Comelit IPPTZ120IR Manuale utente

IP PTZ CAMERA

ART. IPPTZ120IR – IPPTZ120IRB

Please read this manual thoroughly before use and keep it for future reference

Contents

1 Introduction....................................................................................................................................................................................................................................... 1

Performance Characteristics Features...................................................................................................................................................................................1

2 Hardware Installation...................................................................................................................................................................................................................... 2

System requirement................................................................................................................................................................................................................... 2

Installation environment.............................................................................................................................................................................................................2

Installation environment requirements........................................................................................................................................................................... 2

Recommend operating environment.............................................................................................................................................................................. 2

Hardware installation steps.............................................................................................................................................................................................. 2

Network connection............................................................................................................................................................................................................3

Connection instruction............................................................................................................................................................................................................... 4

3 Operating Guide for Network High Speed Dome......................................................................................................................................................................5

Set the IE Browser......................................................................................................................................................................................................................5

Download and Install ActiveX...................................................................................................................................................................................................5

Login..............................................................................................................................................................................................................................................7

Live view....................................................................................................................................................................................................................................... 8

System specification setting................................................................................................................................................................................................... 10

Device Info.........................................................................................................................................................................................................................10

PTZ setting........................................................................................................................................................................................................................ 11

Display settings.................................................................................................................................................................................................................11

Encoding............................................................................................................................................................................................................................ 12

Camera set........................................................................................................................................................................................................................ 12

Motion Detection...............................................................................................................................................................................................................13

Video Tampering.............................................................................................................................................................................................................. 14

Network Settings.............................................................................................................................................................................................................. 15

Multicast Config................................................................................................................................................................................................................ 16

DDNS Setting.................................................................................................................................................................................................................... 16

NTP Settings..................................................................................................................................................................................................................... 17

Email Settings................................................................................................................................................................................................................... 17

FTP Settings......................................................................................................................................................................................................................18

Alarm Input........................................................................................................................................................................................................................ 18

Alarm Output..................................................................................................................................................................................................................... 19

Exception Settings........................................................................................................................................................................................................... 19

User Info.............................................................................................................................................................................................................................20

System Update................................................................................................................................................................................................................. 20

Storage Management...................................................................................................................................................................................................... 21

Restore............................................................................................................................................................................................................................... 21

Local Setting......................................................................................................................................................................................................................22

File management...................................................................................................................................................................................................................... 22

Log search................................................................................................................................................................................................................................. 23

4 Appendix......................................................................................................................................................................................................................................... 24

SPECIFICATIONS................................................................................................................................................................................................................... 24

Network Interface of Network High Speed Dome.............................................................................................................................................................. 25

Default Network Parameters.................................................................................................................................................................................................. 25

i

CAUTION



Non-technician should not try to operate this high speed dome before reading this manual carefully (This manual are subject to change

without prior notice.)



Cut the power supply off before operating the device to avoid damage caused by mal-operation.



Interior of the camera are precision optical and electrical instruments. Heavy pressure, shock and other incorrect operations should be

prevented. Otherwise, may cause damage to product.



Please do not use the product under circumstances where the limits exceed the maximum specified temperature, humidity or power

supply specifications.



Contents in this manual may be different from the edition that you are using. Should any unsolved problem occur given that the product

is used according to this manual, please contact our technical support department or your product suppliers.



This manual content will be updated unscheduled, our company reserves the right to do manual contents update without further notice.



The default username for this device is “admin” and the password is blank. Default IP address is 192.168.1.188, HTTP port is

80, device port is 5050.

ii

PACKING LIST

Check if the packing contents match the packing list on receiving the products. The packing list is as below.

Part Quantity

Art. IPPTZ120IR 1

Wall mounting bracket 1

Rubber blanket 1

Screws bag 1

User manual 1

Certificate of approval 1

CD 1

Contact your local retailer if anything is missing in your package.

iii

1

1 Introduction

Performance Characteristics Features



Built-in 20X optic zoom lens, 1080P 25/30FPS



True Day/Night



H.264 High Profile /MJPEG encoding, VBR/CBR, dual streaming



Motion detection, network problem detect and process



TF card slot, snapshot, FTP upload, Email, Link preset



ONVIF Profile S-protocol



360° horizonal continuous rotation; vertical 0°-90°,256 presets,No monitoring blind area



Up to 100m IR distance



Efficient IR led, low power consumption – MTTF up to 30,000 hours



2 channels alarm input, 1 channel alarm output, audio input/ output, analog video output, Ethernet 10/100



IP66 protection

2

2 Hardware Installation

System requirement

• LAN or WAN Internet to connect server, via PC Ethernet (network card or network cable) TCP/IP protocol（Windows

/NT/2000/XP or later) connect , suggest Internet Explorer 5.0 version or later.

