Haier 21F7A Manuale del proprietario

Categoria
TV CRT
Tipo
Manuale del proprietario
COLOUR TV RECEIVER
OWNER'S MANUAL
Please read this manual carefully
before operating the unit, and keep
it for future reference.
The Owner's Manual for the Follow Model:
21F7A
CONTENTS
Before Operation
Basic Operation
Others
Technical operation
Warning and Cautions
Installation
Antenna connection
Preparation for the remote control
Position of keys and plug-ins
Front and side panel
Back panel
the remote control
Power on and power off
Viewing TV programs
Viewing TV programs
Program scan and screen display
Tuning
Automatic search. . .
Manual search
MFT
Skip
Adjusting the picture and the sound
S.C.C,auto off and mute
Setting the Timer
Timer off. .
Setting the other function
and screen protection ......21
Curtain function,calendar display
Channel exchange
Setting the lock
Changing your password
Connecting Additional Equipments
Troubleshooting
Specifications
Using
Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . 1 5
3A filter
Game
Game control buttons and method of playing the game
Multiple sound modes and setting the sound....
Sleep timer and on timer
Channels appointment
Setting the lock
Saving mode.favorite program and shuttle . 9
FM . .........................................................10
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
3. Don't place the
TV set in the
sunshine or near
heat source.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
(additional purchase)
AC power socket
Antenna input
75 standard
coaxial type
Mixer
additional
purchase
Note
* It is recommended that you'd better use 75
* Don't bind antenna cable and electric wire together.
coaxial cable to remove the
disturbance caused by airwave.
Preparation for the remote control
Battery installation
Tips for remote operation
Remove the batteries cover.
! The battery life should be about one year
under normal use.
! When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the batteries
to prevent leakage.
! Do not throw the batteries into a fire.
Dispose of used batteries in the specified
manner.
! Do not drop, dampen or disassemble the
remote control.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
!
!
Back panel
Front panel
Position of Keys and Plug-ins
Power switch
Signal receiver
Power indicator
Menu
TV/AV switch
Volume down/up
Channel down/up
AV
VIDEO
L
AUDIO
R
Antenna input socket
Video Cr input terminal
Audio left channel input terminal
Audio right channel input terminal
Audio left channel output terminal
Audio right channel output terminal
Video Cb input terminal
Video Y input terminal
Video input terminal
Video output terminal
S-VIDEO input terminal
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
ÒôƵ×óÉùµÀÊäÈë¶Ë×Ó
ÒôƵÓÒÉùµÀÊäÈë¶Ë×Ó
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
ÒôƵ×óÉùµÀÊä³ö¶Ë×Ó
Using the Remote Control
TV/AV
DISP
SYSTEM
SCAN
S.STD
P.STD
LOCK
PRE
BACK
CALENDAR
EXIT
QSET
MODE
Buttons and Descriptions
TV and AV Exchange Button
To exchanger between TV and
other available video inputs
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Lock Setting button
Menu Select/ Adjust Button
Use this button to adjust the menu,
the volume and the channels, as well
as to control the game.
Program Play-forward Button
Calendar
Change the aspect ratio
Start/Restart Game Button
Game Exit Button
Program Play-backward Button
Sound Mode Select Button
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
Picture Mode Select Button
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE six modes of picture.
Program Scan Button
DC Standby Button
Sleep Timer Button
GAME
CH+
CH-
VOL+
VOL-
MENU
FAVORITE
Favorite program button
SHUTTLE
FM ZOOM
TDX
/
Game Background Select Button
FM on /off button
No available
No available
Saving mode on/off button
Shuttle button
Power switch
Signal receiver
Power indicator
Menu
TV/AV switch
Volume down/up
Channel down/up
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1. Connect the power supply wire, then press
power switch button, the red power indicator will
light, in several seconds the picture will appear
on the screen.
2. If the TV is in the state of standby, press the
button on the remote control.
3. Press the button on the remote control
to get into the standby status.
4. Press the button on the TV set to
completely turn off the TV.
NOTE
1. You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 11-14).
2. When you do not use the remote control, you can
directly press the CH+/- button on the television to
call off the standby status.
Power supply auto-off function
When the is set ON,
and there is no signal , screen protection
works, and ,in15 minutes later without any
operation, it will change into standby status.
