Haier 21FA10-AM Manuale utente

COLOUR TV RECEIVER

OWNER'S MANUAL

Please read this manual carefully

before operating the unit, and keep

it for future reference.

The Owner's Manual for the Follow Model:

21FA10-AM

CONTENTS

Before Operation

Basic Operation

Others

Technical operation

Warning and Cautions

Installation

Antenna connection

Preparation for the remote control

Position of keys and plug-ins

Front and side panel

Back panel

the remote control

Power on and power off

Viewing TV programs

Program scan and screen display

Tuning

Automatic search. . .

Manual search

MFT

Skip

Adjusting the picture and the sound

S.C.C auto off and mute

Setting the other function

and screen protection. .

Timer off. . .................................................. 9

Setting the timer

Curtain function, calendar display

Channel exchange

Setting the lock

Changing your password

Connecting Additional Equipments

Troubleshooting

Specifications

.................................... . ..........................................2

..............................................................................................................3

................................... ..........................................................3

.........................................................................3

....................................................................................4

.............................................................................................4

...........................................................................................................4

Using ..........................................................................................5

............................................................................................6

................................................................................................7

............................................................................................7

...................................................................................................................11

...........................................................................................11

...................................................................................................12

...................................................................................................................13

...................................................................................................................14

.........................................................................15

Multiple picture modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . 1 5

........................................................................................18

..........................................................................18

....................................................................................................20

Game

Game control buttons and method of playing the game

.........................................................................28

..................................................................................................29

......................................................................................................30

..............

..........................................................................8

............................. ....

Multiple sound modes and setting the sound.... .................................................. .16

.......................................................................................17

3A filter

.......................................................... 1

Sleep timer and on timer ....................................................................................20

Channels appointment...................................................................................... 21

Background.....................................................................................................22

......................................................................23

.............................................................................................24

.....................................................................................................25

....................................................................................25

Setting the lock..................................................................................................26

...................................................................................................................27

........................................27

Saving mode.favorite program and shuttle . ...........................9

FM . ...............................................................................10

Warning and Cautions

1. When you clean the TV set, please

pull out the power plug from AC outlet.

Don't clean the cabinet and the

screen with benzene, petrol and other

chemicals.

4. To prevent the TV set from firing

and electric shock, don't expose the

TV set to rain or moisture.

2. In order to prolong the using life of

the TV set, please place it on a

ventilated place.

5. Don't open the back cover,

otherwise it is possible to damage the

components in the TV set and harm

you.

3. Don't place the

TV set in the

sunshine or near

heat source.

6. When the TV set isn't going to be

used for long time or it is in thunder

and lightening, please pull out the

plug from AC outlet and the antenna

plug from the cover of the TV set.

Explanation on the display tube

In general, it is not needed to clean the tube surface. However, necessary,

it's surface can be cleaned with a dry cotton cloth after cutting off the power.

Don't use any cleanser. If using hard cloth, the tube surface will be damaged.

Installation

Antenna connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV

system or an outdoor antenna .In different places, the suitable antenna type and position

are different.

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug

(additional purchase)

AC power socket

Antenna input

75 standard

coaxial type

Mixer

additional

purchase

Note

* It is recommended that you'd better use 75

* Don't bind antenna cable and electric wire together.

coaxial cable to remove the

disturbance caused by airwave.

Preparation for the remote control

Battery installation

Tips for remote operation

Remove the batteries cover.

! The battery life should be about one year

under normal use.

! When the remote control will not be used

for a long period of time or when the

batteries are worn out, remove the batteries

to prevent leakage.

! Do not throw the batteries into a fire.

Dispose of used batteries in the specified

manner.

! Do not drop, dampen or disassemble the

remote control.

Insert two size AA batteries matching

the +/-polarities of the battery to the +/-

marks inside the battery compartment.

!

