your television receiver on an unstable stand, shelf

or table. Serious injury to an individual, and damage to the

television may result if it should fall. Your sales person can

recommend approved stands or shelf and wall mounting

instructions. A special wall mounting kit is available for this model.

Warning To prevent injury, this television receiver must be

securely attached to the wall in accordance with the

manufacturers installation instructions.

If the television is built into a unit, or enclosed, the minimum

distances for ventilation must be maintained. Heat build up can

reduce the life of your television, and can be dangerous.

This television receiver should be operated only from the type of

power source indicated on the television or as indicated in the

Operating Instructions. If you are not sure of the type of power

supply in your home, consult your sales person or your local

power company.

Never add accessories that have not been specifically designed

for this television.

Do not drop or push objects into the television cabinet slots or

openings. Some internal parts carry hazardous voltages and con-

tact may result in an electric shock hazard.

Never spill liquids of

any kind on the television receiver.

Do not place items such as

vases containing liquid on top of the TV set.

Do not expose the television receiver to rain or use near water.

For example, near a bathtub, kitchen sink, in a wet basement, etc.

Do not use immediately after moving

the television from a low temperature to

a high temperature environment, as this

causes condensation, which may result

in fire, electric shock, or other hazards.

Before cleaning, unplug the television

receiver from the wall socket.

Never stand on, lean on or push the

television or its stand.

Never allow

children to play with the television or

its stand. Serious injury may result if it

should fall.

Do not apply liquid cleaners or

aerosol cleaners directly onto the tele-

vision receiver. Use a damp cloth for

cleaning.

Do not place candles or hot objects upon the TV, next to it or

behind it. Open flames must never be used near the TV set.

SAFETY

PRECAUTIONS

Installation

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but

improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe

the following basic rules for its installation, use and servicing.

R

/

D

L

/

S

MINIMUM DISTANCES

10cm

5cm

Use

4

● Cleaning your LCD screen.

Your LCD screen is coated in a non reflective film. Damage to

this film will result in possible discolouration. Any scratches will

not be repairable.

Clean your screen with a soft cloth, only rub lightly, do not use

detergents.

Do not stick anything to the screen, use solvent or alcohol

based cleaners, hit the screen with a hard object or rub the

surface hard.

● Placement of your LCD TV.

Table top stand

This LCD TV is supplied with a table top stand fitted.

Wall mounting bracket

An optional wall bracket is available for your LCD TV. Before you

consider wall mounting this TV, check that you have an appropri-

ate wall made from solid materials such as concrete or bricks.

You will have to remove the table top stand to use this.

SAFETY

PRECAUTIONS

Important:

This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.

3. Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains

a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution

board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------> Neutral

Brown ----> Live

1. The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

Care of your product

Important recycling information.

Your SANYO product is designed and

manufactured with high quality materials

and components which can be recycled

and reused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from

your household waste.

Please dispose of this equipment at your

local community waste collection/recycling centre.

In the European Union there are separate collection systems for

used electrical and electronic products.

Please help us to conserve the environment we

live in!

Note: This symbol mark and recycle system are applied only to

EU countries and are not applied to other countries of the

world.

5

1. Connect your aerial cable socket to the back of the TV set. Fit the

aerial cable as shown or as shown below when AV equipment is

connected.

● Connecting DVD / VCR player/ Satellite receiver or

Set top box.

We recommend that you connect all other equipment before Plug and

Play. The following examples are our recommended standard connec-

tion. For further information please consult your local dealer.

2. Connect the power cord of the LCD TV to a wall outlet.

✐ As this product does not have a mains On/Off switch, please

ensure your mains plug is easily accessible.

✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz. To

disconnect completely from the mains or, when the TV set is not to

be used for an extended period of time, it is advisable to discon-

nect the power cord from the power outlet.

✐ For all aerial problems please consult your local dealer.

1. HDMI (High Definition Multimedia Interface)

This TV set has an HDMI connector. When connected to the HDMI

source and HDMI is selected using the remote control,There is a short

time period before the picture appears at a much higher resolution.

This connection is located at the back of the TV set as shown below.

2.If you want to connect a DVD player with a DVI adaptor connection

cable,please ensure the sound is connected to L/S andR/D connec-

tions. Refer to diagram above.

DVI-I Format will only work carrying a Digital signal.

3. Y,Pb,Pr connection

This TV set has Y, Pb, Pr. You can connect your DVD player to these

terminals instead of using a scart lead as indicated below. This can

support high definition in analogue component form.

Install two "AAA" 1.5 volt batteries so that the "+" and "-" marks on

the batteries match the "+" and "-" marks inside the unit into the

remote control handset.

INST

ALLA

TION

Step : 1 Connections ( Essential)

DISH

IN

For satellite

only

Set top box

or

Satellite

AV1

OUT

IN

VCR

TV

DVD

As indicated

above

AC Mains Outlet

WARNING! High voltages are used in the operation of

this set. Refer service to qualified service personnel.

HDMI

L/S

R/D

3

HDMI

L/S

R/D

AV1

AV2

AV3

1

2

Step : 2 Remote control battery installation

+

-

+

-

6

The LCD TV will have a red Standby light to

show there is power.

The following screen will appear before Plug and Play will start.

Using your remote control, press the

e

or

d

button to highlight the

Country option. Select UK using the

7

or

8

button. Press the

e

or

d

button to highlight the Start option and press the

8

button to

begin the self-automatic tuning system called Plug and Play.

The TV scans the analogue channels first and then switches to digi-

tal channel mode and scans digital channels. This could take up to

15 minutes. During automatic tuning, the TV displays the tuning sta-

tus of analogue and digital channel tuning on the screen.

Now the installation is complete!

After Plug & Play, Digital channels are stored in the programme

positions shown in the All channel table.

Analogue channels will be automatically sorted as follows:

Programme position 1 : BBC1

Programme position 2 : BBC2

Programme position 3 : ITV

Programme position 4 : CH4 or S4C

Programme position 5 : CH5

Programme position 6 : ITV2

Programme position 7 : channels in order found.

✐

If any other channels are available in your reception area, the

remaining channels will be stored from programme position 7 in

sequence as found.

✐

If you move to another city or cable is installed, please follow the

description “Channel List - scan for channels”. (on page 13) or

“Preset Menu” (on page 17/18) for Analogue channels.

✐

This procedure only appears the first time you switch on.

1a. Control Buttons on TV

Press the 5 or 6 button to increase or decrease the programme

position.

Press the 1 or 2 button to increase or decrease the sound

volume.

Press the Time out button to freeze the picture and start recording

current live program

Press the stop button to cancel the time out function or stop playing

a disc.