B.B(black background)
DC Standby Button
Direct-digit Choosing Button
VOLUME
COLOR AUTO
SOUND DK
SELECT ADJUST
PRE BACK
SYSTEM
Viewing TV Programs
The channels amount to 218 .
Viewing TV programs
How to select the TV program
1. Use the direct-digit choosing button
2. Use CH+/- button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
3. Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Then, press BACK button, you can return to the channels you
were watching just now (as many as four) .
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
If the color of one channel is abnormal
It might be because the color has been
set improperly.You may follow the
instruction below to adjust it. Press
SYSTEM button, and you can see
the form.
Press CH+/- button, and move the indicator to COLOR,
and press VOL+/- button to select the proper color(AUTO,
NTSC3.58,NTSC4.43 and PAL will appear alternately).
Generally, please set to AUTO.
If the color of the picture is abnormal
MENU
CH+
CH-
VOL- VOL+
Direct-digit Choosing
button
Digit Select
button
Press CH+/- button, and move the indicator to SOUND,
and press VOL+/- button to select the proper color(DK,
I and BG will appear alternately).
If the sound is abnormal
Screen display
SCAN
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Viewing TV Programs(coutinued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan and screen display
Program scanning function
1. If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
the television will start scanning
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2. If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
DISP
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen
and press it again, the channel number will disappear
or disappear automatically in about 5 seconds.
MENU
CH+
CH-
VOL- VOL+
Shuttle
½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔʾ¹¦ÄÜ
Viewing TV Programs(coutinued)
Saving mode.favorite program and shuttle
Saving mode
1. Using the QSET button
Press FAVORITE button for long time to enter the menu
as right figure. Press CH+/- button to select
the favorite program and VOL+/- button to
adjust the channel. You could set 8 favorite
programs.
After the setting, press FAVORITE button
to select your favorite channel you have
set .
Press SHUTTLE for long time to set the program you are
watching as the shuttle channel.
If you want to back to this channel from the current
channel, press SHUTTLE button once .
Press the QSET button to switch the saving mode
on/off. And the screen will display on/off at the
same time.
Press the QSET button more than 3 seconds to
call the ENERGY SAVE menu .
SELECT ADJUST
2.Press VOL+/- button and CH+/-
button to set the options of
AMBI-LUM/ AMBI-SND, after
this, select the ADJUST option
and press VOL+/- button to
display OK, the set is finished.
Note: If the saving mode is on, the buttons P.STD and
S.STD will not work.
Favorite program setting
FAV.POS
QSET
FAVORITE
SHUTTLE
ENERGY SAVE
AMBI-LUM BRI.
AMBI-SND NOISE
ADJUST
FM
FM
FM
3 After searching the program
the screen displays as right
figure, you could press 0 button
according the menu and
displays as right.
4 Press 1-9 to display
the menu. That means
the programs have been
stored.(take 1 for example)
Press FM to enter and press again to exit
Press CH+/- to tune automatically
Press VOL+/- to tune manually, press VOL+/-
to adjust the volume if there is no FM on screen.
button
button button
1 Press FM to enter.
2 Press CH+/- to start to
tune automatically.
button
FM
SEARCHING
FM 106.3MHZ
FM 106.3MHZ
PRESS 0 KEY
TO MEMORIZE
FM- 106.3MHZ
PRESS 1-9 KEY
TO MEMORIZE
FM1 106.3MHZ
MEMORIZED
Note:1. Press VOL+/- to tune manually.
Other steps is the same as the auto tuning.
2. 9 channels could be stored.
button
FM
FM
FM
FM
MENU
CH+
CH-
VOL- VOL+
FM 106.3MHZ
FM
ASM U 0
STOP
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Tuning
Automatic search
1. Press MENU button
continuously until select
TUNING menu.
2. Press CH+/- button to move
the indicator to AUTO
MEMORY.
3. Press VOL+ button, then
AUTO MEMORY mode will
work. The TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel, it may be
the color system has not been set properly, so you
should adjust it to the proper system (Reference to
page 7).
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT CONFIRM
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT CONFIRM
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
Tuning(coutinued)
Manual search
Manual search
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
3. Press CH+/- button and move
the indicator to SEARCH.
4. Press VOL+/- button to start
searching.
VOL- button is used to search the
lower frquency channel.