Signal receiver

Power switch

Power indicator

Menu

TV/AV switch

Volume down/up

Channel down/up

Audio left channel input terminal

Audio right channel input terminal

Video input terminal

ÒôÆµ×óÉùµÀÊä³ö¶Ë×Ó

ÒôÆµ×óÉùµÀÊäÈë¶Ë×Ó

ÒôÆµÓÒÉùµÀÊäÈë¶Ë×Ó

ÒôÆµ×óÉùµÀÊä³ö¶Ë×Ó

Audio left channel output terminal

Audio right channel output terminal

Video output terminal

ÒôÆµ×óÉùµÀÊä³ö¶Ë×Ó

Antenna input socket

ÒôÆµ×óÉùµÀÊä³ö¶Ë×Ó

Video Cr input terminal

Video Cb input terminal

Video Y input terminal

S-VIDEO input terminal

Position of Keys and Plug-ins

Back panel

Front and side panel

VIDEO

L

AUDIO

R

VIDEO2

Using the Remote Control

TV/AV

DISP

SYSTEM

SCAN

S.STD

P.STD

LOCK

PRE

BACK

CALENDAR

EXIT

QSET

MODE

Buttons and Descriptions

TV and AV Exchange Button

To exchanger between TV and

other available video inputs

Mute Button

Press to conceal the sound of programs.

Screen Display Button

System Adjust Button

Direct-digit Choosing Button

Directly select channel numbers

Lock Setting button

Menu Select/ Adjust Button

Use this button to adjust the menu,

the volume and the channels, as well

as to control the game.

Program Play-forward Button

Calendar

Change the aspect ratio

Start/Restart Game Button

Game Exit Button

Program Play-backward Button

Sound Mode Select Button

Digit Select Button

Change the channel position number

between one digit, two-digits and three

-digits.

Picture Mode Select Button

There are DYNAMIC, STANDARD,

MILD,MEMORY, PICTURE MUTEand

COLOR MUTE six modes of picture.

Program Scan Button

DC Standby Button

Sleep Timer Button

GAME

CH+

CH-

VOL+

VOL-

MENU

FAVORITE

Favorite program button

SHUTTLE

FM ZOOM

TDX

/

Game Background Select Button

FM on /off button

No available

Saving mode on/off button

Shuttle button

Power On and Power Off

Below are methods on how to power on/off the TV set with the switch on the TV and

on the remote control.

Power on/off

Connect/disconnect to the power

1. Connect the power supply wire, then press

power switch button, the red power indicator will

light, in several seconds the picture will appear

on the screen.

2. If the TV is in the state of standby, press the

button on the remote control.

3. Press the button on the remote control

to get into the standby status.

4. Press the button on the TV set to

completely turn off the TV.

NOTE

1. You can also press the 0-9

button to call off the standby

status instead of pressing the

DC Standby button. Press the

digit button of the preset channel

(limited to one digit) , you can

complete the selection of channel while you turn on the

TV set( To operate the preset of TV channel, please see

TUNING on page 11-14).

2. When you do not use the remote control, you can

directly press the CH+/- button on the television to

call off the standby status.

DC Standby Button

Direct-digit Choosing Button

Signal receiver

Power switch

Power indicator

Menu

TV/AV switch

Volume down/up

Channel down/up

VOLUME

PRE BACK

SYSTEM

Viewing TV Programs

The channels amount to 218 .

Viewing TV programs

How to select the TV program

1. Use the direct-digit choosing button

2. Use CH+/- button

Press CH+ to increase the channel position number.

Press CH- to decrease the channel position number.

Press the button from 0-9 to select a one digit channel.

If you want to select a two-digits channel, press the

Digit Select button and change it into two-digits mode,

then press the number of the channel.

If you want to select a three-digits channel, press the

Digit Select button and change it into three-digits mode,

then press the number of the channel.

3. Use PRE button and BACK button

Press PRE button, you can go back to the channels you

viewed (as many as four).

Then, press BACK button, you can return to the channels you

were watching just now (as many as four) .

For example, if you have viewed channel 1,2,3,4,5,6 after the

TV is powered on, and the channel you are watching now is

number 7, then press PRE button, you can view channel 6,5,

4,3, and you may press the Back button to return to channel 7.

If the channel position number you select is larger than 218,

the TV will use the first two number as the channel position.

Choose the proper volume you like

Press VOL+/- button to adjust the volume.

If the color of one channel is abnormal

It might be because the color has been

set improperly.You may follow the

instruction below to adjust it. Press

SYSTEM button, and you can see

the form.

Press CH+/- button, and move the indicator to COLOR,

and press VOL+/- button to select the proper color(AUTO,

NTSC3.58,NTSC4.43 and PAL will appear alternately).

Generally, please set to AUTO.

If the color of the picture is abnormal

MENU

CH+

CH-

VOL- VOL+

Direct-digit Choosing

button

Digit Select

button

Press CH+/- button, and move the indicator to SOUND,

and press VOL+/- button to select the proper sound.