• Monitor and PC configuration:

CPU: PⅢ or later, RAM: 512M or later (above DirectX8.1)

• Monitor: 1920×1080 resolution

• Operation system: Windows NT, Windows2000, Windows XP, Windows 7.

Installation environment

Installation environment requirements

Far away from high-temperature resource and environment; improper place for ventilation; avoid install on shaky place.

Recommend operating environment

-30°C ~ +60℃

Hardware installation steps

Please make sure LAN and WAN are working before installation of the Network High Speed Dome. After checked all the

network system in good condition, keep your hands clean and dry, following the steps bellow.

• Unpack the box to check the goods

• Take out all goods which needed for installation from the box

• Take off the protection cover and insert the SD card (if need). Please refer to the SD card installation steps below.

Remove the screws with “7”

wrench

Figure 1

Remove the screws here

Figure 2

3

TF card slot

Figure 3

Insert Micro SD card following

the direction shown in Figure 4

Figure 4

• Connect related cables according to need (Power line, network line, audio line etc.)

• Connect the power supply

Note:

• Please read the user manual carefully before the installation.

• Make sure to turn off all the power when install the camera

• Please confirm the power transformer, avoid the device damage with unmatched power source

Network connection

• LAN connection

Use one network line to connect Network High Speed Dome with a switch of the LAN.

• WAN connection

Use one network line to connect Network High Speed Dome with a Router or XDSL Modem/Cable Modem as shown bellow.

• Connect the power supply

After connect the power source, the network camera will start operation automatically.

4

Connection instruction

5

3 Operating Guide for Network High Speed Dome

Set the IE Browser

If you visit Network High Speed Domefor first time, please set the IE browser.

Setting method: open the IE browser, click Internet Option into the "Security" page, click the "Custom Level" and then follow steps:

Download and Install ActiveX

You need to install ActiveX Control when you visit Network High Speed Dome for the first time through IE browser.

6

Input the IP address of Network High Speed Dome(default address http://192.168.1.188.) in Internet Explorer to enter into login page,

users can refer to the “ NETWORK SETTINGS” under “SETUP” menu to set the network.

Notice the below information hint, click “ Allow”. As Figure 3-1

Figure 3- 1

A file download dialog will pop out, click “Next” to installation. As figure 3-2.

Figure 3- 2

Select the ActiveX installation and storage file, the default installation and storage file is c:\Program Files\webactivex, and click “Next” to enter

next dialog. As figure 3-3

7

Figure 3-3

Click “ Install” to enter into the next dialog. As figure 3-4.

Figure 3-4

Click “Finish” to complete the ActiveX installation. As figure 3-5.

Figure 3-5

Login

Reopen Internet Explorer after ActiveX installation completes, input IP address (

http://192.168.1.188,)

of the Network High Speed Dometo turn to

login page, enter username (default setting is admin) and password (default setting is blank), click login to enter into main interface(see Figure 3-6):

8

Figure 3- 6

Live view

Live preview interface as figure 3-7.

Figure 3- 7

In the Live view interface, users can do operations such as voice intercom, listen, full-screen preview, video record, alarm information

check, PTZ and lens control, brightness, contrast, preset setting, cruise, track setting, linear, scan, idle, IR light, etc.



Voice intercom: connect sound pick-up device on the audio input port and active loudsperker on the audio outport port, then click

the talkback icon. Turn on the voice intercom switch and the icon shows as , the talkback between PC and Network High

Speed Dome can be performed. Audio input setting as default mode.



SNAP: click button, snap the current image and save it in .JPG format automatically to the storage directory of snapped

images. The default path is C:\Program Files\PREVIEW and the storage path is changeable.



Full Screen: Live preview in full screen, press keyboard ESC to exit from full screen display.



Record: ON/ OFF selectable. When select ON, the icon turn blue as and device do video recording and save in the

appointed files

9



Alarm Info: warns light flashing when camera device inform alarm. Support kinds of alarms record and setup or remove the alarm

setting, clear the alarm information.



Zoom-in: use the mouse to do local zoom for the video display area by scrolling the mouse wheel.



PTZ control: up/ down/ left/ right/ auto/ adjust the PTZ rotate speed, etc. As figure 3-8.



Lens control: do scaling, focus, iris operation, as figure 3-8.



Brightness: adjust the image brightness. As figure 3-9.



Contrast: adjust the image contrast. As figure 3-9.



PTZ setting: preset setting, cruise, track setting, linear scan, idle, IR light, as figure 3-10.

Preset setting: adjust the camera to the appointed angle and location through directional buttons and then select a

preset number on the preset drop down list, click to set it.

Call preset: select the preset number which needed to call on the preset drop down list, then click to call it.