1b. The Power light and HDD light are shown here. The Power light

displays Red and the HDD light displays Orange when Time out or

Replay are active,. The HDD light displays Red when Recording and

Green when Replaying.

2. Left side terminals

✐

To select the AV4 mode press the v button repeatedly.

✐

When the headphones are inserted the sound from the TV

speakers is muted.

PC Connection

This TV set has a PC connector.You

can connect a PC to the LCD TV and

use it as a monitor if required.

This connection is located on the side

terminal above the AV4 Video and Audio

sockets

3.5 mm Mini Headphone din

AV4 Video in

AV4 Left Audio in

AV4 Right Audio in

R/D

L/S

Step : 3 Switching on / Plug & Play

Thank you for purchasing your SANYO TV.

Now I am searching and storing all

programmes.

Please wait.

Channels found

The scan will take approximately 3 minutes

In progress

RET

Stop

Scan for channels

35

Terminals

INST

ALLA

TION

Time outTime out

StopStop

-

+

P

PC input

PC

I

IN

AV4

Time out

Stop

-

+

P

1b

Standby switch

Autostore

Country UK

Start

: Select

: Adjust

MENU

: Exit

7

D/A selector

To switch between analogue (TV)

Sound mute

To switch the sound from the speakers.

The sound changes as follows;

Normal volume -> Mute

Standby/Power on/off

To switch the TV on and off. Also see page 19.

and digital channels (DTV).

TV/AV switch

To switch from Digital TV, AV1, AV2, AV3, AV4

AV5 YPrPb, PC, HDMI or TV mode press repeatedly.

Screen mode selector

To select the screen mode, Auto, Natural,

Zoom14:9, Title In 14:9, Zoom 16:9,

Title In 16:9, Full or Normal.

Subtitle

Displays sub titles On and Off.

You may need to switch to title in by pressing

WIDE button. See page 25.

Guide

To call up the Digital TV schedule guide display on

the screen. (refer to page 14).

Picture mode selector

To access a series of picture modes:

Personal, Dynamic, and Standard or ECO.

Volume up/down

To adjust the sound level.

Return

Returns back to previous screen

in menu. Exits interactive mode.

OK

To save the setting in the menu,

or to call up the All channel table.

Bass selection

To get an emphasised bass sound, On or Off.

Coloured buttons

Some channels have interactive services.

Use the red button to enter and other colours

as directed. Also used in menu functions

N/A

System selector

To select the colour system in the AV mode,

Auto, PAL, NTSC or SECAM.

Programme up and down

To select the next programme number or

previous programme number.

Direct programme selector

For direct access to programmes

using (0-9) numeric buttons for example

for channel 23, press 2 and 3 numeric

buttons.

MENU

To switch on the screen display menu on/off.

See page 8.

Cursors

To select the sub menu items in the

menu display, Up, Down, Left, Right.

Surround mode selector

To select the surround mode, Off, Mid, Max.

INFO

Shows the current and next programme on

the selected channel. (refer to page 14).

REMOTE CONTROL

- Digital Use

8

DIGIT

AL

OPERA

TION

The main menu screen takes you to many

functions in the TV. The buttons below are

the main buttons and their uses.

MENU button - Enters and exits menus.

Cursors

e

and

d

moves up and down in

each selected menu.

Cursor

7 8

Re-locates cursor bar to top

or bottom of main menu.

OK button save settings or enters next

menu.

RETURN button - Returns to the previous screen.

Refer to the bar at the bottom of the screen for added help in which

buttons to use.

1. Press the MENU button and select Picture using the

e

or

d

buttons.

2. Press the OK button to select.

3. Select Brightness, Contrast, Colour etc. using the

e

,

d

buttons and

adjust using the

7

,

8

buttons to obtain the best picture settings for

your environment.

Press the

MENU button to return to Main Menu. These settings

automatically store when you exit the menu.

Press the MENU button and select Sound using the

e

or

d

buttons, press the OK button to enter.

Select and adjust to obtain the best sound settings for your environ-

ment using the

e

,

d

and

7

,

8

buttons.

Press the MENU to return to Main Menu. These settings automatically

store when you exit the menu.

Press the MENU button to exit menu.

You can re-organize the channel list to allow quick access to your

favourite channels.

Press the

MENU button and select Channel organizer using the

e

or

d

buttons.

■ Remove a channel.

1. Highlight a channel to be removed.

2. Press the Red button an inset window will appear.

✐ Red button refers to coloured buttons Red, Green, Yellow and

Blue. Do not get confused with larger Red Standby button.

3. Press the OK to confirm deletion of the the chosen channel.

4. Press the Return button to exit.

■ Move selection.

To change the order of channels in your list.

1. Select the channel you wish to move using the

e

or

d

buttons.

2. Highlight the channel by Pressing the Green button to select.

3. Use the

e

or

d

button to move to a different position

4. Press the Green button to save the new order.

Repeat steps 1-4 until all channels are in the order you need.

5. Press the Return button to exit.

Picture menu

Sound menu

Channel Organizer

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock OK Save

Favourite

Lock

* * *

_

Main Menu

Picture

Sound

Channel organizer

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

Main Menu

Installation

Main menu

Picture

: Select

: Adjust

MENU

: Back

Brightness

C

o

ntrast

C

olour

Sharpness

Preset Personal / Dynamic / Standard / ECO

Noise

Reduction Mid / Min / Auto /

OFF

Dyn

. skin

tone ON / OFF

Text Brightness Min/ Mid / Max

/Max

Sound

Volume

Balance

Bass

Treble

Preset Personal / Talk / Music / Normal

Surround OFF / Mid / Max

: Select

: Adjust

MENU

: Back

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock OK Save

Favourite

Lock

Confirm

? Do you want to delete.

OK

RETURN

Cancel

* * *

_

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock OK Save

9

DIGIT

AL

OPERA

TION

■ Swap channels.

1. Choose a channel that you wish to swap with another by pressing

the

e

or

d

buttons . Press the Yellow button to enter the Swap

screen.

2. Use

7

,

8

and numeric buttons to enter channel number and

press the OK button to swap.( When in swap screen you can

press the RETURN button repeatedly to take you back a screen).

3. Press Return to exit.

4. Press the MENU button again to return to normal picture.

■ Favourites Mode

1. In Channel Organiser you can select channels to put in a

favourites mode. Using the

8

button you can select the channels

you want, a tick will appear near the selected channels.

2. Press OK to save your settings.

3. To activate the favourites mode exit out of menu. Press

7

or

8

button on the remote control, a window will appear to show that

favourite mode has activated.

4. To check the channels selected on favourite mode press OK on

the remote control and the channels will be displayed. To deactivate

the favourites mode and return to Normal mode press the

7

or

8

button and thiis will actvivate Normal mode.