VOL+ button is used to search the
higher frequency channel.
Repeat the steps until you find
the channel you need.
Direct-digit Choosing
Button
2. Press MENU button
continuously until select
TUNING menu.
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT CONFIRM
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT ADJUST
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
Tuning(coutinued)
MFT
MFT(manual fine tune)
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
1. Press MENU button
continuously until select
TUNING menu.
4. Press CH+/- button and move
the indicator to MFT.
4. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Direct-digit Choosing
Button
2. Press CH+/- button to select
POS EDIT and VOL+ button to
enter.
AA
BB
CC
TUNING
POSITION 1
BAND VL
SKIP ON
MFT UP
SELECT ADJUST
3. Press CH+/- button to select
POSITION and VOL+/- button to select the channel
(Take channel 1 for example)
Note: the same way to adjust the BAND, and VL/VH/U will
appear alternatively..
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT CONFIRM
100.25MHZ
AA
BB
CC
TUNING
POSITION 1
BAND VL
SKIP ON
MFT UP
SELECT ADJUST
100.25MHZ
MENU
CH+
CH-
VOL- VOL+
Tuning(coutinued)
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
1. Press MENU button
continuously until select
TUNING menu.
4. Press CH+/- button and move
the indicator to SKIP.
Skip
5. Press VOL+/- button to set it
ON.
5. Press MENU button to close the menu. When you select
channels with CH+/- button, this channel will be skipped.
However, you can also use the Direct-digit Choosing button on
the remote control to select this channel directly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Direct-digit Choosing
Button
2. Press CH+/- button to select
POS EDIT and VOL+ button to
enter.
3.Press CH+/- button to select
POSITION and VOL+/- button
to select the channel(Take
channel 1 for example)
AA
BB
CC
TUNING
POS. E IT
POS. EX.
SEARCH UP
AUTO MEMORY
D
SELECT CONFIRM
AA
BB
CC
TUNING
POSITION 1
BAND VL
SKIP ON
MFT UP
SELECT ADJUST
100.25MHZ
AA
BB
CC
TUNING
POSITION 1
BAND VL
SKIP ON
MFT UP
SELECT ADJUST
100.25MHZ
MENU
CH+
CH-
VOL- VOL+
Adjusting the Picture and the Sound
Multiple picture modes
How to select the picture mode
You may select the mode you want from the
five preset modes and one individual mode.
DYNAMIC
STANDARD
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
P.STD
MODE
PICTURE QUALITY
DYNAMIC
STANDARD
MILD
MEMORY
PICTURE MUTE
COLOR MUTE
BRIGHT COLOR
MEDIUM COLOR AND BRIGHTNESS
LOW COLOR AND BRIGHTNESS
SET BY YOURSELF
NO PICTURES
BLACK AND WHITE PICTURE
If the picture mode is set to PICTURE MUTE or COLOR
MUTE,it will autorenew to MEMORY mode when you
restart your TV set with remote control.
Set the parameter of MEMORY
2. Press CH+/- button, move the
indicator to the option you want
to adjust, then press VOL+/-
button to do the adjustment.
Then the parameter will be
automatically stored in
MEMORY option.
OPTION
CONTRAST STRONG WEAK
BRIGHT BRIGHT DARK
COLOR THICK LIGHT
SHARP SHARP SOFT
VOL-
VOL+
*The item of TINT appears when the N system signal is received,
and you can adjust it by VOL+/- button.
TINT
PURPLE
GREEN
1. Press MENU button
continuously until select
PICTURE menu, press CH+/-
button to select ADJUST and
VOL+/- button to enter.
AA
BB
CC
PICTURE
ADJUST
3A FILTER
B.B ON
SELECT CONFIRM
AA
BB
CC
PICTURE
CONTRAST 100
BRIGHT 50
COLOR 50
SHARP 50
SELECT ADJUST
Multiple Sound Modes and Setting the Sound
·½±ãµÄͼÏñºÍÉùÒôµ÷Õû¹¦ÄÜ£¨½ÓÉÏÒ³£©
LOW VOL
NORMAL VOL
HIGH VOL
MENU
CH+
CH-
VOL- VOL+
S.STD
Adjusting the Picture and the Sound
(coutinued)
How to select the sound mode
You can quickly select your most favored
sound mode from the following three
kinds of modes.