If the sound is abnormal

COLOR AUTO

SOUND BG

SELECT ADJUST

Screen display

SCAN

½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔÊ¾¹¦ÄÜ

Viewing TV Programs(continued)

Program scanning function is to let the television automatically scan all

preconcerted channel program(about two seconds per channel).

Program scan and screen display

Program scanning function

1. If you want to scan the programs

and select your favorite channel ,

just press the SCAN button, then

the television will start scanning

from the present channel with a

rate of two seconds per channel

and until all the preconcerted

programs have been displayed

once, the TV set will return to the

starting channel.

2. If you want to terminate this

function during the scanning, press

the SCAN button again, and the

program will stay at the present channel.

DISP

Usually, when you press the DISP button, the channel

number will appear on the top right corner of the screen

and press it again, the channel number will disappear

or disappear automatically in about 5 seconds.

MENU

CH+

CH-

VOL- VOL+

Shuttle

½ÚÄ¿ä¯ÀÀ¼°ÆÁÄ»ÏÔÊ¾¹¦ÄÜ

Viewing TV Programs(continued)

Saving mode.favorite program and shuttle

Saving mode

1. Using the QSET button

Press FAVORITE button for long time to enter the menu

as right figure. Press CH+/- button to select

the favorite program and VOL+/- button to

adjust the channel. You could set 8 favorite

programs.

After the setting, press FAVORITE button

to select your favorite channel you have

set .

Press SHUTTLE for long time to set the program you are

watching as the shuttle channel.

If you want to back to this channel from the current

channel, press SHUTTLE button once .

Press the QSET button to switch the saving mode

on/off. And the screen will display on/off at the

same time.

Press the QSET button more than 3 seconds to

call the ENERGY SAVE menu .

2.Press VOL+/- button and CH+/-

button to set the options of

AMBI-LUM/ AMBI-SND, after

this, select the ADJUST option

and press VOL+/- button to

display OK, the set is finished.

Note: 1. After adjusting the item in the ENERGY

SAVE, the energy save function is on

automatically.

2. If the energy save mode is on, the buttons

P.STD and S.STD will not work. The screen

displays ENERGY SAVE ON.

Favorite program setting

FAV.POS

QSET

FAVORITE

SHUTTLE

ENERGY SAVE

AMBI-LUM BRI.

AMBI-SND NOISE

ADJUST

SELECT ADJUST

FM

3 After searching the program

the screen displays as right

figure, you could press 0 button

according the menu and

displays as right.

4 Press 1-9 to display

the menu. That means

the programs have been

stored.(take 1 for example)

Press FM to enter and press again to exit

Press CH+/- to tune automatically

Press VOL+/- to tune manually, press VOL+/-

to adjust the volume if there is no FM on screen.

button

button button

1 Press FM to enter.

2 Press CH+/- to start to

tune automatically.

button

FM

SEARCHING

FM 106.3MHZ

PRESS 0 KEY

TO MEMORIZE

FM- 106.3MHZ

PRESS 1-9 KEY

TO MEMORIZE

FM1 106.3MHZ

MEMORIZED

Note:1. Press VOL+/- to tune manually.

Other steps is the same as the auto tuning.

2. 9 channels could be stored.

button

FM

MENU

CH+

CH-

VOL- VOL+

FM 106.3MHZ

FM

ASM U 0

STOP

MENU

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

There are three ways of searching: automatic search, manual search and MFT

(manual fine tune).

You may operate it either on the TV or on the remote control. Here is mainly about

the remote control.

Automatic search

Tuning

Automatic search

1. Press MENU button

continuously until select

TUNING menu.

2. Press CH+/- button to move

the indicator to AUTO

MEMORY.

3. Press VOL+ button, then

AUTO MEMORY mode will

work. The TV set will search

automatically all available

programs, after that, all

available programs will be

stored in turn and the TV set

will return to the first channel.

If you want to stop the search, just press VOL- button.

The order of the automatic search is due to the frequency

of the program, generally speaking, it is used only at the

first time you search the program, and once the order of

the program has been confirmed, you don't have to use

this function, otherwise the order of the program will be

changed.

After searching

Press CH+/- button to check the channels.

If the color is abnormal in a certain channel, it may be

the color system has not been set properly, so you

should adjust it to the proper system (Reference to

page 7).

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

MENU

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

Tuning(continued)

Manual search

1. Press CH+/- button or the Direct-digit Choosing button to

select a channel directly(take channel 1 for example).