The first time you use this function the code numbers are 0 0 0 0.If

you forget the code,reset the digital Configuration and enter the

default code (0 0 0 0 ).

● How to change the code to your own preference.

1. Press the MENU button to select Main Menu.

2. Using the

e

or

d

buttons select Configuration and press the OK

button to enter.

3. Press the

d

button to select Change parental code. Press the

OK button to enter.

4. Enter the Old code in the box that is highlighted, using the 0-9

numeric button

5. Enter the New code in the next box that is highlighted, using the

0-9 numeric buttons.

6. To Confirm the new code, Enter the New code again in the last

highlighted box.

7. A prompt Save new code will appear. If you are happy with the

new code press the OK button to return to the Main Menu

✐ Press the RETURN button repeatedly to return to Main Menu at

any time

Press the MENU button to return to normal picture.

■ To activate parental lock.

1. Press the MENU button to select Main menu.

2. Using the

e

or

d

buttons select Parental lock. Press the OK

button to select.

1 BBC ONE All Channels

Main Menu

Picture

Sound

Channel organiser

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

Main Menu

* * *

_

?

Enter code to activate

parental lock

* * *

_

Main Menu

_

* * *

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock OK Save

Favourite

Lock

?

Swap

_

Main Menu

Configuration

Preferred language

Change parental code

Common interface

Parental lock

CHANGE PARENTAL CODE

Old code

New code

Confirm new code

* * * *

- - - -

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove

Move

Swap

Lock

OK

Save

Favourite

Lock

i Favourite mode activated

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock

OK Save

Favourite

Lock

Confirm

? Do you want to save.

OK

RETURN Cancel

i Normal mode Activated

10

DIGIT

AL

OPERA

TION

Deactivate parental lock

OK

Select

RET

Cancel

!

Configuration

Prefered language

Change parental code

Common Interface

Reader 1: Interface card

OK

Select

RET

Cancel

Common Interface

C I

CI CARD

3. Enter your code and press the OK button to save. Only the cor-

rect code will activate this feature! repeat 1-3 again if wrong code

is entered.

✐ Parental lock is now activated you will now have to enter the code

every time you wish to enter the Main menu unless parental lock

is deactivated.(See below)

● Blocking access to selected channels.

1. Press the MENU button to select Main menu.

2. Using the

e

or

d

buttons select Channel organizer. Press the

OK button to enter.

3.Using the

e

or

d

buttons select a Channel you wish to lock.

4.Press the Blue button, a locked symbol will appear to show it is

selected. To de-select press the Blue button again. Repeat until

all channels you wish to lock are selected.

5.To set the Channel lock, press the OK button to Save. Press the

Return button to return to the main menu.

✐ The channel lock will only be activated when parental lock is in

use.

● How to watch a locked channel.

1. Select a locked channel, This parental lock display appears.

2. Enter the Numeric Parental code.

3.The display will disappear and the normal channel picture will

appear,

4. The channel is now temporarily unlocked and may be watched

until the channel is changed.

✐ If Parental lock is activated and you wish to record this locked

channel, deactivate first before setting timer recording.

● How to deactivate parental lock

1. Press the MENU button to select Main menu.

2. Using the

e

or

d

buttons select Parental code. Press the OK

button to enter menu function.

3. Using the numeric buttons enter the parental code.

4. The inset display will disappear.

5. Main menu screen will now show Parental Unlock.

6. Press the MENU button or Return to exit to normal picture

✐ Once you have de-activated Parental Lock,all channels will be

available.

Main Menu

Picture

Sound

Channel organiser

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

?

Enter code to deactivate

parental lock

* * *

_

* * *

_

Main Menu

_

Enter code to watch a

locked channel.

* * *

.

Main Menu

Picture

Sound

Channel organiser

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

Main Menu

1 BBC ONE

2 BBC TWO

7 BBC THREE

30 CBBC

40 BBC NEWS 24

CH. No. Channel name

CHANNEL ORGANIZER

Favourite

Remove Move

Swap

Lock OK Save

Favourite

Lock

* * *

_

Channel Lock

Main Menu

* * *

_

* * *

_

Main Menu

Picture

Sound

Channel organiser

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

Main Menu

_

Parental Lock

Main Menu

* * *

_

* * *

_

Main Menu

Picture

Sound

Channel organiser

Parental lock

Configuration

Installation

Technical information

Off Timer

TV settings

Main Menu

_

11

Lock channels

Channel list

Scan for channels

Lock channels All channels

BBC ONE



BBC ONE

BBC TWO

ITV 1

Channel 4

five

ITV 2

BBC THREE

Teletext

BBC FOUR

Sky Travel

UK History

Ch 14

CH 15

QVC

TV Travel Shop



1

2

3

4

5

6

7

8

9

10

11

12

13

14

15



OK

Save

Parental lock

Y

Channels found



The scan will take approximately 3 minutes

In progress

RET

Stop

Scan for channels

0

DIGIT

AL

OPERA

TION

Signal information

Technical information

Software upgrade

Product data

Reset

BBC THREE (BBC)

Free

DVB Identifiers (9018,4103,4351)

Channel 63

Signal strength (%) 34

Bit error rate

Uncorrected errors/sec

OK

Select

RET

Cancel

Signal information

Looking for new version.......

RET

Cancel

Software upgrade

Reset receiver configuration?

RET

Cancel

!

Confirm

R

Product LDITPGFTG_01_00

Software 1.9.76 build jun 25 2003 16:10:15

Resourse 1.26.3

Boot 2.4.0

RET

Cancel

Product data

● Preferred language.

1. Press the MENU button to select Main Menu.

2. Select Configuration by using the

e

or

d

buttons. Press the OK

button to enter.

3. Press the

d

button to highlight Preferred language and press

the OK button to enter.

Audio - Select your preferences as required.

Example. If you speak Welsh or Gaelic and prefer to receive

Welsh or Gaelic audio when it is transmitted then select Welsh or

Gaelic for your first Language and English as your second.

4. Press the

7

or

8

button to select Language, press the

e

or

d

buttons, select second language and change your preference

using the

7

or

8

buttons.

Subtitling - Select your preferences as required.

If you wish for Welsh or Gaelic Subtitles instead of English to be

shown (when available) then select your preference for the first

language.

Example: as shown will give you English first language, if not

available Welsh may be shown.

5. To change press the

e

or

d

buttons to highlight the box and

press the

7

or

8

buttons to select your preferred First language

and repeat for Second language.

6. Press the

d

button to select Subtitle display. This can be set ON

or OFF by pressing the

7

or

8

buttons.