Press the S.STD button to select the
sound quality that you want.LOW VOL/
NORMAL VOL/ HIGH VOL can be
selected in turn(their parameter may
be adjusted due to your need).
Setting the sound
This function can let you regulate the volume to the
preconcerted parameter quickly( such as the LOW VOL/
NORMAL VOL/ HIGH VOL).
2. Press CH+/- button, move
the indicator to the HIGH
VOL, then press VOL+/-
button to adjust the parameter
you expect. With the same
method, you can adjust the
parameter of the LOW VOL
and NORMAL VOL.
Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL
is C, they should be: 0 A B C 100
3. Press the S.STD button repeatedly to select the
different sound setting modes.
S.STD
1. Press MENU button continuously until select
SOUND menu.
AA
BB
CC
SOUND
LOW VOL 00
NORMAL VOL 00
HIGH VOL 00
BALANCE 50
SELECT ADJUST
You should adjust them in the sequence of HIGH VOL,
NORMAL VOL and LOW VOL .
S.C.C, auto off and mute
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meet guests, using the mute
function is very convenient.
Auto off
MENU
CH+
CH-
VOL- VOL+
Adjusting the Picture and the Sound
(coutinued)
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it is set "ON", the picture will fade in and fade
out when the channel is changed.
2. Press CH+/- button, move
the indicator to the S.C.C,
then press VOL+/- button to
set it ON or OFF.
To prevent from forgetting to turn off the TV, this TV
could turn off automatically. That is , if the off timer is
set on and after two hours without any operation, this
TV will switch into standby mode automatically to
save your energy.
1. Press button, a sign will
appear at the bottom center
of the screen, and the sound of
the TV set is cut off.
2. In order to recover the sound, press button again
or press VOL+/-button.
1. Press MENU button
continuously until select
FUNCTION menu.
AA
BB
CC
FUNCTION
TIMER
AUTO OFF ON
S.C.C OFF
SPECIAL
SELECT ADJUST
Setting the Timer
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
2. Press CH+/- button, move
the indicator to OFF TIMER,
then press VOL+/- button to
set the time.
3. Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
ON/OFF TIMER ).
1. Press MENU button continuously
until select FUNCTION menu,
press CH+/- button to select
TIMER and VOL+/- button to
enter.
AA
BB
CC
TIMER
CLOCK 0:00
OFF TIMER 0:00
ON TIMER OFF
ON POS 0
APP. TIME OFF
APP. POS 0
SELECT ADJUST
AA
BB
CC
FUNCTION
TIMER
AUTO OFF ON
S.C.C OFF
SPECIAL
SELECT CONFIRM
AA
BB
CC
TIMER
CLOCK 0:00
OFF TIMER 0:00
ON TIMER OFF
ON POS 0
APP. TIME OFF
APP. POS 0
SELECT ADJUST
Sleep timer and on timer
On Timer
Sleep timer
2. Press the button repeatedly,
the screen will show in turn as the
right form.
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
Setting the Timer (coutinued)
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1. The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby status and display the preset program.
2. Press CH- button, move
the indicator to ON TIMER.
Then, press VOL+/- button to
set the time.
3. Press CH+/- button, move
the indicator to ON POS,
press VOL+/- button to set
the channel with which the
TV is turned on(take 5 for
example).
4. Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you can set the time(same as
OFF TIMER and it will be the standard of the clock of
ON/OFF TIMER ).
1. Press MENU button continuously
until select FUNCTION menu,
press CH+/- button to select
TIMER and VOL+/- button to
enter.
AA
BB
CC
FUNCTION
TIMER
AUTO OFF ON
S.C.C OFF
SPECIAL
SELECT CONFIRM
AA
BB
CC
TIMER
CLOCK 0:00
OFF TIMER 0:00
ON TIMER OFF
ON POS 0
APP. TIME OFF
APP. POS 0
SELECT ADJUST
AA
BB
CC
TIMER
CLOCK 0:00
OFF TIMER 00:00
ON TIMER OFF
ON POS 0
APP. TIME OFF
APP. POS 0
SELECT ADJUST
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31

Haier 21F7A Manuale del proprietario

Categoria
TV CRT
Tipo
Manuale del proprietario

in altre lingue