3. Press CH+/- button and move

the indicator to SEARCH.

4. Press VOL+/- button to start

searching.

VOL- button is used to search the

lower frquency channel.

VOL+ button is used to search the

higher frequency channel.

Repeat the steps until you find

the channel you need.

Direct-digit Choosing

Button

2. Press MENU button

continuously until select

TUNING menu.

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

MENU

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

Tuning(continued)

MFT

MFT(manual fine tune)

When you can't get a satisfactory picture and audio effect,

you can fine tune to obtain.

1. Press MENU button

continuously until select

TUNING menu.

4. Press CH+/- button and move

the indicator to MFT.

5. Press VOL+/- button repeatedly to fine tune, until the

picture and the sound become satisfactory.

VOL- button is used to search the lower frquency channel.

VOL+ button is used to search the higher frequency channel.

Direct-digit Choosing

Button

2. Press CH+/- button to select

POS EDIT and VOL+ button to

enter.

POSITION 1

BAND VL

SKIP ON

MFT UP

3. Press CH+/- button to select

POSITION and VOL+/- button to select the channel

(Take channel 1 for example)

Note: the same way to adjust the BAND, and VL/VH/U will

appear alternatively.

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

100.25MHZ

POSITION 1

BAND VL

SKIP ON

MFT UP

100.25MHZ

MENU

CH+

CH-

VOL- VOL+

Tuning(continued)

Skip

After the programs are presetted, you can skip some

programs so that to select your favorite channels only.

1. Press MENU button

continuously until select

TUNING menu.

4. Press CH+/- button and move

the indicator to SKIP.

Skip

5. Press VOL+/- button to set it

ON.

6. Press MENU button to close the menu. When you select

channels with CH+/- button, this channel will be skipped.

However, you can also use the Direct-digit Choosing button on

the remote control to select this channel directly.

If you want to recover the skipped channel

1. Use Direct-digit Choosing button to select the number of the

channel to be recovered.

2. Do the above steps again.

3. Press VOL+/- button to set SKIP OFF.

Direct-digit Choosing

Button

2. Press CH+/- button to select

POS EDIT and VOL+/- button to

enter.

3.Press CH+/- button to select

POSITION and VOL+/- button

to select the channel(Take

channel 1 for example)

TUNING

POS. E IT

POS. EX.

SEARCH UP

AUTO MEMORY

D

POSITION 1

BAND VL

SKIP ON

MFT UP

100.25MHZ

POSITION 1

BAND VL

SKIP ON

MFT UP

100.25MHZ

MENU

CH+

CH-

VOL- VOL+

Adjusting the Picture and the Sound

Multiple picture modes

How to select the picture mode

You may select the mode you want from the

five preset modes and one individual mode.

DYNAMIC

STANDARD

MILD

MEMORY

PICTURE MUTE

COLOR MUTE

Press the P. STD button to select a mode you

like.DYNAMIC PICTURE, STANDARD

PICTURE, MILD PICTURE, MEMORY,

PICTURE MUTE and COLOR MUTE,

totally six picture modes can be selected

alternately.

P.STD

MODE

PICTURE QUALITY

DYNAMIC

STANDARD

MILD

MEMORY

PICTURE MUTE

COLOR MUTE

BRIGHT COLOR

MEDIUM COLOR AND BRIGHTNESS

LOW COLOR AND BRIGHTNESS

SET BY YOURSELF

NO PICTURES

BLACK AND WHITE PICTURE

If the picture mode is set to PICTURE MUTE or COLOR

MUTE,it will autorenew to DYNAMIC mode when you

restart your TV set with remote control.

Set the parameter of MEMORY

2. Press CH+/- button, move the

indicator to the option you want

to adjust, then press VOL+/-

button to do the adjustment.

Then the parameter will be

automatically stored in

MEMORY option.

OPTION

CONTRAST STRONG WEAK

BRIGHT BRIGHT DARK

COLOR THICK LIGHT

SHARP SHARP SOFT

VOL-

VOL+

*The item of TINT appears when the N system signal is received,

and you can adjust it by VOL+/- button.

TINT

PURPLE

GREEN

1. Press MENU button

continuously until select

PICTURE menu, press CH+/-

button to select ADJUST and

VOL+/- button to enter.