7. Press the OK button to Save.

The above display bar will appear on the screen as it is returned to

the normal TV picture.

● Common Interface

This TV set provides a common Interface slot on the top rear of the

TV set behind the control buttons. .

1. Press the MENU button to select Main Menu.

2. Select Configuration by using the

e

or

d

buttons. Press the OK

button to enter.

3. Press the

d

button to highlight Common Interface and press the

OK button to enter.

The following screen appears to show that a card is inserted.

When you select OK, follow the on screen directions. This will vary

depending on the type of card inserted.

Important!

The TV should be turned off by the Mains Power switch when insert-

ing or removing the Common Interface Card, otherwise it may cause

damage to the card or the TV set.

● Preferred Setup

1. Press the MENU button to select Main Menu.

2. Select Configuration by using the

e

or

d

buttons. Press the OK

button to enter.

3. Press the

d

button to highlight Preferred Setup and press the

OK button to enter.

4. Press OK on the remote to Select MHEG5 for Digital Teletext or

Select Subtitles for on screen subtitles by using the

e

or

d

but

tons.

5. Select OK to save your preferred setting and exit the menu. On

exiting the menu screen a message appears showing that the set

tings chosen have been activated.

6. The message on screen for Subtitles will read Priority set to DVB

setup

Configuration

Preferred language

Change parental code

Common interface

LANGUAGE CHOICE

Audio

First language

Second language

Subtitling

First language

Second language

Subtitle display

Welsh

English

Welsh

English

0ff

Navigate

OK Save RETURN Cancel

LANGUAGE CHOICE

OK

Information

RETURN

Cancel

Cam. Module :- Top Up TV

CI

Card

P

TIME OUT STOP

i Your modifications are saved

i Priority Set to MHEG

i Priority Set to DVB Subtitle

12

DIGIT

AL

OPERA

TION

1 (not set) --/--/-- --:-- --:-- (not set)

2 (not set) --/--/-- --:-- --:-- (not set)

3 (not set) --/--/-- --:-- --:-- (not set)

4 (not set) --/--/-- --:-- --:-- (not set)

5 (not set) --/--/-- --:-- --:-- (not set)

6 (not set) --/--/-- --:-- --:-- (not set)

7 (not set) --/--/-- --:-- --:-- (not set)

8 (not set) --/--/-- --:-- --:-- (not set)

9 (not set) --/--/-- --:-- --:-- (not set)

10 (not set) --/--/-- --:-- --:-- (not set)

11 (not set) --/--/-- --:-- --:-- (not set)

12 (not set) --/--/-- --:-- --:-- (not set)

Edit/Add event

OK

Delete

R

Cancel

RET

Current events

Channel Date & time End

BBC ONE

17/07/03

10:52

OK

Save

RET

Cancel

Set event

Channel

Wake-up day

wake-up time

Finish time

Repeat

11:28

No repeat

Event #1 is due to start in 4

minutes. Press YELLOW to switch

now. GREEN to switch on time.

RED to delete the event .BLUE to cancel.

?

Delete

R

Due

G

Now

Y

Cancel

B

■ Off-timer setting

The Off timer will switch the TV set into the standby mode when the

selected time period has elapsed.

Press the MENU button to select main menu.

Press the

e

or

d

buttons to select Off timer. Press the OK button

to enter menu (Setting / Off timer).

Select your desired time by pressing the

7

or

8

button.

The time changes in 5 minute steps. The maximum time is 2:00hrs.

When Off timer has been set the time will show briefly on the screen

with the remaining time.

Press MENU button or RETURN button repeatedly to return to

normal TV picture.

✐ If the TV set is switched off by the Mains Switch 4 and by using

the Power button on the remote control, or during Autosort, the

timer settings will be cancelled.

■ Alarm timer

1. Press the MENU button. Select Off timer using the e or d button

press the 8 button to enter and select timer.

2. Select Alarm-Timer using the e or d button.

3. Press the 7 or 8 button to change time.

The time changes in 1 minute steps.The maximum time is 180 mins.

To cancel the alarm, press any button and the display will disappear.

✐ If the TV set is switched off by the standby button

4

on the

remote control or by the standby switch

4

on the top of the TV

set the timer settings will be cancelled.

● Scan for channels

1. Press the Menu button to select Main Menu.

2. Select Installation by using the

e

or

d

buttons. Press the OK

button to enter.

1. Select Manual or Auto scan by using the

e

or

d

buttons. Press

OK button to enter.

2. Using the

e

or

d

buttons, this screen will allow you quickly to

tune into any Channel multiplex emitted by the Transmitters in

your area.

3. Press the OK button to scan.

✐ Only those channels showing appreciable signal strength are suit-

able for viewing.

1. If Auto Scan is chosen, when completed, all channels are saved

automatically.

✐ Parental lock is still saved after the scan for channels has been

initialised.

Off Timer menu

Timer

: Select

: Adjust

MENU

: EXIT

Off Timer 5~ 120

Alarm Timer OFF

Installation

SCAN FOR CHANNELS

Channel(s) found: 0

This scan will take approximately 3 minutes.

In progress... RETURN Stop

Main Menu

Manual Scan

Auto Scan

i

Installation

MANUAL SCAN

Navigate OK Scan RETURN Cancel

Band width (MHz) 8

Channel number CH-21

Frequency (kHz) 474000

Signal strength

Manual Scan

Auto Scan

Timer

: Select

: Adjust

MENU

: EXIT

Off Timer OFF

Alarm Timer 1 ~180

13

DIGIT

AL

OPERA

TION

In this section a lot of the information will only be useful to a

technician. Some parts are however useful to you. If there is

an upgrade in software you will need this section to upgrade

your TV from time to time.

1. Press the Menu button to select Main Menu.

2. Select Technical Information menu by using the

e

or

d

buttons. Press the OK button to enter.

3. Select Signal information by using the

e

or

d

buttons

and press the OK button to enter.

This screen cannot be altered but if you have a problem you

may need to refer to this screen for some data.

4. Press the Return to go back to Technical information

screen.

■ Software upgrade

1. Press the

d

button to select Software Upgrade screen.

Press the OK button to enter.

This looks for any new software upgrades that maybe trans-

mitted at any time.

2. Press the Return button to go back to Technical informa-

tion screen.

3. Select Product Data by using the

e

or

d

buttons and

press the OK button to enter.

This is useful to service engineers.

4. Press the Return button to go back to Technical informa-

tion screen.

5. Press the

d

button to select Reset screen. Press the

8

button to enter.

If you press Red button to confirm it will return all settings to

factory (default) mode for digital channels. To start a scan for

all available channels switch the TV set Off and On again or

run auto scan

■ Child lock

You can prevent small children from operating the TV

with the front buttons of the TV set.