Cruise: 255 presets addable, stay time 1-255s adjustable, cruise speed 1-7 levels selectable. All cruise tracking can be

call and delete independently.

Clear cruise: Click to clear all cruise scan setting

Call cruise: Click to call setted cruise scan

Tracking path setting: Select a number at the tracking drop down list, click , and do a serious PTZ operation, then click

to save and exit the tracking path setting.

Call tracking path: select a number at the tracking drop down list, click to call tracking path

Linear: select a number at the linear drop down list, click to set the linear scan initial position and do a serious PTZ

operation, then click to save and exit the linear scan setting. Linear scan only supported horizonal scan,

and the vertical angle depend on the final position, linear path is two point minimum path

Call linear: select a number at the linear drop down list, click to call linear scan

Idle : Idle include preset setting, cruise scan, tracking, scan. Click to set idle and the idle time is 1-15 min selectable, click

to save the idle ope setting, click to verify whether the idle setting completed.

When set idle successfully, speed dome camera will do idle operation after the setted idle time

IR light: Auto/ Manual selectable, when select Auto, it will turn on the IR led according to the zoom module multiples, near

open for 1X, middle-open for 2-4X, far open for 5X or 5X later. When select Manual, there All close/ near open/ middle open/

near middle open/ far open/ far near open/ middle far open/ all open totally 8 kind of choices

Masking: no function

• Cyclotron arrow: restore the default parameters. As figure 3-10.

Figure 3- 8

10

Figure 3-9

Figure 3- 10

System specification setting

Device Info

Network High Speed Dome “Device Info” interface as figure 3-11

Figure 3- 11



Device Name: Edit the camera name



Device Sn: Display the device Serial Number



Device Type: Display the device type



Serial No. : Display the product serial No.



Master Version: Display the software version date



Hardware Version: Display the hardware version number



Format: Switch to select the PAL and NTSC image scanning system



Device Time: Set and display the device current time

11

After all parameters setting completed, click “Save” and then it comes into effect immediately.

PTZ setting

Network High Speed Dome “ePTZ Set” interface as figure 3-12.

Figure 3-12



Protocol: Pelco D supported only



Address: 0-255 adjustable, default is 1



Baud Rate: Baud rate 9600 supported only



Operation method: Connect analog high speed dome at the Network High Speed Dome AB port, set the protocol and baud rate,

and control the high speed dome through IPC preview interface

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Display settings

Network High Speed Dome “Display settings” interface as figure 3-13.

Figure 3-13



Name:Modify the channel name



Time Format: Select different time display mode for the channel



Date Format: Select different date display mode for the channel



Bright: Adjust the brightness for the channel

12



Contrast: Adjust the contrast for the channel



Saturation: Adjust the saturation for the channel



Hue: Adjust the hue for the channel



Title Location: Set the channel title location for the channel



Date Adjustment: Set the channel date location for the channel



Cyclotron arrow: Restore the default parameters

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Encoding

Network High Speed Dome “Encoding” setting interface as figure 3-14.

Figure 3-14



Compress type: Main Stream (Normal)/ Sub Stream/ Main Stream (Event) selectable



Stream: Including complex stream/ video stream two types



Resolution: According to the camera, how the camera resolution type supported, the corresponding resolution will selectable



Bitrate Type: Constant/ Variable selectable



Bitrate: Set different bitrate for different channels



Frame Rate: Select different frame rate in the drop-down list,, default is “Full Frame”



Quality: Select different image quality according to your need, default is “Highest”



Video Encode: H.264/ MJPEG two kinds of video encode format



I frame Interval: Set the I frame internal time

After all parameters setting completed, click “Save” and the it comes into effect immediately. ( “Setup” setting will change the

camera parameters directly)

Camera set

Network High Speed Dome “Camera set” setting interface as figure 3-15.

13

Figure 3-15



Exposure control: Exposure mode include Full-automatic/ Shutter Priority/ Anti-Flicker, default is Full-automatic. When select

Full- automatic or Anti-Flicker, the shuttle value can not be setted, when select Shutter Priority, the shuttle value can be setted.



Gain: Low/ Medium/ High selectable, default is Low. The bigger of the gain value, the higher of the low illumination sensitivity and

the more obvious of noisy point



Color-mode: Normal/ Bright/ Nature selectable, default is Normal



WB mode: Auto WB/ Inside/ Outside selectable, select different white balance mode according to different scenes, default is Auto

WB



Mirror: Normal/ Horizonal Mirror/ Vertical Mirror/ 180 rotation selectable, default is Normal



Backlight mode: Close/ DWDR/ Backlight correction/ Highlight correction selectable, default is Close



Intensity: Low/ Medium/ High selectable. It is invalid when DWDR mode set as close



DNR mode: Close/ Low/ Medium/ High selectable, default is Medium



Zoom rate: Show/ Hide selectable, set the zoom rate and view the corresponding effect on the screen interface



Coordinate: Show/ Hide selectable, set the coordinate and view the corresponding effect on the screen interface



Status: Show/ Hide selectable, set the status and view the corresponding effect on the screen interface



Zoom speed: Low/ Medium/ High selectable, default is High



Slow shutter: Close/ Open



Defogging:Close/ Open

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Motion Detection

Network High Speed Dome “Motion Detection” setting interface as figure 3-16.