PICTURE

ADJUST

3A FILTER

B.B ON

CONTRAST 100

BRIGHT 50

COLOR 50

SHARP 50

Multiple Sound Modes and Setting the Sound

LOW VOL

NORMAL VOL

HIGH VOL

MENU

CH+

CH-

VOL- VOL+

S.STD

Adjusting the Picture and the Sound

(continued)

How to select the sound mode

You can quickly select your most favored

sound mode from the following three

kinds of modes.

Press the S.STD button to select the

sound quality that you want.LOW VOL/

NORMAL VOL/ HIGH VOL can be

selected in turn(their parameter may

be adjusted due to your need).

Setting the sound

This function can let you regulate the volume to the

preconcerted parameter quickly( such as the LOW VOL/

NORMAL VOL/ HIGH VOL).

2. Press CH+/- button, move

the indicator to the HIGH

VOL, then press VOL+/-

button to adjust the parameter

you expect. With the same

method, you can adjust the

parameter of the LOW VOL

and NORMAL VOL.

Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL

is C, they should be: 0 A B C 100

3. Press the S.STD button repeatedly to select the

different sound setting modes.

S.STD

1. Press MENU button continuously until select

SOUND menu.

SOUND

LOW VOL 20

NORMAL VOL 40

HIGH VOL 60

BALANCE 50

You should adjust them in the sequence of HIGH VOL,

NORMAL VOL and LOW VOL .

S.C.C, auto off and mute

How to use the MUTE function

When you want to pay attention to the environment or

answer a telephone, or to meet guests, using the mute

function is very convenient.

Auto off

MENU

CH+

CH-

VOL- VOL+

Adjusting the Picture and the Sound

(continued)

How to use the S.C.C(soft change channel)

This TV set provides you with the function of S.C. C.

When it is set "ON", the picture will fade in and fade

out when the channel is changed.

2. Press CH+/- button, move

the indicator to the S.C.C,

then press VOL+/- button to

set it ON or OFF.

To prevent from forgetting to turn off the TV, this TV

could turn off automatically. That is , if the off timer is

set on and after two hours without any operation, this

TV will switch into standby mode automatically to

save your energy.

1. Press button, a sign will

appear at the bottom center

of the screen, and the sound of

the TV set is cut off.

2. In order to recover the sound, press button again

or press VOL+/-button.

1. Press MENU button

continuously until select

FUNCTION menu.

FUNCTION

AUTO OFF ON

S.C.C OFF

CURTAIN III

3A OPT OFF

Setting the other Function

How to use the 3A filter function

1.Press MENU button

continuously until select

the PICTURE menu. Then

press CH+/- button to move

the indicator to 3A FILTER,

and press VOL+/- button to

enter

MENU

CH+

CH-

VOL- VOL+

ÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜÆÁÄ»ÓïÑÔ¼°ÆÁÄ»±£»¤¹¦ÄÜ

3A filter and screen protection

PICTURE

ADJUST

3A FILTER

B.B ON

3A FILTER USER

2500K -----I-----

3300K -----I-----

5600K -----I-----

6500K -----I-----

7300K -----I-----

8500K -----I-----

9300K -----I-----

12000K -----I-----

15000K -----I-----

SELECT ADJUST

2.Press CH+/- button to move

the indicator to the item you

want to adjust and then

VOL+/- button to adjust it .

Note: FILTER can switch USER, STANDARD,6500K,

7300K, 8500K and 9300K in cycle, and the color

temperature changes when you switch.

Setting the Timer

Timer off

Using this function can turn the TV set automatically

into standby status at the preconcerted time.

MENU

CH+

CH-

VOL- VOL+

MENU

CH+

CH-

VOL- VOL+

This TV set provides you with three timer functions such as timer on, timer off

and sleep off.

Timer off

2. Press CH+/- button, move

the indicator to OFF TIMER,

then press VOL+/- button to

set the time.

1. Press MENU button continuously

until select TIMER menu,

press CH+/- button to select

CLOCK and VOL+/- button to

set the time. (it will be the

standard of the clock of ON/

OFF TIMER.)

TIMER

CLOCK 0:00

OFF TIMER 0:00

ON TIMER OFF

ON POS 0

APP. TIME OFF

APP. POS 0

TIMER

CLOCK 0:00

OFF TIMER 0:00

ON TIMER OFF

ON POS 0

APP. TIME OFF

APP. POS 0

La pagina sta caricando ...

Haier 21FA10-AM Manuale utente

Haier 21FA10-AM Manuale utente

in altre lingue

Documenti correlati

Altri documenti