Press the

MENU button to select main menu.

Press the

e

or

d

buttons to select TV settings. Press

the OK button to enter menu (Setting).

Press the

e

or

d

buttons to select Child lock. Child

lock can be set to

ON or OFF. Press the

7

or

8

but-

tons to select.

Press the

MENU button repeatedly to exit menu.

The child lock mode will be reset to “OFF” when the

TV set is switched off with the

Mains ON/OFF 3

switch.

■ Timer menu

Select timer menu by using the

8

button from the TV

setting menu. On the timer menu OFF timer and Alarm

timer can be used (see page 12 and 17)

■ Setting of AV2 input mode

If you use a VCR which has S-VHS, you should con-

nect it to AV2 and change the AV2 menu to S-VIDEO.

Press the

MENU button to select main menu.

Press the

e

or

d

buttons to select TV settings. Press

the

8

to enter menu (Setting, as shown above).

Press the

d

button to select AV2 and select VIDEO or

S-VIDEO by pressing the

7

or

8

buttons.

Press the MENU button or the RETURN button twice

to return to normal TV picture.

Technical Information

Technical information

Signal information

Software upgrade

product data

Reset

7: BBC THREE (FTA)

Network : Crystal Palace

Provider : <not available>

Frequency (kHz) 506000 - Band width (MHz) 8

Video none - Audio none - PCR none - SUB none

Channel number 25

Signal strength (%) 34

Bit error rate 6.23e+08 bps

Uncorrected errors/sec 0 packet(s)

Signal information

Software upgrade

Looking for new version.......

Return

Cancel

OK or

Reset digital configuration

?

Cancel

Return

Confirm

Product data

Hardware version :1.0

Software version : ADID0324

Build on : Jan 07 2006 at 09:01:43

TV Setting menu

Setting

: Select

: Adjust

MENU

: Back

CHILD LOCK OFF / ON

Timer

AV2 Video / S-Video

14

The guide shows the digital TV channel schedule for the next 7

days.

1. Press the guide button on your remote control.

2. A schedule will appear on the screen.

3. Use the

e

or

d

buttons to move up and down the program list.

Use the

7

or

8

buttons to show the daily program schedule lists.

4. Press the OK button to get more information on the programme

you have selected. The program selected will be highlighted

yellow.

5. To set recording see Timer recording below

- This feature is used when you wish to record a digital channel on

your Hard disk recorder.

- In order to record digital channels you cannot watch another digital

channel when recording.

- Timer recording will switch your TV set to the digital channel at the

preset time until the finish time is reached.

- Whilst timer recording is running you can switch to Analogue TV.

- You can also switch your TV into Standby mode.

✐ If channel has been locked (Parental lock) and you have set timer

record for locked channel it will not record. You have to deacti-

vate parental lock first.

1. Press the Guide button to set recording.

2. Press the RED button to select set recording

3. A Set events screen will appear.

4. Select channel by pressing the

7

or

8

buttons and rotate

through all available channels.

5. Press the

d

button to select Wake-up day box. Enter your day,

month and year by using numeric buttons (0-9). and using the

7

or

8

buttons to move left and right.

6. Press the

d

button to select Wake-up time box. Enter your time

by using numeric buttons (0-9). and using the

7

or

8

buttons to

move left and right.

7. Press the

d

button to select Finish time box. Enter your time by

using numeric buttons (0-9). and using the

7

or

8

buttons to

move left and right the time you wish to finish.

8. Press the

d

button to select Repeat box. Press the

7

or

8

but-

tons to enter No repeat, daily, or weekly. This would be a useful

feature if you have a favourite programme that you dont want to

miss and it is shown on a daily or weekly schedule.

9. Press the OK button to save settings, you can repeat again or

press the RETURN button to go back. Once the OK button is

pressed, the HDD Timer Record menu appears with the preset

data added from the Set Events saved settings.

10. The entered settings can be changed such as the Date/Time/

Duration/ Program. Once the settings have been entered using the

8

button move to Save/ Cancel. Once the seetings have been Saved/

Canceled using the OK button, the Playlist menu appears on

screen to exit press the

Timer REC button.

When you press the info button in digital mode you will be displayed

a window showing all the channels available.

The channel you want info on will be highlighted yellow and will be

viewed on the right side of the displayed window.

Press the

e

or

d

buttons to select current channel information.

Press the Green button to show information on the following pro-

gram.

Press the Blue button to bring up the weekly program guide.

Press

Return on the remote to exit the info window.

From time to time upgrades will become available. When this hap-

pens the following screen appears.

To upgrade press the

OK button and the following screen will

appear.

Press the

OK button to start, this automatically downloads for you.

The following screen appears.

The following screen appears to show that the upgrade is nearly fin-

ished. Once this screen disappears the upgrade is complete.

DIGIT

AL

OPERA

TION

Guide

EPG

[NOW]

09:30, 26 JAN 2006

Navigate Set Recording Next Weekly

1 BBC ONE

2 BBC TWO

3 ITV1

4 CHANNEL 4

5 FIVE

6 ITV2

[11:30 - 12:00, Five News] National and International News. [S]

‘ Info’ button

Programme Download

Do you want to download

the latest software.

?

CancelReturnOK Confirm

Software update from AIR

Please wait.....

Loader Version

Hardware Version

Version

Total Size

Size Collected

Software update from AIR

Downloading Application Software...

Loader Version

Hardware Version

Version

Total Size

Size Collected

2.02

1.00

1.01

883332

4068

Software update from AIR

In progress....

Fusing into FlashROM

PLEASE DONT SWITCH OFF THE TELEVISION

If it takes longer than 20 minutes,

Contact your television supplier

Once you have started the upgrade process you must not inter-

rupt it (disconnect or separate it from the mains supply) under any

circumstances. Do not press any key on the remote control or the

top of the cabinet. If you interrupt the upgrade process the IDTV

may be defective afterwards.

Timer Recording

SET EVENTS 00:06, 01 Jan 2006

Channel name BBC THREE

Wake-up day 01/01/2006

Wake-up time 00:05

Finish time 00:36

Mode Once

Navigate OK Save RETURN Cancel

ID Date Start Duration Mode Program

Move Change 0-9 to set data

2

05/04/ 06 19:00:00 : 45 HQ D

SAVE CANCEL

15

■ DVD controls

With selected Sanyo DVD players you can use this remote. The fol-

lowing table shows all available function buttons for the DVD. When

you use a compatible Sanyo DVD player, first press and hold the

DVD button and then press your desired function button.

REMOTE CONTROL

-

Analogue

D/A selector

To switch between analogue (TV)

Sound mute

To switch the sound from the speakers.