14

Figure 3-16



Enable: Select whether open the motion detection function.



Alarm Schedule: Set the alarm schedule from Monday to Sunday.



Drawing: Click Drawing, then set the detective area.



Clear: Click Clear to clear the current detective areas.



Sensitivity: The higher of the sensitivity, the obvious of the motion detective.



Email: Send Email to appointed mailbox when alarm triggered.



Snap: Snapshot and install the picture in the HDD when alarm triggered.



Alarm Output: There is a warner connect the alarm output port, alarm triggered the embedded relay switch to make alarm output.



Enable PTZ: Alarm input to link the PTZ motion.



Preset: Alarm input to link the preset.



Snap Interval: Set the snapshot interval time



Snap Count: Set the snapshot count in every second

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Video Tampering

Network High Speed Dome “Video Tampering” setting interface as figure 3-17

Figure 3-17



Enable: Set whether open the video tampering



Alarm Schedule: Set the alarm schedule from Monday to Sunday.

15



Drawing: Click Drawing, then set the video tampering area.



Clear: Click Clear to clear the current video tampering areas.



Sensitivity: The higher of the sensitivity, the obvious of the video tampering effect.



Email: Send Email to appointed mailbox when alarm triggered.



Snap: Snapshot and install the picture in the HDD when alarm triggered.



Record: Video record and installed in the HDD or send as FTP to keep when alarm triggered.



Alarm Output: There is a warner connect the alarm output port, alarm triggered the embedded relay switch to make alarm output.



Enable PTZ: Alarm input to link the PTZ motion.



Preset: Alarm input to link the preset.



Snap Interval: Set the snapshot interval time



Snap Count: Set the snapshot count in every second

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Network Settings

Network High Speed Dome “Network Settings” interface as figure 3-18.

Figure 3-18



IPV4: IP protocol version 4



IPV6: IP protocol version 6



Static IP: The device IP address is permanent



DHCP: Click DHCP, when turn on the router’s DHCP, the camera will get the IP address from router automatically



IP address: Input the corresponding numbers to change the IP address



Subnet Mask: Input the corresponding IP subnet mask



Default Gateway: Input the corresponding gateway address



DNS 1: DNS server IP address



DNS2: DNS server standby IP address



SNMP: To detect whether it will cause any management attention as device connected on the network



SNMP Manager IP: Input the corresponding SNMP manager IP address



HTTP Port: Input the corresponding port ( Default is 80)



HTTPS Port: Input the corresponding port ( Default is 4433)



Enable PPPOE: When click Enable PPPOE, the device and HTTP port will mapping to the router automatically



Multicast Add: Input the corresponding multicast address



Multicast Port：Input the corresponding multicast port (Default is 28080)



Device Port: Input the corresponding device port (Default is 5050)



Enable PPPOE: Click to enable PPPOE server

PPPOE server: Input the PPPOE server number

Username: Input the username

Password: Input the password

Confirm pwd: Input the password again to confirm it

After all parameters setting completed, click “Save” and the it comes into effect immediately.

16

Multicast Config

Network High Speed Dome “Multicast Config”setting interface as figure 3-19.

Figure 3-19

Default disabling for multicast config. After click "Enable Multicast", users can set the primary stream video,primary stream audio,

sub stream video, sub stream audio.

DDNS Setting

DDNS is implemented through a dynamic domain resolution server. It requires a PC with fixed IP address on the Internet, on which

the dynamic domain resolution server runs. Network High Speed Domenetwork setting interface as below:

Figure 3-20



Enable DDNS: Click to determine whether to use Dynamic Domain Name Server



Server Type: Select DDNS server type (there are No-IP/ etc. selectable)



Server Name: Input server name



Port: Input port No.



Username: Input user name



Password: Input password (10 char. max)



Confirm pwd: Input the password again to confirm it



Domain: Input the domain name

After all parameters setting completed, click “Save” and the it comes into effect immediately.

La pagina sta caricando ...

Comelit IPPTZ120IR Manuale utente

Questo manuale è adatto anche per

Comelit IPPTZ120IR Manuale utente

in altre lingue

Documenti correlati

Altri documenti