The sound changes as follows;

Normal volume -> Mute

Standby/Power on/off

To switch the TV on and off. Also see page 19.

and digital channels (DTV).

TV/AV switch

To switch from Digital TV, AV1, AV2, AV3, AV4

AV5 YPrPb, PC, HDMI or TV mode press

repeatedlyPress and hold, few seconds AV selection

bar appears. Select mode by using .

Screen mode selector

To select the screen mode, Auto, Natural,

Zoom14:9, Title In 14:9, Zoom 16:9,

Title In 16:9, Full or Normal.

Picture mode selector

To access a series of picture modes:

Personal, Dynamic, and Standard or Eco.

Volume up/down

To adjust the sound level.

OK

To save the setting in the menu,

or to call up the All channel table.

Bass selection

To get an emphasised bass sound, On or Off.

System selector

To select the colour system in the AV mode,

Auto, PAL, NTSC

Programme up and down

To select the next programme number or

previous programme number.

Direct programme selector

For direct access to programmes

using (0-9) numeric buttons in analogue

and digital. For selection of analogue

programme position 10 - 99, for example 23,

first press -/-- button and press

2 and 3 numeric buttons.

MENU

To switch on the screen display menu on/off.

See page 8.

Cursors

To select the sub menu items in the

menu display, Up, Down, Left, Right.

Surround mode selector

To select the surround mode, Off, Mid, Max.

CS button

Press the button once to scan through all

current channels already tuned in. Press

again to cancel.

Nicam / Bilingual selector

To switch the sound mode as follows; NICAM or MONO

in the stereo programmes. A or B in the bilingual

programmes. If the nicam or stereo sound reception is

poor in quality, you can switch to MONO sound reception

by pressing A•B button. This operates only analogue

channel mode.

Teletext / TV selector

To switch TV, MIX and Teletext mode.

keys

Power

Play

Pause

Stop

Next chapter selection

Previous chapter selection

n/a

DVD command mode selection

DVD (blue symbols)

DVD

OK

Enter

Cursor selection

16

Many of your TV’s functions are controlled through the menu function.

During menu operation the bottom of the screen show which controls

can be used.

Press the u button to enter and exit the 4 sub menus Sound,

Picture, Setting and Preset.

When a sub menu is selected its background shows white.

When you have set a Sub menu you can press the MENU button to

exit. Using the e or d button you can select any of the sub menu’s.

Press the MENU button and select Sound menu by pressing the

e or d button.

Press the 8 button to enter.

Select and adjust to obtain the best sound settings for your environment

using the e or d button and the 7 or 8 button.

Sound Preset : You can select between Music, Talk, Normal or

Personal.

2. Surround : Use 7 or 8 to select level of surround sound required

OFF / Mid or Max.

To exit press

MENU button.

1. Press the MENU button. Select Picture using the e or d button.

Press the 8 button to enter.

Set the picture settings for your “personal” preference.

Use the e or d button to select eg. Brightness and the 7 or 8

button to adjust levels.

Tint : is only available if NTSC equipment is connected.

Preset : You can select either your “Personal” settings,Dynamic,

Standard or ECO

To exit press the MENU button.

■ Noise Reduction

1. Press the MENU button. Select Setting using the e or d button.

Press the 8 button to enter.

2. Select Noise Reduction using the e or d button.

3. Set to MId, Max, Auto or Min by pressing the 7 or 8 button.

4. Press the MENU button to exit.

■ Dynamic Skin tone

1. Select ON or OFF using the

7

or

8

buttons.

2. Select ON and the tone of the picture will change to a pink

colour.

3. Select OFF and the colour tone will return to normal settings.

■ Text Brightness

This may be adjusted by using the

7

or

8

buttons to select between

Min/ Mid/ Max.

To Exit press the Menu button

✐ Your personal settings are automatically saved when you exit the

menu.

■ Child lock

You can prevent small children from operating the TV with the buttons

on the top of the TV set.

1. Press the MENU button. Select Setting using the e or d button.

Press the 8 button to enter.

2. Select Child lock using the e or d button.

3. Set the Child lock to Off or On by pressing the 7 or 8 button.

✐ The child lock mode will be reset to “Off” when the TV set is

completely disconnected from the Mains supply.

4. Press the MENU button to exit.

MENU OPERA

TION -

Analogue channels

Volume

Balance

Bass

Treble

Preset Personal / Talk / Music / Normal

Surround Mid / Max / OFF

Brightness

Contrast

Colour

Sharpness

Preset Personal / Dynamic / Standard / Eco

Noise Reduction Mid / High / Auto / Low / OFF

Dyn. Skin Tone ON / OFF

CHILD LOCK OFF

T

imer

AV 2 Video / S-Video

Program Sort (Program sort) - MOVE / DELETE

Program pos.

Program name

Autosort

Frequency

Skip

ON/OFF

Text Brightness Min / Mid / Max

Country

Memory OK? / OK

Main Menu

Sound

Picture

Setting

Preset

: Select

: Adjust

MENU

: Exit

Sound menu

Sound

Volume

Balance

Bass

Treble

Preset Personal / Talk / Music / Normal

Surround OFF / Mid / Max

: Select

: Adjust

MENU

: Back

Picture menu

Picture

: Select

: Adjust

MENU

: Back

Brightness

C

o

ntrast

C

olour

Sharpness

Preset Personal / Dynamic / Standard / ECO

Noise

Reduction Mid / Min / Auto /

Max

Dyn

. skin

tone ON / OFF

Text Brightness Min/ Mid / Max

Setting menu

Setting

: Select

: Adjust

MENU

: Back

CHILD LOCK OFF / ON

Timer

AV2 Video / S-Video

17

■ AV2 setting

In setting menu, to select AV2 press the 8 button and set to Video

or S-Video depending on your external equipment. If you use a VCR

which has S-VHS, you should connect it to AV2 and change the AV2

menu to S-VIDEO.

1. Press the MENU button. Select Setting using the e or d button

press the 8 button to enter.

2. Select AV2 using the e or d button.

3. Press the 7 or 8 button to select which Video or S-Video.

4. Press the MENU button to exit, this automatically stores your

changes.

■ Off-timer setting

The Off timer will switch the TV set into the standby mode when the

selected time has elapsed.

1. Press the MENU button. Select Setting using the e or d button

press the 8 button to enter.

2. Select Timer using the e or d button and then select OFF Timer

using the e or d buttons.

3. Press the 7 or 8 button to change time.

The time changes in 5 minute steps.The maximum time is 2:00hrs.

If you have set the off timer, a display appears in the corner of the

screen.

✐ If the TV set is switched off by the standby button

4

on the

remote control or by the standby switch

4

on the top of the TV

set the timer settings will be cancelled.

4. Press the MENU button to exit.

■ Alarm Timer setting

The Alarm-timer will sound the alarm for 15 secs, when the selected

time has elapsed.

1. Press the MENU button. Select Setting using the e or d button

press the 8 button to enter and select timer.

2. Select Alarm-Timer using the e or d button.

3. Press the 7 or 8 button to change time.

The time changes in 1 minute steps.The maximum time is 180 mins.

To cancel the alarm, press any button and the display will disappear.

✐ If the TV set is switched off by the standby button

4

on the

remote control or by the standby switch

4

on the top of the TV

set the timer settings will be cancelled.

4. Press the MENU button to exit.

The preset menu can be used to tune new channels, to reorder

channels and their programme positions, and to make fine adjust-

ments to the tuning.

1.Press the Menu button

2. Select Preset using the

e or d. Press the 8 button to enter

● Program sort

This is used to preset a received channel in any desired programme

position.

Use the ed or 78 buttons on your remote control to move to

selected program numbers. The number you have selected will be

highlihted yellow.

To move a program number press the Green button on your remote

and use the ed or 78 buttons to place it where you want it

moved to.

To delete a program select the number and press the Red button on

your remote to Delete it

■ Program Name.

With this feature individual channels may be numbered or renamed

by using the 7 or 8 buttons. Using the 5 or 6 buttons. Press

the 8 button, the first character space will be highlighted. Press the

5 or 6 buttons until the number or first letter you require

appears (0-9, A-Z, a-z, ?, !, -, +). Press the 8 button to select the

second character.

You can assign 7 characters of information. When finished press the

8 button repeatedly until no character is highlighted.

MENU OPERA

TION

Setting menu

Setting

: Select

: Adjust

MENU

: Back

CHILD LOCK OFF / ON

Timer

AV2 Video / S-Video

Preset menu

Preset

: Select

: Adjust

MENU

: Back

Program Sort

Program pos.

6

Program name

Au

to sort

Fr

equency 495.25 MHz

Skip

Memory OK? / OK

ON / OFF

Country

UK

Program sort

1 6 11

2 7 12

3 8 13

4 9 14

5 10 15

Move Delete

Timer

: Select

: Adjust

MENU

: EXIT

Off Timer 5~ 120

Alarm Timer OFF

Timer

: Select

: Adjust

MENU

: EXIT

Off Timer OFF

Alarm Timer 1 ~180

Preset

: Select

: Adjust

MENU

: Back

Program Sort

Program pos.

6

Program name

Au

to sort

Fr

equency 495.25 MHz

Skip

Memory OK? / OK

ON / OFF

Country

UK

18

● AutoSort

1. Press the MENU button. Select Preset using the e or d button.

Press the 8 button to enter.

2. Select Auto sort by using the e or d button. Press the OK but-

ton to enter.

3. As soon as the OK button has been selected Scanning will

automati

cally begin.

4. The channel frequency will change and the channels will be stored

in numeric order once found.

All available channels will be automatically stored, starting from posi-

tion 01.

● Frequency

The frequency shown will be the frequency being dis

played except when Scanning, then the frequency

shown will change as the scan progresses.

1. To manually Select Frequency by using the 5 or 6 button.

(Refer to the channel table.)

You can either...

a) Enter the frequency using the 0-9 buttons referring to the

channel table.

b) Press and hold the 7 or 8 buttons until the frequency starts

scanning (about 5 seconds), scanning will stop when a chan-

nel is found.

Repeat above until the correct channel is found.

2. Press the 5 or 6 button to select Memory. Press the OK

button to store the new frequency and allother settings.

● Skip

Skip is situated directly beneath Frequency on the screen.

When ‘ON’ it removes access to a channel using the e or d button.

The only way that selected channel can be accessed will be by using

the direct channel access keys.

■ Memory.

Memory is situated directly beneath Skip on the screen.

When all the preceding headings under preset have been adjusted to

your satisfaction, using the OK button, change ‘OK?’ to ‘OK’ all the

preset settings will be stored automatically.

MENU OPERA

TION

Preset menu

Preset

: Select

: Adjust

MENU

: Back

Program Sort

Program pos. 6

Program name

Frequency 495.25 MHz

Autosort Busy

Skip ON/OFF

Memory OK?/ OK

Country

A

Displayed

channel no.

C 1    43.25

C 2 A E2 R1 48.25

C 3 A E3 55.25

C 4 B E4 R2 62.25

C 5 D E5 R6 175.25

C 6 E E6 R7 182.25

C 7 F E7 R8 189.25

 C 8  E8 R9 196.25

C 9 G E9 205.25

C10 H E10 R10 210.25

C11 H1 E11 R11 217.25

C12 H2 E12 R12 224.25



C21 21 E21 E21 471.25

C22 22 E22 E22 479.25

C23 23 E23 E23 487.25

C24 24 E24 E24 495.25

C25 25 E25 E25 503.25

C26 26 E26 E25 511.25

C27 27 E27 E27 519.25

C28 28 E28 E28 527.25

C29 29 E29 E29 535.25

C30 30 E30 E30 543.25

C31 31 E31 E31 551.25

C32 32 E32 E32 559.25

C33 33 E33 E33 567.25

C34 34 E34 E34 575.25

C25 35 E35 E35 583.25

C36 36 E36 E36 591.25

C37 37 E37 E37 599.25

C38 38 E38 E38 607.25

C39 39 E39 E39 615.25

C40 40 E40 E40 623.25

C41 41 E41 E41 631.25

C42 42 E42 E42 639.25

C43 43 E43 E43 647.25

C44 44 E44 E44 655.25

C45 45 E45 E45 663.25

C46 46 E46 E46 671.25

C47 47 E47 E47 679.25

C48 48 E48 E48 687.25

C49 49 E49 E49 695.25

C50 50 E50 E50 703.25

C51 51 E51 E51 711.25

C52 52 E52 E52 719.25

C53 53 E53 E53 727.25

C54 54 E54 E54 735.25

C55 55 E55 E55 743.25

C56 56 E56 E56 751.25

C57 57 E57 E57 759.25

C58 58 E58 E58 767.25

C59 59 E59 E59 775.25

C60 60 E60 E60 783.25

C61 61 E61 E61 791.25

C62 62 E62 E62 799.25

C63 63 E63 E63 807.25

C64 64 E64 E64 815.25

C65 65 E65 E65 823.25

C66 66 E66 E66 831.25

C67 67 E67 E67 839.25

C68 68 E68 E68 847.25

C69 69 E69 E69 855.25

UHF band



OIRT

Channels

CCIR

channels

Italian

channels

Displayed

channel no.

C75 X X 69.25

C76 Y Y R3 76.25

C77 C/Z Z R4 83.25

C78 Z+1 Z+1 R5 90.25

C79 Z+2 Z+2 97.25

C80 S1 S1 105.25

C81 S2 S2 112.25

C82 S3 S3 119.25

C83 S4 S4 126.25

C84 S5 S5 133.25

C85 S6 S6 140.25

C86 S7 S7 147.25

C87 S8 S8 154.25

C88 S9 S9 161.25

C89 S1S S10 168.25

C90 S11 S11 231.25

C91 S12 S12 238.25

C92 S13 S13 245.25

C93 S14 S14 252.25

C94 S15 S15 259.25

C95 S16 S16 266.25

C96 S17 S17 273.25

C97 S18 S18 280.25

C98 S19 S19 287.25

C99 S20 S20 294.25



H21 S21 S21 303.25

H22 S22 S22 311.25

H23 S23 S23 319.25

H24 S24 S24 327.25

H25 S25 S25 335.25

H26 S26 S26 343.25

H27 S27 S27 351.25

H28 S28 S28 359.25

H29 S29 S29 367.25

H30 S30 S30 375.25

H31 S31 S31 383.25

H32 S32 S32 391.25

H33 S33 S33 399.25

H34 S34 S34 407.25

H35 S35 S35 415.25

H36 S36 S36 423.25

H37 S37 S37 431.25

H38 S38 S38 439.25

H39 S39 S39 447.25

H40 S40 S40 455.25

H41 S41 S41 463.25



Vision

Frequency

[MHz]

CCIR

channels

Italian

channels

Vision

Frequency

[MHz]

OIRT 

Channels

■

Channel Table

The table below shows the receivable channels and channel

allocation for this LCD TV set.

19

Teletext - This is a free service to give you lots of varied informa-

tion such as news, sports results, weather and travel features.

Teletext reception

If your aerial signal is poor, the teletext reception operation may be

erratic.

Teletext brightness level

You can change the teletext brightness level. Please return to TV

mode.(See Picture menu -Text Bright on page 16).

Sound volume control

In teletext mode sound volume and muting can be controlled.

However they are not displayed on the screen.

■ Switching into / from standby mode

The Standby mode is used for switching the TV set off for short

periods of time. In standby mode the TV is switched off but is

still receiving mains power.

● To turn the TV set into standby mode, press the

4

button.

The red power indicator illuminates more brightly.

● To turn the TV set ON from standby mode, press any of the

following buttons:

4

,

5

,

6

or

0-9 buttons.

■ Auto shut off

This TV set will automatically switch into the standby mode, 10

minutes after a signal is no longer received. The time until the

set will switch off is displayed on the screen.

■ Use of Audio Output Jacks

This TV provides the audio monitor output jacks on the left side

of the cabinet. You can connect your audio equipment to these

jacks to give you sound with your audio equipment.

TELETEXT & OTHER OPERA

TION -

Analogue channels

Sub page access

Some text pages are made up of several

sub pages which rotate automatically if

you wish to view P4 of 8 press the sub page

button. “----” will appear. Enter 0004.

Direct access to subject headings

Coloured boxes are displayed at the bottom

of the screen. The 4 coloured buttons give

access to the corresponding subjects or pages.

Direct access to a page

All the numeric buttons can be used

to select a page number directly.

If you need page 301, press 3 then

0 then 1.

Index page selector

To call up the Index pages.

eg. P100.

Page up and down

To select the next page number or

previous programme number.

Teletext/TV selector

To switch TV, MIX and Teletext mode.

Standby/Power on/off

To switch the TV on and off.

Reveal switch

This reveals hidden items on the teletext

page eg: a hidden answer to a quiz question.

Up / down page access

Press the button to select the next page

or previous page number.

Size switch

This will make either the top half or

the bottom half of the page expand

to fill the whole screen.

Stop

This stops the sub pages from changing.

The word “STOP” will appear instead of

the page number.

Return

To view the TV picture in the teletext mode

while waiting for the text page to change or update

(not available for sub pages).

Note. the page number will appear if the

text page is available.

Teletext

If you find the power indicator flashing, please turn the TV

set off with the Standby switch and disconnect the power

cord from the power outlet and contact our Service desk.

This warning is a sign to let you know that the power

protection function of this TV set is now operating.

HDMI

L/S

R/D

To audio equipment

Analogue and Digital Operation

20

REM0TE CONTROL - HARD DISK USE

Forward

To fast forward the HDD/ DVD content at

different forward rates

OK

Press OK button to confirm a selected item

in the HDD Setup menu

Direct programme selector

For direct access to programmes

using (0-9) numeric buttons for example

for channel 23, press 2 and 3 numeric

buttons.

Cursors

To select the sub menu items in the

menu display, Up, Down, Left, Right.

Display

Press to display current operation status.

For example while playing the hard disk use the

display button to view the current chapter, title etc

Time Out

To activate the Time out Function

This feature can pause live media

coverage.

Replay

To activate or deactivate the Replay Function

when the Always Replay function is OFF.

The Replay button does not work when

the Always Replay function is active

Pause/ Step

To pause the current playing content.

Press the button twice to display the video

image frame by fame

Play

Press to start playing the HDD/DVD content

Also to start playing a still picture from the

Time out or from the Replay function

Stop

Press to stop playing or

recording current content. This button

can be used to cancel Time out or Replay function

Record

Press to start recording from selected media content.

To activate sleep mode press the Record button twice

this will display the remaining record time on screen

Reverse

Press to fast reverse the

HDD/DVD content at different rewind rates.

To view REPLAY contents press the reverse

button then the PLAY button

ADV 30

To skip the HDD content 30

seconds forward

Previous/ Next

To jump to next/ previous title

or chapter while playing a DVD/HDD

HDD MENU (setup)

To show or hide the “Setupʼ menu

Record Mode

Press to select the recording mode.

This affects the video quality and

possibly recording length

Timer REC

To access directly to the

Timer REC menu

Repeat mode

Press to select a repeat mode:

Title: Repeat a tilte

ALL: Repeat all titles

OFF :no repeat (press repeatly untill displayed)

Play list/ menu

Press to show/ hide the play

list or menu screen

Zoom

Press to zoom in on the video image

Can elarge and pan a paused image.

(200%/ 400%/ 800% zoom rate)

Clear

Press to clear the settings in Timer Record

A-B repeat

Press to acces the A-B repeat function

To repeat certain sequences

La pagina sta caricando ...

Sanyo CE32LDY1-B Manuale utente

Sanyo CE32LDY1-B Manuale utente

in altre lingue

Documenti correlati

Altri documenti